This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Marketing Bulletin
Ives Price Book
1. Page 3 – 3CB1 Butt Hinges – Description updated to include Electric Thru Wire Availability 2. Page 7 – 3SP1 4.5X4.5 629 Butt Hinge - Price updated from $62.30 to $64.80 3. Page 7 – 3SP1 4.5X4.5 630 Butt Hinge - Price updated from $59.40 to $61.80 4. Page 12 – 5BB1SC 4.5 630 Butt Hinge - Price updated from $70.00 to $79.60 5. Page 12 – 5BB1SC 5 630 Butt Hinge - Price updated from $91.00 to $92.80 6. Page 12 – 5BB1SCHW 5 630 Butt Hinge - Price updated from $117.30 to $140.80 7. Page 14 – Electrical Options for Butt Hinges – Added the following note to clarify availability of offering
• TW not available for 3.5X3.5 hinges, contact technical support. 8. Page 17 – Pin & Barrel Continuous Hinge Custom Painting Flat Rate Price for quantities less than 12 hinges
– Price updated from $600 to $900 9. Page 18 – CS Pin & Barrel Continuous Hinge Custom Painting Flat Rate Price for quantities less than 12
hinges – Price updated from $600 to $900 10. Page 20 – Geared Continuous Hinge Custom Painting Flat Rate Price for quantities less than 12 hinges –
Price updated from $600 to $900 11. Page 20 – The Electric Through-Wire Power Cables for separate LH and RH were removed 12. Page 20 – Through Wire Panel Service Kits – Description changed to better identify part numbers to order 13. Page 20 – Through Wire Panel Cable Kit – Description changed to better identify part number to order 14. Page 20 – Optional Screws – Security Screws – Price updated from $32.00 to $29.50 15. Page 20 – Optional Screws – Wood Screws – Price updated from $18.00 to $17.50 16. Page 20 – Optional Screws – Thread Forming Screws – Price updated from $18.00 to $17.50 17. Page 20 – No Charge Adds – Description changed to add the following offering
• ½ Wood / ½ Self drilling/Self tapping Specify TEK/WD 18. Page 21 – 7215PT INT – Price updated to the following.
22. Page 31 – FB51 – The lines dividing the different substrates offered were corrected 23. Page 33 – SRT (WSPART.1076) – Price updated from $30.50 to $30.00 24. Page 33 – RT (WSPART.1075) – Price updated from $21.10 to $20.00 25. Page 34 – SRT (WSPART.1076) – Price updated from $30.50 to $30.00 26. Page 35 – RT (WSPART.1075) – Price updated from $21.10 to $20.00 27. Page 35 – SR64 GRY (100/pk) – Price moved from the Package column to the Each column 28. Page 35 – WS65 US10AL – BHMA Finish corrected to 668 29. Page 35 – WS65 US10B-AL – BHMA Finish corrected to 703 30. Page 35 – WS65 US3AL – BHMA Finish corrected to 666
Brand/product Ives - Accessories
Date December 15, 2015
Subject Price Book Update – 3 2015
Marketing Bulletin 31. Page 35 – WS65 US27 – BHMA Finish corrected to 664 32. Page 36 – 70 Hinge Pin Door Stop – Picture Updated for Brass Offering 33. Page 37 – RT (WSPART.1075) – Price updated from $21.10 to $20.00 34. Page 39 – SP261B3 Flush Bolt – Multiple Qty updated from 1 to 15 35. Page 39 – SP261B15 Flush Bolt– Multiple Qty updated from 1 to 15 36. Page 41 – WS401/402CVX Wall Bumper – Model changed to correct naming and to show package contains
drywall and masonry anchors. Picture was also corrected 37. Page 41 – WS401/402CCV Wall Bumper – Model changed to correct naming and to show package contains
drywall and masonry anchors. 38. Page 42 – 405A14 Coat and Hat Hook – BHMA Finish corrected to 669 39. Page 42 – WS406/407CVX Wall Bumper - Picture was corrected 40. Page 43 – RT (WSPART.1075) – Price updated from $21.10 to $20.00 41. Page 45 – HRT (FSPART.1075) – Price updated from $106.10 to $106.00 42. Page 46 – HRT (FSPART.1075) – Price updated from $106.10 to $106.00 43. Page 49 – SC571B-716 Coat and Hat Hook – removed from Price Book 44. Page 49 – 571Z-619E Coat and Hat Hook –Multiple Qty changed from 25 to 1 45. Page 51 – SP582A14 Wardrobe Hook – BHMA Finish corrected to 669 46. Page 53 – VR910M-DT/VR914M-DT Vandal Resistant Trim – Model numbers separated for each handing 47. Page 59 – Mounting Methods Series Header modified to include Push Bars. Ladder Pulls, and Decorative
Pulls 48. Page 60 – Mounting Methods Series Header modified to include Push Bars. Ladder Pulls, and Decorative
Pulls 49. Page 61 - Series Special Pricing Header modified to include Decorative Pulls 50. Page 61 – Optional Mounting Types – Decorative Pulls availability added to each mounting type 51. Page 61 – Optional Custom Lengths – Descriptions updated to clarify pricing and availability 52. Page 61 – Optional Custom Lengths for lengths >33” – Price updated from $4.50 per inch to $6.00 per inch 53. Page 62 – 8102HD and 8103HD Pulls - Updated Optional Mounting Type availability to reference Page 61
for types and pricing 54. Page 63 – 8103EZHD and 8105 Pulls - Updated Optional Mounting Type availability to reference Page 61
for types and pricing 55. Page 64 – All Pulls Listed - Updated Optional Mounting Type availability to reference Page 61 for types and
pricing 56. Page 65 – 8190HD Pulls - Updated Optional Mounting Type availability to reference Page 61 for types and
pricing 57. Page 67 – 8281 Pull and 8302 Pull Plate - Updated Optional Mounting Type availability to reference Page
61 for types and pricing 58. Page 68 – 8302 Pull Plate - Updated Optional Mounting Type availability to reference Page 61 for types and
pricing 59. Page 69 – 8303 Pull Plate - Updated Optional Mounting Type availability to reference Page 61 for types and
pricing 60. Page 70 – 8305 Pull Plate - Updated Optional Mounting Type availability to reference Page 61 for types and
pricing 61. Page 72 – 8311 Pull Plate and 8312 and 8320 Pulls - Updated Optional Mounting Type availability to
reference Page 61 for types and pricing 62. Page 73 – 8371, 8372, 8373 Pulls - Updated Optional Mounting Type availability to reference Page 61 for
types and pricing 63. Page 74 – 8400 Kick plate Options – Removed separate B4E and CS Models and added B-CS (Bevel four
edges and counter sunk holes) to show as standard offering with no list price add
Marketing Bulletin 64. Page 74 – 8400 Kick plate Options – Change NH and NH-A Model names to B-NH and B-NHA to show
Bevel for edges included as standard with no list price add. Updated availability of No Holes options to include US3, US4, US15, US28, and CLR and BLK finishes.
65. Page 74 – 8400 Kick plate Options – Removed separate TEK and TORX Models and added TK-TX (TEK and TORX) model which now includes both TEK and TORX screws at same list price as before
66. Page 76 – All Pulls Listed - Updated Optional Mounting Type availability to reference Page 61 for types and pricing
67. Page 77 – 9100HD and 9103EZHD Push Bars - Updated Optional Mounting Type availability to reference Page 61 for types and pricing
68. Page 78 – 9190HD Push Bar - Updated Optional Mounting Type availability to reference Page 61 for types and pricing. Added note for Custom Sizing Availability.
69. Page 78 – 9190HD 8” Pull and 28” Push Bar US3 – Corrected Pull CTC and Model Number fields 70. Page 113 – FS452/455 Rubber – Description changed to Order in Quantities of 100. Price updated from
$0.90 to $1.06
Effective October 5, 2015 • Rev. 1/16
Price book 3
This price list supersedes and cancels all previous price lists. Prices shown are subject to change without notice.
Administrative OfficesAllegion Administrative Office11819 N. Pennsylvania St.Carmel, IN 46032allegion.com/us
Customer CareOur Customer Care Representatives are available for questions or assistance. You can reach them at 877-671-7011 (Press 1 for Sales Support | Press 2 for Product Support | Press 3 for SSC) or through the email addresses listed below:
Placing ordersYou can place orders with Allegion via the fax number or email listed below:Fax#:1-877-424-8494Email: [email protected]
Sales Support
Carolinas (North Carolina, South Carolina, Virginia) [email protected]
Central (Arkansas, Illinois, Iowa, Kansas, Missouri, Nebraska, Oklahoma) [email protected]
BAA/ARRAFor a list of available BAA/ARRA compliant products please contact your local SSC or Customer Care at 877-671-7011
ii Ives Price Book 3 Effective October 5, 2015 • Rev. 10/15
Terms and Conditions
1. GENERAL/ACCEPTANCE. (a) This Agreement contains the only terms and conditions by which Company will quote and sell Deliverables to Customer; (b) The terms “purchase order” or “order” for the purposes of this Agreement include the term “request for quotation,” as appropriate; (c) This Agreement supersedes all pre-printed or boilerplate terms and conditions set forth in any purchase order issued by Customer; (d) No reference herein to Customer’s purchase order will in any way incorporate different or additional terms and conditions, all of which Company hereby expressly objects to; (e) ANY ACCEPTANCE BY COMPANY OF CUSTOMER’S PURCHASE ORDER IS EXPRESSLY CONDITIONED ON THE CUSTOMER’S ASSENT TO AND ACCEPTANCE OF THE TERMS AND CONDITIONS CONTAINED IN THIS AGREEMENT; (f) Company reserves the right to decline any order, in whole or in part, for any reason.
2. ORDERS. a. Order Processing. When Customer wishes to place an order for Deliverables, it will deliver to Company a purchase order. All such purchase orders must (i) be in a written format acceptable to Company, (ii) be legible, (iii) include a purchase order number, (iv) include Customer’s account number, invoice address, ship to address, shipping method, shipper’s letter of instruction for international shipments, part number, pricing, and designated contact information, (v) include, if applicable, any special configuration ID numbers, necessary programming information, special factory instructions, and requested specifications regarding a particular finish, handing, design, backset, or strike, and (vi) reference any applicable pricing discounts under an ongoing buying program or based on a written quote from Company, along with the applicable buying program number or quotation number. b. Minimum Orders. In the event the order value does not meet any required minimum net Deliverable value, Company may, at its sole discretion, (i) increase the quantity of items in the order to meet the minimum net Deliverable value requirement; (ii) apply a minimum order charge; (iii) reject the order, or (iv) waive the requirement, provided that the waiver of a requirement for one order shall not constitute a waiver of the requirement for any future orders. c. Acceptance of Purchase Orders. Company will endeavor to (i) acknowledge receipt of each purchase order issued in accordance with this Agreement, and (ii) notify Customer whether Company accepts or rejects the purchase order. If Company fails to accept or reject a purchase order within a reasonable time period, such failure to respond will be deemed a rejection of the entire order. d. Changes to Order/ Cancellation of Orders. Additional terms and conditions regarding order changes and cancellations are available on the Allegion customer website, WHICH TERMS ARE EXPRESSLY INCORPORATED HEREIN BY REFERENCE. Unless otherwise provided herein, Customer acknowledges that (i) requesting a Change Order may cause a delay in the scheduled shipment date, a longer lead time or result in a new scheduled shipment date; (ii) Orders may not be changed after 48 hours of Company’s order acknowledgment; (iii) After 48 hours of Company’s order acknowledgment, all changes to an accepted purchase order will be subject to a Change Order charge of 25% of the net Deliverable value, plus the cost of labor and fabrication or raw material that Company incurred prior to the receipt of the Change Order from Customer, or that may be required due to the Change Order; (iv) the requested change may result in additional charges for labor, fabrication, and raw material, and (v) if Customer cancels an order or portion of an order that includes Deliverables that have been manufactured and prepped for shipping, a 45% restocking fee will apply. Notwithstanding the foregoing, Customer cannot change or cancel credential orders, reader orders, biometrics orders or any non-cataloged, special, Custom or nonstandard items once they have been placed. All cancelled orders for a Non Recurring Expense (NRE), credential orders, reader orders, biometrics orders, and/or Custom orders will be subject to a cancellation charge of 100% of the acknowledged price. e. Add-ons. Add-on orders will not be accepted. Additions to orders will be entered as separate stand-alone orders and must qualify for all terms of sale, including discounts, on an individual basis. f. Fast-Track Orders. No changes or cancellations will be accepted on the 24-Hour Fast Track Program. For 3-day Fast Track orders, changes and cancellations may only be requested by Customer within 24 hours of Company’s order acknowledgment if the order has not shipped. For 5-Day Fast Track orders, changes and cancellations may only be requested by Customer if the order has not shipped and if the request is made to Company within 48 hours of Company’s order acknowledgment. Return Material Authorization (RMA) for Deliverables must be processed through Fast Track Customer Service. g. Steelcraft Orders. For all Steelcraft orders, changes or cancellations are allowed without penalty only if made within 48 hours of Company’s order acknowledgment, and provided that the order has not shipped. Some exceptions do apply – please consult the factory. Changes are not allowed on Rapid Program orders after the order has been entered and acknowledged. After 48 hours of Company’s order acknowledgment, all changes or cancellations are subject to a charge of 25% of the order. Unless otherwise specified by Company in writing, any changes to orders acknowledged by Company that affect the delivery date will be deemed a new order and will require acknowledgement by Company as provided in this Section. Additional products, features, terms and conditions regarding the Rapid Program are available on the Allegion customer website, WHICH TERMS ARE EXPRESSLY INCORPORATED HEREIN BY REFERENCE.
3. PRICES, INVOICES AND PAYMENT. a. Prices. The prices in Company’s Price Book are subject to change at any time, without notice to Customer. Company may charge Customer additional amounts if Customer requests special packing, marking, shipment, product modification, or engineering services. Oral prices specified by Company are null and void. Quote numbers must be referenced on Customer’s purchase order in order for the Company’s quoted pricing to apply. Orders that do not reference a quote number will receive buy program pricing or book net pricing. Quoted prices are for those specific products quoted for a specified job, and are subject to the Price Book in effect at the time the quote was issued by Company. b. Taxes. Prices do not include any present or future federal, state or local property, license, privilege, sales, use, excise, gross receipts or other like taxes or assessments which may result from transactions or any services performed in connection therewith. Any taxes, charges, or duties imposed by any governmental authority on the sale of Deliverables will be paid by Customer, in addition to the selling price specified by Company. c. Payment Terms. Company will deliver to Customer an invoice with each shipment of Deliverables hereunder. Customer will pay all invoiced amounts within 35 days of the invoice date, provided that Customer may take a 2% discount if Customer pays in cash and Company receives said payment within 20 days of the invoice date. For the avoidance of doubt, cash discounts do not apply to credit card payments. Customer will make all payments in United States dollars. Past due invoices will be subject to a late payment service charge of 1.5% per month on any overdue unpaid balance, equivalent to 18% per annum, or the maximum rate permitted by law, whichever is less. Customer shall reimburse Company for all costs of collection, including, without limitation, reasonable attorneys’ fees, for any overdue amount
owed by Customer to Company, and such collection costs shall also be subject to interest charges.
