Saint Gobain Tygon Complete Catalog

Tygon Catalog Collection

Compiled by:

Murdock Industrial Inc

[email protected]

Please visit www.eMurdock.com to order.

Saint-Gobain Performance Plastics

2664 Gilchrist Road • Akron, OH 44305 • Tel: (330) 798-9240 • Fax: (330) 798-6968 • www.tygon.com

Declaration of compliance

for materials made from plastic intended to come into contact with food

Saint-Gobain Performance Plastics 2664 Gilchrist Road

Akron, Ohio 44305

USA

Date of the declaration: November 19th, 2012

Validity: until revocation and renewal Hereby we declare that the following products:

Trade name Material type (polymer)

Tygon® S3 B-44-3

polyvinyl chloride Tygon® S3 B-44-4X

Tygon® S3 E-3603

Tygon® S3 E-LFL

comply with the legal regulations laid down in the Regulation (EU) No 10/2011 as well as in Regulation (EC) No 1935/2004, both as amended. The materials and raw materials used comply with Regulation (EU) No 10/2011. When used as specified, the overall migration as well as the specific migrations do not exceed the legal limits. The tests have been performed according to Article 17 and 18 of Regulation (EU) No 10/2011 in conjunction with Annex V. The following substances subject to restrictions and/or specifications are used in the above- mentioned product:

Name of substance Restriction

Proprietary substance 1 Restrictions stated in Annex I of Regulation (EU) No 10/2011



Proprietary substance 4 Restrictions stated in Annex II of Regulation (EU) No 10/2011

Upon request, Saint-Gobain may disclose proprietary substances to a 3rd party lab to verify testing compliance.

www.eMurdock.com www.TheCatalogRoom.com



Information on dual use substances: no dual substances are used. Specification of the intended use and restrictions: - Type(s) of food intended to come into contact with the above mentioned products:

ANNEX III Table 2

Reference Number

Food Type

01.01 A Clear Drinks: Water, ciders, clear fruit or vegetable juices of normal strength or concentrated, fruit nectars, lemonades, syrups, bitters, infusions, coffee, tea, beers, soft drinks, energy drinks and the like, flavoured water, liquid coffee extract

01.02 Alcoholic beverages of an alcoholic strength of between 6 %vol and 20 %.

03.02 B II Moist confectionary products in paste form

03.03 B Sugar and Sugar products: molasses, sugar syrups, honey, and the like

04.02 B Processed Fruit: Fruit in the form of purée, preserves, pastes or in its own juice or in sugar syrup (jams, compote, and similar products)

04.05 B Processed Vegetables: Fresh Vegetables Peeled or cut

04.05 C Processed Vegetables: Vegetables in the form of purée, preserves, pastes or in its own juice (including pickled and in brine)

06.01 B II Preserved fish in an aqueous medium

06.02 B II crustaceans and mollusks (incl oysters, mussels, snails): shell removed, processed, preserved or cooked with shell: in an aqueous medium

08.01 Vinegar




08.03 B II Preparations for soups, broths, sauces, in liquid, solid or powder form (extracts, concentrates); homogenised composite food preparations, prepared dishes including yeast and raising agents: any other form than powdered or dried: not with fatty character

08.04 B Sauces with aqueous character

8.07 Ice Creams

- Conditions of use including duration and temperature of treatment or storage while in contact with the food: 2 hours, at 70°C. - Products specified are approved for repeat-use conditions.

A functional barrier made from plastic is not used in the above mentioned products. Geometry restrictions for use:

• 1/16 inch (1.59mm) minimum inner diameter for Tygon® S3 B-44-4X and Tygon®

S3 B-44-3.

• 1/8 inch (3.18 mm) minimum inner diameter for Tygon® S3 E-LFL and Tygon® S3

E-3603.

This declaration is valid for the products as described and delivered by us. The verification of compliance was performed based on the rules set out in Regulation (EU) No 10/2011; according to which the product complies with the legal requirements subject to adherence to the stated conditions for the contact with food. In case of deviating food contact conditions, it is up to the user to verify the suitability.

Jennifer Casacchia Quality Assurance Manager Saint-Gobain PPL – Akron, Ohio Facility November 19, 2012 _______________________________________________________________ Place/date/signature


Chemfluor® ConvoFlex™ (Convoluted Flexible) Tubing is specifically designedto be used with the Chemfluor® line of Flare Grip® molded PFA flare fittings.There’s no need for expensive straight cuffs — ConvoFlex is easily cold flaredwith our FastFLARE™ cold forming tools.

ConvoFlex™ tubing resists chemicals and elevated temperatures. It is madefrom FDA-approved Teflon® FEP, offers read-through transparency, andfeatures a spiral design that aids in self-flushing and cleaning. This tubing isused in the biotech, pharmaceutical, aerospace, semiconductor and chemicalprocessing industries. ConvoFlex tubing’s outstanding flexibility, highdielectric strength and superior chemical resistance also make it an excellentchoice for wire conduit.

CHEMFLUOR® CONVOFLEX™ TUBING

Features/Benefits• Flexible convoluted construction• Available in FDA-approved Teflon®

FEP and PFA as well as most otherfluoropolymers

• Easily cold flared for use withChemfluor® Flare Grip® tube fittings

• Read-through transparency• Virtually unlimited length capability• Continuous flow path — self-flushing• Excellent as chemically resistant

wire conduit

Typical Applications• Biotech• Pharmaceutical• Aerospace• Semiconductor• Chemical processing

Designed forUse with FlareGrip® Fittings


FLS-3210-2.5M-0105-SGCS www.bunnell-plastics.com ©2005 Saint-Gobain Performance Plastics Corporation

Chemfluor® ConvoFlex™ Tubing — Specifications

Limited Warranty: For a period of 12 months from the date of first sale, Saint-Gobain Performance Plastics Corporation warrants this product(s) to be free from defects in manufacturing. Our onlyobligation will be to provide replacement product for any portion proving defective, or at our option, to refund the purchase price thereof. User assumes all other risks, if any, including the risk of injury,loss or damage, whether direct or consequential, arising out of the use, misuse, or inability to use this product(s). SAINT-GOBAIN PERFORMANCE PLASTICS DISCLAIMS ANY AND ALL OTHER WARRANTIES,EXPRESSED OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

NOTE: Saint-Gobain Performance Plastics Corporation does not assume any responsibility or liability for any advice furnished by it, or for the performance or results of any installation or use of theproduct(s) or of any final product into which the product(s) may be incorporated by the purchaser and/or user. The purchaser and/or user should perform its own tests to determine the suitability andfitness of the product(s) for the particular purpose desired in any given situation.

A B Wall Thickness Room Temp. BendI.D. O.D. (Nominal) Burst Pressure1 Radius

Cv2

1/4" 3/8" .020" 100 1/2" 0.31

3/8 1/2 .023 70 3/4 0.83

1/2 5/8 .025 60 1 1.64

5/8 3/4 .025 50 1-1/2 2.78

3/4 7/8 .025 40 2 4.56

7/8 1 .025 38 2-1/2 8.20

Note: 1 Each individual application should be evaluated to determine the degree of safetyfactor to be used with these values.

2 Based on a long radius sweep.

ConvoFlex™ tubing can also be made from a wide range of materialsincluding, but not limited to PFA or FEP, PVDF, Tefzel® and Halar®.

CHEMFLUOR® and Flare Grip® are a registered trademark of Saint-Gobain Performance Plastics.

ConvoFlex™ is a trademark of Saint-Gobain Performance Plastics.FastFLARE™ is a trademark of PlastiTECH. Halar® is a registered trademark of Ausimont.Teflon® and Tefzel® are registered trademarks of DuPont.

Diameters up to 4" are available on a custom run basis.

Distributed By:

Saint-Gobain Performance PlasticsI-295 and Harmony Road • Mickleton, NJ 08056Tel: (856) 423-6630 • Toll Free: (800) 543-8823Fax: (856) 423-8182

2664 Gilchrist Road • Akron, OH 44305Tel: (330) 798-9240 • Toll Free: (800) 798-1554Fax: (330) 798-6968

www.bunnell-plastics.c0m


Furon® 400 Series High Purity PFA Tubing

ApplicationsDescriptionFuron 400 Series High Purity Tubingis specifically designed to be usedwith the Furon line of Flare Grip™ II,Flare Grip™, Flare Fittings, FastFLARE™ cold forming tools andGrabSeal™ Tube CompressionFittings.

Furon 400 Series High Purity Tubingfeatures a superior smooth surfaceinner bore which provides excellentnon-wetability, batch-to-batchclean-out, and purging.

Features / Benefits• Non-destructive/non-contaminating

laser scribing for positiveidentification of size, material and100% lot traceability

• Custom laser scribing available(for identifying chemicals/processmedia, tool number, OEM’sname/private label, etc.)

• 100% virgin high purity PFA resin

• Manufactured using ISO 9000guidelines (standard 4.8—productidentification and traceability)

• Heat stabilized during extrusion forbroadest service temperature range

• Tube ends capped to prevent I.D. contamination

• ”Clean-Pak” packaging available

• FDA approved fluoropolymers

Tubing is the tubing to specify whenthe reliability and dependability of anapplication requires the ultimate intraceability, purity, and chemical resistance.

Manufactured from FDA approved fluoropolymers, this tubing is idealfor use in the Semiconductor,Biotech, Pharmaceutical, Food andBeverage, and Chemical Processindustries.

400 Series tubing is now available on whiteplastic reels


Furon® 400 Series High Purity PFA Tubing

Minimum Bend Radius

TUBING .030” Wall .060” WallO.D. Thickness Thickness

1⁄4 ” 2 ” 3⁄4 ”1⁄2 8 23⁄4 20 121 36 24

400 Series “PFA” Tubing: A High Purity all-virgin thermoplastic non-porous tubing with the ability to withstand from a lowcryogenic temperature to a +450°F (232°C) temperature range. Heavy wall is available for additional strength and a longmechanical life.

O.D. TOLERANCE I.D. WALL THICKNESS PART NO.*1⁄8 " ±.005 1⁄16 " .030 TSFP5.125063.HP1⁄4 ±.005 3⁄16 .030 TSFP5.250187.HP1⁄4 ±.005 5⁄32 .047 TSFP5.250156.HP1⁄4 ±.005 1⁄8 .060 TSFP5.250125.HP3⁄8 ±.006 5⁄16 .030 TSFP5.375312.HP3⁄8 ±.006 1⁄4 .060 TSFP5.375250.HP1⁄2 ±.006 7⁄16 .030 TSFP5.500437.HP1⁄2 ±.006 3⁄8 .060 TSFP5.500375.HP3⁄4 ±.008 11⁄16 .030 TSFP5.750687.HP3⁄4 ±.008 5⁄8 .060 TSFP5.750625.HP1 ±.008 7⁄8 .060 TSFP5.100875.HP

11⁄4** ±.008 11⁄8 .060 TSFP5.105457.HP

HIGH PURITY REEL SIZE DOUBLESTANDARD PUT UPS (FLANGE DIA. x HUB DIA. x WIDTH) BAGGED

PRODUCT CODE SIZE 48” x 36” x 18” 36” x 28” x 121⁄2” 12” x 8” x 51⁄2” 100’ COILSTSFP5.100875.HA 1 x 7⁄8” 1000TSFP5.100875.H5 1 x 7⁄8” 500TSFP5.100875.H1 3⁄4 x 5⁄8” 100TSFP5.750625.HA 3⁄4 x 5⁄8” 1000TSFP5.750625.H5 3⁄4 x 5⁄8” 500TSFP5.750625.H1 1⁄2 x 3⁄8” 100TSFP5.500375.HA 1⁄2 x 3⁄8” 1000TSFP5.500375.H5 1⁄2 x 3⁄8” 500TSFP5.500375.H1 1⁄2 x 3⁄8” 100TSFP5.375250.HA 3⁄8 x 1⁄4” 1000TSFP5.375250.H5 3⁄8 x 1⁄4” 500TSFP5.375250.H1 3⁄8 x 1⁄4” 100TSFP5.250156.HA 1⁄4 x 5⁄32” 1000TSFP5.250156.H5 1⁄4 x 5⁄32” 500TSFP5.250156.H1 1⁄4 x 5⁄32” 100

* Ordering Information: Order by Part Number. Custom lengths, special sizes, standard Put-Ups’s, clean-pak and cleanroomcompatible plastic reels are available upon request.

**Consult factory on availability and specification on 1-1/4” O.D. Tubing. Large diameter tubing is susseptable to kinking.Use generous bend radius when installing.

Grab Seal™ is a trademark.

Flare Grip® is a registered trademark.

Furon® is a registered trademark.

12-month Limited Warranty: For a period of 12 months from the date of first sale, Saint-Gobain Performance Plastics Corporation warrants this product to be free from defects in manufacturing. This company’sonly obligation will be to provide replacement product for any material proven to have such a defect, or at SGPPL’s option, to refund the purchase price thereof. User assumes all other risks, if any, including the risk ofinjury, loss or damage, whether direct, consequential or incidental, arising out of the use, misuse, or inability to use this product. SAINT-GOBAIN PERFORMANCE PLASTICS DISCLAIMS ALL IMPLIED WARRANTIESOF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

NOTE: Saint-Gobain Performance Plastics Corporation does not assume any responsibility or liability for any advice furnished by it,or for the performance or results of any installation or use of the product or of any final product into which the product may be incorporated by the purchaser and/or user.

Specifications

Saint-Gobain Performance PlasticsI-295 at Harmony RoadP.O. Box 71Mickleton, NJ 08056Phone: (856) 423-6630Fax: (856) 423-8182

USA Toll Free: (800) 543-8823

ENC 2089 2.5M 0604 STAS www.microelectronics.saint-gobain.com ©2004 Saint-Gobain Performance Plastics Corporation


Home > Products >

Tygon® Flexible Tubing

Norprene® A-60-N Tubing

Norprene® Drinking Water Tubing

Formulation A-60-N

Formulated for use as drinking water tubing.

Typical Physical Properties ASTM Method Value or Rating

Durometer Hardness, Shore A, 15 sec D2240--00 62

Tensile Strength psi (MPa) D412-98 950 (6.6)

Ultimate Elongation % D412-98 420

Tensile Stress @ 100% Elongation, psi (MPa) D412-98 370 (2.6)

Tear Resistance, lb-f/inch (kN/m) D1004-94 120 (21)

Compression SetConstant Deflection, % @ 158°F (70°C) for 22 hrs

D395-98Method B

27

Brittle Temperature °F (°C) D746-98 -75 (-60)

Specific Gravity D792-00 0.98

Water Absorption % 24 hrs @ 73°F (23°C) D570-98 0.30

Maximum Recommended Operating Temp °F (°C)

-- 275 (135)

Color -- Tan

Unless otherwise noted, all tests were conducted at room temperature (73°F). Values shown were determined on 0.075" thick extruded strip or 0.075" thick molded ASTM plaques or molded ASTM durometer buttons.

Tygon®

© Saint-Gobain Performance Plastics, Process Systems 2012 Other Saint-Gobain Web Sites | Contact Us | Legal | Site Map

Specifications

Specifications

Related Links

Page 1 of 1Norprene® A-60-N Drinking Water Tubing | Saint-Gobain Performance Plastics, Process ...

12/13/2012http://www.processsystems.saint-gobain.com/product_detail.aspx?id=256652&printer=1


Features/Benefits• Long flex life in peristaltic pumps• Temperature resistant

from -75°F to 275°F• Compatible with virtually all

common sanitizers and cleaners• Ozone and UV light resistant• Repeatedly autoclavable• Chemically compatible with a

wide range of fluids• Meets FDA, 3-A and NSF criteria

Typical Applications• Cosmetic production• Food and dairy processing• Hot beverage dispensing• Water purification lines• Sanitizer delivery• Soap dispensing• Pesticide/fertilizer delivery• Ink and toner feed lines• Chemical transfer

FORMULATIONA-60-F

For critical processingapplications in thefood, dairy andcosmetic industries

NORPRENE® Food Process Tubing

Versatile Norprene® Food Process Tubing Provides Long Life for Everyday UseNorprene® Food Process Tubing consistently outperforms general purpose rubbertubing in a wide variety of applications. It will not weaken or crack following years of exposure to heat and ozone. Norprene® Food Process Tubing is extremely abrasionresistant and bends easily to simplify custom component assembly.

Simplifies Cleaning and SterilizationNorprene® Food Process Tubing is ideal for use in clean-in-place and steam-in-placecleaning and sterilization systems. It is compatible with virtually all commercialcleaners and sanitizers and can be repeatedly autoclaved for up to five cycle timeswithout affecting its overall service life. Norprene® Food Process Tubing fully complieswith FDA 21 CFR, 177.2600 criteria, 3-A Sanitary Standards and NSF Standard 51, whichare applicable in many food contact applications.

Now Available to Withstand Elevated PressureCertain applications require using pressures that only reinforced tubing can withstand. For those applications, Norprene® Pressure Tubing is now available.It has the same desirable properties as Norprene® Food Process Tubing with anadditional reinforcement embedded within its walls to withstand elevated pressure.(Refer to the Saint-Gobain Performance Plastics data page on Norprene® Pressure Tubing for complete details.)

Excellent Chemical ResistanceNorprene® Food Process Tubing provides superior resistance to many corrosive fluidswhen compared to general purpose rubber tubings. It has excellent acid and alkaliresistance and is compatible with numerous oxidizing agents such as peroxide,hypochlorite and ozone. Norprene® Food Process Tubing also shows good resistance tothe animal and vegetable oils frequently found in food contact applications. Refer tothe comprehensive Tygon® Tubing catalog for a complete listing of common chemicalsand their relative affect on Norprene® Food Process Tubing.

Formulated for flexural resistance and high temperatures, Norprene® Food ProcessTubing does not easily crack or deteriorate, even in physically demanding applications.


Saint-Gobain Performance Plastics2664 Gilchrist RoadAkron, OH 44305Tel: 800-798-1554Tel: (330) 798-9240Fax: (330) 798-6968

www.tygon.comIMPORTANT: It is the user’s responsibility to ensure the suitability and safety of Saint-Gobain Performance Plastics tubing for all intended uses. Laboratory and clinical tests must beconducted in accordance with applicable regulatory requirements in order to determine the safety and effectiveness for use of tubing in any particular application.For a period of 6 months from the date of first sale, Saint-Gobain Performance Plastics Corporation warrants this product to be free from defects in materials and workmanship. Ouronly obligation will be to replace any portion proving defective or at our option to refund the purchase price thereof. User assumes all other risk, if any, including the risk of injury, lossor damage, direct or consequential, arising out of the use, misuse or inability to use this product. THIS WARRANTY IS IN LIEU OF THE WARRANTIES OF MERCHANTABILITY, FITNESS FORPARTICULAR PURPOSE, AND ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED. No deviation is authorized.Saint-Gobain Performance Plastics Corporation assumes no obligations or liability for any advice furnished by it, or for results obtained with respect to those products. All such advice isgiven and accepted at the buyer’s risk.

Norprene® A-60-F Manufactured Sizes and Pressures

Norprene® is a registered trademark.

©2006 Saint-Gobain Performance Plastics FLS-3268-2.5M-0806-SGCS

Saint-Gobain Wall Minimum Max. Working Vacuum RatingPart I.D. O.D. Thickness Length Bend Radius Pressure at In. of Mercury at

Number (inches) (inches) (inches) (feet) (inches) 73°F 180°F 73°F 180°F(psi)* (psi)*

AAL00003 1/16 3/16 1/16 50 1/4 34 21 29.9 29.9

AAL00007 1/8 1/4 1/16 50 1/2 19 12 29.9 29.9

AAL00012 3/16 5/16 1/16 50 3/4 13 8 29.9 23.0

AAL00017 1/4 3/8 1/16 50 1-1/4 10 6 26.0 13.0

AAL00019 1/4 1/2 1/8 50 3/4 19** 12** 29.9 29.9

AAL00022 5/16 7/16 1/16 50 1-1/2 8 5 17.0 8.0

AAL00027 3/8 1/2 1/16 50 2-1/4 7 4 11.0 5.0

AAL00029 3/8 5/8 1/8 50 1-1/4 13** 8** 29.9 23.0

AAL00038 1/2 3/4 1/8 50 2 10** 6** 26.0 13.0

AAL00046 5/8 7/8 1/8 50 3-1/4 8** 5** 17.0 8.0

AAL00053 3/4 1 1/8 50 4 7** 4** 11.0 5.0

*Working pressures are calculated at a 1:5 ratio relative to burst pressure using ASTM D1599.**Available in a reinforced construction for higher pressures.

The values listed for working and burst pressures are derived from tests conducted under controlledlaboratory conditions. Many factors will reduce the tubing’s ability to withstand pressures includingtemperature, chemical attack, stress, pulsation and the attachment to fittings. It is imperative that the userconduct tests simulating the conditions of the application prior to specifying the tubing for use.

Property ASTM Method Value or Rating

Durometer Hardness Shore A, 15 Sec D2240-03 61

Color — Cream

Tensile Strength psi (MPa) D412-98 1,000 (6.9)

Ultimate Elongation, % D412-98 375

Tear Resistance lb-f/inch (kN/m) D1004-03 120 (21)


Water Absorption, % 24 hrs. @ 23°C D570-98 0.30

Compression Set Constant Deflection, D395-03 27% @ 158°F (70°C) for 22 hrs. Method B

Brittleness By Impact Temp., °F (°C) D746-98 -75 (-60)

Maximum Recommended Operating — 275 (135)Temp., °F (°C)

Dielectric Strength, v/mil (kV/mm) D149-97 535 (21.1)

Tensile Modulus, D412-98@ 100% Elongation, psi (MPa) 410 (2.8)@ 300% Elongation, psi (MPa) 800 (5.5)

Tensile Set, % D412-98 47

Unless otherwise noted, all tests were conducted at room temperature (73°F). Values shown were determinedon 0.075" thick extruded strip or 0.075" thick molded ASTM plaques or molded ASTM durometer buttons.

NORPRENE® TUBING IS NOT INTENDED FOR USE AS AN IMPLANT MATERIAL

Norprene® A-60-F Typical Physical Properties


Features/Benefits• Handles at least 4 times the

pressure of non-reinforced tubing• Temperature resistant

from -75˚F to 275˚F• Ozone and UV light resistant• Repeatedly autoclavable• Compatible with a

wide range of fluids• Meets FDA and 3-A criteria

Typical Applications• Cosmetic production• Food and dairy processing• Hot beverage dispensing• Water purification lines• Sanitizer delivery• Soap dispensing• Pesticide/fertilizer delivery• Ink and toner feed lines• Chemical transfer

FORMULATIONA-60-F I.B.

Provides long servicelife even whenexposed to heat,abrasion and pressure

NORPRENE® Pressure Tubing

Versatile Norprene® Tubing Provides Long Life for Everyday UseNorprene® Pressure Tubing consistently outperforms general purpose rubbertubing in a wide variety of applications. It has excellent resistance to ozoneand UV light, with little to no sign of deterioration in laboratory testing to the equivalent of 10 years outdoor exposure. Norprene® Pressure Tubing isextremely abrasion resistant and bends easily to simplify custom componentassembly.

Simplifies Cleaning and SterilizationNorprene® Pressure Tubing is ideal for use in clean-in-place and steam-in-place cleaning and sterilization systems. It is compatible with virtually all commercial cleaners and sanitizers and can be repeatedly autoclaved for up to five cycle times without affecting its overall service life.Norprene® Pressure Tubing fully complies with FDA 21 CFR, 177.2600criteria and 3-A Sanitary Standards.

Excellent Chemical ResistanceNorprene® Pressure Tubing provides superior resistance to many corrosivefluids when compared to general purpose rubber tubings. Norprene® PressureTubing has excellent acid and alkali resistance and is compatible withnumerous oxidizing agents such as hydrogen peroxide, sodium hypochloriteand ozone. It also shows good resistance to the animal and vegetable oilsfrequently found in food contact applications. Refer to the comprehensiveTygon® Tubing catalog for a complete listing of common chemicals and theirrelative affect on Norprene® tubing.

