1. Precaution 2. Product Specification 3. Disassembly & Reassembly 4. Troubleshooting 5. Exploded View & Part List 6. Wiring Diagram 7. Schematic Diagram PS-42C91H Refer to the service manual in the GSPN (see the rear cover) for the more information.
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
1. Precaution
2. Product Specification
3. Disassembly & Reassembly
4. Troubleshooting
5. Exploded View & Part List
6. Wiring Diagram
7. Schematic Diagram
PS-42C91H
Refer to the service manual in the GSPN (see the rear cover) for the more information.
This Service Manual is a property of Samsung Electronics Co.,Ltd.Any unauthorized use of Manual can be punished under applicableInternational and/or domestic law.
Area Web SiteNorth America service.samsungportal.comLatin America latin.samsungportal.comCIS cis.samsungportal.comEurope europe.samsungportal.comChina china.samsungportal.comAsia asia.samsungportal.comMideast & Africa mea.samsungportal.com
Screen Size 42 Inches (16:9) 50 Inches (16:9)Dimensions (WxHxD) 1055 x 775 x 341 mm (With stand) 1227.1 x 861.3 x 341 mm (With stand)
Weight 40.4 kg (With stand) 49.7 kg (With stand)Voltage AC 100~240V, 50/60Hz
Colour System PAL, SECAM, NTSC4.43, NTSC 3.58Sound System BG, DK, I, M PC Resolution 1024 x 768 @ 60/75Hz 1360 x 768 @ 120 Hz
ANTENNA input AIR IN (75Ω unbalanced)
VIDEO input
SCART1, SCART2AV1, AV2S-VIDEO
COMPONENT1 - 480i/480p/720p/1080iPC
HDMI1/2 (DVI Compatible HDMI) (Option)
AUDIO input
SCART1, SCART2AV1, AV2S-VIDEO
COMPONENT1 - 480i/480p/720p/1080iPCDVI
Audio Output AUDIO (L/R)Speaker Output 10W + 10W
Product Specification
2-2 Samsung Electronics
2-2 Specifications Analysis
Model PS-42C91H (Lily-42HD) PS-50C91H (Lily-50HD) PS-42P7HD (Alps-42HD)
Design
Basic
Display Type PDP TV PDP TV PDP TVBuilt-In Tuner O O OPC Resolution 1024 x 768 @60Hz 1360 x 768 @120Hz 1024 x 768 @75HzPDP Module W2A W2A V5.1Screen Size 42 inches 50 inches 42 inches
Aspect Ratio 16 : 9 16 : 9 16 : 9Dimensions (WxHxD) 1055 x 775 x 341 mm (With stand) 1227.1 x 861.3 x 341 mm (With stand) 1055 x 775 x 341 mm (With stand)
Weight 40.4 Kg (With stand) 49.7 Kg (With stand) 40.4 kg (With stand)
42" Loc. No. 50" Loc. No. DescriptionCN5401 CN5401 Module and Y-Main Scan ConnectCN5402 CN5402 Module and Y-Main Scan ConnectCN5403 CN5403 Module and Y-Main Scan Connect
- CN5412 Y-Main Scan(High) and Y-Main Scan(Low) ConnectCN5501 CN5501 Module and Y-Main Scan ConnectCN5502 CN5502 Module and Y-Main Scan ConnectCN5503 CN5503 Module and Y-Main Scan ConnectCN5407 CN5407 Y-Drive and Y-Main Scan ConnectCN5408 CN5408 Y-Drive and Y-Main Scan ConnectCN5409 CN5409 Y-Drive and Y-Main Scan ConnectCN5412 CN5412 Y-Drive and Y-Main Scan ConnectCN5707 CN5707 Y-Drive and SMPS ConnectCN5701 CN5701 Y-Drive and Logic Board ConnectCN810 CN810 Y-Drive and SMPS ConnectCN809 CN809 X-Drive and SMPS ConnectCN808 CN808 SMPS and F-Buffer ConnectCN807 CN807 SMPS and Logic Board ConnectCN801 CN801 SMPS and Main Board ConnectCN800 CN800 SMPS and AC-Inlet Connect
CN4701 CN4701 SMPS and X-Drive ConnectCN4004 CN4004 Logic Board and X-Drive ConnectCN4002 CN4002 Module and X-Drive ConnectCN4001 CN4001 Module and X-Drive Connect
- CN4000 Module and X-Drive ConnectCN2000 CN2000 SMPS and Logic Board ConnectCN2001 CN2001 Main Board and Logic Board ConnectCN2002 CN2002 Y-Drive and Logic Board ConnectCN2004 CN2004 Logic Board and F-Buffer ConnectCN2028 CN2028 Logic Board and E-Buffer ConnectCN2500 CN2500 Logic Board and E-Buffer ConnectCN2510 CN2510 E-Buffer and F-Buffer ConnectCN2610 CN2610 E-Buffer and F-Buffer ConnectCN2600 CN2600 Logic Board and F-Buffer ConnectCN2609 CN2609 SMPS and F-Buffer ConnectCN1101 CN1101 SMPS and Main Board ConnectCN2202 CN2202 Main Board and Logic Board ConnectCN1605 CN1605 Function Assy and Main Board ConnectCN1404 CN1404 Side AV Assy and Main Board Connect
6-1-1 Connector role
Wiring Diagram
Samsung Electronics 6-7
42" Loc. No. 50" Loc. No. DescriptionCN1606 CN1606 Power SW Assy and Main Board ConnectCN1203 CN1203 Speaker and Main Board ConnectCN101 CN101 Side AV Assy and Main Board Connect
CN1 CN1 Function Assy and Main Board ConnectCN3 CN3 Power SW Assy and Main Board Connect
■ SMPS BoardThe SMPS used for the PDP has been designed to be efficient, compact and lightweight. For VS and VA outputs, a LLC converterhas been used. For the other outputs, a Flyback converter has been used.
■ LOGIC BoardThe logic circuit consists of a Logic Main Board and an Address Buffer Board. The Logic Main Board decodes the video signalencoded by the Video Board, outputs the ADDRESS data signal for each pattern and generates X and Y drive signals. TheAddress Buffer Board buffers and transfers the ADDRESS data output signal using TCP IC.
- LVDS with built-in video signal processing (W/L, error diffusion, APC, FCR, etc.) applied and 1 ASIC chip.- Outputs the address Drive IC control and data signals to the Buffer Board.- Outputs the control signal for the X and Y Drive Boards.- Monitors major drive voltages (Micom Circuit Block); detects if a surge voltage has been applied and protects the Drive Circuit.- Temperature Adaptive Operating Mode (Low Temperature/Room Temperature/High Temperature); Discharge optimization for
each temperature level.
■ X-MAIN BoardConnects to the X terminal block, 1) provides maintaining voltage waveform (including ERC), and 2) maintains the Ve bias in theScan section.
■ Y-MAIN BoardConnects to the Y terminal block, 1) provides maintaining voltage waveform (including ERC), 2) provides Y Rising, Falling Rampwaveforms, and 3) maintains the Vscan bias.
■ Address Buffer BoardIt delivers the data signal and control signal to the TCP.
