Sandpiper General Brochure

www.warrenrupp.com 3

Solution Providing Advantages - AODD pumps . . . . . . . . . . . . . . . . 4-5Solution Providing Capabilities . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Primary Markets Served . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Signature Design Platform. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-9Signature Configurations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-11Best Practices - AODD Selection and Sizing . . . . . . . . . . . . . . . . . . 12-15Signature Configuration Features . . . . . . . . . . . . . . . . . . . . . . . . . 16-23 Heavy Duty Ball . . . . . . . . . . . . . . . . . . . . . . . . . . 16-17 Heavy Duty Flap . . . . . . . . . . . . . . . . . . . . . . . . . . 18-19 Containment Duty Ball . . . . . . . . . . . . . . . . . . . . . 20-21 Standard Duty Ball . . . . . . . . . . . . . . . . . . . . . . . . 22-23Best Practices - Recommended Process Control Components . . . . . 24-25 Accessories - Process Control Loop . . . . . . . . . . . . 26-27 Accessories - Tranquilizer/Options . . . . . . . . . . . . 28-29 Accessories - Drum Pump . . . . . . . . . . . . . . . . . . . 30OEM Solutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31Signature Configuration Details . . . . . . . . . . . . . . . . . . . . . . . . . . . 32-51 Heavy Duty Ball . . . . . . . . . . . . . . . . . . . . . . . . . . 32-35 Heavy Duty Flap . . . . . . . . . . . . . . . . . . . . . . . . . . 36-39 Containment Duty Ball . . . . . . . . . . . . . . . . . . . . . 40-43 Standard Duty Ball (Metallic) . . . . . . . . . . . . . . . . . 44-47 Standard Duty Ball (Non-Metallic) . . . . . . . . . . . . . 48-51Special Duty Configuration Details . . . . . . . . . . . . . . . . . . . . . . . . 52-65 High Pressure Pumps. . . . . . . . . . . . . . . . . . . . . . . 52 Filter Press Systems . . . . . . . . . . . . . . . . . . . . . . . 53 UL (Underwriters Laboratory) Pump. . . . . . . . . . . . 54 Non-Clog Wastewater Pumps . . . . . . . . . . . . . . . . . 55 USDA Certified Pumps. . . . . . . . . . . . . . . . . . . . . . 56-57 FDA Material Compliant Pumps . . . . . . . . . . . . . . . 58-59 Mining/Construction Pumps . . . . . . . . . . . . . . . . . . 60-61 Natural Gas Operated Pumps . . . . . . . . . . . . . . . . . 62-65Dewatering Duty Submersible Pumps. . . . . . . . . . . . . . . . . . . . . . . 66After-Market Service Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67AODD Principle of Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68Materials Profile/Recommended Installation . . . . . . . . . . . . . . . . . 69Pump Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70Warranty and Performance Guarantees . . . . . . . . . . . . . . . . . . . . . 71

TABLE OF CONTENTS

2 www.warrenrupp.com

Message to Our Customers

Acknowledging the number of pump types comm

ercially available throughout

the world today, we are renewing our commitmen

t to provide our customers with

technically-sound equipment use, sizing, selection

and application knowledge.

Enabling representativesand customers to make b

etter-informed choices has

been a hallmark commitment from Warren Rupp

, Inc. for the past 40 years.

While there are hundredsof pump types manufactu

red, most can be classified as

either centrifugal or displacement, each having it

s own inherent design strengths

and weaknesses. As a result, our company founde

r, Warren E. Rupp recognized

limitations with a one-design-fits-all approach to s

olving difficult pumping

problems. Thus, the non-positive displacement pu

mp, the air (or natural gas)

powered, double diaphragm SANDPIPER pump r

ange offers our customers a

variety of unique problemsolving Air-Operated Dou

ble Diaphragm (AODD) pump

designs. Today, our coredesigns include heavy du

ty ball, heavy duty flap,

containment duty and standard duty configuratio

ns.

While we acknowledge that even the most divers

e range of AODD pump designs

cannot solve all problems or fill the needs of ever

y pumping application, there is

no other pump type on the market today that is s

o universally applicable and so

responsive to pumping problem fluids.

We are proud to introduce (or maybe even reintro

duce) you to our SANDPIPER

Pump Solutions!

Warren Rupp Team

2005


Informed customers select AODD pumps vs. other pump types when challenged with difficult pumping situations including:

Suspended Solids Non-Suspended Solids Line-Size Solids Abrasive Sludge & Slurries High Viscosity Fluids Dry Running High Suction Lift Floor Space Restrictions

Corrosive Fluids Added Costs for Variable Flow Rates Added Costs for Installation Bypass Lines Added Costs for Pressure Relief High Costs Associated with Packing Glands and Mechanical Seals

Loss of Suction (Prime Damage) Heat Generation Catastrophic Mechanical Seal Failures Leakage from Packed Stufng Boxes Insufcient NPSH (a) Cavitation Coupling Misalignment Bearing Lubrication Contamination Shaft Deections Slip Decreased Volumetric Efciency Bearing/Shaft (load) problems associated with operating below minimum ow Deadheading

AODD pumps are air (or natural gas) operated displacement type pumps which uniquely differ from all other positive displacement pumps. As a result of air pressure acting on the entire surface of the diaphragm, the diaphragm is in a balanced condition while pumping. This measurably extends diaphragm life over that of mechanically operated diaphragm pumps. Because compressed air is limited, the maximum pressure developed by the pump is also safely limited. Thus AODD pumps are appropriately selected for on-demand intermittent requirements.

Although the AODD pump is a displacement type it is actually a hybrid and dees strict classication. While its pressure versus capacity characteristics resemble those of a centrifugal pump, it is best dened as a non (or semi) positive displacement pump. The pumping principle provides 100% efciency at zero ow.

Classification of Pump Types

PositiveDisplacement

Non (Semi) PositiveDisplacement

KineticCentrifugals

Reciprocating

Rotary

Diaphragm(Mechanical)

Piston

Plunger

Vane

Piston

Screw

Gear

Lobe

Diaphragm (AODD)Pumps

SOLUTION PROVIDING ADVANTAGES... Air-Operated Double Diaphragm Pumps


Air-operated double diaphragm pumps safely operate on deadheaded/standby demand without added costs associated with the need to relieve pressure. More importantly, at all deadheaded condition points the AODD pump consumes zero energy (SCFM).

SOLUTION PROVIDING ADVANTAGES... Air-Operated Double Diaphragm Pumps

Solution providing AODD pump installation selected to reduce total costs of ownership and minimize oor space allocation.

Variable ow and head conditions are achievable with the use of inexpensive off- the-shelf air line pressure regulators. Other commonly used ow control methods include restricting discharge and/or suction shutoff valves. Today, AODD pumps are appropriately selected for process control installations as automated control devices have become commercially available.

AODDPUMP

While AODD pumps are self-priming from a dry start, these pumps are frequently installed in ooded suction installations as well as on suction lift installations. With caution given to the non-wetted materials of construction, AODD pumps can be submerged, for maximum installation versatility.


SOLUTION PROVIDING CAPABILITIES

CEATEX CSA UL CE USDA FDA

Pumps abrasive and shear-sensitive materials Low internal velocities handle abrasive slurries with no damage to the pump or loss of volumetric efciencies. The gentle pumping action does not shear fragile materials.

Pumps high viscosity uids Heavy and pourable uids efciently handled

Pumps solids up to 3" line size

Sealless No mechanical seals or packing to leak

Self-priming Maximum dry prime capabilities up to 24 ft. of water

Variable ow & pressure Simply regulate the inlet air supply to adjust the pump ow from zero to maximum rated capacity.

Optional discharge porting Select bottom porting for high concentration of heavy solids. Select top porting for thin liquids, or if entrained air could be a problem.

Runs dry without damage or heat build-up No internal damage

Deadheads against closed discharge Discharge pressures equal to or greater than inlet air pressure stops the pump without damage. Expensive bypass systems & pressure relief valves not required. The pump stops operation until the discharge is opened.

Fully groundable

Portable & submersible

Certications


PRIMARY MARKETS SERVED

Oil & Gas

Food Processing/Biotech/Pharmaceutical

Automotive/Plating & Finishing

Chemical/Petrochemical

Construction/Utilities

Mining

Paint/Ink/Coatings

Ceramic Slip/Glaze

Industrial/Municipal Wastewater Treatment

Pulp/Paper Converters

Heavy Duty Ball Valve

Pumps

Heavy Duty Flap Valve

Pumps

Standard Duty Non-Metallic Pumps

Standard Duty Metallic Pumps

Containment Duty Metallic Pumps


Pressure

Exhaust

Stroke

Pilot/BoostPressureCross-Drilled

Pressure Port

ON-OFF-ON... Reliability - GUARANTEED!Primary system components = main directional air valve

(with cross-drilled pressure ports) & pilot valve

An industry exclusive PERFORMANCE GUARANTEE!

Completely serviceable, IN-LINE

ESADS (Externally Serviceable Air Distribution System)

WARREN RUPP SIGNATURE DESIGN PLATFORM

FEATURES: Independent of the pilot valve position, the cross-drilled pressure ports in the main directional air valve spool provide a pneumatic bias of the spool at either end of travel. This is accomplished by directing (inner) chamber pressure to the end of the spool, boosting and sustaining pilot pressure until point-of-shift of the pilot valve. BENEFITS: Eliminates spool from drifting due to vibration and or unbalanced pressure or system conditions.

Process Reliability Consistent restarts

Complete IN-LINE serviceable Lube Free

Durable, corrosion resistant 416 (Martensitic) and/or 316 (Austenitic) Stainless Steel diaphragm connecting rod - GUARANTEED!

