SAFETY COURSES - izululethu.co.za Course Registrations.pdf · Advance SAMTRAC Modules /topics (outline only) The SHEQ management system. Applied operational process mapping for the

SAFETY COURSES

Course /event title (to appear on the accreditation certificate)

Incident Investigation (Level 2)

Modules /topics (outline only) Principles of the act,

Definitions and an understanding of the specific requirements pertaining to continuous hazard identification and risk assessment.

Duration 1 Day NQF level and Unit Standard (US) number if registered or aligned with SAQA

Unit Standard: 120335 NQF Level: 03


Hazard Identification and Risk Assessment (H.I.R.A) (Level 3)

Modules /topics (outline only) Safety

Workplace inspections Principles of the act.




Occupational Health and Safety Act (OHSA)

Modules /topics (outline only) Legal knowledge and duties Responsibilities of the Safety Officer Incident and accident prevention Philosophy of accidents Management systems Hazard identification analysis and risk assessment.




General Health and Safety

Modules /topics (outline only) Legal knowledge Legislation Personal health and safety equipment Reporting of incidents Notices and signs Emergency procedures




LAWREG

Modules /topics (outline only) O.H.S Act in terms of its development principle and rights General Administrative Regulations Incident Reporting and Documentation General Safety Regulations Environmental Regulations General Machinery Regulations Electrical Machinery and Installations Driven Machinery Regulations

Facilities Regulations Vessels Under Pressure Regulations Hazardous Chemical Regulations

Duration 1 Week NQF level and Unit Standard (US) number if registered or aligned with SAQA



Legal Liability

Modules /topics (outline only) Common Law and Legislation Criminal Liability Principles of the O.H.S Act, 1993




Stacking & Storage Regulations

Modules /topics (outline only) Stacking and Warehouse Requirements Pallet Construction and Loading Stacking and Storage of Freight Supporting Clauses Stacking and Storage Standard General Safety Regulation




Confined Spaces

Modules /topics (outline only) defining a confined space confined space hazards Permit-Required Confined Space understanding why work in such a space maintain air quality and prevent fire explosions




Supervisory Safety

Modules /topics (outline only) safe systems at work hazard identification and risk assessment duties of a supervisor and intervention skills understanding of Health, Safety Welfare and Environmental issues legal requirements




Hand Tools

Modules /topics (outline only) Tool safety Carrying & Using hand tools Cutting & Scraping tools Hand tool care, Maintenance & storage

Fastening Tools Select and use appropriate hand tools and equipment




Scaffolding Erector

Modules /topics (outline only) Design Compliance and Roles Responsibilities of both scaffolding inspectors and erectors




Scaffolding Inspector

Modules /topics (outline only) Design Compliance and Roles Responsibilities of both scaffolding inspectors and erectors


Unit Standard: 263205 NQF Level:04


Basic Fire Fighting (Fire Marshal)

Modules /topics (outline only) Role of a fire marshal Liaison with the fire service Action to be taken upon discovery of a fire Aspects such as the chemistry of a fire. Implementing fire drills Evacuations Correct use of a fire extinguisher




Basic Fire Fighting (Level 2)

Modules /topics (outline only) triangle of combustion tetrahedron of combustion means of spreading identification and use of water supplies properties of water and fire hydrants




Dangerous Goods Handling

Modules /topics (outline only) Legislation to health risks How to properly handle dangerous goods




Perform Basic Rigging Procedures

Modules /topics (outline only) steel wire slings chain slings polyester slings shackles eye bolts




Advance SAMTRAC

Modules /topics (outline only) The SHEQ management system. Applied operational process mapping for the SHEQ management system. Improving the effectiveness and efficiency of the SHEQ management system. Implementing the SHEQ management system as an operational plan. HSE ethics in the SHEQ management system. Workplace risk assessment and control in an effective SHEQ management system. Individual assignment – Design a SHEQ management system for your company.




