www.cls-led.com www.cls-led.com3 4
TECHNICAL
Toolsø 220 mm
PH1
INSTALLATION
Otis M: ø 170 - max. 210 mm
Otis LM - XL: ø 170 - max. 225 mm
Minimal Built-in height 20 cm To driver
2
3 4
1
Suspendedceiling
Before use, read this carefully> Always disconnect the power
before connecting the LEDfixturesotherwisethiswillcauseserious
damage!>Makesuretheunusedoutputshasbeenshortedwith
ashortcutconnectorbeforeconnectingthepower.>Beforeusepleasecheckthecorrectdipswitchsetting.
(See sticker on the driver)>Thedrivermustbesetto1050mA. Shortcut
connector
LED �xture
SpecificationsLED: 1 x CitizenAvailablecolours:
CRI>80:2700K,3000K&4000K
CRI>90:2500K,2700K,3000K&4000K
CRI>95:2700K,3000K&4000KBeamangle: 15º,30ºor50ºPowersupply:
Max.1050mAPowerconsumption: Otis: max.37Watt OtisXL:
max.55WattHousing: PC/aluminiumWeight: 1400grIPvalue:
IP20Ambienttemperature: -10ºCtill+40ºC
ø 170 - 210 mm
164 mm
ø 220 mm Cut-out sizeOtis M
ø 170-225 mm
164 mm
ø 235 mm
Otis LM - XLCut-out size
2021CLS-LEDBV.Allrightsreserved.Informationsubjecttochangewithoutnotice,CLS-LEDBVandallaffiliatedcompaniesdisclaimliabilityforinjury,damagedirectorindirectloss,consequentialoreconomic
loss or any other loss occasioned by the
useof,inabilitytouseorrelianceontheinformationcontainedinthismanual.Nopartofthismanualmaybereproduced,inanyformorbyanymeans,withoutpermissioninwritingfromCLS-LEDBV.OtherlegalinformationcanbefoundinourGeneralconditions,foundonthebackofyourCLS-LEDBVinvoice,insidetheCLScatalogueoronourwebsitewww.cls-led.com/General-Terms.pdf
www.cls-led.com www.cls-led.com65
WIRING DIAGRAM NON DIM DRIVER
CLS ND 008
* 150 cm cable
Installation wire 2 x 0.5 mm2
Driver till last Otis total cable length is max. 10 m
120 ~180 cm cable120 ~ 180 cm cable
129,5 mm
42 mm
CLS Otis# O-7XX-X-XXXX-X
Max. 1 Otis �xture on the CLS ND 008
CLS ND 008, non dimmable, 500-1050mA driver30 x 129,5 x 42 mm
(hxwxd)
* 150 cm cable
Installation wire 2 x 0.5 mm2
Driver till last Otis total cable length is max. 10 m
120 ~ 180 cm cableCLS ND 012
129 mm
76 mm
Max. 1 Otis �xtures on the CLS ND 012
CLS ND 012, non dimmable, 350-1050mA driver30 x 129 x 76 mm
(hxwxd)
CLS Otis# O-7XX-X-XXXX-X
Always switch off mains power of the driver before connecting
any fixtures!