GUARANTEEDnot to yield under Tension Compression Bending Pump Operation


WARREN RUPP SIGNATURE DESIGN PLATFORM

All Bolted Construction

Instant alignment ease of maintenance

Uniform torquing of seal improved seal

Maintains seal after repeated servicing lowers repair costs

Withstands 4 times the pressure versus V-band clamps eliminates leakage at high pressure and deadheaded conditions

EXCLUSIVE Bottom Discharge Porting for difficult solids handling

designs

Standard Duty

Heavy Duty Flap Heavy Duty Ball

restriction of suction check ball valve

broken diaphragm

plates

premature diaphragm failure

resulting from non-uniform

wear

bent rods

solids settle in bottom of

water chamber


ESADS+Plus - Performance Guaranteed - In-line Serviceable Air Valve System

Bolted Construction - Safe - Reliable - Easy Maintenance

Durable, Single-Purpose, Corrosion Resistant, Diaphragm Connecting Rod - Guaranteed

Bottom Discharge Porting - Eliminates Settling Solids

Thick Wall Construction

Horizontal and Vertical Manifold Connections

Free Standing Base - Reduces Downtime - Easy Re-Build

Heavy Duty Wear Package - Extends MTBF

Weighted Ball Check Valves Hinged Flap Check Valves

Solids Range Solids Range +1/4" (6mm) to 7/8" (22mm) +1" (25mm) to 3" (76mm)

Dry Primes up to 20 Feet of Water Dry Primes up to 24 Feet of Water

WARREN RUPP SIGNATURE CONFIGURATIONS

Heavy Duty BallHeavy Duty Flap

Heavy Duty BallHeavy Duty Flap

FEATURES - BENEFITS


WARREN RUPP SIGNATURE CONFIGURATIONS

Containment Duty Ball Standard Duty Ball

ESADS+Plus - Performance Guaranteed - In-line Serviceable Air Valve System

Bolted Construction - Safe - Reliable - Easy Maintenance

Durable, Single-Purpose, Corrosion Resistant, Diaphragm Connecting Rod - Guaranteed

Top Discharge Porting - Eliminates Entrained Air

Metallic and Non-Metallic Materials of Construction

Ball Check Valves Light Weight - Portable

900 - 1800 Manifold Connection Rotation

Containment Chamber with Leak Detection

Hydraulically Balanced/Coupled Pumping and Driver Diaphragm Assemblies

Solids Range+1/4" (6mm) to 3/4" (18mm) Solids Range+1/8" (3mm) to 1/2" (12.7mm)

Dry Primes up to 18 Feet of Water Dry Primes up to 20 Feet of Water

Free Standing Support Base

FEATURES - BENEFITS


A. SELECT PUMP DESIGN

BEST PRACTICES - AODD Pump Selection

Water (base reference)

Suspended Solids B B B

Non-Suspended Solids X X C X

Line Size Solids X X X X X

Sludge / Slurry B C B C

High Viscosity (Flowable Fluids) B B B B B

High B C B CModerate B C B C

Low A B A B

Corrosion B B B B

Permanent B B B B

Portable B

Containment / Prevention C C C C

Flooded Suction B B B B B

Suction Lift B B B B B

Submerged B B B C B C

Intermittent / On-Demand

Continuous

A A A A A A

A (top dischargeporting) A A

A (bottom dischargeporting)




A

A (weighted checkvalves)

A AA AA A

A A

A A

A A A A A

A A

A (weighted checkvalves)

A

A A A A A A

A B B B B B

Erosion / Abrasive Fluids

A = Best Type B = Suitable C = Caution (Limitations) X = Unsuitable

FluidCharacteristic

sDuty

Duty

Installatio

n

Metallic Non-Metallic Non-MetallicMetallic

Containment DutyTop Discharge

Standard DutyTop DischargeHeavy Duty Ball

Bottom DischargeHeavy Duty FlapBottom Discharge

This design selection best practice ensures longest life whether measuring MTBF (mean time between failures), MTBR (mean time between repairs), MTBC (mean time between changes) or MTBM (mean time between maintenance).

A fundamental review of uid characteristics, intended installation, and duty requirements are recommended for best t design selections.


BEST PRACTICES - AODD Pump Selection

0 20 40 60 80 100 120 140 160

20 (34)

40 (68)

60 (102)

80 (136)

100 (170)

600500400300200100

CAPACITY

U.S. Gallons per minute

Liters per minute

100

90

80

70

60

50

40

30

20

10

0

BAR

PSI

HEAD

1

2

3

4

5

6

7

0

30

2025

1015

5

9.1

67.6

34.5

1.5

NPSHR

METE

RS

FEET

40 PSI (2.72 Bar)

20 PSI (1.36 Bar)Air Inlet Pressure

60 PSI (4.08 Bar)

80 PSI (5.44 Bar)

100 PSI (6.8 Bar)

2" Performance CurvePerformance based on water at ambient temperature.

B. SELECT MATERIALS OF CONSTRUCTION Reference the SANDPIPER Chemical Resistance Chart

C. SELECT PUMP SIZE 1) Enter Flow (GPM) and Head (example: 60 GPM @ 40 PSI)

*

2) Approximate energy requirements in Pressure and Volume (example: 62 PSI @50 SCFM)

40

60


Experienced application engineers are available to help you determine the best t pump size for your application. Call our factory or email [email protected].

BEST PRACTICES - SIZING to extend MTBF and... lower total cost of ownership

100

10(17)20(34)

30(51) 40(68)50(85)

60(101.9)

70(118.9)

80(135.9)

90

80

70

60

50

40

30

20

10

00 10 20 30 40 50 60 70 80 90

80 PSI

100 PSI

60 PSI

40 PSI

20 PSI Air Inlet Pressure

1" PERFORMANCECURVE

Liters per minute


CAPACITY

0 100 150 200 250 350

AIR CONSUMPTIONSCFM (M3/hr)B

AR

50 300

HEAD

0

1

2

3

4

5

6

7

PSI

90(152.9)

100 10(17) 20(34)30(51)

40(68)50(85)

60(101.9)

70(118.9)

80(135.9)

90

80

70

60

50

40

30

20

10

00 20 40 60 80 100 120 140


40 PSI

60 PSI

80 PSI

100 PSI

2" PERFORMANCECURVE

Liters per minute


CAPACITY

0 200 300 400 500


AR

100

HEAD

0

1

2

3

4

5

6

7

PSI

90(152.9)

95(161.4)

100(169.9)

20(34)40(68)

60(101.9)80(135.9)

100(169.9)

120(203.9)

140 (237.9)

160(271.8)

180(305.8)

200(339.8)

90

80

70

60

50

40

30

20

10

00 20 40 60 80 100 120 140 160 180 200 220 240 260

100 PSI

80 PSI

60 PSI

40 PSI


100

3" PERFORMANCECURVE

Liters per minute


CAPACITY

0 100 200 300 400 500 600 700 800 900 1000


AR

HEAD

0

1

2

3

4

5

6

7

PSI

Pumping requirements (ow & head) for most applications can be met by multiple sizes of pumps. Talk to Warren Rupps application engineers to assist you with a size selection which best ts your total cost of ownership budget. An appropriately sized-up pump will lower the consolidated initial investment, repair, labor and energy costs. This BEST PRACTICE ensures desirable returns on the initial investment frequently measurable in weeks.

EXAMPLE: 80 GPM @ 30 PSI

*3080

*3080

*3080


BEST PRACTICES - SIZING to extend MTBF and... lower total cost of ownership

Compare the total cost of ownership of 2 to 3 AODD pump sizes, including purchase price, compressed air cost, repair parts cost, and maintenance labor cost. Required inputs are ow rate (gpm), discharge pressure (PSI), air inlet pressure (PSI), air consumption (scfm), displacement per stroke (gal), wet end kit cost, electricity cost ($/kw-hr), labor cost ($/hr) and weekly hours of operation.

INDUSTRY ACCEPTED BEST PRACTICES & ASSUMPTIONS

Maintenance performed every 10 million pump strokes

Two hours of labor required for each rebuild

Step 1: Input Pump Data Pump Model Price ($) Flow Rate Discharge Air Inlet Air Consumption Displacement Wet End Kit Size (gpm) Pressure (PSI) Pressure (PSI) (scfm) per Stroke (gal) Cost ($) A 1" $1,217.00 79 91 0.34 $151.42 B 2" $1,354.00 80 30 60 55 0.43 $249.85 C 3" $3,225.00 37 43 1.8 $508.35

Step 2: Input Cost Data Electricity Cost ($/kw-hr) $ 0.07 Labor Cost ($/hr) $75.00 Weekly Hours of Operation 40

Step 3: View Cost Summary Annual Annual Maintenance Total First Year Pump Annual Air Replacement Maintenance Frequency Weekly Pump Annual Pump Investment (Price Size Consumption Cost Parts Cost Labor Cost (weeks) Operating Cost Operating Cost +Operating Cost) A $1,720.18 $221.70 $220.24 35 $41.58 $2,162.12 $3,379.12 B $ 880.89 $290.23 $174.14 45 $25.87 $1,345.26 $2,699.26 C $ 514.70 $140.89 $ 41.60 188 $13.41 $ 697.18 $3,922.18

Step 4: Evaluate Return on Investment

Additional Investment Payback Period (weeks)

Pump Size B Pump Size A (Higher Price) (Lower Price)

= 8.7 weeks

vs.

