Safety in Motion Industrial Slip Control. First Aid is too late! You must act to prevent accidents before they happen.

Safety in MotionIndustrial Slip Control

First Aid is too late! You must act

to prevent accidents before they happen.

First Aid is too late! You must act

to prevent accidents before they happen.

First Aid is too late! You must act

to prevent accidents before they happen.

First Aid is too late! You must act

to prevent accidents before they happen.

First Aid is too late! You must act

to prevent accidents before they happen.

Vigil Antislip is your most cost-effective insurance against the deaths,

injuries and trauma that accompany workplace accidents attributed to

slips, trips and falls.

By installing Vigil Antislip you will:

Reduce accidents and the personal trauma they cause

Reduce time lost due to accident and injury

Reduce the potential for legal action based on unsafe

work areas

Reduce your compensation and insurance costs

Provide the strongest possible evidence of your

commitment to employee safety

Create a more productive, harmonious working environment

VIGIL ANTISLIP STAIR NOSINGS

VIGIL ANTISLIP STAIR NOSINGS

Guaranteed not to crack, delaminate or wear smooth.

Impervious to any fluid spillage or weather conditions.

VIGIL ANTISLIP STAIR NOSINGS

Suitable for all marine, transport, mining and commercial businesses.

VIGIL ANTISLIP LADDER RUNG COVERS

VIGIL ANTISLIP LADDER RUNG COVERS

Increase the area of foot contact, enhance friction co-efficient.Greatly enhance the lifespan of any ladder.

VIGIL ANTISLIP LADDER RUNG COVERS

Suitable for all off-shore and on-shore applications.

VIGIL ANTISLIP METAL DECK

VIGIL ANTISLIP METAL DECK

Metal Deck can be applied to any flat or level surface, for interior or exterior use.

VIGIL ANTISLIP METAL DECKMetal Deck is impervious to fluid spills and other contaminants.

Enhanced visibility assists in accident avoidance.

VIGIL ANTISLIP DECK MARK

Specially created messages and internationally recognised symbols can be added to Vigil Metal Deck and Vinyl Deck to provide an added level of safety.

VIGIL ANTISLIP DECK LIGHT

The ultimate evacuation system, designed to provide fleeing workers with a luminous, non-slip pathway.

Available in all sizes, configurations and grades available for Stair Nosings, Ladder Rung Covers and Metal Deck.

The luminous resin does not affect non-slip properties in any way.

VIGIL ANTISLIP VINYL DECKA vital addition to areas of heavy spillage or soilage, or where traffic flows need to be controlled.

VIGIL ANTISLIP BOARDWALK Specifically formulated for flooring areas where an increased level of structural integrity is required to create a high performance non-slip arena. Impervious to spills and extremes of heat and cold.

VIGIL ANTISLIP COMMERCIALCommercial grade stair nosings and other products combine safety and durability with aesthetic appeal. Suitable for all kinds of commercial and business applications.

VIGIL ANTISLIP SAFETY TRACKSafety Track is the smart solution to domestic and barefoot surfaces such as baths, boats and stairs. Easy to apply to almost any clean, dry and oil-free surface, available in two grit grades.

VIGIL ANTISLIP - MADE TO LASTAll Vigil Antislip products share a manufacturing process that puts it in a class of its own in the slip-control arena. Every step of the process is quality controlled, and only the highest quality raw materials are used.

STEEL FOUNDATION

In splash zones and acidic areas, 1.2mm Grade 316

(Marine grade) Stainless Steel is used as the substrate.

In all other areas, 1.2mm AZ150 Colorbond Steel is used.

The 1.2mm gauge has been selected as it avoids the

flexing that can cause the antislip material to

delaminate.

The 1.2mm gauge also requires less fixing points than

thinner gauges, and provides sufficient impact

resistance.

FABRIC MEDIUM

The use of a ‘floating’ fabric medium eliminates the

delamination problems caused by applying resin

directly to the substrate.

High resistance to impact and thermal expansion

differentials is achieved.

A ‘key coat’ of resin is first applied, making the fabric

an integral part of the resin system.

This increases the tensile strength whilst providing

allowance for differences in thermal expansion rates.

RESIN SYSTEM

All layers hand laminated, not

sprayed.

Hand rolled to ensure no air

bubbles or pinprick holes.

Cured at optimum temperature

and humidity in a controlled

environment.

Resistant to all solvents,

petroleum products and acid

solutions.

AGGREGATE

Silicone Carbide (SiC) with Mohs hardness rating of

9.2 - 9.5 used.

Non-wearing crystalline structure of SiC ensures

extreme durability.

Prior to final coat of resin, all aggregate is removed

from edges and edges sealed.

This prevents chipping during transportation or

installation, which can leave bare steel edges.

VIGIL ANTISLIP

10 YEAR WARRANTY All Vigil Antislip processes are Quality Assured.

Vigil Antislip offers a 10 year warranty for metal back

premium gold products against:

- Delamination

- Chemical attack

- Wear and corrosion

under normal usage conditions.

Warranty provides for replacement of products

succumbing to the above.

PROTECTION FOR EVERY INDUSTRY