SAIPDF-1

�� ( 09 ) 834 7119 Free Fax 0800 40 40 44 �� [email protected]


CUTTING & GRINDING WHEELS

INFORMATION

Safety Information

Safety pictograms Application pictograms

Wear ear protection

Wear eye protection

Wear a dust mask

Cutting only

Do not use a damaged wheel

Grinding wheel

Wear gloves

Read the instructions

How to use the wheel

INOX STAINLESS

STEEL CAST IRON

MASONRY ALUMINIUM NON-FERROUS

Safety Considerations 1. Always read the safety instructions and standards before using the machine and wheel. Use the cor-

rect wheel for the machine and application. 2. Always visually inspect all wheels prior to mounting for possible damage. Never mount a damaged

wheel. 3. Always ensure that the spindle speed of the machine is no higher than the operating speed marked on

the wheel. 4. Always wear appropriate safety clothing, gloves, hearing, respiratory and eye protection. 5. Never force a wheel onto a machine spindle. Ensure the bore size of the wheel matched the spindle

size of the machine. 6. Ensure correct size & type flanges are used. 7. Never use incorrect, damaged, dirty or burred mounting flanges. 8. Ensure the machine is in optimum condition with the correct safety guard in place.

Type 41 Type 42 Type 27 Type 28 Type 29

Angle grinder (grinding)

Angle grinder (polishing)

Angle grinder (cutting off)

Portable chop saw (cutting off)

Circular saw (cutting off)

Use the correct wheel for the application


CUTTING & GRINDING WHEELS

INFORMATION

DO’s and DONTs for Cutting-Off & Grinding Wheels

Safety Advise - Do’s � DO always handle and store wheels carefully. Cutting-off wheels should be stacked horizontally and flat, preferably

on a steel base plate. Depressed centre wheels should be placed on top of each other or stored in the original packaging.

� DO always visually inspect all wheels before mounting for possible damage in transit. � DO always use a safety guard and ensure that it is correctly positioned and securely fitted. It should cover at least

one half of the wheel and protect the operator in the unlikely event of a wheel breakage. NON’REINFORCED CUTTING-OFF WHEELS SHOULD ONLY BE USED ON FIXED MACHINES AND SHOULD BE CORRECTLY GUARDED.

� DO always switch ‘OFF’ the power at supply source and/or remove the plug from the socket before changing the wheel.

� DO always use the tools supplied by the machine manufacturer to change the wheel. � DO always ensure that the spindle speed of the machine does not exceed the operating speed marked on the

wheel. � DO always use the correct wheel mounting flanges and ensure that they are undamaged, clean and free from

burrs. � DO SEE EN 12413. � DO allow newly mounted wheels to run at operating speed, with the guard in place, for a reasonable time before

cutting or grinding. � DO always wear EYE PROTECTION. � DO always wear appropriate safety clothing such as DUST MASK, GLOVES, EAR PROTECTION, OVERALLS

AND SAFETY SHOES. � DO always have machine speeds checked regularly, especially after maintenance or repair. Machines fitted with

speed control devices (Governors), must be properly maintained at all times. � DO check tension of driving belts, where fitted, on a regular basis. Belts must be kept tight to ensure full power

transmission. � DO always secure the workpiece firmly while it is being cut or ground. � DO put portable machines in suitable cradles, when not being used, to avoid damage to the wheel. � DO always use a portable machine in a comfortable position, where the workpiece is well balanced and the ma-

chine is well supported. � DO grind at an angle above 30 degrees to the workpiece with a depressed centre grinding wheel. � DO keep the working area around cutting and grinding operations clear. It is very dangerous if an operator trips

and falls with an operating machine in his hands. � DON’T handle wheels roughly. � DON’T use non-reinforced cutting-off wheels on portable machines. � DON’T store wheels in a damp atmosphere or in extreme temperatures. � DON’T use a damaged wheel. � DON’T EVER exceed the maximum operating speed marked on the wheel. � DON’T force a wheel onto a machine spindle. � DON’T use mounting flanges which are incorrect, damaged, dirty or burred. � DON’T tighten the mounting nut or locking flange excessively. To do so can distort the flanges. � DON’T use blotters with depressed centre wheels less than or equal to 406mm (EN 12413). � DON’T use a machine which is not in good mechanical condition. � DON’T use a machine without a wheel guard. � DON’T use wheels without proper ventilation or dust protection equipment. � DON’T apply side pressure to cutting-off wheels. You should not bend the wheel. � DON’T stop the wheel by applying pressure to the periphery or face. Always switch the machine off and allow the

