work chairs seating price & user guide – November 28 2018 sabrina overview • Sabrina Chairs and Stools have been designed and tested for users weighting up to 300 lbs • Sabrina Chairs are equipped with casters intended for use on carpeted surfaces Use of these casters on hard surfaces could result in unexpected rolling and tipping Casters designed for use on hard surfaces are available If in doubt, see your dealer for appropriate selection • Synchro-Tilt mechanism with 278:1 ratio Sabrina is an innovative and classically elegant, yet modern chair with infinite appeal. Optional Lumbar Support with Height Adjustment of 2 3/8" Back Tilt lock and Limiter Optional Forward Tilt (Not shown) Optional Plastic Adjustable Arm with Height-Adjustment of 4" Polished Aluminum Detailing Swivel Stool has an all-aluminum footring with 4" Height Adjustment (Not shown) 2 3/8" (60mm) Seat Height Adjustment of 4" (Not Shown) Five Star Base Statement of Line Reclining Tension Adjustment Optional Mesh Headrest Optional Coat Hanger Seat Depth Adjustment of 2" (Not shown) Optional Fixed Polished Aluminum Arm with Plastic Arm Pad or Plastic Adjustable Arm with Arm Pad Pivots: 20˚ inwards, 20˚ outwards and Slides Forward and Backward Innovative Frame with Back Fit and Torsional Passive Flex Capability Sabrina Mesh Back No Headrest – No Coat Hanger No Headrest – With Coat Hanger With Headrest – No Coat Hanger With Headrest – With Coat Hanger Swivel Stool No Headrest – No Coat Hanger Swivel Stool No Headrest – With Coat Hanger Swivel Stool With Headrest – No Coat Hanger Swivel Stool With Headrest – With Coat Hanger
8
Embed
Sabrina is an innovative and classically elegant, yet ... · Sabrina is an innovative and classically elegant, yet modern chair with infinite appeal. Optional Lumbar Support with
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
work chairs
seating price & user guide – November 28 2018
sabrina overview
• Sabrina Chairs and Stools have been designed and tested for users weighting up to 300 lbs• Sabrina Chairs are equipped with casters intended for use on carpeted surfaces . Use of these casters on hard surfaces could result in
unexpected rolling and tipping . Casters designed for use on hard surfaces are available . If in doubt, see your dealer for appropriate selection
• Synchro-Tilt mechanism with 2 .78:1 ratio
Sabrina is an innovative and classically elegant, yet modern chair with infinite appeal.
Optional Lumbar Support with Height Adjustment of 2 3/8"
Back Tilt lock and Limiter . Optional Forward Tilt
(Not shown)
Optional Plastic Adjustable Arm with Height-Adjustment of 4"
Polished Aluminum Detailing
Swivel Stool has an all-aluminum footring with 4"
Height Adjustment (Not shown)
2 3/8" (60mm)
Seat Height Adjustment of 4" (Not Shown)
Five Star Base
Statement of Line
Reclining Tension Adjustment
Optional Mesh Headrest
Optional Coat Hanger
Seat Depth Adjustment of 2" (Not shown)
Optional Fixed Polished Aluminum Arm with Plastic Arm Pad or Plastic Adjustable Arm with Arm Pad . Pivots: 20˚ inwards, 20˚ outwards and Slides Forward and Backward
Innovative Frame with Back Fit and Torsional Passive Flex
Capability
Sabrina Mesh Back
No Headrest – No Coat Hanger
No Headrest – With Coat
Hanger
With Headrest – No Coat Hanger
With Headrest – With Coat
Hanger
Swivel StoolNo Headrest –
No Coat Hanger
Swivel StoolNo Headrest –
With Coat Hanger
Swivel StoolWith Headrest –
No Coat Hanger
Swivel StoolWith Headrest –
With Coat Hanger
work chairs
seating price & user guide – November 28 2018
sabrina dimensions & material requirements
DUAL UPHOLSTERED COM COL [yards] [sq . ft]
Seat only 7/8 8 3/4
Arm
Hei
ght
from
Sea
t A
djus
tabl
e A
rm 6
9/1
6" -
10
1/2"
Fi
xed
Arm
8 5
/8"
Width Between Arms 18 1/4"
Back Width 18 5/8"
Lumbar Apex Height 6" - 8 3/8"
Seat Depth 15 3/8" - 17 5/16"
Seat
Hei
ght
from
Flo
orH
igh
17 1
/2"
- 22
1/2
"St
anda
rd 1
6 1/
8" -
20
5/16
" Lo
w 1
4 3/
4" -
17
1/2"
Angle between Seat and Back 95˚ - 106.4˚(98˚ - 109.4˚ with forward tilt)
Dimensions
For Conversion to Metric, multiply dimension by 25 .4 .
