GSM TELEPHONE SGH-I620V GSM TELEPHONE CONTENTS 1. Specification 2. Exploded View and Parts list 3. Chart of Troubleshooting 4. Array course control 5. Block Diagrams 6. PCB Diagrams 7. MAIN Electrical Parts List 8. Reference data 9. Safety Precautions 10. Product Function
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
GSM TELEPHONESGH-I620V
GSM TELEPHONE CONTENTS
1. Specification
2. Exploded View and Parts list
3. Chart of Troubleshooting
4. Array course control
5. Block Diagrams
6. PCB Diagrams
7. MAIN Electrical Parts List
8. Reference data
9. Safety Precautions
10. Product Function
This Service Manual is a property of Samsung Electronics Co.,Ltd.Any unauthorized use of Manual can be punished under applicableInternational and/or domestic law.
Samsung Electronics Co.,Ltd.
2007. 07. Rev.1.0
ⓒ
Country Web SiteNorth America service.samsungportal.comLatin America latin.samsungportal.comCIS cis.samsungportal.comEurope europe.samsungportal.comChina china.samsungportal.comAsia asia.samsungportal.comMideast & Africa mea.samsungportal.com
GSPN (Global Service Partner Network)
Contents
1. Specification1-1. GSM/CDMA General Specification ...........................................................................1-11-2. GSM TX power class ...............................................................................................1-2
2. Exploded View and Parts list2-1. Cellular phone Exploded View ..................................................................................2-12-2. Cellular phone Parts list ............................................................................................2-22-3. Disassembly ...............................................................................................................2-42-4. Assembly ....................................................................................................................2-8
3. Chart of Troubleshooting3-1. Baseband ............................................................................................................3-13-1-1. Power ON .....................................................................................................3-13-1-2. System Initial ................................................................................................3-63-1-3. SIM Part .......................................................................................................3-83-1-4. Charging Part .............................................................................................3-103-1-5. Microphone Part .........................................................................................3-133-1-6. Speaker Part ..............................................................................................3-163-1-7. Receiver Part .............................................................................................3-203-1-8. Camera Part ..............................................................................................3-223-1-9. LCD .............................................................................................................3-26
SAMSUNG Proprietary-Contents may change without notice
1. Specification
1-1
This Document can not be used without Samsung's authorization
1-1. GSM/WCDMA General Specification
EGSM 900Phase 2
DCS1800Phase 1 PCS1900
Freq. Band[MHz]Upl ink/Downl ink
880~915925~960
1710~17851805~1880
1850~19101930~1990
ARFCN range 0~124 & 975~1023 512~885 512~810
Tx/Rx spacing 45 MHz 95 MHz 80 MHz
Mod. Bit rate/Bit Per iod
270.833 kbps3.692 us
270.833 kbps3.692 us
270.833 kbps3.692 us
Time SlotPer iod/Frame
Period
576.9 us4.615 ms
576.9 us4.615 ms
576.9 us4.615 ms
Modulat ion 0.3 GMSK 0.3 GMSK 0.3 GMSK
MS Power 33 dBm~5 dBm 30 dBm~0 dBm 30 dBm~0 dBm
Power Class 5 pcl ~ 19 pcl 0 pcl ~ 15 pcl 0 pcl ~ 15 pcl
Sensi t iv i ty -102 dBm -100 dBm -100 dBm
TDMA Mux 8 8 8
Cel l Radius 35 Km 2 Km -
SAMSUNG Proprietary-Contents may change without notice
Specification
1-2
This Document can not be used without Samsung's authorization
1-2. GSM TX power class
TX Powercontrol level
EGSM900
5 33±2 dBm
6 31±2 dBm
7 29±2 dBm
8 27±2 dBm
9 25±2 dBm
10 23±2 dBm
11 21±2 dBm
12 19±2 dBm
13 17±2 dBm
14 15±2 dBm
15 13±2 dBm
16 11±3 dBm