wheel to stop revolving. � DON’T allow the wheel to be trapped or pinched in the cut. � DON’T apply excessive pressure onto the wheel so that the driving motor slows down. � DON’T grind on the side of cutting-off wheels or depressed centre wheels below 4.0mm thickness. � DON’T drop or lower a portable machine by the cable or airline onto the floor. A wheel can be easily cracked, f it is

put down hard, by the weight of the machine. This is a common cause of wheel breakage. � DON’T grind with a depressed centre grinding wheel at an angle below 30 degrees to the workpiece. � DON’T use a machine in a position where you do not have full control of the machine and you are not well bal-

anced.


NORTON INDUSTRIAL METAL

3.1.1

WHEELS

DIAMETER X THICKNESS X

BORE

BARCODE 9310357- GRADE Max

RPM BOX PRODUCT CODE

100 X 6 X 16 265122 A24 Metal DC 15000 50 AD100616

115 X 6 X 22 265139 A24 Metal DC 13000 50 AD115622

125 X 6 X 22 300564 A24 Metal DC 12000 50 AD125622

180 X 6 X 22 300571 A24 Metal DC 8600 25 AD180622

230 X 6 X 22 300588 A24 Metal DC 6800 25 AD230622

Metal Grinding Wheels • Norton Industrial Metal Depressed

Centre Wheels will grind most steel, iron and metal workpieces

• Also known as DC, Depressed Centre and Raised Hub wheels

HIGH SPEED VS LOW SPEED

300 and 350mm Cutting Wheels : Use Low or Standard Speed wheels for portable electric Cut Off Saws. Use High Speed blades for petrol driven Cut Off Saws.

Metal Cutting Off Wheels • For cutting most steel and iron

based materials

• Norton Industrial products are extremely consistent and developed to meet the highest industrial standards

• There is a bore size to suit all angle grinders and most common electric saws. Ask your Norton Representative for a bore size chart if required for point of sale purposes