ROOT CAUSE ANALYSIS TRAINING

Modules /topics (outline only) Understand complex problems Finding & Evidence Review Models to help understanding findings / problems Recommended Root Causes Classification Table Finding Root Causes Failure Mode & Effects Analysis (FMEA) Developing & Implementing (CAR & CAP) Tracking a Corrective Action Validating a Corrective Action




SAMTRAC CONSTRUCTION

Modules /topics (outline only) The foundations of CHS management. Health and safety management plans for construction projects. The role of CHS in tender submissions and cost estimations. Establishing the fundamentals of construction health and safety organisation. Establishing effective health and safety consultation, co-operation and promotion. Sub-contractor health and safety compliance risk. Employee wellness in the construction work environment. Hazard identification and risk assessment programmes and controls. Site or camp-establishment risk.

Duration 2 Weeks NQF level and Unit Standard (US) Unit Standard: 9964

number if registered or aligned with SAQA

NQF Level: 02


Safety Officer 2

Modules /topics (outline only) MHSA (Mine Health & Safety Act) Legislation The Auditing Process Safety in Welding Due Diligence Critical Task Inventory Critical Task Analysis Behaviour Based Safety Hazardous Chemical Substances Mobile Machinery Hazards & Control Meetings Explosive Safety Programme Evaluations Occupational Health and Hygiene Emergency Preparedness Ventilation Communications

Duration 2 Weeks NQF level and Unit Standard (US) number if registered or aligned with SAQA



Safety Officer 3

Modules /topics (outline only) Health and Safety Features Premises and Housekeeping Portable Power Tools Symbolic Safety Signs Confined Spaces Lifting Equipment Pressure Vessels Electrical Safety Ladder Safety Labeling Lockout Systems OSHACT Fire Prevention II Vibration SHE System Scaffolds Safe Guarding Thermal Stress Ventilation II Gas Cylinders Managing PPE

Duration NQF level and Unit Standard (US) number if registered or aligned with SAQA



OSHAS 18001

Modules /topics (outline only) 18001 Specifications Occupational Health and Safety Management Systems Declaration of conformances OSHAS 18002 Guidelines Occupational Health and Safety Policies Health and Safety Acts

Audit Protocols Corporate Governance Requirements Risk Assessment Process Management Programs Implementation and Operation Operation Control Document Management Training, Awareness and Competence Corrective Action Management Review Accidents, Incidents, Non-Conformances Emergency Preparedness and Response Audits

Duration 2 Days NQF level and Unit Standard (US) number if registered or aligned with SAQA



Auditors

Modules /topics (outline only) Auditing Techniques Course Objectives Causes and Consequences of Incidents Managing Risk Exposures Measuring and Monitoring Risk Control Introduction to Environmental Management Introduction to Quality Management Preparing for the Audit Auditor Demeanour and Skills Interviewing Techniques Closing Meetings Post Audit Activities




Strata Control

Modules /topics (outline only) Basic Rock Engineering Definitions Stress Fractures in mining Blast Fractures Development Support Installation Stope Support Legislative Requirements Treatment of Joints Treatment of Faults Treatment of Dykes Treatment of Bad Hanging Effects of Stress in Mining Creating Safer Conditions




ICAM (Incident Cause Analysis Method)

Modules /topics (outline only) Legislative Requirements Terminology The ICAM System Effective Implementation of ICAM System

Identifying Causes Taking Preventative/ Remedial Actions Completing ICAM Documents




Legal Responsibility

Modules /topics (outline only) Health and Safety Act Understanding and Interpreting the MHSA MHSA Sect 2,5,10,11,22,23 Requirements Legal appointments – MHSA and Min Act Regulations Understanding Due diligence Duties and Responsibility Hazard Identification Basic Risk Management




Safety For Supervisors

Modules /topics (outline only) Health and Safety Act Understanding and Interpreting the MHSA MHSA Sect 2,5,10,11,22,23 Requirements Legal appointments – MHSA and Min Act Regulations Accident and incident investigation techniques MHSA sect 11.5 Requirements MHSA Reg. Chapter 23 Requirements Enquiries Mine specific forms Effective Task Observation Methods and techniques Coaching and training methods Evaluation of Skills Training Mine specific forms Effective Planned inspection skills- Methods and techniques Mine specific forms Effective Hazard identification- Methods and techniques Identification skills Effective Risk Assessment Risk Analysis Risk Ranking Control Techniques Remedial action implementation and follow up Risk matrix (Mine specific MHSA Sect 11 Requirements Report Writing Effective report writing and report distribution Risk Analysis Risk Ranking Control Techniques




