TIPS TO FOLLOW WHEN USING OSCILLATING MULTI-TOOLS 5
Feb 13, 2020
OSCILLATING MULTI-TOOLS CAN BE USE TO:
• Cut• Scrape• Sand• Slice• They can do this on a wide range of materials including wood, metal, cardboard, and plastic, etc.
#1 – FOLLOW USER MANUAL
• Do not begin without reading the manual.
• Refer to the manual when attaching accessories or performing various tasks.
• Not using the manual invalidates the warranty.
#2 – WEAR PROTECTIVE GEAR
• Protect your eyes from fine dust with safety glasses.
• Use earmuffs to protect your ears from loud sounds.
• Wear gloves to protect your hands from injury.
#3 – AVOID USING THE TOOL IN WET AREAS
• Prevent fire hazards by keeping the tool away from water.
• Ensure water sources are turned off if you are working near them.
• Keep the work area dry.
#4 – STORE THE MULTI-TOOLSAFELY
• Keep the tool away from children.
• Store it in a cool, dry place away from the sun.
• Remove batteries and oscillating tool blades• when not in use.
#5 – TO CHANGE THE BLADE
• Switch off the tool and unplug it.
• Do not unplug the cord by pulling it.
• Allow the blade to cool before removing it.
Visit - https://fitzallblades.com/