Standards Quality Assurance Excitation and Voltage Regulators AVR Type MX322 DECS100 DECS150 Voltage Regulation ± 0.5% ± 0.25% ± 0.25% AVR Power PMG PMG PMG Full Load Excitation Voltage (V) 75 Full Load Excitation Current (A) 3.5 Exciter Time Constant (seconds) 0.165 with 4% Engine Governing No Load Excitation Voltage (V) 25.50 No Load Excitation Current (A) 1.27 S7L1M-J4 Wdg.13 - Technical Data Sheet STAMFORD industrial alternators meet the requirements of the relevant parts of the IEC EN 60034 and the relevant section of other international standards such as BS5000, VDE 0530, NEMA MG1-32, IEC34, CSA C22.2-100 and AS1359. Other standards and certifications can be considered on request. Excitation System Alternators are manufactured using production procedures having a quality assurance level to BS EN ISO 9001. Page 1 S7L1M-J4_Wdg.13_ES10456747_Rev.A_20.08.2019
9
Embed
S7L1M-J4 Wdg.13 - Technical Data Sheet - STAMFORD | AvK
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Standards
Quality Assurance
Excitation and Voltage Regulators
AVR Type MX322 DECS100 DECS150
Voltage Regulation ± 0.5% ± 0.25% ± 0.25%
AVR Power PMG PMG PMG
Full Load Excitation Voltage (V) 75
Full Load Excitation Current (A) 3.5
Exciter Time Constant (seconds) 0.165
with 4% Engine Governing
No Load Excitation Voltage (V) 25.50
No Load Excitation Current (A) 1.27
S7L1M-J4 Wdg.13 - Technical Data Sheet
STAMFORD industrial alternators meet the requirements of the relevant parts of the IEC EN 60034 and the relevant
section of other international standards such as BS5000, VDE 0530, NEMA MG1-32, IEC34, CSA C22.2-100 and
AS1359. Other standards and certifications can be considered on request.
Excitation System
Alternators are manufactured using production procedures having a quality assurance level to BS EN ISO 9001.
Voltage Factor Voltage Factor Minimum x 1.00 x 1.80 x 3.20
- - 380V x 1.00 Sustained x 1.00 x 1.50 x 2.50
- - 400V x 1.05 Max. sustained duration 10 sec. 5 sec. 2 sec.
- - 416V x 1.09
- - - -
The sustained current value is constant irrespective
of voltage level
All other times are unchanged
S7L1M-J4 Wdg.13
Three-phase Short Circuit Decrement Curve - Separately Excited
Sustained Short Circuit = 16364 Amps
Sustained Short Circuit = Amps
Note 1The following multiplication factors should beused to adjust the values from curve betweentime 0.001 seconds and the minimum currentpoint in respect of nominal operating voltage :
Note 2The following multiplication factor should be used to convert thevalues calculated in accordance with NOTE 1 to thoseapplicable to the various types of short circuit :
Note 3Curves are drawn for Star connections under no-load excitation at rated speeds. For other connection (where applicable) the following multipliers should be applied to current values as shown : Parallel Star = Curve current value X 2Series Delta = Curve current value X 1.732