4. QUOTATIONS. a. Project Quotations. Project or new construction quotes are restricted to the specific project quoted for the quantities, finishes, and series of Deliverables referenced on the quote. Company reserves the right to require proof of sale of Company products for any quoted project. b. Stock Quotations. Deliverables fulfilling stock quotations may only be used for the following: i) Stocking of the Customer’s shelves for small, quick-turn, discretionary projects, or ii) Sale to a general contractor or installer for new construction. Stock quotations may not be used for any project containing any Company no-substitution, specified products. Deliverables purchased under Stock Quotations cannot be redistributed to other Customer branch locations or re-sold to other resellers or used for aftermarket sales, end-user annual contracts or sold over the counter to any walk in trade. c. General. All quotes are subject to this Agreement, unless otherwise specified by Company, and are subject to change at any time prior to Company’s acceptance of a purchase order referencing the applicable quote number. Company, its representatives and employees reserve the right, in their sole discretion and for any reason, to refuse a Customer’s request to quote a price other than the standard list price, regardless of whether Company or its representatives or employees have previously quoted discounted prices to the Customer on some or all of its orders. Customer’s failure to comply with this Section 4 will be considered a material breach of this Agreement, and will entitle Company to immediately terminate any purchase orders and/or Customer’s ability to distribute Company’s products.
5. SECURITY INTEREST. Customer grants Company, and Company retains, a purchase money security interest and lien on any and all of Customer’s rights, title and interest in each Deliverable sold by Company to Customer, wherever located, until the invoice for the applicable Deliverable(s) is paid in full, including any late charges and costs of collection. Customer authorizes Company to, and will assist Company in, taking all necessary steps to perfect and maintain Company’s interest in such Deliverables.
6. CREDIT TERMS. Unless Customer pre-pays all of its purchase orders in advance, its purchase orders will be subject to the credit limit and other terms of credit (“Credit Terms”) set forth in Company’s credit application, which Credit Terms Customer acknowledges are subject to change by Company at any time. Company reserves the right to request payment in advance of shipment or any order or to request adequate assurances for Customer’s payment of an order and may withhold or stop shipment, without any liability to Company, until Customer submits payment or adequate assurance of payment.
7. RESALE OF DELIVERABLES. Customer agrees and warrants that it will offer Company products in support of Company-written specifications and will maintain sufficient inventory to adequately support End Users, installers, and/or general contractors’ needs. Company may implement an MSRP or a resale pricing programs at any time in its sole discretion. Failure to comply with such program(s) will be considered a material breach of this Agreement, and will entitle Company to immediately terminate any purchase order and/or Customer’s ability to distribute Company’s products. Customer shall, at its own expense, gain and maintain sufficient knowledge of the industry and products competitive with Deliverables so as to be able to (a) explain in detail to End Users, installers, and/or general contractors the differences between the Deliverables and competing products, (b) ensure that an adequate number of trained, capable and qualified technical personnel with sufficient knowledge of the Deliverables and who have obtained all necessary licenses and permits are available to assist End Users, installers, and/or general contractors, and (c) respond to such End Users, installers, and/or general contractors with respect to the general operation and use of the Deliverables including, but not limited to, (1) acting as a liaison between the End Users, installers and/or general contractors and Company in matters requiring Company participation, (2) providing general product information and configuration support on standard protocols and features, (3) collecting relevant technical problem identification information, and (4) posting and distributing any warranty information concerning the Products in accordance with Company’s instructions. Customer is responsible for all service and support resulting from the re-sale of any Deliverable to End-Users, installers and/or general contractors, examples of which may include, but are not limited to, support activities such as installation, initialization, software set-up, training, trouble-shooting, technical support and field service. In the event Customer is unwilling or unable to perform said support activities, Company reserves the right to recover from Customer any and all expenses incurred by Company to resolve the afore-mentioned End-User, installer and/or general contractor issues. Technical product training is recommended for Customer in order to fully service and support Deliverables purchased from Company that are resold to End-Users, installers and/or general contractors.
8. DEFAULT. If Customer is in default of payment or otherwise with respect to any purchase order or other contract with Company, Company shall have the right, in addition to all other legal remedies and without prejudice to any of its right hereunder, to defer further shipments under that or any other purchase order until such default is corrected and to declare all outstanding bills of Customer to be immediately due and payable.
9. INSPECTION AND DELIVERY. a. Inspection. Customer will inspect all Deliverables immediately after receiving them. Customer will be deemed to have accepted the Deliverables unless Customer notifies Company in writing of any nonconformance within 10 days of delivery and provides Company written evidence reasonably documenting that nonconformance. Inspection of Deliverables at Company’s facility is not permitted. b. Delivery. Delivery schedules for Deliverables are based upon current production capacities, material or component availability, and inventory, and may be changed by Company as conditions require. Delivery schedules for services are based upon Company’s prompt receipt of, and prompt access to, Customer’s equipment and all information necessary to complete the services. In no event will any delivery date be construed as falling within the meaning of “time is of the essence.” Partial delivery shall be accepted by Customer and paid for at the price and on the terms stated herein. Any partial delivery shall constitute a separate sale, and payment shall be separately made when due. If any part of a delivery hereunder is not delivered by Company in accordance with Customer’s purchase order, this Agreement shall not be affected thereby.
10. TITLE & RISK OF LOSS. Unless otherwise specified by Company, (i) where the Customer is located in the United States, all Deliverables will be sold “Uniform Commercial Code, FOB Origin, Company’s factory”; and (ii) where the Customer is located outside of the United States, all Products will be sold “Ex-works, Company’s factory (Incoterms 2010).” In either instance, title and risk of loss will pass to Customer upon delivery to the carrier at Company’s
Allegion General Terms and Conditions of Sale and Service
iii Ives Price Book 3 Effective October 5, 2015 • Rev. 10/15
factory, provided, however, as set forth herein, Company shall retain a security interest in the Deliverables until full payment has been made therefore, and Customer agrees, upon request, to do all things and acts necessary to protect Company’s interest by adequately insuring the Deliverables against loss or damage from any cause and to have Company named as an additional insured. Customer will promptly provide Company with a copy of the relevant certificate of insurance upon Company’s request.
11. SHIPPING. a. Freight Charges. Company will ship all Deliverables in accordance with Company’s freight shipment guidelines, which are set forth on the My Allegion Portal (“Freight Shipping Guidelines”), WHICH TERMS ARE EXPRESSLY INCORPORATED HEREIN. b. Rush Charges. Expedited order options are available as set forth in Company’s freight shipping guidelines. c. Packing and Marking. Company will pack, mark, and ship Deliverables according to its standard procedures for shipment, unless the parties agree, in writing, that Company will comply with any special instructions provided by Customer. Special instructions may result in an increased price. d. International Shipments. For all international orders, a Shipper’s letter of instruction must be submitted in writing with the order. Failure to do so will result in the order being rejected. Complete adherence to this order requirement will be strictly enforced. Company will not be held liable for any charges resulting from delays due to lack of complete required information being supplied. e. Once received by the Company, a Customer purchase order can only be combined with any other order or combined with Company brands (to qualify for freight allowances) in accordance with the Company’s freight shipment guidelines, which are set forth on the My Allegion Portal (“Freight Shipping Guidelines”).
12. CLAIMS. All claims must be submitted in writing to Company as follows: (i) All claims for prices must be submitted within thirty (30) days from the date of invoice; (ii) All claims regarding Deliverable quantity or incorrect orders must be submitted within ten (10) days from the date of delivery; (iii) All claims for damage to Deliverables (while in the care, custody, and control of Company) must be submitted within thirty (30) days from the date of invoice; (iv) All claims for loss or damage to Deliverables while in the care, custody, and/or control of a carrier will be the responsibility of Customer, unless otherwise agreed by the parties.
13. PRODUCT CHANGES. Company’s product policy is one of ongoing update and revision, and accordingly, Company reserves the right to change, without notice, the design of, or the process of manufacturing, the Deliverables covered by this Agreement.
14. PRODUCT USAGE LIMITATION. Customer agrees: (i) not to sell or use a Deliverable in any manner contrary to the manner in which the Deliverable is intended to be used; and/or (ii) not to modify the design of any Deliverable for use with another product without the prior written consent of Company.
15. PRODUCT RETURNS. Unless otherwise agreed by the parties in writing, Deliverables that are correctly furnished by Company per the purchase order may not be returned unless Customer receives written authorization from Company. If returns are authorized by Company, a return merchandise authorization (“RMA”) number must be provided by Company. Deliverables identified under such RMA must be returned to Company within 90 days of issuance of the RMA. Such RMA number and any accompanying RMA documents, the original invoice number, and a written explanation for the return must be included with the returned Deliverables in order for Company to inspect and approve a credit for the return. For warranty returns, a credit in the amount of the original purchase price will only be issued if, after Company’s receipt and inspection of the returned Deliverables, Company confirms, in its sole discretion, the defect is valid and approves the return. For non-warranty returns/convenience returns, in the event Company approves such a return, in its sole discretion, the following shall apply: (a) the total amount of Deliverables requested to be returned shall be a minimum of $250.00; (b) a credit will be made to Customer’s account in the amount of the original purchase price less freight and a handling charge of 45% of the net material on the original invoice; and (c) only Deliverables that are new, current, standard, non-obsolete, non-specially manufactured, unused, in their original condition as at the time of sale by Company to Customer, in their original packaging and in Customer’s inventory less than 180 days from the date of shipment by the Company, and not ordered as part of a master key solution may be considered by Company for return. Such credit will only be issued if, after Company’s receipt and inspection of Deliverables, Company approves the return. The amount of final credit will be determined upon receipt at the factory and following Company’s inspection and analysis of the condition of the returned material. Company retains the right to deny credit to anyone for any reason.
16. CONFIDENTIAL INFORMATION. a. Non-Use And Non-Disclosure. Customer shall not use the Confidential Information of the Company except for the purpose of performing its obligations under this Agreement or exercising the rights granted herein (the “Purpose”). Customer shall protect Confidential Information of the Company from disclosure and unauthorized use in the same manner that it protects its own Confidential Information, but in no event shall such standard of care be less than reasonable care. Customer may disclose Confidential Information of the Company only to its employees who require such information for the Purpose and who are subject to confidentiality obligations at least as protective as those set forth herein. b. Proprietary Information and Advice. (a) All designs, data, and specifications provided by Company are proprietary and may not be disclosed or reused by Customer without the prior written consent of Company; (b) Company assumes no obligation or liability for any advice given by Company, the results obtained, or damages incurred as a result of such advice, and all such advice is given and accepted at Customer’s risk. c. Return. Upon the termination or expiration of a purchase order or this Agreement or upon the request of the Company, the Customer agrees to end all further use of, to immediately return to the Company the original version of, and to delete or destroy all copies of, any and all Confidential Information of the Company.
17. TRADEMARKS. Except as agreed to by Company in writing, Customer agrees not to (a) use Company’s name in any form of publicity; or (b) use, create, register or market, directly or indirectly, in whole or in part, Company’s names, logos, brands, or any other trademarks, or names that are now or may hereafter be owned by Company, as part of Customer’s corporate or business name, as part of an internet domain name, uniform resource locator (URL), or in any way connected with Customer’s business, trade address or other designations. Upon termination of this Agreement or upon the request of company for any reason, any use of Company’s trademarks or names will be immediately discontinued.
18. LIMITED WARRANTY.COMPANY MAKES NO OTHER WARRANTIES EXCEPT THOSE STATED IN COMPANY’S LIMITED WARRANTY IN EFFECT ON THE DATE COMPANY ACCEPTS EACH APPLICABLE PURCHASE ORDER (“LIMITED WARRANTY”). THE LIMITED WARRANTY MAY BE FOUND IN THE APPLICABLE PRICE BOOK AND ON THE ALLEGION CUSTOMER WEBSITE, WHICH TERMS ARE EXPRESSLY INCORPORATED HEREIN BY REFERENCE. COMPANY WILL MAIL CUSTOMER A HARD COPY OF THIS WARRANTY UPON CUSTOMER’S WRITTEN REQUEST. IN THE EVENT THAT CERTAIN DELIVERABLE WARRANTIES ARE NOT FURNISHED BY THE COMPANY TO CUSTOMER, COMPANY WARRANTS ONLY TO CUSTOMER THAT THE DELIVERABLES WILL BE FREE FROM DEFECTS IN MATERIAL AND WORKMANSHIP FOR A PERIOD OF 12 MONTHS FROM THE DATE OF SHIPMENT OF THE DELIVERABLES. COMPANY’S SOLE OBLIGATION UNDER THIS WARRANTY IS LIMITED TO REPAIRING OR REPLACING, AT COMPANY’S OPTION, THE DEFECTIVE DELIVERABLE, PROVIDED WRITTEN NOTICE OF THE DEFECT OR NONCONFORMANCE IS PROVIDED BY CUSTOMER WITHIN 30 DAYS OF DISCOVERY OF THE DEFECT OR NONCONFORMANCE. COMPANY DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, WITH RESPECT TO THE DELIVERABLES, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE. a. Exclusions. The provisions of this Limited Warranty do not apply to Deliverables that: (A) are not the proper size for the application; (B) are not installed in accordance with Company’s published installation instructions; (C) are installed with improper or incorrect parts and/or are used for purposes for which they are not designed or intended; (D) have been repaired or altered without the Company’s prior written consent; (E) have been subjected to misuse, abuse, negligence or accident; (F) have been improperly stored, installed, maintained or operated; (G) have been used in violation of written instructions provided by Company to Customer; (H) have been subjected to improper temperature, humidity, or other environmental conditions, or (I) have been affected by normal wear and tear. In addition, the provisions of this Limited Warranty do not apply to any defects or issues with the design or performance of equipment or products not manufactured by Company, nor does it apply to any code compliance or permit requirements for the assembly, installation, erection or construction of any goods. Company is not responsible for loss or damage resulting from use of Deliverables in conjunction with parts or systems not manufactured by Company. Accessories or products furnished by the Company, but manufactured by others, shall carry whatever warranty the manufacturers have conveyed to the Company and which can be passed to Customer. b. Services. Company warrants that its services will be free from defects in material and workmanship for a period of 12 months from the date of completion of the particular items of service. Company’s sole obligation under this service warranty is limited to repair or reperformance, at its option of the service, provided however, if repair or reperformance is either impractical or impossible, the Company will refund to Customer that portion of the price paid to Company for any defective service, provided written notice of the defect or nonconformance is provided by Customer within 30 days of discovery of the nonconformance. c. Notification. Customer agrees to immediately notify Company in writing if any claim is made against Customer for any damages caused by any modules, parts, products, service or other Deliverables which may be the direct result of any defect in the manufacture of such aforementioned products. Customer agrees to cooperate with Company and its counsel in the defense of such claim and Customer agrees not to settle such claim without Company’s written consent. If Customer fails to notify Company of such claim or fails to cooperate in such defense as aforesaid, then Company shall be discharged from any obligations under this Section and shall have no further liability to Customer. d. Exceptions. The following costs and expenses are not covered by the provisions of these limited warranties: (i) labor costs for the removal and reinstallation of Deliverables or other manufacturer’s products; (ii) shipping and freight expenses required to return Deliverables to Company; (iii) normal maintenance; and (iv) economic losses. In addition, the provisions of this warranty are not applicable to anything other than defects in Company’s material (products only) or workmanship.
