E7 E7 E7 E7 E7 E7 E7 E7 E7 E7 E7 E7 E7 E7 Safety Switches Series 8146/5-V37 8150/5-V37 www.stahl.de Load Disconnect Switches and Motor Starters E7/1 2014-02-24·EK00·III·en Series 8146/5-V37 8150/5-V37 E7 00653E00 WebCode 8146L > 3- and 6-pole safety switches 10, 12 / 16, 20, 25, 40, 63 / 80, 125 / 160, 180 A > Motor switching capacity AC-3 and AC-23 acc. to IEC 60947-3, EN 60947, DIN VDE 0660 Part 107 > With or without load-shedding contact > Positive opening operation of the main contacts > Isolating characteristics acc. to IEC/EN 60947-1 / -3 > Padlockable in "OFF" position with padlocks > Rotary actuator with clear switching position > High level of corrosion resistance in external components > Marked with signal orange label "Safety Switch" Safety switches ensure the obligatory isolation of electrical power during cleaning, maintenance and repair of the equipment. Other methods of isolation, e.g. removal of fuses or disconnection of motors, which require qualified electricians, are unnecessary. Class I ATEX / IECEx (NEC 505) (NEC 506) Class I Class II Class III Zone 0 1 2 20 21 22 Zone 0 1 2 20 21 22 Division 1 2 1 2 1 2 For use in x x x x For use in x For use in x Explosion Protection Global (IECEx) Gas and dust 8146/5: IECEx PTB 06.0090 8150/5: IECEx PTB 09.0049 8146/5: Ex d e ia/ib [iaGa] mb q IIA, IIB, IIC T6, T5, T4 Gb 8150/5: Ex d e ia/ib [iaGa] mb q IIA, IIB, IIC T6, T5, T4,T3 Gb 8146/5: Ex tb IIA, IIB, IIC T80°C, T95°C, T130°C Db 8150/5: Ex tb IIIC T80°C, T95°C, T130°C, T135°C Db Europe (ATEX) Gas and dust 8146/5: PTB 01 ATEX 1024 8150/5: PTB 09 ATEX 1109 8146/5: E II 2 G Ex d e ia ib [ia Ga] mb q IIA, IIB, IIC T6, T5, T4 Gb 8150/5: E II 2 G Ex d e ia/ib [ia Ga] mb q IIA, IIB, IIC T6, T5, T4, T3 Gb 8146/5: E II 2 D Ex tb IIIA, IIIB, IIIC T80°C, T95°C, T130°C Db IP66 8150/5: E II 2 D Ex tb IIIC T80°C, T95°C, T130°C, T135°C Db IP66 (marking on rating plate possible) Certifications and certificates Certificates IECEx, ATEX
21
Embed
Safety Switches Series 8146/5-V37 8150/5-V37rstahl.hu/uploads/files/8146_5_V37_biztonsági kapcsolók(1).pdf · Series 8146/5-V37 8150/5-V37 ... EN 60947, DIN VDE 0660 Part 107 >
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
E7
E7
E7
E7
E7
E7
E7
E7
E7
E7
E7
E7
E7
E7
Safety SwitchesSeries 8146/5-V37 8150/5-V37
ww
w.s
tah
l.d
e
Load Disconnect Switches and Motor Starters E7/12014-02-24·EK00·III·en
> Motor switching capacity AC-3 and AC-23 acc. to IEC 60947-3, EN 60947, DIN VDE 0660 Part 107
> With or without load-shedding contact
> Positive opening operation of the main contacts
> Isolating characteristics acc. to IEC/EN 60947-1 / -3
> Padlockable in "OFF" position with padlocks
> Rotary actuator with clear switching position
> High level of corrosion resistance in external components
> Marked with signal orange label "Safety Switch"
Safety switches ensure the obligatory isolation of electrical power during cleaning, maintenance and repair of the equipment. Other methods of isolation, e.g. removal of fuses or disconnection of motors, which require qualified electricians, are unnecessary.