17 9± 3dBm
18 7±3 dBm
19 5±3 dBm
TX Powercontrol level
DCS1800
0 30±3 dBm
1 28±3 dBm
2 26±3 dBm
3 24±3 dBm
4 22±3 dBm
5 20±3 dBm
6 18±3 dBm
7 16±3 dBm
8 14±3 dBm
9 12±4 dBm
10 10±4 dBm
11 8±4 dBm
12 6±4 dBm
13 4±4 dBm
14 2±5 dBm
15 0±5 dBm
TX Powercontrol level
PCS1900
0 30±3 dBm
1 28±3 dBm
2 26±3 dBm
3 24±3 dBm
4 22±3 dBm
5 20±3 dBm
6 18±3 dBm
7 16±3 dBm
8 14±3 dBm
9 12±4 dBm
10 10±4 dBm
11 8±4 dBm
12 6±4 dBm
13 4±4 dBm
14 2±5 dBm
15 0±5 dBm
SAMSUNG Proprietary-Contents may change without notice
2. Exploded View and Parts List
2-1
This Document can not be used without Samsung's authorization
2-1. Cellular phone Exploded View
QFU01
QFR01
QCR73
QMO01QVK01QSP01
QAN01
QMI04
QCR05
QSP02
QFL01
QCR71
QSC01
QSC30
QPC01
QCA00QAR01QCA01
QVO03
QKP01
QME01
QCR58
QMP01
QAN02
QCR05
QBA01
QBA02
QBA04
QBA00
QMI01
QRE01
QCK01
QSD01QVO01
QCK02QRF03
QMI03
QHI01
QLC01
SAMSUNG Proprietary-Contents may change without notice
Exploded View and Parts List
2-2
This Document can not be used without Samsung's authorization
Design LOC Discription SEC CODE
QAN01 INTENNA-BLUETOOTH FPCB GH42-01242A
QAN02 INTENNA-SGHI620 GH42-01164A
QAR01 AUDIO-RECEIVER 3009-001276
QBA00 ASSY COVER-STD BATT GH98-06204A
QBA01 INNER BATTERY PACK-1200MAH,BLK GH43-02821A
QBA02 INNER BATTERY PACK-1500MAH,BLK GH43-02888A
QBA04 ASSY COVER-EXT BATT GH98-06205A
QCA00 CAMERA MODULE GH59-04159A
QCA01 CAMERA MODULE GH59-04489A
QCR05 SCREW-MACHINE 6001-001478
QCR05 SCREW-MACHINE 6001-001478
QCR58 SCREW-MACHINE 6001-001870
QCR71 SCREW-MACHINE 6001-002095
QCR73 SCREW-MACHINE 6001-002102
QFR01 ASSY CASE-FRONT GH98-03978A
QFU01 ASSY COVER-SLIDE UPPER GH98-03975A
QKP01 ASSY KEYPAD-MAIN(OPEN/WHT) GH98-03980A
QLC01 MEA-LCD MODULE KIT GH97-07916A
QME01 DOME SHEET-DOME SHEET 37 KEY,I GH59-04350A
QMI04 RMO RUBBER-MIC HOLDER GH73-09899A
QMO01 MOTOR DC-SGHI620 GH31-00354A
QMP01 PBA MAIN-SGHI620V GH92-03737A
QPC01 MEA-SLIDE FPCB KIT GH97-07917A
QSC01 TAPE-SCREW GH74-32764A
QSC30 PMO-DAMPER BTM GH72-39894A
QSP01 SPEAKER 3001-002181
QSP02 SPEAKER 3001-002183
QVK01 KEY FPCB-POWER 1 KEY FPC, I620 GH59-04346A
QVO03 PMO-SIDE DECO GH72-37853A
QMI01 MICROPHONE-ASSY-SGHI620 GH30-00353A
QMI03 AS-MIC RUBBER SVC GH81-06793A
2-2. Cellular phone Parts list
SAMSUNG Proprietary-Contents may change without notice
Exploded View and Parts List
2-3
This Document can not be used without Samsung's authorization
QFL01 ASSY COVER-SLIDE LOWER GH98-03976A
QHI01 ASSY HINGE GH98-04165A
QRE01 ASSY CASE-REAR(OMN) GH98-06099A
QRF03 PMO-COVER EAR/IF GH72-37817A
QSD01 PMO-COVER MICRO SD GH72-37830A
QCK02 PMO KEY-POWER GH72-42861A
QVO01 PMO KEY-VOLUME GH72-42862A
QCK01 PMO KEY-CAMERA GH72-42863A
SAMSUNG Proprietary-Contents may change without notice
Exploded View and Parts List
2-4
This Document can not be used without Samsung's authorization
Discription SEC CODE
BAG PE 6902-000634
CBF INTERFACE-DLC,X830,SIL,PCB GH39-00720B
ADAPTOR-SGHE690,SIL,EU,A_TYPE GH44-01361B
CHARGER-BTC,SIL,I620 GH44-01732B
S/W CD GH46-00445A
S/W CD-USER MANUAL,SGHI620V GH46-00453A
EARPHONE-EARPHONE,SGHE490,SIL, GH59-03883B
LABEL(P)-UNIT SEAL GH68-00518B
LABEL(R)-WATER SOAK GH68-09361A
MANUAL USERS-QRG ITALIAN GH68-14922A
LABEL(R)-MAIN(EU_VOD) GH68-15455A
BOX(P)-UNIT MAIN(EU) GH69-05643A
CUSHION-CASE(EU) GH69-05645A
TAPE-REAR A GH74-32822A
TAPE-REAR B GH74-32823A
TAPE GASK GH74-33482A
TAPE-LCD PCB GH74-33526A
TAPE-DOME SHHET A GH74-33527A
TAPE-DOME SHHET B GH74-33528A
TAPE GASK GH74-33529A
TAPE GASK GH74-33715A
SAMSUNG Proprietary-Contents may change without notice
Exploded View and Parts List
2-5
This Document can not be used without Samsung's authorization
1) Unscrew down 6 points in the red circles.※ caution
1) Be care of scratch.
1) Detach the two SCREW SHEETs and REARSHEETs.※ caution
1) Be care of scratch.
1) Remove REAR Case.※ caution1) Be care of scratch.
2
3 4
12-3. Disassembly
① ③
② 1) Seperate the battery from the SET.2) After disassemble the LCD CONNECTOR,
seperate a PCB fixed SCREW 2 POINT.※ caution1) Be care of damage to the WIREs and FPCBs.
SAMSUNG Proprietary-Contents may change without notice
Exploded View and Parts List
2-6
This Document can not be used without Samsung's authorization
1) Disjoin the CONNECTOR from the PBA.※ caution1) Be care of damage to the SLIDE FPCB.