Norprene® Pressure Tubing is ideally suited for applications that require an approved foodcontact surface.



www.tygon.com

IMPORTANT: It is the user’s responsibility to ensure the suitability and safety of Saint-Gobain Performance Plastics tubing for all intended uses. Laboratory and clinical tests must beconducted in accordance with applicable regulatory requirements in order to determine the safety and effectiveness for use of tubing in any particular application.For a period of 6 months from the date of first sale, Saint-Gobain Performance Plastics Corporation warrants this product to be free from defects in materials and workmanship. Ouronly obligation will be to replace any portion proving defective or at our option to refund the purchase price thereof. User assumes all other risk, if any, including the risk of injury, lossor damage, direct or consequential, arising out of the use, misuse or inability to use this product. THIS WARRANTY IS IN LIEU OF THE WARRANTIES OF MERCHANTABILITY, FITNESS FORPARTICULAR PURPOSE, AND ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED. No deviation is authorized.Saint-Gobain Performance Plastics Corporation assumes no obligations or liability for any advice furnished by it, or for results obtained with respect to those products. All such advice isgiven and accepted at the buyer’s risk.

Norprene® A-60-F I B. Manufactured Sizes and Pressures

Norprene® is a registered trademark.



Unless otherwise noted, all tests were conducted at room temperature (73°F). Values shown were determinedon 0.075" thick extruded strip or 0.075" thick molded ASTM plaques or molded ASTM durometer buttons.


Norprene® A-60-F I B.Typical Physical Properties

Saint-Gobain I.D. O.D. Wall Length Minimum Max. Suggested Vacuum Rating,Part (inches) (inches) Thickness (feet) Bend Radius Working Pressure at In. of Mercury at

Number (inches) (inches) 73°F (psi)* 180°F (psi)* 73°F 180°F

APW00019 1/4 1/2 1/8 50 3/4 125 70 29.9 29.9

APW00029 3/8 5/8 1/8 50 1-1/4 105 65 29.9 20.0

APW00038 1/2 3/4 1/8 50 2-1/4 100 60 25.0 15.0

APW00046 5/8 7/8 1/8 50 2-1/2 95 55 20.0 10.0

APW00054 3/4 1-1/16 5/32 50 3-1/4 85 45 10.0 5.0

APW00064 1 1-3/8 3/16 50 5 75 40 12.0 7.0

*Working pressures are calculated at a 1:4 ratio relative to burst pressure using ASTM D1599.



Color — Cream





Water Absorption, % 24 hrs. @ 23° C D570-98 0.30

Compression Set Constant Deflection, D395-03% @158°F (70°C) for 22 hrs. Method B 30

Brittleness by Impact Temp., °F (°C) D746-98 -75 (-60)

Maximum Recommended Operating Temp.,°F (°C) — 275 (135)

Dielectric Strength v/mil (kV/mm) D149-97 535 (21.1)

Tensile Modulus, D412-98@ 100% psi (MPa) 410 (2.8)@ 300% psi (MPa) 800 (5.5)



Features/Benefits• Superior Weathering• Abrasion Resistant• Outstanding Flexural

Fatigue Resistance• Wide Temperature Range

(-75˚F to 275˚F)• Low Gas Permeability

Versus Rubber Tubing• Ozone* and UV Light Resistant

Typical Applications• Soap and Disinfectant Dispensing• Printing Ink Transfer• Caustic Dispensing• Plating and Etching Chemicals• Wastewater Sampling• Glass and Window Wash Systems• Vacuum Pumps• Cable Insulation• Abrasion-Resistant Sleeving

*300pphm

FORMULATION A-60-G Outlasts and outperformsneoprene, EPDM and otherspecialty rubber tubings

NORPRENE® Industrial Grade Tubing

For extended service in a wide variety of applications, Norprene® IndustrialGrade Tubing outlasts virtually all multi-service rubber tubings.

From the Makers of TYGON®

High Performance Alternative to General Purpose Rubber TubingNorprene® Industrial Grade Tubing outperforms neoprene, EPDM and other general-purpose tubings in test after test and application after application. It will not weaken orcrack after years of exposure to heat and ozone, providing long service in a wide range ofapplications such as gasketing, abrasion-resistant sleeving and cable insulation.Performance formulated for on-the-job reliability, Norprene® handles temperatures from -75˚F (-60˚C) to 275˚F (135˚C), allowing the use of one material with a broad range oftemperatures. It is heat sealable and can be joined without fittings. It also has excellentresistance to inorganic (acids and bases) fluids.

Unequalled Life in Peristaltic Pump ApplicationsPeristaltic pumps are used in a wide range of markets and applications. The universalrequirement common to these applications is the ability of the tubing to withstand theconstant high flexural fatigue exerted by the pump rollers. Norprene® outlasts andoutperforms virtually all other general service tubing in peristaltic pump applications due to its high flexural fatigue strength. (For additional details on peristaltic pump tubings referto the comprehensive Saint-Gobain Performance Plastics Peristaltic Pump Tubing section atwww.tygon.com.)

Ideal for Use in Vacuum SystemsNorprene® Industrial Grade Tubing is available in standard vacuum sizes that will withstanda full vacuum (29.9" [759mm] of mercury) at 73˚F (23˚C). Unlike typical rubber vacuumtubing, Norprene® resists the cracking and aging that are frequent causes of vacuum tubingfailure.

Available in Food Grade and Reinforced Pressure FormulationsThe unique properties of Norprene® tubing make it desirable for use in many foodprocessing applications. For these applications, always specify Norprene® Food ProcessTubing Formulation A-60-F.

Where elevated pressure capabilities are required, Norprene® Pressure Tubing FormulationA-60-F I.B. is available to withstand up to five times the pressure of non-reinforcedNorprene® tubing. (Refer to the Saint-Gobain Performance Plastics data page for additionalinformation on these select tubing products.)


PerformanceChemical Tested Norprene® Neoprene

20% Ammonium Hydroxide Excellent Good

10% Sodium Hydroxide Excellent Fair

50% Sulfuric Acid Excellent Excellent

90% Sulfuric Acid Fair Failed

Methanol Excellent Excellent

37% Hydrochloric Acid Excellent Fair

Ethanol Good Good

50% Ethylene Glycol Excellent Excellent

Water: 28 days @ 220˚F Excellent Fair

Air: 7 days @ 275˚F Good Failed

Ozone: 100pphm, 40˚C, 28 days Excellent Fair

Fatigue Resistance 750,000 cycles – 2,000 cycles –Ross Flex @ 100CPM 1 inch cut growth 0.1 inch cut growth

Hot Air Heat Aging, +22% tensile,7 days @ 275˚F +9% elongation Crumbled

Hot Air 7 days @ 220˚F +15% tensile, -2% tensile,+14% elongation -75% elongation

Typical Environmental Resistance

Ozone, 300pphm Excellent Good

Weather (U.V.)* Excellent-Good Good

Acids Excellent Good

Alkalis Excellent Good

Lubricating Oils Fair Fair

Gas Permeability Fair Good-FairSaint-Gobain Performance Plastics2664 Gilchrist RoadAkron, OH 44305Tel: 800-798-1554Tel: (330) 798-9240Fax: (330) 798-6968


NORPRENE® A-60-G Inventoried Sizes

NORPRENE™ is a Saint-Gobain Performance Plastics registered trademark.

©2005 Saint-Gobain Performance Plastics CorporationFLS-3215-2.5M-0105-SGCS

Unless otherwise noted, all tests were conducted at room temperature (73˚F). Values shownwere determined on 0.075" thick extruded strip or 0.075" thick molded ASTM plaques ormolded ASTM durometer buttons.

NORPRENE® A-60-G Typical Physical Properties




Color - Black





Water Absorption, D570-98 0.30% 24 hrs. @ 23˚C

Compression Set Constant Deflection, D395-98 27% @ 158˚F (70˚C) for 22 hrs. Method B

Brittleness By Impact Temp., ˚F (˚C) D746-98 -75 (-60)

Maximum Recommended Operating - 275 (135)Temperature*, ˚F (˚C)


Tensile Modulus, D412-98@ 100% Elongation, psi (MPa) 410 (2.8)@ 300% Elongation, psi (MPa) 800 (5.5)


www.tygon.com

*Working pressures arecalculated at a 1:5 ratiorelative to burst pressureusing ASTM D1599.**Vacuum Tubing Sizes

The values listedfor working andburst pressuresare derived fromtests conductedunder controlledlaboratoryconditions. Manyfactors willreduce thetubing’s ability to withstandpressuresincludingtemperature,chemical attack,stress, pulsationand theattachment tofittings. It isimperative thatthe user conducttests simulatingthe conditions ofthe applicationprior tospecifying thetubing for use.

Saint-Gobain Wall Length Minimum Max. Working Vacuum Rating,Part I.D. O.D. Thickness Bend Radius Pressure (psi)* In. of Mercury

Number (inches) (inches) (inches) (feet) (inches) at 73°F at 180˚F at 73°F at 180˚F

AFL00003 1/16 3/16 1/16 50 1/4 34 21 29.9 29.9

AFL00007 1/8 1/4 1/16 50 1/2 19 12 29.9 29.9

AFL00008** 1/8 3/8 1/8 50 1/2 34 21 29.9 29.9

AFL00012 3/16 5/16 1/16 50 3/4 13 8 29.9 29.9

AFL00013 3/16 3/8 3/32 50 1/2 19 12 29.9 29.9AFL00015** 3/16 9/16 3/16 50 1/4 34 21 29.9 29.9AFL00017 1/4 3/8 1/16 50 7/8 10 6 29.9 15.8AFL00018 1/4 7/16 3/32 50 3/4 15 9 29.9 29.9AFL00019 1/4 1/2 1/8 50 3/4 19 12 29.9 29.9

AFL00020** 1/4 5/8 3/16 50 1/2 26 16 29.9 29.9AFL00022 5/16 7/16 1/16 50 1-1/4 8 5 20.2 10.1AFL00023 5/16 1/2 3/32 50 1.0 12 7 29.9 25.0

AFL00026** 5/16 13/16 1/4 50 1/2 28 17 29.9 29.9AFL00027 3/8 1/2 1/16 50 1-3/8 7 4 14.1 7.0AFL00028 3/8 9/16 3/32 50 1-1/2 10 6 29.9 15.0AFL00029 3/8 5/8 1/8 50 1-1/8 13 8 29.9 27.7AFL00032 7/16 9/16 1/16 50 2-1/4 6 4 5.0 0.0AFL00036 1/2 5/8 1/16 50 3.0 6 3 15.0 0.0AFL00037 1/2 11/16 3/32 50 2-1/4 8 5 20.0 10.0AFL00038 1/2 3/4 1/8 50 1-1/8 10 6 29.6 15.6AFL00045 5/8 13/16 3/32 50 3-1/4 7 4 10.0 5.0AFL00046 5/8 7/8 1/8 50 2-3/4 8 5 20.0 9.9AFL00053 3/4 1 1/8 50 3-1/2 7 4 13.9 6.9AFL00062 1 1-1/4 1/8 50 5.0 6 3 5.0 5.0

The following information is based on tests conducted for 28 days at 73˚F, unless otherwisenoted. The information is based on reliable test results. Use as a guide only, taking into accountsuch variables as temperature and fluid contamination in your own application.

Thesecomparisonsare based onpublishedmaterialproperties andare notguaranteed forall samples orapplications.Actualperformancewill vary,depending onfinished partdesign andrequirements.

*UVenvironmentalresistanceproperties areinfluenced byadditives.

HOW NORPRENE® Tubing Compares with Neoprene Tubing


From the makers of Tygon® tubingLeading today.Shaping tomorrow.

Features/Benefits• Longflexlifeinperistalticpumps• Temperaturerangeof-75°Fto165°F• Superiorchemicalresistance• Plasticizer-freebore• MeetsFDAcriteriaforfoodcontact• Resistsabsorption/adsorption ofaqueousfluids• Virtuallyunaffectedbychemical sanitizersandcleaners

Typical Applications• Inkandsolventproduction• Batteryacidfilling• Specialtychemicalproduction/ processing• Diagnostictesting• Sensitivefluidtransfer

Unique Combination of PropertiesNorprene®ChemicalTubingisahighperformanceco-extrudedproductspecificallyformulatedtoprovideanidealcombinationofchemicalresistanceandpumplife.Itsinertultra-smoothplasticizer-freeboreresiststheabsorption/adsorptionofaqueousfluidswhiletheNorprene®outerjacketprovideslongflexlifeinperistalticpumps.Norprene®ChemicalTubingisanexcellentchoiceforsensitivefluidtransferapplications.

Outstanding Chemical ResistanceTheinnerlinerofNorprene®ChemicalTubingsignificantlyincreasesthechemicalresistanceandallowsforabroaderrangeofusability.Thetubingisvirtuallyunaffectedbyacids,bases,salts,ketonesandalcohols(see“RelativeChemicalResistanceProperties”chartonbackofsheet)allowingitsuseinawiderangeofchemicalapplicationswithouttheuseofmultipletubings.

Superior Pump LifeTheouterjacketofNorprene®ChemicalTubingisextremelyflexible,expandingthepumplifeofthetubingandreducingdowntimeduetopumptubingfailure(see“ComparativePeristalticPumpTubingLife”chartonbackofsheet).

Additional BenefitsNorprene®ChemicalTubingcomplieswithFDA21CFR,177.1520criteriaandisapplicableforfoodcontactapplications.Itisvirtuallyunaffectedbymostcommercialsanitizersandcleanersandcanbeautoclavedforuptofivecycletimeswithoutaffectingitsoverallservicelife.

NORPRENE®ChemicalTubing

Norprene® Chemical Tubing is designed for use in applications where extractables are a concern.

NEW


Saint-GobainPerformancePlastics2664GilchristRoadAkron,OH44305Tel:800-798-1554Tel:(330) 798-9240Fax:(330) 798-6968

IMPORTANT: Itistheuser’sresponsibilitytoensurethesuitabilityandsafetyofSaint-GobainPerformancePlasticstubingforallintendeduses.Laboratoryandclinicaltestsmustbeconductedinaccordancewithapplicableregulatoryrequirementsinordertodeterminethesafetyandeffectivenessforuseoftubinginanyparticularapplication.Foraperiodof6monthsfromthedateoffirstsale,Saint-GobainPerformancePlasticsCorporationwarrantsthisproducttobefreefromdefectsinmaterialsandworkmanship.Ouronlyobligationwillbetoreplaceanyportionprovingdefectiveoratouroptiontorefundthepurchasepricethereof.Userassumesallotherrisk,ifany,includingtheriskofinjury,lossordamage,directorconsequential,arisingoutoftheuse,misuseorinabilitytousethisproduct.THISWARRANTYISINLIEUOFTHEWARRANTIESOFMERCHANTABILITY,FITNESSFORPARTICULARPURPOSE,ANDALLOTHERWARRANTIES,EXPRESSEDORIMPLIED.Nodeviationisauthorized.Saint-GobainPerformancePlasticsCorporationassumesnoobligationsorliabilityforanyadvicefurnishedbyit,orforresultsobtainedwithrespecttothoseproducts.Allsuchadviceisgivenandacceptedatthebuyer’srisk.

NORPRENE® is a Saint-gobain Performance Plastics registered trademark.

©2007Saint-GobainPerformancePlasticsCorporationFLS3287-2.5M-0307-SGCS

Unless otherwise noted, all tests were conducted at room temperature (73˚F). Values shown were determined on 0.075" thick extruded strip or 0.075" thick molded ASTM plaques or molded ASTM durometer buttons.

noRPREnE® Chemical Tubing Typical Physical Properties Property ASTMMethod ValueorRating

DurometerHardnessShoreA,15 Sec D2240 61

Color — Cream

TensileStrengthpsi(MPa) D412 1,000 (6.9)

UltimateElongation,% D412 375

TearResistancelb-f/inch(kN/m) D1004 120 (21)

SpecificGravity D792 0.98

WaterAbsorption,% D570 ‹0.01 24hrs.@23˚C

CompressionSetConstantDeflection,% D395 30 @158˚F(70˚C)for22hrs. MethodB

BrittlenessByImpactTemp.,˚F(˚C) D746 -75 (-60)

MaximumRecommended — 165 (74) Temperature,˚F(˚C)

www.tygon.com

The table below depicts hours until failure of 1/4" ID x 3/8" OD tubing. In each case, a 3-roller pump head operating at 600 rpm under room temperature (73˚F) conditions was utilized. Tubing failure is measured in hours of use prior to rupture.

Comparative Peristaltic Pump Tubing Life

The performance of tubing in peristaltic pumping applications is affected by the conditions of use and equipment utilized, along with size and wall thickness of the tubing tested. The data above is presented for information only and should not be utilized for specification purposes.

0 50 500 10000 100 200 300 400 500 600

Norprene®ChemicalTubing

PVCTubing

SiliconeTubing

10psibackpressure

500hours800hours

60hours65hours

50hours75hours

0psibackpressure

E = Excellent F = Fair U = Unsatisfactory *All tests conducted at room temperature

Relative Chemical Resistance Properties

Tubing AcidsBases Conc. Med. Weak Conc. Med. Weak Salts Alcohols KetonesNorprene®ChemicalTubing F E E E E E E E FFluoroelastomers E E E U F F E F UUrethane U U U U F F F U UPVC F E E E E E E F UThermoplasticRubber U F F F E E E F UNeoprene U F E E E E E E UNitrileRubber F F E U E E E E USilicone U U U U F F F F UEVA U F E F E E E E U


Thevalueslistedforworkingandburstpressuresarederivedfromtestsconductedundercontrolledlaboratoryconditions.Manyfactorswillreducethetubing’sabilitytowithstandpressuresincludingtemperature,chemicalattack,stress,pulsationandtheattachmenttofittings.Itisimperativethattheuserconducttestssimulatingtheconditionsoftheapplicationpriortospecifyingthetubingforuse.

Saint-gobain I.D. o.D. Wall Length Minimum Max. Suggested Vacuum Rating, Part (inches) (inches) Thickness (feet) Bend Radius Working Pressure at In. of Mercury number (inches) (inches) 73°F(psi)* 160°F(psi)* 73°F 160°F

AD300007 1/8 1/4 1/16 50 1/2 33 14 29.9 29.9

AD300012 3/16 5/16 1/16 50 1 29 10 29.9 29.9

AD300017 1/4 3/8 1/16 50 1-1/4 20 8 29.9 15.0

AD300027 3/8 1/2 1/16 50 2 14 5 25.0 5.0

AD300038 1/2 3/4 1/8 50 2-1/4 16 8 29.9 25.0

noRPREnE® Chemical Tubing Manufactured Sizes and Pressures


Formulation 2001

Features/Benefits• Plasticizer and oil free — does not

contaminate fluids• Superior flex life in peristaltic

pumps• Chemically resistant to a wide

range of fluids• Temperature resistant from -108°F

to 135°F• Clear for easy visual flow

monitoring• Meets FDA criteria for food contact

Typical Applications• Chemical transfer• Peristaltic pumps• Soap and detergent dispensing• Ink transfer• Water purification lines• Food and beverage• Analytical instruments• Ideal for condensers, incubators,

desiccators, gas and drain lines

Superior Performance in a Broad Range of ApplicationsTygon® Plasticizer Free Tubing is uniquely engineered to provide flexibility, chemicalresistance and extended pump life in a clear, plasticizer/oil free tubing product.It is ideal for a broad range of demanding applications including peristaltic pumpsystems, soap and detergent dispensing, ink transfer, water purification lines,food and beverage and chemical transfer.

Outperforms PVC in Chemical ResistanceTygon® Plasticizer Free Tubing is resistant to a wide range of fluids that typically destroy PVC products. Its chemical resistance allows it to be used in applications withaggressive chemicals such as polar solvents, benefiting the user with less downtimeand tubing changes. Tygon® Plasticizer Free Tubing yields a longer service life and doesnot degrade over time, unlike other flexible tubing products (see “Relative ChemicalResistance Chart” on back of sheet).

Additional Product FeaturesUpon incineration, many tubing products release hazardous by-products such ashydrogen chloride gas, but when properly incinerated, Tygon® Plasticizer Free Tubingdoes not. Since it contains no plasticizers or oils, Tygon® Plasticizer Free Tubing will not yield any taste, which makes it an ideal choice for food and beverage applications withstrict taste requirements and will help ensure accurate results from analytical instrumenttests. Tygon® Plasticizer Free Tubing fully complies with FDA 21 CFR, 177.2600 criteria.

TYGON® Plasticizer Free Tubing

Tygon® Plasticizer Free Tubing resists chemical attack and is a clear, flexible alternative to PVC.




TYGON® 2001 Manufactured Sizes and Pressures

TYGON® is a Saint-Gobain Performance Plastics registered trademark.


Unless otherwise noted, all tests were conducted at room temperature (73˚F). Values shownwere determined on 0.075" thick extruded strip or 0.075" thick molded ASTM plaques or moldedASTM durometer buttons.

E = Excellent F = Fair U = Unsatisfactory *All tests conducted at room temperature

TYGON® 2001 Typical Physical Properties

Relative Chemical Resistance Properties

Saint-Gobain Wall Minimum Max. Working Vacuum Rating,Part I.D. O.D. Thickness Length Bend Pressure In. of Mercury

Number (inches) (inches) (inches) (feet) Radius (inchces) at 73°F (psi)* at 73°FAE300003 1/16 3/16 1/16 50 1/4 45 29.9AE300007 1/8 1/4 1/16 50 1/2 30 29.9AE300012 3/16 5/16 1/16 50 1/2 22 29.9AE300017 1/4 3/8 1/16 50 1 17 29.9AE300022 5/16 7/16 1/16 50 1-1/2 14 25.0AE300027 3/8 1/2 1/16 50 2 12 15.0AE300038 1/2 3/4 1/8 50 1-1/2 16 29.9AE300046 5/8 7/8 1/8 50 2-1/2 13 25.0AE300053 3/4 1 1/8 50 3 11 15.0AE300064 1 1-3/8 3/16 50 3-3/4 13 17.0



Color - Clear



Tear Resistance lb-f/inch (kN/m) D1004-03 140 (24.5)


Water Absorption, % D570-98 0.0424 hrs. @ 23˚C

Compression Set Constant Deflection, % D395-03 40@ 158˚F (70˚C) for 22 hrs. Method B


Maximum Recommended Operating - 135 (57)Temperature, ˚F (˚C)

Low Temp Flexibility, °F (°C) D380.94 -100 (-73)


Tensile Modulus,@ 100% Elongation, psi (MPa) D412-98 240 (1.65)


The table below depicts hours until failure of 1/4" ID x 3/8" ODtubing. In each case, a 3-roller pump head operating at 600 rpmunder room temperature (73˚F). Tubing failure is measured in hoursof use prior to rupture.


Tubing Acids BasesConc. Med. Weak Conc. Med. Weak Salts Alcohols Ketones

Tygon® 2001 F E E F E E E E FFluoroelastomers E E E U F F E F UUrethane U U U U F F F U UPVC F E E E E E E F UThermoplastic Rubber U F F F E E E F UNeoprene U F E E E E E E UNitrile Rubber F F E U E E E E USilicone U U U U F F F F UEVA U F E F E E E E U

The performance of tubing in peristaltic pumping applications is affected by the conditions of use and equipment utilized,along with size and wall thickness of the tubing tested. The dataabove is presented for information only and should not be utilizedfor specification purposes.

0 50 1000 100 200 300 400 500 600

Tygon® 2001Tubing

Typical PVCTubing

100 hours

www.tygon.com

0 psi back pressure

*Working pressures arecalculated at a 1:5 ratio relative to burst pressureusing ASTM D1599.

50 hours

The values listed for working and burst pressures are derived from tests conducted under controlled laboratory conditions. Many factors willreduce the tubing’s ability to withstand pressures including temperature, chemical attack, stress, pulsation and the attachment to fittings.It is imperative that the user conduct tests simulating the conditions of the application prior to specifying the tubing for use.


Tygon® 2375 provides the highest degree of chemical resistance in clear, flexible tubing.

Unequaled Chemical ResistanceUntil now, many applications for clear flexible tubing were limited due to chemical attack from the fluid being transported. Tygon® 2375 Ultra Chemical Resistant Tubing broadens the range of usability with its expanded chemical resistance. The tubing is virtually unaffected by acids, bases, ketones, salts and alcohols (see Relative Chemical Resistance Properties chart on other side).