7-2 Samsung Electronics
MEMO
Samsung Electronics
Schematic Diagram
7-3
rewoP yb dnatS
SBVC
NOITPO
NOITPO HCNI PDP
)511000-7002(mho28 : TN)611000-7002(mho021 : UE
PO_921R
LCS
)V81:PDP(
FFO:H
V5
A97000-04NB LAP
RENUT
REWOP
DDA noitpO ANLANL_601DB
SA
CGATFA
NO REWOP:L
noitcnuF
NOITPO HCNI DCL
MOTTOB NITNIRP KLIS
ADS
V33
ANL_441C_,ANL_341C
CN
CN
CN
FIS
511PT1
601R
V5_UT1
V5A
mho22P_431R
W01/1
Fn001
EN106J12CIC
SV21B ACCV_V5B
301C
123
011DB
Fn001051C
MM
BD
4148
SE
D10
3
PF330ABEBF_011CI
I1G
2
O 3
1
901CFu22
V61
Fp74321C
441PT
MM
BD
4148
SE
D10
2
123
V52
W01/1mhoK7.4
451CFn001
Fn01421C
331R
_73
Fu22V61
031C
1
mho0W01/1
ANL_441C
T_V5B
SBVC
141PT
1
Fn001
811PT1
V3.3A
Fn001EBF_181C
V21B
FERX
211PT1
Fn001ED_311C
401U1
V3.3A
ANL_601DB
1
821RmhoK022
W01/1651R mho001
911PT
Fn001V61
351C
3
PMA_DNUOS
Hu22401L
501CI5T33TD7111PCN
JDA
12
TUOVNIV
V61
ANL_341CFu74
V61
841RmhoK001
Fu22TPC_701C
W01/1
FERX
Fn01521C
6789
T_V5B
721R
mhoK001
91
2
0212223242
345
1
011121314151617181
_24
C42-002WMS101NC
mho0W01/1
611R
W01/1mhoK2.8
121CFp74
Fn001411C
371CFn001
921PT1
911RW01/1
EBF_871CFn001
Q-K2142CS2E
BC
mhoK1
231PT
1
201Q
131PT
1
1_V5A
Fn01931C
1NI
2
DNG
3TUO
Fn001
671CV61
V61
TPC_201CIU54TA21D87G
EBC
Fu01361C
621PT
1
Y-3261CSK501Q
mho001551RW01/1
DNG4
BF56
PMOC
7NE
8SS
1DNGM
V9B
ND3851PM
1SB
NI23
WS
621CFu001
V61
DV3.3B
901CI
071CFn3.3
V05
V52
101LHu9.3 mho033
Fn001
061C
Fn01
011R
411R
W01/1mhoK01
041C
231C
801PT1
TP11
6
1
V61Fu22
Fn001EBF_971C V61
Fu001EBF_081C
651C
V52Fn001
FERX
501R
581CFn01
101C
L2007N2601Q
MM
BD
4148
SE
D10
1
123
Fn001
ES8414DBMM501D
1
23
601D33C48XZB
TV_UT1
301QQ-K2142CS2
E
BC
301U1
Fu001151C
W01/1
ED_231R
401DBA B
mhoK7.4
711R mho74
V05Fp74
021PT
1
C16
4
271C
Y-3261CSK
E
BC
10uF
16V
TFA1
ED_101Q
751CFn001
V52
101PT
1
481CFn01
ED_451R
mhoK22311R
mhoK7.4
mhoK001201R
EN106J12CIC701DB
1
V3.3A
Fn001511C
Fu1141C
411PT
Fu001251C
V05
LCS_UT1
FERX
221C
V9B
011PT1
111PT
1
Fn01
Fn001711C
1
FERX
701PT 1
1
JDA
TUOV23
NIV
A3.3BTS
711PT
821PT1
601CIA52-D7111PA
1TL6V5C48XZBED_401D
12
3 211CFn001
811R mho74
FERX
mhoK022221R
W01/1131R
mhoK7.4
421PT
1
Fu01
471CV61
111C
V61Fu22
PMA_DNUOS
1_V5A
661CFp001
2028_V5.2B
Fn001861C
Fn001
601PT 1
V52
201L
551C
V52
mhoK2.2
Hu022
E
BC
901R
W01/1
Fp081V05
961C
L_401QQ-K2142CS2
AB
201U1
FERX
LENAP_CCV
801DB
Fn001841C
FERX
021R
V61Fu22
L_911C
V61
ACCV_V5B
W01/1mhoK51
1
JDA
2TUOV
3NIV
Fn001131C
401CIA33-D7111PA
mhoK01301R
mhoK1ED_351R
mho57
W01/1
DV8.1B
A8.1BTS
V5B
621R
mhoK1511R
W01/1
561C
531CFp022
1
Fp001
011CFu1V01
1_V5A
031PT021C
Fu001V61
FERX
ED_251RmhoK1
701D
mho33741R
1
42SS
EN106J12CIC501DB
ADS_UT
1
JDA
TUOV2
NIV3 TUOV
241CFn7.4
1
631CFu22V61
123
631PT
221PT
1
P30-002WAMSP_401NC
301LHu086
FERX
Fn01611C
161CFu001
V61
mhoK51W01/1
121R
821C
L_211RmhoK7.4
V05Fn01
Fn001
2028_V3.3B
FERX
171C
Fn01
951CFu021
V3.6
1
JDAO 23 I
731C
321PT
1
801CI0.5-KRTD96233CM
_23
W01/1mho0mho0
W01/1
_62
601CFn001
501C
V61Fu001
W01/1mho0
401C
V61Fu001
IMDH_DV3.3B
Fu001721C
V61
_04
89
_32
W01/1mho0
1
01
234567
531PT1
FERX
)P(P01-002WAMS201NC
FERX
FIS1
mho0
EBF_141RW01/1
mho022
ACCV_V5B
FERX
V61Fn001
761C
ED_101R
1
311PT
1
A8.1BTS
-
PO_101DB
1A2B
121PT
541CFu22
V61
DV8.1B
W01/1
EBF_041Rmho015
FERX
NI1
DNG
2
3TUO
TUO
901DBT-510-L2102BCA
mhoK1341R
701CIA81-E7111PA
831PT1
641CFn001
mho001W01/1
Fn001TPC_801C
mhoK5.1
521R
ED_941CFn001
701R
mho0
731PT1
_64
_05
W01/1
EBF_771CFu001
V61
mho0W01/1
331C
CGA1
V5A
V61Fn001
CN_UT1
W01/1031R
mhoK74
mhoK15W01/1
V33B
Fu01V61
741C
421R
mhoK1241R
401R
801RmhoK7.4
641Rmho33
mhoK01
1
1
EN106J12CIC111DB
U10
1
201C
901PT
Fn01811C
Fn01
1
FERX
521PT
1
041PT
Fn001
921CFn001
931PT
1
V52
261C
331PT
1
751Rmho0
W01/1mho0
8414LLMP901D
SA_UT1
321R
1
V9B
831CFn2.2
Fn01V05
431PT
EBF_381CFn001
851C
571CV61
FERX
PO_921Rmho28
Fn001
1234 5
678
mhoK001
301CIA3399SDF
PF90M871AB1
NI
2
DNG
3TUO
111R
TP10
5
1
101CI
1DNGM
2DNGM
3DNGM
4DNGM
V5A
Fn74431C
1TUPNI_YEK2TUPNI_YEK
EPYT_TEN_TLUAFED RTNC_DEL
RI
RTNC_DEL_RIDAGB
EPYT_TEN_TLUAFED REZZUB_RID
DNGP
DNGP
REZZUB
DNGP
DNGRENUT
TV_RENUT
DNGP
REWOP_WS
DNGP
DNGP
DNGRENUT
DNGP
TV_RENUT
DNGP
DNGP
DNGRENUT
DNGP
DNG_TM
WS_BTS
DNGP
DNG_TM
DNGP
TFA_RENUT
V5_LCS
V5_ADS
DNGRENUT
DNGRENUT
DNGRENUT
DNGRENUT
DNGRENUT
FIS
DNGRENUT
DNGP
DNGRENUT
DER_DEL
DNGP
DNGP
CCVP_WS
DNGP
DNGRENUT
SBVC_RENUT
DNGP
DNGP
DNGD
DNGP
DNGP
This Document can not be used without Samsung’s authorization.
7-2 Schematic Diagram
PowerVideoAudio
7-2-1 POWER_ETC
Schematic Diagram
7-4 Samsung Electronics
GR
NB
LUE
RE
DW
HT
RE
D
RE
DW
HIT
E
RE
DW
HIT
E
GN
D
RE
DG
RE
EN
BLU
E
RE
DW
HIT
E
YE
LLO
WW
HIT
ER
ED
)070000-7002(mho0 : TN
2TRACS
PO_362R
ffutS toN
)480000-7002(mhok7.4 : UE
TUPNI_1VATUPNI_4D
DNUOS_4D
)070000-7002(mho0 : TN)480000-7002(mhok7.4 : UE
PO_032R
DNUOS_YNA_ecivreS
TUPNI_1PMOC
LAP/TN rof llA ffutS toN
YNA_ecivreS
1TRACS
TUPNI_2PMOC
V05
702CFn01
mhoK74052RW01/1
TN_942Rmho001
752R
502CFp001
W01/1832R
mhoK1
Fp74722C
mho001
11-ET-B6.5ZLR112D
12
mho57442R
622Rmho57
212U
1
mhoK1602R
Fp001UE_622C
D20
2C
DS
3C30
GTH
1
0ohm
R27
0_N
T1/
10W
302U
3
4
5
6
402PT 1
PJ_802AJ
1
2
312U
1
HTG03C3SDC912D
712PT 1
Fn01812C
V05
W4/1mho74022R
W4/1
W01/1TN_502R
mho86
mho74722R
12
34
56
78
9
822CFp001
789
TN_602AJ
UJB
-05-
01A
718191
2
0212
3456
UE_202AJ
1
01112131415161
812R mho74 W4/1
CD
S3C
30G
THD
205_
EU
PJ_762R mho001
V05Fp51612C
mho0UE_062R
W01/1
932Rmho0
CD
S3C
30G
THD
222
W4/1
Fn01V05
902C
12
532R mho74
902R mhoK1
UE_522D11-ET-B6.5ZLR
612Rmho74
102AJ
1
2
3
4
5
6
012U1
652RmhoK1
UE_312Rmho74
Fp001UE_232C
mho001252R
mhoK81UE_852R
432PT1
mho57
Fp74332C
332PT1
712R
1
412PT
1
UE_202R mho001
912PT
112PT 1
602PT 1
132CFp001
432Rmho57
532PT
1
D22
7_E
UC
DS
3C30
GTH
W01/1mhoK1 212R
PJ_662R mho001
612PT 1
CD
S3C
30G
THD
203_
EU
11-ET-B6.5ZLRTN_022D
12
032PT
1
302PT 1
mho57UE_922R
HTG03C3SDC612D
W01/1UE_102R mhoK74
262R mho74
U20
8
1
mho0PO_032R
V05
mhoK086
PJ_862R
Fn01122C
HTG03C3SDC802D