1) Unhook the designated points.※ caution1) Unhook the designated 4 points.
1) Separate the FRONT from the SLIDE ass'y.
※ caution1) Be care of scratch and molding damage.2) Be care of damage to the SLIDE FPCB.
1) Unscrew the 6 points.※ caution1) Be care of damage to the SLIDE FPCB.
6
7 8
5
SAMSUNG Proprietary-Contents may change without notice
Exploded View and Parts List
2-7
This Document can not be used without Samsung's authorization
1) Separate the LOWER from the UPPER ass'y.
※ caution1) Be care of damage to the SLIDE FPCB.
1) Unscrew the 6 points.
※ caution1) Be care of scratch and molding damage.
1) Detach the UPPER DECO and TAPEs.
※ caution1) Be care of scratch and molding damage.
10
11 12
9
1) Disjoin the CONNECTORs from the SUB PBA.
※ caution1) Disjoin the VGA CAMERA, MEGA CAMERA,
WHEEL and TOUCH KEY CONNECTORs.2) Detach the VGA CAMERA, RECEIVER and
MEGA CAMERA to the UPPER.
SAMSUNG Proprietary-Contents may change without notice
Exploded View and Parts List
2-8
This Document can not be used without Samsung's authorization
1)Disjoin the SPEAKER CONNECTORs of the PBA.
※ caution1) Be care of damage to the SPEAKER WIREs.
1) Remove bond and detach the RECEIVERsoldering parts.
※ caution1) Be care of damage to the VGA CAMERA FPCB.
1) Detach the SLIDE FPCB soldering parts.
※ caution1) Be care of damage to the SLIDE FPCB.
1) Separate the LCD MODULE from the UPPER ass'y.※ caution1) Be care of damage to the LCD MODULE.
14
15 16
13
SAMSUNG Proprietary-Contents may change without notice
Exploded View and Parts List
2-9
This Document can not be used without Samsung's authorization
1) Detach the BT ANTENNA FPCB and INTENNAsoldering parts.
※ caution1) Be care of damage to the INTENNA PATTERN.
1) Unscrew the INTENNA.
※ caution1) Be care of damage to the KEY DOME SHEET.
1) Disjoin the MOTOR CONNECTOR of the PBA.
※ caution1) Be care of damage to the MOTOR WIREs.
18
19
17
1) Detach the MIC soldering parts.
※ caution1) Be care of damage to the MIC FPCB.
20
SAMSUNG Proprietary-Contents may change without notice
Exploded View and Parts List
2-10
This Document can not be used without Samsung's authorization
1) Detach the TAPEs.
※ caution1) Detach the three BLACK TAPEs and KEY
DOME SHEET to the PBA.
1) Detach the POWER KEY FPCB soldering parts.
※ caution1) Be care of damage to the POWER KEY FPCB.
2221
SAMSUNG Proprietary-Contents may change without notice
Exploded View and Parts List
2-11
This Document can not be used without Samsung's authorization
1) Solder MIC FPCB and Assemble the MICRUBBER.※ caution
1) Be care of damage to the MIC F-PCB.2) MIC RUBBER HOLE must be faced outside
of the PBA.
1) Attach KEY DOME SHEET and three BLACKTAPEs to MAIN PBA.※ caution1) Attach KEY DOME SHEET with matching holes.2) Attach three BLACK TAPEs to LEDs in the red
squares.
Solder POWER KEY FPCB.※ caution1) Be care of damage to the POWER KEY FPCB.
Screw on the INTENNA.※ caution1) Assemble the INTENNA to MAIN PBA.2) Screw on a INTENNA.
2
3 4
12-4. Assembly
SAMSUNG Proprietary-Contents may change without notice
Exploded View and Parts List
2-12
This Document can not be used without Samsung's authorization
1) Connect MOTOR to the PBA and Attach theGASKET TAPE.※ caution
1) Be care of damage to the MOTORCONNECTOR.
1) Solder BT ANTENNA FPCB and INTENNA.
※ caution1) Be care of damage to the F-PCB of
BT ANTENNA and INTENNA PATTERN.
1) Solder RECEIVER to VGA CAMERA FPCB andbond.
※ caution1) Be care of damage to the F-PCB.
1) Connect LEFT/RIGHT SPEAKERs.
※ caution1) The wire of the LEFT SPEAKER is longer than
RIGHT's one .2) Be care of damage to the MOTORCONNECTOR.
6
7 8
5
+
-+ -
+
-
+
-
SAMSUNG Proprietary-Contents may change without notice
Exploded View and Parts List
2-13
This Document can not be used without Samsung's authorization
1) Assemble the LCD ASS'Y into the UPPER.
※ caution1) Match the two points in the red circles.
1) Attach the INSULATION TAPE.
※ caution1) Attach the INSULATION TAPE to the designated
point.
1) Connect SLIDE FPCB connector and solder.
※ caution1) Be care of damage to the SLIDE FPCB.
1) Attach the GASKET TAPE.
※ caution1) Attach the GASKET TAPE to the SUB BOARD
and LCD PANEL.
10
11 12
9
SAMSUNG Proprietary-Contents may change without notice
Exploded View and Parts List
2-14
This Document can not be used without Samsung's authorization
1) Attach the GASKET TAPE and INSULATIONTAPE.
※ caution1) Match the two points in the red lines.