SHE Practitioner

Modules /topics (outline only) Monitor, report and make recommendations pertaining to specified requirements in terms of working at heights Demonstrate knowledge pertaining to the preparation, conducting, recording and follow-up actions of a planned task observation in a working place Verify compliance to safety, health and environmental requirements in the workplace Monitor and make recommendations on the application of health and safety principles regarding hazardous substances in the working place Participate in the establishment, implementation and monitoring of a health and safety agreement Apply knowledge of statistics and probability to critically interrogate and effectively communicate findings on life related problems Participate in the implementation and evaluation of a safety and health management programme in the workplace Take action to address impacts on the environment Apply environmental management tools to assess impacts Conduct an investigation into workplace safety, health and environmental incidents


Unit Standard: 49256 NQF Level 04


COID Act Overview (Workmen’s Compensation)

Modules /topics (outline only) The purpose of the Compensation for Occupational Injuries and Diseases Act The Responsibilities of an Employer The Responsibilities of an Employee The Responsibilities of Mandators and Contractors How to Define an Occupational Injury or Disease Payments of Assessments to Accident How and when to report an Accident or Disease Processing the First, Progress & Final Medical reports Processing Resumption and other reports




Construction Health & Safety File

Modules /topics (outline only) Documented plan Risk assessment templates with examples Written safe work practices template with examples Templates for all safety registers required by contractors Fall protection plan Safety file layout Templates for all legal appointment letters required by the Regulations




Flagman Training

Modules /topics (outline only) Identify risks to health and safety at roadwork’s Prepare for a site for road works Select the correct PPE for flag person operations

Select and display the correct temporary signage Demonstrate the correct flagging signals to control traffic Using vehicles to convey employees / equipment to and from work Code of conduct for flag persons




Emergency Planning

Modules /topics (outline only) Emergency Management Considerations Direction and control The emergency coordinator The emergency operations Centre (EOC) Emergency equipment First aid First aid facilities The first aid department The first aid room First aid kits Issuing of medication Emergency first aid equipment First aid personnel First aid training Organization and records Types of emergencies Fire and explosion Planning considerations General requirements for workplaces Training of key personnel Protective equipment Fire team organization Other emergency teams Training of fire teams Fire drills and emergency evacuations Emergency exit routes Fire alarm procedures Informing the fire brigade Evacuation plan Fire drill training




Ladder Safety

Modules /topics (outline only) General Safety Regulations [Section 13A – Ladders) Purchasing of ladders Non-slip bases and safety tops Inspection and maintenance Use of ladders Ascending and descending ladders Other safe practices Electrical hazards and metal hazards Examples of unsafe practices involving ladders Ladder inspection checklist




Workplace Trainer

Modules /topics (outline only) Organizational Development Education and Training in context The HRD Process Competency Based Training The Role of the Trainer Training Needs Analysis Designing, Preparing and Delivering Training Evaluation of Training Training Management Skills Practice




Manual Handling

Modules /topics (outline only) Identifying causes of accidents Developing preventative measures Work skills and tasks analysis to identify and rectify improper techniques Understanding the anatomy of the spine and how it functions Understanding the mechanisms of back pain



MACHINERY COURSE


Bull Dozer

Modules /topics (outline only) Introduction to the Machine Load Charts General, Safety Procedures Battery Care Faulty Finding Daily inspection checklist Bucket Level Techniques Hazardous Labels Principles of Balance


Unit Standard: 262729 NQF Level: 02 Credits: 15


Drill Rig

Modules /topics (outline only) Introduction to the Machine Trouble Shooting General, Safety Procedures Preparation For Operation Operator’s Compartment Parking Procedure Pre-Start Inspection Checklist Park Brake Test Drilling Compartment Drilling Procedure

Duration 5 Days NQF level and Unit Standard (US) number if registered or aligned with


SAQA Credits: 15


Articulated Dump Truck

Modules /topics (outline only) Introduction to the Machine Park Brake Testing General, Safety Procedures Parking Procedure Trouble Shooting Dumping Procedure Pre-Start Inspection Checklist Preparation For Operation Operator’s Compartment Principles of Balance