Class I
ATEX / IECEx (NEC 505) (NEC 506) Class I Class II Class III
Global (IECEx)Gas and dust 8146/5: IECEx PTB 06.0090
8150/5: IECEx PTB 09.00498146/5: Ex d e ia/ib [iaGa] mb q IIA, IIB, IIC T6, T5, T4 Gb8150/5: Ex d e ia/ib [iaGa] mb q IIA, IIB, IIC T6, T5, T4,T3 Gb8146/5: Ex tb IIA, IIB, IIC T80°C, T95°C, T130°C Db8150/5: Ex tb IIIC T80°C, T95°C, T130°C, T135°C Db
Europe (ATEX)Gas and dust 8146/5: PTB 01 ATEX 1024
8150/5: PTB 09 ATEX 11098146/5: E II 2 G Ex d e ia ib [ia Ga] mb q IIA, IIB, IIC T6, T5, T4 Gb8150/5: E II 2 G Ex d e ia/ib [ia Ga] mb q IIA, IIB, IIC T6, T5, T4, T3 Gb8146/5: E II 2 D Ex tb IIIA, IIIB, IIIC T80°C, T95°C, T130°C Db IP668150/5: E II 2 D Ex tb IIIC T80°C, T95°C, T130°C, T135°C Db IP66(marking on rating plate possible)
Certifications and certificatesCertificates IECEx, ATEX
Safety Switches 10 ASeries 8146/5-V37 8150/5-V37
Load Disconnect Switches and Motor Starters 2014-02-24·EK00·III·enE7/2
Selection Table
Version Enclosure material
Equipment Cable dia. range [mm]
Switch Order number Weight
Colour Additional device
kg
10 A, 3-pole Polyester resin
black handle, black protecti-ve collar
-- 2 x 13 ... 21 (M32), 1 x 6 ... 13 (M20)
1 NO (ON delayed - OFF leading)
8146/5-V37-300-50-0050 1.700
Polyester resin
red handle, yellow protec-tive collar
-- 2 x 13 ... 21 (M32), 1 x 6 ... 13 (M20)
1 NO (ON delayed - OFF leading)
8146/5-V37-300-50-1050 1.700
Technical Data
Design Safety switch 10 AMechanical data
Degree of protection IP66 acc. to IEC/EN 60529Enclosure cover In ON position removable, in OFF position lockableHandle Can be locked with 3 padlocks in 0-position
Mounting / InstallationCable entries Standard: In polyamide, Series 8161
Special: In metalMain contacts
Electrical dataRated operational voltage 690 V ACRated insulation voltage 750 V Rated impulse withstand voltage
6 kV
Rated operational current 10 ASwitching capacity acc. to IEC/EN 60947-3; DIN VDE 0660, Part 107
1) 1 conducting path2) 2 conducting paths connected in series3) 3 conducting paths connected in series
Service life of electrical / mechanical parts
> 105 operations
Max. short-circuit protection
16 A, tripping characteristic: gG according to IEC/EN 60291-1
Auxiliary contactsElectrical data
Rated operating voltage 400 V ACRated operational current 6 A
Mechanical dataSwitch 1 NO (ON delayed - OFF advanced)
Load Disconnect Switches and Motor Starters E7/32014-02-24·EK00·III·en
1) Engineering note:The maximum conductor cross-sections given were determined using the H07V. The minimum bending radius was assumed to be 4 x outer diameter in accordance with VDE 0298-3.2) only with heat-resistant cable > 70 °C on cable entries or/and > 85 °C on clamping pointsBold: specifications on the type plate
Ambient conditions Safety switches 10 A
Type8146/5-V37-
No. of poles max. current [A] Conductor cross-section 1) [mm2] Temperature class /Perm. ambient temperature
Degree of protection IP66 acc. to IEC/EN 60529Enclosure cover In ON position removable, in OFF position lockableHandle Can be locked with 3 padlocks in 0-position
Mounting / InstallationCable entries Standard: In polyamide, Series 8161
Special: In metalMain contacts
Electrical dataRated operational voltage 690 V ACRated insulation voltage 750 V Rated impulse withstand voltage
6 kV
Rated operational current 12 / 16 ASwitching capacity acc. to IEC/EN 60947-3; DIN VDE 0660, Part 107
1) 1 conducting path2) 2 conducting paths connected in series3) 3 conducting paths connected in series
Service life of electrical / mechanical parts
> 105 operations
AC-3 AC-3Ue I P I P 230 V ~400 V ~440 V ~500 V ~690 V ~
12 A12 A12 A12 A12 A
3.0 kW5.5 kW5.5 kW5.5 kW7.5 kW
16 A16 A16 A16 A16 A
4.0 kW7.5 kW7.5 kW7.5 kW11.0 kW