DIAMETER X THICKNESS X BORE



100 X 2.5 X 16 264828 A36T Metal 15 100 AC100316

115 X 2.5 X 22 264835 A36T Metal 13 100 AC115322

125 X 2.5 X 22 264842 A36T Metal 12 100 AC125322

180 X 2.5 X 16 300250 A24T Metal 8 500 50 AC180316

180 X 2.5 X 20 300267 A24T Metal 8 500 50 AC180320

180 X 2.5 X 22 300274 A24T Metal 8 500 50 AC180322

200 X 2.5 X 16 300298 A24T Metal 7 600 50 AC200316

200 X 2.5 X 22 300304 A24T Metal 7 600 50 AC200322

200 X 2.5 X 25 300311 A24T Metal 7 600 50 AC200325

200 X 2.5 X 35 300328 A24T Metal 7 600 50 AC200335

230 X 2.5 X 22 300359 A24T Metal 6 600 50 AC230322

230 X 2.5 X 25 300342 A24T Metal 6 600 50 AC230325

230 X 2.5 X 35 300366 A24T Metal 6 600 50 AC230335

300 X 3 X 25 300397 A36P Metal 4 600 10 AC300325

350 X 3 X 25 300410 A36P Metal 3 900 10 AC350325

300 X 3.4 X 20 300694 A24R Hi-Speed 6 400 10 AC300420H

300 X 3.4 X 25 300755 A24R Hi-Speed 6 400 10 AC300425H

350 X 3.4 X 20 300700 A24R Hi-Speed 5 500 10 AC350420H

350 X 3.4 X 25 300762 A24R Hi-Speed 5 500 10 AC350425H


NORTON INDUSTRIAL MASONRY

3.2.1

WHEELS

Masonry D/C Grinding Wheels • For grinding of Masonry, cast iron,

and soft metals such as aluminium

• Also known as DC, Depressed Centre or Raised Hub Wheels




100 X 6 X 16 265160 C24 Masonry 15 300 50 CD100616

115 X 6 X 22 301332 C24 Masonry 13 300 50 CD115622

125 X 6 X 22 301349 C24 Masonry 12 200 50 CD125622

180 X 6 X 22 300519 C24 Masonry 8 500 25 CD180622

230 X 6 X 22 300526 C24 Masonry 6 800 25 CD230622

Masonry Cutting Off Wheels • For cutting Masonry and cement

based products

• Designed for dry cutting

• Also able to be used for cutting aluminium and cast iron




100 X 2.5 X 16 265153 C24 Masonry 15 300 100 CC100316

115 X 2.5 X 22 264804 C24 Masonry 13 300 100 CC115322

125 X 2.5 X 22 264811 C24 Masonry 12 200 100 CC125322

180 X 2.5 X 16 300052 C24 Masonry 8 500 50 CC180316

180 X 2.5 X 20 300069 C24 Masonry 8 500 50 CC180320

180 X 2.5 X 22 300076 C24 Masonry 8 500 50 CC180322

200 X 2.5 X 16 300090 C24 Masonry 7 600 50 CC200316

200 X 2.5 X 22 300106 C24 Masonry 7 600 50 CC200322

200 X 2.5 X 25 300113 C24 Masonry 7 600 50 CC200325

200 X 2.5 X 35 300120 C24 Masonry 7 600 50 CC200335

230 X 2.5 X 16 300137 C24 Masonry 6 600 50 CC230316

230 X 2.5 X 22 300151 C24 Masonry 6 600 50 CC230322

230 X 2.5 X 25 300144 C24 Masonry 6 600 50 CC230325

230 X 2.5 X 35 300168 C24 Masonry 6 600 50 CC230335

300 X 3.4 X 20 300670 C24 Hi-Speed 6 400 10 CC300420

300 X 3.4 X 25 300175 C24 Hi-Speed 6 400 10 CC300425

350 X 3.4 X 20 300687 C24 Hi-Speed 5 500 10 CC350420

350 X 3.4 X 25 300182 C24 Hi-Speed 5 500 10 CC350425

HIGH SPEED VS LOW SPEED 300 and 350mm Cutting Wheels : Wheels designated High Speed may be used on petrol powered machines operating at 100 M/S periphery speed. Standard Speed wheels are designed for electric or air tools operating at 80 M/S.

It is good operator practice to check that the wheel speed is correct for the machine prior to mounting the wheel.

SAFETY FIRST Remember - Reinforced wheels can be dangerous if used incorrectly. Always wear eye and hearing protection when using cutting and grinding discs. Respiratory and hand protection is strongly recommended.


ULTRA THIN METAL C/O WHEELS

3.3.1

INOX Ultra Thin Metal Cutting Off Wheels

NORZON Thin Metal Cutting Off Wheels

• 1.6 mm thick NorZon 4 blades are specifically designed for cutting stainless steel and other sheet metals up to 3.0mm thick with an excellent balance be-tween cutting speed and wheel life.


Barcode

- GRADE Max RPM

PACK NZ PRODUCT

CODE

115 X 1.0 X 22 5450248231400 C60TBF41 13 300 25 ACT115122MP

125 X 1.0 X 22 5450248231585 C46T 12 300 25 ACT125122MP

115 X 1.6 X 22 8711479427534 C46T 13 300 25 ACT115222MP

125 X 1.6 X 22 5711479427541 C46T 12 300 25 ACT125222MP

180 X 1.6 X 22 871179427336 C46T 8 500 25 ACT180222MP

230 X 1.6 X 22 5450248231592 C46T 6 650 25 ACT230222MP

Norton Multi Purpose Cutting Off Wheels

• Norton Multi Purpose cutting wheels are designed to cut a wide range of mate-rials including Plastics, Ceramic Tiles, Stone, ferrous and non-ferrous metals.


Barcode

3157624 - GRADE Max RPM

PACK NZ PRODUCT

CODE

115 X 1.6 X 22 474339 A30Q 13 300 25 ACT115122ALU

125 X 1.6 X 22 474360 A30Q 12 300 25 ACT125122ALU

Norton Aluminium Cutting Off Wheels

• Norton Aluminium cutting wheels are specifically designed for cutting Aluminium and non ferrous metals.