Excavator

Modules /topics (outline only) Introduction to the Machine Trouble Shooting General, Safety Procedures Park Brake Test Operator’s Compartment Parking Procedure Pre-Start Inspection Checklist Preparation for Operation Loading Procedure Excavating Procedure




Counterbalanced Lift Truck (F1A, F2A, F3A, F4A)

Modules /topics (outline only) Introduction to the Machine Load Charts General, Safety Procedures Battery Care Faulty Finding Stacking Rules Daily Inspection Checklist Fork Level Techniques Hazardous Labels Principles of Balance




Front End Loader

Modules /topics (outline only) Introduction to the Machine Trouble Shooting General, Safety Procedures Park Brake Test Preparation For Operation Parking Procedure Pre-Start Inspection Checklist Bucket Level Techniques

Operator’s Compartment Loading Procedure




Grader

Modules /topics (outline only) Introduction to the Machine Trouble Shooting General, Safety Procedures Brake Testing Procedure Preparation for Operation Grading Procedure Daily Inspection Checklist Blade Level Techniques Operators Compartment Parking Procedure




Load Haul Dumper

Modules /topics (outline only) Introduction to the Machine Trouble Shooting General, Safety Procedures Preparation For Operation Operator’s Compartment Parking Procedure Daily inspection checklist Park Brake Test Dumping Compartment Load & Dumping Procedure




Mobile Crane

Modules /topics (outline only) Introduction to the Machine Trouble Shooting General, Safety Procedures Preparation For Operation Operator’s Compartment Park Brake Test Pre-Start Inspection Checklist Parking Procedure Lifting Procedure Lifting Compartment




Overhead Crane

Modules /topics (outline only) Introduction to the Machine Load Charts General, Safety Procedures

Battery Care Faulty Finding Stacking Rules Daily inspection checklist Boom Level Techniques Hand Signals Principles of Balance




Rock Drill Operator

Modules /topics (outline only) Introduction to the Machine Preparation For Operation General, Safety Procedures Attaching The Pusher Leg Fitting And Assembling Parts Of The Drilling Machine Drilling Procedure Controls Operating Thrust/Pusher Leg First Time Operation




Roller Compactor

Modules /topics (outline only) Introduction To The Machine Trouble Shooting General, Safety Procedures Park Brake Test Preparation For Operation Parking Procedure Pre-Inspection Checklist Roller Level Techniques Operators Compartment Compacting Procedure




Telescopic Boom Handler

Modules /topics (outline only) Introduction to the Machine Park Brake Test General, Safety Procedures Battery Care Faulty Finding Stacking Rules Daily inspection Checklist Boom Level Techniques Hazardous Labels Principles of Balance




Tractor Loader Backhoe

Modules /topics (outline only) Introduction to the Machine Trouble Shooting General, Safety Procedures Park Brake Test Preparation for Operation Excavating Compartment Daily inspection checklist Bucket Level Techniques Operators Compartment Loading Compartment




Tower Crane

Modules /topics (outline only) Introduction to the Machine Changing Speed Ranges Layout of Controls Brakes And Hand Signals Servicing And Ordering Parts Suspension And Steering Travelling Procedures Lighting And Other Switches Starting And Stopping The Engine Crane Operation Procedure




Utility Vehicle

Modules /topics (outline only) Introduction to the Machine Load Charts General, Safety Procedures Battery Care Faulty Finding Stacking Rules Daily inspection checklist Level Techniques Hazardous Labels Principles of Balance




Winch Operator

Modules /topics (outline only) Installing A Sling Eyebolt Scraping Procedure General, Safety Procedures Preparation For Operation Installing A Temporary Return Leg Attaching The Pusher Legs Installing A Centre Gully Scraper Installing Signaling System Rig Up A Face Scraper First Time Operation



