381381 Call Free: 1.800.848.1633 • Fax Free: 1.800.447.2923 381 Just Activated More than 3 days/ 72 hours After 3 days/ 72 hours Less than 3 days/ 72 hours Minimize the risk of hospital acquired infections. Before Activation A 18238 Timestrip ® IV Line Alert $80.00 $76.00 $72.00 • 100 per box. A A Timestrip ® is a Registered Trademark of Timestrip Plc
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
A 18238 Timestrip® IV Line Alert $80.00 $76.00 $72.00Timestrip® is a Registered Trademark of Timestrip Plc
A
A
Timestrip® IV Line Alert• Reduce cannula-related infection
risk! Easy-to-use timing device assists routine inspection and replacement of IV lines and/or devices to minimize the risk of hospital-acquired infections.
• With 60% of blood infections caused by IV lines, it is crucial that hospitals have procedures in place to change them regularly. Timestrip IV Line Alert guards against inadvertent retention of cannula in excess of 72 hours and prompts staff to take appropriate action in line with hospital Infection Protection procedures.
• Economical, single-use timing strips assist routine inspection and replacement of IV lines and/or devices to minimize the risk of hospital-acquired infections.
• Colored liquid moves across the clear viewing window to the “3 DAYS” mark to indicate how long the cannula has been in use.
• Provides a signifi cant costs savings by cutting infection rates.
• Improves patient satisfaction and confi dence in service.
• To ensure accuracy, Timestrip should be placed close to the patient.
• 100 per box.
Instructions:• After inserting the cannula, fi rmly squeeze the bubble
between fi nger and thumb until the bubble is fully depressed. TO ENSURE ALL THE LIQUID HAS BEEN EMPTIED FROM THE BUBBLE, IT MAY BE NECESSARY TO SQUEEZE IT MORE THAN ONCE.
• After a few seconds, a thin red line will appear in the window showing that the Timestrip has been activated.
• The colored liquid inside the Timestrip will gradually move across the viewing window giving a clear indication of whether the patient records need to be checked..
• This product is calibrated for use at an average temperature of 82°F/28°C and is intended for use on a patient wristband or dressing.
•When used in accordance with these instructions, the Timestrip is accurate to ±10%.
IV Accessories & Injectables 1.indd 383 10/17/11 11:51 AM
Portable IV Pole • Portable, lightweight and collapsible for patients receiving
short duration/low volume gravity fed infusions (up to 500cc) at alternate sites.
• Tripod design allows pole to be used on any fl oor or table top.
B
Item No. Description Price EachB 1575-01 Large Portable IV Pole $30.10
Large IV Pole (#1575-01)Extended Height: 74"
Collapsible Height: 28"Weight: 2 lb
B
Arm & Leg Stand• Provides stability and comfort for a patient’s arm or leg during
procedures requiring limb support.• Five-leg base with 2" casters (two lockable).• Telescoping top accommodates different working heights. • Pole and leg base are made of chrome-plated steel. Adjustable
pad is made of polyurethane foam.• Lowest Set Up Height from fl oor 27"• Maximum Set Up Height from fl oor 351⁄2"
height adjuster
adjuster knob for tilting the
pad
Item No. Description Price EachA 10656 Arm & Leg Stand $125.00
IV Accessories & Injectables 1.indd 384 10/17/11 2:59 PM
Table-Top IV Pole• Portable and lightweight for gravity or pump-
administered infusions. • Stainless steel and aluminum.• Height adjustment:
201⁄2" - 321⁄2"• Base Dimensions:
85⁄16"W x 81⁄4"D
See pages 389-391 for IV Locking
boxes.
Item No. Description Price EachB 14119 Table-Top IV Pole $110.00
Infusion Stand• Stainless steel stand and holder for infusion/syringe pumps.
Five legs with swivel casters (two lockable) provide easy movement and stability.
• Spring-loaded height adjuster. Drip glass catches IV fl uids or holds pens, swabs, etc.