W01/1
1
012DHTG03C3SDC
902DHTG03C3SDC
902U
702U1
D21
3_E
UC
DS
3C30
GTH
812PT 1
mho0
332R512C
Fn01V05
Fp001402C
1
mhoK1702R
V05
112C
132PT
Fp001
Fp51
922CFp001
032C
012R mhoK1
342R
CD
S3C
30G
THD
226
PJ_162R
mho001
mhoK1
mho0TN_842R
822PT
1
HTG03C3SDC812D
W01/1042R
mho001
512PT 1
322PT 1
Fp001202C
W4/1mho74522R
Fp001602C
512R
HTG03C3SDCUE_712D
212PT 1
mhoK81mho001 W01/14
5
6
7
8
9
822R
1
302AJ
1
2
3
CD
S3C
30G
TH
112U
W4/1732Rmho74
D22
3
UE_702D
12
102U1
122PT 1
602U1
402AJ
1
23
45
67
UE_802RmhoK1
1
CD
S3C
30G
THD
201
PJ_822D
12
902PT012PT 1
11-ET-B6.5ZLR
mhoK74152RW01/1
ACCV_V5B
E
BC
102PT 1
BC
202QY-3261CSK
Y-3261CSK602Q E
Fp51V05
712C
802PT 1
V05212CFn01
352R mhoK1
402U1
RLZ
5.6B
-TE
-11
D23
0
12
912Rmho57
Fn01V05
912C
mho74142R
422PT
1
CD
S3C
30G
THD
224
mho57UE_242R
W01/1mho086
PJ_962R
462Rmho57
D20
6C
DS
3C30
GTH
422R
mhoK1
mho57
232PT1
552R
W01/1
Fp51V05
012C
D20
4C
DS
3C30
GTH
mho033PJ_562R
Fn01 V05022C
1
202U1
Fn01802C
202PT
V05
722PT 1
642R mho001
PJ_922D11-ET-B6.5ZLR
12
412DHTG03C3SDC
Fn7.4522CV05
Fn01412C
V05
D22
1C
DS
3C30
GTH
7
8
9
1DNGM
2DNGM
1
01
11
21
31
41
2
3
4
5
6
1
PJ_902AJ
mho001232R
W01/1
022PT
mho0132R
W01/1
W01/1
mho0222R
2
0212
345678901112131415161718191
BC
UE_702AJ
1
1
Y-3261CSK302Q
E
Fn01312C
222PT
522PT 1 V05
1
2
3
4
5
6
1
622PT 1
502AJ
W01/1mho001
502PT
922PT1
322R
PJ_432CFn001
UE_102CFp001
952R mho001
UE_302CFp001
Fp51322C
V05
mhoK74 W01/1UE_302R
EB
C
422C
502QY-3261CSK
632R
V05Fn01
mho0PO_362R
mho57
312PT
1
512DHTG03C3SDC
122R W01/1mho001
UE_402R mho001
742R mho001
CD
S3C
30G
THD
212
TN_102NCD10-50-BJU
1
2
3
4
5
6
7
mho001
mhoK1
412R
702PT 1UE_112R
1
542R mho001
Fp51222C
502U
NI_DNGA
1VA_TNEDI
NI_DNGA
NI_DNGA
V05
NI_DNGA
NI_DNGA
NI_DNGA
NI_DNGA
TUO_LS_2CS_YNA
SBVC_1VA_2CS
NI_LS_1VA_2CS
TUO_RS_2CS_YNA
NI_RS_1VA_2CS
TN_GOS_2PMOC_G_1CS
ORP_2CS
NI_DNGA
NI_DNGA
NI_DNGA
NI_DNGA
DI_3TNOC_4D_2CS
TUO_SBVC_VA_2CS
DNG_RP_1PMOC
rP_1PMOC_VTD
DNG_BP_1PMOC
bP_1PMOC_VTD
DNG_Y_1PMOC
Y_1PMOC_VTD
AV
1_C
VB
S
NI_DNGA
TCETORP_1CS
TUO_LS_1CS
TUO_RS_1CS
NI_DNGA
NI_DNGANI_DNGA
NI_DNGA
NI_DNGA
NI_DNGA
DNG_BP_2PMOC_B_1CS
BP_2PMOC_B_1CS
BF_1CS
GOS_1PMOC
1PMOC_TNEDI
NI_DNGA
XT_YNA_ECIVRES
XR_YNA_ECIVRES
NI_DNGA NI_DNGA
DNG_Y_2PMOC_G_1CS
Y_2PMOC_G_1CS
DNG_RP_2PMOC_R_1CS
RP_2PMOC_R_1CS
NI_DNGA
NI_DNGA
NI_RS_1PMOC
NI_LS_1PMOC
NI_DNGA
NI_DNGA
4D_TNEDI
NI_DNGA NI_DNGA NI_DNGA
DI_4D
NI_DNGA
NI_RS_2PMOC_1CS
NI_LS_2PMOC_1CS
DI_1TNOC_4D_1CS
TUO_SBVC_1CS
NI_DNGA
NI_DNGA
NI_DNGA
NI_SBVC_1CS
2PMOC_TNEDI
NI_DNGA
NI_DNGA
NI_DNGA
This Document can not be used without Samsung’s authorization.
7-2-2 INPUT_JACK1
PowerVideoAudio
Samsung Electronics
Schematic Diagram
7-5
YE
LLO
WR
ED
WH
ITE
GN
D
NI_S_CP
TN_602AJ
PDP&"64DCLO
TN_102NC
O
L_403NC
VA_EDIS
O
NI_CP
TUPNI OEDIVS_EDIS
TUPNI VA_EDIS
O
160100-2273
PH_EDIS
L_303NC
LAP O
O
O
ODCL
PO_103NC
TN
L_203NC
UE_702AJUE_202AJ
O
PJ_902AJ
napaJ
PJ_802AJ
1
943Rmho57
W01/1
453Rmho001
mho0L_603R
763R mho74
653Rmho57
793R
L_133R mho0
L_503C
mhoK1
803PT1
Fp033
573R mhoK7.4
789
mho0L_233R
101
11
2
3
456
L_403NC010-10-5809QHS
313PT
1
Fp74
L_103CV05
ADS_CP
1
Fn01223C
V05
513PT1
503PT1
mhoK01263R
183R mhoK7.4
553Rmho74
W4/1
mho001W01/1
753R
W01/1
773RmhoK2
mhoK1963R
CD
S3C
30G
THD
310_
L
11-ET-B6.5ZLR
12
1
913PT 1
433D
203PT
D32
1_L
12
L_223R mhoK1
W01/1mhoK2873R
mho57
W01/1643R mho021
303PT1
353R
213PT1
EBC
mho021743RW01/1
4031DTK203Q
693RmhoK1
073R
V05
613CFn01
LCS_CP
1
mho015
CD
S3C
30G
THD
325
703PT1
CD
S3C
30G
THD
322_
L
MG
ND
2
mhoK7.4673R
41
51
2
3
4
5
6
7
8
9
MG
ND
1
033N20251-501
1
01
11
21
31
mho001
603AJ
W01/1
L_623R
11-ET-B6.5ZLRL_603D
12
mho001053R
1
423PT 1
CD
S3C
30G
THD
338
903PT
103PT1
Fp033L_013C
L_033R mho0
12
103U1
L_703D
Fn01V05
913C
283R mhoK7.4
223PT 1
L_013Rmho57
D33
0C
DS
3C30
GTH
D32
3_L
CD
S3C
30G
TH
41
23456789
PO_103NC41-81002WF
1
01112131
1
12
mho22473R
Fp7.4
11-ET-B6.5ZLR133D
L_433R
813C
V05
363R
mho57
V05
mhoK01
mho001
023CFn01
Fp5823C
273R
313C
V05Fn01
Fp033L_213C
Fp033523C
D30
9_L
CD
S3C
30G
TH
mho57L_903R
11-ET-B6.5ZLR
12
1
533D
8
9
Fp033L_403C
1
2
3
4
5
6
7
W01/1093R mho001
5410-30ACGL_303NC
11-ET-B6.5ZLR333D
12
CD
S3C
30G
THD
329
1
9061U
1
323PT 1
113U
Fp001923C
1
L_203R
153Rmho74
W4/1
Fn01V05
mho74
11
513C
113PT1
Fp74
L_303CV05
1
403PT
1
mho74843R
W4/1
L_703R mho0
mho74593R W01/1
W01/1983R mho74
323CFu01
V61
1
723CFp5
0E21E3
2E
SSV4
ADS56
LCSCW/,EDOM
78
CCV
203CI
CS01-N20C42TA
1
EB
C
D32
4C
DS
3C30
GTH
103Q4031DTK
1
293R mho074
123PT
013PT1
mho021483RW01/1
mho074193R
Fp033623C
253Rmho74
CD
S3C
30G
THD
328
203U1
423CFn001
12
mho001L_923R
233D11-ET-B6.5ZLR
W01/1
CD
S3C
30G
THD
303_
L
mho001783R
V05
413CFp7.4
863R mhoK1
383R mhoK7.4
V05
713CFn7.4
L_333R mho0
CD
S3C
30G
THD
308_
L
W01/1583R mho021
1
mho001543R
U31
0
D33
9C
DS
3C30
GTH
mhoK7.4973R
603PT
1
CCV_CDD
L_113CFp033
393R mho001W01/1493R mho74
563R
W01/1
mho0L_803R
mho74
mho22
413PT1
663R
mho001L_303R
L_523R mhoK1
CD
S3C
30G
TH V05L_203C
Fp74
0161U
1
D30
2_L
mho74883RW01/1
W01/1683R mho74
3
45
67
mhoK7.4083R
1
JA30
7
1
2
023PT 1
78
9
1
1
0111
2 34 5
6
mhoK7.4373R
100-GA-JSUL_203NC
23456789
B_503NC
1
0111213141
803U1
A3.3VD_TM
L_103R mho74
123C
V05Fp7.4
PH_TNEDI
173R mho015
NI_DNGA
TCETORP_2CS
NI_DNGA
NI_DNGA
NI_DNGA
SBVC_2VA
C_EDIS_2VA
Y_EDIS_2VASHVS_EDIS_TNEDI
VA_EDIS_TNEDI
NI_DNGA
DNG_NRG_CP
NI_DNGA
NI_DNGANI_DNGA
NI_RS_VA_EDIS
NI_LS_VA_EDIS
SBVC_2VA
VA_EDIS_TNEDI
NI_DNGA
NI_LS_VA_EDISNI_RS_VA_EDIS CP_TNEDI
1PMOC_TNEDI2PMOC_TNEDI
GOS_CP
NI_DNGA
NI_DNGA
NI_DNGA
L_TUO_PH
R_TUO_PH
CNYS_V_CP
NI_DNGA
CNYS_H_CP
NI_DNGANI_DNGA
DNG_DER_CP
DER_CP
NRG_CP
ULB_CP
DNG_ULB_CP
4D_TNEDIPH_TNEDI
1VA_TNEDI
VA_EDIS_TNEDI
SHVS_EDIS_TNEDI
CP_TNEDI
NI_DNGA
V5_CP
NI_DNGA
NI_DNGA
NI_DNGA
NI_RS_CP
NI_LS_CP
NI_DNGDNI_DNGA
NI_DNGA
NI_DNGA DNGRENUT
Y_EDIS_2VA
C_EDIS_2VA
SHVS_EDIS_TNEDI
PH_TNEDI
NI_DNGANI_DNGA
NI_DNGA
NI_DNGA
PW_CDD
This Document can not be used without Samsung’s authorization.