ENGINEERING COURSES


Air Conditioning

Modules /topics (outline only) • Introduction safety and P.P.E • The four major function • Understanding heat • Change of state • Pressure & temperature relationship • The Ozone Layer • R134a properties • Principles of air conditioning • Expansion block valve system • Parallel flow condenser system • Orifice tube system • Expansion valve dual system • Compressors • Clutches • Lubrication • Condensers • Foam seals • Condenser electric fans • Evaporators • Thermal expansion valve • Super heat • Orifice tube • Filter drier receiver • Accumulators • “O” rings • Hoses • Charging ports • Wiring • A/C systems • Blower speed control • Compressor cycling control • Protective sensors • Temperature control • Mode control • Electronic temperature control (ECC) • Recovery & Recycling equipment • Evacuation equipment • Charging stations • Combination units & Refrigerant safety • Leak detections & detectors




Boiler Maker

Modules /topics (outline only) • Introduction To Safety & Personal Protection Equipment • Safety Theory and Hand Tools Theory. • Heavy Duty Machines Theory • Acetylene Cutting Equipment Theory and Practical. • Co2 Welding Theory and Practical • Engineering Drawings Theory and Practical. • Drawing Abbreviations.

• Comprehensive Theory Tests. • Arc Welding and Plasma Cutting. • Basic Arc Rod Welding (Tack Welding). • Operating Settings On Inverter Arc Welder Machine. • Plasma Cutting Torch Operation. • Operating Settings On Plasma Cutting Machine. • Guillotine Machine Operation. • Plate Rolling Machine Operation. • Cut Off Grinder Operation. • Acetylene Cutting Torch Operation. • Portable Grinders Large and Small Operation. • Draw Geometric and Mark Off Fabrication Projects. • Basic Hand Saw Uses. • Drilling Machine Operation. • Pedestal Grinder Operation.




Carpentry

Modules /topics (outline only) Identification Of Unsafe Working Condition Introduction To Safety Hazardous Waste Use Of Power Tools Mold Hand Tools Operation Leader Safety Use Of Scaffolds Personal Protection




CCTV Camera Installation

Modules /topics (outline only) • Measuring Resistance and Distribution Board Wiring • Selecting Conductors and Cables • Testing Low Tension Cables • Fit a Compression Glands • Fit a Gland and Tool Hunting Practical • Join a Low Tension Cable • Wire a Panel and Electrical Motor Drawings • Explain Single-Phase Transformers • Explain Three-Phase Transformers • Explain Delta and Star Connection • Explain single phase Earth Leakage Protection Circuit • Explain Three phase Earth Leakage Protection Circuit • Safe Work Practices • Convert Units & Prefixes • Electromagnetism • Analyze Electrical Units • Identifying Lighting and Lighting Circuit • Explain Single Phase Power Supplies • Explain Three Phase Power Supplies • Fuses and Breakers for Various Application • Read Energy Meters • Using Electrical Testing Meters

Duration 30 Days

NQF level and Unit Standard (US) number if registered or aligned with SAQA



Diesel Mechanic

Modules /topics (outline only) • Introduction To Safety & Personal Protection Equipment. • Safety Theory and Hand Tools Theory. • Heavy Duty Machines Theory. • Motor Industry Generic Training: Locking Devices. • Early Fuel Injection Systems. • Assess and Repair Heavy Duty Vehicle (HDV), Steering and Suspension. • Mechanical and Electrical Injection • Comprehensive Theory Tests. • Injection Types: Indirect , Direct, Unit Direct and Common Rail Injection • Safety and Personal Protective Equipment • Cold Weather Starting Procedure • Remove, Assess, Recondition and Replace Cylinder Heads. • Identifying, Removing and Repairing Bushes and Bearings. • Understanding the Fundamentals of Lubrication. • Removing, Assessing and Replacing Cooling System Components. • Care and Use of Trade Tools. • Understanding Basic Electronics.