DC-1 DC-13 (L/R = 300 ms)Ue I Ue I220 V 6 A3) 230 V 0.4 A
Load Disconnect Switches and Motor Starters 2014-02-24·EK00·III·enE7/4
1) Engineering note:The maximum conductor cross-sections given were determined using the H07V. The minimum bending radius was assumed to be 4 x outer diameter in accordance with VDE 0298-3.2) only with heat-resistant cable > 70 °C on cable entries or/and > 85 °C on clamping pointsBold: specifications on the type plate
Max. short-circuit protection
25 A (Ie = 16 A); 16 A (Ie = 12 A), triggering characteristics: gG acc. to IEC/EN 60291-1
Auxiliary contactsElectrical data
Rated operating voltage 400 V ACRated operational current 6 A
Mechanical dataSwitch 1 NO (ON delayed - OFF advanced)
Load Disconnect Switches and Motor Starters E7/52014-02-24·EK00·III·en
Selection Table
Version Enclosure material
Equipment Cable dia. range [mm]
Switch Order number Weight
Colour Additional device
kg
16 A, 3-pole Polyester resin
black handle, black protecti-ve collar
-- 2 x 13 ... 21 (M32), 1 x 6 ... 13 (M20)
1 NO (ON delayed - OFF leading)
8146/5-V37-302-50-0050 1.590
red handle, yellow protec-tive collar
-- 2 x 13 ... 21 (M32), 1 x 6 ... 13 (M20)
1 NO (ON delayed - OFF leading)
8146/5-V37-302-50-1050 1.590
red handle, yellow protec-tive collar
with N-terminal
2 x 13 ... 21 (M32), 1 x 6 ... 13 (M20)
1 NO (ON delayed - OFF leading)
8146/5-V37-302-50-1150 1.590
stainless steel 1.4404
black handle, black protecti-ve collar
-- 2 x 13 ... 21 (M32), 1 x 6 ... 13 (M20)
1 NO (ON delayed - OFF leading)
8150/5-V37-302-50-0010 3.250
red handle, yellow protec-tive collar
-- 2 x 13 ... 21 (M32), 1 x 6 ... 13 (M20)
1 NO (ON delayed - OFF leading)
8150/5-V37-302-50-1010 3.250
16 A, 6-pole Polyester resin
black handle, black protecti-ve collar
-- 2 x 13 ... 21 (M32), 1 x 6 ... 13 (M20)
2 NO (1 x ON delayed - OFF leading)
8146/5-V37-602-60-0010 2.640
red handle, yellow protec-tive collar
-- 2 x 13 ... 21 (M32), 1 x 6 ... 13 (M20)
2 NO (1 x ON delayed - OFF leading)
8146/5-V37-602-60-1010 2.640
Technical Data
Design Safety switch 16 AMechanical data
Degree of protection IP66 acc. to IEC/EN 60529Enclosure cover In ON position removable, in OFF position lockableHandle Can be locked with 3 padlocks in 0-position
Mounting / InstallationCable entries Standard: In polyamide, Series 8161
Special: In metalMain contacts
Electrical dataRated operational voltage 690 V ACRated insulation voltage 690 V Rated operational current 16 ASwitching capacity acc. to IEC/EN 60947-3; DIN VDE 0660, Part 107
1) 1 conducting path2) 2 conducting paths connected in series3) 3 conducting paths connected in series
Service life of electrical / mechanical parts
> 105 operations
Max. short-circuit protection
25 A, triggering characteristics: gG acc. to IEC/EN 60291-1
AC-3Ue I P 230 V ~400 V ~440 V ~500 V ~690 V ~
16 A16 A16 A16 A16 A
4.0 kW7.5 kW7.5 kW7.5 kW11.0 kW
DC-1, DC-23 DC-13 (L/R = 300 ms)Ue I Ue I220 V120 V60 V
16 A3)
16 A2)
16 A1)
250 V125 V60 V
1.1 A2.2 A5.0 A
Safety Switches 16 ASeries 8146/5-V37 8150/5-V37
Load Disconnect Switches and Motor Starters 2014-02-24·EK00·III·enE7/6
1) Engineering note:The maximum conductor cross-sections given were determined using the H07V. The minimum bending radius was assumed to be 4 x outer diameter in accordance with VDE 0298-3.2) only with heat-resistant cable > 70 °C on cable entries or/and > 85 °C on clamping pointsBold: specifications on the type plate
Auxiliary contactsElectrical data
Rated operating voltage 500 V ACRated operational current 10 A
Mechanical dataSwitch 3-pole: 1 NO (ON delayed - OFF advanced)
6-pole: 2 NO (1 x ON delayed - OFF advanced / 1 x switching normally)Mounting / Installation
Load Disconnect Switches and Motor Starters E7/72014-02-24·EK00·III·en
Selection Table
