Icynene Inc. 6747 Campobello Rd. Mississauga, Ontario LN 2L7, Canada, , Telephone: LDC50V6 - Classic Max ™ Page 1 of 12 SDS Preparation Date (mm/dd/yyyy): 09/04/2015 SAFETY DATA SHEET SECTION 1. IDENTIFICATION Product identifier used on the label LDC50V6 - Classic Max ™ : Product Code(s) : Professional Use Only Recommended restrictions: None known. : Recommended use of the chemical and restrictions on use Chemical family : Mixture Name, address, and telephone number of the manufacturer: Name, address, and telephone number of the supplier: Icynene Inc. Refer to manufacturer 6747 Campobello Rd. Mississauga, Ontario LN 2L7, Canada, (800) 758-7325 : Manufacturer's Telephone # 24 Hr. Emergency Tel # : (613) 996-6666 SECTION 2. HAZARDS IDENTIFICATION Classification of the chemical Most important hazards: This material is classified as hazardous under U.S. OSHA regulations (29CFR 1910.1200) (Hazcom 2012) and Canadian WHMIS regulations (Hazardous Products Regulations) (WHMIS 2015). Hazard classification: Acute toxicity, oral - Category 4 Acute Toxicity, dermal - Category 4 Acute Toxiciy, inhalation - Category 4 (vapor) Skin Corrosion/Irritation - Category 1 Eye Damage/Irritation - Category 1 Reproductive Toxicity - Category 2 Specific target organ toxicity, single exposure - Category 2 (kidney) Specific target organ toxicity, single exposure - Category 3 (respiratory, CNS) Label elements Hazard pictogram(s) Danger Signal Word Harmful if swallowed, in contact with skin or if inhaled. Causes severe skin burns and eye damage. Suspected of damaging fertility or the unborn child. May cause damage to organs. May cause drowsiness or dizziness. May cause respiratory irritation. Hazard statement(s) Precautionary statement(s)
13
Embed
SAFETY DATA SHEET - Icynene Inc content uploads... · Mississauga, Ontario LN 2L7, ... (613) 996-6666 SECTION 2. HAZARDS IDENTIFICATION ... SAFETY DATA SHEET Routes of entry inhalation:
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Icynene Inc.
6747 Campobello Rd.
Mississauga, Ontario LN 2L7, Canada,
,
Telephone:
LDC50V6 - Classic Max ™
Page 1 of 12SDS Preparation Date (mm/dd/yyyy): 09/04/2015
SAFETY DATA SHEET
SECTION 1. IDENTIFICATION
Product identifier used on the label
LDC50V6 - Classic Max ™:
Product Code(s) :
Professional Use Only
Recommended restrictions: None known.:
Recommended use of the chemical and restrictions on use
Chemical family : Mixture
Name, address, and telephone number of
the manufacturer:
Name, address, and telephone number of
the supplier:
Icynene Inc. Refer to manufacturer
6747 Campobello Rd.
Mississauga, Ontario LN 2L7, Canada,
(800) 758-7325:Manufacturer's Telephone #
24 Hr. Emergency Tel # : (613) 996-6666
SECTION 2. HAZARDS IDENTIFICATION
Classification of the chemical
Most important hazards: This material is classified as hazardous under U.S. OSHA regulations (29CFR 1910.1200)
(Hazcom 2012) and Canadian WHMIS regulations (Hazardous Products Regulations) (WHMIS 2015).
Hazard classification:
Acute toxicity, oral - Category 4
Acute Toxicity, dermal - Category 4
Acute Toxiciy, inhalation - Category 4 (vapor)
Skin Corrosion/Irritation - Category 1
Eye Damage/Irritation - Category 1
Reproductive Toxicity - Category 2
Specific target organ toxicity, single exposure - Category 2 (kidney)
Specific target organ toxicity, single exposure - Category 3 (respiratory, CNS)
Label elements
Hazard pictogram(s)
Danger
Signal Word
Harmful if swallowed, in contact with skin or if inhaled.
Causes severe skin burns and eye damage.
Suspected of damaging fertility or the unborn child.
May cause damage to organs.
May cause drowsiness or dizziness.
May cause respiratory irritation.
Hazard statement(s)
Precautionary statement(s)
Icynene Inc.
6747 Campobello Rd.
Mississauga, Ontario LN 2L7, Canada,
,
Telephone:
LDC50V6 - Classic Max ™
Page 2 of 12SDS Preparation Date (mm/dd/yyyy): 09/04/2015
SAFETY DATA SHEET
Obtain special instructions before use.
Do not handle until all safety precautions have been read and understood.
Avoid breathing dust/fume/gas/mist/vapours/spray.
Use only outdoors or in a well-ventilated area.
Wash thoroughly after handling.
Do not eat, drink or smoke when using this product.
Wear protective gloves/clothing and eye/face protection.
If exposed or concerned: Get medical attention/advice.
If swallowed: Rinse mouth. Do NOT induce vomiting.
IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
If skin irritation occurs, get medical advice/attention.
Specific treatment (see this label).
Take off contaminated clothing and wash it before reuse.
IF INHALED: Remove person to fresh air and keep comfortable for breathing.
Immediately call a POISON CENTER or doctor/physician.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do.
Continue rinsing.
Immediately call a poison center/doctor.
Store locked up. Store in a well-ventilated place. Keep container tightly closed.
Dispose of contents/container in accordance with local regulation.
Other hazards
Other hazards which do not result in classification:
None known.
SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS
Mixture
CAS # Chemical name ConcentrationCommon name and synonyms
1244733-77-42,2,4-Trimethyl-1,3-pentanediolmono(
2-methylpropanoate)
40.0 - 50.0Phosphoric trichloride, reaction
products
with propylene oxide
6711-48-41,3-Propanediamine, N'-[3-
(dimethylamino)propyl]-N,N-dimethyl-
1.0 - 10.0Bis(3-dimethylaminopropyl)ami
ne
1704-62-7Dimethylaminoethoxyethanol 1.0 - 3.02-
(2-Dimethylaminoethoxy)ethano
l
3855-32-11,3-Propanediamine, N-[3-
(dimethylamino)propyl]
-N,N',N'-trimethyl-
1.0 - 3.0N-[3-(dimethylamino)propyl]
-N,N',N'-trimethylpropane-1,3-di
amine
The exact concentrations of the above listed chemicals are being withheld as a trade secret.
SECTION 4. FIRST-AID MEASURES
Description of first aid measures
Do NOT induce vomiting. Never give anything by mouth to an unconscious
person.Get medical attention if symptoms persist.:Ingestion
If inhaled: Remove person to fresh air and keep comfortable for breathing.If breathing
has stopped, give artificial respiration. If breathing is difficult, give oxygen by qualified
medical personnel only. Call a POISON CENTRE or doctor/physician if you feel
unwell.
:Inhalation
If on skin: Wash with plenty of soap and water.If skin irritation occurs, get medical
advice/attention. Take off contaminated clothing and wash before re-use.
Skin contact :
Icynene Inc.
6747 Campobello Rd.
Mississauga, Ontario LN 2L7, Canada,
,
Telephone:
LDC50V6 - Classic Max ™
Page 3 of 12SDS Preparation Date (mm/dd/yyyy): 09/04/2015
SAFETY DATA SHEET
For eye contact, flush with running water for at least 15 minutes.If eye irritation
persists: get medical advice/attention.
Eye contact :
Most important symptoms and effects, both acute and delayed
Causes skin burns. Contact may cause redness, swelling and a painful sensation.
Can cause irritation, redness, tearing, and blurred vision and/or eye damage. Ingestion
may cause gastrointestinal irritation, nausea, vomiting and diarrhea. Symptoms may
include redness, itching and swelling. .
:
Indication of any immediate medical attention and special treatment needed
Icynene spray foam insulation products have an excellent health and safety record spanning more than 350,000 projects over more than 25 years. Nonetheless, safe handling practices during and immediately following installation are required to eliminate the possibility of health effects from exposure to isocyanates. Asthma, other lung problems, and irritation of the nose and throat can result from inhalation of isocyanates. Direct contact with the skin and eyes can result in irritation. Different individuals will react differently to the same exposures; some will be more sensitive than others. Severe asthma attacks have been reported in some sensitized workers exposed repeatedly to isocyanates while not wearing proper protective equipment. Some reports indicate a reaction and sensitization can occur following a single, sustained occupational exposure to isocyanates without proper protective equipment above the OSHA permissible exposure limit. But sensitization might not occur immediately in some individuals. Consistent use of personal proper protective equipment to prevent exposure during spraying and within the 1 hour**-period after spraying is completed is critical to eliminating the health hazard. Once sensitization has occurred, a worker might not be able work safely with spray foam insulation again.
Sprayers, sprayer helpers, and anyone else present during spraying or within 1 hour** after spraying is complete: You must ventilate at 40ACH and must wear proper Personal Protective Equipment (PPE) at all times during spray, including full-body-coverage, chemical-protective clothing and a NIOSH-certified respirator with fresh air supply. While spraying and for 1 hour** after spraying is completed, no one must be allowed within 50 feet of the sprayed foam without wearing this type of PPE at all times. Adequate active, negative pressure ventilation (exhaust fans) of the job site must be in place during spray and for 2 hours** after spray is complete to allow for re-occupancy.
For installations of low VOC products Icynene Classic Max and Icynene ProSeal in the United States only, re-entry of the job site is permitted after 1 hour** and re-occupancy of the job site is permitted after 2 hours** provided that ventilation rates are followed as recommended on this page.
Independent studies and third party toxicologist verification indicates that when the prescribed ventilation rates and periods are followed, Icynene spray foam insulation is safely cured.
Health & SafetyCertified Sprayer
The Evolution of Insulation™
Icynene Inc. 6747 Campobello RoadMississauga, Ontario L5N 2L7 Canada
Ph: 1.800.758.7325 • ICYNENE.COM
SL-511 • Updated August 2015
WARNINGWEAR PROPER
PERSONAL PROTECTIVE EQUIPMENT AT ALL
TIMES ON PREMISES DURING SPRAYING
AND WITHIN 24 HOURS AFTER SPRAY IS
COMPLETE
WEAR PROPER PERSONAL PROTECTIVE
EQUIPMENT AT ALL TIMES ON PREMISES
DURING SPRAYING & FOR AT LEAST 1 HOUR* AFTER SPRAYING IS COMPLETE.
*FOR APPLICATIONS OF LOW VOC
ICYNENE CLASSIC MAX AND ICYNENE PROSEAL ONLY WITH MIN.
40ACH VENTILATION.
LowVOC
RE-ENTRY AND RE-OCCUPANCY PERIODSTimes based upon ventilating during and after a spray application.
Ventilation Rate (Air Changes
per Hour)
Re-entry period for sprayers, helpers,
informed trade workers and contractors
Re-occupancy period for all
others
At 0.3 ACH 24 hours 24 hours
At 1.0 ACH 12 hours* 24 hours
At 10.0 ACH 4 hours* 24 hours
At 40.0 ACH 1 hour** 2 hours**
* Twelve (12) and four (4) hour re-entry for trades applies to all Icynene products sold in the United States.
** One (1) hour re-entry and two (2) hour re-occupancy applies only to Low VOC products (Icynene Classic Max and Icynene ProSeal).