Environmentally FriendlyTygon® 2375 Ultra Chemical Resistant Tubing is unique when it comes to disposing. When properly incinerated, it does not release hazardous and corrosive hydrochloride gas, which contributes to acid rain.

Non-DEHP and Plasticizer FreeTygon® 2375 Ultra Chemical Resistant Tubing is entirely free of plasticizers, eliminating fluid contamination resulting from leaching plasticizers, a common occurrence with other flexible tubing.

Longer LifeTygon® 2375 has improved the maximum working pressure by 30-50% compared to 2075. It will not embrittle or crack prematurely due to extraction of plasticizer, thus providing a longer service life.

Formulation 2375 (replaces tygon® 2075) Provides the highest degree of chemical resistance in clear, flexible tubing

Features/Benefits• Improved pressure rating by 30-50%• Outstanding chemical resistance• Non-DEHP for high purity• Plasticizer-free for low extractables • Safer disposal – releases no harmful

and corrosive hydrochloride gas• Smoother inner surface – provides

better flow and inhibits particulate build-up

• Low sorption – to minimize cross contamination

• Clear tubing for easier and better observation

• Industry compliances: FDA, EU Food Contact 2002/72/EC, NSF 51 food standards

• REACh

Typical Applications• Chemical transfer systems• Transfer lines for chemical analyzers• Detergent supply lines• Battery acid filling• Ink and printing fluid dispensing• Industrial X-ray processing• Power generation sampling

and drain lines• Paint and solvent production• Hazardous materials handling• Wine dispensing

TYGON® Ultra Chemical Resistant Tubing


Tygon® is a registered trademark.

IMPORTANT: It is the user’s responsibility to ensure the suitability and safety of Saint-Gobain Performance Plastics tubing for all intended uses. Laboratory and clinical tests must be conducted in accordance with applicable regulatory requirements in order to determine the safety and effectiveness for use of tubing in any particular application.For a period of 6 months from the date of first sale, Saint-Gobain Performance Plastics Corporation warrants this product to be free from defects in materials and workmanship. Our only obligation will be to replace any portion proving defective or at our option to refund the purchase price thereof. User assumes all other risk, if any, including the risk of injury, loss or damage, direct or consequential, arising out of the use, misuse or inability to use this product. THIS WARRANTY IS IN LIEU OF THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE, AND ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED. No deviation is authorized.Saint-Gobain Performance Plastics Corporation assumes no obligations or liability for any advice furnished by it, or for results obtained with respect to those products. All such advice is given and accepted at the buyer’s risk.

Saint-Gobain Performance Plastics 2664 Gilchrist Road Akron, OH 44305 Tel: 800-798-1554 Tel: (330) 798-9240 Fax: (330) 798-6968

FLS-3151-PDF-0611-SGCS www.tygon.com ©2011 Saint-Gobain Performance Plastics Corporation

Tygon® 2375 Manufactured Sizes and Pressures

Saint-Gobain Part Number

I.D. (inches)

O.D. (inches)

Wall Thickness (inches)

Max. Working Pressure at 73˚F (psi)*

Minimum Bend Radius

(inches)

Vacuum Rating, In. of Mercury

at 73˚FAJK00002 1/16 1/8 1/32 40.0 1/4 29.9AJK00003 1/16 3/16 1/16 65.0 1/8 29.9AJK00004 3/32 5/32 1/32 25.0 1/4 29.9AJK00007 1/8 1/4 1/16 40.0 1/4 29.9AJK00009 5/32 7/32 1/32 20.0 1/4 29.9AJK00012 3/16 5/16 1/16 30.0 1/2 29.9AJK00017 1/4 3/8 1/16 25.0 3/4 29.9AJK00022 5/16 7/16 1/16 20.0 1-1/4 29.9AJK00027 3/8 1/2 1/16 17.0 1-1/2 20.0AJK00029 3/8 5/8 1/8 25.0 1-1/8 29.9AJK00038 1/2 3/4 1/8 25.0 1-1/2 29.9AJK00046 5/8 7/8 1/8 20.0 2-1/2 29.9AJK00053 3/4 1 1/8 17.0 2-3/4 20.0AJK00064 1 1-3/8 3/16 19.0 3-1/4 25.0


The values listed for working pressures are derived from tests conducted under controlled laboratory conditions. Many factors will reduce the tubing’s ability to withstand pressures including temperature, chemical attack, stress, pulsation and the attachment to fittings. It is imperative that the user conduct tests simulating the conditions of the application prior to specifying the tubing for use.

Tygon® 2375 Typical Physical Properties Relative Chemical Resistance Properties*

Tubing Acids Bases

Salts Alcohols KetonesConc. Med. Weak Conc. Med. WeakTygon® 2375 F E E E E E E E FFluoroelastomers E E E U F F E F UUrethane U U U U F F F U UPVC F E E E E E E F UThermoplastic Rubber U F F F E E E F UNeoprene U F E E E E E E UNitrile Rubber F F E U E E E E USilicone U U U U F F F F UEVA U F E F E E E E U

E = Excellent F = Fair U = Unsatisfactory

*All tests conducted at room temperatures.

PropertyASTM

MethodValue or Rating

Durometer Hardness Shore A, 15 Sec D2240 75

Color – ClearTensile Strength psi (MPa) (at break) D412 1900 (13.1)

Ultimate Elongation, % D412 850Tear Resistance lb-f/inch (kN/m) D1004 240 (42.0)

Specific Gravity D792 0.9Water Absorption, % 24 hrs. @ 23˚C D570 <0.01

Compression Set Constant Deflection, % @ 158˚F (70˚C) for 22 hrs.

D395 Method B 100

Brittleness By Impact Temp., ˚F (˚C) D746 -103 (<-75)

Maximum Recommended Operating Temp., ˚F (˚C) – 130 (54)

Low Temp. Flexibility, ˚F (˚C) – -103 (-75)Tensile Modulus, @ 100% Elongation, psi (MPa) D412 425 (2.9)

Tensile Set, 75% of Ultimate Elongation, % D412 300



Features/Benefits• Ultra-Smooth Inner Bore Reduces

Potential for Particle Entrapment

• Minimal Extractables HelpMaintain Fluid Integrity

• Documented Biocompatibility forSensitive Applications

• Excellent Fluid Flow Characteristics

• Fully Tested to ISO 10993 Standardsto Facilitate Validation Process

• Complete Inventory of Standard SizesAvailable, Including Metric Sizes

Typical Applications• Pharmaceutical and Cosmetic

Processing

• Medical Devices

• Cell Harvest and Media ProcessSystems

• Sterile Fill Lines

• Water for Injection (WFI) Transfer

• Chemistry and Blood Analyzers

• Liquid Chromatography

TYGON® 3350 Sanitary Silicone Tubingbiopharmaceutical products

“Engineered” Ultra-Smooth Inner SurfaceThe inner surface of TYGON® 3350 silicone tubing has been designed to reduce the riskof particle entrapment and microscopic build-up during fluid transfer. In-house analysisof the inner surface of TYGON 3350 silicone tubing compared to other silicone tubingshows that it is up to three times smoother. In addition, when compared to stainlesssteel tubing, TYGON 3350 tubing exhibits a smoother surface by a factor of up to 40.

A smoother fluid path also helps to facilitate complete sanitation of a fluid transfersystem. Even in repeat use applications, TYGON 3350 silicone tubing may prevent residuebuild-up, aiding in complete cleaning and sterilization.

Additionally, the smooth inner surface of the TYGON 3350 silicone tubing improves fluidflow characteristics by reducing surface area.

Lower Extractables and Superior BiocompatibilityTYGON 3350 silicone tubing is compounded to meet the most demanding requirementsof biocompatibility. In-house extractability tests have shown that TYGON 3350 siliconetubing has a low extractable content. Lower extractables help to maintain the purity oftransported fluids in sensitive applications.

Platinum-cured TYGON 3350 silicone tubing complies fully with the requirements of theUSP Class VI Criteria and is entirely non-toxic, non-hemolytic and non-pyrogenic.Additionally, TYGON 3350 silicone tubing meets 3-A Sanitary Standards, FDA 21 CFR Part177.2600 Criteria and NSF 51 Standard. TYGON 3350 silicone tubing also complies with theISO 10993 guidelines for contact with blood (or other body fluids and tissue) for up to 30days as listed in the FDA GP-95.

The platinum-curedsilicone tubing with an ultra-smoothinner surface forsanitary transfer ofsensitive fluids

In a comparison of images of the inner surfaces of TYGON® 3350 silicone tubing and two competitors(captured at 500 x magnification with an electron scanning microscope), TYGON clearly exhibits superiorsmoothness. As a result, potential for particle entrapment is greatly reduced.

Competitor A TYGON® 3350 Competitor B


Saint-Gobain Performance Plastics3910 Industrial DriveBeaverton, MI 48612Tel: (989) 435-9533Tel: (888) 387-0067Fax: (989) 435-2355

TYGON® 3350 Typical Physical Properties

biopharmaceutical productsCome through clean.SM


Durometer Hardness D2240-91 50Shore A, 15 SecColor — TranslucentTensile Strength D412-92 1,450 (10)psi (MPa)Ultimate Elongation, % D412-92 770Tear Resistance D624-91 200 (35)lb-f/inch (kN/m) Die BSpecific Gravity D792-91 1.14Water Absorption, % D570-81 0.1124 hrs. @ 23°CCompression Set D395-89Constant Deflection, % Method B@ 158°F (70°C) for 22 hrs. 7@ 347°F (175°C) for 22 hrs. 35Brittleness by Impact D746-79 -112 (-80)Temp., °F (°C)Maximum Recommended — 400 (204)Operating Temp.,°F (°C)Dielectric Strength D149-93 480v/mil (kV/mm) (19.0)Tensile Modulus, @ 200% D412-92 280 (1.9)Elongation, psi (MPa)

Sterilization of TYGON® 3350Autoclavable — Steam 30 minutes at 15 psi (250°F).Gas — Ethylene Oxide.Radiation — Radiation up to 2.5 MRad.

TYGON® 3350 Toxicological ProfileThe biocompatibility of TYGON 3350 has been tested and found to be non-toxic in the following test protocols:

• USP Systematic Toxicityand Intracutaneous Reactivity

• USP Intramuscular Implant

• Cytotoxicity• Blood Compatibility

• USP Physico Chemical Tests

• USP Pyrogen Test

Unless otherwise noted, all tests were conducted at room temperature (73ºF [22.8ºC]).Values shown were determined on 0.075" thick molded ASTM plaques or molded ASTM duro-meter buttons.

TYGON® 3350 Tubing Inventory SizesMinimum Max. Suggested Vacuum

Wall Bend Working Rating In. of Part I.D. O.D. Thickness Length Radius Pressure at Mercury at

Number (inches) (inches) (inches) (feet) (inches) 73°F(psi)* 320°F(psi)* 73°F 320°F

ABW00001 1/32 3/32 1/32 50 1/8 22 21 29.9 29.9ABW00002 1/16 1/8 1/32 50 1/4 14 13 29.9 29.9ABW00003 1/16 3/16 1/16 50 1/4 22 21 29.9 29.9ABW00004 3/32 5/32 1/32 50 1/4 11 10 29.9 29.9ABW00005 3/32 7/32 1/16 50 1/4 18 16 29.9 29.9ABW00006 1/8 3/16 1/32 50 3/8 9 8 20.0 15.0ABW00007 1/8 1/4 1/16 50 1/2 14 13 29.9 29.9ABW00009 5/32 7/32 1/32 50 3/4 7 6 10.0 10.0ABW00011 3/16 1/4 1/32 50 1 7 6 5.0 5.0ABW00012 3/16 5/16 1/16 50 1/2 11 10 25.0 25.0ABW00013 3/16 3/8 3/32 50 3/8 14 13 29.9 29.9ABW00014 3/16 7/16 1/8 50 3/8 18 16 29.9 29.9ABW00016 1/4 5/16 1/32 50 1-1/2 5 4 1.0 1.0ABW00017 1/4 3/8 1/16 50 3/4 9 8 15.0 15.0ABW00018 1/4 7/16 3/32 50 5/8 12 11 29.9 29.9ABW00019 1/4 1/2 1/8 50 5/8 14 13 29.9 29.9ABW00022 5/16 7/16 1/16 50 1-1/4 7 6 5.0 5.0ABW00023 5/16 1/2 3/32 50 5/8 10 9 20.0 20.0ABW00027 3/8 1/2 1/16 50 1-1/2 9 8 5.0 5.0ABW00028 3/8 9/16 3/32 50 1 11 10 20.0 15.0ABW00029 3/8 5/8 1/8 50 1 12 11 29.9 29.9ABW00032 7/16 9/16 1/16 50 1-1/2 4 3 2.0 2.0ABW00033 7/16 5/8 3/32 50 1-3/4 8 7 10.0 10.0ABW00036 1/2 5/8 1/16 50 3 5 4 1.0 1.0ABW00037 1/2 11/16 3/32 50 1-3/4 7 6 5.0 5.0ABW00038 1/2 3/4 1/8 50 1-1/2 9 8 15.0 15.0ABW00045 5/8 13/16 3/32 50 3 6 5 5.0 0.0ABW00046 5/8 7/8 1/8 50 2-1/2 7 6 10.0 10.0ABW00053 3/4 1 1/8 50 2-1/2 7 6 1.0 1.0ABW00062 1 1-1/4 1/8 50 5 5 4 0.0 0.0ABW00069 1-1/4 1-1/2 1/8 50 6 5 4 0.0 0.0ABW00074 1-1/2 2 1/4 50 7 6 5 1.0 1.0

TYGON® is a registered trademark.

TYGON TUBING IS NOT INTENDEDFOR USE AS AN IMPLANT MATERIAL

TYGON® 3350 Metric SizesMinimum Max. Suggested Vacuum

Wall Bend Working Rating In. of Part I.D. O.D. Thickness Length Radius Pressure at Mercury at

Number (mm) (mm) (mm) (m) (inches) 73°F(psi)* 320°F(psi)* 73°F 320°F

ABW1S1501 1 2 .5 15 3/8 9 8 29.9 29.9ABW1S1502 2 4 1 15 1/2 9 8 29.9 29.9ABW1S1503 5 8 1.5 15 3/4 7 6 25.0 25.0ABW1S1504 6 9 1.5 15 7/8 6 5 15.0 15.0ABW1S1505 7 10 1.5 15 1 6 5 10.0 10.0ABW1S1506 8 12 2 15 1-1/2 6 5 15.0 15.0ABW1S1507 10 14 2 15 2 5.5 4.5 5.0 5.0ABW1S1508 12 16 2 15 2-1/2 5 4 5.0 5.0ABW1S1509 18 24 3 15 3 5 4 5.0 5.0

The values listed for working and burst pressures are derived from testsconducted under controlled laboratory conditions. Many factors will reducethe tubing’s ability to withstand pressures, including temperature, chemicalattack, stress, pulsation and the attachment to fittings. It is imperative thatthe user conduct tests simulating the conditions of the application prior tospecifying the tubing for use.

*Safety factor of 5 to 1 ratio of burst pressure to working pressure.

IMPORTANT: It is the user’s responsibility to ensure the suitability and safety of Saint-Gobain Performance Plastics tubing for all intended uses. Laboratory and clinical testsmust be conducted in accordance with applicable regulatory requirements in order to determine the safety and effectiveness for use of tubing in any particular application.For a period of 6 months from the date of first sale, Saint-Gobain Performance Plastics Corporation warrants this product to be free from defects in materials and workmanship. Our onlyobligation will be to replace any portion proving defective, or at our option, to refund the purchase price thereof. User assumes all other risk, if any, including the risk of injury, loss or damage,direct or consequential, arising out of the use, misuse, or inability to use, this product. THIS WARRANTY IS IN LIEU OF THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE,AND ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED. No deviation is authorized.Saint-Gobain Performance Plastics Corporation assumes no obligations or liability for any advice furnished by it, or for results obtained with respect to those products. All such advice isgiven and accepted at the buyer's risk.

www.biopharm.saint-gobain.com ©2003 Saint-Gobain Performance Plastics CorporationFLS-3092-1.5M-0403-SGCS


Features/Benefits• Consistently Smooth Inner Surface

Limits Particle Entrapment

• Platinum Cured to MinimizeExtractables

• Tough Braid Reinforcement PermitsUse Under Elevated WorkingPressures

• Withstands Repeated CIP and SIPCleaning and Sterilization

• Custom Color Striping Available

Typical Applications• Sterile Filling

• Media Dispensing

• Vaccine Manufacturing

• Bioreactor Process Lines

• Water Purification Systems

• Food and Dairy Processing

• Diagnostic Test ProductManufacturing

• Sanitary Fitting Assembly

TYGON® 3370 I.B. Braid-Reinforced Silicone Hose biopharmaceutical products

Designed to Maintain Fluid Purity Under PressureBraid reinforced for increased pressure resistance, TYGON® 3370 I.B. silicone hose isfrequently specified in the most demanding applications requiring sanitary transfer offluids. Its smooth inner surface reduces the risk of particle entrapment and inhibitsmicroscopic bacterial build-up. Cleaning and sterilization cycles also may become moreeffective from this smooth inner surface by helping to prevent excessive residue build-up during use. Additionally, an improvement in fluid flow characteristics may occurfrom the reduced surface area and lowered absorption of fluids to the wall.

TYGON® 3370 I.B. can easily withstand repeated SIP and CIP cleaning and sterilizationcycles, making it ideal for repeat-use applications. Its flexibility, durability, chemical andtemperature resistance provide a unique combination of characteristics required inmany pharmaceutical, biotechnology, laboratory, food, beverage, cosmetic,environmental, and industrial applications.

Lower Extractables and Exceptional BiocompatibilityTYGON® 3370 I.B. silicone hose is produced from a platinum curing process to meet themost demanding requirements of biocompatibility.

In-house extractability tests have shown that TYGON® 3370 I.B. hose has a lowextractable content. Lower extractables help to maintain the purity of transportedfluids in sensitive applications.

TYGON® 3370 I.B. hose complies fully with the requirements of the USP Class VI Criteriaand is entirely non-toxic, non-hemolytic and non-pyrogenic. Continued monitoring ofthe hose also ensures minimal bioburden levels are maintained. TYGON® 3370 I.B. hosealso meets 3-A Sanitary Standard No. 18-01 and FDA 21 CFR Part 177.2600 Criteria.TYGON® 3370 I.B. silicone hose has a masterfile with the U.S Food and DrugAdministration.

The smooth surface,platinum-cured siliconehose designed fortransferring high-purityfluid under pressure


Saint-Gobain Performance Plastics3910 Terry-DianeBeaverton, MI 48612Tel: (989) 435-9533Tel: (888) 387-0067Fax: (989) 435-2355

biopharmaceutical productsCome through clean.SM



TYGON® 3370 I.B. Hose Inventory SizesMinimum Max. Working Pressure Vacuum Rating

Part I.D. O.D. Bend Length at 73°F at 320°F In. of Mercury Number (inches) (inches) Radius (feet) (psi ) * (psi)* at 73°F at 320°F

AHJ001718 3/16 .443 1/4 50 170 125 29.9 29.9AHJ001719 1/4 .515 1/2 50 150 105 29.9 29.9AHJ001720 3/8 .687 3/4 50 130 95 29.9 29.9AHJ001721 1/2 .847 1-1/4 50 125 90 29.9 29.9AHJ001722 5/8 .980 1-1/2 50 110 80 29.9 29.9AHJ001671 3/4 1.150 2-1/4 50 100 75 29.9 29.9AHJ001724 1 1.390 3-1/2 50 70 50 15.0 10.0AHJ421725 1-1/4 1.636 5-3/4 25 55 40 10.0 5.0AHJ421726 1-1/2 1.900 6-3/4 25 40 30 5.0 0.0

TYGON® 3370 I.B. Toxicological ProfileThe biocompatibility of TYGON 3370 I.B. has been tested and found to be non-toxic in the following test protocols:

USP Systemic Toxicity and Intracutaneous ReactivityUSP Intramuscular ImplantCytotoxicityBlood CompatibilityUSP Physico Chemical Tests

TYGON® 3370 I.B. Sterilization MethodsAutoclavable — Steam 30 minutes at 15 psi (250°F)Gas — Ethylene OxideRadiation — Radiation up to 2.5 MRad

TYGON® 3370 I.B. Typical Physical PropertiesProperty ASTM Method Value or Rating

Durometer Hardness D2240 70Shore A, 15 SecColor — TranslucentTensile Strength D412 1,200 (8.3)psi (MPa)Ultimate Elongation, % D412 500Tear Resistance D624 250 (44)lb-f/inch (kN/m) Die BSpecific Gravity D792 1.18Water Absorption, % D570 0.1124 hrs. @ 23°CCompression Set D395Constant Deflection, % Method B@ 158°F (70°C) for 22 hrs. 3@ 347°F (175°C) for 22 hrs. 10Brittleness by Impact D746 -112 (-80)Temp., °F (°C)Maximum Recommended — 320 (160)Operating Temp.,°F (°C)Dielectric Strength D149 600v/mil (kV/mm) (24)Tensile Modulus, 200% D412 650 (4.5)psi (MPa)Tensile Set, % D412 25

TYGON HOSE IS NOT INTENDEDFOR USE AS AN IMPLANT MATERIIAL

The values listed for working and burst pressures are derived from testsconducted under controlled laboratory conditions. Many factors will reducethe hose’s ability to withstand pressures, including temperature, chemicalattack, stress, pulsation and the attachment to fittings. It is imperative thatthe user conduct tests simulating the conditions of the application prior tospecifying the hose for use.


www.biopharm.saint-gobain.com ©2006 Saint-Gobain Performance Plastics CorporationFLS-3181A-1M-1206-SGCS

Unless otherwise noted, all tests were conducted at roomtemperature (73°F). Values shownwere determined on 0.075" thick extruded strip or 0.075" thick molded ASTM plaques ormolded ASTM durometer buttons.

VerneretLa Mothe-Aux-Aulnaies89120 Charny, FranceTel: 33-386-637-878Fax: 33-386-637-777


Features/Benefits• Clear as glass for easy

visual monitoring of flow• Lightweight and flexible for

easy, quick installation• Broad chemical resistance • Non-wetting properties

allow easy cleaning and complete drainage

• Meets FDA, 3-A and NSF criteria

Typical Applications• Chemical processing• Appliance• Food and beverage• Metal finishing• Photoprocessing• Printing and publishing• Pharmaceutical• Cosmetic• Garden and

recreational equipment

FORMULATION B-44-3

Most Widely Specified Clear,Flexible Tubing

Versatile, High-Performance TubingTygon® Beverage Tubing is specially formulated for transferring a wide variety of beveragesincluding soft drinks, fruit juices, flavored teas and bottled water. In virtually all cases, Tygon®Beverage Tubing will not affect the taste or odor of product transferred through it, while itsexcellent non-wetting properties facilitate complete drainage and permit simple flush-cleaning.

Many of the unique properties inherent to Tygon® Beverage Tubing also apply to a wide variety ofcomplex applications, ranging from fine cosmetic production to the dispensing of water-basedprinting inks found in the publishing industry. The versatility and proven performance of Tygon®Beverage Tubing have made it today’s most widely specified clear, flexible plastic tubing.

Lightweight and FlexibleLight in weight and easy to handle, Tygon® Beverage Tubing can be put into service quickly. Itreadily bends to accommodate abrupt corners and obstructions, requiring a minimum of couplingsand fittings.

Its flexibility can save up to one-third the footage and much of the labor required to install rigidstainless steel or plastic piping.

Clear as GlassThe glass-like clarity of Tygon® Beverage Tubing allows the user to see product flow through it sovisual monitoring of flow is easy. This is particularly helpful in controlling or adjusting flow duringprocessing.

Meets FDA, NSF and 3-A CriteriaNon-toxic, taste-free and odor-free, Tygon® Beverage Tubing meets applicable regulatory standardsfor contact with food products.