Comparative Example


HEAVY DUTY BALL

ESADS+Plus(Externally ServiceableAir Distribution System)Lube Free Durable

Diaphragm Connecting Rod

Weighted ElastomericBall Checks

Bottom DischargePorted

All BoltedConstruction

Warren Rupp Signature Features - in BLUE

Free StandingSupport Base

Rotate Porting Flange 180o to Achieve 90o Vertical Connections



HEAVY DUTY BALL

ESADS+Plus


Bottom Discharge

HD Extended Wear Package (1" to 4")


Durable Diaphragm Connecting Rod

Horizontal and Vertical Manifold Connections

Solids Range +1/4" (6mm) to 7/8" (22mm)

Dry Primes up to 20 Feet of Water


Water (base reference) A

Suspended Solids A (top dischargeporting)

Non-Suspended Solids A (bottom dischargeporting)


Line Size Solids X

Sludge / Slurry

High Viscosity (Flowable Fluids) A (weighted checkvalves)High A

Moderate ALow A

Corrosion B

Permanent A

Portable B

Containment / Prevention C

Flooded Suction A (weighted checkvalves)

Suction Lift B

Submerged B

Intermittent / On-Demand A

Continuous A


FluidCharacteristic

sDuty

Duty

Installatio

n

Heavy Duty BallBottom Discharge

A = Best Type C = Caution (Limitations)B = Suitable X = Unsuitable

Heavy Duty Ball

CONFIGURATION FEATURES


HEAVY DUTY FLAP


Flap Check Valves


ESADS+Plus(Externally ServiceableAir Distribution System)

Lube Free

900-1800 Manifold Connection Rotation

900-1800 Manifold Connection Rotation





HEAVY DUTY FLAP

ESADS+Plus


Bottom Discharge

Flap Check Valves

HD Extended Wear Package (2" to 4")




Solids Range +1" (25mm) to 3" (76mm)




Suspended Solids B

Non-Suspended Solids

Line Size Solids

Sludge / Slurry

High Viscosity (Flowable Fluids) B

HighModerate

Low

Corrosion B

Permanent

Portable

Containment / Prevention C

Flooded Suction B

Suction Lift

Submerged B


Continuous B


FluidCharacteristic

sDuty

Duty

Installatio

n

Heavy Duty FlapBottom Discharge


AAA

A

A

A

A

A



A

Heavy Duty Flap



CONTAINMENT DUTY BALL

Free StandingSupport Base



ESADS+Plus(Externally ServiceableAir Distribution System)

Lube Free

Hydraulically Balanced/ Coupled Pumping and Driver Diaphragm Assemblies



900-1800 Manifold Connection Rotation All Bolted

Construction



ESADS+Plus


Top Discharge

Ball Check Valves

Light Weight - Portable




Solids Range +1/4" (6mm) to 3/4" (18mm)




Suspended Solids


Line Size Solids

Sludge / Slurry

High Viscosity (Flowable Fluids)

HighModerate

Low

Corrosion

Permanent

Portable

Containment / Prevention

Flooded Suction

Suction Lift

Submerged


Continuous


FluidCharacteristic

sDuty

Duty

Installatio

nContainment DutyTop Discharge


B

X X

X X

B C

B B

B CB C

B

B

B B

B B

B B

B C

B B

Metallic Non-Metallic

A A

A

A

A A

A A

A A

A

Containment Duty Ball



STANDARD DUTY BALL ESADS+Plus

(Externally ServiceableAir Distribution System)

Lube Free


1800 Manifold Connection Rotation


900-1800 Manifold

Connection Rotation




STANDARD DUTY BALL

ESADS+Plus All Bolted Construction

Top Discharge Ball Check Valves


Light Weight - Portable


Solids Range +1/8" (2mm) to 1/2" (12.7mm)



Suspended Solids


Line Size Solids

Sludge / Slurry

High Viscosity (Flowable Fluids)

HighModerate

Low

Corrosion

Permanent

Portable

Containment / Prevention

Flooded Suction

Suction Lift

Submerged


Continuous


FluidCharacteristic

sDuty

Duty

Installatio

nStandard DutyTop Discharge


B

C X

X X

B C

B B

B CB C

B

B

B B

C C

B B

B B

B C

B B

Metallic Non-Metallic

A A

A

A A

A

A A

A

Standard Duty Ball

"

Non-Metallic

Metallic



Stroke Counter/Batch Control

WARREN RUPP PUMP CONTROLS

YOUR PLC

4-20 MA

Full line pressure

110/220Vinputs

Solenoid shutdown option

4 VAC (low voltage)

Air linefeed

Air line feedto pump

VisualIndicators

AC or DC220V/5A Max.outputs

120 VACor

220 VACinputs

120 VACor

220 VACinputs

RemoteSTARTSTOP

120 VACor

220 VACoutputs

15 VDC

AudibleAlarmoption

SUCTION

DISCHARGE

Gravimetric Control Pressure Control Level Control PH Control Conductivity Temperature FlowControl Batch Control& Totalizing

sensor

Air Inlet

command input

1. Leak Detection

2. Liquid Level Control

3. Tranquilizer (Surge Dampeners)

4. Mufer Options

5. Pulse Output Kits

1

2

3

4

5

BEST PRACTICES - Recommended Process Control Loop Accessory Components

1


Stroke Counter/Batch Control

WARREN RUPP PUMP CONTROLS

YOUR PLC

4-20 MA

Full line pressure

110/220Vinputs

Solenoid shutdown option

4 VAC (low voltage)

Air linefeed

Air line feedto pump

VisualIndicators

AC or DC220V/5A Max.outputs

120 VACor

220 VACinputs

120 VACor

220 VACinputs

RemoteSTARTSTOP

120 VACor

220 VACoutputs

15 VDC

AudibleAlarmoption

SUCTION

DISCHARGE

Gravimetric Control Pressure Control Level Control PH Control Conductivity Temperature FlowControl Batch Control& Totalizing

sensor

Air Inlet

command input

BEST PRACTICES - Recommended Process Control Loop Accessory Components

6. Stroke Counter/Batch Control

7. Air Line Solenoid

8. Variable Speed Control

9. Filter/Regulator

10. Air Dryer

6

7 8

9 10


At the point the primary pumping diaphragm fails, this modular, watertight unit senses conductivity changes between the driver uid and the pumped uid. Warning lights indicate which side of the pump is tainted. The unit can also be wired for audible alarm or pump shutdown. Low voltage. Simple installation.

A sight tube style leak detector is installed on each driver chamber. If a pumping diaphragm break occurs, liquid in the sight tube changes. This type of leak detection is standard construction on S Non-Metallic Spill Containment pumps.

When a leak chemically attacks an internal o-ring on this detector, it actuates a plunger. This opens an air valve, which in turn activates a customer-supplied solenoid (or similar device) to trigger a signal. For use with the CONTAINMENT DUTY Spill Containment SANDPIPER pumps ONLY.

Non-Metallic Surge DampenersDesigned for use with ", " and 1" pumps, these dampeners are manually charged with air. PTFE diaphragms are standard, with wetted parts available in Polypropylene, PVDF, and Nylon. The DA05 is also available in Aluminum and Stainless Steel. Flow and pressure uctuations are minimized, the dampener consumes no air after initial charging. Hardware is 302/304 Stainless Steel.

1. LEAK DETECTION

Electronic

Visual

Mechanical

Warren Rupps oat actuated liquid level control provides all-pneumatic operation. Especially useful in sump and liquid transfer situations, the oat actuated switch opens and closes air supply to the pump for positive ON-OFF response. High capacity air valve accommodates air ow requirements up to 125 cfm, with a pressure drop less than 10 PSI.

2. LIQUID LEVEL CONTROL

3. TRANQUILIZERMetallic Surge SuppressorsFor use with any reciprocating pump, Tranquilizer surge suppressors maintain a constant air cushion volume in a pumping application for the most effective surge suppression. All Tranquilizer models are automatically self-charging and self-venting. Flexible diaphragm separates air cushion from pumped product.

Accessories - Process Control Loop

Part #032.XXX.000.

Standard

Part #031.XXX.110.

Part #032.036.000.

Part # TA-1, TD-1, TA-2, TA-3

Part # DA05, DA07 & DA10


Effective sound dampening for Warren Rupp pumps. Mufers are a rugged Polymer or metallic housing. Sound dampening and encapsulated mufers have replaceable acoustic composite inserts. All Warren Rupp pumps are supplied with a basic mufer. Meets OSHA dBA requirements.

4. MUFFLER OPTIONS

Offered in a wide variety of sizes and voltages. These controls interface with the Warren Rupp Batch Controller, or your own process controls (PLCs).

Available in kits, for eld installation, or factory built into a new pump.

5. PULSE OUTPUT KITS

Transforms your diaphragm pump into an accurate, controllable pump system. Uses interfaceable, user-friendly components in your process control systems and existing or new pumps. It eliminates troublesome and expensive

ow-sensing devices. The Stroke Counter/Batch Control is an interfaceable electronic control to program repetitive diaphragm pump operations. This industrial-grade control offers performance and repeatability. Compatible with all Warren Rupp air-operated diaphragm pumps. The control unit functions as a batch control, a stroke counter, or both. The complete system requires the Stroke Counter/Batch Controller, the Pulse Output Kit & the Air line Solenoid.

6. STROKE COUNTER/ BATCH CONTROL

Provides automatic on/off operation of air-driven equipment. 110/120VAC and 220/240VAC (50/60 hertz) kits operate with the Warren Rupp or customers control units. 12VDC and 24VDC kits operate with customer-supplied controls only.

7. AIR LINE SOLENOID

Easy installation and operation. Fits most air-operated diaphragm pumps with operating pressures to 125 PSI. Accurate control of variable ow rates, from zero ow to maximum. Operates on 110 or 220VAC. Manual operation with on-board, single turn potentiometer or automatic mode for remote control using the optional 4-20 mA input terminal. Speed Control System can be integrated with existing process control systems

8. ELECTRONIC SPEED CONTROL

Clean, dry air is the key to trouble-free pump operation. The Warren Rupp Filter/Regulator line offers modular convenience for easy installation and service.

9. FILTER/REGULATOR

This point-of-use air dryer is designed to remove 99% of the water, rust and other contaminants commonly present in compressed air lines. Clean, dry air enhances the life and performance of pneumatically-driven equipment.

10. AIR DRYER

Part #894.XXX.000.

Part #530.XXX.000.

Part # 475.XXX.XXX.

Part # 032.XXX.000.

Part # 020.XXX.XXX.

Part # 020.XXX.XXX.

Part # 249.006.000.


Accessories - TRANQUILIZER

Surge Suppression for AODD Pumps

TD1

TA2

TA3

TA1

OPERATING PRINCIPLE

An air cushion is established by liquid pressure pushing the diaphragm upward. This allows air to enter the chamber. The balancing air cushion keeps the diaphragm centered at mid stroke.

During operation, the diaphragm(s) flex within the mid-range position, absorbing and equalizing discharge surge.

If pressure changes in the system, the air cushion pressure compensates, automatically increasing or decreasing. If liquid pressure is released, air in the suppressor chamber exhausts into the atmosphere.

Properly sized and installed, Tranquilizers provide virtually surge-free discharge flow.

Virtually surge-free flows

Steadier pressures

Less vibration and noise

Simple installation

Variety of sizes and materials

Automatically self-charging and self-venting

Longest life balanced diaphragm


AL= AluminumB = Buna NC = Cast Iron

WR-C = Alloy C (Hastelloy-C)WR-S = Alloy 316 Stainless Steel

T = Virgin PTFEV = Viton

Also available fromWarren Rupp: Surge Dampeners for smaller pumps. Ask about the DA Series of Surge Dampeners. Now availablein Aluminum, Polypropylene, PVDF and Stainless Steel.