1) Attach the GASKET TAPE and INSULATIONTAPE.
※ caution1) Match the two points in the red lines.
1) Connect FPCBs to the SUB BOARD and attach.※ caution1) Connect VGA/MEGA CAMERA's FPCB to the
SUB BOARD and attach FPCBs to the LCDPANEL.
2) Connect WHEEL KEY and TOUCH KEYCONNECTOR.
1) Assemble the SUB BOARD into the UPPER.
※ caution1) Match the five points in the red circles.
14
15 16
13
SAMSUNG Proprietary-Contents may change without notice
Exploded View and Parts List
2-15
This Document can not be used without Samsung's authorization
1) Screw on the LOWER to the UPPER Ass'y
※ caution1) Be care of damage to the SLIDE F-PCB.2) Screw 6 points.
1) Assemble LOWER and UPPER Ass'y
※ caution1) Be care of damage to the SLIDE F-PCB.
1) Check up the LOWER.
1) Assemble the UPPER DECO.
※ caution1) Detach the Double-stick's cover and assemblethe
UPPER DECO.
18
19 20
17
SAMSUNG Proprietary-Contents may change without notice
Exploded View and Parts List
2-16
This Document can not be used without Samsung's authorization
1) Put the PBA on the FRONT ass'y.
※ caution1) Be care of damage to the WIREs and FPCBs.2) Hook the three designated points.
1) Connect the SLIDE CONNECTOR.
※ caution1) Be care of damage to the SLIDE F-PCB.
1) Assemble FRONT and SLIDE ass'y.Screw on the FRONT.
※ caution1) Be care of damage to the SLIDE F-PCB.2) Screw 6 points.
1) Detach the two Double-stick's cover andassemble the KEYPAD.
※ caution1) Push the two points in the red circles.
22
23 24
21
SAMSUNG Proprietary-Contents may change without notice
Exploded View and Parts List
2-17
This Document can not be used without Samsung's authorization
1) Assemble the REAR CASE to the assembly.
※ caution1) Check the external damage.
1) Put the LEFT/RIGHT SPEAKER and MOTOR on theFRONT Ass'y.
※ caution1) Be care of damage to the WIREs.
1) Attach the POWER KEY FPCB and the BTANTENNA FPCB.
※ caution1) Be care of damage to the FPCB.
1) Put the PBA on the FRONT ass'y.
※ caution1) Check the PBA hooked the FRONT perfectly.
26
27 28
25
SAMSUNG Proprietary-Contents may change without notice
Exploded View and Parts List
2-18
This Document can not be used without Samsung's authorization
1) Attach the SCREW SHEETs andREAR SHEETs to the designated points.※ caution1) Be care of scratch.
1) Screw down 6 points in the red circle.
※ caution1) Be care of scratch and molding damage.
3029
SAMSUNG Proprietary-Contents may change without notice
3. Flow Chart of TroubleShooting
3-1
This Document can not be used without Samsung's authorization
3-1. Power OnPDA Part
SAMSUNG Proprietary-Contents may change without notice
Flow Chart of Troubleshooting
3-2
This Document can not be used without Samsung's authorization
SAMSUNG Proprietary-Contents may change without notice
Flow Chart of Troubleshooting
3-3
This Document can not be used without Samsung's authorization
SAMSUNG Proprietary-Contents may change without notice
Flow Chart of Troubleshooting
3-4
This Document can not be used without Samsung's authorization
SAMSUNG Proprietary-Contents may change without notice
Flow Chart of Troubleshooting
3-5
This Document can not be used without Samsung's authorization
SAMSUNG Proprietary-Contents may change without notice
Flow Chart of Troubleshooting
3-6
This Document can not be used without Samsung's authorization
3-2. LCD Working
SAMSUNG Proprietary-Contents may change without notice
Flow Chart of Troubleshooting
3-7
This Document can not be used without Samsung's authorization
SAMSUNG Proprietary-Contents may change without notice
Flow Chart of Troubleshooting
3-8
This Document can not be used without Samsung's authorization
3-3. Audio WorkingSpeaker Working
SAMSUNG Proprietary-Contents may change without notice
Flow Chart of Troubleshooting
3-9
This Document can not be used without Samsung's authorization
Reciever Working
SAMSUNG Proprietary-Contents may change without notice
Flow Chart of Troubleshooting
3-10
This Document can not be used without Samsung's authorization
MIC Working
SAMSUNG Proprietary-Contents may change without notice
Flow Chart of Troubleshooting
3-11
This Document can not be used without Samsung's authorization
Hands-Free Stereo Headset Working
SAMSUNG Proprietary-Contents may change without notice
Flow Chart of Troubleshooting
3-12
This Document can not be used without Samsung's authorization
3-4. KEY Working
SAMSUNG Proprietary-Contents may change without notice
Flow Chart of Troubleshooting
3-13
This Document can not be used without Samsung's authorization
SAMSUNG Proprietary-Contents may change without notice
Flow Chart of Troubleshooting
3-14
This Document can not be used without Samsung's authorization
3-5. Vibrator Working
SAMSUNG Proprietary-Contents may change without notice
Flow Chart of Troubleshooting
3-15
This Document can not be used without Samsung's authorization
SAMSUNG Proprietary-Contents may change without notice
Flow Chart of Troubleshooting
3-16
This Document can not be used without Samsung's authorization
3-6. T-Flash Card Working
SAMSUNG Proprietary-Contents may change without notice
Flow Chart of Troubleshooting
3-17
This Document can not be used without Samsung's authorization
SAMSUNG Proprietary-Contents may change without notice
Flow Chart of Troubleshooting
3-18
This Document can not be used without Samsung's authorization
3-7.RF3-7-1. EGSM Receiver
Continuous RX ONRF Input : 62 CH
AMP : -50dBm
NORMAL CONDITIONCatch the channel ?