• 76mm wheel is designed for sheet metal cutting and automotive panels with 76mm small air cutting-off saws providing a fast, clean cut for small areas.

• 115mm & 125mm X 1.0 mm Ultra thins are primarily for cutting of up to 2.0mm thick sheetmetal.

• Iron, Sulphur and Chlorine Free - suitable for all structural and food grade stainless steel work.

• The thinner blade concentrates the power of the grinder to a small area and so increases the cutting speed.


Barcode

315762 - GRADE Max RPM

PACK NZ PRODUCT

CODE

100 X 1.6 X 16 455920 4NZ46Z 15 300 25 ACT100116 NZ

125 X 1.6 X 22 643443 4NZ46Z 12 300 25 ACT125122 NZ

115 X 1.6 X 22 643457 4NZ46Z 13 300 25 ACT115122 NZ

180 X 1.6 X 22 376770 4NZ46Z 8 500 25 ACT180222 NZ

230 X 1.9 X 22 376771 4NZ46Z 6 650 25 ACT230222 NZ

WHEELS


Barcode

315762 - GRADE Max

RPM PACK

NZ PRODUCT CODE

76 X 1.6 X 10 447425 4 57A46Z 19 100 25 ACT07519

115 X 1.0 X 22 447492 57A46Z 13 300 25 ACT115122 IX

125 X 1.0 X 22 447510 57A46Z 12 300 25 ACT125122 IX

100 X 1.0 X 16 9310357266556 A46T-BF41 15 300 25 ACT100116IX


ULTRA THIN METAL C/O WHEELS

3.3.2

WHEELS


Barcode

9314188 GRADE Max

RPM PACK PRODUCT CODE

76 X 0.89 X 9.5 027089 A60T 23 900 100 3507610

102 X 1.0 X 16 005032 A46T 15 300 100 15102010

102 X 1.6 X 16 004295 A46T 15 300 100 15102016

115 X 1.0 X 22 004288 A46T 13 290 100 15115010

115 X 1.6 X 22 004295 A46T 13 290 100 15115016

115 X 2.0 X 22 038078 A46T 13 290 100 1511522

127 X 1.0 X 22 004271 A46T 12 250 100 15127010

127 X 1.6 X 22 004332 A46T 12 250 100 15127016

127 X 2.0 X 22 038108 A46T 12 250 100 1512722

178 X 2.0 X 22 004318 A46T 8 500 50 15178020

230 X 2.0 X 22 004301 A46T 6 650 50 15230020

FLEXOVIT Ultra Thin Metal Cutting Off Wheels

• Iron, Sulphur and Chlorine Free - suitable for all structural and food grade stainless steel work.

• Low noise, Low dust and minimal vibration and reduced sparks.

• Fast, precise burr free cutting with low energy consumption and reduced opera-tor fatigue.

FLEXOVIT Ultra Thin Metal Cutting Off Wheels DC

• Ultra thin premium grade - for cutting stainless steel and hard ferrous metals.

• Free of iron, sulphur and chlorine

• Fast, clean cutting and excellent life.


Barcode

9314188 GRADE Max


125 X 2.0 X 22 074564 A46T 12 250 100 7312720

180 X 1.6 X 22 074625 A30V 8 500 50 7318016

230 X 1.9 X 22 074632 A30V 6 650 50 7323019

FLEXOVIT Ultra Thin Metal Cutting Off Wheels DC

• Ultra thin premium grade - for cutting stainless steel and hard ferrous metals.

• Free of iron, sulphur and chlorine

• Excellent cutting performance and life.


Barcode

9314188 GRADE Max


115 X 0.8 X 22 074588 A60V 13 300 25 73115080

125 X 0.8 X 22 074618 A60V 12 250 25 73125080


SPECIALTY WHEELS

3.3.3

WHEELS


Barcode

9314188 GRADE Max


115 X 2.2 X 22 130109 A46S 13 300 25 7211522

125 X 2.2 X 22 130116 A46S 12 250 25 7212522

100 X 2.2 X 22 130291 A46S 15 300 25 7210016

FLEXOVIT All in One

• Cutting, light grinding and polishing with one single product.

• Low vibration; comfortable operation.

• The fine grit provides an excellent and uniform finishing result.

• Very smooth grinding result with an incredible clean surface.