125 psi8.6 barSelf-

charging.Self-

venting.

"NPT

(externalthread)

1"BSPT

(taperedinternalthread)

20" to23 3/16" height(514mm to589mm)

12" diameter(317mm) NPT(F)

TA1Designed for1" pumps.13" air inlethose whip line

supplied.

125 psi8.6 barSelf-

charging.Self-

venting.

"NPT

(externalthread)

1"NPT

13 5/8" to15 1/8" height(346mm to384mm)


TA3Designed for3" and 4"pumps.

13" air inlet hosewhip line supplied.

"NPT

125 psi8.6 barSelf-

Charging.Self-

venting.

3"BSPT

(taperedinternal

thread) or80mm

DIN-styleFlange

20 1/8" to23 1/8" height(511mm to587mm)16 3/16"diameter

(411mm) NPT(F)

125 psi8.6 barSelf-

charging.Self-

venting.

"NPT

(externalthread)

1"BSPT


13 5/8" to15 1/8" height(346mm to384mm)


TA25Designed for1" pumps.13" air inlethose whip line

supplied.

TD1Designed for

1" and 1" pumps.11" air inlethose whip line

supplied.

125 psi8.6 barSelf-

charging.Self-

venting.

"NPT

(externalthread)

1"NPT

(internalthread)

19 7/8" to21 3/8" height(505mm to543mm)


19 7/8" to21 3/8" height(505mm to543mm)




125 psi8.6 barSelf-

charging.Self-

venting.

"NPT

(externalthread)

2"NPT

(internalthread)



125 psi8.6 barSelf-

charging.Self-

venting.

"NPT

2"BSPT


20" to23 3/16" height(514mm to589mm)


3"150# Ansi-style flange

or 3"NPT

internalthread



125 psi8.6 barSelf-

Charging.Self-

venting.

"NPT

20 1/8" to23 1/8" height(511mm to587mm)16 3/16"diameter

(411mm) NPT(F)

TD40Designed for

1" and 1" pumps.11" air inlethose whip line

supplied.

E = EPDMN = NeopreneT# = Overlay, Neoprene with Virgin PTFE

TRANQUILIZER Options

Viton is a registered tradename of E.I. duPont.


Accessories - DRUM PUMP

Pail & Drum KitsConverting our ", " and " plastic pumps to a drum or pail application is easy. The adaptor kits are constructed of chemically-resistant materials to handle the job. Plastic pipe assembly comes complete with all the hardware needed. Simply attach the threaded end to the suction manifold and lower it into the liquid source.

The 55-gallon Drum Transfer Kit includes pump support legs to minimize the vibration occurring in a diaphragm pump.

The 120# Barrel Transfer Kit includes a lid with adjustment screws for a snug t every time.

Pail mounted SANDPIPER Pumps installed on paint spray booth station.

Part # 031.091.000.

Part # 475.161.XXX.475.196.XXX.

The Pail Transfer Kit also includes a lid with adjustment screws, plus handles for easy mobility.

Part #

475.149.XXX.

475.150.XXX.

475.151.XXX.

475.194.XXX.

475.195.XXX.


OEM Solutions

We offer existing products, modied products and custom built products. Whether you need private labeling, special accessories, or an entire system, let our experienced staff assist you in meeting your special needs.

ENGINEERING SERVICES Experienced Engineering staff Latest Cad/Cam design equipment with 3-D modeling Cad library Precise laboratory test equipment

TECHNICAL SERVICES Experienced staff for technical support Available in-house and eld service analysis Worldwide service support

MANUFACTURING SERVICES Latest in CNC capabilities Quick turnaround to meet customer scheduling needs Just-in-time scheduling available. Custom packaging Fabrication experience

FLEXIBLE KANBAN AGREEMENTS

Standard Special blanket pricing available on

standard pumps in larger quantities.

Special Special material combinations,

construction, painting and labeling.

CustomCustom built, multi-pump systems. Customized shipping materials and xtures to t your manufacturing process.

Warren Rupp built system, with controls, accessories and special connections

SANDPIPER OEM pumps supplied on paint industry dispensing systems

Complete private labeled pumps include name plates, service and operating manuals, shipping cartons and paint & coatings options.

Warren Rupp has worldwide experience manufacturing pumps for OEM customers.


HEAVY DUTY BALL

HDB (SB) Metallic Pumps are ideal for thin to viscous and small solids laden uids. SANDPIPER Heavy Duty Ball Valve Pumps provide superior suction lift capability and exclusive variable porting options (side, top, bottom and dual). HDB pumps are thick wall constructed of Sand Casted Aluminum, Cast Iron, Stainless Steel or Alloy C with elastomer, TPE (thermal plastic elastomers) and PTFE options in diaphragms and check valves. HDB pumps are enhanced with an extended wear package.

3" HDB bottom discharge ported pump installed as a plate & frame lter press,

pre-coat supply pump.

HDB4-A (SB4-A)Top Ported

HDB3-A (SB3-A)Bottom Ported

HDB2-A (SB2-A)Top Ported



SB1-ABottom Ported ATEX 100aCompliant


PUMPMODELS

A B C D E

ConnectionStyle

PipeSize

DisplacementPer Stroke

MaxFlow

Per Minute

MaxSolids

Handling

MaxDischargePressureHeight Width Depth

Bottom of Base to Center Line of: Suction Discharge

inches (mm) inches (mm) inches (mm) inches (mm) inches (mm) inch (mm) gal (liter) gal (liter) inch (mm) PSI (bar)

SB1-A/SB25A 14 7/16 (367) 11 3/4 (298) 13 9/32 (337) 5 1/4 (133) 13 (330) 1" NPT/BSP 1 (25) .09 (.34) 42 (159) .25 (6) 125 (8.6)

SB1-A TOP SB1-A BOTTOM

13 1/2 (342)13 11/16 (347)

11 3/4 (298) 11 3/4 (298)

14 7/8 (378) 14 7/8 (378)

5 5/8 (142) 27/32 (21)

13 1/2 (342) 8 7/16 (214)

1" NPT/BSP 1" NPT/BSP

1 (25) 1 (25)

.09 (.34)

.09 (.34)42 (159) 42 (159)

.25 (6)

.25 (6)125 (8.6) 125 (8.6)

SB1-A/SB40A 13 13/16 (351) 15 1/2 (394) 14 1/8 (359) 2 1/4 (57) 12 3/16 (310) 1" NPT/BSP 1.5 (40) .34 (1.29) 90 (340) .25 (6) 125 (8.6)

HDB1-A TOPHDB1-A BOTTOM

19 7/32 (488) 18 9/16 (471)

15 1/2 (419) 15 1/2 (419)

17 (432) 17 (432)

8 9/64 (207) 6 9/64 (156)

18 5/64 (459) 16 (406)

1" NPT/BSP 1" NPT/BSP

1.5 (40) 1.5 (40)

.34 (1.29)

.34 (1.29)90 (340) 90 (340)

.25 (6)

.25 (6)125 (8.6) 125 (8.6)

SB2-A TOP HDB2-A TOP

22 3/16 (564) 15 1/2 (394) 16 13/16 (427) 9 1/8 (232) 20 7/8 (530) 2" NPT 2 (50) .43 (1.63) 135 (511) .38 (9) 125 (8.6)

SB2-A BOTTOM HDB2-A BOTTOM

23 1/4 (591) 15 1/2 (394) 16 13/16 (427) 3 7/16 (87) 15 3/16 (386) 2" NPT 2 (50) .43 (1.63) 135 (511) .38 (9) 125 (8.6)


37 1/8 (943) 26 (661) 20 3/4 (527) 20 (509) 33 3/8 (848) 3" 125# ANSI 3 (80) 1.8 (6.81) 260 (984) .87 (22) 125 (8.6)


31 1/4 (794) 26 (661) 24 5/8 (625) 5 3/4 (146) 19 3/8 (492) 3" 125# ANSI 3 (80) 1.8 (6.81) 260 (984) .87 (22) 125 (8.6)


37 7/8 (962) 26 (661) 23 3/4 (603) 20 (509) 33 3/8 (848) 4" 125# ANSI 4 (100) 1.8 (6.81) 260 (984) .87 (22) 125 (8.6)


31 1/4 (793) 26 (661) 27 1/2 (699) 5 3/4 (146) 19 3/8 (492) 4" 125# ANSI 4 (100) 1.8 (6.81) 260 (984) .87 (22) 125 (8.6)

C B

A

D

E

C

A

Top Ported Bottom Ported Front View of Bottom Ported

90o - 180o rotation

90o - 180o rotation

90o - 180orotation

90o - 180o rotation

Dimensional Detail

All Dimensions +/- 1/8 (3)


HEAVY DUTY BALLMODEL SB1-A / SB25A

PERFORMANCE CURVE100 10(17)15(25.5)

20(34)

25(42.5)

30(51)

35(59.5)

40(68)

90

80

70

60

50

40

30

20

10

00 4 8 12 16 20 24 28 32 36 40

100 PSI

80 PSI

60 PSI

40 PSI


Liters per minute


CAPACITY

0 50 75 100 125 150


AR

25

HEAD

0

1

2

3

4

5

6

7

PSI

45(76.5)

50(85)

MODEL SB1-A / SB40APERFORMANCE CURVE100

10(17)20(34)

30(51) 40(68)50(85)

60(101.9)

70(118.9)

80(135.9)

90

80

70

60

50

40

30

20

10

00 10 20 30 40 50 60 70 80 90

80 PSI

100 PSI

60 PSI

40 PSI


Liters per minute


CAPACITY

0 100 150 200 250 340


AR

50 300

HEAD

0

1

2

3

4

5

6

7

PSI

90(152.9)

SB1-APerformance Curve

HDB bottom discharge ported pumps with tranquilizers installed at an industrial waste treatment facility.

