Available from Warren Distribution, Inc. | 727 South 13th Street. | Omaha, Nebraska 68102 | U.S.A. | 800-825-1235 | 402-341-9397 | Fax: 402-977-5881 | www.mag1.com Stock #/Item # Pack Size Each UPC Case UPC Case SCC Case Dimensions Case Cube/ Pallet Cube Case Weight/ Pallet Weight Pallet Stack 12/1 Quart 62891 / MG0D53PL 0 71621-62891 1 0 71621-62892 8 1 00 71621-62891 8 L 13.250" x W 10.250" x H 9.250" 0.727 / 77.500 24.425 / 2393.624 98 Cases (7 layers of 14) 55 Gallon 62896 / MG0D5355 0 71621-62896 6 N/A N/A L 23.000" x W 23.000" x H 35.000" 10.710 / 44.444 430.283 / 1721.132 4 Drums SAE 5W-30 FULL SYNTHETIC MOTOR OIL MAG 1 dexos1 ™ Full Synthetic Motor Oil is a state of the art, advanced technology motor oil which provides the highest level of engine protection available, even under the most severe operating conditions. MAG 1 dexos1 ™ Full Synthetic Motor Oil provides exceptional resistance to high temperature oxidation thickening. Our sophisticated additives prevent sludge formation commonly caused by moisture and combustion by-products. Exceptionally high viscosity indices minimize cold weather oil thickening, which greatly reduces battery drain and engine wear, even at subzero start ups. • MAG 1 dexos1 ™ Full Synthetic Motor Oil is formulated to prevent engine wear. Even in the most severe GM tests MAG 1 dexos1 ™ Full Synthetic Motor Oil exceeds the performance limits by 65% • MAG 1 dexos1 ™ Full Synthetic Motor Oil keeps pistons cleaner than GF-5 minimizing oil consumption and maintaining power and compression performance • MAG 1 dexos1 ™ Full Synthetic Motor Oil chemistry significantly outperforms the industry requirement, reducing engine sludge to near zero • MAG 1 dexos1 ™ Full Synthetic Motor Oil is emission conserving protecting the car’s catalyst system to help protect the environment Exceeds GM dexos1 ™ specifications for world wide warranty requirements for all GM automotive gasoline engines currently in use. Meets requirements of API SN, SM or SL and ILSAC GF-5 or GF-4. Suitable for use where GM 4718M and GM 6094M was previously recommended. License No. RB1A1104025 Property Test Method Min Max Typical Specific Gravity at 60°F ASTM D4052 N/A N/A 0.8522 API Gravity ASTM D287 N/A N/A 34.54 Viscosity at 100°C, cSt ASTM D445 9.3 <12.5 10.93 Viscosity at 40°C, cSt ASTM D445 N/A N/A 63.95 Viscosity Index ASTM D2270 N/A N/A 163 ASTM Color ASTM D1500 N/A N/A 2.5 Cold Cranking Simulator, cP ASTM D5293 N/A 6600 4800 Zinc, % mass ASTM D5185 N/A N/A 0.085 Phosphorus, % mass ASTM D4951 0.06 0.08 0.072 Calcium, % mass ASTM D5185 N/A N/A 0.214 Molybdenum, % mass ASTM D5185 N/A N/A 0.008 Boron, % mass ASTM D5185 N/A N/A 0.023 Sulfur, % mass ASTM D4951 N/A 0.5 0.252 Nitrogen, % mass ASTM D5762 N/A N/A 0.102 Sulfated Ash, % mass ASTM D874 N/A N/A 0.92 Typical Physical Properties MAG1 Full Synthetic dexos 1™ dexos 1™ GF-5 GF-4 Oxidation Control Fuel Economy Emission Compatibility Wear Control Cleanliness & Sludge • Our WPD average over a number of tests is 4.7, exceeding the dexos 1 requirement of 4.5. • Sequence VG sludge limit for the dexos 1 specification is 8.3 min. The performance of our MAG1 Full Synthetic dexos1 ™ technology, even in the most severe industry group II stocks, comfortably exceeds both of these limits at 9.3. • Opel RNT test- the wear performance of the HiTEC 11100 technology is a fraction of that allowed by the test limits. Our Opel result was 65% better than the spec limit. • Noack Volatility- our typical is 10.5% vs. the dexos 1 requirement of 13%.