19. LIMITATION OF REMEDIES.CUSTOMER’S EXCLUSIVE AND SOLE REMEDY ON ACCOUNT OF, OR IN RESPECT OF, THE FURNISHING OF NON-CONFORMING DELIVERABLES, SHALL BE TO (A) SECURE REPAIR OR REPLACEMENT OF THE PRODUCTS; OR (B) SECURE REPAIR OR RE-PERFORMANCE OF THE SERVICES OR TO OBTAIN A REFUND OF THE PRICE PAID FOR THE DEFECTIVE SERVICE, ALL AT COMPANY’S OPTION. IN NO EVENT WILL THE COMPANY’S MAXIMUM LIABILITY EXCEED THE SELLING PRICE FOR THE DELIVERABLE. THE WARRANTY, OBLIGATIONS AND LIABILITIES OF COMPANY (INCLUDING ITS SUPPLIERS) AND THE RIGHTS AND REMEDIES OF CUSTOMER ARE EXCLUSIVE AND ARE IN LIEU OF AND CUSTOMER HEREBY WAIVES AND RELEASES ALL OTHER WARRANTIES, OBLIGATIONS, REPRESENTATIONS OR LIABILITIES EXPRESS OR IMPLIED ARISING BY LAW, IN CONTRACT, TORT (INCLUDING NEGLIGENCE OR STRICT LIABILITY) OR OTHERWISE, INCLUDING BUT NOT LIMITED TO (I) ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY WARRANTY IMPLIED THROUGH COURSE OF PERFORMANCE, COURSE OF DEALING, OR USAGE OF TRADE OR (II) CLAIMS ARISING OUT OF THE NEGLIGENCE OF COMPANY OR COMPANY’S SUPPLIERS OR (III) ANY OTHER CLAIM ARISING OUT OF, CONNECTED WITH, OR RESULTING FROM THE PERFORMANCE OF COMPANY OR FROM THE DESIGN, MANUFACTURE, SALE, REPAIR, LEASE OR USE OF THE DELIVERABLE, OR ANY COMPONENT THEREOF, DELIVERED OR RENDERED HEREUNDER OR OTHERWISE.
20. INDEMNIFICATION AND LIMITATION OF LIABILITY. a. Customer shall indemnify, defend and hold Company, and its officers, directors, employees, customers, Affiliates, suppliers, users and agents, (collectively the “Indemnitees”) harmless from and against any and all damages, claims, losses, expenses, costs, obligations, liabilities, including without limiting the generality of the foregoing, liabilities for court costs and attorneys’ fees, suffered directly or indirectly by an Indemnitee by reason of, or arising out of any injury, death or loss to any person, or injury to any property (collectively, “Damages”), received or sustained by any person(s) or property, arising out of, occasioned by, attributable or related to i) any breach of any representation or warranty made by Customer, its officers, directors, employees, affiliates, users, agents, representatives or customers to Company or any third party, (ii) any failure by Customer to perform or fulfill any of its covenants, acts and/or omissions to Company or to any third party, or (iii) any litigation, proceeding or claim by any third party relating in any way to the obligations of Customer and/or the Deliverables sold by Company to Customer hereunder. Customer shall not consummate any settlement of any indemnified claim without the Indemnitees’ prior written consent. Customer’s obligation to indemnify Indemnitees will continue in full force and effect notwithstanding the termination or expiration of any order under this Agreement. In any claim against an Indemnitee by an
Terms and Conditions
iv Ives Price Book 3 Effective October 5, 2015 • Rev. 10/15
employee of Customer or any subcontractor or anyone directly or indirectly employed by any of them or anyone for whose acts they may be liable, the indemnification obligations set forth in this Section shall not be limited in any way by or for Customer or any subcontractor under any applicable worker’s compensation act, disability or other employee benefit act, or insurance coverage. This provision shall survive termination of any order or Agreement. IN NO EVENT WILL COMPANY, ITS OFFICERS, DIRECTORS, EMPLOYEES, CUSTOMERS, AFFILIATES, USERS AND AGENTS, (NOR COMPANY’S SUPPLIERS) BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND OR NATURE UNDER ANY CIRCUMSTANCES INCLUDING, BUT NOT LIMITED TO, LOSS OF USE OF THE PRODUCTS, SERVICE INTERRUPTION, LOSS OF PROFITS, LOSS OF REVENUE, LOSS OF INTEREST, LOST GOODWILL, LOSS OF DATA, WORK STOPPAGE, IMPAIRMENT OF OTHER GOODS, LOSS BY REASON OF SHUTDOWN OR NON-OPERATION, INCREASED EXPENSES OF OPERATION, OR CLAIMS OF CUSTOMER’S CUSTOMERS, OR ANY OTHER LOSSES OR DAMAGES ARISING OUT OF ANY LACK OR LOSS OF USE OF THE DELIVERABLES WHETHER BASED ON CONTRACT, WARRANTY, TORT (INCLUDING, BUT NOT LIMITED TO, STRICT LIABILITY OR NEGLIGENCE), PATENT INFRINGEMENT, OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. b) INTELLECTUAL PROPERTY INDEMNITY. Company makes no representation or warranty to the Customer that the Deliverables shall not infringe any intellectual property rights including, without limitations, claims arising from patent, copyright, trademark, trade secret, or other intellectual property infringement. Customer agrees to hold Company harmless from and defend the Company against any such claim of intellectual property infringement, including any Damages resulting from that claim, the cost of complying with any preliminary or permanent injunction, and all other costs of defense (including the attorneys’ fees and costs), in connection with the foregoing.c) To the extent that applicable law does not permit any limitations set out in this Agreement, such limitation shall not be applied or invoked. Nothing in this Agreement will be interpreted to disclaim liability of Company or the Indemnitees for gross negligence or willful misconduct. The limitations of remedy and liability herein shall not be interpreted to affect Company’s obligations, if any, for claims for (i) property damage, (ii) personal injury, or (iii) wrongful death asserted by persons who are not parties to or beneficiaries of this Agreement. Further, the limitations of remedy and liability herein shall not be interpreted to limit Company’s or Customer’s right, if permitted by applicable law, to assert a claim for contribution among joint tortfeasors in connection with a claim by a person who is not a party to this Agreement.
21. CERTIFICATIONS. Certification of Deliverables for compliance with UL and ANSI standards are tested and performed by third-party independent laboratories. Any field modification or alteration of certified Deliverables will void certification and Company is not liable to Customer to certify any modified or altered Deliverable.
22. TERM FOR CLAIMS. NO ACTION ARISING OUT OF ANY CLAIMED BREACH OF THIS AGREEMENT BY COMPANY MAY BE BROUGHT BY CUSTOMER MORE THAN ONE (1) YEAR AFTER THE CAUSE OF ACTION HAS ARISEN.
23. CONSUMER PRODUCTSWITH RESPECT TO “CONSUMER PRODUCTS” AS DEFINED UNDER THE MAGNUSON-MOSS WARRANTY ACT (“MMWA”), THE FOLLOWING STATEMENTS ARE MADE. (A) SOME STATES OR LOCAL LAWS DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU; (B) IF ANY IMPLIED WARRANTY IS PROVIDED UNDER THE MMWA, IT IS LIMITED TO THE DURATION OF THE WARRANTY PROVIDED IN SECTION 18 ABOVE. (C) SOME STATES OR LOCAL LAWS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU; AND (D) THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE OR LOCATION TO LOCATION.
24. FORCE MAJEURE/EXCUSABLE DELAY. Any delay or failure of Company to perform its obligations hereunder will be excused to the extent that it is caused by an event or occurrence beyond Company’s control such as, by way of example and not by way of limitation, acts of God, acts by any governmental authority (whether valid or invalid), governmental laws and regulations not presently in effect, fires, floods, windstorms, explosions, riots, natural disasters, wars, sabotage, accidents, labor problems (including, without limitation, lockouts, strikes, and slowdowns) at Company’s facility, its source plant or their suppliers, inability to obtain power, material, labor equipment, or transportation, or court injunction or order. The delivery date will be extended for a time equal to that of the delay and the schedule for Company’s performance will be deemed adjusted to that effect.
25. ENTIRE AGREEMENT AND AMENDMENT. This Agreement, together with the attachments, exhibits, webpages, or supplements specifically referenced and incorporated herein, constitute the entire agreement between Company and Customer with respect to the matters contained herein and supersede all previous communications, representations, or agreements, either oral or written between Company and Customer. No agreement or understanding varying or expanding this Agreement will be binding upon either party unless it is in writing and signed by a duly authorized representative of each party hereto.
26. CONFLICTS. In the event of any conflict or inconsistency between the terms of any agreement, or any part of an agreement or the various documents (including, but not limited to, electronic documents) between Company and Customer, unless the parties agree otherwise in writing, the various components of the agreements shall be given the following precedence (in descending order of precedence): a) any master agreement or long term agreement between Company and Customer; b) any specific terms, conditions and/or warranties of the individual products or Deliverables; c) the terms and conditions of this Agreement, and d) any purchase order.
27. UNSATISFACTORY CREDIT/TERMINATION FOR INSOLVENCY OR DEFAULT. Customer shall furnish Company with statements evidencing Customer’s financial condition as Company may, from time to time, reasonably request, and shall notify Company immediately of any and all events that may have a material adverse effect on Customer’s business or financial condition. If Company determines, in its sole discretion, that Customer’s financial condition or creditworthiness is inadequate or unsatisfactory, then in addition to Company’s other rights, Company may without liability or penalty, take any of the following actions: (i) modify the payment terms for any outstanding and/or future purchases; (ii) cancel any previously accepted orders; (iii) delay any further shipment of Deliverables to Customer; or (iv) any combination of the above.
Company may immediately terminate an order from Customer by giving written notice to Customer in the event of the happening of any of the following or any other comparable event: (i) insolvency of the Customer; (ii) filing of a petition in bankruptcy by or against the Customer; (iii) appointment of a receiver or trustee for the Customer; (iv) execution of an assignment for the benefit of creditors by the Customer, all of which will allow Company to demand reclamation of all affected orders; (v) Customer ceases or threatens to cease to trade; (vi) Company determines that Customer does not meet or no longer meets the credit requirements of Company or Customer’s credit account is closed; (vii) any Customer violation of law, specifically including, without limitation, those laws set forth in this Agreement.
In the event of termination in accordance with this section, Company will not be obligated to accept any existing or additional orders from Customer and Company will be released from its obligation to deliver under orders accepted prior to such termination. The rejection or termination of any order by Company will not entitle Customer to any termination or severance compensation, or to any payment in respect to any goodwill established by Customer, or render Company liable for damages on account of the loss of prospective profits, or on account of any loss, expenditure, investment or obligation incurred or made by Customer.
No action taken under this Section 27 by Company (nor any failure of Company to act under this Section 27) will constitute a waiver by Company of any of its rights to enforce Customer’s obligations, including the obligation of Customer to make payments as required under this Agreement. Upon termination of any order, all amounts owed by Customer to Company will become immediately due and payable, whether or not otherwise then due or payable.
28. CREDIT RISK ON RESALE OF DELIVERABLES. Customer is responsible for all credit risks with respect to, and for collecting payment for, all Deliverables sold to third parties (including End Users, installers, and/or general contractors) whether or not Customer has made full payment to Company for such Deliverables. The inability of Customer to collect payment for any Deliverable shall not affect Customer’s obligation to pay Company for any Deliverable.
29. GOVERNING LAW; VENUE; AND EXPENSES. Any dispute or claim relating to this Agreement shall be governed by and construed according to the laws of the State of Indiana (excluding its conflict of laws principles); and not by the provisions of the 1980 United Nations Convention on the International Sale of Goods. Any disputes or claims shall be instituted and maintained in the courts of the State of Indiana. Customer consents to the exercise of jurisdiction over it by such courts and agrees that Indiana is not an inconvenient forum for any action arising from or relating to this Agreement. Customer agrees to pay for all expenses (including, but not limited to, collection costs, court costs and attorneys’ fees) incurred by Company in enforcing the obligations of Customer under this Agreement.
30. RELATIONSHIP OF THE PARTIES. Nothing in this Agreement or any other document creates an employment, partnership, joint venture, or agency relationship between Company and Customer, including that of franchisee/franchisor. No party will have any power or authority to enter into any commitment on behalf of or otherwise bind the any other party on any matter. No employee of Customer will be deemed to be an employee of Company. If any provision of this Agreement is deemed to create a franchise relationship or business opportunity between the Parties, then Company may terminate any purchase order or this Agreement or the Parties shall negotiate in good faith to modify this Agreement so as to effect the original intent of the Parties as closely as possible in a mutually acceptable manner in order that the transactions contemplated hereby are consummated as a reseller agreement and not a franchise or business opportunity agreement.
31. SETOFF. Customer does not have the right to setoff or to back charge against any amounts which become payable to Company under this Agreement or otherwise. Company will not accept responsibility for backcharges for the cost of material or labor by Customer or any third party.
32. ELECTRONIC COMMUNICATIONS AND ELECTRONIC SIGNATURES. Both parties expressly agree to electronic transactions and acknowledge that documents they sign electronically will bind them to the same extent as a paper signature. Customer represents and warrants to Company that only employees authorized to bind Customer legally shall electronically sign any document under this Agreement. Customer shall comply with any method of electronic communication/payment processing specified by Company, including electronic funds transfer, pay-on-receipt processes/systems, order transmission, releases, electronic signature, and electronic communication systems, including, without limitation, the use of electronic data interchange (“EDI”) portals. Notwithstanding the foregoing, e-mails, even those containing a signature block of one of Company’s representatives, shall not constitute a signed writing.