• Low cutting temperature due to special filters.

• Free of iron, sulphur and chlorine.


Barcode

9314188 GRADE Max


115 X 4.0 X 22 130208 A36T 13 300 20 72511536

115 X 4.0 X 22 130215 A60T 13 300 20 72511560

125 X 4.0 X 22 130222 A36T 12 250 20 72512536

125 X 4.0 X 22 130239 A60T 12 250 20 72512560

FLEXOVIT Mega-View Grinding and Finishing Wheels

• Continuous view of the work piece.

• Cool grinding thanks to 3 slots in the wheel.

• Light grinding and blending in one action.

• Long life.

• Low vibration and comfortable grinding.

• Uniquely patterned face prevents loading.


CUTTING OFF WHEELS

3.3.4

FLEXOVIT Cutting Off Wheels Type 41


Barcode

9314188 GRADE Max


100 X 2.5 X 16 001287 FH38 15 300 100 1010216

115 X 2.5 X 22 001324 FH38 13 300 100 1011522

125 X 2.5 X 22 001454 FH38 12 250 100 1012722

150 X 2.5 X 22 001676 FH38 10 200 50 1015222

180 X 2.5 X 16 001751 FH38 8 500 50 1017816

180 X 2.5 X 20 001805 FH38 8 500 50 1017820

180 X 2.5 X 22 001843 FH38 8 500 50 1017822

200 X 2.5 X 16 001935 FH38 7 650 50 1020316

200 X 2.5 X 22 001973 FH38 7 650 50 1020322

200 X 2.5 X 25.4 002031 FH38 7 650 50 1020325

200 X 2.5 X 35 002116 FH38 7 650 50 1020335

230 X 2.5 X 16 002161 FH38 6 650 50 1023016

230 X 2.5 X 22 002208 FH38 6 650 50 1023022

230 X 2.5 X 25.4 002246 FH38 6 650 50 1023025

230 X 2.5 X 35 002338 FH38 6 650 50 1023035

254 X 3.1 X 25.4 008019 2UU 7 650 50 2025425

• General purpose cutting of ferrous metals.


General Purpose


Barcode

9314188 GRADE Max


50 X 0.89 X 9.53 A60TB 30 550 25 3505010

76 X 0.89 X 9.53 027089 A60TB 25 000 50 3507510

100 X 2.5 X 16 006039 FH38 15 300 100 1810216

115 X 2.5 X 22 006169 FH38 13 300 100 1811522

125 X 2.5 X 22 006299 FH38 12 250 100 1812722

180 X 2.5 X 22 006558 FH38 8 500 50 1817822

230 X 2.5 X 22 006688 FH38 6 650 50 1823022

Iron Free

• General purpose cutting of stainless steel and ferrous metals (bar, tubing, etc.).

• Fast cutting and excellent life.


Barcode

9314188 GRADE Max


300 X 3.0 X 25.4 007043 A36S 5 100 20 1930525

356 X 3.0 X 25.4 007173 A36S 4 400 10 1935625

406 X 3.0 X 25.4 007302 A36S 3 850 10 1940625

WHEELS

• Standard grade—for cutting stainless steel and ferrous metals.

• Free of iron (I/F).



CUTTING OFF WHEELS

3.3.5

FLEXOVIT Cutting Off Wheels Type 41


Barcode

9314188 GRADE Max


100 X 2.5 X 16 005025 FH38 15 300 100 1610216

115 X 2.5 X 22 005155 FH38 13 300 100 1611522

125 X 2.5 X 22 005285 FH38 12 250 100 1612722

180 X 2.5 X 22 005582 FH38 8 500 50 1617822

230 X 2.5 X 22 005674 FH38 6 650 50 1623022

• For cutting non-ferrous metals such as aluminium, copper, brass and bronze.

• Has a load resistant bond.