Plumbing

Modules /topics (outline only) • House Keeping: Introduction To Safety & Personal Protection Equipment. • Safety Theory, Hand Tools Theory And Practicals. • Water Systems Pipe Layout, Fittings And Jointing. • Sanitary, Drainage And On-Site Domestic Water Management Systems. • Mechanical Services, Trench Support And Roof Drainage Gutters. • Sanitary Ware Appliances Installations, Plan Preparations And Reading. • Fascias, Gutters And Irrigation Systems. • Solar Water Heating Installation And Maintenance. • Fault Finding And Repairs. • Fire Hydrant And Hose Reel With Or Without Pump. • Installation And Use Of Flexi Hose And Crimping. • Installation And Testing: Gas Pipe, Appliances And Cylinder Installations. • Install And Maintain Soil, Waste And Vent Pipes Systems. • Fabricate And Install Sheet Metal Components. • Manage Time Productively And Self Development • Care And Use Of Trade Tools And Hand Tools. • Understanding Basic Electronics. • Draining Excavation. • Timbering And/Or Shoring. • Taking Levels – Drain Laying And Pipe Laying. • Fitting And Fixing Junctions, Bends And Traps. • Construction On Manholes And Inspection Chambers. • Septic Tanks And Filter Installations. • Construction Of Absorption Trenches And Transpiration Trenches. • Maintain On – Site Sewerage Facilities.

• Maintain On – Site Treatment Plant Installation Work. • Install Hot And Cold Water Service. • Install Backflow Prevention Device. • Adjust A Range Of Values, Flushing And Mechanical Devices For Correct Flow And Operation. • Install Potable Water Storage Systems. • Install Water Treatment. • Install Discharge Pipes For Sanity Plumbing Installation. • Fabricate And Install Soil And Waste Stacks. • Install And Fit Off Sanitary Fixtures. • Installation And Use Of Class 1 And Class 2 Copper Pipe And Connections. • Understanding And Explaining The Need For A Sleeve On Piping. • Understanding The Regulations Of Gas Cylinder Placements. • Understanding Why Testing Is Done And What Methods Can Be Used. • Understanding The Need For Ventilation In Regards With Gas And Fumes. • Pipe Sizing And Clculations Of Approximate Lengths. • Installation And The Need For Shut Off Valves Theoretical And Practical. • Working Out Quotes For Customers. • Supervisory And Management Techniques.




Dstv Installation

Modules /topics (outline only) • Introduction To Safety And Personal Protective Equipment. • Safety Theory And Hand Tools Theory. • Drilling Machine Safety. • Ladders And Lifting Equipment Safety. • Satellite Dish Kit Components. • Installing Software And Locating The Satellite. • Choosing Where To Install The Satellite Dish. • Cable Specifications. • Selecting A Mounting Option. • Installing The Mount On A Wooden Deck Post. • Installing The Mount On A Wood Framed Roof. • Installing The Mount On Concrete Or Concrete Masonry Walls. • Installing The Mount Onto A Metal Pole. • Installing The AZ/EL Cap Onto The Satellite Dish. • Installing The Transmitter/Tria Assembly On The Feed Arm. • Connecting The Feed Arm To The Satellite Dish. • Installing The Satellite Dish/Cap Assembly Onto The Mast. • Installing And Routing Interior Cable. • Installing Exterior Cables And Connecting To Ground Block. • Connecting The Cable To The LNB. • Grounding The Satellite System. • Grounding The Mast. • Grounding The Metal Pole. • Attaching The Shroud. • Pointing The Satellite Dish. • Connecting The Transmitter.




Refrigeration

Modules /topics (outline only) • Introduction Safety And P.P.E • Repair And Safety Precautions • Refrigerator Heat Flow And Air Flow • Defrost System • Temperature Control • Special Types Of Refrigerators • Diagnosis And Repairs • Principles Of Refrigeration • Optional Tools • Using A Vom And Ammeter • Testing Voltage • Testing For Continuity And Resistance • Testing Amps In The Main Power Line • Controls • Cold Control/ Air Door Identification • Energy Saver • Mullions And Sweat • Condenser And Condenser Fan • Compressor • Evaporator Fan • Frost Problems • Defrost Heater • Terminating Thermostat • Drive Gear Installation • Hoses • Power Supply • Wiring And Electrical • Testing The Compressor For Power • Compressor Starting • Drain System • Refrigerator Door Seals And Alignment • Strange Refrigerator Noises • Fire In The Fridge • Icemaker Operations • Blocked Fill Tube • Fill Solenoid Valve • Combination Units & Refrigerant Safety • Leak Detections & Detectors • Trouble Shooting

