June 2020 Kee Rigid Anchor – Epoxy Adhesive Product Data Sheet KRA-EPX SEPARATING PEOPLE FROM HAZARDS Safe Codes & Standards: n OSHA 1910.66 n OSHA 1910.140 n Cal/OSHA Title 8, Section 3291 n ANSI /IWCA I-14.1 n ANSI Z359.18 n 5000 lb load without permanent deformation Productive n Easy to use on site n Maintenance free n Three attachment options for fall arrest and tie-back applications n Suitable for all roof types Quality n Galvanized finish to ASTM A123 n Insulated interior to prevent thermal bridge & condensation n Dynamically and statically tested and proven
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
June 2020
Kee Rigid Anchor – Epoxy AdhesiveProduct Data Sheet KRA-EPX
S E P A R A T I N G P E O P L E F R O M H A Z A R D S
SafeCodes & Standards:n OSHA 1910.66 n OSHA 1910.140n Cal/OSHA Title 8, Section 3291n ANSI /IWCA I-14.1n ANSI Z359.18n 5000 lb load without permanent deformation
Productiven Easy to use on siten Maintenance freen Three attachment options for fall arrest and tie-back applicationsn Suitable for all roof types
Qualityn Galvanized finish to ASTM A123n Insulated interior to prevent thermal bridge & condensationn Dynamically and statically tested and proven
Kee Klamp, Kee Lite, Kee Stainless, KeeGuard, Kee Dome, Kee Hatch, Kee Mark, Kee Access, Kwik Kit, Kee Anchor, Weightanka, Wireanka, KeeLine, Kee Walk and Kee Projects are all registered trademarks of Kee Safety Ltd, Beam Clamp, and Box Bolt are all registered trademarks of Access Technologies Ltd, a subsidiary of Kee Safety International Ltd. While every effort has been made to ensure the accuracy
of the information contained in this brochure, Kee Safety, Inc cannot be held responsible for any errors or omissions. Kee Safety, Inc reserves the right to alter or withdraw products without prior notice. Kee Safety, Inc does not accept responsibility for any loss or damage arising from improper use of its products.
Copyright 2020 Kee Safety, Inc. All Rights Reserved.
8” MinimumAbove roof
20” StandardPost Length
(Custom lengths available)
Spun AluminumFlashing Optional
4½” diameter Anchor PostCavity filled with polyurethane insulation
Base Plate5/8” x 12” x 12”
Roof constructionInsulation thickness &
details may vary
Kee Rigid Anchor – Epoxy AdhesiveProduct Data Sheet KRA-EPX
Contact us for applications on moderate to high slope roofs.Use Kee Safety flashings with Kee Safety anchors for best compatibility.Anchors can be designed into the structure of your building by calculation in accordance with ANSI/AISC 360-16. Contact our team for calculations and complete design packages. Made in the USA.
Fastens onto concrete roof slabs of minimum grade 3000 psi and 8” thickness. Best suited for retrofit.