33. COMPLIANCE WITH APPLICABLE LAWS. a. General. Company and Customer will comply with all applicable federal, state and municipal laws, regulations, codes, ordinances and orders that pertain to the Deliverables, including but not limited to full compliance with any applicable provisions of The Health Insurance Portability and Accountability Act. Where the Customer is located outside the United States, or where the customer intends to ship the product outside the United States, the Customer shall be responsible for compliance with all U.S. export laws, and for filing all U.S. Electronic Export Information, as applicable. b. The Customer acknowledges and agrees that: (i) it shall not violate applicable laws and regulations in performing its duties under this Agreement; (ii) it does not and shall not engage in any conduct that shall violate any applicable anti-bribery or anti-corruption laws or regulations; (iii) it (and its owners, officers, directors, employees and agents) shall not pay, offer, promise or authorize the payment of, either directly or indirectly, anything of value (including but not limited to cash, gifts and entertainment) to (a) any government official or employee of any government; (b) any official or employee of any department, agency, or instrumentality of a government; (c) any employee of any corporation or entity owned or controlled by a government; (d) any family member of such officials or employees; (e) any political party, party official, or political candidate; or (f) any other persons, owners, officers, directors, employees and agents of any corporation or entity; to improperly or illegally assist in obtaining or retaining business (including but not limited to any contracts, avoidance of duties or reduction of tariffs, reduction of taxes or to obtain money owed, or to obtain regulatory approval) or for the purpose of causing, soliciting or inducing the sale and purchase of the Deliverables by any party, and (iv) it has full knowledge of and will comply with the Company’s Code of Conduct for Business Partners as set forth on the Allegion customer website, WHICH IS HEREBY INCORPORATED BY REFERENCE.
Terms and Conditions
Ives Price Book 3 Effective October 5, 2015 • Rev. 10/15
v
Terms and Conditions
c. The Customer shall indemnify and hold the Company harmless from any claim, demand, expense or cost arising from any breach of this Article. d. The Customer shall permit the Company to conduct an audit or review of the Customer’s financial books and records and business operations at such other times that the Company considers it necessary to confirm compliance with this provision. Such audit may be conducted by representatives of the Company or, at the Company’s sole discretion, by a certified public accounting firm selected by the Company. The Customer shall cooperate with any inquiries from the Company’s Ethics & Compliance Group. e. A violation of this provision constitutes a material breach of this Agreement and the Company may terminate any purchase order or this Agreement immediately, with no opportunity to cure, in accordance with Section 27 of this Agreement. f. Notwithstanding the foregoing provisions of this Section 33, (i) Company is not responsible for obtaining or maintaining any permits for the performance of services or the verification or compliance with any code requirements relative to the performance of services, (ii) to the extent any sale of Deliverables pursuant to this Agreement may require approval of the U.S. Government, Company’s obligations under this Agreement are conditioned upon the grant of such approval and upon compliance by Customer with any restrictions imposed by the U.S. Government in connection with such approval, and (iii) in the event the Deliverables are to be used in a nuclear facility, the Customer shall, prior to such use, arrange for insurance or governmental indemnity protecting Company against liability. The Customer hereby releases and agrees to indemnify Company and its suppliers for any nuclear damage including, but not limited to, loss of use, in any manner arising out of the nuclear incident, whether alleged to be due, in whole or in part by Company or its suppliers. g. No Inducements. Each party represents to each other that neither it nor any person acting on its behalf has, in contravention of any applicable law, given or offered to give or will give or offer to give, any sum of money or other material consideration to any person, directly or indirectly, as an inducement to obtain business hereunder or to influence the granting of licenses or other governmental permissions to enter into this Agreement or perform obligations hereunder. h. Equal Employment Opportunity. Company is a U.S. federal contractor that complies with Executive Order 11246, as amended, and applicable regulations in 41 CFR Parts 60-1 through 60-60, 29 U.S.C. § 793 and applicable regulations in 41 CFR § 60-741; and 38 U.S.C. § 4212 and applicable regulations in 41 CFR Part 60-250 and 60-300. THE FOLLOWING PROVISIONS ARE INCORPORATED HEREIN BY REFERENCE: Executive Order 11246, as amended by Executive Order 13672, and 41 CFR § 60-4.3(a); Executive Order 11701 and 41 CFR §§ 60-250.5(a), 60-300.5; Executive Order 11758 and 41 CFR § 60-741.5(a); U.S. immigration laws, including the L-1 Visa Reform Act of 2004 and the H-1B Visa Reform Act of 2004; and Executive Order 13496. i. Ethical Business Conduct. Customer shall adopt and comply with Company’s Business Partner Code of Conduct which is EXPRESSLY INCORPORATED HEREIN BY REFERENCE.
34. REPRESENTATIONS AND WARRANTIES. Customer represents, warrants and covenants to Company that: (a) it has the right, power, and authority to enter into this Agreement and fully perform its obligations hereunder; (b) it has all necessary rights in and to its respective Content and Marks for use within the scope of this Agreement, including the licenses granted herein; and (c) it complies, and at all times shall comply, with all laws, rules, and regulations in effect that are applicable to its performance under this Agreement, including obtaining all such approvals and/or permits as may be required hereunder.
35. NO THIRD-PARTY BENEFICIARY. Each party is entering into this Agreement solely based on the representations contained herein for its own purposes and not for the benefit of any third party.
36. NOTICES AND CHANGE OF ADDRESS. All notices or other communications under this Agreement shall be in writing and delivered in person, or sent by receipted courier, express mail, e-mail, or postage prepaid certified or registered mail, addressed to the party for whom it is intended, at the addresses set forth in this Agreement. Either party may change its address for notice by giving written notice to the other party. Any notice or other communication shall be deemed given no later than the date actually received. Notice by courier, express mail, certified mail, or registered mail shall be deemed given on the date it is officially recorded as delivered and, in the absence of such record of delivery, it shall be rebuttably presumed to have been delivered on the third Business Day after it was deposited. Notices sent by e-mail require tangible confirmation of receipt from addressee.
37. ASSIGNMENT. Customer may not assign this Agreement without the prior written consent of Company. Company may assign its rights and delegate its duties under this Agreement, without the prior consent of Customer, to an Affiliate, or to a third party in the event of a spin-off, merger, business combination, consolidation or sale of all, or substantially all, of its assets or business that are related to this Agreement. The rights and duties in this Agreement shall bind and inure to the benefit of any such assignee.
38. SEVERABILITY. If any provision of this Agreement is held to be invalid, illegal, or unenforceable under any statute, regulation, ordinance, executive order, or other rule of law, that provision will be deemed severed to the extent necessary to comply with such statute, regulation, ordinance, order, or rule. In the event such provision is deemed severed, the parties will negotiate in good faith to arrive at an alternative arrangement approximating the original business objective of the parties. The remaining terms and conditions of this Agreement will remain in effect.
39. NO IMPLIED WAIVER. The failure of either party at any time to require performance by the other party of any provision of this Agreement will in no way affect the right to require such performance at any time thereafter, nor will the waiver of either party of a breach of any provision of this Agreement constitute a waiver of any succeeding breach of the same or any other provision.
40. MISCELLANEOUS. (a) This Agreement does not make either party the agent or legal representative of the other party. Neither party is authorized to create any obligation on behalf of the other party including, but not limited to, the obligation for payment of any service or warranty obligation hereunder; (b) The rights and remedies herein reserved to Company are cumulative and additional to any other rights and remedies provided at law or equity; (c) The official text of this Agreement is in the English language. If this Agreement is translated into another language, the English text will govern any question with respect to interpretation; (d) The headings in this Agreement are for convenience of reference only and do not affect the meaning of this Agreement in any manner.
DEFINITIONS.Capitalized terms have the meanings set forth in this Section, or in the Section in which they first appear in this Agreement. “Agreement” means these Allegion Terms and Conditions of Sale and Service, together with any applicable Country Supplement or Region Supplement provided by Company, and all of the documents referenced herein or therein.“Affiliate” means any Person that directly or indirectly, through one or more intermediaries, controls, is controlled by, or is under common control with, the Company. The term “control” (including the terms “controlled by” and “under common control with”) means the possession, directly or indirectly, of the power to direct or cause the direction of the management and policies of a Person, whether through the ownership of voting securities, by contract or otherwise. “Business Day” means any day except Saturday, Sunday or any other day on which commercial banks located in the United States are authorized or required by Law to be closed for business. “Company” means Schlage Lock Company, LLC or any subsidiary or affiliate thereof selling products that are part of the Allegion product portfolio. Schlage Lock Company and/or its subsidiary or affiliates will be severally but not jointly liable under the Agreement. “Company Marks” refers to the Marks of Company. “Confidential Information” shall mean any and all information provided by either party to the other party pertaining to the disclosing party’s business. Confidential Information shall include, but not be limited to, any bitting lists, formulae for products, manufacturing processes, production techniques, packaging processes, methods, research materials, ideas, marketing plans and related materials, quality standards, test results and data, apparatus, engineering drawings, contract documents, computer software, hardware, or firmware, business activities information such as financial information, reports, projections, books and records, customer and supplier information, and operations, customer and supplier lists and data, specifications, know how, and other Proprietary Information or Trade Secrets (as defined herein) that either party may furnish to the other party. Confidential Information shall not include information that: (a) is or becomes publicly known if such public knowledge or disclosure is not the result of any act or failure to act on the part of the receiving party; (b) is, at the time of disclosure, already known to the Receiving Party without utilizing the Confidential Information; (c) is information disclosed to the Receiving Party by a third party which is not to the Receiving Party’s knowledge, after inquiry of the third party, under a duty of confidentiality to the Disclosing Party; or (d) is independently developed by the Receiving Party without the use of Confidential Information. The Receiving Party shall have the burden of proof as to prior knowledge and absence of breach. Confidential Information may be furnished in any tangible or intangible form including, but not limited to, writings, drawings, computer and other electronic media, logic diagrams, component specifications, graphs, prototypes, samples, or verbal communications and regardless of whether such information is marked or designated as “confidential.” For the avoidance of doubt, all information, knowledge or data disclosed by Company to Customer, regardless of whether disclosed in written, tangible, oral, visual or other form, including, without limitation, sample products, equipment, software, or other objects or material, provided by Company to Customer, and all information, knowledge or data which was obtained by Customer from visits to Company’s facilities, shall be considered “Confidential Information” under this Agreement. “Content” means all information (including without limitation any text, music, sound, photographs, video, graphics, data or software), in any medium, on a particular Company Web page or Website or in Marketing Materials. “Customer” means the purchaser of Deliverables from Company. “Deliverables” means any good or service or both purchased by Customer from Company under these General Terms and Conditions of Sale and Service. “End Users” means the purchaser that (a) has acquired a Deliverable from Customer for (i) its own and its Affiliate’s/Affiliates’ internal use and not for resale, remarketing or distribution or (ii) incorporation into its own products and (b) is an individual or entity, other than any federal, state or local agency, office or division.“IP” means all intellectual property and industrial property rights comprising or relating to/of the following: (a) Patents; (b) Trademarks; (c) internet domain names, whether or not Trademarks, registered by any authorized private registrar or Governmental Authority, web addresses, web pages, website and URLs; (d) works of authorship, expressions, designs and design registrations, whether or not copyrightable, including copyrights and copyrightable works, software and firmware, application programming interfaces, architecture, files, records, schematics, data, data files, and databases and other specifications and documentation; (e) Trade Secrets; and (f) all other intellectual property and industrial property rights, and all rights, interests and protections that are associated with, equivalent or similar to, or required for the exercise of, any of the foregoing, however arising, in each case whether registered or unregistered and including all registrations and applications for, and renewals or extensions of, such rights or forms of protection pursuant to the Laws of any jurisdiction throughout in any part of the world.“Marketing Materials” means all marketing brochures, buckslips, pamphlets, emails, text, call scripts or other material, whether in printed format, audio or audiovisual format, or in any other format, that contain any (i) Content relating to the Company Deliverables or (ii) Company Marks. “Marks” means collectively the domain names, trademarks, trade names, service marks, trade dress, logos, and the like used or provided by either party for use in connection with this Agreement. “Patents” means all patents (including all reissues, divisionals, provisionals, continuations and continuations-in-part, re-examinations, renewals, substitutions and extensions thereof), patent applications, and other patent rights and any other Governmental Authority-issued indicia of invention ownership (including inventor’s certificates, petty patents and patent utility models). “Person” means a person or entity.“Price Books” mean Company’s current Price Book in effect for the applicable Deliverable being purchased by Customer. “Trade Secrets” means and includes business or technical information of either party, including processes, formulas, devices, techniques, compilations and other material that a party attempts to maintain in secret and that derive commercial value for such party from not being generally known to the public or readily ascertainable through independent development or reverse engineering.
HIN
GES
CON
TIN
UO
US
HIN
GES
PIV
OTS
Num
eric
al1-
059
Num
eric
al59
-437
Num
eric
al43
8-10
21N
umer
ical
1152
-819
0N
umer
ical
820
0-9
340
Ives Price Book 3 Effective October 5, 2015 • Rev. 10/15
Bold pricing indicates item is in stock and available for Fast TrackContact Ives Customer Service for pricing on additional sizes and finishes
vi
How to use this book
Products are shown in four groups; Hinges, Continuous Hinges, Pivots and Architectural Hardware . Each group is organized in numerical order and no longer in alpha/numerical . Particularly in the Architectural Hardware group, the products are organized by the part number regardless of the prefix or suffix . Example WS33X Wall Stop will be in numerical sequence of 33; CS115 Crash Stop numerical sequence 115 .
For convenience there are a few exceptions where an accessory follows the associated product; example, the COR72 Coordinator is followed by MB1 Mounting Bracket .
The service parts section of previous books has been changed . Service parts for many products have been listed with the product . A full list of available service parts may be obtained from the Ives website . You may also contact your local sales representative or Ives customer service for more assistance on the availability of service parts .
Information contained in the list price table:
Model: Column contains model family description and general catalog informationSubstrate: Column contains material substrate information (i .e . aluminum, brass, steel)Model Number: Column contains the model number and additional prefix for other distinguishing features or packaging type . Package type prefixes (C, CGC, SC, SP, SPS) descriptions are as follows: C – CardedCGC – Commercial Grade CardedSC – Schlage Branded CardSP – Slim PackSPS – Schlage Branded Slim Pack
Item Number: Item number field is UPC number or sku number, where available .
Weight: Contains the total weight of product in box quantity . Not all weights shown .
Order Quantity: Contains the minimum order quantity for identified product, if required .
Box Quantity : Number of items in master carton or special package type .
Markings Cartons: Markings (e .g ., door locations, stock reference numbers) on acknowledgements and individual prod-uct cartons will be provided at $2 .00 each net . Products available to mark: Hinges, Continuous Hinges, Pivots, Protection Plates, Coordinators, Flush Bolts .
Ives Price Book 3 Effective October 5, 2015 • Rev. 10/15
Note: Specify BHMA finish code when ordering.Shaded items may require extended lead time .