Tygon® Beverage Tubing is NSF listed under Standard 51. This standard covers plastic materials andcomponents for use in food and beverage processing and dispensing equipment. It also meets FDA21 CFR, 175.300 criteria and 3-A Plastics Standard Criteria for use in handling foods and beverages.

Different Sizes Available Tygon® Beverage Tubing is available in sizes ranging from 1/16" I.D. to 3-1/2" O.D. – all through our nationwide network of general plastics distributors. Leave it to Saint-Gobain PerformancePlastics to provide that kind of convenience for you to select the right tubing for your application.

TYGON® Beverage Tubing

The most widely specified clear, flexible tubing, Tygon® Beverage Tubing is frequently chosen for itstaste- and odor-free characteristics



www.tygon.comIMPORTANT: It is the user’s responsibility to ensure the suitability and safety of Saint-Gobain Performance Plastics tubing for all intended uses. Laboratory and clinical tests must beconducted in accordance with applicable regulatory requirements in order to determine the safety and effectiveness for use of tubing in any particular application.For a period of 6 months from the date of first sale, Saint-Gobain Performance Plastics Corporation warrants this product to be free from defects in materials and workmanship. Ouronly obligation will be to replace any portion proving defective or at our option to refund the purchase price thereof. User assumes all other risk, if any, including the risk of injury, lossor damage, direct or consequential, arising out of the use, misuse or inability to use this product. THIS WARRANTY IS IN LIEU OF THE WARRANTIES OF MERCHANTABILITY, FITNESS FORPARTICULAR PURPOSE, AND ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED. No deviation is authorized.Saint-Gobain Performance Plastics Corporation assumes no obligations or liability for any advice furnished by it, or for results obtained with respect to those products. All such advice isgiven and accepted at the buyer’s risk.




TYGON® BEVERAGE TUBING IS NOT INTENDED FOR USE AS AN IMPLANT MATERIAL

Tygon® B-44-3 Tubing Typical Physical PropertiesTygon® B-44-3 Tubing Inventoried Sizes

Unless otherwise noted, all tests were conducted at room temperature(73˚F). Values shown were determined on 0.075" thick extruded strip or0.075" thick molded ASTM plaques or molded ASTM durometer buttons.


Saint-Gobain Wall Minimum Max. Working Vacuum RatingPart I.D. O.D. Thickness Length Bend Radius Pressure In. of Mercury

Number (inches) (inches) (inches) (feet) (inches) at 73°F (psi)* at 73°F

AAB00002 1/16 1/8 1/32 50 1/4 70 29.9AAB02002 1/16 1/8 1/32 100 1/4 70 29.9AAB04002 1/16 1/8 1/32 500 1/4 70 29.9AAB00003 1/16 3/16 1/16 50 1/8 108 29.9AAB00004 3/32 5/32 1/32 50 3/8 47 29.9AAB00005 3/32 7/32 1/16 50 1/4 78 29.9AAB00006 1/8 3/16 1/32 50 1/2 45 25.0AAB02006 1/8 3/16 1/32 100 1/2 45 25.0AAB00007 1/8 1/4 1/16 50 3/8 62 29.9AAB02007 1/8 1/4 1/16 100 3/8 62 29.9AAB04007 1/8 1/4 1/16 500 3/8 62 29.9AAB00009 5/32 7/32 1/32 50 3/4 31 16.0AAB00010 5/32 9/32 1/16 50 1/2 52 29.9AAB00011 3/16 1/4 1/32 50 1 34 11.0AAB00012 3/16 5/16 1/16 50 5/8 45 29.9AAB00013 3/16 3/8 3/32 50 1/2 62 29.9AAB00014 3/16 7/16 1/8 50 3/8 78 29.9AAB00016 1/4 5/16 1/32 50 1-5/8 28 6.0AAB00017 1/4 3/8 1/16 50 1 36 25.0AAB00018 1/4 7/16 3/32 50 3/4 49 29.9AAB00019 1/4 1/2 1/8 50 5/8 62 29.9AAB00022 5/16 7/16 1/16 50 1-3/8 30 16.0AAB00023 5/16 1/2 3/32 50 1 41 29.9AAB00024 5/16 9/16 1/8 50 7/8 52 29.9AAB00027 3/8 1/2 1/16 50 1-3/4 26 11.0AAB00028 3/8 9/16 3/32 50 1-3/8 36 25.0AAB00029 3/8 5/8 1/8 50 1-1/8 45 29.9AAB00034 7/16 11/16 1/8 50 1-3/8 39 29.9AAB00036 1/2 5/8 1/16 50 2-7/8 20 6.0AAB00037 1/2 11/16 3/32 50 2-1/8 28 14.0AAB00038 1/2 3/4 1/8 50 1-3/4 36 25.0AAB00046 5/8 7/8 1/8 50 2-3/8 30 16.0AAB00051 11/16 15/16 1/8 50 2-7/8 28 13.0AAB00053 3/4 1 1/8 50 3-1/4 26 11.0AAB00059 7/8 1-1/8 1/8 50 4-1/8 23 8.0AAB00062 1 1-1/4 1/8 50 5-1/8 20 6.0AAB00064 1 1-3/8 3/16 50 3-3/4 28 14.0AAB00065 1 1-1/2 1/4 50 3 36 25.0AAB00069 1-1/4 1-1/2 1/8 50 7-3/8 17 4.0AAB00070 1-1/4 1-5/8 3/16 50 5-1/2 24 9.0AAB00071 1-1/4 1-3/4 1/4 50 4-3/8 30 16.0AAB00073 1-1/2 1-7/8 3/16 50 7-1/4 20 6.0AAB00074 1-1/2 2 1/4 50 5-7/8 26 11.0AAB00076 1-3/4 2-1/4 1/4 50 7-1/2 23 8.0AAB00078 2 2-1/2 1/4 50 9-3/8 20 6.0AAB05080 2 3 1/2 20 5-1/2 36 25.0AAB05081 2-1/4 2-3/4 1/4 20 11-1/4 19 5.0


Durometer Hardness D2240-03 63Shore A, 15 Sec

Color — Clear

Tensile Strength D412-98 2,300 (15.8)psi (MPa)


Tear Resistance D1004-03 180 (32)lb-f/inch (kN/m)


Water Absorption, % D570-98 0.1324 hrs. @ 23°C

Compression Set D395-03Constant Deflection, % Method B 65@ 158°F (70°C) for 22 hrs.

Brittleness By D746-98 -49 (-45)Impact Temp., °F (°C)

Maximum Recom-mended Operating — 165 (74) Temp., °F (°C)

Dielectric Strength, D149-97 518 (20.4)v/mil (kV/mm)

Tensile Modulus, @ 200% D412-98 1,760 (12.1)Elongation, psi (MPa)



Features/Benefits• Smooth,non-porousborewill nottrapparticulatesorpromote bacteriagrowth• Compatiblewithfoods containingahighoilcontent• Resistanttoharsh alkalinecleanersandsanitizers• Excellentalternativeto rigidpipingsystems• MeetsFDA,3-AandNSFcriteria

Typical Applications• Asepticfilling• Condimentdispensing• Dairyprocessing• Vitaminandflavor concentratesystems• Soft-servedispensing

FORMULATION B-44-4X

The preferred clear, flexible tubing for food processing applications

Preferred Tubing of the Food IndustryProducersoffood,milkanddairyproductsinsistuponTygon®Food,MilkandDairyTubingfordependableperformanceincountlessfilling,draining,transferandprocessingapplications.Itssmooth,non-porousboreinhibitsparticleentrapment,promotingasanitaryfluidpathbyminimizingpotentialforbacterialgrowth.Ithasoutstandingresistancetoharshalkalinecleanersandisequallyunaffectedbycommonlyusedsanitizers.

Lightweight and FlexibleLightinweightandeasytohandle,Tygon®Food,MilkandDairyTubingcanbeputintoservicequickly.Itreadilybendstoaccommodateabruptcornersandobstructions,requiringaminimumofcouplingsandfittings.Itsflexibilitycansaveuptoone-thirdthefootageandmuchofthelaborrequiredtoinstallrigidstainlesssteelorplasticpiping.

Meets FDA, NSF and 3-A Criteria Non-toxic,taste-freeandodor-free,Tygon®Food,MilkandDairyTubingmeetsapplicableregulatorystandardsforcontactwithfoodproducts.Tygon®Food,MilkandDairyTubingisNSFlistedunderStandard51.Thisstandardcoversplasticmaterialsandcomponentsforuseinfoodandbeverageprocessinganddispensingequipment.ItalsomeetsFDA21 CFR,175.300 criteriaand3-APlasticsStandardCriteriaforuseinhandlingfoodsandbeverages.

Available in Large Bore Sizes Tygon®Food,MilkandDairyTubingisavailableinlargeboresizesupto6"insidediameter,makingitaflexiblealternativetorigidpipingsystems.Itofferscompleteclarityforpositivevisualinspectionandflowcontrol.

Reinforced Tubing Available for Elevated PressureAspecialconstructionofTygon®Food,MilkandDairyTubingisalsoavailabletomeetapplicationsinvolvingelevatedpressure.Intheseinstances,selectTygon®PressureTubing,FormulationB-44-4XI.B.

Tygon®PressureTubinghastheidenticalproductfeaturesfoundinTygon®Food,MilkandDairyTubing,withreinforcementaddedtowithstanduptofour timesthepressure.

TYGON®Food,MilkandDairyTubing

With its smooth non-porous bore, Tygon® Food, Milk and Dairy Tubing helps ensure a bacterial-free fluid path in a wide variety of food processing applications.



www.tygon.comIMPORTANT: Itistheuser’sresponsibilitytoensurethesuitabilityandsafetyofSaint-GobainPerformancePlasticstubingforallintendeduses.Laboratoryandclinicaltestsmustbeconductedinaccordancewithapplicableregulatoryrequirementsinordertodeterminethesafetyandeffectivenessforuseoftubinginanyparticularapplication.Foraperiodof6monthsfromthedateoffirstsale,Saint-GobainPerformancePlasticsCorporationwarrantsthisproducttobefreefromdefectsinmaterialsandworkmanship.Ouronlyobligationwillbetoreplaceanyportionprovingdefectiveoratouroptiontorefundthepurchasepricethereof.Userassumesallotherrisk,ifany,includingtheriskofinjury,lossordamage,directorconsequential,arisingoutoftheuse,misuseorinabilitytousethisproduct.THISWARRANTYISINLIEUOFTHEWARRANTIESOFMERCHANTABILITY,FITNESSFORPARTICULARPURPOSE,ANDALLOTHERWARRANTIES,EXPRESSEDORIMPLIED.Nodeviationisauthorized.Saint-GobainPerformancePlasticsCorporationassumesnoobligationsorliabilityforanyadvicefurnishedbyit,orforresultsobtainedwithrespecttothoseproducts.Allsuchadviceisgivenandacceptedatthebuyer’srisk.


©2007Saint-GobainPerformancePlasticsFLS3285-2.5M-0307-SGCS

The values listed for working and burst pressures are derived from tests conducted under controlledlaboratory conditions. Many factors will reduce the tubing’s ability to withstand pressures includingtemperature,chemicalattack,stress,pulsationandtheattachmenttofittings.Itisimperativethattheuserconducttestssimulatingtheconditionsoftheapplicationpriortospecifyingthetubingforuse.

Tygon® B-44-4X Tubing Typical Physical PropertiesTygon® B-44-4X Tubing Manufactured Sizes and Pressures Saint-gobain Wall Minimum Max. Working Vacuum Rating Part I.D. o.D. Thickness Length Bend Radius Pressure In. of Mercury number (inches) (inches) (inches) (feet) (inches) at 73°F (psi)* at 73°F AAA00001 1/32 3/32 1/32 50 1/8 100 29.9 AAA00002 1/16 1/8 1/32 50 1/4 60 29.9 AAA00003 1/16 3/16 1/16 50 1/8 100 29.9 AAA00004 3/32 5/32 1/32 50 3/8 43 29.9 AAA00006 1/8 3/16 1/32 50 1/2 34 25.0 AAA00007 1/8 1/4 1/16 50 3/8 60 29.9 AAA00009 5/32 7/32 1/32 50 3/4 28 16.0 AAA00010 5/32 9/32 1/16 50 1/2 50 29.9 AAA00011 3/16 1/4 1/32 50 1 25 11.0 AAA00012 3/16 5/16 1/16 50 5/8 43 29.9 AAA00013** 3/16 3/8 3/32 50 1/2 60 29.9 AAA00017 1/4 3/8 1/16 50 1 34 25.0 AAA00018 1/4 7/16 3/32 50 3/4 47 29.9 AAA00019 1/4 1/2 1/8 50 5/8 60 29.9 AAA00022 5/16 7/16 1/16 50 1-3/8 28 16.0 AAA00023 5/16 1/2 3/32 50 1 40 29.9 AAA00024 5/16 9/16 1/8 50 7/8 50 29.9 AAA00025** 5/16 5/8 5/32 50 3/4 60 29.9 AAA00027 3/8 1/2 1/16 50 1-3/4 25 11.0 AAA00028 3/8 9/16 3/32 50 1-3/8 34 25.0 AAA00029 3/8 5/8 1/8 50 1-1/8 44 29.9 AAA00032** 7/16 9/16 1/16 50 2-1/4 22 8.0 AAA00033** 7/16 5/8 3/32 50 1-3/4 30 19.0 AAA00036 1/2 5/8 1/16 50 2-7/8 19 6.0 AAA00037 1/2 11/16 3/32 50 2-1/8 27 14.0 AAA00038 1/2 3/4 1/8 50 1-3/4 34 25.0 AAA00039 1/2 13/16 5/32 50 1-1/2 40 29.9 AAA00041** 9/16 3/4 3/32 50 2-1/2 25 11.0 AAA00045 5/8 13/16 3/32 50 3 23 9.0 AAA00046 5/8 7/8 1/8 50 2-3/8 29 16.0 AAA00047 5/8 15/16 5/32 50 2 35 26.0 AAA00053 3/4 1 1/8 50 3-1/4 25 11.0 AAA00054 3/4 1-1/16 5/32 50 2-3/4 30 18.0 AAA00055 3/4 1-1/8 3/16 50 2-3/8 34 26.0 AAA00057 3/4 1-1/4 1/4 50 2 43 29.9 AAA00059 7/8 1-1/8 1/8 50 4-1/8 22 8.0 AAA00062 1 1-1/4 1/8 50 5-1/8 20 6.0 AAA00063 1 1-5/16 5/32 50 4-3/8 24 10.0 AAA00064 1 1-3/8 3/16 50 3-3/4 27 14.0 AAA00065 1 1-1/2 1/4 50 3 34 25.0 AAA00067 1-1/8 1-3/8 1/8 50 6-1/4 18 5.0 AAA00070 1-1/4 1-5/8 3/16 50 5-1/2 23 9.0 AAA00073** 1-1/2 1-7/8 3/16 50 7-1/4 19 6.0 AAA00074 1-1/2 2 1/4 50 5-7/8 25 11.0 AAA00078 2 2-1/2 1/4 50 9-3/8 19 6.0 AAA05078 2 2-1/2 1/4 20 9-3/8 19 6.0 AAA05079** 2 2-3/4 3/8 20 6-7/8 27 14.0 AAA05080** 2 3 1/2 20 5-1/2 34 25.0 AAA05082 2-1/2 3 1/4 20 13-3/8 16 4.0 AAA05083** 2-1/2 3-1/4 3/8 20 10 23 9.0 AAA05085 3 3-1/2 1/4 20 18 14 2.0 AAA05086** 3 3-3/4 3/8 20 13-1/4 19 6.0 AAA05088** 4 5 1/2 20 17 19 6.0 AAA06088 4 5 1/2 10 17 19 6.0 AAA05318** 6 6-1/2 1/4 20 55-3/8 8 0.5 AAA06318** 6 6-1/2 1/4 10 55-3/8 8 0.5* Working pressures are calculated at a 1:5 ratio relative to burst pressure using ASTM D1599.** Made to order, minimums will apply.


DurometerHardness D2240 65 ShoreA,15Sec

Color — Clear

TensileStrength D412 2,100 (14.5) psi(MPa)


TearResistance D1004 200 (35) lb-f/inch(kN/m)


WaterAbsorption,% D570 0.15 24hrs.@23°C

CompressionSet D395 ConstantDeflection,% MethodB 62 @158°F(70°C)for22hrs.

BrittlenessBy D746 -47 (-44) ImpactTemp.,°F(°C)

MaximumRecom- mendedOperating — 165 (74) Temp.,°F(°C)

DielectricStrength, D149 518 (20.4) v/mil(kV/mm)

TensileModulus,@200% D412 1,760 (12.1) Elongation,psi(MPa)

TensileSet,% D412 78


TYGON®FOOD,MILKANDDAIRYTUBINGISNOTINTENDEDFORUSEASANIMPLANTMATERIAL

www.tygon.com


Versatility Provides the Solution to Many ApplicationsTygon® B-44-4X I.B. Pressure Tubing can be used to transport many types of fluids in applications ranging from those regulated by FDA guidelines to industrial andlaboratory applications involving virtually all non-solvent based chemicals.

Flexibility to Deal with the “Twists and Turns”Lightweight and easy to handle, Tygon® B-44-4X I.B. Pressure Tubing goes into serv-ice quickly. It readily curves around corners and obstructions, requiring a minimumof couplings and fittings. Its flexibility can save up to one-third the footage andmuch of the labor required to install rigid stainless steel, glass tubing or piping.

Reduces the Risk of Bacterial ContaminationTygon® B-44-4X I.B. tubing’s smooth non-porous inner bore resists particle entrap-ment and resultant bacterial growth. Its excellent non-wetting properties facilitate complete drainage and increase the overall effectiveness of cleaning, making it the ideal choice in food, beverage, dairy, and other bacterial sensitive applications. Virtually taste and odor free Tygon® B-44-4X I.B. Pressure Tubing fully complies with FDA 175.300 criteria and the 3-A Sanitary Standards for food contact applicationsas well as being listed under the NSF Standard 51. Custom antimicrobial version available upon request.

Ideal for Use with ReSeal® Reusable Sanitary FittingsBy combining Tygon® B-44-4X I.B. tubing with ReSeal® Reusable Fittings, completeassemblies can be constructed, providing a contamination free environment thatmaintains the purity of fluids being transferred. ReSeal® assemblies are easy to install and can increase manufacturing efficiency by providing a fluid path thatis repeatedly sterilizable using many conventional clean-in-place methods.

Reinforced to provide increased pressure capability, Tygon® B-44-4X I.B. tubing is the most flexible reinforced tubing available.

TYGON®

Pressure Formulation B-44-4X I.B.

Unique Flexibility PermitsUse Where OtherReinforced Tubings Kinkand Collapse

Features / Benefits

• Handles Four Times the Pressure of Non-Reinforced Tubing

• Smooth, Non-Porous Bore ResistsParticle Entrapment

• Clear Wall Enables Visualization of Fluid Flow

• Connects Easily to ReSeal®Sanitary Fittings

• Meets FDA, 3-A and NSF Criteria

Typical Applications Include:

• Cosmetic Production


• Beverage Dispensing

• Pharmaceutical Filling

• Water Purification Systems

• Printing Equipment

• Coolant Lines

• Chemical Transfer

• Instrumentation and Air Supply


TYGON® Pressure Formulation B-44-4X I.B.

North AmericaSaint-Gobain Performance Plastics2664 Gilchrist RoadAkron, OH 443051-800-798-1554 / 330-798-9240Fax 330-798-6968

IMPORTANT: It is the user’s responsibility to ensure the suitability and safety of Saint-Gobain Performance Plastics tubing for all intended uses. Laboratory and clinical tests must beconducted in accordance with applicable regulatory requirements in order to determine the safety and effectiveness for use of tubing in any particular application.

For a period of 6 months from the date of first sale, Saint-Gobain Performance Plastics Corporation warrants this product to be free from defects in materials and workmanship.Our only obligation will be to replace any portion proving defective or at our option to refund the purchase price thereof. User assumes all other risk, if any, including the risk of injury, loss or damage, direct or consequential, arising out of the use, misuse or inability to use this product. THIS WARRANTY IS IN LIEU OF THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE, AND ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED. No deviation is authorized.

Saint-Gobain Performance Plastics Corporation assumes no obligations or liability for any advice furnished by it, or for results obtained with respect to those products. All such advice is given and accepted at the buyer’s risk.

FLS-3081-5M-0103-FPH www.tygon.com ©2003 Saint-Gobain Performance Plastics Corporation

The values listed for working and burst pressures are derived from tests conducted under controlled laboratory conditions. Many factors will reduce the tubing’s ability to withstand pressures including temperature, chemical attack, stress, pulsation and the attachment to fittings. It is imperative that the user conduct tests simulating the conditions of the application prior to specifying the tubing for use.

TYGON® B-44-4X I.B. TUBING IS NOT INTENDED FOR USE AS AN IMPLANT MATERIAL

Distributed by:

Tygon® B-44-4X I.B. Manufactured Sizes and Pressures

Norton Wall Max. Bend Vacuum RatingPart I.D. O.D. Thickness Length Radius Max. Working Pressure In. of Mercury

Number (inches) (inches) (inches) (feet) (inches) at 73°F (PSI)* at 160°F (PSI)* at 73°F (PSI)* at 160°F (PSI)*ADA00018 1/4 7/16 3/32 50 1-1/2 250 90 29.9 29.9ADA00029 3/8 5/8 1/8 50 1-1/8 170 90 29.9 25.0ADA00038 1/2 3/4 1/8 50 2-1/8 200 95 29.9 10.0ADA00046 5/8 7/8 1/8 50 2-3/8 165 105 25.0 10.0ADA00053 3/4 1 1/8 50 3-1/4 145 85 20.0 5.0ADA00064 1 1-3/8 3/16 50 3-3/4 100 60 20.0 5.0ADA00070 1-1/4 1-5/8 3/16 50 5-1/2 85 55 10.0 3.0ADA00074 1-1/2 2 1/4 50 5-7/8 75 45 10.0 2.0ADA05074 1-1/2 2 1/4 20 5-7/8 75 45 10.0 2.0ADA06074 1-1/2 2 1/4 10 5-7/8 75 45 10.0 2.0ADA05079 2 2-3/4 3/8 20 6-7/8 60 40 25.0 10.0ADA06079 2 2-3/4 3/8 10 6-7/8 60 40 25.0 10.0ADA05086 3 3-3/4 3/8 20 13-1/4 40 25 10.0 1.0ADA06086 3 3-3/4 3/8 10 13-1/4 40 25 10.0 1.0


Tygon® B-44-4X I.B. Typical Physical Properties

Property ASTM Method Value or RatingDurometer Hardness Shore A, 15 Sec D2240-02 65Color - ClearTensile Strength psi (MPa) D412-98 2,100 (14.5)Ultimate Elongation, % D412-98 450Tear Resistance lb-f/inch (kN/m) D1004-94 200 (35)Specific Gravity D792-00 1.21Water Absorption, % 24 hrs. @ 23°C D570-98 0.15

Compression Set Constant Deflection, D395-01% @158°F (70°C) for 22 hrs. Method B 62Brittleness By Impact Temp.,°F (°C) D746-98 -47 (-44)

Maximum Recommended Operating - 165 (74)Temp., °F (°C)Dielectric Strength, v/mil (kV/mm) D149-97 517 (20.3)

Tensile Modulus, D412-98 1,150 (7.9)@ 100% Elongation, psi (MPa)Tensile Set, % D412-98 78

Unless otherwise noted, all tests were conducted at room temperature (73°F). Values shown were determined on 0.075" thick extruded strip or 0.075" thick molded ASTM plaques or molded ASTMdurometer buttons.


Features/Benefits• Resistsembrittlement

• Compatiblewith mosthydrocarbons

• Resistanttoswelling

• Highlyflexible,easytoinstall

• Specificallydevelopedfor fuelsandlubricants

• OzoneandUVlightresistant

Typical Applications• Smallenginefuellines

• Generalautomotive

• Recreationalvehicles

• Lawnandgardenequipment

• Coolanttransfer

• Heatingfuels

• Cuttingcompounds

• Polishingequipment

• Lubricationlines

FORMULATION F-4040-A

high performance fuel and lubricant tubing designed for today’s small engines

TYGON®FuelandLubricantTubing

Designed for safe and efficient handling of most petroleum-based products, Tygon® Fuel and Lubricant Tubing resists embrittlement, cracking and swelling.