YES
NO
U701 CheckPin #12 ≥ -55dBm ?
U701 CheckPin #13 ≥ -55dBm ?
U700 CheckPin#37,38 ≥ -55dBm ?
Check antenna contact
U701 Resolder or Change
U701 Resolder or Change
THE END
NO
NO
YES
YES
YES
Check the path of U701 andU700
NO
SAMSUNG Proprietary-Contents may change without notice
Flow Chart of Troubleshooting
3-19
This Document can not be used without Samsung's authorization
3-7-2. EGSM Transmitter
YES
YES
YES
YES
Tx ON(Level : 5)
battery voltage : 3.8V
YES
NO
NO
NO
NO
NO
U701 CheckPin #22 ≥ 30dBm ?
PAM702 CheckPin #9 ≥ 30dBm ?
U701 CheckPin#6 ≥30dBm?
VCO800 CheckPin #1 ≒ 6dBm ?
THE END
U701 Resolder or Change
VCO800 Resolder
VCO800 Resolder or Change orCheck the path of VCO800 &
PAM702
Check the U700
U701 Resolder or Change orCheck the path of U701 & PAM702
U700 CheckPin#40 ≤ 2.3V ?
SAMSUNG Proprietary-Contents may change without notice
Flow Chart of Troubleshooting
3-20
This Document can not be used without Samsung's authorization
3-7-3. DCS Receiver
Continuous RX ONRF Input : 698 CH
AMP : -50dBm
NORMAL CONDITIONCatch the channel ?
YES
NO
U701 CheckPin #14≥ -55dBm ?
U701 CheckPin #15 ≥ -55dBm ?
U700 CheckPin#34,35 ≥ -55dBm ?
Check antenna contact
U701Resolder or Change
U701 Resolder orChange
THE END
NO
NO
YES
YES
YES
Check the path of U700and U701NO
SAMSUNG Proprietary-Contents may change without notice
Flow Chart of Troubleshooting
3-21
This Document can not be used without Samsung's authorization
3-7-4. DCS Transmitter
Tx ON(Level : 0)
battery voltage : 3.8V
YES
NO
VCO800 CheckPin #5 ≒ 6dBm ?
PAM702 CheckPin #15 ≥ 27dBm ?
U701 CheckPin#6 ≥ 27dBm?
Check the U700
VCO800 Resolder
VCO800 Resolder or Change orCheck the path of VCO800 & PAM702
THE END
NO
NO
YES
YES
YES
Check the U701
U701 CheckPin #20 ≥ 27dBm?
U701 Resolder or Change orCheck the path of U701 & PAM702NO
YES
NO
U700 CheckPin#40 ≤ 2.3V ?
SAMSUNG Proprietary-Contents may change without notice
Flow Chart of Troubleshooting
3-22
This Document can not be used without Samsung's authorization
3-7-5. PCS Receiver
U701 CheckPin #17 ≥ -55dBm?
NO Check the path of U701& U700
YES
YES
YES
NO
NO
THE END
U701 Resolder or Change
U701 Resolder or Change
Check antenna contact
U700 CheckPin#24,25 ≥ -55dBm?
U701 CheckPin #16 ≥ -55dBm?
NO
YES
NORMAL CONDITIONCatch the channel?
Continuous RX ONRF Input : 698 CH
AMP : -50dBm
SAMSUNG Proprietary-Contents may change without notice
Flow Chart of Troubleshooting
3-23
This Document can not be used without Samsung's authorization
3-7-6. PCS Transmitter
VCO800 Resolder
U701 CheckPin #20 ≥ 27dBm ?
U701 CheckPin#6 ≥ 27dBm?
U701 Resolder or Change orCheck the path of U701 & PAM702
VCO800 Resolder or Change orCheck the path of VCO800 & PAM702
U700 CheckPin#40 ≤ 2.3V ?
Tx ON(Level : 0)
battery voltage : 3.8V
YES
NO
VCO800 CheckPin #5 ≒ 6dBm ?
PAM702 CheckPin #15 ≥ 27dBm ?
Check the U700
THE END
NO
NO
YES
YES
YES
Check the U701
NO
YES
NO
SAMSUNG Proprietary-Contents may change without notice
Flow Chart of Troubleshooting
3-24
This Document can not be used without Samsung's authorization
SAMSUNG Proprietary-Contents may change without notice
Flow Chart of Troubleshooting
3-25
This Document can not be used without Samsung's authorization
3-7-7. UMTS Receiver
Continuous RX ONRF Input : 10700 CH
AMP : -40dBm
NORMALCONDITION
Catch the channel ?
YES
NO
U701 CheckPin #6 ≥ -45dBm ?
U701 CheckPin #4 ≥ -45dBm ?
U802 CheckPin#18 ≥ -65dBm ?