HDB1-A (SB1-A)Performance Curve


MODEL SB3-A / SB4-APERFORMANCE CURVE20(34) 40(68)

60(101.9)80(135.9)

100(169.9)

120(203.9)

140 (237.9)

160(271.8)

180(305.8)

200(339.8)

90

80

70

60

50

40

30

20

10

00 20 40 60 80 100 120 140 160 180 200 220 240 260

100 PSI

80 PSI

60 PSI

40 PSI


100

Liters per minute


CAPACITY

0 100 200 300 400 500 600 700 800 900 1000


AR

HEAD

0

1

2

3

4

5

6

7

PSI

MODEL SB2-APERFORMANCE CURVE100 10(17) 20(34)

30(51)40(68)

50(85)60(101.9)

70(118.9)

80(135.9)

90

80

70

60

50

40

30

20

10

00 20 40 60 80 100 120 140


40 PSI

60 PSI

80 PSI

100 PSI

Liters per minute


CAPACITY

0 200 300 400 500


AR

100

HEAD

0

1

2

3

4

5

6

7

PSI

90(152.9)

95(161.4)

100(169.9)

HDB2-A (SB2-A)Performance Curve

HDB3-A (SB3-A) & HDB4-A (SB4-A) Performance Curve

1" ball valve pumps installed in a paint mixing and tinting operation.


HEAVY DUTY FLAP

HDF (SA) Pumps are recommended for abrasive slurries, suspended and non-suspended solids and line size solids requirements. All HDF (SA) pumps are congured in bottom discharge porting arrangements. HDF pumps are thick wall constructed of Sand Casted Aluminum, Cast Iron and Stainless Steel with elastomer, TPE (thermal plastic elastomers) and PTFE options in diaphragms and check valves. HDF pumps are enhanced with an extended wear package.

HDF4-A (SA4-A)

HDF2-A (SA2-A)

HDF3-A (SA3-A)

Heavy duty ap valve pumps

with tranquilizers permanently installed

in an automotive industrial waste

treatment facility.

ATEX 100aCompliant


CB

E

AD

90o - 180o rotation90o - 180o rotation

Dimensional Detail

PUMPMODELS

A B C D E

ConnectionStyle

PipeSize


MaxFlow

Per Minute

MaxSolids

Handling



inches (mm) inches (mm) inches (mm) inches (mm) inches (mm) inch (mm) gal (liter) gal (liter) inch (mm) psi (bar)

SA1-A/SA25A 14 7/16 (367) 11 3/4 (298) 10 13/16 (275) 3 3/16 (81) 3 3/16 (81) 1" NPT/BSP 1 (25) .09 (.34) 42 (159) 1 (25) 125 (8.6)

SA2-A HDF2-A

20 5/16 (516) 21 3/4 (552) 13 5/8 (346) 17 11/16 (449) 2 9/16 (65) 2" NPT only 2 (50) .43 (1.60) 140 (530) 2 (50) 125 (8.6)

SA3-A HDF3-A

29 1/2 (749) 36 9/16 (929) 16 1/4 (413) 25 3/4 (654) 4 1/4 (108) 3" 125# ANS 3 (80) 1.62 (6.15) 260 (988) 3 (76) 125 (8.6)

SA3-M HDF3-M

30 1/4 (768) 32 5/16 (821) 16 3/16 (411) 26 1/2 (673) 5 (127) 3" 125# ANSI 3 (80) 1.23 (4.66) 260 (988) 3 (76) 125 (8.6)

SA4-A HDF4-A

31 (787) 36 9/16 (929) 21 1/4 (540) 26 1/2 (673) 5 (127) 4" 125# ANSI 4 (100) 1.62 (6.15) 260 (988) 3 (76) 125 (8.6)

SA4-M HDF4-M

31 (787) 32 5/16 (821) 16 3/16 (411) 26 1/2 (673) 5 (127) 4" 125# ANSI 4 (100) 1.23 (4.66) 260 (988) 3 (76) 125 (8.6)



MODEL SA3-APERFORMANCE CURVE

10

0

20

30

40

50

60

70

80

90

200 40 60 80 100 120 140 160 180 200 220 240 260

20(34) 40(68)60(101.9)

80(135.9)

100(169.9)

100 PSI

80 PSI

60 PSI

40 PSI


100

Liters per minute


CAPACITY

0 100 200 300 400 500 600 700 800 900 1000


AR

HEAD

0

1

2

3

4

5

6

7

PSI

120(203.9)

MODEL SA1-A / SA25APERFORMANCE CURVE

40(68)

35(59.5)

15(25.5)10(17)

20(34)25(42.5)

30(51)

90

80

70

60

50

40

30

20

10

00 4 8 12 16 20 24 28 32 36 40

100 PSI

80 PSI

60 PSI

40 PSI


45(76.5)

50(85)

100

Liters per minute


CAPACITY

0 50 75 100 125 150


AR

25

HEAD

0

1

2

3

4

5

6

7

PSI

HEAVY DUTY FLAP

SA1-A Performance Curve

HDF3-A (SA3-A) &HDF4-A (SA4-A) Performance Curve

HDF2-A (SA2-A) Performance Curve

MODEL SA2-A /MSA2PERFORMANCE CURVE

40 PSI

60 PSI

80 PSI

100 PSI

10

0

20

30

40

50

60

70

80

90

100

200 40 60 80 100 120 140 160

10(17) 20(34)30(51)

40(68)50(85)

60(101.9)70(118.9)

80(135.9)90(152.9)

100(169.9)

150(254.9)20 PSI Air Inlet Pressure

Liters per minute


CAPACITY

0 200 300 400 500 600

AIR CONSUMPTIONSCFM (M3/hr)

BAR

100

HEAD

0

1

2

3

4

5

6

7

PSI

125(212.4)


HDF3-M (SA3-M)HDF4-M (SA4-M)

Performance Curve

MODEL SA3-M / SA4-MPERFORMANCE CURVE


10

00

20

30

40

50

60

70

80

90

100

20 40 60 80 100 120 140 160 180 200 220 240 260

20(34)

60 PSI

40 PSI

40(68)60(101.9)

80(135.9)

100(169.9)

120(203.9)

140(237.9)

160(271.8)

180(305.8)


100 PSI

80 PSI

Liters per minuteCAPACITY

0 100 200 300 400 500 600 700 800 900 1000

AIR CONSUMPTIONSCFM (M3/hr)P

SI

BAR

HEAD

0

1

2

3

4

5

6

7

200(339.8)

Heavy duty ap valve pump installed on an underow sludge transfer application.

Heavy duty ap valve pump temporarily installed pumping settling pond sludge. (Perfect alignment not required).



PUMPMODELS

A B C D E

ConnectionStyle

PipeSize


MaxFlow

Per Minute

MaxSolids

Handling



inches (mm) inches (mm) inches (mm) inches (mm) inches (mm) inch (mm) gal (liter) gal (liter inch (mm) psi (bar)

ST1-A/ST25A 14 13/32 (366) 14 17/32 (369) 14 9/32 (363) 5 1/4 (133) 13 (330) 1" NPT/BSP 1 (25) .09 (.34) 42 (159) .25 (6) 125 (8.6)

ST1-A/ST40A 17 1/2 (445) 16 1/2 (419) 18 5/8 (473) 5 9/32 (134) 15 15/64 (387) 1" NPT/BSP 1.5 (40) .30 (1.14) 90 (340) .25 (6) 125 (8.6)

S1F 20 3/4 (527) 21 3/4 (553) 12 1/16 (306) 2 1/2 (64) 20 3/4 (527) 1" 125# ANSI 1 (25) .17 (64) 45 (170) .25 (6) 100 (6.9)

S15 28 11/16 (729) 28 5/8 (728) 15 1/4 (387) 3 1/2 (89) 28 11/16 (729) 1" 125# ANSI 1.5 (40) .36 (1.36) 90 (340) .47 (12) 100 (6.9)

S20 32 1/16 (814) 29 3/8 (746) 15 1/4 (387) 3 13/16 (96) 32 1/16 (814) 2" 125# ANSI 2 (50) .36 (1.36) 150 (568) .66 (17) 100 (6.9)

S30 40 5/8 (1032) 37 15/16 (964) 19 5/8 (498) 4 7/8 (124) 40 5/8 (1032) 3" 125# ANSI 3 (80) .9 (3.41) 238 (901) .71 (18) 100 (6.9)

Containment Duty Non-Metallic Pumps are ideal for highly corrosive and hazardous chemical uid requirements. All CD duty pumps are exclusively designed with containment chambers, hydraulically balanced/coupled pumping diaphragm and driver diaphragm assemblies. All containment chambers are designed to accommodate visual, mechanical and low voltage leak detection devices. CD pumps are constructed of Aluminum, Cast Iron, Stainless Steel, Alloy C, Polypropylene and Kynar with TPE (thermal plastic elastomers), PTFE options in diaphragms and check valves.

Containment Duty Pumps additional FEATURES and BENEFITS

A

D

E

B C

90o - 180o rotation

S20

S1F

S30

S15

ST1

ST1

Spill Containment Safe pumping of aggressive, unpredictable, hazardous or toxic liquids. Chambers keep accidental spills from entering the air valve, protecting plant environment and personnel. Allows the pump to complete the batch or operation in progress, before repair has to be done.Hydraulically Balanced/Coupled Diaphragms Pumping diaphragms are balanced on suction and discharge stroke. Evenly distributed pressure over the surface of the diaphragm gives longer ex life.Save Money and Downtime Protects air valve parts from contamination, meaning fewer service parts and less maintenance time. Longer ex life of the diaphragm means less frequent routine servicing.Leak Detection - See page 41



How visual leak detection works.

At a point the pumping diaphragm fails, pumped liquid enters the spill chamber, displacing driver uid. The exchange of pumpage and driver uid displays a color change in the sight tube, giving a visible signal. Driver uid should be chemically compatible with the pumped uid, with an obvious difference in color. In the event a leak occurs, pumpage is contained in the spill chamber. The pump will continue to work, and in many cases, repairs can be done when the batch is completed. The air valve and work environment are protected.

How electronic leak detection works.