CON
TIN
UO
US
HIN
GES
PIV
OTS
Num
eric
al1-
059
Num
eric
al59
-437
Num
eric
al43
8-10
21N
umer
ical
1152
-819
0N
umer
ical
820
0-9
340
Ives Price Book 3 Effective October 5, 2015 • Rev. 1/16
Bold pricing indicates item is in stock and available for Fast TrackContact Ives Customer Service for pricing on additional sizes and finishes
14
HIN
GES
STEEL BASED BRASS / STAINLESS BASEDDESCRIPTION SIZE BHMA FINISH LIST BHMA FINISH LIST US REFERENCE BOX CASE NOTES
5BB1 WT
Five KnuckleBall BearingWide Throw
Standard Weight
For use onstandard weight
doors with mediumfrequency usage
5"x8"
(127x206mm)600 $ 49 .40 ---- $ ---- USP 3 .00 24
632 74 .10 605 ---- US3 3 .00 24
633 52 .40 606 ---- US4 3 .00 24
639 55 .70 612 ---- US10 3 .00 24
640 74 .10 613 ---- US10B 3 .00 24
641 74 .10 614 ---- US10A 3 .00 24
643 77 .20 616 ---- US11 3 .00 24
646 77 .20 619 ---- US15 3 .00 24
651 74 .10 625 ---- US26 3 .00 24
652 61 .80 626 ---- US26D 3 .00 24
---- ---- 629 ---- US32 3 .00 24
---- ---- 630 ---- US32D 3 .00 24
Note: Specify BHMA finish code when ordering.Shaded items may require extended lead time .
BAA 5BB1Five Knuckle Ball Bearing
Standard WeightBuild in America (BAA)
Non-removable Pin (NRP)
add $3 .50 List
4 .5"x4 .5"
(114x114mm)
652 $ 10 .60 626 ---- US26D 3 .00 24
---- ---- 630 39 .00 US32D 3 .00 24
BAA 5BB1 HW 4 .5"x4 .5"
(114x114mm)
652 30 .80 626 ---- US26D 3 .00 24
Five KnuckleBall Bearing
Heavy WeightBuild in America (BAA)
Non-removable Pin (NRP)
add $3 .50 List
---- ---- 630 $ 63 .60 US32D 3 24
5"x4 .5"
(127x114mm)
652 35 .40 626 ---- US26D 3 24
---- ---- 630 74 .40 US32D 3 24
BAA 5BB1 HW BSCFive KnuckleBall Bearing
Heavy WeightBuild in America (BAA)
Swing Clear - Beveled Edge
4 .5"
(114mm)
652 67 .20 626 ---- US26D 3 24
Electric Hinges (Listed under UL 634)4-Wire 8-Wire Electrified Hinges4-Wire (TW4 Suffix)8-Wire (TW8 Suffix)Monitor (MON Suffix)Through-Wire with monitor (TW4M Suffix or TW8M)
• Available in 3 and 5 knuckle• One hinge per box, packed with wood
and machine screws• Through-wire hinges cycle tested to
ensure durability• Ives warranty applies-12 months from
date of shipment• Through-wire rated up to 50 volts
AC/DC at 3 .5 ampls (max) continuous, or 16amps (max) pulse 400m sec, minimum time between pulses is 10 seconds
• Monitor up to 30 VDC @ 0.5 amps
STEEL BASED BRASS / STAINLESS BASED
MODEL NO. BOX QTY FULL MORTISE SWING CLEAR FULL MORTISE SWING CLEARALLEGION CONNECT
HINGE ADDITION/MODIFICATION SPECIFY LIST ADD PER HINGENon-Removable Pin NRP Reference each hinge typeRound Corners (specify 1/4" or 5/8" radius) RC 1/4" or RC 5/8" $ 4 .50Security Studs SH 6 .75Hospital Tips HT 8 .75Security Screws Machine Only SEC 21 .00
Not available with security stud hinges.TW not available for 3.5X3.5 hinges, contact technical support. *MON not available for 4X4 or smaller hinges, contact technical support.
Additional Options Available for Most Hinges
Num
erical820
0-9340
Num
erical1152-8190
Num
erical438-10
21N
umerical
59-437N
umerical
1-059
PIVO
TSCO
NTIN
UO
US
HIN
GES
Ives Price Book 3 Effective October 5, 2015 • Rev. 10/15
15
Bold pricing indicates item is in stock and available for Fast TrackContact Ives Customer Service for pricing on additional sizes and finishes
MODEL SUBSTRATE MODEL NUMBER BHMA FINISH WEIGHT ORDER QTY BOX QTY LIST PRICE
1010*Residential Hinge 3.5"
Square Corner
Steel SC3P1010F-605E 632 3 3 $ 18 .80
SC3P1010F-609E 638 3 3 22 .50
SC3P1010F-619E 646 3 3 22 .50
SC3P1010F-716E – 3 3 19 .40
1011*Residential Hinge 3.5"
5/8" Radius Corner
Steel 1011F-605E 632 2 6 .40
1011F-619E 646 2 6 .40
1011F-625E – 2 6 .40
1011F-716E – 2 6 .40
SC3P1011F-605E 632 3 3 18 .80
SC3P1011F-609E 638 3 3 22 .50
SC3P1011F-619E 646 3 3 22 .50
SC3P1011F-620E – 3 3 22 .50
SC3P1011F-716E – 3 3 22 .50
1012*Residential Hinge 3.5"
1/4" Radius Corner
Steel SC3P1012F-605E 632 3 3 18 .80
SC3P1012F-609E 638 3 3 22 .50
SC3P1012F-619E 646 3 3 22 .50
SC3P1012F-716E – 3 3 22 .50
1020*Residential Hinge 4"
Square Corner
Steel SC3P1020F-605E 632 3 3 22 .50
SC3P1020F-609E 638 3 3 24 .20
SC3P1020F-619E 646 3 3 24 .20
SC3P1020F-716E – 3 3 24 .20
1021*Residential Hinge 4"
5/8" Radius Corner
Steel SC3P1021F-619E – 3 3 24 .20
SC3P1021F-620E – 3 3 24 .20
SC3P1021F-716E – 3 3 24 .20
Residential Hinges
*Non rising pin standard. Hinge pin stop not recommended.
HIN
GES
HIN
GES
PIV
OTS
Num
eric
al1-
059
Num
eric
al59
-437
Num
eric
al43
8-10
21N
umer
ical
1152
-819
0N
umer
ical
820
0-9
340
Ives Price Book 3 Effective October 5, 2015 • Rev. 10/15
Bold pricing indicates item is in stock and available for Fast TrackContact Ives Customer Service for pricing on additional sizes and finishes
16
CON
TIN
UO
US
HIN
GES
STEEL BASEDMODEL DESCRIPTION FINISH LENGTH BHMA FINISH LIST NOTES
600UL Listed
600Concealed Hinge
1/8" InsetNon Handed
USP 83" 600 $257 .60
85" 600 314 .60
95" 600 314 .60
120" 600 388 .80
602UL Listed
602Full SurfaceFlush Mount
Handed when cut or modified
USP 83" 600 289 .60
85" 600 328 .30
95" 600 328 .30
120" 600 442 .30
611UL Listed
611Swing Clear
No Inset, Handed when cut or modified
Built in Edge Guard
USP 83" 600 454 .90
85" 600 500 .60
95" 600 500 .60
120" 600 580 .40
700UL Listed
700Concealed Hinge
1/8" InsetNon Handed
US32D 83" 630 456 .10
85" 630 528 .00
95" 630 528 .00
120" 630 645 .20
702UL Listed
702Full SurfaceFlush Mount
Handed when cut or modified
US32D 83" 630 528 .00
85" 630 608 .90
95" 630 608 .90
120" 630 860 .80
705UL Listed
705Concealed Hinge
Handed when cut or modifiedAdjusta-Stud Fasteners
US32D 83" 630 595 .20
85" 630 670 .40
95" 630 670 .40
120" 630 818 .80
711UL Listed
711Swing Clear
Flush MountedSurface Hinge
No Inset, Handed when cut or modified
Built in Edge Guard
US32D 83" 630 511 .90
85" 630 587 .10
95" 630 587 .10
120" 630 736 .40
715UL Listed
715Concealed HingeFlush Mounted,
Half WrapHanded when cut or modified
Built in Edge Guard
US32D 83" 630 555 .20
85" 630 627 .00
95" 630 627 .00
120" 630 777 .50
Num
erical820
0-9340
Num
erical1152-8190
Num
erical438-10
21N
umerical
59-437N
umerical
1-059
PIVO
TSH
INGES
Ives Price Book 3 Effective October 5, 2015 • Rev. 1/16
17
Bold pricing indicates item is in stock and available for Fast TrackContact Ives Customer Service for pricing on additional sizes and finishes
Custom painting Contact customer service for pricing and color approval . Additional lead time up to 6 weeks may be needed . Hinges less than 12 flate rate $900, for Tiger/Drylac paint, $75 for each hinge greater than 12 .
TWP Thru Wire replacement panel (for 700 CS Series
Only)
For use with 83" - 120"
- - - 737 .40 - - -
CS Series Continious Hinges - Additional Offering
Custom ProcessingCustom Cut to Length (All lengths = 13" from each end, TWP top only) $32 List add per hinge
Custom Painting - Drylac $75 Contact customer service for pricing and color approval .
Additional lead time up to 6 weeks may be needed . Hinges
less than 12 flate rate $900, for Tiger/Drylac paint , $75 for
each hinge greater than 12 .
Dutch Door Preparation N/A List add per hinge
Hospital Tips N/A List add per hinge
Electric ModificationEPT Cut Outs (700CS, 715CS) $89 List add per hinge
TW8- Thru Wire N/A List add per hinge
Quick Connnectors $40 List add per hinge (Must add to the TWP panel list price)
Optional Screw Packs Hollow Metal Security Scews $35 List add per hinge
Wood Scews $20 List add per pack
Num
erical820
0-9340
Num
erical1152-8190
Num
erical438-10
21N
umerical
59-437N
umerical
1-059
PIVO
TSH
INGES
Ives Price Book 3 Effective October 5, 2015 • Rev. 10/15
19
Bold pricing indicates item is in stock and available for Fast TrackContact Ives Customer Service for pricing on additional sizes and finishes
Aluminum BasedMODEL DESCRIPTION FINISH LENGTH BHMA FINISH LIST NOTES
045HDUL Listed
045 Heavy DutyHalf Surface
1/32" InsetFrame leaf 1-9/16"
Handed when cut or modified
US28 83" 628 $ 372 .90
85" 628 372 .90
95" 628 457 .70
120" 628 682 .00
313AN 83" 710 497 .30
85" 710 497 .30
95" 710 612 .60
120" 710 911 .00
046HDUL Listed
046 Heavy DutyHalf Surface
1/32" InsetFrame leaf 1-15/16"
Handed when cut or modified
US28 83" 628 402 .10
85" 628 402 .10
95" 628 491 .60
120" 628 734 .40
313AN 83" 710 526 .30
85" 710 526 .30
95" 710 654 .30
120" 710 972 .60
053HDUL Listed
053 Heavy DutyHalf Surface
1/32" InsetFrame leaf 1-9/16"
Handed when cut or modified
US28 83" 628 259 .20
85" 628 259 .20
95" 628 319 .50
120" 628 488 .20
313AN 83" 710 321 .90
85" 710 321 .90
95" 710 385 .70
120" 710 652 .00
054HDUL Listed
054 Heavy DutyHalf Surface
1/32" Inset, Non HandedFrame leaf 1-15/16"
US28 83" 628 269 .50
85" 628 269 .50
95" 628 329 .90
120" 628 507 .70
313AN 83" 710 328 .80
85" 710 328 .80
95" 710 390 .50
120" 710 655 .40
112HDUL Listed
112 Heavy DutyFull Mortise
No Inset, Non HandedFrame leaf 1-9/16"
US28 83" 628 155 .70
85" 628 155 .70
95" 628 194 .10
120" 628 310 .20
313AN 83" 710 201 .00
85" 710 201 .00
95" 710 251 .00
120" 710 405 .50
157XYUL Listed
157XY Heavy DutyAdjustable Full Surface
1/16" InsetHanded when cut or modified
US28 83" 628 241 .10
95" 628 301 .30
119" 628 512 .20
313AN 83" 710 289 .20
95" 710 361 .60
119" 710 565 .80
Continuous Geared Hinges
CON
TINU
OU
SH
INGES
HIN
GES
PIV
OTS
Num
eric
al1-
059
Num
eric
al59
-437
Num
eric
al43
8-10
21N
umer
ical
1152
-819
0N
umer
ical
820
0-9
340
Bold pricing indicates item is in stock and available for Fast TrackContact Ives Customer Service for pricing on additional sizes and finishes
20 Ives Price Book 3 Effective October 5, 2015 • Rev. 1/16
CON
TIN
UO
US
HIN
GES
Geared Hinges - Additional Offerings Custom Processing* Custom cut to length $18 .00 List add per hinge
Custom painting and anodized colors Contact customer service for pricing and color approval . Additional lead time up to
6 weeks may be needed . Hinges less than 12 flate rate $900, for Tiger/Drylac paint, $75 for each hinge greater than 12 . * Return Policy - requires prior approval, consult factory Hospital Tip (HT) $110 .00 List price Electrical Modifications Electrical Power Transfer (EPT) prep $95 .00 List add per hinge Electric Through-Wire (TW8 Standard) $312 .00 List add per hinge
Allegion Connect (CON) $41 .60 List Add Per Hinge (Must order with TW8 and add TW8 CON List Adder) Through Wire Panel (TWP) option $485 .00 List price(Available for 112 and 224 models and lengths <= 95" )112TWP Panel Service Kit $225 .00 List price (Use 840737-28 for US28, 840737-42 for 313AN)224TWP Panel Service Kit $225 .00 List price (Use 840738-28 for US28, 840738-42 for 313AN) 6' Power Cable Kit for AL Geared TW8 and TWP $320 .00 List price (Contains LH & RH cable) - 840738-00 Optional Screw Packs Security Screws $29 .50 List add per hingeWood Screws $17 .50 Per pack Thread Forming Screws $17 .50 Per pack
No Charge Adds: 1/2 wood / 1/2 Self drilling/Self tapping Specify TEK/WD1/2 wood / 1/2 machine Specify HWHMThread Forming Screws, Specify HM (recommended for grouted frames) Pilot holes required
No charge adds must be specified with original order.