Check antenna contack
U701 Resolder or Change
U701 Resolder or Change
THE END
NO
NO
YES
YES
YES
U802 Resolder or change
F801 CheckPin #5 ≥ -45dBm ? F801 Resolder or change
NO
YES
NO
F802 Resolder or change
Change the path of F802
and U802
U802 check
pin#8,9 ≥ -65dBm
F802 check
pin#1 ≥ -65dBm?
YES
YES
NO
NO
SAMSUNG Proprietary-Contents may change without notice
Flow Chart of Troubleshooting
3-26
This Document can not be used without Samsung's authorization
3-7-8. UMTS Transmitter
Tx ONRF output : 9750 CHOUT PWR : 22dBm
CN700 CheckPin #2 ≥ 22dBm ?
YES
NO
U701 CheckPin #6 ≥ 22dBm ?
F801 CheckPin #8 ≥ 22dBm ?
PAM800 CheckPin#8 ≥ 24dBm ?
CN700 Resolder or Change
U701 Resolder or Change
F801 Resolder or Change
THE END
NO
NO
YES
YES
PAM800 Resolder or change
NO
F800 Resolder or change
or Check the C700>1.5V
U700 Resolder or change
YES
YES
YES
NO
NO
F800 check
pin#3 ≥ -10dBm ?
U700 check
pin#51 ≥ -10dBm
SAMSUNG Proprietary-Contents may change without notice
Flow Chart of Troubleshooting
3-27
This Document can not be used without Samsung's authorization
SAMSUNG Proprietary-Contents may change without notice
4. Array course control
4-3
This Document can not be used without Samsung's authorization
◈ Pre - Built (For Zigbox Users)
1. Install the SAMSUNG Mobile USB Driver1.1 Unzip the Samsung Mobile USB Driver1.2 Execute “setup.exe” to install the SAMSUNG USB Driver
2. Install the PHONE Driver1.1 Unzip the Phone Driver
1.2 Execute “setup.exe” to install the PHONE Driver3. Install the ACTIVESYNC 4.5
1.1 Unzip the ActiveSync 4.51.2 Execute “setup.exe” to install the ActiveSync 4.51.3 Uncheck the Allow USB connections and press “OK”
◈ Physical Settings
1. Setting Physical Environment
SAMSUNG Proprietary-Contents may change without notice
Array course control
4-2
This Document can not be used without Samsung's authorization
1.1 Connect the USB cable to PC
1.2 Set the both JIG and PWR switch to OFF
SAMSUNG Proprietary-Contents may change without notice
Array course control
4-3
This Document can not be used without Samsung's authorization
1.3 Connect the Data Cable to Device
◈ Downloading the Image
1. Execute the WCEDownloader v1.1Single1.1 Unzip the WCEDownloader1.2 Execute WCEDownloader v1.1Single.exe to Run Program
SAMSUNG Proprietary-Contents may change without notice
Array course control
4-4
This Document can not be used without Samsung's authorization
1.3 Download wave image from our FTP site.
- I620V_rev08_eboot.nb0 : Eboot ROM Image- ONENAND.bin : PDA ROM Image- I620BUGD5_CP_yyyy-mm-dd.bin : Phone Binary
1.4 Load the Image File to Download
SAMSUNG Proprietary-Contents may change without notice
Array course control
4-5
This Document can not be used without Samsung's authorization
- Press “EBOOT” and Select I620V_rev08_eboot.nb0 to download
- Press “PDA” and Select ONENAND.bin to download
SAMSUNG Proprietary-Contents may change without notice
Array course control
4-6
This Document can not be used without Samsung's authorization
- Press “PHONE” and Select i620BUGD5_CP_yyyy-mm-dd.bin to download
1.5 Press the ENTER Button
SAMSUNG Proprietary-Contents may change without notice
Array course control
4-7
This Document can not be used without Samsung's authorization
Press the ENTER Button.While pressing the Enter button, set the both JIG and PWR switch to ON.Do not release the Enter button yet!!
Do not release the Enter button yet!!
Following paragraph is seen in your device, then you can release the Enter button.
SAMSUNG Proprietary-Contents may change without notice
Array course control
4-8
This Document can not be used without Samsung's authorization
1.6 Click the Start DownloadButton
1.7 The download process starts sequentially
SAMSUNG Proprietary-Contents may change without notice
Array course control
4-9
This Document can not be used without Samsung's authorization
< Eboot Downloading >
< PDA Downloading >
SAMSUNG Proprietary-Contents may change without notice
Array course control
4-10
This Document can not be used without Samsung's authorization
< PHONE Downloading >
※ Sometimes yon can see the following message when you are downloading the Phone Image. Ifyou see the “Port open fail” message, you make a try to use another USB ports.
When the Eboot & PDA download process starts, you can see the following progress bar.But Phone download process starts, progress bar can’t seen in your device.
SAMSUNG Proprietary-Contents may change without notice
Array course control
4-11
This Document can not be used without Samsung's authorization
3. 7 Completed Download.
If the download finishes successfully, device resetting performs automatically.
SAMSUNG Proprietary-Contents may change without notice
Array course control
4-12
This Document can not be used without Samsung's authorization
Congratulations~! All processes are completed.