7-2-3 INPUT_JACK2
PowerVideoAudio
Schematic Diagram
7-6 Samsung Electronics
RE
DW
HIT
E
CECCEC
NI_S_IVD
TUPNI_1IMDH TUPNI_2IMDH
WOL HGIH IMDH_LES1IMDH 2IMDH TUPTUO
HCTIWS IMDH124CFn001
45
67
89
1213
1415
1617
1819
23
BBW910R1CD204AJ
110
11
0E1
1E 2
2E34
SSV5
ADS
LCS67
CW/,EDOM
CCV8
FERX
CS01-N20C42TA104CI
mho0074R
104DB
W01/1714R mho74
1
A003S2102ZPM
Y-3261CSKE
BC
404PT
204PT
1
CCV_CDD
204Q
604U1
204RmhoK01
654R mho0
604R
mho0454R
304PT
1
mho74
304D
3060101BGP
304RmhoK01
FERX
mhoK8.1564R
mho72884R
W01/1
704DC45TAB
304CFn001
mhoK74904R 014R
mhoK74
514CFu01
Fp001114C
V05
104U1
CCV_CDD
IMDH_DV3.3B
464R mho0
ACCV_V5B
CD
S3C
30G
THD
409
224C Fn001
Fn001524C
21E3
2E
SSV4
ADS56
LCSCW/,EDOM
78
CCV
404U1
204CICS01-N20C42TA
10E
614R
204D
mhoK01
mhoK5.1664R
B2.6ZLR
504U1
FERX
Fp033714C
mho0264R
Fn001414C
Fn001324C
204C
IMDH_DV3.3B
104R
Fu01V61
514RmhoK01
mhoK01
mho74
Fn001704C
804R104Q E
BC
354R
Y-3261CSK
mho74
mhoK1
mhoK1214R
W01/1
W01/1024R
Fp033
1_V5A
424C Fn001
614C
CCV_CDD2
34
56
78
91
1011
1213
1415
1617
1819
1
104AJBBW910R1CD
804PT 1
904PT
964R mho0
1
3060101BGP
504D
mho0
504PT
604D
124R
FERX
304U1
FERX104CV61Fu01
804CFu01
D41
0C
DS
3C30
GTH
204U1
mho0764R
404D
864R mho0
mho74914R W01/1
mho0854R
mho0364R
FERX
174R mho0
mho0374R
mho0274R
814CFn001
W01/1
114RmhoK1
5
6
Fn001404C
304AJ
1
2
3
4
104DB2.6ZLR
mho74mho74704R
704PT1
504R
mhoK7.4064RW01/1
W01/1mhoK1414R
FERX
804D481SDK
624C Fn001
754R mho0
mho0224R
E
BC
FERX
Fn001024C
404R
Y-3261CSK404Q
mhoK01
W01/1
Fn001914C
314R mhoK1
114PT
1
164R mho0
FERX
014PT 1 604PT
1
mho001784RW01/1
484R
FERX
474R mho0
mhoK1
mho74814R W01/1
684R
104PT
1
mhoK1
-1XR_2IMDH
+0XR_2IMDH
-0XR_2IMDH
NI_DNGD
PW_CDD
NI_DNGD
+KLCXR_1IMDH
+2XR_1IMDH +2XR_2IMDH
+KLCXR_2IMDH
-KLCXR_2IMDH
B_V5_IMDH
-2XR_2IMDH
+1XR_2IMDH
LCS_CDD_2IMDH
NI_DNGD
NI_DNGD
-0XR_1IMDH
+0XR_1IMDH
-1XR_1IMDH
+1XR_1IMDH
-2XR_1IMDH
-KLCXR_1IMDH
LCS_CDD_1IMDH
+0XR_2D
-2XR_1IMDH
-0XR_1IMDH
-0XR_2IMDH
-2XR_2IMDH
IMDH_LES
LCS_CDD_2IMDHADS_CDD_1IMDH
ADS_CDD_1IMDHLCS_CDD_1IMDH
NI_DNGD
ADS_CDD_2IMDH
A_V5_IMDH
LCS_CDD_2D
ADS_CDD_2D
+1XR_2D
-0XR_2D
+2XR_2D
-KLCXR_2D+KLCXR_2D
-2XR_2D
-1XR_2D
PW_CDD
V5_CP
A_V5_IMDH
DNGD
B_V5_IMDH
NI_DNGD
CEC_IMDH
NI_DNGD
B_IMDH_TNEDI
NI_DNGDNI_DNGD
B_GULP_TOH_IMDH
PW_CDD
ADS_CDD_2IMDH
-KLCXR_1IMDH+KLCXR_1IMDH
+0XR_1IMDH-1XR_1IMDH+1XR_1IMDH
+2XR_1IMDH
-KLCXR_2IMDH+KLCXR_2IMDH
+0XR_2IMDH-1XR_2IMDH+1XR_2IMDH
+2XR_2IMDH
2028_PW_CDD
NI_DNGD
A_IMDH_TNEDI
NI_DNGD
A_GULP_TOH_IMDH
NI_DNGA
NI_LS_IVD
NI_RS_IVD
NI_DNGANI_DNGA
NI_DNGD
This Document can not be used without Samsung’s authorization.
7-2-4 INPUT_JACK3
PowerVideoAudio
Samsung Electronics
Schematic Diagram
7-7
noitpO tracS
gubeD pihC C2I
LAP @ LAP** ,TN @ TN** ffutS
)BCP fo edisni eb t’noD(ylno ymmuD tnemecalp rof si 105NC
Notice- Be sure to separate the power cord before disassembling the unit.- Discharge the capacitors first when separating PCB's with high capacity capacitors such as SMPS, X Main Board, Y Main
Board, etc. (A spark may be generated by the electric charge, and there is danger of electronic shock.)- Check that the cables are properly connected referring to the circuit diagram when disassembling or assembling the unit
taking care not to damage the cables.- Take care not to scratch the Glass Filter in the front.- Assemble the boards in the reverse order of the disassembly.- The plasma must be layed down on a flat padded surface for disassembly and reassembly.
3-1-2 Separation of ASSY PCB MISC-MAINPart Name Description Description Photo
MainBoard
① Detach all connectors from the Main Board.
② Remove 4 screws.: PH,+,WWP,M3,L8,NI PLT
③ Remove the Main Board.
Disassembly & Reassembly
3-2 Samsung Electronics
3-1-3 Separation of FILTER-EMI AC LINEPart Name Description Description PhotoFILTER-
EMIAC LINE
① Detach connector from Main SMPS.
② Remove 2 screws. ( ) : PH,+,WWP,M3,L8,NI PLT
③ Remove a screw. ( ): BH,+,S,M4,L10,ZPC(BLK)
④ Remove FILTER-EMI AC LINE.
3-1-4 Separation of BRACKET-PCBPart Name Description Description Photo
BracketPCB
① Remove a screw.: BH,+,S,M4,L10,ZPC(BLK)
② Remove the BRACKET-PCB.
Disassembly & Reassembly
Samsung Electronics 3-3
3-1-5 Separation of ASSY BRACKETPart Name Description Description Photo
42"Bracket
① Remove 4 screws. ( ) : BH,+,S,M4,L10,ZPC(BLK)
② Remove 2 screws. ( ) : BH,+,B,M4,L3,ZPC(BLK)
③ Remove Bracket.
50"Bracket
① Remove 4 screws. ( ) : BH,+,S,M4,L10,ZPC(BLK)
② Remove 2 screws. ( ) : BH,+,B,M4,L3,ZPC(BLK)
③ Remove Bracket.