At a point the pumping diaphragm fails, pumped liquid enters the spill chamber displacing driver uid. The leak detector, working on the principle of conductance, senses the conductivity change. This activates a warning light on the control box. The device can also be wired into the pump users existing system, for an audible or visual alarm, or pump shut-down response. It is important to specify an appropriate drive uid which is both chemically compatible with the pumped uid and displays the opposite conductance properties. Polarity of the leak detector can be set to sense conductive or non-conductive uid. If a leak occurs, pumpage is contained in the spill chamber. The pump will continue to work, and in many cases, repairs can be done when the batch is completed. The air valve and work environment are protected.

Visual Leak Detection

Leak Detection Operating PrincipleElectronic Leak Detection

VISUAL LEAK DETECTOR: A sight tube style leak detector is installed on each driver chamber. If a pumping diaphragm break occurs, liquid in the sight tube changes color.

ELECTRONIC LEAK DETECTOR: Working on the principle of conductance, this monitor can be wired for visual, audible or pump shut-down response. The electronic leak detector is an optional accessory which can be installed on all models.

MECHANICAL LEAK DETECTOR: When a leak chemically attacks an internal o-ring on this detector, it actuates a plunger. This opens an air valve, which in turn activates a customer-supplied solenoid (or similar device) to trigger a signal.

Chamber lled with driver uid

OuterPumpingChamber

Pumpingdiaphragm

Driverdiaphragm

Clearsite tube

Driverdiaphragm

Pumpingdiaphragm

OuterPumpingChamber

Chamber lled with driver uid


MODEL ST1-A / ST40APERFORMANCE CURVE100

90

10(17)20(34)

30(51) 40(68)50(85)

60(102)

70(119)

80(136)

80

70

60

50

4030

20

10

00 10 20 30 40 50 60 70 80 90

100 PSI


40 PSI

60 PSI

80 PSI

90(152.9)

US Gallons per minute


HEAD

0 50 100 150 200 250 300 350

0

1

2

3

4

5

6

7


SI

BAR


ST1-A Metallic Performance Curve

MODEL ST1-A / ST25APERFORMANCE CURVE100 10(17)

15(25.4)20(34)

25(42.5)

30(51)

35(59.5)

40(68)

90

80

70

60

50

40

30

20

10

00 4 8 12 16 20 24 28 32 36 40


40 PSI

60 PSI

80 PSI

100 PSI

45(76.5)

50(85)

US Gallons per minute


HEAD

0 20 40 60 80 100 120 140 150

0

1

2

3

4

5

6

7


SI

BAR

ST1-A Metallic Performance Curve

S1F Non-MetallicPerformance Curve

MODEL S1F Non-Metallic Performance CurvePerformance based on water at ambient temperature.5 (8.5)

10 (17)

30 (51)

15 (25.5)

25 (42.5)

35 (59.5)

40 (68)

35 40 45 50 55302520151050

CAPACITY


Liters per minute

100

100 110 120 130 140 150 160 170 180 190 200

90

90

80

80

70

70

60

60

50

50

40

40

30

30

20

20

10

10

0

0

BAR

PSI

HEAD

1

2

3

4

5

6

7

0

30

2025

1015

5

9.7

67.6

34.5

1.5

NPSHR

FEET

METE

RS

100 PSI (6.8 Bar)

60 PSI (4.08 Bar)

80 PSI (5.44 Bar)

40 PSI (2.72 Bar)

Air Inlet Pressure

20 PSI (1.36 Bar)

20 (34)

45 (76.5)


SI5 Non-MetallicPerformance Curve

MODEL S20 Non-Metallic Performance CurvePerformance based on water at ambient temperature.

0 20 40 60 80 100 120 140 160

10 (17)20 (34)

40 (68)

60 (102)

70 (119)

80 (136)

90 (153)

95 (161.5)

75 (127.5)

600500400300200100

30 (51)

50 (85)

CAPACITY


Liters per minute

100

90

80

70

60

50

40

30

20

10

0

BAR

PSI

HEAD

1

2

3

4

5

6

7

0

30

2025

1015

5

9.1

67.6

34.5

1.5

100 PSI (6.8 Bar)80 PSI (5.44 Bar)60 PSI (4.08 Bar)40 PSI (2.72 Bar)


NPSHR

FEET

METE

RS

S30 Non-MetallicPerformance Curve



10 (17)

55(93)

45(76)

65 (110)

40 (68)

30 (51)

20 (34)

60 (102)

50 (85)

55 (93)

58 (99)

69 (117)

70 80 906050403020100

CAPACITY


Liters per minute340 360 380320300280260240220200180160140120100806040200

100

90

80

70

60

50

40

30

20

10

0

BAR

PSI

HEAD

1

2

3

4

5

6

7

0

NPSHR

30

2025

1015

5

9.7

67.6

34.5

1.5

FEET

METE

RS

100 PSI (6.8 Bar)

80 PSI (5.44 Bar)

60 PSI (4.08 Bar)

40 PSI (2.72 Bar)


MODEL S30 Metallic Performance CurvePerformance based on water at ambient temperature.

CAPACITYLiters per minute

BAR

PSI

HEAD

10020(34) 40(68)

60(102)80(136)

100(170)

80

60

40

20

00

1

2

3

4

5

6

7

0 20 40 60 80 100 120 140 160 180 200

9008007006005004003002001000

220 240U.S. Gallons per minute

120(204)

140(238)

100 PSI (6.8 Bar)

80 PSI (5.44 Bar)

60 PSI (4.08 Bar)

20 PSI (1.36 Bar) Air Inlet Pressure

40 PSI (2.72 Bar) 30

2025

1015

5

9.1

67.6

34.5

1.5

NPSHR

METE

RS

FEET

Metallic Containment duty pumps and tranquilizers installed in a chemical processing plant.


STANDARD DUTY BALL - Metallic

Standard Duty Metallic Pumps are ideally suited for intermittent/on-demand, portable moderately abrasive uids and suspended solids. Standard duty metallic pumps are constructed in Aluminum, Cast Iron, Stainless Steel and Alloy C with elastomer TPE (thermal plastic elastomers) and PTFE options in diaphragms and check valves.

S30

Metallic standard duty pumps handling suspended solids in an

industrial waste treatment operation.

S20

S1F

S05

S15


PUMPMODELS

A B C D E

ConnectionStyle

PipeSize


MaxFlow

Per Minute

MaxSolids

Handling




E02 5 13/16 (148) 7 7/16 (189) 4 3/8 (111) 5/8 (16) 5 13/32 (138) 1/4" NPT .25 (6) .003 (.01) 4.4 (16.6) .079 (2) 125 (8.6)

S05 AL 11 1/2 (292) 10 1/4 (260) 7 1/16 (179) 1 5/16 (33) 11 1/2 (292) 1" MNPT .5 (12) .026 (.098) 15 (57) .125 (3) 125 (8.6)

S05 SS 10 3/8 (264) 10 1/4 (260) 7 1/16 (179) 1 5/16 (33) 9 23/32 (247) 1" MNPT .5 (12) .026 (.098) 15 (57) .125 (3) 125 (8.6)

S1F AL / CI 12 23/32 (323) 10 1/4 (260) 10 3/8 (264) 1 3/32 (28) 11 27/32 (301) 1" NPT 1 (25) .11 (.42) 45 (170) .25 (6) 125 (8.6)

S1F SS 12 27/32 (326) 10 1/4 (260) 10 3/8 (264) 1 7/32 (31) 11 31/32 (304) 1" NPT 1 (25) .11 (.42) 45 (170) .25 (6) 125 (8.6)

S15 AL / CI 21 37/64 (548) 16 21/32 (423) 12 23/64 (314) 1 29/32 (49) 20 5/16 (516) 1" NPT 1.5 (40) .41 (1.55) 106 (401) .25 (6) 125 (8.6)

S15 SS 21 21/32 (550) 16 21/32 (423) 12 23/64 (314) 1 31/32 (50) 20 3/8 (518) 1" NPT 1.5 (40) .41 (1.55) 106 (401) .25 (6) 125 (8.6)

S20 AL / CI 26 5/16 (669) 16 7/8 (428) 12 19/32 (320) 1 7/8 (48) 24 5/8 (625) 2" NPT 2 (50) .42 (1.59) 150 (567) .25 (6) 125 (8.6)

S20 SS 26 5/16 (669) 16 7/8 (428) 12 19/32 (320) 2 (51) 24 3/4 (629) 2" NPT 2 (50) .42 (1.59) 150 (567) .25 (6) 125 (8.6)

S30 Al/CI 32 1/16 (814) 19 21/32 (499) 15 3/4 (400) 2 11/32 (60) 29 31/32 (761) 3" NPT 3 (80) .94 (3.56) 235 (889) .38 (9.5) 125 (8.6)

S30 SS 32 9/32 (820) 19 21/32 (499) 15 3/4 (400) 2 9/32 (65) 30 3/16 (767) 3" NPT 3 (80) .94 (3.56) 235 (889) .38 (9.5) 125 (8.6)

Metallic standard duty pumps installed for exterior sump

pumping requirements.

Dimensional Detail



STANDARD DUTY BALL - Metallic

MODEL S1F Metallic Performance CurvePerformance based on water at ambient temperature.