SAMSUNG Proprietary-Contents may change without notice
Array course control
4-13
This Document can not be used without Samsung's authorization
◈ Pre - Built (For USB Cable Users)
1. Install the SAMSUNG Mobile USB Driver1.1 Unzip the Samsung Mobile USB Driver1.2 Execute “setup.exe” to install the SAMSUNG USB Driver
2. Install the PHONE Driver1.1 Unzip the Phone Driver
1.2 Execute “setup.exe” to install the PHONE Driver3. Install the ACTIVESYNC 4.5
1.1 Unzip the ActiveSync 4.51.2 Execute “setup.exe” to install the ActiveSync 4.51.3 Uncheck the Allow USB connections and press “OK”
◈ Physical Settings
1. Setting Physical Environment
1.1 Connect the USB cable to PC
SAMSUNG Proprietary-Contents may change without notice
Array course control
4-14
This Document can not be used without Samsung's authorization
1.2 Connect the Data Cable to Device
◈ Downloading the Image
1. Execute the WCEDownloader v1.1Single1.1 Unzip the WCEDownloader1.2 Execute WCEDownloader v1.1Single.exe to Run Program
SAMSUNG Proprietary-Contents may change without notice
Array course control
4-15
This Document can not be used without Samsung's authorization
1.3 Download wave image from our FTP site.
- I620V_rev01_eboot.nb0 : Eboot ROM Image- ONENAND.bin : PDA ROM Image- I620BUGC2_CP.bin : Phone Binary
1.4 Load the Image File to Download
SAMSUNG Proprietary-Contents may change without notice
Array course control
4-16
This Document can not be used without Samsung's authorization
- Press “EBOOT” and Select I620V_rev08_eboot.nb0 to download
- Press “PDA” and Select ONENAND.bin to download
SAMSUNG Proprietary-Contents may change without notice
Array course control
4-17
This Document can not be used without Samsung's authorization
- Press “PHONE” and Select i620BUGD5_CP_yyyy-mm-dd.bin to download
SAMSUNG Proprietary-Contents may change without notice
Array course control
4-18
This Document can not be used without Samsung's authorization
1.5 Press the ENTER Button
Press the ENTER Button.While pressing the Enter button, press the POWER Button.
Do not release the Enter button yet!!
Following paragraph is seen in your device, then you can release the Enter button.
SAMSUNG Proprietary-Contents may change without notice
Array course control
4-19
This Document can not be used without Samsung's authorization
1.6 Click the Start DownloadButton
SAMSUNG Proprietary-Contents may change without notice
Array course control
4-20
This Document can not be used without Samsung's authorization
1.7 The download process starts sequentially
< Eboot Downloading >
< PDA Downloading >
SAMSUNG Proprietary-Contents may change without notice
Array course control
4-21
This Document can not be used without Samsung's authorization
< PHONE Downloading >
※ Sometimes yon can see the following message when you are downloading the Phone Image. Ifyou see the “Port open fail” message, you make a try to use another USB ports.
When the Eboot & PDA download process starts, you can see the following progress bar.But Phone download process starts, progress bar can’t seen in your device.
SAMSUNG Proprietary-Contents may change without notice
Array course control
4-22
This Document can not be used without Samsung's authorization
3. 7Completed Download.
If the download finishes successfully, device resetting performs automatically.
SAMSUNG Proprietary-Contents may change without notice
Array course control
4-23
This Document can not be used without Samsung's authorization
Congratulations~! All processes are completed.
SAMSUNG Proprietary-Contents may change without notice
5. Block Diagrams
5-2
This Document can not be used without Samsung's authorization
SAMSUNG Proprietary-Contents may change without notice
6. PCB Diagrams
6-1
This Document can not be used without Samsung's authorization
AN201
ANT ANT_GND1
BAT407
BOTHHOLE100
BOTHHOLE101
BOTHHOLE102
BOTHHOLE103
BTC506
CD
401
CN309
CN700
D401
D402
D403
D501
D503
D505D506D507
D508D509
D510
D511
D512
D527
F300
F800
F801
F802
IFC505
JTAG100
MIC_PAD
MOD206MSM_TCKMSM_TDI
OMAP_RTCK
OMAP_TCK OMAP_TDI
OMAP_TMS
OSC
100O
SC101
OSC600
PAM702
PAM800Q800
SIM400
SPK_L
SPK_R
SW_C
A M
SW
_DO
WN
SW_U
P
TA209
TA211
TA228
TA459
TA460
TA474
TA521TA532
TA739
TCX801
TH701
201PT101PT TP103 TP104TP105 TP106 801PT701PT
TP701
TR401
TR402
U105
U304
U307
U401
U404
U405
U406
U41 4
U415
U416
U418U501
U700
U701
U801
U802
U804
UC
D20 0
UC
P10 1
UCP600
UM
E30 0
UM
E30 1
UME601
VCO800
ZD502
ZD503
ZD504
ZD505
ZD506
ZD507
ZD508
ZD510
SAMSUNG Proprietary-Contents may change without notice
PCB Diagrams
6-2
This Document can not be used without Samsung's authorization
A
A1(1)
A2(1)
AMUX_OUT
BC
CN
101
CO
MM
A
D
D1(15)
D2(0)
D40
0
D51
3 D51
4
D51
5D
516
D51
7D
518
D51
9
D52
0D
521