3-1-6 Separation of ASSY BOARD P-SIDE AVPart Name Description Description Photo
Side AV ① Remove a screw. ( ) : BH,+,B,M4,L3,ZPC(BLK)
② Remove a screw. ( ) : BH,+,S,M4,L10,ZPC(BLK)
③ Remove the Side AV.
Disassembly & Reassembly
3-4 Samsung Electronics
3-1-7 Separation of ASSY BRACKET P-WALLPart Name Description Description Photo
42"Wall
Bracket
① Remove 2 screws. ( ): BH,+,B,M4,L3,ZPC(BLK)
② Remove 6 screws. ( ): BH,+,S,M4,L10,ZPC(BLK)
③ Remove Wall Bracket.
: Please lay the PDP panel face down on a soft surface when separating front cover.
50"Wall
Bracket
① Remove 2 screws. ( ): BH,+,B,M4,L3,ZPC(BLK)
② Remove 6 screws. ( ): BH,+,S,M4,L10,ZPC(BLK)
③ Remove Wall Bracket.
: Please lay the PDP panel face down ona soft surface when separating front cover.
Disassembly & Reassembly
Samsung Electronics 3-5
3-1-8 Separation of ASSY SPEAKER PPart Name Description Description Photo
42"Speaker
① Remove 4 screws.: BH,+,WP,B,M4.0,L3,ZPC(BLK),
SWRCH18A
② Remove the Speaker.
50"Speaker
① Remove 4 screws.: BH,+,WP,B,M4.0,L3,ZPC(BLK),
SWRCH18A
② Remove the Speaker.
3-1-9 Separation of ASSY BOARD P-POWER&IRPart Name Description Description Photo
Power&
IR Board
① Detach all connectors from the Power&IR Board.
② Remove the Power&IR PCB unlocking the 2 holders.
Disassembly & Reassembly
3-6 Samsung Electronics
3-1-10 Separation of SMPS-PDP TVPart Name Description Description Photo
42"SMPS
① Detach all connectors from the SMPS.
② Remove 8 screws.: PH,+,WWP,M3,L8,NI PLT
③ Remove the SMPS.
: Wear gloves when handling the powerboard as there may be some remaining electrical charge in the capacitor. Specifically, avoid touching any part of the capacitor.
50"SMPS
① Detach all connectors from the SMPS.
② Remove 8 screws.: PH,+,WWP,M3,L8,NI PLT
③ Remove the SMPS.
: Wear gloves when handling the powerboard as there may be some remaining electrical charge in the capacitor. Specifically, avoid touching any part of the capacitor.
Disassembly & Reassembly
Samsung Electronics 3-7
3-1-11 Separation of ASSY PDP MODULE P-LOGIC MAIN BOARDPart Name Description Description Photo
42"LogicBoard
① Detach all connectors from the Logic Main Board.
② Remove 4 screws.: WSP,PH,+,M3,L8,NI PLT
③ Remove the Logic Main Board.
50"LogicBoard
① Detach all connectors from the Logic Main Board.
② Remove 4 screws.: WSP,PH,+,M3,L8,NI PLT
③ Remove the Logic Main Board.
Disassembly & Reassembly
3-8 Samsung Electronics
3-1-12 Separation of ASSY PDP MODULE P-X MAIN BOARDPart Name Description Description PhotoFlat Cable ① Detach all Connectors from the X Main
Board.
※ To separate the Flat Cable of the X-Board, press the upper and the lower sides of the connector.
42"X-MainBoard
① Remove 4 screws.: PH,+,WWP,M3,L8,NI PLT
② Remove the X-Main Board.
50"X-MainBoard
① Remove 4 screws.: PH,+,WWP,M3,L8,NI PLT
② Remove the X-Main Board.
Disassembly & Reassembly
Samsung Electronics 3-9
3-1-13 Separation of ASSY PDP MODULE P-Y MAIN BOARDPart Name Description Description PhotoFlat Cable ① Detach the 6 scan board connectors
from the panel by pulling the holder from both the top and bottom ends.
42"Y-ScanBoard
① Remove 3 screws.: PH,+,WWP,M3,L8,NI PLT
50"Y-ScanBoard
① Remove 5 screws.: PH,+,WWP,M3,L8,NI PLT
Disassembly & Reassembly
3-10 Samsung Electronics
Part Name Description Description Photo42"
Y-MainBoard
① Remove 4 screws.: PH,+,WWP,M3,L8,NI PLT
② Detach all connectors from the Y-MainBoard.
50"Y-MainBoard
① Remove 4 screws.: PH,+,WWP,M3,L8,NI PLT
② Detach all connectors from the Y-MainBoard.
Disassembly & Reassembly
Samsung Electronics 3-11
3-1-14 Separation of ASSY PDP MODULE P-ADDRESS BUFFER BOARDPart Name Description Description Photo
42"Still Bar
① Remove 4 screws.: PH,+,WWP,M3,L8,NI PLT
② Remove the still bar.
50"Still Bar
① Remove 4 screws.: PH,+,WWP,M3,L8,NI PLT
② Remove the still bar.
42"BufferBoard
① Detach the all connectors from the buffer board.
② Remove 3 screws.: PH,+,WWP,M3,L8,NI PLT
③ Remove the E-Board and F-Board.
50"BufferBoard
① Detach the all connectors from the buffer board.
② Remove 14 screws.: PH,+,WWP,M3,L8,NI PLT
③ Remove the E-Board and F-Board.
3-1-16 Separation of ASSY PCB FUNCTIONPart Name Description Description PhotoFunction
Board① Remove 2 screws.
: BH,+,B,M4,L3,ZPC(BLK)
② Remove the Function Board.
Disassembly & Reassembly
3-12 Samsung Electronics
3-1-15 Separation of ASSY PANEL BRACKETSPart Name Description Description Photo
PanelBrackets
① Remove 3 screws. ( ) : BH,+,B,M4,L3,ZPC(BLK)
② Remove 4 screws. ( ) : BH,+,S,M4,L10,ZPC(BLK)
③ Remove the Side Panel Brackets.
1. Make sure all protective devices are properly installedincluding non-metallic handles and compartment coverswhen installing or re-installing the chassis or chassisassemblies.
2. Make sure that no gaps exist between the cabinets forchildren to insert their fingers in to prevent children fromreceiving electric shocks. Gaps mentioned above includeventilation holes between the PDP module and the cabi-net mask, and the improper installation of the rear cabi-net.
Errors may occur when the resistance is below 1.0 ㏁ orover 5.2 ㏁.In these cases, make sure that the device is repairedbefore sending it back to the customer.
3. Check for Electricity Leakage (Figure 1-1)Warning: Do not use an insulated transformer for check-ing the leakage. Use only those current leakage testersor mirroring systems that comply with ANSIC 101.1 andthe Underwriter Laboratory's specifications (UL1410,59.7).
Fig. 1-1 AC Leakage Test
4. A high voltage is maintained within the specified limitsusing safety parts, calibration and tolerances. When voltage exceeds the specified limits, check each specialpart.
5. Warning for Engineering Changes:Never make any changes or additions to the circuitdesign or the internal part for this product.Ex: Do not add any audio or video accessoryconnectors. This might cause physical damage.Furthermore, any changes or additions to the originaldesign/engineering will invalidate the warranty.
6. Warning - Hot Chassis:Some TV chassis are directly connected to one end ofthe AC power cord for electrical reasons.Without insulated transformers, the product can only berepaired safely when the chassis is connected to theearth end of the AC power source.
To make sure the AC power cord is properly connected,follow the instructions below. Use the voltmeter tomeasure the voltage between the chassis and theearth ground. If the measurement is over 1.0V, unplugthe AC power cord and change the polarity before re-inserting it. Measure the voltage between the chassisand the ground again.
7. Some TV chassis are shipped with an additional sec-ondary grounding system. The secondary system isadjacent to the AC power line. These two groundingsystems are separated in the circuit using an unbreak-able/unchangeable insulation material.
8. When any parts, material or wiring appear overheated ordamaged, replace them with new immediately. Whenany damage or overheating is detected, correct thisimmediately and make a regular check of possibleerrors.
9. Check for the original shape of the lead, especially thatof the antenna wiring, any sharp edges, the AC powerand the high voltage power. Carefully check if the wiringis too tight, incorrectly placed or loose. Never change thespace between the part and the printed circuit board.Check the AC power cord for possible damages. Keepthe part or the lead away from any heat-emittingmaterials.
Precaution
Samsung Electronics 1-1
LEAKAGECURRENTTESTER
DEVICEUNDERTEST
TEST ALLEXPOSED METAL
SURFACES
2-WIRE CORD
ALSO TEST WITHPLUG REVERSED
(USING AC ADAPTERPLUG AS REQUIRED)
EARTHGROUND
(READING SHOULDNOT BE ABOVE
0.5mA)
To avoid possible damage, electric shocks or exposure to radiation, follow the instructions below with regard to safety, installa-tion, service and ESD.
1. Precaution
1-1 Safety Precautions
10. Safety Indication:Some electrical circuits or device related materialsrequire special attention to their safety features, whichcannot be viewed by the naked eye. If an original part isreplaced with another irregular one, the safety orprotective features will be lost even if the new one has ahigher voltage or more watts.
Critical safety parts should be bracketed with ( ).Use only regular parts for replacements (in particular,flame resistance and dielectric strength specifications).Irregular parts or materials may cause electric shock orfire.
Precaution
1-2 Samsung Electronics
!