COM/COL Material Requirement
More yardage may be required depending upon the upholstery pattern, repeat, directionality and pattern matching . Leather yield varies from 60-80% and may be affected by the quality of the COL including location and quantity of blemishes, size and shape of hide . The size of the sewing pattern and the number of units ordered may also impact yield . Always round-up to the next hide .
Ove
rall
Hei
ght
(Wit
hout
Hea
dres
t)40
" -
44"
Overall Width 27"
Overall Depth 27"
WEIGHTTask Chair with Headrest 42 lbs Task Chair no Headrest 41 lbs
Seat Width 20 3/16"
Hea
dres
t H
eigh
t7
1/2"
Bac
k H
eigh
t fr
om S
eat
23"
Task Chair
work chairs
seating price & user guide – November 28 2018
sabrina dimensions & material requirements (continued)
DUAL UPHOLSTERED COM COL [yards] [sq . ft]
Seat only 7/8 8 3/4
Dimensions
For Conversion to Metric, multiply dimension by 25 .4 .
COM/COL Material Requirement
More yardage may be required depending upon the upholstery pattern, repeat, directionality and pattern matching . Leather yield varies from 60-80% and may be affected by the quality of the COL including location and quantity of blemishes, size and shape of hide . The size of the sewing pattern and the number of units ordered may also impact yield . Always round-up to the next hide .
WEIGHTSwivel Stool with Headrest 41 - 45 .5 lbsSwivel Stool no Headrest 40 - 44 .5lbs
Swivel Stool
Bac
k H
eigh
t fr
om S
eat
23"
Ove
rall
Hei
ght
(Wit
h H
eadr
est)
43-3
/4"
- 51
-3/4
"H
eadr
est
Hei
ght
7 1/
2"
Arm
Hei
ght
from
Sea
t A
djus
tabl
e A
rm 6
-9/1
6 –
10-
1/2
Fixe
d A
rm 8
1/4
"
4" H
eigh
t
Adj
ustm
ent
Back Width 18 5/8"
Seat Depth 15 3/8" - 17 5/16"
Overall Width 27"
Overall Width 27"
Seat Width 20 3/16"
Lumbar Apex Height 6" - 8 3/8"
Seat
Hei
ght
from
Flo
or20
-3/4
“-
28-3
/4"
Angle between Seat and Back 95˚ - 106˚
Width Between Arms 18 1/4"
work chairs
seating price & user guide – November 28 2018
sabrina adjustment features & instructions
RECLINING TENSION ADJUSTMENT TILT LOCK AND LIMITER
ARM HEIGHT ADJUSTMENT ARM PAD ADJUSTMENT
LUMBAR SUPPORT SEAT DEPTH ADJUSTMENT
While sitting in the chair, grab the height adjustable arm pad from the top and slide it away from your body, along the length of the arm cap, or towards you to match your physical requirements . Once positioned, rotate the arm pad angle toward your body or away from you to match your physical requirements .
To adjust the height adjustable arm height, press the button below either arm rest to raise or lower it to the desired position .
Turning the grip found under the left side of the seat locks and unlocks the recline and forward-tilt seat, when specified . Rotate forward to unlock and backward to lock . Unlock, completely recline and return to an upright to re-set .
Turning the grip found under the right side of the seat increases or reduces the resistance of the chair back while reclining and forward-tilt when specified . Rotate forward to tighten and backwards to loosen .
While sitting in the chair, put arms behind back to grab both sides of lumbar element, slide lumbar up or down to match your physical requirements .
To adjust the seat depth, pull outward on the button below the seat on the left-hand side and simultaneously lift your weight from the seat while sliding the seat forward or backward . Release button to lock the seat in place .
work chairs
seating price & user guide – November 28 2018
sabrina adjustment features & instructions (continued)
SEAT HEIGHT ADJUSTMENT FIT AND FLEX BACK
While the center frame firmly supports the user sitting, the slide frame allows passive forking right and left as the user twists, or flexes torsionally .
Seat height can be adjusted by pulling up on the lever below the seat on the right hand side . When this lever is pulled, the weight of the body will cause the seat to lower, and releasing it stops the seat at the desired height . Pulling up on the lever with no weight on the seat allows it to rise .
STOOL FOOT RING HEIGHT
To raise or lower the stool’s foot ring, turn the foot ring’s knob counter-clockwise to release the foot ring and adjust the ring until you reach desired level . Turn the knob clockwise to lock in place .