Designed to Resist HydrocarbonsSpecificallydesignedtohandlemostfuelsandindustriallubricants,Tygon®FuelandLubricantTubingresiststheswellingandhardeningcausedbyhydrocarbon-basedfluids.Thissignificantlyreducestheriskoffailureduetocrackingandleakage.Itsminimumextractabilitysafeguardstheliquidorvaporbeingtransferredagainstadulteration.

Becauseit’sextremelyflexible,Tygon®FuelandLubricantTubingsimplifiesinstallation,evenintightplaces.Itistranslucentyellowforpositiveidentificationandtoalloweasyflowmonitoring.Itisroutinelyusedtohandlegasoline,kerosene,heatingoils,cuttingcompoundsandglycol-basedcoolants.

Low Rate of PermeationIn-housetestingofTygon®FuelandLubricantTubinghasshownittohavealowerrateofpermeationthancompetitivetubings.Reducedlevelsofpermeationmaylimitalterationandlossoffuelscriticaltotoday’shighperformanceengines.

Routinely Specified in Fuel and Lubricant ApplicationsAconsistentperformerlotafterlot,Tygon®FuelandLubricantTubingisthemostrequestedfuelandlubricanttubingforavarietyofapplications—fromsmallenginefuellinestocoolanttransfer.

OtherTygon®formulationsavailabletomeetnewpermeationstandards.



www.tygon.com

Tygon® F-4040-A Manufactured Sizes and Pressures



©2007Saint-GobainPerformancePlasticsFLS3288-2.5M-0307-SGCS

The values listed for working pressures are derived from tests conducted under controlled laboratoryconditions.Many factors will reduce the tubing’s ability to withstand pressures including temperature,chemicalattack,stress,pulsationandtheattachmenttofittings.Itisimperativethattheuserconducttestssimulatingtheconditionsoftheapplicationpriortospecifyingthetubingforuse.


Tygon® F-4040-A Typical Physical Properties Comparative Fuel Permeation Rate of Tubing



DurometerHardnessShoreA,15 Sec D2240 57

Color — Translucent Yellow

TensileStrength,psi(MPa) D412 1,820 (12.5)


TearResistance,lb-f/inch(kN/m) D1004 167 (29)


WaterAbsorption,%24hrs.@23°C D570 0.49

CompressionSetConstantDeflection, D395 %@158°F(70°C)for22hrs. MethodB 65

BrittlenessByImpactTemp.,°F(°C) D746 -35 (-37)

MaximumRecommendedOperating Temp.,°F(°C) — 165 (74)

DielectricStrength,v/mil(kV/mm) D149 403 (15.8)

TensileModulus,@100% D412 910 (6.3) Elongation,psi(MPa)


Saint-gobain Wall Minimum Max. Working Vacuum Rating Part I.D. o.D. Thickness Length Bend Radius Pressure In. of Mercury number (inches) (inches) (inches) (feet) (inches) at 73°F (psi)* at 73°F AAG00700 .080 .140 .030 50 1/4 40 29.9

AAG00165 3/32 3/16 3/64 50 1/4 50 29.9

AAG00007 1/8 1/4 1/16 50 3/8 50 29.9

AAG00012 3/16 5/16 1/16 50 5/8 35 29.9

AAG00017 1/4 3/8 1/16 50 1 30 22.0

AAG00022 5/16 7/16 1/16 50 1-3/8 25 14.0

AAG00027 3/8 1/2 1/16 50 1-7/8 20 10.0

AAG00029 3/8 5/8 1/8 50 1-1/8 35 29.9

AAG00032 7/16 9/16 1/16 50 2-3/8 15 7.0

AAG00036 1/2 5/8 1/16 50 2-7/8 15 5.0

AAG00038 1/2 3/4 1/8 50 1-3/4 30 22.0

AAG00046 5/8 7/8 1/8 50 2-1/2 25 14.0

AAG00053 3/4 1 1/8 50 3-1/4 20 10.0

Thetablebelowsummarizestheresultsofanin-housestudyconductedonpermeationofunleaded,alcohol-free87octanegasolinein1/4"IDx3/8"ODtubing.TestingwasconductedinaccordancewithSAEJ1527.

Tygon® F-4040-A Tubing

Competitive Fuel Tubing

20 40 60 80 100 120 FuelPermeationRate (gm/m2/24hours)

Theperformanceoftubingisaffectedbytheconditionsofuseandequipmentutilized,alongwithsizeandwallthicknessofthetubingtested.Thedataaboveispresentedforinformationonlyandshouldnotbeutilizedforspecificationpurposes.

70

125

www.tygon.com


Features/Benefits• Longest Flex Life of Any Clear

TYGON® Tubing

• Extremely Low ParticulateSpallation

• Broad Chemical Resistance

• Meets USP Class VI and FDA Criteria

Typical Pump Applications• Production Filtration and

Fermentation

• Food and Cosmetic Processing

• Flavor and Vitamin ConcentrateDispensing

• Surfactant Delivery

• Printing Ink Transfer

• Plating Chemicals Delivery

• Drum and Tank Drainage

• Highly Viscous Fluid Transfer

• Shear-sensitive Fluid Transfer

TYGON®LFL Long Flex Life Pump Tubing

biopharmaceutical products

Peristaltic Pump Systems Limit Risk of Fluid ContaminationPeristaltic pumping offers the advantage of efficiently transporting fluids without riskingcontact with any portion of the pump itself. To accomplish this, flexible tubing is insertedbetween the pump rollers and housing. As the rollers rotate around a stationary rotor,the tubing is “squeezed,” or occluded, pushing the fluid along through the inside tubingsurface. As the tubing behind each roller recovers its shape, a vacuum is created, drainingadditional fluid from behind the occluded tubing. During this process the fluid iscontained entirely within the flexible tubing, eliminating exposure (and risk of fluidcontamination) to any components of the pump.

Proper Tubing Selection Leads to Optimal PerformanceCrystal-clear TYGON® Long Flex Life Pump Tubing is formulated specifically for use inperistaltic pump applications. With its superior flex life characteristics, manufacturingprocesses can be simplified by reducing production downtime due to pump tubingfailure. (See Comparative Peristaltic Pump Tubing Life chart on back of page.) In-housetests indicate the excellent wear properties of TYGON Long Flex Life Pump Tubing alsolead to a reduction of particulate spallation. Limiting particle spallation can reduce theneed for frequent downstream filter replacement. This unique feature can also reducethe risk of sensitive-fluid contamination critical to many applications found in thepharmaceutical, cosmetic, food and high purity chemical industries.

Numerous Benefits to Specifying TYGON Long Flex Life TubingNon-aging characteristics and broad chemical resistance provide users with versatility fora wide variety of applications. Safe and non-toxic TYGON Long Flex Life Pump Tubing canbe produced in up to a 6" inside diameter, making it the ideal choice in bulk transferapplications. Additionally, TYGON Long Flex Life Tubing will withstand virtually allcommercial cleaning agents and bactericides without danger of corrosion (as withmetals) or oxidation (as with rubber). TYGON Long Flex Life Tubing can also be sterilizedthrough conventional autoclave methods (steam 30 minutes at 15 psi), making it ideal foruse in high purity process applications.

Long flex life pumptubing formulatedspecifically for use in peristaltic pumpapplications

Crystal-clear TYGON® Long Flex Life Pump Tubing optimizes peristaltic pump performance in numerousapplications including bulk transfer.


Saint-Gobain Performance Plastics2664 Gilchrist RoadAkron, OH 44305

Tel: (330) 798-9240

Tel: (800) 798-1554

Fax: (330) 798-6968

TYGON®LFL Typical Physical Properties

TYGON®LFL

PVC Tubing


Come through clean.SM


Durometer Hardness D2240-91 56

Shore A, 15 SecColor — ClearTensile Strength D412-92 1,550 (10.7)

psi (MPa)Ultimate Elongation, % D412-92 380

Tear Resistance D1004-93 122 (21)

lb-f/inch (kN/m)Specific Gravity D792-91 1.16

Water Absorption, % D570-81 0.18

24 hrs. @ 23°CCompression Set D395-89

Constant Deflection, % Method B 64

@ 158°F (70°C) for 22 hrs.Brittleness by Impact D746-79 -65 (-54)

Temp., °F (°C)Maximum Recommended — 165 (74)

Operating Temp.,°F (°C)Low Temp. Flexibility, D380-87 -94 (-70)

°F (°C)Dielectric Strength D149-93 414

v/mil (kV/mm) (16.3)

Tensile Modulus, D412-92

@ 100% psi (MPa) 600 (4.1)

@ 200% psi (MPa) 900 (6.2)


Comparative Peristaltic Pump Tubing LifeThe table below depicts hours until failure of 1/4" ID x 3/8" OD tubing. In eachcase, a 3-roller pump head was utilized operating at 600 rpm under roomtemperature (73° F). Tubing failure is measured in hours of use prior to rupture.

The performance of tubing in peristaltic pumping applications is affected bythe conditions of use and equipment utilized, along with size and wallthickness of the tubing tested. The data above is presented for informationonly and should not be utilized for specification purposes.


TYGON®LFL Tubing Inventoried Sizes

Wall Minimum Max. Suggested Vacuum RatingPart I.D. O.D. Thickness Length Bend Radius Working Pressure at In. of Mercury

Number (inches) (inches) (inches) (feet) (inches) 73°F (psi)* 60°F (psi)* 73°F 160°FAVW42003 1/16 3/16 1/16 25 1/4 50 14 29.9 29.9

AVW42007 1/8 1/4 1/16 25 1/2 33 10 29.9 29.9

AVW42012 3/16 5/16 1/16 25 3/4 25 7 29.9 20.0

AVW42017 1/4 3/8 1/16 25 1 20 6 15.0 5.0

AVW42019 1/4 1/2 1/8 25 3/4 35 9 29.9 29.9

AVW42022 5/16 7/16 1/16 25 1-1/4 15 5 10.0 5.0

AVW42029 3/8 5/8 1/8 25 1 25 7 29.9 10.0

AVW42038 1/2 3/4 1/8 25 1-1/2 20 6 20.0 10.0

AVW06057 3/4 1-1/4 1/4 10 1-3/4 24 9 29.9 15.0

AVW06064 1 1-3/8 3/16 10 3-1/4 15 5 5.0 ≤2.0


TYGON TUBING IS NOT INTENDEDFOR USE AS AN IMPLANT MATERIAL

10 psi back pressure 0 psi back pressure

The values listed for working and burst pressures are derived from testsconducted under controlled laboratory conditions. Many factors will reducethe tubing’s ability to withstand pressures, including temperature, chemicalattack, stress, pulsation and the attachment to fittings. It is imperative thatthe user conduct tests simulating the conditions of the application prior tospecifying the tubing for use.

650-700 Hours

800 Hours

20 Hours

25 Hours

1 10 100 1000



Unless otherwise noted, all tests were conducted at room temperature (73°F). Values shownwere determined on 0.075" thick extruded strip or 0.075" thick molded ASTM plaques ormolded ASTM durometer buttons.


Printer Friendly

Contact Us

All Products

Products Home > Products >

Tygon® Flexible Tubing

Tygon® LP1000 Marine Fuel Line Tubing

Tygon® Marine Fuel Line Tubing

Formulation LP1000

Tygon® LP1000 Low Permeation Marine Fuel Line Tubing is one of several new CARB and EPA certified products offered by Saint-Gobain Performance Plastics with a thermoplastic liner. This thermoplastic liner creates better fitting retention and an easier/faster

assembly process. Tygon® LP1000 is opaque gray in color and is ozone and UV light resistant.

CARB approved, Executive Order Number: Q-08-032, sizes 3/32” ID and above EPA approved, SGN-EVAPNR-09-02, sizes 3/32” ID and above.

• Conforms to proposed EPA 40 CFR 1060 regulations• Conforms to EPA 40 CFR 1051 recreational engines and vehicles• Conforms to CA SORE Chapter 15, Article 1• UL 94 HB (liner and cover)• Thermoplastic liner creates better fitting retention• Excellent bend radius resulting in kink resistance• Resistant to premature aging• Ozone and UV light resistant• Custom colored jacket capabilities• Does not use carbon black as UV protective barrier• Available in sizes 3/32” I.D and above• Thermoplastic liner creates better fitting retention• Thermoplastic liner creates easier/faster assembly process

Tygon®

© Saint-Gobain Performance Plastics, Process Systems 2012 Other Saint-Gobain Web Sites | Contact Us | Legal | Site Map

Contact Us | www.saint-gobain.comChange: English

Search

Advanced Search

Features & Benefits

Product Features

Related Links

Home» About Us» Tygon S3™» Product Category» Markets» Tools & Reference» News & Events» Contact Us»

Page 1 of 1Tygon® LP1000 Marine Fuel Line Tubing | Saint-Gobain Performance Plastics, Process ...

12/13/2012http://www.processsystems.saint-gobain.com/product_detail.aspx?id=250544


Tygon® LP 1100 Low Permeation Fuel Tubing

(800) 798-1554www.tygon.com Tygon® is a registered trademark of Saint-Gobain Corporation.

©2011 Saint-Gobain Performance Plastics Corporation FLS-3325-PDF-0711-SGCS

Performance driven. Environmentally responsible.Designed to Meet New Emission Standards

Features•EPAandCARBcertifiedtomeetpermeation

emissionstandardsof15g/M2/day•Fluoropolymerlinercompatiblewith

higherethanolblendgasolineupto100%•Robustmulti-layerdesignandconstruction•Resistanttoswelling,hardeningandcracking

causedbyhydrocarbon-basedfluids•Highlyflexible,easytoinstallandoffers

excellentfittingretention•OzoneandUVlightresistant•Widetemperaturerangefrom

-20˚Fto165˚F(-28.9˚Cto73.9°C)

Benefits•Conformstonewgovernmentregulatory

standardsforcleanair•Reduceshydrocarbonvaporsescapingor

permeatingintotheatmosphere•Protectspublichealthandwelfare•Reducesphotochemicalsmog•Promotescleanerairandreducesairpollution•Greenerandenvironmentallyfriendlier•Highabrasion,cutandtearresistancefor

longerservicelife

Offersabetteralternative toTygon®F-4040-A

Speciallydesignedtomeetlow permstandards -EPAcertificationSGN-ENAPNR-0A-03 -CARBexecutiveorderQ-09-028

Availablein5commonsizesasstock: - .080"(1.984mm)IDX .140"(3.572mm)OD -3/32"(2.381mm) IDX3/16"(4.762mm)OD - 1/8"(3.175mm) IDX 1/4"(6.35mm) OD -3/16"(4.762mm)IDX5/16"(7.937mm)OD - 1/4"(6.35mm) IDX 3/8"(9.525mm)OD

Regulatorysizelimitations -EPA–.080"(1.984mm)IDorlarger -CARB–0.187"(4.762mm)ID ±0.003"(0.076mm)orlarger

Translucentyellowforpositive identificationandeasyflowmonitoring

Customsizesandcolorsavailable

Patentpending

Compatible With 100% Ethanol


Applications•Smallenginefuellines•Lawnandgardenpowerequipment•Lubricatingoilandgreasetransferlines




Applications•Hand-heldlawnandgardenpowerequipment•Smallutility,farmandconstructionequipment•Fluidpowerpumpsandmotors•Smallenginefuellines

Speciallydesignedtomeetlow permstandards -EPAcertificationSGN-ENAPNR-0A-04 -CARBexecutive0rderQ-08-034

Allowableemissionstandardis 15g/M2/day -LP1500islessthan<6g/M2/day

Availablein4commonsizesasstock -3/32"(2.381mm)IDX3/16"(4.762mm)OD - 1/8"(3.175mm)IDX 1/4"(6.35mm) OD - 1/4"(6.35mm) IDX 3/8"(9.525mm)OD - 1/2"(12.7mm) IDX 3/4"(19.05mm) OD

Regulatorysizelimitations -EPA–3/32"(2.381mm)IDorlarger -CARB–0.094"(2.381mm)ID ±0.003"(0.076mm)orlarger


Patentpending

Performance driven. Environmentally responsible.Designed to Meet New Emission Standards

Features•EPAandCARBcertifiedtomeetpermeation

emissionstandardsof15g/M2/day•Robustmulti-layerdesignwithbarriersto

minimizepermeation•Chemicalandfuelresistantinnerlayer•UVresistantouterjacket•Widetemperaturerangefrom

-40˚Fto185˚F(-40˚Cto85°C)•Superiorclarityandflexibility

Benefits•Conformstonewgovernmentregulatory

standardsforcleanair•Highlyflexibleandkinkresistant•Cleartubingprovideseasyobservation

offuelflow•Highertemperatureratingforheatresistance•Sub-zerocoldtemperatureimpactstrength•UVresistantouterjackettoprevent

prematureaging•Highabrasion,cutandtearresistancefor

longerservicelife•Tighttolerancesforbetterfittingretention

andbetterseal•CompatiblewithE-10ethanolblendfuel







Performance driven. Environmentally responsible.Designed to Meet New Marine Market Emission StandardsFeatures•Specificallydesignedformarine

outboardfueldeliveryapplications•EPAandCARBcertifiedtomeetpermeation

emissionstandardsof15g/M2/day•Thermoplasticmulti-layertechnologydesigned

toprovidethebestbarrierconstruction•Highlyfuelresistantandethanol(E-100)

compatiblefluoropolymerinnerlayer•Robustdesignandconstructionforsafe

transferoffuelfromthetanktotheenginewithaprimerbulb

•ConformstoSAEJ1527B1standards•MeetsEPAB1-15andCARBOutdoorMarineTank

(OMT)above-deckratingsforthemarineindustry

•MeetsAmericanBoatandYachtCouncil(ABYC)H-24standards

•Customsizesandcolorsavailable•Widetemperaturerangefrom

-20˚Fto165˚F(-28.9˚Cto73.9°C)

Benefits•Conformstonewgovernmentregulations

forcleanair•Superiorflexibilityandkinkresistance•Excellentresistancetohydrocarbon-basedfuels

(leadedandunleadedfuels)•Compatiblewith100%ethanol•Excellentfittingretentionwhileproviding

easierandfasterassembly•OzoneandUVlightresistanttoprevent

prematureaging•Highabrasion,cutandtearresistancefor

longerservicelife

Applications•Marineboatswithabove-deckoutboardengines•Personalwatercraft–JetSkis,WaveRunners,etc.•Portablemarinefueldeliverysystems

Speciallydesignedtomeetlowpermstandards: -CARBexecutiveorderOMTG-10-030

(outdoormarinetank) -EPAcertificationSGN-EVAPNR-0A-01

Allowableemissionstandardis15g/M2/day: -LP1600islessthan<6g/M2/day


Custombrandingavailable

Patentpending





Features/Benefits

• Ultra-soft and flexible

• Performs well at lowtemperatures (to -100˚F)

• Excellent for use in low-torquepump applications

• Resistant to a broad range of corrosive chemicals

• Meets FDA CFR part 175.3000

Typical Applications

• General laboratory

• Analytical instruments

• Peristaltic pumps

• Vent and drain lines

An extremelysoft andflexible tubingthat offersminimalresistance tocompression

TYGON® R-1000 Ultra-Soft Tubing

A Flexible Alternative to Complex Laboratory Set-upsExtremely flexible, Tygon® Ultra-Soft Tubing is the solution to applicationsrequiring maximum drapeability and kink resistance. Even under laboratoryset-ups with abrupt radius curves and multiple directional changes, Tygon®Ultra-Soft Tubing resists twisting and collapse — common problems whenusing other tubing products. Tygon® Ultra-Soft Tubing stays flexible attemperatures as low as -100˚F (-73˚C). Its smooth bore facilitates easy cleaningand helps prevent possible buildup.

The Preferred Tubing in Low-Torque Peristaltic PumpsThe extremely low durometer of Tygon® Ultra-Soft Tubing provides minimalresistance to compression. This feature is ideal when using low-torque orbattery-driven peristaltic pumps and provides an excellent alternative tosilicone tubing where corrosive chemicals are used. Tygon® Ultra-Soft Tubingwill typically outlast silicone tubing in peristaltic pump applications by amargin of 2 to 1.

Tygon® Ultra-Soft Tubing provides unmatched flexibility and drapeability –characteristics beneficial to numerous laboratory set-ups.


Saint-Gobain I.D. O.D. Wall Length Minimum Maximum Vacuum Part Number (inches) (inches) Thickness (feet) Bend Working Rating, In.

(inches) Radius Pressure of Mercury(inches) at 73˚F (psi)* at 73˚F

AAU00003 1/16 3/16 1/16 50 1/8 55 29.9AAU00007 1/8 1/4 1/16 50 3/8 30 29.9AAU00012 3/16 5/16 1/16 50 5/8 20 25.0AAU00017 1/4 3/8 1/16 50 1 15 13.0AAU00019 1/4 1/2 1/8 50 5/8 30 29.9AAU00022 5/16 7/16 1/16 50 1-3/8 15 9.0AAU00027 3/8 1/2 1/16 50 1-3/4 10 6.0AAU00029 3/8 5/8 1/8 50 1-1/8 20 25.0AAU00036 1/2 5/8 1/16 50 2-7/8 10 3.0AAU00038 1/2 3/4 1/8 50 1-3/4 15 13.0


IMPORTANT: It is the user’s responsibility to ensure the suitability and safety of Saint-Gobain Performance Plastics tubing for all intended uses. Laboratory and clinical tests must beconducted in accordance with applicable regulatory requirements in order to determine the safety and effectiveness for use of tubing in any particular application.For a period of 6 months from the date of first sale, Saint-Gobain Performance Plastics Corporation warrants this product to be free from defects in materials and workmanship. Our onlyobligation will be to replace any portion proving defective, or at our option, to refund the purchase price thereof. User assumes all other risk, if any, including the risk of injury, loss or damage,direct or consequential, arising out of the use, misuse, or inability to use, this product. THIS WARRANTY IS IN LIEU OF THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE,AND ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED. No deviation is authorized.Saint-Gobain Performance Plastics Corporation assumes no obligations or liability for any advice furnished by it, or for results obtained with respect to those products. All such advice isgiven and accepted at the buyer's risk.

www.labpure.comwww.tygon.com

©2003 Saint-Gobain Performance Plastics CorporationFLS3122-2M-1203-SGCS

TYGON® R-1000 Tubing is not intended for use as an implant material.




Color — Clear

Tensile Strength, psi (MPa) D412-98 1,200 (8.3)




Water Absorption, % 24 hours at 23°C D570-98 0.30

Compression Set Constant Deflection, D395-01 57% @ 158°F (70°C) for 22 hours Method B

Brittleness By Impact Temp., °F (°C) D746-98 -103 (-75)

Maximum Recommended — 125 (52)Operating Temperature °F (°C)


Tensile Modulus, @ 100% Elongation, psi (MPa) D412-98 330 (2.2)


TYGON® R-1000 Typical Physical Properties

Unless otherwise noted, all tests were conducted at room temperature (73˚F). Values shown were determinedon 0.075" thick extruded strip or 0.075" thick molded ASTM plaques or molded ASTM durometer buttons.


The values listed for working and burst pressures are derived from tests conducted under controlled laboratory conditions. Many factorswill reduce the tubing’s ability to withstand pressures including temperature, chemical attack, stress, pulsation and the attachment tofittings. It is imperative that the user conduct tests simulating the conditions of the application prior to specifying the tubing for use.


Features/Benefits• Black in color, protects

light-sensitive fluids• Wide range of

chemical resistance• Ozone resistant• Excellent burn resistance• Low compression set;

resists permanent deformation• Available in clear formulation

for fluid flow monitoring

Typical Applications• Acid and caustic transfer• Corrosive diffusible gases • Fertilizer and pesticide dispensing• Electrical insulation lines• Ink and adhesive dispensing• General maintenance

FORMULATION R-3400

Remains flexiblein ultravioletenvironments

Versatility in Chemical ResistanceIdeal for virtually any permanent or temporary chemical transfer application,Tygon® UV Resistant Tubing combines suppleness and flexibility withresistance to a wide range of chemicals. It shows exceptional resistance tostrong acids and many alkalies.