• Chrome IV Holder holds four bags or bottles. • Diameter of Pole Base with casters: 259⁄16"• Lowest Set Up Height from fl oor: 561⁄2"• Maximum Set Up Height from fl oor: 83"
Item No. Description Price EachA 11497 Infusion Stand $205.00
B
• Stainless steel stand and holder for infusion/syringe pumps. Five legs with swivel casters (two lockable) provide easy
• Spring-loaded height adjuster. Drip glass catches IV fl uids or
IV Accessories & Injectables 1.indd 385 10/17/11 11:51 AM
A B
IV Poles & Accessories • Lightweight for transport, yet strong for gravity infusions. • Five legs with black plastic swivel casters (two lockable) provide easy
movement and stability.• Drip glass catches IV fl uids or holds pens, swabs, needles and more. • Diameter of Pole Base with Casters: 261⁄2"
IV Poles with Screw Height Adjuster (#10650 & 10651)• Lockable screw height adjuster. • Plastic Black IV Holder holds four bags or bottles. • #10650 pole and leg base are made of chrome-plated steel.• #10651 pole and leg base are made of stainless steel. Stainless steel is
stronger and lighter.• Lowest Set Up Height from Floor: 49"• Maximum Set Up Height from Floor: 83"
IV Poles with Spring-Loaded Adjuster (#10652, 10653 & 10659)• Spring-loaded height adjuster. • #10652 pole and leg base are made of chrome-plated steel.• #10653 & 10659 pole and leg base are made of stainless steel. Stainless
steel is stronger and lighter.• Includes an IV Holder that will hold four
bags or bottles. #10653 - Chrome; #10659 - Blue
• Lowest Set Up Height from fl oor 561⁄2"• Maximum Set Up Height from fl oor 83"
Item No. Description Price EachA 10650 Chrome IV Pole with Screw Height Adjuster $95.00
10651 Stainless Steel IV Pole with Screw Height Adjuster 107.0010652 Chrome IV Pole with Spring-Loaded Adjuster 125.00
B 10653 Stainless Steel IV Pole with Spring-Loaded Adjuster 136.30C 10659 Stainless Steel IV Pole with Spring-Loaded Adjuster 136.30
Blue IV Holder
Lockable Roller Brakes are electronically conductive.
IV Accessories & Injectables 1.indd 387 10/17/11 11:52 AM
Cage removes to change bulb
A
See pages 283-295 for temperature monitoring devices.
Medication Warming Cabinets• Warms medications such as Mannitol
and provides storage in a temperature-maintained environment to prevent drugs from crystallizing.
• The heat generated from a 40-watt bulb (not included) will maintain the temperature range of 95º to 122ºF (35º to 50Cº). Monitoring is recommended, as temperatures will vary.
• Durable high-quality melamine. Available with or without viewing window, with or without key lock.
• Powered by 110V. All components are UL approved.
• An 8' power cord and protective light bulb cage are included.
• Outside Dimensions: 18"W x 12"H x 123⁄4"D
• Inside Dimensions: 161⁄2"W x 101⁄2"H x 113⁄16"D
B C
Cabinet color options. Specify color when ordering.
IV Accessories & Injectables 1.indd 388 10/17/11 11:52 AM
secure with seals
peg
ECONOMICAL enough to be disposed
of with bags.
Tamper-Resistant IV Bag Protector • Clear plastic protector helps control
tampering with infusions of morphine and other controlled substances.
• IV Bags are placed inside the clamshell and are hung by the peg molded into the protector. The protector is then closed and sealed with security seals.
• Designed for 500 and 1,000mL bags.• Outside Dimensions:
A 11921 Tamper-Resistant $3.10 $3.01 $2.95 $2.79IV Bag Protector
A
See pages 241-273 for security seals.
IV Locking Boxes• Clear plastic box secures
large volume infusions of morphine and other controlled substance medications.
• Three locking options: Keyless digital lock uses a four-digit code. Key lock includes two keys, key lanyard and a hook. Locks are keyed differently. Combination lock allows keyless access.
• Slot in the bottom of the box allows for pass-through of IV set.