D52
2
D52
3D524 D52
5
D526
DDR_A(0)
DDR_D(0)
DDR_nCAS
DDR_nCS
DDR_nRAS
DDR_nWE
DEL
E
EN
TER
F
F201
F202
F401
F402
F403
F500
F501 F502
F503
F504
F505F506
F507
FLASH_ADV
FLASH_CLK
FONE_RST
FPC501
FUN
C
G H
I
J K L
L405
M
MA I
L
MOTOR
MSM_PS_HOLD
MSM_RTCK MSM_TDOMSM_TMS MSM_TRST
MU
TEN
NAND_A(1)
NAND_ALE
NAND_CS
NAND_D(0)NAND_NFCS_3
NAND_NFOE
NAND_NFWE
NAND_RE
NAND_WE
NU
M
OO
DT
OMAP_TDO
OSC400
P
PON_RESET_N
Q
R
S
SDRAM_CAS
SDRAM_CS0SDRAM_CS1
SDRAM_RASSDRAM_WE
SH
ARP
SH
IFT
SIDE_LED1 SIDE_LED2SIDE_LED3
SLEEP_CLK
SP
A CE
T
TA21
0
TA25
6
TA475 TA52
2
TCXO_EN
TH301
TP702
TP_AA23
TP_AC17
TP_AC18
TP_RESOUT_N
TP_XTAL_OUT
TR40
3
TR40
4
UU101
U10
3
U204
U205U206
U30
2
U303U305
U30
6
U308
U31
0
U400
U40
2
U407
U411
U413
U417
U502
U602
U80
6UWIRE_CLK
UWIRE_CS1_CODEC
UWIRE_SDO
V
V101
V102
V103
W
X
Y
Z
ZD50
0ZD
501
nCS_DPRAM_MSMnCS_DPRAM_OMAP
SAMSUNG Proprietary-Contents may change without notice
7. MAIN Electrical Parts List
7-1
This Document can not be used without Samsung's authorization
SAMSUNG Proprietary-Contents may change without notice
Main Electrical Parts List
7-18
This Document can not be used without Samsung's authorization
SEC CODE Design LOC Discription STATUS3711-005945 CN101 HEADER-BOARD TO BOARD SA3711-006137 BTC506 HEADER-BATTERY SA4302-001181 BAT407 BATTERY-LI(2ND) SA4709-001413 MOD206 BLUETOOTH MODULE SA
SAMSUNG Proprietary-Contents may change without notice
8. Reference data
8-1
This Document can not be used without Samsung's authorization
8-1. Reference Abbreviate
AAC: Advanced Audio Coding.AVC : Advanced Video Coding.BER : Bit Error RateBPSK: Binary Phase Shift KeyingCA : Conditional AccessCDM : Code Division MultiplexingC/I : Carrier to InterferenceDMB : Digital Multimedia BroadcastingEN : European StandardES : Elementary StreamETSI: European Telecommunications Standards InstituteMPEG: Moving Picture Experts GroupPN : Pseudo-random NoisePS : Pilot SymbolQPSK: Quadrature Phase Shift KeyingRS : Reed-SolomonSI : Service InformationTDM : Time Division MultiplexingTS : Transport Stream
SAMSUNG Proprietary-Contents may change without notice
9. Safety Precautions
9-1
This Document can not be used without Samsung's authorization
9-1. Repair Precaution
● Repair in Shield Box, during detailed tuning.Take specially care of tuning or test,because specipicty of cellular phone is sensitive for surrounding interference(RF noise).
● Be careful to use a kind of magnetic object or tool,because performance of parts is damaged by the influence of manetic force.
● Surely use a standard screwdriver when you disassemble this product,otherwise screw will be worn away.
● Use a thicken twisted wire when you measure level.A thicken twisted wire has low resistance, therefore error of measurement is few.
● Repair after separate Test Pack and Set because for short danger (for example anovercurrent and furious flames of parts etc) when you repair board in condition ofconnecting Test Pack and tuning on.
● Take specially care of soldering, because Land of PCB is small and weak in heat.
● Surely tune on/off while using AC power plug, because a repair of battery charger isdangerous when tuning ON/OFF PBA and Connector after disassembing charger.
● Don't use as you pleases after change other material than replacement registered on SECSystem.Otherwise engineer in charge isn't charged with problem that you don't keep this rules.
SAMSUNG Proprietary-Contents may change without notice
Safety Precautions
9-2
This Document can not be used without Samsung's authorization
Several semiconductor may be damaged easilly by static electricity. Such parts are called byESD(Electrostatically Sensitive Devices), for example IC,BGA chip etc. Read Precaution below.You can prevent from ESD damage by static electricity.
● Remove static electricity remained your body before you touch semiconductor or parts withsemiconductor. There are ways that you touch an earthed place or wear static electricityprevention string on wrist.
● Use earthed soldering steel when you connect or disconnect ESD.
● Use soldering removing tool to break static electricity. , otherwise ESD will be damaged bystatic electricity.
● Don't unpack until you set up ESD on product. Because most of ESD are packed by boxand aluminum plate to have conductive power,they are prevented from static electricity.
● You must maintain electric contact between ESD and place due to be set up until ESD isconnected completely to the proper place or a circuit board.
SAMSUNG Proprietary-Contents may change without notice
10. Product Function
10-1
This Document can not be used without Samsung's authorization
Main Function- Message, Internet, Messenger- Camera- Windows Media Player- Google Maps- Bluetooth