The flexibility of Tygon® UV Resistant Tubing also makes it quick and easy toput into service, providing considerable savings on installation time and costwhen compared to rigid piping systems.

Outstanding WeatherabilityBlack in color, it is resistant to ultraviolet light, ozone and weathering, makingit ideal for many outdoor applications. Standard inventoried sizes of Tygon®UV Resistant Tubing have sufficient wall thickness to block transmission of allUV light.

Excellent Burn ResistanceTygon® UV Resistant Tubing will meet UL 94V-0 and UL 94HB flammabilityratings. Specifying Tygon® UV Resistant Tubing for use in equipment thatrequires specific burn characteristics can help to simplify the approval process.

TYGON® UV Resistant Tubing

Tygon® UV Resistant Tubing protects light-sensitive fluids while resisting degradation from ozoneand ultraviolet light.




TYGON® R-3400 Inventoried Sizes

TYGON® is a Saint-Gobain Performance Plastics registered trademark.


TYGON® R-3400 TUBING IS NOTINTENDED FOR USE AS AN IMPLANT

MATERIAL


Saint-Gobain Wall Minimum Max. Working Pressure Vacuum Rating,Part I.D. O.D. Thickness Length Bend at 73°F (psi) In. of Mercury

Number (inches) (inches) (inches) (feet) Radius (inches) at 73°F

AAE00002 1/16 1/8 1/32 50 1/4 60 29.9

AAE00004 3/32 5/32 1/32 50 3/8 45 29.9

AAE00005 3/32 7/32 1/16 50 1/4 80 29.9

AAE00007 1/8 1/4 1/16 50 3/8 60 29.9

AAE00010 5/32 9/32 1/16 50 1/2 50 29.9

AAE00011 3/16 1/4 1/32 50 1 25 11.0

AAE00012 3/16 5/16 1/16 50 5/8 45 29.9

AAE00013 3/16 3/8 3/32 50 1/2 60 29.9

AAE00017 1/4 3/8 1/16 50 1 35 25.0

AAE00018 1/4 7/16 3/32 50 3/4 50 29.9

AAE00022 5/16 7/16 1/16 50 1-3/8 30 16.0

AAE00027 3/8 1/2 1/16 50 1-3/4 25 11.0

AAE00029 3/8 5/8 1/8 50 1-1/8 45 29.9

AAE00032 7/16 9/16 1/16 50 2-1/4 20 8.0

AAE00038 1/2 3/4 1/8 50 1-3/4 35 25.0

AAE00046 5/8 7/8 1/8 50 2-3/8 30 16.0

AAE00053 3/4 1 1/8 50 3-1/4 25 11.0

Unless otherwise noted, all tests were conducted at room temperature (73˚F). Values shownwere determined on 0.075" thick extruded strip or 0.075" thick molded ASTM plaques ormolded ASTM durometer buttons.

TYGON® R-3400 Typical Physical Properties Property ASTM Method Value or Rating


Color - Black





Water Absorption, % 24 hrs. @ 23˚C D570-98 0.19

Compression Set Constant Deflection, D395-02 64% @ 158˚F (70˚C) for 22 hrs. Method B


Maximum Recommended Operating Temp., ˚F (˚C) - 165 (74)


Tensile Modulus, @ 100% Elongation, D412-98 1,000 (6.9)psi (MPa)


The values listed for working and burst pressures are derived from tests conducted under controlled laboratory conditions. Many factorswill reduce the tubing’s ability to withstand pressures including temperature, chemical attack, stress, pulsation and the attachment tofittings. It is imperative that the user conduct tests simulating the conditions of the application prior to specifying the tubing for use.

www.tygon.com


Typical Applications

• General laboratory

• Analytical instruments

• Peristaltic and vacuum pumps

• Ideal for condensers,incubators, desiccators, gas lines and drain lines

Consistentperformancefor reliableanalysis

TYGON® R-3603 Laboratory and Vacuum Tubing

Provides Versatility for Today’s LaboratoriesCrystal clear and flexible, Tygon® Laboratory Tubing handles virtually all inorganic chemicals foundin the lab. It is non-oxidizing and non-contaminating.

Long-lasting and crack-resistant, Tygon® Laboratory Tubing is less permeable than rubber tubing.The glassy-smooth inner bore helps prevent buildup so that cleaning is facilitated. Coils aremarked at 3-foot intervals for easy measuring.

Tygon® Laboratory Tubing may be safely sterilized by coiling loosely in surgical muslin andautoclaving at 15 psi of steam for 30 minutes. Following initial sterilization, a shrinkage of 2%-4%may be noted. However, no further shrinkage should occur with subsequent sterilizations.

Due to its excellent chemical resistance, Tygon® Laboratory Tubing may also be sterilizedchemically or by gas (ethylene oxide). Coil tubing and wrap loosely in muslin or linen and followthe directions of your sterilization equipment manufacturer. Where aeration equipment such asvacuum and drying is required, follow the recommended times for degassing to ensure against gasretention and to reduce any residual concentration below known safety limits.

Secure Fitting AttachmentTygon® Laboratory Tubing has a Shore A Durometer of 55, which enables it to be slipped overfittings quickly and easily, and to grip securely. Its ability to bend readily to sharp radius curvesspeeds and simplifies laboratory set-ups.

Tygon® Laboratory Tubing is specially formulated for resistance to flex-fatigue and abrasion. Inmany peristaltic pump applications, it will outlast its nearest competitor by at least 2 to 1. As atubing for instrumentation connection, vent, drain, and other general laboratory applications,Tygon® Laboratory Tubing offers superior life, which minimizes the labor and expense ofreplacement.

Available in Vacuum Tubing SizesTygon® Vacuum Tubing has extra heavy walls that will withstand a full vacuum at roomtemperature (29.9" [759mm] of mercury at 73˚F [23˚C] and up to 27" [686 mm] of mercury at 140˚F[60˚C]). Like standard Tygon® Laboratory Tubing, Tygon® Vacuum Tubing resists most inorganicchemicals and can be used in corrosive atmospheres. Clarity allows monitoring for possiblebackups, which could result in equipment damage. Tygon® Vacuum Tubing will not swell closed ifvacuum pump oil should happen to back into it. Tygon® Vacuum Tubing has a low vapor pressure –less than 3 x 10-2 mm Hg at 140˚F.

The most consistently reliable tubing for the transfer of liquids and gases, Tygon® LaboratoryTubing handles virtually all inorganic chemicals found in today’s laboratories.

Features/Benefits

• Outstanding chemical resistance

• Lot-to-lot consistency forreproducible results

• Increases productivity inperistaltic pumps – outlasts other clear tubing 2 to 1

• Standard sizes available to hold full vacuum atroom temperature

• Smooth, polished inner wall

• Non-aging and non-oxidizing

• Meets FDA CFR part175.300 criteria


TYGON® R-3603 Tubing Inventoried Sizes TYGON® R-3603 Tubing Inventoried Sizes

www.labpure.comwww.tygon.com


TYGON® Tubing is not intended for use as an implant material.


IMPORTANT: It is the user’s responsibility to ensure the suitability and safety of Saint-Gobain Performance Plastics tubing for all intended uses. Laboratory and clinical tests must beconducted in accordance with applicable regulatory requirements in order to determine the safety and effectiveness for use of tubing in any particular application.For a period of 6 months from the date of first sale, Saint-Gobain Performance Plastics Corporation warrants this product to be free from defects in materials and workmanship. Our onlyobligation will be to replace any portion proving defective, or at our option, to refund the purchase price thereof. User assumes all other risk, if any, including the risk of injury, loss or damage,direct or consequential, arising out of the use, misuse, or inability to use, this product. THIS WARRANTY IS IN LIEU OF THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE,AND ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED. No deviation is authorized.Saint-Gobain Performance Plastics Corporation assumes no obligations or liability for any advice furnished by it, or for results obtained with respect to those products. All such advice isgiven and accepted at the buyer's risk.



AAC00001 1/32 3/32 1/32 50 1/8 80 29.9AAC00002 1/16 1/8 1/32 50 1/4 45 29.9AAC02002 1/16 3/16 1/16 100 1/8 45 29.9AAC04002 1/16 3/16 1/16 500 1/8 45 29.9AAC00003 1/16 3/16 1/16 50 1/8 75 29.9AAC00004 3/32 5/32 1/32 50 3/8 30 29.9AAC02004 3/32 5/32 1/32 100 3/8 30 29.9AAC00005 3/32 7/32 1/16 50 1/4 55 29.9AAC00006 1/8 3/16 1/32 50 1/2 25 20AAC04006 1/8 3/16 1/32 500 1/2 25 20AAC00007 1/8 1/4 1/16 50 3/8 45 29.9AAC02007 1/8 1/4 1/16 100 3/8 45 29.9AAC04007 1/8 1/4 1/16 500 3/8 45 29.9AAC00009 5/32 7/32 1/32 50 3/8 20 12AAC00010 5/32 9/32 1/16 50 1/2 35 29.9AAC02010 5/32 9/32 1/16 100 1/2 35 29.9AAC00011 3/16 1/4 1/32 50 1 20 9AAC00012 3/16 5/16 1/16 50 5/8 30 29.9AAC02012 3/16 5/16 1/16 100 5/8 30 29.9AAC04012 3/16 5/16 1/16 500 5/8 30 29.9AAC00013 3/16 3/8 3/32 50 1/2 40 29.9AAC00014 3/16 7/16 1/8 50 3/8 55 29.9AAC00016 1/4 5/16 1/32 50 1-5/8 15 5AAC00017 1/4 3/8 1/16 50 1 25 20AAC02017 1/4 3/8 1/16 100 1 25 20AAC04017 1/4 3/8 1/16 500 1 25 20AAC00018 1/4 7/16 3/32 50 3/4 35 29.9AAC00019 1/4 1/2 1/8 50 1/2 40 29.9AAC02019 1/4 1/2 1/8 100 1/2 40 29.9AAC00022 5/16 7/16 1/16 50 1-3/8 20 13AAC00023 5/16 1/2 3/32 50 1 30 29.9AAC00024 5/16 9/16 1/8 50 7/8 35 29.9AAC00025 5/16 5/8 5/32 50 3/4 45 29.9AAC00027 3/8 1/2 1/16 50 1-1/2 20 9AAC00028 3/8 9/16 3/32 50 1-3/8 25 21AAC00029 3/8 5/8 1/8 50 1-1/8 30 29.9AAC00032 7/16 9/16 1/16 50 2-1/4 15 7AAC00033 7/16 5/8 3/32 50 1-3/4 20 15AAC00034 7/16 11/16 1/8 50 1-3/8 25 28AAC00036 1/2 5/8 1/16 50 2-7/8 10 5AAC00037 1/2 11/16 3/32 50 2-1/4 20 12AAC02037 1/2 11/16 3/32 100 2-1/4 20 12AAC00038 1/2 3/4 1/8 50 1-1/2 25 21AAC00039 1/2 13/16 5/32 50 1-1/2 30 29.9AAC00041 9/16 3/4 3/32 50 2-1/2 15 9AAC00042 9/16 13/16 1/8 50 2 20 17AAC00045 5/8 13/16 3/32 50 3 15 7AAC00046 5/8 7/8 1/8 50 2-3/8 20 13AAC00047 5/8 15/16 5/32 50 2 25 21AAC00050 11/16 7/8 3/32 50 3-1/2 15 6AAC00053 3/4 1 1/8 50 3-1/4 18 9AAC00054 3/4 1-1/16 5/32 50 2-3/4 20 15AAC00055 3/4 1-1/8 3/16 50 2-3/8 25 21AAC00057 3/4 1-1/4 1/4 50 2 30 29.9AAC00059 7/8 1-1/8 1/8 50 4-1/8 15 7AAC00060 7/8 1-3/16 5/32 50 3-1/2 20 11AAC00062 1 1-1/4 1/8 50 4-3/4 15 5AAC00064 1 1-3/8 3/16 50 4 20 12AAC00065 1 1-1/2 1/4 50 3 25 21AAC00068 1-1/8 1-1/2 3/16 50 4-1/2 18 9AAC00069 1-1/4 1-1/2 1/8 50 7-7/8 12 3AAC00070 1-1/4 1-5/8 3/16 50 5-1/2 15 7AAC00071 1-1/4 1-3/4 1/4 50 4-3/8 20 13AAC00073 1-1/2 1-7/8 3/16 50 7-1/4 15 5AAC00074 1-1/2 2 1/4 50 5-7/8 18 9AAC00076 1-3/4 2-1/4 1/4 50 7-1/2 16 7AAC00078 2 2-1/2 1/4 50 9-3/8 15 5AAC05078 2 2-1/2 1/4 20 9-3/8 15 5



Vacuum SizesAAC00015 3/16 9/16 3/16 50 1/4 60 29.9AAC00020 1/4 5/8 3/16 50 1/2 50 29.9AAC00030 3/8 7/8 1/4 50 5/8 50 29.9AAC00040 1/2 1-1/8 5/16 50 7/8 45 29.9AAC00049 5/8 1-3/8 3/8 50 1 40 29.9AAC00058 3/4 1-1/2 3/8 50 1-1/2 35 29.9AAC00066 1 2 1/2 50 1-7/8 35 29.9AAC05066 1 2 1/2 20 1-7/8 35 29.9

Unipacs (10/10' lengths per carton)AACUN007 1/8 1/4 1/16 10/10' 3/8 45 29.9AACUN012 3/16 5/16 1/16 10/10' 5/8 30 29.9AACUN017 1/4 3/8 1/16 10/10' 1 25 20AACUN019 1/4 1/2 1/8 10/10' 1/2 40 29.9AACUN027 3/8 1/2 1/16 10/10' 1-1/2 20 9AACUN036 1/2 5/8 1/16 10/10' 2.7/8 10 5AACUN053 3/4 1 1/8 10/10' 3-1/4 18 9AACUN062 1 1-1/4 1/8 10/10' 4-3/4 15 5

Vacuum Unipacs (10/10' or 4/10' lengths per carton as shown below)AACUN015 3/16 9/16 3/16 10/10' 1/4 60 29.9AACUN020 1/4 5/8 3/16 10/10' 1/2 50 29.9AACUN030 3/8 7/8 1/4 10/10' 5/8 50 29.9AACUN040 1/2 1-1/8 5/16 10/10' 7/8 45 29.9AACUN049 5/8 1-3/8 3/8 10/10' 1 40 29.9AACUN058 3/4 1-1/2 3/8 10/10' 1-1/2 35 29.9AACUN066 1 2 1/2 4/10' 1-7/8 35 29.9

Metric Sizes

Saint-Gobain I.D. O.D. Wall Length Minimum Maximum Vacuum Part Number (mm) (mm) Thickness (meters) Bend Working Rating, In.

(mm) Radius Pressure of Mercury(mm) at 73˚F (psi)* at 73˚F

AAC1S1502 2 4 1 15 7 40 29.9AAC1S1517 3 5 1 15 13 30 29.9AAC1S1518 4 6 1 15 16 25 21.0AAC1S1503 5 8 1.5 15 19 30 29.9AAC1S1504 6 9 1.5 15 22 25 22.0AAC1S1505 7 10 1.5 15 29 20 15.0AAC1S1506 8 12 2 15 29 25 21.0AAC1S1507 10 14 2 15 42 20 14.0



The values listed for working and burst pressures are derived from testsconducted under controlled laboratory conditions. Many factors will reduce thetubing’s ability to withstand pressures including temperature, chemical attack,stress, pulsation and the attachment to fittings. It is imperative that the userconduct tests simulating the conditions of the application prior to specifying thetubing for use.


Unless otherwise noted, all tests were conducted at room temperature (73˚F). Values shown were determined on 0.075" thick extruded strip or 0.075" thick molded ASTMplaques or molded ASTM durometer buttons.

TYGON® R-3603 Tubing Typical Physical PropertiesProperty ASTM Method Value or Rating


Color - Clear

Tensile Strength, psi (MPa) D412-98 1,650 (11.4)




Water Absorption, % 24 hrs. @ 23˚C D570-98 0.24

Compression Set Constant Deflection, % D395-01 61

@ 158˚F (70˚C) for 22 hrs. Method B


Maximum Recommended - 165 (74)

Operating Temp., ˚F (˚C)


Tensile Modulus,

@ 100% Elongation, psi (MPa) D412-98 650 (4.5)



Features/Benefits• Crystalclarity• Improvedflexibilitywhen comparedtorigid fluoropolymertubings• Chemicallyresistantandinert• Non-contaminatingfluidpath• MeetsFDAcriteriaforfoodcontact

Typical Applications• Chemicalprocessing• Pharmaceuticalprocessing andfilling• Paintandsolventproduction andpackaging• Adhesivetransferlines• Semiconductorprocessing• Photographicprocessing equipment• Beveragedispensing• Inkandtonerfeedlines• Fertilizerandpesticide distribution

FORMULATION SE-200 For the ultimate in chemical resistance, purity, flexibility and clarity

Excellent Chemical ResistanceWithoutsacrificingtheflexibility,glass-likeclarityandoutstandingbendradiusforwhichTygon®tubingisknown,Tygon®InertTubingcanhandlemanyapplicationswhereflexibletubingofthepastcouldnotbeused.ItsFEPinnerlinerprovidestheultimateinchemicalresistanceandcanaccommodateawidevarietyoffluidsfromcorrosivestoMEK-basedsolvents.Theinertlinerlimitspotentialoffluidcontaminationduringtransfer.Tygon®InertTubingwillnotimpartodorortaste,makingitwell-suitedforfoodandbeverageuse.

Tygon®InertTubingcombinesallthebenefitsofTygon®withtheinertnessofafluoropolymer,providingsuperiorperformanceinmanyapplicationsandindustries.

Meets FDA Criteria for Food ContactNon-toxic,taste-freeandodor-free,Tygon®InertTubingmeetsFDA21CFRPart177.1550Criteriaforcontactwithfoodproducts.

TYGON®InertTubing

Chemically resistant and non-contaminating, Tygon® Inert Tubing provides the outstanding clarity and flexibility of Tygon® tubing combined with the inertness of a fluoropolymer.



Tygon® SE-200 Manufactured Sizes and Pressures


TygON® is a Saint-gobain Performance Plastics registered trademark.



*Durometer measured on outer jacket

Tygon® SE-200 TUBIng IS noT To BE USED In VACUUM APPLICATIonS

Tygon® SE-200 Typical Physical Properties

Saint-gobain Wall Minimum Part I.D. o.D. Thickness Length Bend Radius Maximum Working Pressure number (inches) (inches) (inches) (feet) (inches) at 73°F (psi)* at 160°F (psi)*

AJD00002 1/16 1/8 1/32 50 1/2 100 45

AJD00007 1/8 1/4 1/16 50 1 85 40

AJD00012 3/16 5/16 1/16 50 1-1/2 75 38

AJD00017 1/4 3/8 1/16 50 2 55 35

AJD00028 3/8 9/16 3/32 50 3-1/2 50 25

AJD00038 1/2 3/4 1/8 50 4 45 18

AJD00053 3/4 1 1/8 50 4-1/2 30 12

Property ASTMMethod ValueorRating

DurometerHardnessShoreA, 15 Sec D2240 67*

Color - Clear

TensileStrengthpsi(MPa) D412 2000 (13.8)


TearResistancelb-f/inch(kN/m) D1004 165 (29)


WaterAbsorption,% 24hrs.@23˚C D570 <0.01

CompressionSetConstantDeflection, D395 %@158∞F(70∞C)for22hrs. MethodB 53

BrittlenessByImpactTemp.,˚F(˚C) D746 -40 (-40)

MaximumRecommended - 170 (77) OperatingTemp.,˚F(˚C)

DielectricStrengthv/mil(kV/mm) D149 620 (24.4)

TensileModulus, D412 @100%Elongation,psi(MPa) 650 (4.5) @300%Elongation,psi(MPa) 1450 (3.1)



The values listed for working and burst pressures are derived from tests conducted under controlledlaboratory conditions. Many factors will reduce the tubing’s ability towithstand pressures includingtemperature,chemicalattack,stress,pulsationandtheattachmenttofittings. Itisimperativethattheuserconducttestssimulatingtheconditionsoftheapplicationpriortospecifyingthetubingforuse.

www.tygon.com

Fittings for Tygon® SE-200 Tubing

SinglebarbinsertfittingsarerecommendedforusewithTygon®SE-200tubing.

Singlebarbinsertfittingshavealandbehindthebarbthatallowsaclamptobefastenedoverthetubing(seepicturebelow).Note:Pleasebesurenottoover-tightentheclampasitmightresultindamagetothetubing.

Also:Tofacilitateentryofthefittingintothetubing,theoutsidediameterattheendofthetaperedfittingmustbesmallerthantheinsidediameter.

Tubingwall

Tubingwall Singlebarbinsert

Clamp


Is Your Tubing Protected Against Microbes?Microorganismsarelivingcellssosmallthatmostcanonlybeseenwithamicroscope.Microbesareatypeofmicroorganismfoundeverywhere,andincludebacteria,fungiandalgae.Themajorityofmicrobesdonotinterferewithhumanactivities.However,insomesituationstheycancauseproblems.Growthofmicrobesonmanymaterialscanleadtofoulodors,discolorationandformationofmildewandbiofilm.Inthecaseoftubing,microbescancontaminatethematerialbeingtransferredaswellasdegradethetubingitself.

Leader in Antimicrobial TechnologySaint-GobainPerformancePlasticsistheleaderinantimicrobialtechnology.Ourcustomcompoundingcapabilitiesallowustoproduceantimicrobialversionsofmanyofourtubingproducts,includingTygon®.Tygon®SilverAntimicrobialTubingisformulatedwithasilverbasedcompoundontheinnersurfaceatthepointoffluidcontact;thetubingoutersurfacecanbetreatedincaseswherebacteriabuildupontheO.D.isaconcern.

Adds ValueCleaningprocedures,suchaswashingwithdetergentandhotwater,cankillmicrobes.Butthisprocesscanbetimeconsumingandcostly,anddoesnotprovideresidualprotectionagainstfreshcontamination.Theadditionaluseofadurableandsafeantimicrobialtreatmentisthebestwaytoprovideprotectionagainstmicrobialcontamination.Offeringyourcustomerthisaddedprotectionaddsvaluetoyourproduct.

Tygon®SilverAntimicrobialtubingmeetsFDA21CFR,177.1520criteriaforfoodcontactapplications.

Features/Benefits• Plasticizer-freeinnerbore• Formulatedwithasilver-based

compoundonI.D.surface• O.D.surfacecanalsobe

formulatedwithasilverbasedcompound

• Reducesformationofbiofilmandmildew

• Inhibitsgrowthofmicrobes• Willnotdiscolor• MeetsFDAcriteria• MeetsNSF51criteria

Typical Applications• Foodandbeverage• Icemachines• Waterpurification• Waterbottlestraws• Environmental• Chemical• Dairy• Lab

TYGON®SILVER

Tygon® Silver Antimicrobial Tubing decreases bacterial growth and provides added value.

Antimicrobial Tubing

Colonies formed by viable bacteria after exposure to AlphaSan® treated (left) and untreated (right) polymer.

NEW



IMPORTANT:Itistheuser’sresponsibilitytoensurethesuitabilityandsafetyofSaint-GobainPerformancePlasticstubingforallintendeduses.Laboratoryandclinicaltestsmustbeconductedinaccordancewithapplicableregulatoryrequirementsinordertodeterminethesafetyandeffectivenessforuseoftubinginanyparticularapplication.Foraperiodof6monthsfromthedateoffirstsale,Saint-GobainPerformancePlasticsCorporationwarrantsthisproducttobefreefromdefectsinmaterialsandworkmanship.Ouronlyobligationwillbetoreplaceanyportionprovingdefectiveoratouroptiontorefundthepurchasepricethereof.Userassumesallotherrisk,ifany,includingtheriskofinjury,lossordamage,directorconsequential,arisingoutoftheuse,misuseorinabilitytousethisproduct.THISWARRANTYISINLIEUOFTHEWARRANTIESOFMERCHANTABILITY,FITNESSFORPARTICULARPURPOSE,ANDALLOTHERWARRANTIES,EXPRESSEDORIMPLIED.Nodeviationisauthorized.Saint-GobainPerformancePlasticsCorporationassumesnoobligationsorliabilityforanyadvicefurnishedbyit,orforresultsobtainedwithrespecttothoseproducts.Allsuchadviceisgivenandacceptedatthebuyer’srisk.