• Accommodate bags up to 500mL with bag ports fi tting inside box. Most 1,000mL bags can also be used, with bag ports located outside of box.
• Outside Box Dimensions: 51⁄8"W x 103⁄4"H x 31⁄2"D
Item No. Description Price EachB 17842 IV Locking Box, Keyless Entry Digital Lock $176.00C 1559-01 IV Locking Box, Key Lock 88.00D 1567 IV Locking Box, Combination Lock 105.60
IV Accessories & Injectables 1.indd 390 10/17/11 3:00 PM
Lock-To-Pole IV Lock Boxes• Dual clamps on the inside of the box
snap onto the pole. When the door is closed and secured, the box is locked onto the pole and cannot be removed without having access to the inside of the box.
• Made of Clear PETG material, which provides durability for everyday use.
• Choose standard key option or keyless digital lock.
• Models with key locks are keyed alike. Contact our Resource Department for different keying options.
• Models with Keyless Entry Digital Locks use a four-digit code and offer immediate access control. It features three levels of user access (no audit trail).
• Accommodates IV bag sizes up to 1,000mL. For users of 1,000mL IV bags, ports will be outside the box.
• Locks to pole sizes up to 7⁄8" Dia. • Dimensions: 71⁄2"W x 101⁄2"H x 41⁄2"D
50mL 500mL 1,000mL250mL100mL
Item No. Description Price EachA 17938 Lock-To-Pole IV Lock Box with Key Lock $99.00B 17958 Lock-To-Pole IV Lock Box with Keyless Entry Digital Lock 176.00
IV Accessories & Injectables 1.indd 391 10/17/11 11:53 AM
• Cable is 2 feet in length. (Custom Cable lengths can be ordered for a small charge and shipped within fi ve working days.)
• Padlocks can be custom engraved with a number, name or other information. Pharmacy personnel can track each custom engraved padlock and its combination with a spreadsheet. They can then send out a unique combination when new meds are delivered. Only authorized personnel who have been given the combination by the pharmacy staff via phone, email, voicemail or text can remove the pole. Call Customer Service for more information on the lock custom engraving.
IV Pole Securing System• Stainless steel clamp, with combination
padlock and cable, attaches to the IV pole and can be tethered to a fi xed location such as the wall, bed or cabinet, where the second combination padlock locks the cable to the eyelet on the adhesive-backed pad. Results are a secured IV pole.
• Before affi xing the adhesive-backed pad, be sure the surface is clean and dry. The adhesive on the pad is very aggressive and makes it extremely diffi cult to remove. Consider the placement to be a permanent location.
• Two three-digit chrome combination padlocks are included. It is very easy to change the combination for control and security purposes. Additional combination padlocks are also available.
A 17891 Thermal Transfer Labels, Orange $20.70 $19.76 $18.63B 17892 Thermal Transfer Labels, Red 20.70 19.76 18.63C 17893 Thermal Transfer Labels, Yellow 20.70 19.76 18.63
Wasp® is a registered trademark of Wasp Barcode Technologies.Zebra® and OpenACCESS™ are registered trademarks of ZIH Corp.
A 6026 Syringe Flag Label, Laser 2,000/box 2 across; 10 down $32.60 $30.97 $29.34B 6032 Syringe Flag Label, Thermal Transfer 2,000/roll 1 across 72.50 68.88 65.25
The 6032 thermal transfer roll allows printing of one label at a time.
B
Predefined Templates in Wasp® Barcode Software. See pages 420-423.
IV Accessories & Injectables 1.indd 395 10/17/11 11:54 AM
Protects plungers from accidental activation during transport or
storage.
Tamper-Evident Syringe Case • One-piece construction includes
two integral locks and 10 security seals.
• Once the two security seals are inserted into the locks, they cannot be removed without breaking, which provides evidence of tampering.