Version Enclosure material
Equipment Cable dia. range [mm]
Switch Order number Weight
Colour Additional device
kg
20 A, 3-pole Polyester resin
black hand-le, black pro-tective collar
-- 2 x 13 ... 21 (M32), 1 x 6 ... 13 (M20)
1 NO (ON de-layed - OFF leading)
8146/5-V37-303-50-0010 2.020
Polyester resin
red handle, yellow pro-tective collar
-- 2 x 13 ... 21 (M32), 1 x 6 ... 13 (M20)
1 NO (ON de-layed - OFF leading)
8146/5-V37-303-50-1010 2.020
Technical Data
Design Safety switch 20 AMechanical data
Degree of protection IP66 acc. to IEC/EN 60529Enclosure cover In ON position removable, in OFF position lockableHandle Can be locked with 3 padlocks in 0-position
Mounting / InstallationCable entries Standard: In polyamide, Series 8161
Special: In metalMain contacts
Electrical dataRated operational voltage 690 V ACRated insulation voltage 690 V Rated operational current 20 ASwitching capacity acc. to IEC/EN 60947-3; DIN VDE 0660, Part 107
1) 1 conducting path2) 2 conducting paths connected in series3) 3 conducting paths connected in series
Service life of electrical / mechanical parts
> 105 operations
Max. short-circuit protection
35 A, triggering characteristics: gG acc. to IEC/EN 60291-1
Auxiliary contactsElectrical data
Rated operating voltage 500 V ACRated operational current 10 A
DC-1, DC-23 DC-13 (L/R = 300 ms)Ue I Ue I220 V120 V60 V
20 A3)
20 A2)
20 A1)
250 V125 V60 V
1.1 A2.2 A5.0 A
Safety Switches 20 ASeries 8146/5-V37 8150/5-V37
Load Disconnect Switches and Motor Starters 2014-02-24·EK00·III·enE7/8
1) Engineering note:The maximum conductor cross-sections given were determined using the H07V. The minimum bending radius was assumed to be 4 x outer diameter in accordance with VDE 0298-3.2) only with heat-resistant cable > 70 °C on cable entries or/and > 85 °C on clamping pointsBold: specifications on the type plate
Load Disconnect Switches and Motor Starters E7/92014-02-24·EK00·III·en
Selection Table
Version Enclosure material
Equipment Cable dia. range [mm]
Switch Order number Weight
Colour Additional device
kg
25 A, 3-pole Polyester resin
black hand-le, black pro-tective collar
-- 2 x 13 ... 21 (M32), 1 x 6 ... 13 (M20)
1 NO (ON de-layed - OFF lea-ding)
8146/5-V37-304-50-0010 1.960
Polyester resin
red handle, yellow pro-tective collar
-- 2 x 13 ... 21 (M32), 1 x 6 ... 13 (M20)
1 NO (ON de-layed - OFF lea-ding)
8146/5-V37-304-50-1010 2.020
Polyester resin
red handle, yellow pro-tective collar
withN-terminal
2 x 13 ... 21 (M32), 1 x 6 ... 13 (M20)
1 NO (ON de-layed - OFF lea-ding)
8146/5-V37-304-50-1110 2.020
stainless steel 1.4404
black hand-le, black pro-tective collar
-- 2 x 13 ... 21 (M32), 1 x 6 ... 13 (M20)
1 NO (ON de-layed - OFF lea-ding)
8150/5-V37-304-50-0010 3.300
stainless steel 1.4404
red handle, yellow pro-tective collar
-- 2 x 13 ... 21 (M32), 1 x 6 ... 13 (M20)
1 NO (ON de-layed - OFF lea-ding)
8150/5-V37-304-50-1010 3.300
25 A, 6-pole Polyester resin
black hand-le, black pro-tective collar
-- 2 x 13 ... 21 (M32), 1 x 6 ... 13 (M20)
2 NO (1 x ON delayed - OFF leading)
8146/5-V37-604-60-0010 2.790
Polyester resin
red handle, yellow pro-tective collar
-- 2 x 13 ... 21 (M32), 1 x 6 ... 13 (M20)
2 NO (1 x ON delayed - OFF leading)
8146/5-V37-604-60-1010 2.790
Technical Data
Design Safety switch 25 AMechanical data
Degree of protection IP66 acc. to IEC/EN 60529Enclosure cover In ON position removable, in OFF position lockableHandle Can be locked with 3 padlocks in 0-position
Mounting / InstallationCable entries Standard: In polyamide, Series 8161
Special: In metalMain contacts
Electrical dataRated operational voltage 690 V ACRated insulation voltage 690 V Rated operational current 25 ASwitching capacity acc. to IEC/EN 60947-3; DIN VDE 0660, Part 107
