What’s in the box? What do I need to fit it? How to install the VHF on desktop and overhead How to install the VHF flush mount INSTALLATION GUIDE SAILOR 6222 VHF DSC Thrane & Thrane A/S • [email protected]• www.thrane.com 98-132281-A How to install the handset Power Drill Jigsaw Screwdriver TORX 20 Drill for M4 or Ø3.9 self-tapping U-Mounting Bracket Transceiver Gasket Flush Mount Bracket (2 pcs.) Fuse 6.3x3.2mm (10AT) Cradle Wheel Knob (2 pcs.) Screw M4x45 TORX 20 (5 pcs.) Square Nut M4x7x2.2 (5 pcs.) Screw M4x12 TORX 20 (2 pcs.) Screw ø3.9x19 TORX 20 (2 pcs.) Screw M4x12 TORX 20 (5 pcs.) Screw ø3.9x19 TORX 20 (5 pcs.) Handset Very important information! Do not remove the membrane. If you remove the membrane the radio will not be waterproof. This Handset has a hook-on/off function, which is activated by a small magnet embedded in the cradle. The cradle must be installed as illustrated in order to ensure the hook-on/off functionality of the Handset. 75mm 62mm 226mm * 120mm min. 100mm Space for handset access Space for cable and handset cable 54mm 45mm 135mm 39655C Tilting ±20° Dimentions for the SAILOR 6222 VHF DSC Cap for LTW RJ45 Connector Cap for LTW BD/BU Connector Fuse 6.3x3.2mm (10AT) Screw M4x12 TORX 20 (4 pcs.) Screw ø3.9x19 TORX 20 (4 pcs.) SAILOR 6090 Power Converter User Manual Emergency Call SAILOR VHF and MF/HF SAILOR 6222 VHF DSC Power Cable
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
DIDIDIDIDISSSSSTRETRETRETRETRESSSSSSSSSS and C and C and C and C and COMOMOMOMOMMMMMMUNICUNICUNICUNICUNICAAAAATTTTTIONIONIONIONIONFREQUENCIEFREQUENCIEFREQUENCIEFREQUENCIEFREQUENCIESSSSS
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _Remember to use the correct HF-proceduresDon‘t forget your EPIRB is the secondary means ofalerting
IMPIMPIMPIMPIMPORORORORORTTTTTANANANANANT!T!T!T!T!If this template was printed from an electronicfile or copied, scaling (1:1) may not be correct.Consequently do not attempt to use a printedor copied template without prior checking ofdimensions.
System Configuration - Example
Drilling plan on desktop and overhead How to install the SAILOR 6090 Power Converter
Drilling plan
99-131985
200mm
53mm
71mm
247mm
9mm
4 x M4 or hole for
self-tapping ø3.9
23.5mm
For further information, pleasedownload the installation manual partno. 98-132904 from www.thrane.com/ssc