HEAD

5(00)

15(00)20(34)


25(00)

0 5 10 15 20 25 30 35 40 45

160140 180120100806040200

BAR

PSI

100

80

60

40

20

00

1

2

3

4

5

6

7

30

2025

1015

5

9.1

67.6

34.5

1.5

NPSHR

METE

RS

FEET

50

100 PSI (6.8 Bar)

60 PSI (4.08 Bar)


40 PSI (2.72 Bar)

80 PSI (5.44 Bar)

10(17)

30(51)

35(00)

40(68)


4 6 8 10 12 14 1620

CAPACITY


Liters per minute

100

2 (3.5)4 (7)

80

60

40

20

10 20 30 40 50 60

0

0

BAR

PSI

HEAD

1

2

3

4

5

6

7

0

30

2025

1015

5

9.1

67.6

34.5

1.5

NPSHR

FEET

METE

RS

6 (10) 8 (13.5)

10 (17)

12 (20)

16 (27)

14 (24)

18 (30)

20 (33.75)

80 PSI (5.44 Bar)

60 PSI (4.08 Bar)

40 PSI (2.72 Bar)

20 PSI (1.36 Bar)

100 PSI (6.8 Bar)

Air Inlet Pressure

MODEL S15 Metallic Performance CurvePerformance based on water at ambient temperature.10 (17) 20 (34)

70 80 90 100 1106050403020100

CAPACITY


Liters per minute4254003753503253002752502252001751501251007550250

100

90

80

70

60

50

40

30

20

10

0

BAR

PSI

HEAD

1

2

3

4

5

6

7

0

30

20

10

0

9.1

67.6

34.5

1.5

NPSHR

FEET

METE

RS

100 PSI (6.8 Bar)

80 PSI (5.44 Bar)

60 PSI (4.08 Bar)

40 PSI (2.72 Bar)


30 (51)

40 (68)

50 (85)S15 Metallic

Performance Curve

S1F MetallicPerformance Curve

S05 MetallicPerformance Curve



0 20 40 60 80 100 120 140 160

20 (34)

40 (68)

60 (102)

80 (136)

100 (170)

600500400300200100

CAPACITY


Liters per minute

100

90

80

70

60

50

40

30

20

10

0

BAR

PSI

HEAD

1

2

3

4

5

6

7

0

30

2025

1015

5

9.1

67.6

34.5

1.5

NPSHR

METE

RS

FEET

40 PSI (2.72 Bar)


60 PSI (4.08 Bar)

80 PSI (5.44 Bar)

100 PSI (6.8 Bar)



BAR

PSI

HEAD

10020(34) 40(68)

60(102)80(136)

100(170)

80

60

40

20

00

1

2

3

4

5

6

7

0 20 40 60 80 100 120 140 160 180 200

9008007006005004003002001000

220 240U.S. Gallons per minute

120(204)

140(238)

100 PSI (6.8 Bar)

80 PSI (5.44 Bar)

60 PSI (4.08 Bar)


40 PSI (2.72 Bar) 30

2025

1015

5

9.1

67.6

34.5

1.5

NPSHR

METE

RS

FEET



Permanently installed metallic standard duty pumps in an interior chemical industry sumping installation.


STANDARD DUTY BALL - Non-Metallic

Standard Duty Non-Metallic Pumps are ideally suited for highly corrosive uids intermittent/on-demand, portable, low abrasive uids and suspended solids. Standard duty non-metallic pumps are constructed in Polypropylene, Kynar and Conductive Acetal with TPE (thermal plastic elastomers) and PTFE options in diaphragms and check valves.

S30

S20

S1F

S10

S20

S07

S05

Standard duty polypropylene pumps installed for

chemical processing.


PUMPMODELS

A B C D E

ConnectionStyle

PipeSize


MaxFlow

Per Minute

MaxSolids

Handling




PB-A 7 13/16 (198) 7 (178) 5 1/2 (140) 3/4 (19) 7 13/16 (198) " MNPT .25 (6) .01 (.04) 4 (15) .03 (1) 100 (6.9)

S05 11 5/16 (287) 10 1/8 (257) 7 1/16 (179) 1 3/8 (35) 11 5/16 (287) 1" MNPT .5 (15) .026 (.098) 14 (52) .125 (3) 100 (6.9)

S07T* 13 11/32 (339) 11 13/16 (300) 7 1/16 (179) 1 13/16 (46) 13 11/32 (339) 1" MNPT .75 (20) .016 (.059) 13 (48) .38 (9) 100 (6.9)

S07 13 11/32 (339) 11 13/16 (300) 7 1/16 (179) 1 13/16 (46) 13 11/32 (339) 1" MNPT .75 (20) .026 (.098) 23 (87) .15 (4) 100 (6.9)

S10 13 13/16 (351) 11 13/16 (300) 7 9/16 (192) 2 1/2 (64) 11 11/16 (297) 1" 125# ANSI 1 (25) .026 (.098) 23 (87) .15 (4) 100 (6.9)

S1F 21 (533) 17 (433) 11 5/8 (295) 2 1/2 (64) 21 (533) 1" 125# ANSI 1 (25) .17 (.64) 45 (170) .25 (6) 100 (6.9)

S15 28 11/16 (729) 23 7/8 (606) 12 11/16 (322) 3 1/2 (89) 28 11/16 (729) 1" 125# ANSI 1.5 (40) .36 (1.36) 90 (340) .47 (12) 100 (6.9)

S20 32 1/16 (814) 24 5/8 (625) 12 11/16 (322) 3 13/16 (97) 32 1/16 (814) 2" 125# ANSI 2 (50) .36 (1.36) 150 (568) .66 (17) 100 (6.9)

S30 40 5/8 (1032) 33 3/8 (848) 18 1/4 (464) 4 7/8 (124) 40 5/8 (1032) 3" 125# ANSI 3 (80) .9 (3.41) 238 (901) .71 (18) 100 (6.9)

A

D

E

B C

90o - 180o rotation

Distributor fabricated portable ltration cart with standard duty non-metallic pump.

Dimensional Detail

*T= Trihedral All Dimensions +/- 1/8 (3)


STANDARD DUTY BALL - Non-Metallic

PB-A Non-MetallicPerformance Curve

MODEL S07Trihedral Performance Curve100

80

90

70

50

30

10

60

40

20

00 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

HEAD N

PSHR

CAPACITY

METE

RS

FEET

BAR

PSI

7

6

5

4

3

2

1

0


Liters per minute5 10 15 20 25 30 35 40 45 50 550

2 (3.5)

6 (10)

30

2025

1510

5

9.1

67.6

4.53

1.5

4 (7)100 PSI (6.8 Bar)

8 (13.5)

12 (20)

14(24)

10(17)

16(27)18(30.4)

80 PSI (5.44 Bar)

60 PSI (4.08 Bar)

(2.72 Bar)

40 PSI

Air Inlet Pressure

20 PSI (1.36 Bar)

MODEL PB-A Performance CurvePerformance based on water at ambient temperature.


100

90

80

70

60

50

40

30

20

10

0 .5 1.0 2.5 3.0 3.5 4.0 4.51.5 2.0U.S. Gallons per minute

BAR

PSI

HEAD

1

2

3

4

5

6

7

0

0 2 4 6 8 10 12 14 16

100 PSI (6.8 Bar)80 PSI (5.44 Bar)

60 PSI (4.08 Bar)

40 PSI (2.72 Bar)

20 PSI (1.36 Bar) Air Inlet Pressure0


1(1.7)

2(3.4)

3(5.1)

4(6.8)

5(8.5)

6(10.2)

MODEL S07 / S10 Non-Metallic Performance CurvePerformance based on water at ambient temperature.

100

80

90

70

50

30

10

60

40

20

00 2 4 6 8 10 12 14 16 18 20 22 24 26

HEAD NPSHR

CAPACITY

METE

RS

FEET

BAR

PSI

7

6

5

4

3

2

1

0


Liters per minute10 20 30 40 50 60 70 80 90 1000

4 (7)

12 (20)

16 (27)

20 (34)

30

2025

1510

5

9.1

67.6

4.53

1.5

100 PSI (6.8 Bar)

80 PSI (5.44 Bar)

60 PSI (4.08 Bar)

40 PSI (2.72 Bar)


8 (13.5)


3 4 5 6 7 8 9 10 11 12 13 14 15 16210

CAPACITY


Liters per minute

100

90

2 (3.5)

4 (7)

80

70

60

50

40

30

20

10

10 20 30 40 50 60

0

0

BAR

PSI

HEAD

1

2

3

4

5

6

7

0

30

2025

1015

5

9.1

67.6

34.5

1.5

NPSHR

FEET

METE

RS

6 (10)

8 (13.5)

10 (17)

12 (20)

14 (24)

16 (27)

100 PSI (6.8 Bar)

80 PSI (5.44 Bar)

60 PSI (4.08 Bar)


40 PSI (2.72 Bar)

S07T Trihedral Non-MetallicPerformance Curve


S07/S10 Non-MetallicPerformance Curve



0 20 40 60 80 100 120 140 160 180 200 220

85075065055045035025015050

CAPACITY


Liters per minute

100

90

80

70

60

50

40

30

20

10

0

BAR

PSI

HEAD

1

2

3

4

5

6

7

0

30

2025

1015

5

9.1

67.6

34.5

1.5

NPSHR

METE

RS

FEET

20 (34)40 (68)

60 (102)80 (136)

100 (170)

120 (204)

140 (238)

40 PSI (2.72 Bar)

20 PSI (1.36 Bar)

80 PSI (5.44 Bar)

Air Inlet Pressure

100 PSI(6.8 Bar)

60 PSI (4.08 Bar)


0 20 40 60 80 100 120 140 160

10 (17)20 (34)

40 (68)

60 (102)

70 (119)

80 (136)

90 (153)

95 (161.5)

75 (127.5)

600500400300200100

30 (51)

50 (85)

CAPACITY


Liters per minute

100

90

80

70

60

50

40

30

20

10

0

BAR

PSI

HEAD

1

2

3

4

5

6

7

0

30

2025

1015

5

9.1

67.6

34.5

1.5

100 PSI (6.8 Bar)80 PSI (5.44 Bar)60 PSI (4.08 Bar)40 PSI (2.72 Bar)


NPSHR

FEET

METE

RS

MODEL S1F Non-Metallic Performance CurvePerformance based on water at ambient temperature.5 (8.5)

10 (17)

30 (51)

15 (25.5)

25 (42.5)

35 (59.5)

40 (68)

35 40 45 50 55302520151050

CAPACITY


Liters per minute

100

100 110 120 130 140 150 160 170 180 190 200

90

90

80

80

70

70

60

60

50

50

40

40

30

30

20

20

10

10

0

0

BAR

PSI

HEAD

1

2

3

4

5

6

7

0

30

2025

1015

5

9.7

67.6

34.5

1.5

NPSHR

FEET

METE

RS

100 PSI (6.8 Bar)

60 PSI (4.08 Bar)

80 PSI (5.44 Bar)

40 PSI (2.72 Bar)

Air Inlet Pressure

20 PSI (1.36 Bar)

20 (34)

45 (76.5)

S1F Non-MetallicPerformance Curve





10 (17)

55(93)

45(76)

65 (110)

40 (68)

30 (51)

20 (34)

60 (102)

50 (85)

55 (93)

58 (99)

69 (117)

70 80 906050403020100

CAPACITY


Liters per minute340 360 380320300280260240220200180160140120100806040200

100

90

80

70

60

50

40

30

20

10

0

BAR

PSI

HEAD

1

2

3

4

5

6

7

0

NPSHR

30

2025

1015

5

9.7

67.6

34.5

1.5

FEET

METE

RS

100 PSI (6.8 Bar)

80 PSI (5.44 Bar)

60 PSI (4.08 Bar)

40 PSI (2.72 Bar)



E

D

A

B C

HIGH PRESSURE DUTY

PUMPMODELS

A B C D E

ConnectionStyle

PipeSize


MaxFlow

Per Minute

MaxSolids

Handling




EH2-M 25 (635) 25 13/16 (656) 11 3/4 (298) 2 3/16 (56) 25 (635) 2" NPT 2 (50) .30 (1.1) 62 (235) .25 (6) 250 (17.2)

SH2-M 18 9/16 (471) 26 7/8 (683) 11 3/8 (289) 11 15/32 (291) 5 11/32 (136) 2" NPT 2 (50) .30 (1.1) 62 (235) 2 (50) 250 (17.2)

Air-powered, single diaphragm high pressure metallic pumps deliver discharge pressure twice the inlet pressure, up to 250 PSI (17 BAR). Designed for lter press feed and applications requiring higher discharge pressures. Available in Aluminum, Cast Iron and Stainless Steel with various elastomer options.