• Outside Dimensions: 85⁄8"L x 21⁄8"W x 11⁄4"H
• Inside Dimensions: 81⁄8"L x 13⁄4"W x 1"H
PriceItem No. Description Qty. 1 - 4 5 - 9 10 +
B 7226-01 Tamper-Evident Syringe 1 $2.90 $2.76 $2.61Case and 10 seals
7227A-15 Security Seals for Tamper 500 56.30 53.49 50.67Evident Syringe Case
Syringe Case• Protect syringes from dust or contamination.• Designed for premeasured medications.• Available in Blue and Red. Specify color when ordering.• Outside Dimensions: 71⁄4"L x 71⁄4"W x 5⁄8"H• Inside Compartment Dimensions: 71⁄8"L x 1⁄8"W x 1⁄2"H
Needle-Free Access Devices• Latex-free and non-DEHP for safe and simple access to multi-dose vials
and IV bags.• Swab the connector and attach any standard luer fi tting. • Access port self seals to prevent contamination.Bag Spike with SmartSite® 11962• Permits needle-free withdrawals from container without caps or clamps.Bag Spike with Check Valve and SmartSite® 11963• Allows for withdrawals, but prevents additions to the solution container.SmartSite® Needleless Valve 11964• Provides needle-free bag access for multiple fl uid additions and
withdrawals.Sterile Vial Adapters• For simple reconstitution and withdrawal procedures.• Snap on the spiked cuff of the adapter to a vial, connect a syringe with
diluent to luer lock connector and withdraw or add desired fl uid volume.• Available in 14mm and 20mm sizes.
Level CSP KitWhirl-pak® is a registered trademark of Wheatherby/Nasco, Inc.
CSP Media-Fill Challenge Kits• Kits in three risk level sizes include all
the products necessary to comply with USP <797> requirements for media-fi ll challenge testing.
• Tests document correct personal technique and effective environmental control for the preparation of compounded sterile products (CSPs).
• Kit performs one complete test for one pharmacist or technician.
• Test risk levels are based on the potential for introducing sources of contamination to the preparations from microbial, chemical or physical contamination during compounding activities.
• Low: Kit includes (1) Tryptic Soy Broth (TSB), 100mL Serum Vial, 100mL; (3) Sterile 20mL Serum Vials (empty); (1) Whirl-Pak® Bag and (1) results log sheet.
• Medium: Kit includes (1) Tryptic Soy Broth (TSB), 1000mL Dual Port Bag, 700mL; (6) Sterile 100mL Dual Port Bags (empty); (6) Sterile 20mL Serum Vials (empty); (1) Whirl-Pak® Bag and (1) results log sheet.
• High: Kit includes (1) Tryptic Soy Broth (TSB) Powder, 125mL Polycarbonate Bottle, 3 gm Fill; (9) Sterile 20mL Serum Vials (empty); (1) Whirl-Pak® Bag and (1) results log sheet.
IV Accessories & Injectables 1.indd 401 10/17/11 11:55 AM
A
B
CD
Sterile Empty VialsA smart choice for USP <797> compliance!• Sterile vials are dry heat sterilized and individually inspected. • Vials have 20mm Silver caps. • Five sizes (5mL, 10mL, 30mL, 50mL and 100mL) provide variety
to meet a range of medication preparation demands.
IV Accessories & Injectables 1.indd 402 10/17/11 11:55 AM
A B
C
D
Plastic IV hangers are included with the 100mL vials. (Not available
separately.)
E
Color chart for #7866, 7867, 7887 & 7885*
* #7885 not available in Orange and Yellow.
Blue
Green
Orange
Red
Yellow
F
H
Contact our Resource Department for
other Vial Seals.
Create a color-coding system with the different colors.
I
Empty Sterile Glass Vials• USP Type I Glass vials with latex-free stoppers are
aseptically sterilized. One drop of pyrogen-free water for injection has been added to the vials to render them sterile upon autoclaving, except for #8411 which is sterilized via terminal steam sterilization, aseptically assembled.
• All vials, except for #8411, are marked by the manufacturer with size, lot number and expiration date. #8411 is marked with manufacturer size and lot number only.
• 20 plastic IV hangers are included with each 100mL package of vials and allows them to be hung under a laminar � ow hood.