1) 1 conducting path2) 2 conducting paths connected in series3) 3 conducting paths connected in series
Service life of electrical / mechanical parts
> 105 operations
Max. short-circuit protection
35 A, triggering characteristics: gG acc. to IEC/EN 60291-1
Auxiliary contactsElectrical data
Rated operating voltage 500 V ACRated operational current 10 A
DC-1, DC-23 DC-13 (L/R = 300 ms)Ue I Ue I220 V120 V60 V
25 A3)
25 A2)
25 A1)
250 V125 V60 V
1.1 A2.2 A5.0 A
Safety Switches 25 ASeries 8146/5-V37 8150/5-V37
Load Disconnect Switches and Motor Starters 2014-02-24·EK00·III·enE7/10
1) Engineering note:The maximum conductor cross-sections given were determined using the H07V. The minimum bending radius was assumed to be 4 x outer diameter in accordance with VDE 0298-3.2) only with heat-resistant cable > 70 °C on cable entries or/and > 85 °C on clamping pointsBold: specifications on the type plate
Ambient conditions Safety switches 25 A
Type8146/5-V37-
No. of poles max. current [A] Conductor cross-section 1) [mm2] Temperature class /Perm. ambient temperature
Load Disconnect Switches and Motor Starters E7/112014-02-24·EK00·III·en
Selection Table
Version Enclosure material
Equipment Cable dia. range [mm]
Switch Order number Weight
Colour Additional device
kg
40 A, 3-pole Polyester resin
black hand-le, black pro-tective collar
-- 2 x 17 ... 28 (M40), 1 x 6 ... 13 (M20)
-- 8146/5-V37-305-00-0010-K 5.560
Polyester resin
black hand-le, black pro-tective collar
-- 2 x 17 ... 28 (M40), 1 x 6 ... 13 (M20)
1 NO (1 x ON delayed - OFF leading), 1 NC
8146/5-V37-305-51-0010-K 5.560
Polyester resin
red handle, yellow pro-tective collar
-- 2 x 17 ... 28 (M40), 1 x 6 ... 13 (M20)
1 NO (1 x ON delayed - OFF leading), 1 NC
8146/5-V37-305-51-1010-K 4.620
Polyester resin
red handle, yellow pro-tective collar
with N-terminal
2 x 17 ... 28 (M40), 1 x 6 ... 13 (M20)
1 NO (1 x ON delayed - OFF leading), 1 NC
8146/5-V37-305-51-1110-K 18.500
stainless steel 1.4404
black hand-le, black pro-tective collar
-- 2 x 17 ... 28 (M40), 1 x 6 ... 13 (M20)
1 NO (1 x ON delayed - OFF leading), 1 NC
8150/5-V37-305-51-0010-K 8.360
stainless steel 1.4404
red handle, yellow pro-tective collar
-- 2 x 17 ... 28 (M40), 1 x 6 ... 13 (M20)
1 NO (1 x ON delayed - OFF leading), 1 NC
8150/5-V37-305-51-1010-K 8.360
40 A, 6-pole Polyester resin
black hand-le, black pro-tective collar
-- 4 x 17 ... 28 (M40), 1 x 6 ... 13 (M20)
-- 8146/5-V37-605-00-0010-K 10.960
Polyester resin
black hand-le, black pro-tective collar
-- 4 x 17 ... 28 (M40), 1 x 6 ... 13 (M20)
1 NO (1 x ON delayed - OFF leading), 1 NC
8146/5-V37-605-51-0010-K 10.960
Polyester resin
red handle, yellow pro-tective collar
-- 4 x 17 ... 28 (M40), 1 x 6 ... 13 (M20)
1 NO (1 x ON delayed - OFF leading), 1 NC
8146/5-V37-605-51-1010-K 10.960
Technical Data
Design Safety switch 40 AMechanical data
Degree of protection IP66 acc. to IEC/EN 60529Enclosure cover In ON position removable, in OFF position lockableHandle Can be locked with 3 padlocks in 0-position
Mounting / InstallationCable entries Standard: In polyamide, Series 8161
Special: In metalMain contacts
Electrical dataRated operational voltage 690 V ACRated insulation voltage 750 V Rated operational current 40 ASwitching capacity acc. to IEC/EN 60947-3; DIN VDE 0660, Part 107
1) 1 conducting path2) 2 conducting paths connected in series3) 3 conducting paths connected in series
AC-3Ue I P 240 V ~400 V ~440 V ~500 V ~690 V ~
40 A40 A40 A40 A40 A
11.0 kW22.0 kW22.0 kW22.0 kW37.0 kW
DC-23, DC-1Ue I220 V120 V60 V
40 A3)
40 A2)
40 A1)
Safety Switches 40 ASeries 8146/5-V37 8150/5-V37
Load Disconnect Switches and Motor Starters 2014-02-24·EK00·III·enE7/12