MODEL SH2-MPerformance based on water at ambient temperature.

200

220

24010(17) 20(34)

40(68)

50(85)

40 PSI

180

160

140

120

100

80

60

40

20

00 10 20 30 40 50 60 70

Liters per minute


CAPACITY

0 100755025 150125 200175 225 250

BAR

HEAD

0

2

4

8

6

10

12

14

18

16

PSI


30(51)


60 PSI

80 PSI

100 PSI

120 PSI

Ave. Displacement per stroke0.3 gallon (1.1 liter)EH2-M & SH2-M

Performance Curve

SH2-M

EH2-M



FILTER PRESS SYSTEMS

Built-to-order, multi-pump systems combine a high volume ll pump with a high pressure feed pump. Frequently used for lter press feed applications, the systems produce operating pressures to 250 PSI (17 BAR). This results in shortened press cycles, drier cake and less costly disposal.

Custom built heavy duty wastewater, lter press pumping system.

BASE SYSTEMS

040.010.000. consists of:(1) S20W1INCANS100.(1) EH2-M, TN-4-I Filter/Regulator (1) 020.052.000.Filter/Regulator (1) 020.051.000.

Includes base & piping with 2" ange suction & discharge connections.

040.011.000. consists of:(1) S30W1INCANS100.(1) EH2-M, TN-4-I Filter/Regulator (1) 020.052.000.Filter/Regulator (1) 020.051.000.


040.003.000. consists of:(1) SA2-A, DA-5-II(1) SH2-M, DN-7-I Filter/Regulator (1) 020.052.000.Filter/Regulator (1) 020.051.000.


040.004.000. consists of:(1) SA3-M, DA-2-II(1) SH2-M, DN-7-IFilter/Regulator (1) 020.052.000.Filter/Regulator (1) 020.051.000.

Includes base & piping with 3" angesuction & discharge connections.

CONSULT FACTORY FOR MIX AND MATCH OF PUMPS FOR OTHER SYSTEMS.

Plate and frame lter press base system.


EA

D

B C

180o rotation

SPECIAL DUTY - UL Pump

PUMPMODELS

A B C D E

ConnectionStyle

PipeSize


MaxFlow

Per Minute

MaxSolids

Handling




U1F 12 23/32 (323) 10 1/4 (260) 10 3/8 (264) 1 3/32 (28) 11 27/32 (301) 1" NPT 1 (25) .11 (.42) 45 (170) .25 (6) 125 (8.6)

UL (Underwriters Laboratory) Pumps are designed to meet UL79 standards for diaphragm pumps handling ammable liquids. All Aluminum construction with approved Buna or Virgin PTFE UL elastomers. Fully groundable to prevent static discharge.

U1F Performance Curve

U1F


Underwriters Laboratory


MODELW09-2 /W09-3PERFORMANCE CURVE

40 PSI

60 PSI

80 PSI

100 PSI

10

0

20

30

40

50

60

70

80

90

100

200 40 60 80 100 120 140 160

10(17) 20(34)30(51)

40(68)50(85)

60(101.9)70(118.9)

80(135.9)90(152.9)

100(169.9)

150(254.9)20 PSI Air Inlet Pressure

Liters per minute


CAPACITY

0 200 300 400 500 600


BAR

100

HEAD

0

1

2

3

4

5

6

7

PSI

125(212.4)

AD

E

CB

Non-Clog Wastewater Pumps

PUMPMODELS

A B C D E

ConnectionStyle

PipeSize


MaxFlow

Per Minute

MaxSolids

Handling




W09-2 23 3/4 (608) 28 1/4 (724) 19 3/4 (506) 20 3/4 (531) 5 5/8 (144) 2" 125# ANSI 2 (50) .43 (1.60) 140 (530) 2 (50) 125 (8.6)

W09-3 24 1/2 (627) 28 1/4 (724) 19 3/4 (506) 20 3/4 (531) 5 5/8 (144) 3" 125# ANSI 3 (80) .43 (1.60) 140 (530) 2 (50) 125 (8.6)

W15-3 31 1/2 (800) 44 1/2 (1130) 21 1/2 (546) 27 3/4 (705) 6 (152) 3" 125# ANSI 3 (80) 1.23 (4.66) 260 (988) 3 (76) 125 (8.6)

W15-4 32 1/4 (819) 44 1/2 (1130) 21 1/2 (546) 27 3/4 (705) 6 (152) 4" 125# ANSI 4 (100) 1.23 (4.66) 260 (988) 3 (76) 125 (8.6)

Non-Clog Wastewater Pumps are tted with swing check valves and easy access clean-outs. The pumps are designed specically for slurry and solids-laden materials. Flap valves allow passage of suspended, pipe-sized solids and stringy material. Constructed of cast iron with a durable epoxy coating inside and out.

W09 Performance Curve W15 Performance Curve

W15

W09


MODELW15-3 /W15-4PERFORMANCE CURVE


10

00

20

30

40

50

60

70

80

90

100

20 40 60 80 100 120 140 160 180 200 220 240 260

20(34)

60 PSI

40 PSI

40(68)60(101.9)

80(135.9)

100(169.9)

120(203.9)

140(237.9)

160(271.8)

180(305.8)


100 PSI

80 PSI


0 100 200 300 400 500 600 700 800 900 1000


AR

HEAD

0

1

2

3

4

5

6

7

200(339.8)


SPECIAL DUTY - USDA (United States Department of Agriculture) Pumps

SSB2-A

SSB1-A

SET1-A

SSA2-A

USDA certied ap check valve pumps transfering tomato paste at a major

university processing facility.

USDA certied ball check valve pump in a clean-in-place, sanitary piping installation.


Electronic Leak Detector - This leak detector works on the principle of conductance, sensing liquid or condensation entering the air side of the pump. It is installed through a boss on the inner chambers. A probe senses pooled conductive liquid, producing a low current (1.2 volt DC), which signals a control unit. Indicator lights signal not only contamination, but also which side is tainted. The control unit can be easily wired to an audible alarm

or pump shutdown mechanism if needed. Modular, water-tight construction. Sensitivity range is adjustable from 500 ohm (2000 micro mho) to 100,000 ohm (10 micro mho). Available for 115V (032.017.000) and 220V (032.018.000) power supply. This unit must be purchased separately.

Materials of Construction - Wetted parts of these Meat/Poultry* pumps are electropolished 316 and 302/304 Stainless Steel. Non-wetted parts are electroless nickel-plated aluminum and polypropylene. All are tted with food grade, white nitrile elastomers. The Dairy* pumps have mechanically-polished 316 Stainless Steel wetted parts, and must be tted with the Warren Rupp Electronic Leak Detector to maintain Dairy standards.

*Designed to meet USDA Standards.

SSA2-A Designed to meet USDA Standards.2" (63.5mm) Flap Valve, 0 to 150 GPM (570 liters)Handles solids to 11/16" (27.4mm), Top or Bottom Discharge

This performance based on water, approximate .63 gal. (2.39 ltrs.) displacement per pump stroke.

SET1-A Sanitary Pump designed to meet USDA Standards.1" (25.4mm) Ball Valve, 0 to 54 GPM (204 liters)Handles solids to " (6mm), Top Discharge

This performance based on water, approximate .09 gal. (.34 liters) displacement per pump stroke.

SET2-A Sanitary Pump designed to meet USDA Standards.2" (50.8mm) Ball Valve, 0 to 123 GPM (465 liters)Handles solids to " (6mm), Top Discharge


SSB2-A Designed to meet USDA Standards.2" (50.8mm) Ball Valve, 0 to 125 GPM (473 liters)Handles solids to " (6mm), Top Discharge


DSB1-A Designed to meet USDA (Dairy Division) Standards.Must be tted with Electronic Leak Detector to maintain Dairy Approval. Leak Detector purchased separately.

SSB1-A Designed to meet USDA Standards.1" (38mm) Ball Valve, 0 to 54 GPM (204 liters)Handles solids to " (6mm), Top Discharge

This performance based on water, approximate .09 gal. (.34 liters) displacement per pump stroke.

Note: The Electronic Leak Detector must be purchased separately.


T30

T1FTSA2-AT15

T20

PUMPMODELS

A B C D E ConnectionStyle

SanitaryClamp

PipeSize


MaxFlow

Per Minute

MaxSolids

Handling




TSA2-A 20 13/16 (529) 21 1/4 (539) 13 (330) 2 9/16 (55) 17 9/16 (447) 2" Clamp 2 (50) .43 (1.60) 140 (530) 2 (50) 125 (8.6)

T1F 12 31/32 (326) 10 1/4 (260) 10 3/8 (264) 1 7/32 (31) 11 31/32 (304) 1" Clamp 1 (25) .11 (.42) 45 (170) .25 (6) 125 (8.6)

T15 21 13/16 (554) 16 21/32 (423) 12 2

Sandpiper General Brochure

Documents