1. The service instructions are printed on the cabinet, andshould be followed by any service personnel.
2. Make sure to unplug the AC power cord from the powersource before starting any repairs.(a) Remove or re-install parts or assemblies.(b) Disconnect the electric plug or connector, if any.(c) Connect the test part in parallel with the electrolyticcapacitor.
3. Some parts are placed at a higher position than theprinted board. Insulated tubes or tapes are used for thispurpose. The internal wiring is clamped using buckles toavoid contact with heat emitting parts. These parts areinstalled back to their original position.
4. After the repair, make sure to check if the screws, partsor cables are properly installed. Make sure no damage iscaused to the repaired part and its surroundings.
5. Check for insulation between the blade of the AC plugand that of any conductive materials (i.e. the metalpanel, input terminal, earphone jack, etc).
6. Insulation Check Process: Unplug the power cord fromthe AC source and turn the switch on. Connect the insu-lating resistance meter (500v) to the AC plug blade.
The insulating resistance between the blade of the ACplug and that of the conductive material should be morethan 1 ㏁.
7. Any B+ interlock should not be damaged.If the metal heat sink is not properly installed, noconnection to the AC power should be made.
8. Make sure the grounding lead of the tester is connectedto the chassis ground before connecting to the positivelead. The ground lead of the tester should be removedlast.
9. Beware of risks of any current leakage coming intocontact with the high-capacity capacitor.
10. The sharp edges of the metal material may causephysical damage, so protect yourself by wearing glovesduring the repair.
11. Due to the nature of plasma display panels, partial after-images may appear if a still picture is displayed on thescreen for a long period of time.This is caused by brightness deterioration due to thestorage effect of the panel, and to prevent this fromhappening, we recommend that the brightness and con-trast are reduced.(e.g.) Contrast: 25, Brightness: 50
Precaution
Samsung Electronics 1-3
Warning 1: First carefully read the "Safety Instruction" in this service manual.When there is a conflict between the service and the safety instructions, follow the safety instruction at all times.
Warning 2: Any electrolytic capacitor with the wrong polarity will explode.
1-2 Servicing Precautions
1-3 Static Electricity Precautions1. Some semi-conductive ("solid state") devices are
vulnerable to static electricity. These devices are knownas ESD. ESD includes the integrated circuit and the fieldeffect transistor. To avoid any materials damage fromelectrostatic shock, follow the instructions describedbelow.
2. Remove any static electricity from your body byconnecting the earth ground before handling anysemi-conductive parts or assemblies. Alternatively, wear a dischargeable wrist-belt.(Make sure to remove any static electricity beforeconnecting the power source - this is a safety instructionfor avoiding electric shock)
3. Remove the ESD assembly and place it on a conductivesurface such as aluminum foil to prevent accumulatingstatic electricity.
4. Do not use any Freon-based chemicals.Such chemicals will generate static electricity thatcauses damage to the ESD.
5. Use only grounded-tip irons for soldering purposes.
6. Use only anti-static solder removal devices.Most solder removal devices do not support ananti-static feature. A solder removal device without ananti-static feature can store enough static electricity tocause damage to the ESD.
7. Do not remove the ESD from the protective box until thereplacement is ready. Most ESD replacements arecovered with lead, which will cause a short to the entireunit due to the conductive foam, aluminum foil or otherconductive materials.
8. Remove the protective material from the ESDreplacement lead immediately after connecting it to thechassis or circuit assembly.
9. Take extreme caution in handling any uncovered ESDreplacements. Actions such as brushing clothes or liftingyour leg from the carpet floor can generate enough staticelectricity to damage the ESD.
Precaution
1-4 Samsung Electronics
CAUTION
These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in theoperating instructions unless you are qualified to do so.
Precaution
Samsung Electronics 1-5
1-4 Installation Precautions1. For safety reasons, more than two people are required
for carrying the product.
2. Keep the power cord away from any heat emittingdevices, as a melted covering may cause fire or electricshock.
3. Do not place the product in areas with poor ventilationsuch as a bookshelf or closet. The increased internaltemperature may cause fire.
4. Bend the external antenna cable when connecting it tothe product. This is a measure to protect it from beingexposed to moisture. Otherwise, it may cause a fire orelectric shock.
5. Make sure to turn the power off and unplug the powercord from the outlet before repositioning the product.Also check the antenna cable or the external connectorsif they are fully unplugged. Damage to the cord maycause fire or electric shock.
6. Keep the antenna far away from any high-voltage cablesand install it firmly. Contact with the high-voltage cable orthe antenna falling over may cause fire or electric shock.
7. When connecting the RF antenna, check for a DTVreceiving system and install a separate DTV receptionantenna for areas with no DTV signal.
8. When installing the product, leave enough space (4")between the product and the wall for ventilationpurposes.A rise in temperature within the product may cause fire.
9. When moving a PDP with removable speakers, detachthe speakers first before moving the main body.Moving the PDP main body without separating thespeakers may cause the speakers to detach, possiblycausing damage or injury.
1-6 Samsung Electronics
MEMO
Troubleshooting
Samsung Electronics 4-1
4-1-1 First Checklist for Troubleshooting
1. Check the various cable connections first.- Check to see if there is a burnt or damaged cable. - Check to see if there is a disconnected or loose cable connection.- Check to see if the cables are connected according to the connection diagram.
2. Check the power input to the Main Board.
3. Check the voltage in and out between the SMPS ↔ Main Board, between the SMPS ↔ X, Y Main Board, and between the Logic Boards.
4. Troubleshooting4-1 Troubleshooting
Troubleshooting
4-2 Samsung Electronics
4-1-2 Checkpoints by Error Mode
■■ No Power
Symptom- The LEDs on the front panel do not work when connecting the power cord.- The SMPS relay does not work when connecting the power cord.- The unit appears to be dead.
Major Checklist
The SMPS relay or the LEDs on the front panel does not work when connecting the power cord if the cablesare improperly connected or the Main Board or SMPS is not functioning. In this case, check the following:- Check the internal cable connection.- Check the fuses.- Check the output voltages of the SMPS.- Replace the Main Board.
TroubleshootingProcedures
Is the AC IN socket connector andthe SMPS CN800 connected?
Insert the AC in connector and theSMPS CN800 connector
Is the Fuse (F801S) of the SMPSPower Input Part blown? Replace Fuse (F801S)
Replace the SMPSSMPS CN801Pin 3 : STB 5V
Pin 2 PS-ON : Check to see if it is 0V
Replace the Main Board
①
①
②
Yes
No
Yes
No
No
Yes
Troubleshooting
Samsung Electronics 4-3
■■ When the unit is repeatedly turning on and offSymptom - The SMPS relay is repeatedly turning on and off.
Major Checklist
In general, the SMPS relay repeatedly turns on and off by the protection function due to a defect on a board connected to the SMPS.- Disconnect all cables from the SMPS, operate the SMPS alone and check if the SMPS works properly and if
each voltage output is correct.- If the symptom continues even when SMPS is operated alone, replace the SMPS.- If the symptom is not observed when operating the SMPS alone, find any defective assemblies by connecting
the cables one by one.
TroubleshootingProcedures
Caution
WHEN SEPARATING AND CONNECTING THE CABLES SUCH AS CN810, CN809, CN808, CN807 OF THEMAIN SMPS, CN4701 OF THE X MAIN BOARD, AND CN5707 OF THE Y MAIN BOARD, A SPARK MAY BEGENERATED BY THE ELECTRIC CHARGE OF THE HIGH CAPACITY CAPACITOR. THEREFORE, WAITSOME TIME AFTER DISCONNECTING THE POWER CORD FROM THE UNIT.
Does the symptom continue whenconnecting the power after removing
CN810 from the SMPS?
Replace the Y Main Board
Does the symptom continue whenconnecting the power after removing
CN809 from the SMPS?Replace the X Main Board
Replace the Logic BoardDoes the symptom continue when
connecting the power after removingCN807 from the SMPS?
Replace the SMPS
①
②
③
Yes
No
No
No
Yes
Yes
Troubleshooting
4-4 Samsung Electronics
■■ No Picture (When audio is normal)Symptom - Audio is normal but no picture is displayed on the screen.
Major Checklist
- This may happen when the Main Board is functioning but the X, Y Main Board, Logic Board, or Y Buffer Boards are not.
- The output voltage of the Main SMPS.- This may happen when the LVDS cable connecting the Main Board and the Logic Board is disconnected.
TroubleshootingProcedures
Caution
WHEN SEPARATING AND CONNECTING THE CABLES SUCH AS CN810, CN809, CN808, CN807 OF THEMAIN SMPS, CN4701 OF THE X MAIN BOARD, AND CN5707 OF THE Y MAIN BOARD, A SPARK MAY BEGENERATED BY THE ELECTRIC CHARGE OF THE HIGH CAPACITY CAPACITOR. THEREFORE, WAITSOME TIME AFTER DISCONNECTING THE POWER CORD FROM THE UNIT.
CN810
CN809CN808
CN807
Are the Vs and Va voltages normal afterremoving all cables from the SMPS?
(CN810, CN809, CN808, CN807)
Replace the SMPS
Yes
No
Did problem improve?
Did problem improve?
Did problem improve?
Did problem improve?
Replace the Y Main Board
Replace the X Main Board
Replace the Logic Board
Replace the Y Scan Board
No
No
No
No
Yes
Yes
Yes
Troubleshooting
Samsung Electronics 4-5
■■ No SoundSymptom - Video is normal but there is no sound.