TygON® is a Saint-gobain Performance Plastics registered trademark

ALPhASAN® is a Milliken Chemical registered trademark

©2007 Saint-GobainPerformancePlasticsCorporationFLS3286-2.5M-0307-SGCS www.tygon.com

Tygon® Silver Manufactured Sizes and Pressures Saint-gobain Wall Minimum Minimum Max. Working Vacuum Rating, Part I.D. o.D. Thickness Length (feet) Bend Radius Pressure In. of Mercury number (inches) (inches) (inches) (inches) at 73ºF (psi)* at 73ºF

AS600007 1/8 1/4 1/16 50 1/2 65 29.9

AS600012 3/16 5/16 1/16 50 3/4 50 29.9

AS600017 1/4 3/8 1/16 50 3/4 40 29.9

AS600027 3/8 1/2 1/16 50 1-1/2 30 25.0

AS600038 1/2 3/4 1/8 50 1-3/4 38 29.9*Working pressures are calculated at a 1:5 ratio relative to burst pressure using ASTM D1599.

Tygon® Silver Typical Physical Properties Property ASTM Value or Method Rating

DurometerHardness D2240 72 ShoreA,15 Sec Color — Translucent Silver TensileStrength D412 2,300 (15.8) psi(MPa)(atbreak) UltimateElongation,% D412 240 TearResistance D1004 190 (33.3) lb-f/inch(kN/m) SpecificGravity D792 1.20 WaterAbsorption,% D570 <0.01 24 hrs.@23ºC CompressionSetConstant D395 71 Deflection,% MethodB @158ºF(70ºC)for22hrs. BrittlenessByImpact D746 -47 (-44) Temp.,ºF(ºC) MaximumRecommended — 160 (71) OperatingTemp.,ºF(ºC) TensileModulus, D412 910 (6.3) @ 100%Elongation, psi(MPa) TensileSet,% D412 65

Unless otherwise noted, all tests were conducted at room temperature (73º F). Values shown were determined on 0.075" thick extruded strip or 0.075" thick molded ASTM plaques or molded ASTM durometer buttons.

Relative Chemical Resistance Properties* Tubing Acids Bases Salts Alcohols Ketones Conc. Med. Weak Conc. Med. Weak

Tygon®Silver F E E F E E E E F Fluoroelastomers E E E U F F E F U Urethane U U U U F F F U U PVC F E E E E E E F U ThermoplasticRubber U F F F E E E F U Neoprene U F E E E E E E U NitrileRubber F F E U E E E E U Silicone U U U U F F F F U EVA U F E F E E E E UE=ExcellentF=FairU=Unsatisfactory*All tests conducted at room temperatures. Refer to the comprehensive Tygon® catalog for an expanded listing of chemical resistance.

How it WorksAlphaSan®,theantimicrobialpolymercompoundusedbySaint-Gobain,isazirconiumphosphate-basedceramicion-exchangeresincontainingsilver.Silverisrecognizedasbeingsafeforhumancontactandisanintegralpartofantimicrobialadditivesthatprovidethefollowingbenefits:•Inhibitoryactivityagainstawiderangeofmicroorganisms,improvingcontaminationcontrol.•Consistentantimicrobialimpactthroughsilverionexchange,notjustduringcleaningprocedures.•AntimicrobialpolymercompoundisEPAFIFRAregisteredforcontactwithfoodanddrinkingwater,andalsoFDAapprovedforfoodpackaging.

ApplicationsSilverisknowntobeeffectiveagainstabroadspectrumofmicroorganismsthatcausediscoloration,odor,biofoulingandotheraestheticproblems.Antimicrobialpolymercompoundcanbeaddedtoapprovedmaterialsatvaryinglevelstoimpartfungistatic,bacteriostaticandalgistaticpropertiestothematerialandtheend-useproduct.Thehightemperaturestabilityandlowcolorformationofantimicrobialpolymercompoundstranslatetoprovenperformanceinawidevarietyofapplications.


Features/Benefits• DEHP free• Long flex life in peristaltic pumps• Temperature resistant up to 250°F• Low extractables• Meets FDA and NSF 51 criteria• Alternative to PVC

Typical Applications• Ink transfer• Soap and detergent delivery• Cold or hot beverage transfer

and dispensing• Food processing• Laboratory applications

requiring long pump life and/or low extractables

• General chemical transfer and processing

FORMULATION XL-60Long life pump tubing for a variety of applications

Superior Performance in Peristaltic PumpsDesigned specifically for use in peristaltic pump applications, Tygoprene®Pump Tubing maintains a pump life of over 500 hours. With a durometerhardness of Shore A 60, it is extremely flexible and exhibits superior flex life,reducing downtime due to pump tubing failure (see “Comparative PeristalticPump Tubing Life” chart on back of page). Tygoprene® Pump Tubing can beconsidered an alternative to silicones and PVC when longer pump tubing life is required.

Excellent Physical PropertiesTygoprene® Pump Tubing is translucent in color and has excellent chemicalresistance to a wide range of fluids, including acids and bases. It also exhibitsexcellent resistance to ozone, oxygen and sunlight aging. Tygoprene® PumpTubing remains flexible at -40°F and is temperature resistant up to 250°F.Tygoprene® Pump Tubing complies with FDA 21 CFR, 177.1210 criteria, which areapplicable for food contact applications, and is NSF listed under standard 51.It has also passed the UL 94-HB flammability resistance classification.

Low ExtractablesTygoprene® Pump Tubing has low extractables, greatly reducing the risk of fluid contamination in applications such as ink transfer. It does not imparttaste to fluids being transferred, making it an ideal choice for food andbeverage applications.

TYGOPRENE® Pump Tubing

Tygoprene® Pump Tubing provides flexibility and long life in peristaltic pumps.

NEW


Tubing Material Carbon Dioxide Nitrogen OxygenTygoprene® XL-60 Tubing 1,116 62 186

Silicone Tubing 42,800 3,900 8,025



TYGOPRENE® XL-60 Inventoried Sizes

TYGOPRENE® is a Saint-Gobain Performance Plastics registered trademark.


Unless otherwise noted, all tests were conducted at room temperature (73˚F). Values shown weredetermined on 0.075" thick extruded strip or 0.075" thick molded ASTM plaques or molded ASTMdurometer buttons.

*Values based on static oven test at 0 psi.

Permeability Coefficient (x10-11) cc • cm / cm2 • s • cmHg

Permeability Coefficient = amount of gas (cm3) x tubing wall thickness (cm) surface area of tubing ID (cm2) x time (seconds) x pressure drop across tubing wall (cmHg)

E = Excellent G = Good F = Fair U = Unsatisfactory*All tests conducted at room temperature

TYGOPRENE® XL-60 Typical Physical Properties

Relative Permeability CoefficientsRelative Chemical Resistance Properties

Saint-Gobain Wall Length Minimum Max. Working Vacuum Rating,Part I.D. O.D. Thickness (feet) Bend Pressure In. of Mercury

Number (inches) (inches) (inches) (inches) Radius at 73°F (psi)* at 73°F

AN800003 1/16 3/16 1/16 50 1/2 35 29.9

AN800007 1/8 1/4 1/16 50 1/2 20 29.9

AN800012 3/16 5/16 1/16 50 3/4 13 29.9

AN800017 1/4 3/8 1/16 50 1 15 29.9

AN800022 5/16 7/16 1/16 50 1-1/2 11 20.0

AN800027 3/8 1/2 1/16 50 2 11 15.0

AN800038 1/2 3/4 1/8 50 2-1/2 15 29.9

AN800046 5/8 7/8 1/8 50 3 11 20.0

AN800053 3/4 1 1/8 50 4 11 20.0



Color - Translucent



Tear Resistance lb-f/inch (kN/m) D1004-03 190 (33.3)


Water Absorption, % D570-98 0.0724 hrs. @ 23˚C

Compression Set Constant Deflection, % D395-03 55@ 158˚F (70˚C) for 22 hrs. Method B


Maximum Recommended - 250 (121)Temperature*, ˚F (˚C)


Tensile Modulus,@ 100% Elongation, psi (MPa) D412-98 555 (3.83)



The table below depicts hours until failure of 1/4" ID x 3/8" ODtubing. In each case, a 3-roller pump head operating at 600 rpmunder room temperature (73˚F) conditions was utilized. Tubingfailure is measured in hours of use prior to rupture.


Tubing Acids BasesConc. Med. Weak Conc. Med. Weak

Tygoprene® Tubing G G E G G E

PVC Tubing F E E E E E

Silicone Tubing U U U U F F

The performance of tubing in peristaltic pumping applications isaffected by the conditions of use and equipment utilized, alongwith size and wall thickness of the tubing tested. The data above ispresented for information only and should not be utilized forspecification purposes.

0 50 500 10000 100 200 300 400 500 600

Tygoprene®Tubing

PVCTubing

SiliconeTubing

0 psi back pressure 10 psi back pressure

500 hours500+ hours

60 hours65 hours

50 hours75 hours

www.tygon.com

The values listed for working and burst pressures are derived from testsconducted under controlled laboratory conditions. Many factors will reducethe tubing’s ability to withstand pressures including temperature, chemicalattack, stress, pulsation and the attachment to fittings. It is imperative thatthe user conduct tests simulating the conditions of the application prior tospecifying the tubing for use.


Features/Benefits• Consistentlytight dimensionaltolerances• Excellentabrasion andtearresistance• Excellentresistance tooils,greasesandfuels• Retainsflexibilityin sub-zeroenvironments• Hightearresistance• MeetsFDAcriteria

Typical Applications• Foodandcosmeticprocessing• Abrasiveandviscous slurrytransfer• Lubricationand degreaserdispensing• Pelletandpowdertransfer• Pneumaticsensorydevices• Instrumentationcontrollines• Coolantrecoverysystems

FORMULATION C-210-A For polyurethane applications requiring tight dimensional tolerances

Exceptional Properties OurrigidlycontrolledmanufacturingprocessmakesTygothane®PrecisionPolyurethaneTubingtheflexiblepolyurethanetubingthathasconsistentlytighttolerancesfromlottolot.Madeoftoughester-basedpolyurethane,Tygothane®PrecisionPolyurethaneTubing’sclarity,hightearstrengthandexcellentabrasionresistancemakeitidealformanyapplications,includingfuelandlubricantlines,pneumaticlines,abrasiveproducttransferandcablejacketing.Italsooffersexceptionalresistancetooils,greases,fuelsandmanychemicals.

Abletowithstandruggeddailyuse,Tygothane®PrecisionPolyurethaneTubingresistsweatheringandcanbesafelyusedintemperaturesrangingfrom-100˚F(-73˚C)to200˚F(93˚C).ItmeetsFDA21 CFR, 177.1680 and177.2600criteriaforfoodandbeverageuseandisalsoavailableinether-basedandmedical-gradeformulations.

Excellent Stability Even When Exposed to Oils, Greases and FuelsWhilemanyrubberandplasticmaterialsexhibitresistancetocertainsolvents,oilsandchemicals,Tygothane®tubingwillresistamuchwiderrangeofsubstances.

Plasticizerextractionleadingtoembrittlementisoneofthemostfrequentcausesoffailurewhenflexibletubingsareexposedtoharshchemicals.Tygothane®PrecisionPolyurethaneTubingisplasticizer-freeandremainsflexibleevenwhencycledthroughtemperatureextremes.

Easy and Secure Attachment to FittingsTygothane®PrecisionPolyurethaneTubing’sprecisiontolerancesandhighelasticityprovidetheuserwithaneasy,worry-freeattachmenttofittings.

TYGOTHANE®PrecisionPolyurethaneTubing

With close dimensional tolerances and outstanding elasticity, Tygothane® Precision Polyurethane Tubing provides worry-free attachment to fittings.



Tygothane® C-210-A Manufactured Sizes and Pressures


TygOThANE® is a Saint-gobain Performance Plastics registered trademark.


TygoTHAnE® TUBIng IS noT InTEnDED FoR USE AS An IMPLAnT MATERIAL

Saint-gobain Wall Minimum Max. Working Vacuum Rating, Part I.D. o.D. Thickness Length Bend Pressure In. of Mercury number (inches) (inches) (inches) (feet) Radius at 73°F at 175°F at 73°F at 175°F (inches) (psi)* (psi)*

AEM02002 1/16 1/8 1/32 100 3/16 70 40 29.9 29.9 AEM02006 1/8 3/16 1/32 100 1/2 45 25 29.9 29.9 AEM02007 1/8 1/4 1/16 100 5/16 74 45 29.9 29.9 AEM02011 3/16 1/4 1/32 100 1 34 19 29.9 20.0 AEM02012 3/16 5/16 1/16 100 5/8 56 33 29.9 29.9 AEM02013 3/16 3/8 3/32 100 7/16 70 44 29.9 29.9 AEM02016 1/4 5/16 1/32 100 1-9/16 28 12 20.0 5.0 AEM02017 1/4 3/8 1/16 100 15/16 42 25 29.9 29.9 AEM02018 1/4 7/16 3/32 100 11/16 58 28 29.9 29.9 AEM02019 1/4 1/2 1/8 100 9/16 70 45 29.9 29.9 AEM02022 5/16 7/16 1/16 100 1-15/16 36 22 29.9 29.9 AEM02027 3/8 1/2 1/16 100 1-3/4 34 19 29.9 25.0 AEM02028 3/8 9/16 3/32 100 1-5/16 45 27 29.9 29.9 AEM02029 3/8 5/8 1/8 100 1-1/16 54 33 29.9 29.9 AEM02033 7/16 5/8 3/32 100 1-11/16 40 21 29.9 29.9 AEM02034 7/16 11/16 1/8 100 1-3/8 49 29 29.9 29.9 AEM02036 1/2 5/8 1/16 100 2-7/8 26 14 20.0 5.0 AEM02037 1/2 11/16 3/32 100 2-1/8 36 18 29.9 29.9 AEM02038 1/2 3/4 1/8 100 1-3/4 46 27 29.9 29.9 AEM02044 5/8 3/4 1/16 100 4-1/8 24 11 10.0 5.0 AEM02045 5/8 13/16 3/32 100 3 32 16 29.9 15.0 AEM02046 5/8 7/8 1/8 100 2-3/8 38 21 29.9 29.9 AEM02052 3/4 15/16 3/32 100 4 26 13 15.0 5.0 AEM02053 3/4 1 1/8 100 3-1/4 33 20 29.9 25.0 AEM02059** 7/8 1-1/8 1/8 100 4-1/8 30 18 29.9 20.0 AEM02062 1 1-1/4 1/8 100 5-1/8 28 14 15.0 10.0


Tygothane® C-210-A Typical Physical Properties


DurometerHardnessShoreA,1Sec D2240 82 Color - TransparentNatural TensileStrengthpsi(MPa) D412 6,050 (41.7) UltimateElongation,% D412 500 TearResistancelb-f/inch(kN/m) D1004 475 (83.1) D624 400 (70) DieC SpecificGravity D792 1.20 WaterAbsorption,%24hrs.@23˚C D570 1.12 CompressionSetConstantDeflection, D395 68 %@158˚F(70˚C)for 22hrs. MethodB BrittlenessByImpactTemp.,˚F(˚C) D746 -100 (-73)MaximumRecommendedOperatingTemp.,˚F(˚C) - Intermittent 200 (93) Prolonged 175 (79)DielectricStrengthv/mil(kV/mm) D149 330 (12.9)TensileModulus, D412 @100%Elongation,psi(MPa) 800 (5.5) @ 300%Elongation,psi(MPa) 1,500 (10.4) TensileSet,% D412 98

* Working pressures are calculated at a 1:5 ratio relative to burst pressure using ASTM D1599.** Made to order, minimums will apply.

Thevalueslistedforworkingandburstpressuresarederivedfromtestsconductedundercontrolledlaboratoryconditions.Manyfactorswillreducethetubing’sabilitytowithstandpressuresincludingtemperature,chemicalattack,stress,pulsationandtheattachmenttofittings.Itisimperativethattheuserconducttestssimulatingtheconditionsoftheapplicationpriortospecifyingthetubingforuse.

www.tygon.com


Features/Benefits• Exceptionalabrasion andtearresistance• Toughbraidreinforcement forelevatedworkingpressures• Excellentresistanceto oils,greasesandfuels• Retainsflexibilityin sub-zeroenvironments• MeetsFDAcriteriafor foodcontact• MeetsNSF61criteriafor potablewatercontact*

Typical Applications• Foodandcosmeticprocessing• Abrasiveandviscous slurrytransfer• Lubricationanddegreaser dispensing• Pelletandpowdertransfer• Pneumaticsensorydevices• Instrumentationcontrollines• Coolantrecoverysystems

*NSF has length restrictions, determined by tubing size, for NSF 61 applications.

FORMULATION C-544-A I.B.

Precision Polyurethane Pressure Tubing

Designed and Constructed to Optimize PerformanceSpeciallyformulatedfromtoughether-basedpolyurethaneresins,Tygothane®PressureTubingisidealforuseinsomeofthemostphysicallydemandingapplications.Whenexposedtoabrasiveconditions,theexcellentwearpropertiesofTygothane®tubingfrequentlyoutperformtraditionalrubber,plasticandmetalmaterials.

Moreflexiblethanmanyotherreinforcedurethanetubings,Tygothane®tubingcanoftenbeusedinapplicationsrequiringatightbendradiuswhereothertubingshavecollapsedandfailed.Tygothane®PressureTubingalsoretainsmuchofitsuniqueflexibilityevenattemperaturesaslowas-100˚F(-73˚C).

Tygothane®PressuretubingmeetsFDA21CFR,177.1680and177.2600criteriaforfoodcontactapplications.

Excellent Stability Whilemanyrubberandplasticmaterialsexhibitresistancetocertainsolvents,oilsandchemicals,Tygothane®tubingwillresistamuchwiderrangeofsubstances.

Plasticizerextractionleadingtoembrittlementisoneofthemostfrequentcausesoffailurewhenflexibletubingsareexposedtoharshchemicals.Tygothane®PressureTubingisplasticizer-freeandremainsflexibleevenwhencycledthroughtemperatureextremes.

Large Bore Stock Sizes Ideal for Bulk TransferReinforcedforelevatedpressure,Tygothane®PressureTubingcaneasilyhandleapplicationsrequiringlargevolumetransferofhighviscosityfluids,pastesandslurries.Itisconvenientlyavailablefrominventoryinawidevarietyofcommonsizesupto2"innerdiameter.

TYGOTHANE®

The excellent wear properties of Tygothane® Pressure Tubing make it ideal for use in physically demanding environments.



www.tygon.com

Tygothane® C-544-A I.B. Manufactured Sizes and Pressures


Tygothane® is a registered trademark.

©2007 Saint-GobainPerformancePlasticsFLS3290-2.5M-0307-SGCS

The values listed for working and burst pressures are derived from tests conducted under controlledlaboratory conditions. Many factors will reduce the tubing’s ability to withstand pressures includingtemperature,chemicalattack,stress,pulsationandtheattachmenttofittings.Itisimperativethattheuserconducttestssimulatingtheconditionsoftheapplicationpriortospecifyingthetubingforuse.

Unless otherwise noted, all tests were conducted at room temperature (73°F). Values shown were determined on 0.075" thick extruded strip or 0.075" thick molded ASTM plaques or molded ASTM durometer buttons.

TygoTHAnE® TUBIng IS noT InTEnDED FoR USE AS An IMPLAnT MATERIAL

Tygothane® C-544-A I.B. Typical Physical Properties

Saint-gobain Wall Minimum Max. Working Vacuum Rating, Part I.D. o.D. Thickness Length Bend Pressure In. of Mercury number (inches) (inches) (inches) (feet) Radius at 73°F at 180°F at 73°F at 180°F (inches) (psi)* (psi)*

AZY02008 1/8 3/8 1/8 100 1/4 420 220 29.9 29.9

AZY02014** 3/16 7/16 1/8 100 1/2 240 125 29.9 29.9

AZY02019 1/4 1/2 1/8 100 3/4 275 150 29.9 29.9

AZY02029 3/8 5/8 1/8 100 1-1/2 205 115 29.9 29.9

AZY02038 1/2 3/4 1/8 100 2 195 110 29.9 29.9

AZY02046 5/8 7/8 1/8 100 3 175 105 29.9 25.0

AZY02054 3/4 1-1/16 5/32 100 3-1/2 150 100 29.9 25.0

AZY02064 1 1-3/8 3/16 100 4-3/4 120 80 29.9 15.0

AZY00071 1-1/4 1-3/4 1/4 50 6 95 65 29.9 20.0

AZY00074 1-1/2 2 1/4 50 7-1/2 80 50 29.9 15.0

AZY00078 2 2-1/2 1/4 50 13 70 40 15.0 10.0


DurometerHardnessShoreA,1Sec D2240 85

Color — Clear

TensileStrengthpsi(MPa) D412 5,000 (34.5)


TearResistancelb-f/inch(kN/m) D1004 350 (61.3)


WaterAbsorption,%24hrs.@23°C D570 1.80

CompressionSetConstantDeflection, D395 19 %@158°F(70°C)for22 hrs. MethodB

BrittlenessByImpactTemp.,°F(°C) D746 -100 (-73)

MaximumRecommendedOperating — 180 (82) Temp.,°F(°C)

DielectricStrength,v/mil(kV/mm) D149 550 (21.6)

TensileModulus,psi(MPa) D412 @100%Elongation 800 (5.5) @300%Elongation 1,200 (8.3)


* Working pressures are calculated at a 1:4 ratio relative to burst pressure using ASTM D1599. ** Made to order, minimums will apply.

www.tygon.com


Non-plasticized inner bore yields no tasteVendflow® E-70-V-CE is specifically formulated to transfer water and beverageswithout imparting any “plastic” taste sometimes found in PVC tubing. It isproduced with a smooth, plasticizer free, hydrophobic inner surface to helpmaintain fluid purity. In addition, it meets FDA requirements for food contact,ensuring the safety of the user.

Great PerformanceVendflow® E-70-V-CE is made by the leading manufacturer of specialty tubingfor the food and beverage industries. It’s exceptionally flexible, allowing fortight bends and easy installation on dispensing units. Its special constructionwill ensure a long tubing life, lessening the need for constant replacement.

Vendflow® E-70-V-CE can be custom made to meetany specificationVendflow® can be produced in a variety of sizes and lengths. Color matches orsamples are available upon request. Our in-house compounding capabilitiesallow us to produce Vendflow® E-70-V-CE in many hardnesses and a variety ofcolors, either opaque or translucent. Its clarity allows for easy flow-monitoring.

VENDFLOW®

Features/Benefits• Plasticizer free fluid pathway• No taste• Smooth inner surface• Extremely low absorption rate• Custom colors, sizes and lengths• High clarity• Meets FDA requirements for

food contact• Hydrophobic inner surface reduces

taste transfer

Taste Barrier TubingFormulation E-70-V-CE

NEW

Saint-Gobain Performance Plastic’s new Vendflow® E-70-V-CE is specially made forwater and beverage transfer applications with strict taste requirements.