Aluminium


Barcode

9314188 GRADE Max


100 X 3.2 X 16 030140 FH64 15 300 100 4010216

115 X 3.2 X 22 030188 FH64 13 300 100 4011522

125 X 3.2 X 22 030355 FH64 12 250 100 4012722

180 X 3.2 X 16 030799 FH64 8 500 50 4017816

180 X 3.2 X 20 030836 FH64 8 500 50 4017820

180 X 3.2 X 22 030874 FH64 8 500 50 4017822

200 X 3.2 X 16 031024 FH64 7 650 50 4020316

200 X 3.2 X 22 031062 FH64 7 650 50 4020322

200 X 3.2 X 25.4 031109 FH64 7 650 50 4020325

200 X 3.2 X 35 031192 FH64 7 650 50 4020335

230 X 3.2 X 16 031284 FH64 6 650 50 4023016

230 X 3.2 X 22 031321 FH64 6 650 50 4023022

230 X 3.2 X 25.4 031369 FH64 6 650 50 4023025

230 X 3.2 X 35 031451 FH64 6 650 50 4023035

• General purpose dry cutting of most masonry products (e.g. brick, concrete pavers, ceramic and stone).

• Also suitable for non-ferrous metals

• Long life

Masonry

WHEELS


CUTTING OFF WHEELS

3.3.6

FLEXOVIT Type 42 Pipeliners


Barcode

9314188 GRADE Max


100 X 3.4 X 16 063179 A30S 15 300 100 6310234

115 X 3.4 X 22 063308 A30S 13 300 100 6311534

125 X 3.4 X 22 060277 A24/30 12 250 100 6012734

180 X 3.4 X 22 060536 A24/30 8 500 50 6017834

230 X 3.4 X 22 060703 A24/30 6 650 50 6023034

• General purpose cutting ferrous metals including structural settle and sheet metals.


• Suitable for notching.

General Purpose DC PIPELINER


Barcode

9314188 GRADE Max


115 X 3.4 X 067177 A30S 13 300 100 6711534

125 X 3.4 X 068143 A24/30 12 250 100 6812734

180 X 3.4 X 068402 A24/30 8 500 50 6817834

• Standard grade—for cutting stainless steel and ferrous metals.


• Fast cutting and excellent life.

• Suitable for notching

Iron Free DC PIPELINER


Barcode

9314188 GRADE Max


115 X 2.5 X 22 002543 A24V 13 300 100 7411525

125 X 2.5 X 22 002529 A24V 12 250 100 7412725

180 X 2.5 X 22 002505 A24V 8 500 50 7417825

180 X 3.0 X 22 002499 A24V 8 500 50 7417830

230 X 2.5 X 22 002482 A24V 6 650 50 7423025

• Premium grade—for cutting stainless steel and ferrous metals.

• Free of iron, sulphur and chlorine.

• EXcellent cutting performance and life.

Mega-Inox DC PIPELINER

WHEELS


GRINDING WHEELS

3.3.7

FLEXOVIT Grinding Wheels Type 27


Barcode

9314188 GRADE Max


100 X 6.0 X 16 063254 A30S 15 300 50 6310260

115 X 6.0 X 22 063384 A30S 13 300 50 6311560

• General purpose grinding of ferrous metal welds and structural steels.

• Excellent grinding performance and stock removal.

A30S General Purpose


Barcode

9314188 GRADE Max


125 X 6.8 X 22 060352 A24/30T 12 250 50 6012768

180 X 4.5 X 22 060574 A24/30T 8 500 40 6017845

180 X 6.8 X 22 060611 A24/30T 8 500 25 6017868

230 X 6.8 X 22 060796 A24/30T 6 650 10 6023068

• General purpose grinding of ferrous metal welds and structural steels.

• Excellent grinding performance and life.

A24/30T


Barcode

9314188 GRADE Max


180 X 6.8 X 22 061496 A24/30P 8 500 25 6117868

230 X 6.8 X 22 061731 A24/30P 6 650 10 6123068

• For grinding harder metals (e.g. alloy steels, hard facing, Ni-hard, etc.).

• Excellent grinding performance and fast stock removal.

A24/30P


Barcode

9314188 GRADE Max


100 X 6.0 X 16 067122 A30S 15 300 50 6710260

115 X 6.0 X 22 067252 A30S 13 300 50 6711560

125 X 6.8 X 22 068228 A24/30T 12 250 50 6812768

180 X 6.8 X 22 068488 A24/30T 8 500 25 6817868

230 X 6.8 X 22 068617 A24/30T 6 650 25 6823068

• Standard grade—for general purpose grinding of stainless steel and harder ferrous metals.


• Excellent grinding performance and stock removal.