Major Checklist- When the speaker connectors are disconnected or damaged.- When the sound processing part of the Main Board is not functioning.- Speaker defect.
TroubleshootingProcedures
Is the cable connection between theMain Board and the speaker
properly connected?
Connect the cable properly orreplace the cable, if necessary.
Is the output voltage of SMPS normal?(CN801 #13) Replace the SMPS
Replace the Main BoardIs the speaker output terminal
of the Main Board normal?
Replace the Speaker
①
②
③
Yes
No
No
No
Yes
Yes
Troubleshooting
4-6 Samsung Electronics
■■ No VideoSymptom - A normal/cable network analog broadcast screen is blank or abnormal but OSD is OK.
Major Checklist- Check the antenna connection settings (Air: NTSC / ATSC, Cable: NTSC)- Check the CVBS cable connection.- Check the power input of the Main board.
TroubleshootingProcedures
Is the antenna connection settingproperly configured? Configure properly
Replace the SMPSCheck CN101 pin2 for +33V
Replace the Main Board
①
No
No
Yes
Yes
Troubleshooting
Samsung Electronics 4-7
STD_5V
Normal
AbnormalCheck the U101, D108
PFC
Normal
AbnormalCheck the U201, Q203, Q204
VA
Multi
Check the U501
Abnormal
Abnormal
Check the U601
Normal
VS
Normal
AbnormalCheck the Q401, Q402
Check the Other board (Image Board or Driver Board) or Cable.
Power ON
■ SMPS Troubleshooting
Troubleshooting
4-8 Samsung Electronics
Condition Name Description Related BoardNo Voltage Output Operating Voltage don't exist PSUNo Display Operating Voltage exist, but an Image doesn't exist on screen Y-MAIN, X-MAIN, Logic Main, CableAbnormal Display Abnormal Image (not open or short) is no screen Y-MAIN, X-MAIN, Logic MainSustain Open Some horizontal lines don't exist on screen Scan Buffer, FPC of X/YSustain Short Some horizontal lines appear to be linked on screen Scan Buffer, FPC of X/YAddress Open Some vertical lines don't exist on screen Logic Main, Logic Buffer, TCPAddress Short Some vertical lines appear to be linked on screen Logic Main, Logic Buffer, TCP
■■ Drive Board Troubleshooting
1) Troubleshooting Summary
Troubleshooting
Samsung Electronics 4-9
No Display
[ Y-MAIN ]Check necessary points
[ Logic Main ]LED Blinks
[ X-MAIN ]Check necessary points
[ Logic Main ]Check if power is supplied
( 5V, 3.3V )
Check the LEDoperation
Check if internal isDefault Black
Check theMICOM operation
Check thepower connectivity
Check if any addressdata output is detected
Check the ASICControl Signal output
Check if the dataand control signals
between DDR & ASICare normal
If the input voltage isabnormal, replace the
PSU and check itagain as this indicates
a PSU output error
Check the FUSE
Check theinput voltage
YES NO
YES NO
[ Y-MAIN ]Check several points
FUSE
FET/DIODE
Y-MAINNormal State
Replace the Board
Replace the Board
OK
OPEN
SHORT
OK
F5001 for VDDF5002 for VsF5004 for VCCF5005 for OUT_L
Q5009~Q5021D5005, D5007D5008
[ X-MAIN ]Check several points
FUSE
FET/DIODE
X-MAINNormal State
Replace the Board
Replace the Board
OK
OPEN
SHORT
OK
F4001 for VCCF4002 for VsF4004 for VDDF4005 for Ve
Q4002~Q4003Q4011~Q4016D4004D4006~D4008
2) Troubleshooting Procedure in Abnormal Conditions① No Display▶ No Display is related with Y-MAIN, X-MAIN, Logic Main and so on.
This page shows you how to check the boards, and the following pages show you how to find the defective board.
Troubleshooting
4-10 Samsung Electronics
AbnormalDisplay
[ Y-MAIN ]Check necessary points
[ Logic Main ]Observation of
abnormal display
[ X-MAIN ]Check necessary points
[ Logic Main ]LED Blinks
( action of Vsync )
Regularabnormalpattern
Replace the Board
NO
YES
Logic MainNormal State
Replace Panel
[ Y-MAIN ]Check several points
FUSE
FET
Y-MAINNormal State
Replace the Board
Replace the Board
OK
OPEN
SHORT
OK
F5001 for VDDF5002 for VsF5004 for VCCF5005 for OUT_L
Q5009~Q5021
[ X-MAIN ]Check several points
FUSE
FET
X-MAINNormal State
Replace the Board
Replace the Board
OK
OPEN
SHORT
OK
F4001 for VCCF4002 for VsF4004 for VDDF4005 for Ve
Q4002~Q4003Q4011~Q4016
② Abnormal Display(Abnormal Image is on Screen.(except abnormality in Sustain or Address))▶ Abnormal Display is related with Y-MAIN, X-MAIN, Logic Main and so on.
This page shows you how to check the boards, and the following pages show you how to find the defective board.
Troubleshooting
Samsung Electronics 4-11
③ Sustain Open (some horizontal lines don't exist on screen)
[ Y-FPC ]Sustain Open
After Changing Y-buffer,recheck the status
Done(Defect is from Y-buffer)
Replace the PanelThere is a defect on the FPC
OK
NG
④ Sustain Short (some horizontal lines appear to be linked on Video)
[ Y-FPC ]Sustain Short
(Discharging in unwanted Scan line)
After Changing Y-buffer,recheck the status
Done(Defect is from Y-buffer)
OK
NG Replace the PanelThere is a defect on the FPC
Troubleshooting
4-12 Samsung Electronics
⑤ Address Open, Short▶ Address Open and Short is related with Logic Main, Logic Buffer, FFC, TCP film and so on.
This page shows you how to check the boards, and the following pages show you how to find the defective board.
[ Logic Main ]Address Open/Short
Check the LED operationLED2011 : blinkLED2010 : on
Check if the internal modescreen is normal
Reload the data onto theMICOM and recheck it
Check if there is an open orshort circuit on the Buffer Board
and the Logic Main addressdata output section.
Check the FFC connection status
Check the detailed waveformand control the signal waveform
OK
NG
OK
NG
Check if a specific TCP Blockscreen is displayed abnormally
OK
NG
OK
Replace Logic Main /Address Buffer (E or F) /
FFC
NG
DONE
Check theVideo Board
check the voltage ofU2650 pin1 is 3.3V
check the voltage ofC2901, C2902, C2903 is 1.25V
Replace the Panel
OK
NG
NG
Troubleshooting
Samsung Electronics 4-13
4-1-3 Faults and Corrective Actions
Symptom Related Image Causes and CountermeasuresA blank vertical cell (block)appears on the screen.
Address buffer defect- Replace the corresponding upper/lower
buffers (E, F)
COF defect (burnt)- Replace the module
A green screen appears whenthe TV is turned on.
The Scale is not reseting- Replace the Main board
The OSD box appears but thereis no text.
Incorrect program version- Check the version of each program- Replace the Main board
A blank upper (or lower) blockappears on the screen.
Upper/Lower Y Buffer defect- Replace the corresponding upper/lower
buffers (E, F)
Troubleshooting
4-14 Samsung Electronics
Symptom Related Image Causes and CountermeasuresEither the main or sub picturedoes not appear.
Replace the Main board
A vertical green line appears onthe screen.
The SMPS voltage is incorrect- Adjust the SMPS voltage according to
the voltage printed on the module label
Dim screen (blurred in red) X-Main board defect- Replace the X-Main board
A blank screen appears - Replace the Y-Main board
Troubleshooting
Samsung Electronics 4-15
4-1-4 Troubleshooting Procedures by assemblyNo Assembly Major Symptoms1 SMPS-PDP TV No power, Blank screen, the Relay repeats On and Off.2 ASSY PDP MODULE P-X-MAIN Blank screen3 ASSY PDP MODULE P-Y-MAIN Blank screen4 ASSY PDP MODULE P-LOGIC MAIN Blank screen, Screen noise5 ASSY PDP MODULE P-Y-MAIN SCAN BUFFER Row Bar screen is blank6 ASSY PDP MODULE P-ADDRESS E BUFFER Corresponding Buffer Board block screen is blank.7 ASSY PDP MODULE P-ADDRESS F BUFFER Corresponding Buffer Board block screen is blank.8 ASSY PCB MISC-MAIN No Power, Abnormal screen for each input source, PIP screen trouble, Sound trouble9 ASSY BOARD P-FUNCTION The side function key does not work properly
10 ASSY BOARD P-POWER&IR The remote control does not work properly, the LED does not work properly.11 ASSY BOARD P-SIDE AV The AV2 and S-VIDEO2 modes do not work properly
<PDP 42”> <PDP 50”>
Troubleshooting
4-16 Samsung Electronics
4-2 Adjustment
4-2-1 Service Instruction
■ Before Performing After Sales Services1. Check if the measurement and test equipment is working properly.2. Secure sufficient work space for disassembling the product.3. Prepare a soft pad for disassembling the product.
■ Service adjustment item after replacement of Board<If adjustment equipment is available>① PDP Option of Factory Mode → set the Factory Data Type item as the suitable value of relevant model. ② Adjust Calibration of Factory Mode for each mode.③ Adjust White Balance of Factory Mode.