G
Vial Seals• Flexible foil seals offer a reliable
moisture, particulate and bacterial barrier. Needle punctures are highly visible.
• Surface remains sterile until removed from the paper backing.
• Accommodates 13, 20, 28 and 36mm tops. The 36mm seal is for Lilly’s Faspak® bottles.
IV Accessories & Injectables 1.indd 403 10/17/11 11:55 AM
Tamper-Evident
CBA
Item No. Description Price per PackageA 18297 Vial Seals, 13mm, Red $139.00B 18298 VIal Seals, 20mm, Chrome 139.00C 18299 Vial Seals, 28mm, Blue 139.00
Seals are a Steri-Tamp™ product. Steri-Tamp™ is a trademark of Allied Pharmacy Products, a division of Custom Tape Co.
Vial Seals• Sterile seals protect against contamination and prevent
accidental double dosing. • Removal leaves a printed “OPENED” warning and cannot
be reapplied. • The foil outer layer provides evidence of a needle puncture. • Packaged in a clamshell container with hanging tab for
dispensing. • Notches allow seals to lay fl at to prevent bacteria from
channeling to the port.• 1,000 seals per roll.
Item No. Description Price per PackageD 18502 Belly Button Bag Port Seals $139.00
Belly Button Bag Port Seals • Safe, sterile seal covers the belly
button port of an IV bag to protect it from contamination and accidental double dosing.
• The foil outer layer provides visible evidence of a needle puncture.
• Removal leaves a printed “OPENED” warning and cannot be reapplied.
• USP 797 friendly! Seals feature a lint-free plastic liner and are packaged in a plastic clamshell dispensing container that will not shed particulate.
• 13mm fi ts a variety of bags with a belly button port
IV Accessories & Injectables 1.indd 405 10/24/11 9:31 AM
Place the cap over the additive port and
snap it closed.
Tamper-Resistant Add-Port Cap• Used to deter access to the additive port on Baxa® Exacta-Med TPN
Containers (PVC and EVA), Abbott® TPN Containers and Dual Chamber TPN Containers.
• After additives have been injected, place the Red plastic hinged additive port cap over the additive port and snap closed.
• Once the cap is attached, it is difficult and takes time to remove. • 25 per package.
Price per 25Item No. Description 1 - 4 5 - 9 10 +
A 7979-03 Tamper-Resistant Add-Port Cap $17.60 $16.72 $15.84Baxa® Exacta-Med is a trademark of Baxa Corporation.Abbott® is a trademark of Abbott Laboratories, Inc.
Price per 25Item No. Description 1 - 4 5 - 9 10 +
B 4073 Tamper-Resistant Add-Port Cap $26.70 $25.37 $24.03for Baxter Viaflex Bag
Baxter® and Via� ex® are registered trademarks of Baxter Healthcare Corporation.
Tamper-Resistant Add-Port Cap for Baxter® Via� ex® Bags• Snap the non-sterile Blue hinged cap over the additive
port on Baxter Via� ex Bags to indicate that medication has been added. Helps eliminate and indicate tampering by restricting the port access.
• Unlike adhesive and foil seals, the thick plastic cannot be penetrated with a needle.
• Made of polypropylene plastic.• 25 per package.
A
B
Item No. Description Price per PackageC 18649 VisCap Port Covers $80.00
VisIV® is a registered trademark of Hospira Inc.VisCap™ is a trademark of Hospira Inc.
1
2
3
4
VisCap™ Port Cover • For use with VisIV® Containers only. Latex-free IV port
covers are easy to apply but takes more effort to remove.• Clearly indicates medication has been added and helps
A 17360 Tamper-Evident Tip Cap for Luer Lock Syringes $41.20 $39.14 $37.08B 17361R Tamper-Evident Tip Cap for Luer Lock Syringes 52.30 49.69 47.07
Sterile Tamper-Evident Tip Cap for Luer Lock Syringes• Helps maintain the integrity of a
luer lock syringe. Restricts access to the tip and leaves behind a plastic sleeve when the cap is removed to indicate use or tampering.