Iron Free WHEELS


GRINDING WHEELS

3.3.8



Barcode

9314188 GRADE Max


100 X 6.0 X 16 069102 A30S 15 300 50 6910260

115 X 6.0 X 22 069232 A30S 13 300 50 6911560

125 X 6.8 X 22 070313 A24/30P 12 250 50 7012768

180 X 6.8 X 22 070535 A24/30P 8 500 25 7017868

230 X 6.8 X 22 070665 A24/30P 6 650 25 7023068

• For grinding non-ferrous metals such as aluminium, copper, brass and bronze.

• Has a load resistant bond.

Aluminium


Barcode

9314188 GRADE Max


100 X 6.0 X 16 075103 C30R 15 300 50 7510260

115 X 6.0 X 22 075233 C30R 13 300 50 7511560

125 X 6.8 X 22 075363 C30R 12 250 50 7512768

180 X 6.8 X 22 075622 C30R 8 500 25 7517868

230 X 6.8 X 22 075882 C30R 6 650 25 7523068

• General purpose grinding of most masonry products (e.g. brick, concrete and stone).

• Also suitable for non-ferrous metals.

Masonry

WHEELS


FLEXIBLE WHEELS

3.3.9



Barcode

9314188 GRADE Max


100 X 3.0 X 16 221104 AC46 15 300 20 8210246

115 X 3.0 X 22 221586 AC46 13 300 25 8211546

125 X 3.0 X 22 222071 AC46 12 250 25 8212746

125 X 3.0 X 22 222118 AC60 12 250 25 8212760

• Used for light weld grinding and polishing of most metals including aluminium.

• Excellent performance and finish.

• Special plastic backing pad must be used and in included in each standard pack.

AC Series—Flexible Wheels


Barcode

9314188 GRADE Max


100 X 3.0 X 16 220107 WA46 15 300 20 82310046

115 X 3.0 X 22 220206 WA46 13 300 25 82311546

125 X 3.0 X 22 220305 WA46 12 250 25 82312546

180 X 3.0 X 22 220404 WA46 8 500 10 82318046

• Used for light weld grinding and polishing of stainless steel.

• Excellent performance and finish.

• Special plastic backing pad must be used and in included in each standard pack.

WA Series—Flexible Wheels

WHEELS


HIGH SPEED WHEELS

3.3.10

FLEXOVIT High Speed Petrol Saws—Demolition Saws


Barcode

9314188 GRADE Max


302 X 3.4 X 20 008149 2UU 6 200 20 2030220

300 X 3.4 X 22 008224 2UU 6 200 20 2030522

305 X 3.4 X 25.4 008279 2UU 6 200 20 2030525

356 X 3.8 X 20 008408 2UU 5 460 10 2035620

406 X 4.4 X 20 004202 2UU 4 780 10 2040620

406 X 4.4 X 25.4 008668 2UU 4 780 10 2040625

305 X 3.4 X 25 010531 A36Q AL 6 200 10 2330525

356 X 3.8 X 25 016373 2UE 5 460 10 2835625

356 X 4.0 X 25.4 005735 65A243P 5 500 10 3135602

• 2UU760SS - General purpose for structural steels, pipe and tube etc.

• 2UE790QR - Specially manufactured for rail cutting. Also suitable for some harder materials.

• A36Q ALU - Cutting non-ferrous metals, aluminium, bronze and brass.

• 65A243P - Rail Cutting

Metal Cutting


Barcode

9314188 GRADE Max


302 X 3.4 X 20 031673 FH64 6 200 20 4030220

305 X 3.4 X 22.2 031710 FH64 6 200 20 4030522

305 X 3.4 X 25.4 031758 FH64 6 200 20 4030525

356 X 4.1 X 20 033172 FH3714 5 460 10 4335620

356 X 4.1 X 25.4 033257 FH3714 5 460 10 4335625

406 X 4.2 X 25.4 FH3714 3 820 10 4340625

• FH64 & FH3714 - Dry cutting of concrete, blocks, pipe, bricks. Fast dry cutting long life.

Masonry Cutting

WHEELS

SAIPDF-1

Documents

grinding wheels safety

wheel breakage

correct wheel mounting

machine spindle

safety instructions

correct safety guard

safety considerations

safety shoes