Aluminum BasedMODEL DESCRIPTION FINISH LENGTH BHMA FINISH LIST NOTES
210HDUL Listed
210 Heavy DutyFull SurfaceSwing Clear
1/32" InsetNon Handed
US28 83" 628 $ 230 .00
85" 628 230 .40
95" 628 282 .40
120" 628 483 .30
313AN 83" 710 273 .00
85" 710 273 .00
95" 710 337 .10
120" 710 532 .30
224HDUL Listed
224 Heavy DutyFull Mortise
1/16" InsetNon Handed
US28 83" 628 166 .20
85" 628 166 .20
95" 628 204 .60
120" 628 321 .90
313AN 83" 710 206 .90
85" 710 206 .90
95" 710 262 .70
120" 710 412 .60
Continuous Geared Hinges
Num
erical820
0-9340
Num
erical1152-8190
Num
erical438-10
21N
umerical
59-437N
umerical
1-059
CON
TINU
OU
SH
INGES
21
Bold pricing indicates item is in stock and available for Fast TrackContact Ives Customer Service for pricing on additional sizes and finishes
HIN
GESPIV
OTS
Ives Price Book 3 Effective October 5, 2015 • Rev. 1/16
* Fire rated models US32 and US32D (stainless), all others US26 and US26D (brass)
Suffix DescriptionsBTM - Bottom OnlyF - Fire RatedINT - Intermediate Pivot OnlyPT - Power Transfer, TW4 standard, TW* consult Factory for lead time .SET - Top and Bottom PivotTOP - Top OnlyV - Vertical Side Mount
(Weather Resistant) WP bearings available for 7215 26D and 7215F 32D bottom pivots at $60 list add . Consult factory for lead time .
Num
erical820
0-9340
Num
erical1152-8190
Num
erical438-10
21N
umerical
59-437PIV
OTS
CON
TINU
OU
SH
INGES
HIN
GES
23
Bold pricing indicates item is in stock and available for Fast TrackContact Ives Customer Service for pricing on additional sizes and finishes
Ives Price Book 3 Effective October 5, 2015 • Rev. 10/15
MODEL SUBSTRATEMODEL
NUMBERBHMA FINISH WEIGHT
MUST BE ORDERED IN
MULTIPLE QTYMULTIPLE
QTYPACKED PER BOX
LIST PRICE
EACH PACKAGE
CB1Carry Bar w/Sex Bolts
Steel CB1 USP 600 – – – – $ 28 .20 –
CB1 US3 605 – – – – 43 .10 –
CB1 US4 606 – – – – 43 .10 –
CB1 US10 612 – – – – 43 .10 –
CB1 US10B 613 – – – – 43 .10 –
CB1 US26 625 – – – – 43 .10 –
CB1 US26D 626 – – – – 43 .10 –
CB1 SPBLK 693 – – – – 28 .20 –
DP1Dust Proof Strike
Threshold Only
Brass DP1 US3 605 – – 1 – 23 .50 –
DP1 US4 606 – – 1 – 23 .50 –
DP1 US10 612 – – 1 – 23 .50 –
DP1 US10B 613 – – 1 – 23 .50 –
DP1 US26 625 – – 1 – 23 .50 –
DP1 US26D 626 – – 1 – 23 .50 –
LG1Lock Guard
with Security Pin Frame
Steel LG1 USP 600 – – 1 – 18 .90 –
LG1 US2G 603 – – 1 – 15 .40 –
LG1 SP313 695 – – 1 – 17 .80 –
Brass LG1 US4 606 – – 1 – 39 .30 –
LG1 US10 612 – – 1 – 39 .30 –
Stainless LG1 US32D 630 – – 1 – 35 .70 –
MB1Mounting Bracket
See Page 28
DP2Dust Proof Strike
Floor and /or Threshold
Brass DP2 US3 605 – – 1 – 29 .70 –
DP2 US4 606 – – 1 – 29 .70 –
DP2 US10 612 – – 1 – 29 .70 –
DP2 US10B 613 – – 1 – 29 .70 –
DP2 US26 625 – – 1 – 29 .70 –
DP2 US26D 626 – – 1 – 29 .70 –
MB2Mounting Bracket
See Page 28
2Elbow Cabinet Catch
Aluminum 2A3 666 0 .9 – 1 20 3 .60 –
2A5 – 0 .9 – 1 20 4 .00 –
2A14 669 0 .9 – 1 20 4 .00 –
2A15 670 0 .9 – 1 20 4 .00 –
2A92 673 0 .9 – 1 20 3 .60 –
2A-716 – 0 .9 – 1 20 4 .00 –
SP2A3 666 37 .5 Yes 25 25 – 91 .00
SP2A14 669 37 .5 Yes 25 25 – 98 .80
SP2A92 673 37 .5 Yes 25 25 – 91 .00
MB3Mounting Bracket
See Page 28
LG7Lock Guard
Stainless LG7 US32D 630 – – 1 – 35 .70 –
COR7GCoordinatorGravity Arm
7" armUL Listed
Brass COR7G US3 605 – – 1 – 72 .90 –
COR7G US4 606 – – 1 – 72 .90 –
COR7G US10 612 – – 1 – 72 .90 –
COR7G US10B 613 – – 1 – 72 .90 –
COR7G US26 625 – – 1 – 98 .30 –
COR7G US26D 626 – – 1 – 60 .60 –
Num
erical1-0
59
HIN
GES
CON
TIN
UO
US
HIN
GES
PIV
OTS
Num
eric
al59
-437
Num
eric
al43
8-10
21N
umer
ical
1152
-819
0N
umer
ical
820
0-9
340
Ives Price Book 3 Effective October 5, 2015 • Rev. 10/15
Bold pricing indicates item is in stock and available for Fast Track
24
Num
eric
al1-
059
MODEL SUBSTRATE MODEL NUMBERBHMA FINISH WEIGHT
MUST BE ORDERED IN
MULTIPLE QTYMULTIPLE
QTYPACKED PER BOX
LIST PRICE
EACH PACKAGE
07Window Lock
Aluminum 07A3 666 1 .7 – 1 20 $ 2 .40 –
07A10B 703 1 .7 – 1 20 2 .70 –
07A14 669 1 .7 – 1 20 2 .70 –
07A15 670 1 .7 – 1 20 2 .70 –
07A92 673 1 .7 – 1 20 2 .40 –
07A-716 – 1 .7 – 1 20 2 .70 –
07A-BLK – 1 .7 – 1 20 3 .60 –
07A-W – 1 .7 – 1 20 3 .60 –
SP07A3 666 65 .0 Yes 25 25 – 61 .20
SP07A5 – 65 .0 Yes 25 25 – 89 .80
SP07A14 669 65 .0 Yes 25 25 – 69 .00
SP07A92 673 65 .0 Yes 25 25 – 61 .20
SP07A-W – 52 .0 Yes 20 20 – 71 .80
Brass 07B3 605 2 .3 – 1 10 14 .90 –
07B15 619 2 .3 – 1 10 18 .70 –
07B26 625 2 .3 – 1 10 18 .10 –
07B26D 626 2 .3 – 1 10 18 .10 –
07B-716 – 2 .6 – 1 10 18 .10 –
SPS07B-605 605 52 .0 Yes 20 20 – 372 .40
SPS07B-609 609 52 .0 Yes 20 20 – 372 .40
SPS07B-619 619 52 .0 Yes 20 20 – 372 .40
SPS07B-620 620 52 .0 Yes 20 20 – 372 .40
SPS07B-716 – 52 .0 Yes 20 20 – 372 .40
COR9GCoordinatorGravity Arm
9" armUL Listed
Brass COR9G US3 605 – – 1 – 82 .40 –
COR9G US4 606 – – 1 – 82 .40 –
COR9G US10 612 – – 1 – 82 .40 –
COR9G US10B 613 – – 1 – 82 .40 –
COR9G US26 625 – – 1 – 98 .30 –
COR9G US26D 626 – – 1 – 69 .40 –
FS9Floor Stop
Brass FS9 US3 605 – – 1 – 167 .70 –
FS9 US4 606 – – 1 – 167 .70 –
FS9 US10 612 – – 1 – 167 .70 –
FS9 US10B 613 – – 1 – 167 .70 –
FS9 US26 625 – – 1 – 167 .70 –
FS9 US26D 626 – – 1 – 143 .70 –
LG10Lock Guard
Stainless LG10 US32D 630 – – 1 – 33 .30 –
Steel LG10 USP 600 – – 1 – 22 .60 –
CL11Cabinet Latch
Brass CL11 US3 605 – – 1 – 36 .40 –
CL11 US4 606 – – 1 – 28 .70 –
CL11 US10 612 – – 1 – 28 .70 –
CL11 US26D 626 – – 1 – 28 .70 –
LG11Lock Guard
Stainless LG11 US32D RH 630 – – 1 – 39 .30 –
LG11 US32D LH 630 – – 1 – 39 .30 –
Steel LG11 SP313 RH 695 – – 1 – 29 .70 –
LG11 SP313 LH 695 – – 1 – 29 .70 –
WS11Wall Stop for
Drywall Mounting
Brass WS11 US3 605 – – 1 – 37 .30 –
WS11 US4 606 – – 1 – 37 .30 –
WS11 US10 612 – – 1 – 37 .30 –
WS11 US10B 613 – – 1 – 37 .30 –
WS11 US26 625 – – 1 – 37 .30 –
WS11 US26D 626 – – 1 – 36 .30 –
Num
erical820
0-9340
Num
erical1152-8190
Num
erical438-10
21N
umerical
59-437PIV
OTS
CON
TINU
OU
SH
INGES
HIN
GES
Ives Price Book 3 Effective October 5, 2015 • Rev. 10/15
25
Bold pricing indicates item is in stock and available for Fast Track
MODEL SUBSTRATE MODEL NUMBERBHMA FINISH WEIGHT
MUST BE ORDERED IN
MULTIPLE QTYMULTIPLE
QTYPACKED PER BOX
LIST PRICE
EACH PACKAGE
WS11XWall Stop for
Masonry Mounting
Brass WS11X US3 605 – – 1 – $ 39 .70 –
WS11X US4 606 – – 1 – 39 .70 –
WS11X US10 612 – – 1 – 39 .70 –
WS11X US10B 613 – – 1 – 39 .70 –
WS11X US26 625 – – 1 – 39 .70 –
WS11X US26D 626 – – 1 – 38 .50 –
CL12Cabinet Latch
Brass CL12 US3 605 – – 1 – 43 .60 –
CL12 US4 606 – – 1 – 38 .60 –
CL12 US10 612 – – 1 – 38 .60 –
CL12 US26D 626 – – 1 – 38 .60 –
LG12Lock Guard
Stainless LG12 US32D 630 – – 1 – 31 .00 –
Steel LG12 USP 600 – – 1 – 22 .60 –
FS13Floor Dome Stop
1" height
Brass FS13 US3 605 – – 1 – 6 .70 –
FS13 US4 606 – – 1 – 8 .00 –
FS13 US10 612 – – 1 – 8 .10 –
FS13 US10B 613 – – 1 – 8 .10 –
FS13 US26 625 – – 1 – 8 .00 –
FS13 US26D 626 – – 1 – 6 .70 –
LG13Lock Guard
Stainless LG13 US32D 630 – – 1 – 29 .70 –
Steel LG13 USP 600 – – 1 – 19 .60 –
CL14Cabinet Latch
Brass CL14 US3 605 – – 1 – 38 .60 –
CL14 US4 606 – – 1 – 32 .30 –
CL14 US10 612 – – 1 – 32 .30 –
CL14 US26D 626 – – 1 – 32 .30 –
LG14Lock Guard
Stainless LG14 US32D 630 – – 1 – 48 .80 –
FS17Floor Dome Stop
1-11/32" height
Brass FS17 US3 605 – – 1 – 7 .50 –
FS17 US4 606 – – 1 – 9 .00 –
FS17 US10 612 – – 1 – 9 .20 –
FS17 US10B 613 – – 1 – 9 .20 –
FS17 US26 625 – – 1 – 9 .00 –
FS17 US26D 626 – – 1 – 7 .50 –
R14Riser
For FS13 and FS17Dome Stops 5/16" Height
Steel R14 US3 605 – – 1 – 5 .70 –
R14 US4 606 – – 1 – 5 .70 –
R14 US10 612 – – 1 – 6 .30 –
R14 US10B 613 – – 1 – 6 .30 –
R14 US26 625 – – 1 – 6 .30 –
R14 US26D 626 – – 1 – 7 .40 –
AS18Applied Stop
Brass AS18 US3 605 – – 1 – 46 .10 –
AS18 US4 606 – – 1 – 42 .40 –
AS18 US10 612 – – 1 – 42 .40 –
AS18 US10B 613 – – 1 – 46 .10 –
AS18 US26 625 – – 1 – 46 .10 –
AS18 US26D 626 – – 1 – 46 .10 –
FS18Security Floor or Wall Stop
Steel/ FS18S – – – 1 – 10 .00 –
Rubber FS18L – – – 1 – 14 .00 –
FL20Filler Bar
See page 28
WS20Manual Wall Stop
and Holder forDrywall Mounting
Brass WS20 US3 605 – – 1 – 67 .50 –
WS20 US4 606 – – 1 – 67 .50 –
WS20 US10 612 – – 1 – 67 .50 –
WS20 US10B 613 – – 1 – 67 .50 –
WS20 US26 625 – – 1 – 67 .50 –
WS20 US26D 626 – – 1 – 56 .70 –
Aluminum WS20 US28 628 – – 1 – 54 .00 –
Num
erical1-0
59
HIN
GES
CON
TIN
UO
US
HIN
GES
PIV
OTS
Num
eric
al59
-437
Num
eric
al43
8-10
21N
umer
ical
1152
-819
0N
umer
ical
820
0-9
340
Ives Price Book 3 Effective October 5, 2015 • Rev. 10/15
Bold pricing indicates item is in stock and available for Fast Track
26
MODEL SUBSTRATE MODEL NUMBERBHMA FINISH WEIGHT
MUST BE ORDERED IN
MULTIPLE QTYMULTIPLE
QTYPACKED PER BOX
LIST PRICE
EACH PACKAGE
WS20XManual Wall Stop
and Holder forMasonry Mounting
Brass WS20X US3 605 – – 1 – $69 .80 –
WS20X US4 606 – – 1 – 69 .80 –
WS20X US10 612 – – 1 – 69 .80 –
WS20X US10B 613 – – 1 – 69 .80 –
WS20X US26 625 – – 1 – 69 .80 –
WS20X US26D 626 – – 1 – 60 .30 –
Aluminum WS20X US28 628 – – 1 – 57 .50 –
CL21/21ABall Catch
4 Way
Brass CL21 US26D 626 – – 1 – 39 .90 –
CL21A US3 605 – – 1 – 42 .40 –
CL21A US4 606 – – 1 – 28 .70 –
CL21A US10 612 – – 1 – 28 .70 –
CL21A US26 625 – – 1 – 42 .40 –
CL21A US26D 626 – – 1 – 31 .20 –
CL22Ball Catch
3 Way
Brass CL22 US3 605 – – 1 – 24 .90 –
CL22 US4 606 – – 1 – 17 .50 –
CL22 US10 612 – – 1 – 17 .50 –
CL22 US26 625 – – 1 – 24 .90 –
CL22 US26D 626 – – 1 – 21 .10 –
22Flush Pull
Brass 22B3 605 1 .1 – 1 20 2 .80 –
22B5 609 2 .0 – 1 20 3 .20 –
22B10B 613 1 .3 – 1 20 3 .20 –
22B15 619 1 .6 – 1 20 3 .10 –
22B26 625 1 .6 – 1 20 3 .20 –
22B26D 626 1 .1 – 1 20 3 .20 –
SP22B3 605 50 .0 Yes 25 25 – 71 .20
25Screen Door Pull
Aluminum 25A3 666 1 .2 – 1 20 1 .60 –
25A92 673 1 .2 – 1 20 1 .60 –
25A-BLK – 1 .2 – 1 20 2 .30 –
25A-W – 1 .2 – 1 20 2 .30 –
SP25A3 666 30 .0 Yes 25 25 – 39 .60
SP25A92 673 30 .0 Yes 25 25 – 39 .60
026Bar Window Lift
Aluminum 026A3 666 1 .9 – 1 10 1 .70 –
026A5 – 1 .1 – 1 10 2 .20 –
026A14 669 1 .8 – 1 10 2 .20 –
026A15 670 1 .9 – 1 10 2 .20 –
026A92 673 1 .1 – 1 10 1 .70 –
026A-716 – 1 .1 – 1 10 2 .20 –
026A-BLK – 1 .4 – 1 10 2 .60 –
026A-W – 1 .4 – 1 10 2 .60 –
SP026A3 666 45 .0 Yes 25 25 – 42 .20
SP026A5 – 45 .0 Yes 25 25 – 55 .40
SP026A14 669 45 .0 Yes 25 25 – 55 .40
SP026A92 673 45 .0 Yes 25 25 – 42 .20
Continued on next page. SP026A-W – – Yes 20 20 – 52 .80
Num
eric
al1-
059
Num
erical820
0-9340
Num
erical1152-8190
Num
erical438-10
21N
umerical
59-437PIV
OTS
CON
TINU
OU
SH
INGES
HIN
GES
27
Bold pricing indicates item is in stock and available for Fast Track
Ives Price Book 3 Effective October 5, 2015 • Rev . 10/15
Num
erical1-0
59
MODEL SUBSTRATE MODEL NUMBERBHMA FINISH WEIGHT
MUST BE ORDERED IN
MULTIPLE QTYMULTIPLE
QTYPACKED PER BOX
LIST PRICE
EACH PACKAGE
Continued from previous page.