• Sterile packaging tray holds 10 caps and allows syringes to be capped directly from the tray reducing the risk of contamination. Ideal for use under a hood for preparation of multiple IV syringes.
• #17360 can be used with the majority of luer lock syringes 2.5cc and larger. Available in Blue, Red and White for easy identifi cation and color-coding options
• #17361R can be used with the majority of luer lock syringes 1cc and larger. Available in Red only. Individually packaged in a box of 10.
• 100 per package.
Syringes can be capped directly from tray which reduces contamination.
Syringes can be capped directly from tray which reduces contamination.
IV Accessories & Injectables 2.indd 410 10/17/11 11:59 AM
IV Solution Cart • Small footprint is benefi cial to transport bulk supplies and IVs.• Top shelf is inverted with a 2" ledge.• Developed for use with three #1715 Divider Boxes (sold separately).
Optional dividers available. Call your Customer Service Representative for more information about divider boxes and dividers.
• Four 5" swivel casters.• Top shelf, bottom shelf and posts are chrome plated.• Four donut bumpers help prevent scratches and dents to walls,
woodwork, furniture and equipment.• Assembles with minimal effort.• Includes:
4 - 48" Posts 1 - 21" x 24" Inverted Shelf 1 - 21" x 24" Flat Shelf 6 - Single Tote Slides 4 - 5" Dia. Swivel Poly Casters 4 - 31⁄2" Donut Bumpers• Cart Dimensions: 21"L x 24"W x 48"H
IV Room Set-Up Table• Carbon steel IV work station and supply area with a
bright zinc finish. • Solid stainless steel table top; wire shelf can be organized
with the six dividers included. • Three-sided base frame adds stability. Foot plates have
three predrilled holes to bolt the table to the floor.• Posts have shelf mounting notches in 1" increments up to
41”. • Top and shelf have a weight capacity of approximately
IV Accessories & Injectables 2.indd 412 10/17/11 12:00 PM
H
Carry Caddies ContinuedH. #10318 Phlebotomy Supply Carrier has four large compartments with removable dividers. Removable tube rack has (90) 13mm compartments.
I. #5210 IV Therapy Tray Set includes � ve Large Bin Cups and four Small Bin Cups.
J. #1949 Small Bin/Tray Cup
K. #1950 Large Bin/Tray Cup
L. #17465 Phlebotomy Tray with two #17466 Inserts & 16mm Tube Rack.
M. #17466 Phlebotomy Tray Inserts.
J
K
I
Base Outside Dimensions Height Price EachItem No. Description Color W x H x D including handle 1 - 4 5 - 9 10 +
A 5227 Carry Caddy with drawer dark gray 143⁄4 x 6 x 93⁄16 613⁄16 $12.40 $11.78 $11.16B 5228 Carry Caddy black 15 x 47⁄8 x 107⁄8 75⁄16 14.00 13.30 12.60C 9020 Compartment Caddy white/red 161⁄2 x 35⁄16 x 113⁄4 91⁄2 155.00 147.25 139.50D 5231 Tote Carry Caddy blue 181⁄4 x 51⁄2 x 133⁄4 9 9.00 8.55 8.10E 1828 Carry Caddy with drawer orange 161⁄2 x 65⁄16 x 101⁄4 67⁄8 15.50 14.73 13.95F 5212 Carry Caddy with foam inserts white 1413⁄16 x 47⁄16 x 133⁄4 101⁄4 85.00 80.75 76.50G 5226 Carry Caddy white 143⁄4 x 41⁄2 x 97⁄16 61⁄16 29.00 27.55 26.10H 10318 Phlebotomy Supply Carrier white 161⁄2 x 35⁄16 x 113⁄4 91⁄2 187.00 177.65 168.30I 5210 IV Therapy Tray Set white 1413⁄16 x 47⁄16 x 133⁄4 101⁄4 90.00 85.50 81.00J 1949 Small Bin/Tray Cup white 31⁄4 x 3 x 2 0.55 0.52 0.50K 1950 Large Bin/Tray Cup white 5 x 3 x 23⁄4 0.75 0.71 0.68L 17465 Phlebotomy Tray with 2 Inserts blue 167⁄8 x 57⁄8 x 91⁄4 111⁄4 74.00 70.30 66.60
and 16mm Tube RackM 17466 Phlebotomy Tray Inserts (pack of 4) white 40.00 38.00 36.00
IV Accessories & Injectables 2.indd 414 10/17/11 3:09 PM
E
Connectors• Sterile Luer Lock to
Luer Slip Connector: For filling luer syringes from repeating syringes or pump tube sets.