<If adjustment equipment is not available>① Write down the value of HDMI White Balance of Factory Mode before replacing Board.② PDP Option of Factory Mode → set the Factory Data Type item as the suitable value of relevant model. ③ Set the value of HDMI White Balance with the value written down before.
Troubleshooting
Samsung Electronics 4-17
4-2-2 How to Access Service Mode
1. General Remote
To Enter: → → → →
(Interval between key strokes: less than 3 sec)
To Exit: →
2. Factory Remote
To Enter: → → → (Interval between key strokes: less than 3 sec)
To Exit: →Press the Factory key twice with a key stroke interval of more than 1 second (Pressing once enters Aging Mode)
3. Settings when entering Factory mode- Sharp Screen (Dynamic), Color Tone (Cool1), Factory (Dynamic CE Off)
4. Adjustment Procedures- Channel ▲▼ Key : Select an item.- Volume ◀▶ Key : Adjust the value up or down.- MENU Key : Save the changes to the EEPROM and return to the higher-level mode.- Using the Numeric (0~9) keys, you can select a channel.- Using the SOURCE key, you can switch AV modes.
5. Initial SERVICE MODE DISPLAY State
※ The version of the firmware displayed at the bottom of the screen may differ and the firmware is subject to change for the improvement of product functions.
※ If you have adjusted the settings in Service Mode, you have to reset the product.
ITEM Range Initial RF AV Componet PC HDMI/DVIPattern Select 0~31 0 0 0 0 0 0CDC Sw On/Off Off Off Off Off Off OffCDC Strength Th 0~31 10 10 10 10 10 10BRE Sw On/Off Off Off Off Off Off OffFRC Repeat Mode On/Off Off Off Off Off Off OffFRC DBG MarkOn 0~15 0 0 0 0 0 0FRC Bypass On/Off Off Off Off Off Off OffCDC Lower Gain 0~31 4 4 4 4 4 4CDC Upper Gain 0~31 6 6 6 6 6 6Panel Type Read OnlyPanel Inch Read OnlyPanel Version Read OnlyLogic Sw Version Read OnlyPanel Temp Read Only
7. Pdp Logic
Troubleshooting
Samsung Electronics 4-23
8. SOUNDITEM Range Initial RF AV Componet PC HDMI/DVI
AM Mute Th_High 0~20 7
Same as Initial Data
AM Mute Th_Low 0~20 8FM Mute Th_High 0~96 14FM Mute Th_Low 0~96 7NICAM Fine Vol 0~40 20FM Fine Vol 0~40 20AM Fine Vol 0~40 19Fine Tune Vol 0~40 20SC1 Fine Vol 0~40 20SC2 Fine Vol 0~40 20
Output Matrix Bypass/L_Mono/R_Mono Bypass
MTS Num of Check 0~80 50MTS Pilot Num 0~50 35MTS Pilot Low 64~137 112MTS Pilot High 89~160 128MTS SAP Num 0~50 20MTS SAP Low 69~132 101MTS SAP High 101~202 167MTS SAP Mute Lvl 0~100 0MTS Fine Vol 0~40 20MTS SAP Fine Vol 0~40 20FM Mute Th_H HDev 0~150 57FM Mute Th_L Hdev 0~150 38Speaker EQ On/Off On
Troubleshooting
4-24 Samsung Electronics
ITEM Range Initial RF AV Componet PC HDMI/DVIRF PAL-B/G 0~10 6
Execute calibration in Factory Mode1. Source : VIDEO2. Setting Mode : PAL Video (MODE : #2)3. Pattern : Pattern #24 (Chess Pattern)4. Use Equipment : MSPG945 Series or MSPG925 Series5. Work order
1) Enter by Factory Mode select "1. CALIBRATION".2) Select "AV CALIBRATION" again in CALIBRATION MENU.3) After Completing Calibration, come out "Av success". OSD on the screen (bottom-side) for about 3 seconds.
Source AV : PAL composite, Component : 1280*720/60Hz(720P)PC : 42" - 1024*768/60Hz
50" - 1360*768/60Hz
( Chess Pattern )
Troubleshooting
4-28 Samsung Electronics
■■ White Balance - Adjustment
If picture color is wrong, check White Balance condition.
Equipment : CA210, Patten : ToshibaAdjust W/B in Factory Mode
Sub brightness and R/G/B Offset controls low light regionSub contrast and R/G/B Gain controls high light regionSource AV : PAL composite, Component : 1280*720/60Hz,
HDMI[DVI] : 1280*720/60Hz
[ Test Pattern : MSPG-945 Series Pattern #16 ]
* Color temperature 1500K ± 500, -6 ~-20 MPCD
* Color coordinate H/L : 278/285 ± 2 L/L : 278/285 ± 3, 1.9ft ± 0.05ft(This Data will be able to be changed according to Picture quality Setting,Please refer to latest data from Factory.)
( SAMSUNG WHITE BALANCE Adjustment PATTERN with FPD )
■■ Conditions for Measurement
1. On the basis of toshiba ABL pattern : High Light level (57 IRE)- INPUT SIGNAL GENERATOR : MSPG-925SM or MSPG-945FS* MODE No 2 : 744*484@60Hz
2. Optical measuring device : CA210 (FL)Please use the MSPG Series LTH generator for model PS-42C91H, PS-50C91H.
Troubleshooting
Samsung Electronics 4-29
■■ Method of Adjustment
1. Adjust the white balance of AV, Component and DVI Modes.(AV → Component)a) Set the input to the mode in which the adjustment will be made (RF → DTV → PC → DVI).
* Input signal - VIDEO Mode : Model #2 (744*484 Mode), Pattern #92- DTV, DVI Mode : Model #6 (1280*720 Mode), Pattern #92- HDMI Mode : Model #6 (1280*720 Mode), Pattern #92
b) Enter factory color control, confirm the data.
c) Adjust the low light. (Refer to table 1, 2 in adjustment position by mode)- Adjust sub - Brightness to set the 'Y' value.- Adjust red offset ('x') and blue offset ('y') to the color coordinates.
* Do not adjust green offset data.
d) Adjust the high light. (Refer to table 1, 2 in adjustment position by mode)- Adjust red gain ('x') and blue gain ('y') to the color coordinates.
* Do not adjust the green gain and sub-contrast (Y) data.
( SAMSUNG WHITE BALANCE Adjustment PATTERN with FPD )
( SAMSUNG WHITE BALANCE Adjustment PATTERN with FPD )
Low lightMeasurement point
Hight lightMeasurement point
Troubleshooting
4-30 Samsung Electronics
Replaced assembly items Check Items
ASSY PCB MISC-MAIN 1) Auto Program2) White Balance Adjust
SMPS-PDP TV Vs, Va voltage check and adjustASSY PDP MODULE P-LOGIC MAIN
※ When replacing the SMPS or PDP panel, you have to check the voltage printed on the panel sticker and adjust it.
4-2-5 Replacements & Calibration
* PDP 42" Check items listed after changing each
Troubleshooting
Samsung Electronics 4-31
Voltage LabelSMPS
2. A point of adjusting SMPS-MAIN voltage.
Vs Adjustment
Va AdjustmentVa Test point
Vs Test point
Value Board AdjustmentVs 210
SMPSVa 63
Vset -Ve 94
Vscan -190
■ Voltage Adjustment
1. After replacing the SMPS or PDP panel, you must adjust the voltage referring to the voltage label printed on the panel.(If you do not adjust the voltage, an abnormal discharge symptom may appear.)
Troubleshooting
4-32 Samsung Electronics
■■ Y-RR and Y-FR controls
60usec
80usec
Test Point
Rising rampvariable resistor
Falling rampvariable resistor
Set the main reset (rising : 60usec, falling : 80usec) by change the value of variable resistor.
Troubleshooting
Samsung Electronics 4-33
4-3 Upgrade
4-3-1 How to Update Flash ROM (with RS-232C Cable)
1. Install the MTKtoolConnect Set (Service Jack) and Jig Cable to execute Program Update.
Check In factory menu 2. Option Byte → "Logic D/L" should be "OFF"
"Uart Select" should be "Debug D/L"
2. Turn on the Set (or on Stand by mode)- Run "MTKtool"
- Click Reset - Choose MT8202 ①- Select Com Port ② (Auto Detect)- Select Bin file, by browse ③- Click Upgrade button ④
3. Turn off (= AC Power off) the Set (waiting a few seconds) and turn on again.
Troubleshooting
4-34 Samsung Electronics
4-3-2 How to Update Flash ROM (with UART JIG)
※ In the usual cases, Update S/W by using RS-232C Cable.
1. If some problems occur under this condition, update S/W by using UART JIG.
2. You can use UART JIG with USB Connection.
3. Install in your PC before using the JIG.Connect 4P Lead connector to Main Board (CN501)
Troubleshooting
Samsung Electronics 4-35
4-3-3 Pin Assignment
1. Turn on the Set (or on Stand by mode)- Run "MTKtool"
2. When you run "MTKtool", this Program can detect USB port automatically.Choose USB interface and Update S/W as RS-232C case.
< JIG Part > < Main Board >
Troubleshooting
4-36 Samsung Electronics
4-3-4 How to Check the Version of the Program
1. Procedures for checking in the Factory Menu.When entering Factory Mode, the version of the software is displayed at the bottom of the menu as described on page 4-17.