026Bar Window Lift
Brass 026B3 605 – – 1 10 $ 7 .70
026B5 609 – – 1 10 9 .30
026B15 619 – – 1 10 9 .50
026B26 625 – – 1 10 9 .50
026B26D 626 – – 1 10 9 .30
026B-716 – – – 1 10 9 .50
SP026B26 625 – Yes 10 10 – 94 .60
SPS026B-605 605 – Yes 20 20 – 158 .10
SPS026B-609 609 – Yes 20 20 – 189 .30
SPS026B-619 619 – Yes 20 20 – 189 .30
SPS026B-620 620 – Yes 20 20 – 189 .30
SPS026B-716 – – Yes 20 20 – 189 .30
RL30Nylon Roller
Brass RL30 US3 605 – – 1 – 61 .30 –
RL30 US4 606 – – 1 – 52 .10 –
RL30 US10 612 – – 1 – 54 .20 –
RL30 US10B 613 – – 1 – 63 .40 –
RL30 US26 625 – – 1 – 61 .30 –
RL30 US26D 626 – – 1 – 57 .80 –
RL30ANylon Rollerw/ASA Stike
Brass RL30-A US3 605 – – 1 – 68 .60 –
RL30-A US4 606 – – 1 – 59 .50 –
RL30-A US10 612 – – 1 – 61 .90 –
RL30-A US10B 613 – – 1 – 71 .10 –
RL30-A US26 625 – – 1 – 68 .60 –
RL30-A US26D 626 – – 1 – 65 .20 –
FB31Automatic Flush Bolts,
Metal DoorsUL 3 Hour
Top and Bottom BoltP=Pair
T=Top Bolt OnlyB=Bottom Bolt Only
Optional Rod Lengths Available
18", 24", 36", 48"4 .30 List Add
Steel FB31P-12-MD US3 605 – – 1 – 168 .00 –
FB31P-12-MD US4 606 – – 1 – 168 .00 –
FB31P-12-MD US10 612 – – 1 – 168 .00 –
FB31P-12-MD US10B 613 – – 1 – 168 .00 –
Stainless FB31P-12-MD US32 629 – – 1 – 168 .00 –
FB31P-12-MD US32D 630 – – 1 – 168 .00 –
Brass FB31T-12-MD US3 605 – – 1 – 88 .60 –
FB31T-12-MD US4 606 – – 1 – 88 .60 –
FB31T-12-MD US10 612 – – 1 – 88 .60 –
FB31T-12 -MD US10B 613 – – 1 – 88 .60 –
Stainless FB31T-12-MD US32 629 – – 1 – 88 .60 –
FB31T-12-MD US32D 630 – – 1 – 88 .60 –
Brass FB31B-12-MD US3 605 – – 1 – 88 .60 –
FB31B-12-MD US4 606 – – 1 – 88 .60 –
FB31B12-MD US10 612 – – 1 – 88 .60 –
FB31B-12-MD US10B 613 – – 1 – 88 .60 –
Stainless FB31B-12-MD US32 629 – – 1 – 88 .60 –
FB31B-12-MD US32D 630 – – 1 – 88 .60 –
COR32*Door Coordinator
32" Channel LengthUL Listed
*See note at page bottom for door prep charges .
Aluminum COR32 US28 628 – – 1 – 134 .40 –
COR32 315AN 711 – – 1 – 175 .60 –
COR32 US26D 713 – – 1 – 260 .30 –
COR32 US28w/FL20 628 – – 1 – 147 .10 –
COR42*Door Coordinator
42" Channel LengthUL Listed
*See note at page bottom for door prep charges .
Aluminum COR42 US28 628 – – 1 – 144 .70 –
COR42 315AN 711 – – 1 – 187 .00 –
COR42 US26D 713 – – 1 – 276 .60 –
COR42 US28w/FL20 628 – – 1 – 157 .20 –
COR42 US28w/FL32 628 – – 1 – 159 .90 –
COR42 US28w/FL44 628 – – 1 – 163 .70 –
* Special factory preparation for use with vertical rod exit devices available. Add $110.10 List.
HIN
GES
CON
TIN
UO
US
HIN
GES
PIV
OTS
Num
eric
al59
-437
Num
eric
al43
8-10
21N
umer
ical
1152
-819
0N
umer
ical
820
0-9
340
Bold pricing indicates item is in stock and available for Fast Track
28 Ives Price Book 3 Effective October 5, 2015 • Rev . 10/15
* Special factory preparation for use with vertical rod exit devices available. Add $110.10 List.
Num
eric
al1-
059
MODEL SUBSTRATE MODEL NUMBERBHMA FINISH WEIGHT
MUST BE ORDERED IN
MULTIPLE QTYMULTIPLE
QTYPACKED PER BOX
LIST PRICE
EACH PACKAGE
COR52*Door Coordinator
52" Channel LengthUL Listed
*See note at page bottom for door prep charges .
Aluminum COR52 US28 628 – – 1 – $ 136 .90 –
COR52 315AN 711 – – 1 – 177 .70 –
COR52 US26D 713 – – 1 – 280 .60 –
COR52 US28w/FL20 628 – – 1 – 149 .60 –
COR52 US28w/FL32 628 – – 1 – 152 .10 –
COR52 US28w/FL44 628 – – 1 – 155 .90 –
COR60*Door Coordinator
60" Channel LengthUL Listed
*See note at page bottom for door prep charges .
Aluminum COR60 US28 628 – – 1 – 159 .70 –
COR60 315AN 711 – – 1 – 203 .50 –
COR60 US26D 713 – – 1 – 295 .50 –
COR60 US28w/FL20 628 – – 1 – 172 .40 –
COR60 US28w/FL32 628 – – 1 – 174 .90 –
COR60 US28w/FL44 628 – – 1 – 178 .70 –
COR72*Door Coordinator
72" Channel LengthUL Listed
*See note at page bottom for door prep charges .
Aluminum COR72 US28 628 – – 1 – 181 .70 –
COR72 315AN 711 – – 1 – 245 .20 –
COR72 US26D 713 – – 1 – 361 .40 –
COR72 US28w/FL20 628 – – 1 – 194 .40 –
COR72 US28w/FL32 628 – – 1 – 196 .90 –
COR72 US28w/FL44 628 – – 1 – 200 .70 –
FL20Filler Bar 20" Length
Aluminum FL20 US28 628 – – 1 – 12 .70 –
FL20 315AN 711 – – 1 – 40 .60 –
FL20 US26D 713 – – 1 – 59 .50 –
FL32Filler Bar
32" Length
Aluminum FL32 US28 628 – – 1 – 15 .20 –
FL32 315AN 711 – – 1 – 43 .00 –
FL32 US26D 713 – – 1 – 64 .50 –
FL44Filler Bar
44" Length
Aluminum FL44 US28 628 – – 1 – 19 .00 –
FL44 315AN 711 – – 1 – 46 .70 –
FL44 US26D 713 – – 1 – 75 .80 –
MB1Mounting Bracket
Stop Widths Over 2-1/2"
Aluminum MB1 USP 600 – – 1 – 17 .70 –
MB1 SP28 689 – – 1 – 25 .30 –
MB1 SPBLK 622 – – 1 – 25 .30 –
MB1F & MB1VMounting Bracket
Stop Widths 1-1/2" - 2-1/4"
Steel MB1F USP 600 – – 1 – 45 .80 –
MB1F SP28 689 – – 1 – 45 .80 –
MB1F SPBLK 622 – – 1 – 45 .80 –
MB1V USP 600 – – 1 – 72 .80 –
MB1V SP28 689 – – 1 – 72 .80 –
MB1V SPBLK 622 – – 1 – 72 .80 –
MB2Mounting Bracket
Stop Widths Up to 2-1/2"
Aluminum MB2 USP 600 – – 1 – 20 .90 –
MB2 SP28 689 – – 1 – 28 .60 –
MB2 SPBLK 622 – – 1 – 28 .60 –
MB2F & MB2VMounting Bracket
Stop Widths 2-7/8" - 3-1/4"
Steel MB2F USP 600 – – 1 – 45 .60 –
MB2F SP28 689 – – 1 – 45 .60 –
MB2F SPBLK 622 – – 1 – 45 .60 –
MB2V USP 600 – – 1 – 72 .90 –
MB2V SP28 689 – – 1 – 72 .90 –
MB2V SPBLK 622 – – 1 – 72 .90 –
MB3F & MB3VMounting Bracket
Stop Widths Over 3-3/8"
Steel MB3F USP 600 – – 1 – 45 .60 –
MB3F SP28 689 – – 1 – 45 .60 –
MB3F SPBLK 622 – – 1 – 45 .60 –
MB3V USP 600 – – 1 – 72 .90 –
MB3V SP28 689 – – 1 – 72 .90 –
MB3V SPBLK 622 – – 1 – 72 .90 –
Num
erical820
0-9340
Num
erical1152-8190
Num
erical438-10
21N
umerical
59-437PIV
OTS
CON
TINU
OU
SH
INGES
HIN
GES
29
Bold pricing indicates item is in stock and available for Fast Track
Ives Price Book 3 Effective October 5, 2015 • Rev . 10/15
Num
erical1-0
59
MODEL SUBSTRATE MODEL NUMBERBHMA FINISH WEIGHT
MUST BE ORDERED IN
MULTIPLE QTYMULTIPLE
QTYPACKED PER BOX
LIST PRICE
EACH PACKAGE
FB32Automatic Flush Bolts,Metal DoorsUL 3 HourTop Bolt w/Auxiliary Fire Latch
Brass FB32-12-MD US3 605 – – 1 – $ 168 .00 –
FB32-12-MD US4 606 – – 1 – 168 .00 –
FB32-12-MD US10 612 – – 1 – 168 .00 –
FB32-12-MD US10B 613 – – 1 – 168 .00 –
Stainless FB32-12-MD US32 629 – – 1 – 168 .00 –
FB32-12-MD US32D 630 – – 1 – 168 .00 –
COR32*Door Coordinator
See page 27
FL32Filler Bar
See page 28
RL32Nylon Roller
RL32 US3 605 – – 1 – 82 .80 –
RL32 US4 606 – – 1 – 78 .20 –
RL32 US10 612 – – 1 – 81 .20 –
RL32 US10B 613 – – 1 – 85 .90 –
RL32 US26D 626 – – 1 – 78 .20 –
RL32 US26 625 – – 1 – 82 .80 –
RL32ANylon Roller
w/ASA Strike
Brass RL32-A US3 605 – – 1 – 90 .10 –
RL32-A US4 606 – – 1 – 85 .60 –
RL32-A US10 612 – – 1 – 88 .90 –
RL32-A US10B 613 – – 1 – 93 .60 –
RL32-A US26 625 – – 1 – 90 .10 –
RL32-A US26D 626 – – 1 – 85 .60 –
FB33Top Auto Flush Bolt w/Auxiliary Fire Latch Retrofit Plate
Brass FB33-12-MD US3 605 – – 1 – 173 .50 –
FB33-12-MD US4 606 – – 1 – 173 .50 –
FB33-12-MD US10 612 – – 1 – 173 .50 –
FB33-12-MD US10B 613 – – 1 – 173 .50 –
Stainless FB33-12-MD US32 629 – – 1 – 173 .50 –
FB33-12-MD US32D 630 – – 1 – 173 .50 –
WS33Wall Stop
For Drywall Mounting
Brass WS33 US26D 626 – – 1 – 45 .00 –
WS33XWall Stop
For Masonary Mounting
Brass WS33X US26D 626 – – 1 – 48 .00 –
RL36/36ARoller Latch Mortise
Stainless RL36 US32D 630 – – 1 – 44 .00 –
RL36-A US32D 630 – – 1 – 51 .80 –
RL38Roller Latch Surface Mount
Stainless RL38 US32D 630 – – 1 – 41 .60 –
40Modern Surface BoltPacked with Universal
and Mortise Strike
Brass 40B3 3 IN 605 1 .9 – 1 10 14 .40 –
40B5 3 IN 609 1 .9 – 1 10 14 .40 –
40B10B 3 IN 613 1 .9 – 1 10 15 .10 –
40B15 3 IN 619 1 .9 – 1 10 14 .40 –
40B26 3 IN 625 1 .9 – 1 10 15 .10 –
40B26D 3 IN 626 1 .9 – 1 10 15 .10 –
40B3 4 IN 605 2 .4 – 1 10 15 .10 –
40B5 4 IN 609 2 .4 – 1 10 15 .20 –
40B10B 4 IN 613 2 .4 – 1 10 15 .80 –
40B15 4 IN 619 2 .4 – 1 10 15 .20 –
40B26 4 IN 625 2 .4 – 1 10 15 .80 –
40B26D 4 IN 626 2 .4 – 1 10 15 .80 –
* Special factory preparation for use with vertical rod exit devices available. Add $110.00 List.