1) Engineering note:The maximum conductor cross-sections given were determined using the H07V. The minimum bending radius was assumed to be 4 x outer diameter in accordance with VDE 0298-3.2) only with heat-resistant cable > 70 °C on cable entries or/and > 85 °C on clamping pointsBold: specifications on the type plate
Service life of electrical / mechanical parts
> 105 operations
Max. short-circuit protection
80 A, triggering characteristics: gG acc. to IEC / EN 60291-1
Auxiliary contactsElectrical data
Rated operating voltage 500 V ACRated operational current 6 A
Load Disconnect Switches and Motor Starters 2014-02-24·EK00·III·enE7/14
Technical Data
Design Safety switch 63 / 80 AMechanical data
Degree of protection IP66 acc. to IEC/EN 60529Enclosure cover In ON position removable, in OFF position lockableHandle Can be locked with 3 padlocks in 0-position
Mounting / InstallationCable entries Standard: In polyamide, Series 8161
Special: In metalMain contacts
Electrical dataRated operational voltage 500 V AC (80 A) / 690 V AC (63 A)Rated insulation voltage 750 V Rated operational current 63 / 80 ASwitching capacity acc. to IEC/EN 60947-3; DIN VDE 0660, Part 107
1) 1 conducting path2) 2 conducting paths connected in series3) 3 conducting paths connected in series
Service life of electrical / mechanical parts
> 105 operations
Max. short-circuit protection
63 A: 125 A, triggering characteristics: gG acc. to IEC/EN 60291-180 A: 160 A, triggering characteristics: gG acc. to IEC/EN 60291-1
Auxiliary contactsElectrical data
Rated operating voltage 500 V ACRated operational current 6 A
Load Disconnect Switches and Motor Starters E7/152014-02-24·EK00·III·en
1) Engineering note:The maximum conductor cross-sections given were determined using the H07V. The minimum bending radius was assumed to be 4 x outer diameter in accordance with VDE 0298-3.2) only with heat-resistant cable > 70 °C on cable entries or/and > 85 °C on clamping pointsBold: specifications on the type plate
Load Disconnect Switches and Motor Starters 2014-02-24·EK00·III·enE7/18
Technical Data
Design Safety switch 125 / 160 / 180 AMechanical data
Degree of protection IP66 acc. to IEC/EN 60529Enclosure cover In ON position removable, in OFF position lockableHandle Can be locked with 3 padlocks in 0-position
Mounting / InstallationCable entries Standard: In polyamide, Series 8161
Special: In metalMain contacts
Electrical dataRated operational voltage 400 V AC (180 A) / 500 V AC (150 A) / 690 V AC (125 A)Rated insulation voltage 750 V Rated operational current 125 / 160 / 180 ASwitching capacity acc. to IEC/EN 60947-3; DIN VDE 0660, Part 107
1) 1 conducting path2) 2 conducting paths connected in series3) 3 conducting paths connected in series
Service life of electrical / mechanical parts
> 105 operations
Max. short-circuit protection
max. 200 A / 690 Vmax. 250 A / 500 V
Auxiliary contactsElectrical data
Rated operating voltage 500 V ACRated operational current 6 A
Load Disconnect Switches and Motor Starters E7/192014-02-24·EK00·III·en
1) Engineering note:The maximum conductor cross-sections given were determined using the H07V. The minimum bending radius was assumed to be 4 x outer diameter in accordance with VDE 0298-3.2) only with heat-resistant cable > 70 °C on cable entries or/and > 85 °C on clamping pointsBold: specifications on the type plate
We reserve the right to make alterations to the technical data, dimensions, weights, designs and products available without notice. The illustrations cannot be considered binding.
The switching function of the auxiliary contact depends on the installation slot used.1) left: delayed (ON), advanced (OFF); right: synchronising2) left and right: synchronising
Auxiliary contact key
14151E00
for removing the mounted auxiliary contact 201909 0.035