• Sterile Luer Lock to Luer Lock Connector: Used for the same applications as Luer Lock to Luer Slip but provides secure locking connections on both ends.
• Sterile Luer Lock to Luer Lock Connector with Cap: Same as #7893-50 with addition of a luer lock cap.
• 10 per package.
Price EachItem No. Description 1 - 4 5 - 9 10 +
E 7371 Ampule Opener $6.20 $5.89 $5.58CLIC-OPEN® is a registered trademark of Sepha Pharmaceuticals, Ltd., U.K.
Other connectors are
available through our
RESOURCE DEPARTMENT
Item No. Description Price per PackageA 7891-50 Luer Lock to Luer Slip, sterile blue $12.00B 7893-50 Luer Lock to Luer Lock, 14.00
sterile red/orangeC 7894-50 Luer Lock to Luer Lock, 17.00
with cap, sterile red/orange
AB
C
D
Disposable Ampule Breaker• Reduces the chances of fi nger cuts and
cross contamination.• Glass ampules can be safely opened by
snapping the top of the ampule breaker to the side, thus breaking the top of the ampule off at the neck of the bottle.
IV Accessories & Injectables 2.indd 415 10/17/11 12:01 PM
Dimensions Price per 100Item No. Description W x H 1 - 4 5 - 9 10 +
A 17530 Not for Lock Flush Bag 4 x 6 $11.00 $10.45 $9.90B 17531 Not for Lock Flush Bag 6 x 8 12.00 11.40 10.80C 17532 Not for Lock Flush Bag 8 x 11 13.00 12.35 11.70D 17533 Not for Lock Flush Bag 3 x 12 12.00 11.40 10.80
A
B
C
D
E
Not for Lock Flush Bags • Preprinted message: “NOT FOR LOCK
FLUSH” in Red letters inside Red border.
• 2-mil thick bags draw attention to contents and aid in error prevention.
Opacity ChartCan also use on empty IV bags to cover patient information labels.
Price per 100Item No. Description W x H 1 - 4 5 - 9 10 +
A 7589 IV Cover, light, slit at sealed end 8 x 14 $14.00 $13.30 $12.60B 7590L IV Cover, light 8 x 14 14.00 13.30 12.60C 7587 IV Cover, light, slit at sealed end 6 x 10 14.00 13.30 12.60
7584 IV Cover, green, slit at sealed end 6 x 10 14.00 13.30 12.607586 IV Cover, light, slit at sealed end 5 x 71⁄2 9.10 8.65 8.197579 IV Cover, green, slit at sealed end 5 x 71⁄2 9.10 8.65 8.197587D IV Cover, dark 6 x 10 14.00 13.30 12.607589D IV Cover, dark, slit at sealed end 8 x 14 14.00 13.30 12.60
D 7588 Reclosable Bag, 3-mil, medium, 8 x 14 47.20 44.84 42.48single track zipper
E 7590 IV Cover, dark 8 x 14 14.00 13.30 12.60F 7583 IV Cover, green, slit at sealed end 8 x 14 14.00 13.30 12.60G 7592 Self-Sealing IV Bag, light, tamper- 8 x 14 35.80 34.01 32.22
evident, easy-write surface,tear-off receipt
H 9548 High Alert IV Bag Cover, light 5 x 71⁄2 14.50 13.78 13.05I 9547 High Alert IV Bag Cover, light 6 x 10 16.10 15.30 14.49