MIRROR ASSEMBLY
1
2 2
3 3
1
Example I Example II
www.cls-led.com www.cls-led.com7 8
LIST OF SYMBOLS
Multiple connectionDaisychain connectivity
Installation depthIn centimeters
SwivelFixture is horizontally rotatable, indicated in
degrees
SwivelFixture is vertically rotatable,indicated in degrees
Installation sizeIn centimeters
Application areaIndoor or outdoor
Application areaFloor, wall or ceiling
Protection classOne, two or three
Cable lengthMaximum cable attachedto the fixture in
centimeters
LifespanOf the light source in hours
DriverInclusive or exclusiveInternal or external
PressureMaximum pressure on the fixture in kg/cm2
WeightIn grams/kilograms
CurveMinimal bending curvein centimeters
LED pitchPitch between the LEDs in millimeters
Power supplyIn VDC, VAC or milliAmpere
Power consumptionIn VA or Watt
IP valueIngress Protection classifies the degrees of protection
provided against the intrusion of the product
Cutting lengthIndicated by the cutting marks
LEDsKind of LED used in the fixture
LensesAvailble lenses,indicated in degrees
Performance ZoomAdjustable beam angle
Plug & playEasy connection using the SmartConnect system
White colour temperatureIn di�erent Kelvin values;Cold white,
neutral white, warm white or extra warm white
ColourAvailable colours;Amber, blue, red or green
Colour changingRGB, RGB-W, RGB-A, AWB or Tunable White
DMX inputFixture works on DMX512 protocol or Wireless DMX
Magno dimmingAccurate dimming from100 - 1% by using a magnet
Dynamic ControlDynamic Power Control orDynamic Temperature
Control
Combined productCompose your own fixture
Warranty3 or 5 years warranty onthe product
Energy label
Conformité EuropéenneCE marking for free marketabilityof
industrial goods within the EU
r
h
ø wd
Dimmable1-10 Volt, Phase, individual,DMX dimmable or DALI
DRIVERINCLUDED
DRIVEREXTERNAL
Retail & Food LED modulesClothing, furniture, kitchens,
jewellery, shoes, bread, meat, fish andvegetables & fruit.
LightsourceEquipped with a CLS, Citizen or a Xicato LED
module
Bluetooth controlledBy Casambi
PWM dimmingTraditional PWM dimming, DMX analogor DMX Hybrid
dim
CLSDYNAMICCOLOUR
COB
WIRING DIAGRAM LDC-41 GIII DIMMER
Installation wire 2 x 0.5 mm2
Driver till last Otis total cable length is max. 10 m
48 VDC
CLS LDC-41 GIII DMX LED dimmer 4 channels# 113001
CLS LDC adaptercable LDC to SmartConnect System# 911367
Connector with the yellow, black and white cable
Connector with thered, green and blue cable
25 mm (w)
Make sure the LDC-41 GIII is set to 1000mA!
Channel 2
Channel 3
Channel 1
* 150 cm cable
CLS Otis# O-XXX-X-XXXX-X
OTIS48 VDC powersupply: Max. 2 pieces of Otis on each
channel!
BT75.48 Max. 2 pieces of Otis on the LDC-41 GIIBT120.48 Max. 3
pieces of Otis on the LDC-41 GIIBT240.48 Max. 6 pieces of Otis on
the LDC-41 GII
OTIS XL48 VDC powersupply: Max. 1 piece of Otis XL on each
channel!
BT75.48 Max. 1 pieces of Otis XL on the LDC-41 GIIBT120.48 Max.
2 pieces of Otis XL on the LDC-41 GIIBT240.48 Max. 3 pieces of Otis
XL on the LDC-41 GII
ACCESSORIES113000 CLS LDC-41 DMX LED dimmer 4 channels 0.35-1A
per channel 87129900 CLS SmartConnect 2-fold junction box &
shortcircuit connect. 87129905 CLS SmartConnect, 6-fold junctionbox
& shortcircuit connect. 87129915 CLS SmartConnect short circuit
plugs (10pcs) 87129959 CLS SmartConnect extensioncable betw. 2
junctionboxes 5mtr 874008 CLS ND 008 non dim, 198 - 264 V,
500-1050mA driver874012 CLS ND 012 non dim, 198 - 264 V, 350-1050mA
driver911367 CLS LDC adaptercable LDC to SmartConnect system707018
CLS BT75.48 LED power supply 48VDC, 75VA, 85-265 VAC707019 CLS
BT120.48 LED power supply 48VDC, 120VA, 85-265 VAC707020 CLS
BT240.48 LED power supply 48VDC, 240VA, 85-265 VAC