Hydraulic Scissor Liſt Extended Height – 32’ 38’ Rad Center with Matsing 12.6 Antenna Dual Hydraulically Actuated Liſting Cylinders Velocity Fuses for Rapid Fluid Loss Control 5-Stage Scissor Assembly with Guying Eyelets Mul-Port Coax Bulkhead Per Design Powder Coated for Corrosion Resistance Stainless Steel Hardware for Corrosion Protecon Hydraulic Reservoir and Control System Hydro-Safe®, Bio-degradable Vegetable Based Hydraulic Fluid Includes Rotang Mounng Frame for Matsing® 12.6 Antenna Pneumac Masts: 45’ 800-lb. Payload Capacity 60’ 530-lb. Payload Capacity 59’ 1,200-lb. Payload Capacity Guy Kit & Protecve Weather Cover Included Generators: 10 kW 1-Phase, 3-Wire, 120/240 Volt 20 kW 1-Phase, 3-Wire, 120/240 Volt 36 kW 1-Phase, 3 Wire, 120/240 Volt Block Heater and Baery Charger Included Oponal Automac Transfer Switch UL® Listed Equipment Cabinet: As Needed For Project Requirements Opons/Add-ons: 3-Sector Antenna Mounng System Mast Mounng Frame for 12.6 Antenna Mid-Level Microwave Mount Pan & Tilt Microwave Mount with Controller 26,000-lb. GVWR 35,000-lb Pintle Hitch with 7,000-lb. Tongue Load (Vercally Adjustable) 25,000-lb. Tongue Jack, Conspicuity Markings 7,000-lb. Leveling Jacks (4), Adjustable Safety Chains Universal Mounng, Non-Skid Hot Dipped Galvanized Steel Grang Deck Hot Dipped Galvanized Safety Railing Around Perimeter of Trailer Hot Dipped Galvanized, Mulple Posion Outriggers Traversing Axle Carriage (To Balance load Distribuon) 235/80R16 - Load Range H Tires, Spare Tire Included Electric Brakes, (Both Axles) With Emergency Break-Away 91” or 101” OSHA Compliant Crows Nest Mast Support Structure DOT Compliant LED Lighng and Conspicuity Markings Storage Boxes — Saddlebag (2), Crows Nest (1) Retractable Rear Approach Steps 12/18 22’ Trailer (DOT Compliant)