Saint-Gobain Performance Plastics2664 Gilchrist RoadAkron, OH 44305Tel: (330) 798-9240Toll Free: (800) 798-1554Fax: (330) 798-6968

FLS-????-?M-0402-SGCS www.tygon.com ©2002 Saint-Gobain Performance Plastics Corporation

IMPORTANT: It is the user’s responsibility to ensure the suitability and safety of Saint-Gobain Performance Plastics Corporation tubing for all intended uses. Laboratory and clinical testsmust be conducted in accordance with applicable regulatory requirements in order to determine the safety and effectiveness for use of tubing in any particular application.LIMITED WARRANTY: For a period of 6 months from the date of first sale, Saint-Gobain Performance Plastics Corporation warrants this product to be free from defects in materials andworkmanship. Our only obligation will be to replace any portion proving defective, or at our option, to refund the purchase price thereof. User assumes all other risk, if any, including the risk ofinjury, loss or damage, direct or consequential, arising out of the use, misuse, or inability to use, this product. THIS WARRANTY IS IN LIEU OF THE WARRANTIES OF MERCHANTABILITY, FITNESS FORPARTICULAR PURPOSE, AND ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED. No deviation is authorized.Saint-Gobain Performance Plastics Corporation assumes no obligations or liability for any advice furnished by it, or for results obtained with respect to those products. All such advice isgiven and accepted at the buyer's risk.

Typical physical properties Vendflow® E-70-V-CE

Unless otherwise noted, all tests were conducted at room temperature (73˚F). Values shown were determined on0.075" thick extruded strip or 0.075" thick molded ASTM plaques or molded ASTM durometer buttons.

Vendflow® is a registered trademark.

Burst Pressure, psi @ 73˚F (23˚C) ASTM Method Value or Rating1/4" ID X 3/8" OD D1599 2055/16" ID X 7/16" OD D1599 200

Bend Radius Rating (inch)1/4" ID X 3/8" OD 3/45/16" ID X 7/16" OD 1.0

Product CharacteristicsOpacity ClearFDA Approved for Food Contact Yes

Quotations for tubing and profiles available upon request

Property ASTM Method Value or RatingDurometer Hardness (Shore A), 15s D2240-00 72 +/-5Tensile Strength, psi (MPa) D412-98 2300 (15.8)Ultimate Elongation, % D412-98 240Brittle Temperature, ˚F (˚C) D746-98 -47 (-44)Specific Gravity D792-00 1.2Water Absorption, % 24 hrs at 73˚F (23˚C)(liner material) D570-98 <0.01Maximum Recommended Operating Temperature ˚F (˚C) –– 160 (71)Color –– Clear


Features/Benefits• Provides Resiliency, Long Life and

Durability

• Ultra-Smooth Inner Bore ReducesRisk of Particulate Entrapment

• Taste and Odor Free

• Withstands Temperature ExtremesFrom -75°F to 350°F

• Meets USP Class VI and FDA Criteria

Typical Applications• Veterinary Pharmaceuticals

• Respiratory and AnesthesiaEquipment

• Sterile Filling and Processing

• Analytical Instrumentation

• Cosmetic Production

• Environmental Remediation

• Beverage Dispensing


• Appliance Manufacturing

• Electronic Equipment

VERSILIC™ SPX-50 High Strength Silicone Tubing


Designed for Demanding RequirementsPeroxide-cured Versilic™ Silicone Tubing Formulation SPX-50 is designed for use inapplications where flexibility, resiliency and durability are required. Produced from aproprietary combination of silicone elastomers, Versilic Silicone Tubing optimizes criticalphysical properties such as tensile strength, elongation and compression set, resulting in amore physically durable product. Its smooth inner surface reduces the risk of particulateentrapment and microscopic buildup during fluid transfer.

Consistently Reliable ResultsEvery lot of raw material used in the manufacture of Versilic Silicone Tubing undergoes aseries of in-house physical property testing before use. This stringent evaluation ofingredients helps to provide the repeatable quality found in every foot of Versilic SiliconeTubing. Annual testing on actual tubing samples is performed for reaffirmation ofadherence to USP Class VI Criteria. Heavy metals extraction analysis, as well as, cytotoxicitytesting is performed to confirm the tubing’s biocompatibility.

Complies with Regulatory GuidelinesVersilic Silicone Tubing complies fully with the requirements of the USP Class VI Criteria andis entirely non-toxic, non-hemolytic and non-pyrogenic. It also meets 3-A SanitaryStandards, FDA 21 CFR Part 177.2600 Criteria and NSF 51 Standard.

Saint-Gobain Performance Plastics:The Leader in Silicone Tubing InnovationVersilic Silicone Tubing provides versatility in use for a broad range of applications.However, for situations requiring uniquely engineered properties, Saint-GobainPerformance Plastics can design a formulation suited to meet your specific needs. Specialtyformulations may be designed to provide a combination of features, including ultra-hightemperature resistance, electrical conductivity, closed cell sponge, pigmented colors andlong flexural life.

High-strength siliconetubing ideal forveterinary, medical andpharmaceuticalapplications

Versilic™ tubing, produced from a proprietary combination of silicone elastomers,provides durability and versatility in a range of applications.


Saint-Gobain Performance Plastics3910 Industrial DriveBeaverton, MI 48612

Tel: (989) 435-9533

Tel: (888) 387-0067

Fax: (989) 435-2355


Come through clean.SM

Versilic™ is a trademark.

VERSILIC™ Silicone TubingTypical Physical PropertiesProperty ASTM Value or

Method Rating

Durometer Hardness D2240-91 50

Shore A, 15 SecColor — TranslucentTensile Strength D412-92 1,500 (10.3)

psi (MPa)Ultimate Elongation, % D412-92 450

Tear Resistance D624-91 148 (26)

lb-f/inch (kN/m) Die BSpecific Gravity D792-91 1.17

Water Absorption, % D570-81 0.06

24 hrs. @ 23°CCompression Set D395-89

Constant Deflection, % Method B@ 158°F (70°C) for 22 hrs. 10

@ 347°F (175°C) for 22 hrs. 33

Brittleness by D746-79 -112 (-80)

Impact Temp., °F (°C)Maximum Recommended — 350 (177)

Operating Temp.,°F (°C) Continuous400 (204)

IntermittentDielectric Strength D149-93 480

v/mil (kV/mm) (19)

Tensile Modulus, @ 200% D412-92 425

Elongation, psi (MPa) (2.9)


Unless otherwise noted, all tests were conducted at roomtemperature (73°F). Values shown were determined on 0.075" thickextruded strip or 0.075" thick molded ASTM plaques or molded ASTMdurometer buttons.

VERSILIC™ SPX-50 Silicone TubingManufactured Sizes and Pressures

Minimum Max. WorkingWall Bend Pressure

Part I.D. O.D. Thickness Length Radius at 73°F at 320°F Number (inches) (inches) (inches) (feet) (inches) (psi) * (psi)*

ABX00001 1/32 3/32 1/32 50 1/8 22 21

ABX00002 1/16 1/8 1/32 50 1/4 14 13

ABX00003 1/16 3/16 1/16 50 1/4 22 21

ABX00004 3/32 5/32 1/32 50 1/4 11 10

ABX00005 3/32 7/32 1/16 50 1/4 18 16

ABX00006 1/8 3/16 1/32 50 3/8 9 8

ABX00007 1/8 1/4 1/16 50 1/2 14 13

ABX00009 5/32 7/32 1/32 50 3/4 7 6

ABX00011 3/16 1/4 1/32 50 1 7 6

ABX00012 3/16 5/16 1/16 50 1/2 11 10

ABX00013 3/16 3/8 3/32 50 3/8 14 13

ABX00014 3/16 7/16 1/8 50 3/8 18 16

ABX00016 1/4 5/16 1/32 50 1-1/2 5 4

ABX00017 1/4 3/8 1/16 50 3/4 9 8

ABX00018 1/4 7/16 3/32 50 5/8 12 11

ABX00019 1/4 1/2 1/8 50 5/8 14 13

ABX00022 5/16 7/16 1/16 50 1-1/4 7 6

ABX00023 5/16 1/2 3/32 50 5/8 10 9

ABX00024 5/16 9/16 1/8 50 3/4 7 6

ABX00027 3/8 1/2 1/16 50 1-1/2 9 8

ABX00028 3/8 9/16 3/32 50 1 11 10

ABX00029 3/8 5/8 1/8 50 1 6 5

ABX00033 7/16 5/8 3/32 50 1-3/4 8 7

ABX00036 1/2 5/8 1/16 50 3 5 4

ABX00037 1/2 11/16 3/32 50 1-3/4 7 6

ABX00038 1/2 3/4 1/8 50 1-1/2 9 8

ABX00045 5/8 13/16 3/32 50 3 6 5

ABX00046 5/8 7/8 1/8 50 2-1/2 7 6

ABX00053 3/4 1 1/8 50 2-1/2 7 6

ABX42062 1 1-1/4 1/8 25 5 5 4

ABX42069 1-1/4 1-1/2 1/8 25 6 5 4

ABX42074 1-1/2 2 1/4 25 7 6 5

VERSILIC SILICONE TUBING IS NOT INTENDEDFOR USE AS AN IMPLANT MATERIAL

The values listed for working and burst pressures are derived from tests conducted undercontrolled laboratory conditions. Many factors will reduce the tubing’s ability to withstandpressures, including temperature, chemical attack, stress, pulsation and the attachment tofittings. It is imperative that the user conduct tests simulating the conditions of the applicationprior to specifying the tubing for use.

VERSILIC™Tubing

Sterilization MethodsAutoclavable in steamGas — Ethylene OxideRadiation — Gamma or E-Beam




N/E = Not Established, N/A = Not Applicable, N/R = Not Required, N/D = Not Determined Page 1 of 4

MATERIAL SAFETY DATA SHEET Product: Norprene A-60-F-IB

Manufacturers Name: Saint-Gobain Emergency Telephone Number: Performance Plastics Call ChemTel: Address: 1-800-255-3924 USA 2664 Gilchrist Rd. 1-813-248-0585 International Akron, Ohio 44305 Date Prepared: 4/17/08

SECTION 1 - IDENTITY

1.1 Common Name (used on label): Norprene A-60-F-IB (Innerbraid) 1.2 Chemical Name...........................: N/A 1.3 Chemical Family.........................: Thermoplastic Rubber 1.4 Formula.......................................: The specific chemical identity of the ingredients

is considered a trade secret.

SECTION 2 - HAZARDOUS INGREDIENTS

2.1 Principal Hazardous Component(s) (Chemical & Common Names) Threshold Limit Value N/A 2.2 Principal Non-Hazardous Component(s) (Chemical & Common Names) Threshold Limit Value a. Thermoplastic rubber N/A

SECTION 3 - PHYSICAL & CHEMICAL CHARACTERISTICS (Fire & Explosion Data)

3.1 Boiling Point..............................: N/A 3.2 Specific Gravity (H2O=1).........: 0.98 3.3 Vapor Pressure..........................: N/A 3.4 Percent Volatile by Volume......: N/A 3.5 Vapor Density (Air=1)..............: N/A 3.6 Evaporation Rate.......................: N/A 3.7 Solubility in Water....................: Insoluble 3.8 Melting Point.............................: N/A 3.9 Appearance and Odor...............: Natural color innerbraid tubing; Slight odor. 3.10 Flash Point................................: >650°F (343°C) Form #N0123.1




3.11 Flammable Limits in Air by Volume.................................: Lower: N/A Upper: N/A 3.12 Auto-Ignition Temperature..: N/A 3.13 Extinguisher Media...............: Water spray or Class A extinguishing media. 3.14 Special Fire Fighting Procedures: Fire fighters should wear full protective clothing including a self-contained breathing apparatus. 3.15 Unusual Fire & Explosion Hazards...............................: None Known

SECTION 4 - PHYSICAL HAZARDS

4.1 Stability....................................: Stable: X Unstable: Conditions to Avoid...............: Keep away from strong oxidizers. 4.2 Incompatibility........................: May react with strong oxidizing agents. 4.3 Hazardous Decomposition Products..............................: Smoke, CO, and possibly hydrocarbons may evolve when temperature exceeds 260°C or when ignited. 4.4 Hazardous Polymerization....: May Occur: Will Not Occur: X Conditions to Avoid...............: None Known

SECTION 5 - HEALTH HAZARDS

5.1 Threshold Limit Value...........: N/E 5.2 Sign & Symptoms of Exposure: 1. Acute Overexposure.....: Toxicological testing has not been conducted with this material. Route of Entry: Eye Contact: No toxic effects are expected. Skin Contact: No toxic effects are expected. Inhalation: Not expected in industrial use. Ingestion: Not expected in industrial use. 2. Chronic Overexposure..: None Known Form #N0123.1




5.3 Medical Conditions Generally

Aggravated by Exposure...: There are no data available which address medical conditions which are generally recognized as being aggravated by exposure to this product.

5.4 Chemical Listed as Carcinogen or Potential Carcinogen..........: National Toxicology Program: Yes: No: X I.A.R.C. Monographs: Yes: No: X OSHA: Yes: No: X 5.5 OSHA Permissible Exposure Limit....................................: N/A 5.6 ACGIH Threshold Limit Value: N/E 5.7 Other Exposure Limit Used...: Unknown 5.8 Emergency & First-Aid Procedures..........................: Inhalation: N/A Eyes: N/A Skin: N/A Ingestion: N/A

SECTION 6 - SPECIAL PROTECTION INFORMATION

6.1 Respiratory Protection............: N/R unless temperature exceeds 260°C - See Section 4. 6.2 Ventilation...............................: Local Exhaust: N/R Mechanical-General: N/R Mechanical-Special: N/R Mechanical-Other: N/R 6.3 Protective Gloves....................: N/R 6.4 Eye Protection.........................: N/R 6.5 Other Protective Clothing or Equipment......................: Not Necessary Form #N0123.1




SECTION 7 - SPECIAL PRECAUTIONS AND SPILL/LEAK PROCEDURES

7.1 Precautions to be taken in Handling & Storage...........: Handle in accordance with good industrial hygiene and safety practices. 7.2 Other Precautions...................: N/A 7.3 Steps to be Taken in Case Material is Released or Spilled.........: N/A 7.4 Waste Disposal Methods........: According to Local, State and Federal Regulations.

SECTION 8 - OTHER INFORMATION

8.1 Transportation Information...: DOT Shipping Name: N/A DOT Hazard Class: N/A DOT Label(s): N/A UN/NA Number: N/A Placards: None IATA: N/A IMO IMDG-Code: N/A European Class: RID (OCTI): N/A ADR (ECE): N/A RAR (IATA): N/A 8.2 The information and recommendations set forth herein are taken from sources believed to be accurate as of the date hereof; however, Saint-Gobain Performance Plastics Corporation makes no warranty with respect to the accuracy of the information or the suitability of the recommendations, and assumes no liability to any user thereof. Form #N0123.1



MATERIAL SAFETY DATA SHEET Product: Norprene A-60-F



1.1 Common Name (used on label): Norprene A-60-F 1.2 Chemical Name...........................: N/A 1.3 Chemical Family.........................: Thermoplastic Rubber 1.4 Formula.......................................: The specific chemical identity of the ingredients

is considered a trade secret.


2.1 Principal Hazardous Component(s) (Chemical & Common Names) Threshold Limit Value N/A 2.2 Principal Non-Hazardous Component(s) (Chemical & Common Names) Threshold Limit Value a. Thermoplastic rubber N/A


3.1 Boiling Point..............................: N/A 3.2 Specific Gravity (H2O=1).........: 0.98 3.3 Vapor Pressure..........................: N/A 3.4 Percent Volatile by Volume......: N/A 3.5 Vapor Density (Air=1)..............: N/A 3.6 Evaporation Rate.......................: N/A 3.7 Solubility in Water....................: Insoluble 3.8 Melting Point.............................: N/A 3.9 Appearance and Odor...............: Natural color tubing; Slight odor. 3.10 Flash Point................................: >650°F (343°C) Form #N0123.1


3.11 Flammable Limits in Air by



Volume.................................: Lower: N/A Upper: N/A 3.12 Auto-Ignition Temperature..: N/A 3.13 Extinguisher Media...............: Water spray or Class A extinguishing media. 3.14 Special Fire Fighting Procedures: Fire fighters should wear full protective clothing including a self-contained breathing apparatus. 3.15 Unusual Fire & Explosion Hazards...............................: None Known


4.1 Stability....................................: Stable: X Unstable: Conditions to Avoid...............: Keep away from strong oxidizers. 4.2 Incompatibility........................: May react with strong oxidizing agents. 4.3 Hazardous Decomposition Products..............................: Smoke, CO, and possibly hydrocarbons may evolve when temperature exceeds 260°C or when ignited. 4.4 Hazardous Polymerization....: May Occur: Will Not Occur: X Conditions to Avoid...............: None Known


5.1 Threshold Limit Value...........: N/E 5.2 Sign & Symptoms of Exposure: 1. Acute Overexposure.....: Toxicological testing has not been conducted with this material. Route of Entry: Eye Contact: No toxic effects are expected. Skin Contact: No toxic effects are expected. Inhalation: Not expected in industrial use. Ingestion: Not expected in industrial use. 2. Chronic Overexposure..: None Known Form #N0123.1






5.4 Chemical Listed as Carcinogen or Potential Carcinogen..........: National Toxicology Program: Yes: No: X I.A.R.C. Monographs: Yes: No: X OSHA: Yes: No: X 5.5 OSHA Permissible Exposure Limit....................................: N/A 5.6 ACGIH Threshold Limit Value: N/E 5.7 Other Exposure Limit Used...: Unknown 5.8 Emergency & First-Aid Procedures..........................: Inhalation: N/A Eyes: N/A Skin: N/A Ingestion: N/A


6.1 Respiratory Protection............: N/R unless temperature exceeds 260°C - See Section 4. 6.2 Ventilation...............................: Local Exhaust: N/R Mechanical-General: N/R Mechanical-Special: N/R Mechanical-Other: N/R 6.3 Protective Gloves....................: N/R 6.4 Eye Protection.........................: N/R 6.5 Other Protective Clothing or Equipment......................: Not Necessary Form #N0123.1





7.1 Precautions to be taken in Handling & Storage...........: Handle in accordance with good industrial hygiene and safety practices. 7.2 Other Precautions...................: N/A 7.3 Steps to be Taken in Case Material is Released or Spilled.........: N/A 7.4 Waste Disposal Methods........: According to Local, State and Federal Regulations.


8.1 Transportation Information...: DOT Shipping Name: N/A DOT Hazard Class: N/A DOT Label(s): N/A UN/NA Number: N/A Placards: None IATA: N/A IMO IMDG-Code: N/A European Class: RID (OCTI): N/A ADR (ECE): N/A RAR (IATA): N/A 8.2 The information and recommendations set forth herein are taken from sources believed to be accurate as of the date hereof; however, Saint-Gobain Performance Plastics Corporation makes no warranty with respect to the accuracy of the information or the suitability of the recommendations, and assumes no liability to any user thereof. Form #N0123.1



MATERIAL SAFETY DATA SHEET Product: Norprene A-60-G



1.1 Common Name (used on label): Norprene A-60-G 1.2 Chemical Name...........................: N/A 1.3 Chemical Family.........................: Thermoplastic Rubber 1.4 Formula.......................................: The specific chemical identity of the ingredients is considered a trade secret.


2.1 Principal Hazardous Component(s) (Chemical & Common Names) Threshold Limit Value N/A 2.2 Principal Non-Hazardous Component(s) (Chemical & Common Names) Threshold Limit Value a. Thermoplastic Rubber (TPR) N/A


3.1 Boiling Point..............................: N/A 3.2 Specific Gravity (H2O=1).........: 0.98 3.3 Vapor Pressure..........................: N/A 3.4 Percent Volatile by Volume......: N/A 3.5 Vapor Density (Air=1)..............: N/A 3.6 Evaporation Rate.......................: N/A 3.7 Solubility in Water....................: Negligible 3.8 Melting Point.............................: N/A 3.9 Appearance and Odor...............: Black tubing, Slight odor. 3.10 Flash Point................................: >650°F (343°C) Form #N0123.1




3.11 Flammable Limits in Air by Volume.................................: Lower: N/A Upper: N/A 3.12 Auto-Ignition Temperature..: N/A 3.13 Extinguisher Media...............: Water spray or Class A extinguishing media. 3.14 Special Fire Fighting Procedures: Fire fighters should wear full protective clothing including a self-contained breathing apparatus. 3.15 Unusual Fire & Explosion Hazards...............................: None Known


4.1 Stability....................................: Stable: X Unstable: Conditions to Avoid...............: Keep away from strong oxidizing chemicals. 4.2 Incompatibility........................: May react with strong oxidizers. 4.3 Hazardous Decomposition Products..............................: Smoke, CO, and possibly hydrocarbons may evolve when temperature exceeds 260°C or when ignited. 4.4 Hazardous Polymerization....: May Occur: Will Not Occur: X Conditions to Avoid...............: None Known


5.1 Threshold Limit Value...........: N/E 5.2 Sign & Symptoms of Exposure: 1. Acute Overexposure.....: Toxicological testing has not been conducted with this material. Route of Entry: Eye Contact: N/A Skin Contact:. N/A Inhalation:. N/A Ingestion:. N/A 2. Chronic Overexposure..: None Known Form #N0123.1






5.4 Chemical Listed as Carcinogen or Potential Carcinogen..........: National Toxicology Program: Yes: No: X I.A.R.C. Monographs: Yes: No: X OSHA: Yes: No: X 5.5 OSHA Permissible Exposure Limit....................................: N/E 5.6 ACGIH Threshold Limit Value: N/E 5.7 Other Exposure Limit Used...: Unknown 5.8 Emergency & First-Aid Procedures..........................: Inhalation: N/A Eyes:. N/A Skin: N/A Ingestion: N/A


6.1 Respiratory Protection............: N/R 6.2 Ventilation...............................: Local Exhaust: N/R Mechanical-General: N/R Mechanical-Special: N/R Mechanical-Other: N/R 6.3 Protective Gloves....................: N/R 6.4 Eye Protection.........................: N/R 6.5 Other Protective Clothing or Equipment......................: Not Necessary Form #N0123.1





7.1 Precautions to be taken in Handling & Storage...........: Store cool and dry. 7.2 Other Precautions...................: N/A 7.3 Steps to be Taken in Case Material is Released or Spilled.........: N/A 7.4 Waste Disposal Methods........: According to Local, State and Federal Regulations.


8.1 Transportation Information...: DOT Shipping Name: N/A DOT Hazard Class: N/A DOT Label(s): N/A UN/NA Number: N/A Placards: None IATA: N/A IMO IMDG-Code: N/A European Class: RID (OCTI): N/A ADR (ECE): N/A RAR (IATA): N/A 8.2 The information and recommendations set forth herein are taken from sources believed to be accurate as of the date hereof, however, Saint-Gobain Performance Plastics Corporation makes no warranty with respect to the accuracy of the information or the suitability of the recommendations, and assumes no liability to any user thereof. Form #N0123.1






Lack of fulfillment of conditions as set out in the Certification Agreement may render this Certificate invalid.

DET NORSKE VERITAS CERTIFICATION B.V. ZWOLSEWEG 1, 2994 LB BARENDRECHT, THE NETHERLANDS, TEL: +31 10 2922 688 - WWW.DNVBA.COM

DNV BUSINESS ASSURANCE MANAGEMENT SYSTEM CERTIFICATE

Certificate No. 103980-2011-AQ-USA-RvA Certificate No. 104200-2011-AE-USA-RvA

This is to certify that

Saint-Gobain NorPro at

1500 Independence Avenue, Bryan TX 77803 USA Additional Locations:

Site Address Site City Site State Site Main Activities

216 Igou Ferry Road Soddy Daisy TN 37379 Manufacturing

5300 Gerber Road Fort Smith AR 72904 Manufacturing

3840 Fishcreek Road Stow OH 44224 Management, Purchasing, Sales and R&D

has been found to conform to the Management System Standard:

ISO 9001:2008 / ISO 14001:2004

This Certificate is valid for the following product or service ranges:

THE DESIGN, DEVELOPMENT, MANUFACTURE AND SALE OF INDUSTRIAL CERAMICS

Initial Certification date: October 05, 2011

Place and date:

Houston, Texas, October 05, 2011

This Certificate is valid until:

October 05, 2014

for the Accredited Unit:

DNV CERTIFICATION B.V., THE NETHERLANDS

The audit has been performed under the supervision of

Bob Faust Chandran Ilango Lead Auditor Management Representative


Saint Gobain Tygon Complete Catalog

Documents

b sugar

annex i of regulation

sugar products

proprietary substances

regulation ec

gilchrist road akron

polyvinyl chloride tygon

following products