work chairs
seating price & user guide – November 28 2018
N S B YSabrina – Synchro-Tilt Task Chair
FEATURES• Synchro-Tilt mechanism (2.78:1 tilt ratio) with Tilt-Tension and Lock. Back
recline up to 23°• Optional forward tilt seat• Innovative, organic structured back frame with FIT & FLEX capability • Seat Depth Adjustment of 2"• Standard pneumatic cylinder provides height-adjustment of 4"• Ebony Plastic or Polished Aluminum base• Optional Plastic height-adjustable arms with pivoting arm pads and arm pad depth
adjustment or Fixed Polished Aluminum arms• Optional 2-3/8" height-adjustable Lumbar Element, fixed mesh Headrest and Coat Hanger• Hard casters are standard and well suited for soft flooring such as carpeting• Soft casters are available for use on hard flooring, such as wood, concrete or tileNOTESHeadrest finishes default to Back Upholstery finish and Frame finish. Lumbar membrane is translucent Ebony finish. Coat Hanger finish defaults to frame finish.Plastic Arm finish matches frame finish (Very White arm has Grey arm pad).Polished Aluminum arm has Ebony arm pad to match Ebony frame and Grey arm pad with Very White frame.Sabrina Chair is Dual Upholstery with Sabrina Mesh available on the back and Teknion’s Standard and Graded-In fabrics on seat.Headrest and Coat Hanger Accessories must be installed on-site by customer to Fully Assembled (F) chairs.Not Fully Assembled (N) option is only available when Accessories option No Headrest-No Coat Hanger (N) is specified.Not all configurations are available as Xpress. Please see Xpress catalogue and/or specification software for details.
Xpress
No Headrest – No Coat Hanger
Adjustable Arm
Fixed Arm
No Headrest – With Coat
Hanger
With Headrest – No Coat Hanger
With Headrest – With Coat
Hanger
Accessories
N No Headrest – No Coat Hanger
C No Headrest – With Coat Hanger
H With Headrest – No Coat Hanger
Y With Headrest – With Coat Hanger
Lumbar Element
N No Lumbar Element
Y With Lumbar Element
Arm Style
N No Arms
H Height-Adjustable T-Arms with Pivot and Depth-Adjustable Arm Pads
A Fixed Polished Aluminum Arms
Back Upholstery
Finish (Sabrina Mesh
Back)
SB15 Iron
SB16 Basalt
SB17 Chain-link
SB19 Brier
SB20 Banner
SB21 Lapis
Seat Upholstery
Finish (For Dual)
Fabric
Leather
Cylinder Style
1 Standard
2 High
3 Low
Mechanism Style
~ Standard
F Standard with Forward Tilt
Frame Finish
52 Ebony
8C Very White
Base Finish
52 Ebony
C9 Polished Aluminum
Casters/ Glides
(Optional)
~ Casters, Hard
A Casters, Soft
B Glides, Hard
C Glides, Soft
Other Options
F Fully Assembled (accessories require installation)
If No Headrest, With Coat Hanger (C) is specified add 140
If With Headrest, No Coat Hanger (H) is specified add 181
If With Headrest, With Coat Hanger (Y) is specified add 323
If Lumbar Element (Y) is specified add 59
If Standard with Forward-Tilt Mechanism (F) is specified add 35
If Polished Aluminum Base (C9) is specified add 81
If Soft Casters (A) are specified add 21
If Hard Glides (B) are specified add 21
If Soft Glides (C) are specified add 33
work chairs
seating price & user guide – November 28 2018
N S B DSabrina – Swivel Stool
FEATURES• Synchro-Tilt mechanism (2 .78:1 tilt ratio) with Tilt-Tension and Lock . Back recline
up to 9°• Includes all-aluminum foot ring with 4" height adjustment• Innovative, organic structured back frame with FIT & FLEX capability • Seat Depth Adjustment of 2"• Standard pneumatic cylinder provides height-adjustment of 8"• Ebony Plastic or Polished Aluminum base• Optional Plastic height-adjustable arms with pivoting arm pads and arm pad depth
adjustment or Fixed Polished Aluminum arms• Optional 2-3/8" height-adjustable Lumbar Element, fixed mesh Headrest and Coat Hanger• Hard casters are standard and well suited for soft flooring such as carpeting• Soft casters are available for use on hard flooring, such as wood, concrete or tileNOTESHeadrest finishes default to Back Upholstery finish and Frame finish . Lumbar membrane is translucent Ebony finish . Coat Hanger finish defaults to frame finish .Plastic Arm finish matches frame finish (Very White arm has Grey arm pad) .Polished Aluminum arm has Ebony arm pad to match Ebony frame and Grey arm pad with Very White frame .Sabrina Chair is Dual Upholstery with Sabrina Mesh available on the back and Teknion’s Standard and Graded-In fabrics on seat . Not Fully Assembled (N) option is only available when Accessories option No Headrest-No Coat Hanger (N) is specified .
No Headrest – No Coat Hanger
Adjustable Arm
Fixed Arm
No Headrest – With Coat
Hanger
With Headrest – No Coat Hanger
With Headrest – With Coat
Hanger
Accessories
N No Headrest – No Coat Hanger
C No Headrest – With Coat Hanger
H With Headrest – No Coat Hanger
Y With Headrest – With Coat Hanger
Lumbar Element
N No Lumbar Element
Y With Lumbar Element
Arm Style
N No Arms
H Height-Adjustable T-Arms with Pivot and Depth-Adjustable Arm Pads