HIN
GES
CON
TIN
UO
US
HIN
GES
PIV
OTS
Num
eric
al59
-437
Num
eric
al43
8-10
21N
umer
ical
1152
-819
0N
umer
ical
820
0-9
340
Bold pricing indicates item is in stock and available for Fast Track
30 Ives Price Book 3 Effective October 5, 2015 • Rev. 10/15
MODEL SUBSTRATE MODEL NUMBERBHMA FINISH WEIGHT
MUST BE ORDERED IN
MULTIPLE QTYMULTIPLE
QTYPACKED PER BOX
LIST PRICE
EACH PACKAGE
Continued from previous page.
40Modern Surface BoltPacked with Universal
and Mortise Strike
Brass 40B3 6 IN 605 3 .5 – 1 10 17 .70 –
40B5 6 IN 609 3 .5 – 1 10 17 .70 –
40B10B 6 IN 613 3 .5 – 1 10 18 .40 –
40B15 6 IN 619 3 .5 – 1 10 17 .70 –
40B26 6 IN 625 3 .5 – 1 10 18 .40 –
40B26D 6 IN 626 3 .5 – 1 10 18 .40 –
FS40Auto Floor Type Holder
Floor Clearance 1/2" or less
Brass FS40 US3 605 – – 1 – 70 .80 –
FS40 US4 606 – – 1 – 52 .90 –
FS40 US10 612 – – 1 – 70 .80 –
FS40 US10B 613 – – 1 – 70 .80 –
FS40 US26 625 – – 1 – 70 .80 –
FS40 US26D 626 – – 1 – 52 .90 –
WS40Automatic Wall Stop
and Holder
Brass WS40 US3 605 – – 1 – 95 .00 –
WS40 US4 606 – – 1 – 95 .00 –
WS40 US10 612 – – 1 – 95 .00 –
WS40 US10B 613 – – 1 – 95 .00 –
WS40 US26 625 – – 1 – 95 .00 –
WS40 US26D 626 – – 1 – 89 .10 –
Aluminum WS40 US28 628 – – 1 – 75 .80 –
FB41Automatic Flush Bolt
Wood DoorTop and Bottom BoltUL Listed 90 Minutes
P=PairT=Top Bolt Only
B=Bottom Bolt Only
Brass FB41P-WD US3 605 – – 1 – 175 .60 –
FB41P-WD US4 606 – – 1 – 175 .60 –
FB41P-WD US10 612 – – 1 – 175 .60 –
FB41P-WD US10B 613 – – 1 – 175 .60 –
Stainless FB41P-WD US32 629 – – 1 – 175 .60 –
FB41P-WD US32D 630 – – 1 – 175 .60 –
Brass FB41T-WD US3 605 – – 1 – 91 .90 –
FB41T-WD US4 606 – – 1 – 91 .90 –
FB41T-WD US10 612 – – 1 – 91 .90 –
FB41T-WD US10B 613 – – 1 – 91 .90 –
Stainless FB41T-WD US32 629 – – 1 – 91 .90 –
FB41T-WD US32D 630 – – 1 – 91 .90 –
Brass FB41B-WD US3 605 – – 1 – 91 .90 –
FB41B-WD US4 606 – – 1 – 91 .90 –
FB41B-WD US10 612 – – 1 – 91 .90 –
FB41B-WD US10B 613 – – 1 – 91 .90 –
Stainless FB41B-WD US32 629 – – 1 – 91 .90 –
FB41B-WD US32D 630 – – 1 – 91 .90 –
FS41Automatic
Floor Type HolderFloor Clearance 9/16" to 1-1/16"
Brass FS41 US3 605 – – 1 – 73 .60 –
FS41 US4 606 – – 1 – 56 .00 –
FS41 US10 612 – – 1 – 73 .60 –
FS41 US10B 613 – – 1 – 73 .60 –
FS41 US26 625 – – 1 – 73 .60 –
FS41 US26D 626 – – 1 – 56 .00 –
42Pocket Door Bolt
Brass 42B3 605 0 .9 – 1 10 11 .90 –
42B4 606 0 .9 – 1 10 11 .90 –
42B5 609 0 .9 – 1 10 13 .20 –
42B10 612 0 .9 – 1 10 13 .70 –
42B10B 613 0 .9 – 1 10 13 .70 –
42B15 619 0 .9 – 1 10 13 .20 –
42B26 625 0 .9 – 1 10 13 .70 –
42B26D 626 0 .9 – 1 10 13 .70 –
COR42Door Coordinator
See page 27
Num
eric
al1-
059
Num
erical820
0-9340
Num
erical1152-8190
Num
erical438-10
21N
umerical
59-437PIV
OTS
CON
TINU
OU
SH
INGES
HIN
GES
31
Bold pricing indicates item is in stock and available for Fast Track
Ives Price Book 3 Effective October 5, 2015 • Rev. 1/16
MODEL SUBSTRATE MODEL NUMBERBHMA FINISH WEIGHT
MUST BE ORDERED IN
MULTIPLE QTYMULTIPLE
QTYPACKED PER BOX
LIST PRICE
EACH PACKAGE
FB42Automatic Flush Bolt
Wood DoorUL 20 Minutes
Top Bolt w/ Auxiliary Fire Latch
Brass FB42-WD US3 605 – – 1 – $ 177 .30 –
FB42-WD US4 606 – – 1 – 177 .30 –
FB42-WD US10 612 – – 1 – 177 .30 –
FB42-WD US10B 613 – – 1 – 177 .30 –
Stainless FB42-WD US32 629 – – 1 – 177 .30 –
FB42-WD US32D 630 – – 1 – 177 .30 –
FS42Automatic Floor
Type HolderFloor Clearance 1-1/8" to 1-9/16"
Brass FS42 US3 605 – – 1 – 88 .60 –
FS42 US4 606 – – 1 – 70 .80 –
FS42 US10 612 – – 1 – 88 .60 –
FS42 US10B 613 – – 1 – 88 .60 –
FS42 US26 625 – – 1 – 88 .60 –
FS42 US26D 626 – – 1 – 70 .80 –
FS43Automatic Floor
Type HolderFloor Clearance
1-5/8" to 2-11/16"
Brass FS43 US3 605 – – 1 – 97 .50 –
FS43 US4 606 – – 1 – 79 .80 –
FS43 US10 612 – – 1 – 97 .50 –
FS43 US10B 613 – – 1 – 97 .50 –
FS43 US26 625 – – 1 – 97 .50 –
FS43 US26D 626 – – 1 – 79 .80 –
FL44Filler Bar
See page 28
WS45Wall Stop
For Drywall Mounting
Brass WS45 US3 605 – – 1 – 127 .10 –
WS45 US4 606 – – 1 – 127 .10 –
WS45 US10 612 – – 1 – 127 .10 –
WS45 US10B 613 – – 1 – 127 .10 –
WS45 US26 625 – – 1 – 127 .10 –
WS45 US26D 626 – – 1 – 124 .00 –
Aluminum WS45 US28 628 – – 1 – 100 .00 –
WS45XWall Stop
For Masonary Mounting
Brass WS45X US3 605 – – 1 – 134 .50 –
WS45X US4 606 – – 1 – 134 .50 –
WS45X US10 612 – – 1 – 134 .50 –
WS45X US10B 613 – – 1 – 134 .50 –
WS45X US26 625 – – 1 – 134 .50 –
WS45X US26D 626 – – 1 – 131 .30 –
Aluminum WS45X US28 628 – – 1 – 107 .30 –
S48Mortise Bolt
Brass S48B3 605 2 .6 – 1 10 15 .90 –
S48B5 609 2 .6 – 1 10 19 .10 –
S48B10B 613 2 .6 – 1 10 18 .40 –
S48B15 619 2 .6 – 1 10 17 .70 –
S48B26 625 2 .6 – 1 10 18 .40 –
S48B26D 626 2 .6 – 1 10 18 .40 –
S48Strike Package
09-40-605 605 – – 1 – 4 .50 –
09-40-613 613 – – 1 – 4 .50 –
09-40-626 626 – – 1 – 4 .50 –
FB51UL 3 Hour
Constant Latching Topand Automatic
Bottom Bolt, Metal Door
P=PairT=Top Bolt OnlyB=Bottom Bolt Only
Optional Rod LengthsAvailable
18", 24", 36", 48"5 .30 List Add
Brass FB51P-12-MD US3 605 – – 1 – 168 .00 –
FB51P-12-MD US4 606 – – 1 – 168 .00 –
FB51P-12-MD US10 612 – – 1 – 168 .00 –
FB51P-12-MD US10B 613 – – 1 – 168 .00 –
Stainless FB51P-12-MD US32 629 – – 1 – 168 .00 –
FB51P-12-MD US32D 630 – – 1 – 168 .00 –
Brass FB51T-12-MD US3 605 – – 1 – 87 .60 –
FB51T-12-MD US4 606 – – 1 – 87 .60 –
FB51T-12-MD US10 612 – – 1 – 87 .60 –
FB51T-12-MD US10B 613 – – 1 – 87 .60 –
Stainless FB51T-12-MD US32 629 – – 1 – 87 .60 –
FB51T-12-MD US32D 630 – – 1 – 87 .60 –
COR52Door Coordinator
See page 28
Num
erical1-0
59
HIN
GES
CON
TIN
UO
US
HIN
GES
PIV
OTS
Num
eric
al59
-437
Num
eric
al43
8-10
21N
umer
ical
1152
-819
0N
umer
ical
820
0-9
340
Ives Price Book 3 Effective October 5, 2015 • Rev. 10/15
Bold pricing indicates item is in stock and available for Fast Track
32
MODEL SUBSTRATE MODEL NUMBERBHMA FINISH WEIGHT
MUST BE ORDERED IN
MULTIPLE QTYMULTIPLE
QTYPACKED PER BOX
LIST PRICE
EACH PACKAGE
FB52Flush BoltUL 3 Hour
Constant Latching Topw/ Auxiliary
Fire Latch
Brass FB52-12-MD US3 605 – – 1 – $ 168 .00 –
FB52-12-MD US4 606 – – 1 – 168 .00 –
FB52-12-MD US10 612 – – 1 – 168 .00 –
FB52-12-MD US10B 613 – – 1 – 168 .00 –
Stainless FB52-12-MD US32 629 – – 1 – 168 .00 –
FB52-12-MD US32D 630 – – 1 – 168 .00 –
FB53UL 3 Hour
Constant Latching Topw/ Auxiliary Fire Latch
and Retrofit Plate
Brass FB53-12-MD US3 605 – – 1 – 173 .50 –
FB53-12-MD US4 606 – – 1 – 173 .50 –
FB53-12-MD US10 612 – – 1 – 173 .50 –
FB53-12-MD US10B 613 – – 1 – 173 .50 –
Stainless FB53-12-MD US32 629 – – 1 – 173 .50 –
FB53-12-MD US32D 630 – – 1 – 173 .50 –
054Dutch Door Bolt
Brass 054B3 605 2 .3 – 1 5 41 .60 –
054B4 606 2 .3 – 1 5 41 .60 –
054B10 612 2 .3 – 1 5 37 .90 –
054B10B 613 2 .3 – 1 5 45 .60 –
054B15 619 2 .3 – 1 5 47 .20 –
054B26 625 2 .3 – 1 5 45 .60 –
054B26D 626 2 .3 – 1 5 41 .60 –
059Handrail Bracket
Aluminum 059A3 666 3 .2 – 1 20 3 .10 –
059A5 – 3 .2 – 1 20 3 .10 –
059A10 668 3 .2 – 1 20 3 .10 –
059A10B 703 3 .2 – 1 20 3 .10 –
059A14 669 3 .2 – 1 20 3 .10 –
059A15 670 3 .2 – 1 20 3 .10 –
059A92 673 3 .2 – 1 20 3 .10 –
059A-716 716 3 .2 – 1 20 3 .10 –
059A-BLK – 3 .3 – 1 20 4 .10 –
059A-W – 3 .3 – 1 20 4 .10 –
SP059A3 666 68 .0 Yes 20 20 63 .30
SP059A5 – 68 .0 Yes 20 20 63 .30
SP059A14 669 68 .0 Yes 20 20 63 .30
SP059A92 673 68 .0 Yes 20 20 63 .30
Brass
059B3 605 3 .2 – 1 10 18 .00 –
059B5 609 3 .2 – 1 10 24 .80 –
059B10B 613 3 .2 – 1 10 20 .50 –
059B15 619 3 .2 – 1 10 20 .50 –
059B15A 620 3 .2 – 1 10 20 .50 –
059B19 622 3 .2 – 1 10 20 .50 –
059B26 625 3 .2 – 1 10 24 .80 –
059B26D 626 3 .2 – 1 10 24 .80 –
059B-716 – 3 .2 – 1 10 20 .50 –
SC059B-716 – – Yes 5 5 – 106 .10
SP059B10B 613 37 .0 Yes 10 10 – 212 .20
SP059B26 625 37 .0 Yes 10 10 – 253 .80
SPS059B-605 605 - Yes 10 10 – 184 .10
SPS059B-619 619 - Yes 10 10 – 212 .20
SPS059B-620 620 - Yes 10 10 – 212 .20
SPS059B-716 – - Yes 10 10 – 212 .20
Zinc ** 059Z-619E – – – 1 20 4 .80 –
Num
eric
al1-
059
Num
erical820
0-9340
Num
erical1152-8190
Num
erical438-10
21N
umerical
1-059
PIVO
TSCO
NTIN
UO
US
HIN
GESH
INGES
33
Bold pricing indicates item is in stock and available for Fast Track
Ives Price Book 3 Effective October 5, 2015 • Rev. 1/16
Ives Price Book 3 Effective October 5, 2015 • Rev. 10/15
Bold pricing indicates item is in stock and available for Fast Track
38
MODEL SUBSTRATE MODEL NUMBERBHMA FINISH WEIGHT
MUST BE ORDERED IN
MULTIPLE QTYMULTIPLE
QTYPACKED PER BOX
LIST PRICE
EACH PACKAGE
218*Finger Pull
Brass 218B3 605 1 .6 Yes 4 40 – $ 8 .80
218B5 609 1 .6 Yes 4 40 – 16 .80
218B10 612 1 .6 Yes 4 40 – 16 .80
218B10B 613 1 .6 Yes 4 40 – 16 .80
218B15 619 1 .6 Yes 4 40 – 8 .80
218B26 625 1 .6 Yes 4 40 – 11 .90
218B26D 626 1 .6 Yes 4 40 – 11 .90
221Flush Pull
Brass 221B3 605 1 .0 – 1 20 3 .20
221B4 606 1 .0 – 1 20 3 .20
221B5 609 1 .0 – 1 20 3 .20
221B10 612 1 .0 – 1 20 4 .30
221B10B 613 1 .0 – 1 20 3 .80
221B15 619 1 .0 – 1 20 3 .60
221B26 625 1 .0 – 1 20 3 .80
221B26D 626 1 .0 – 1 20 3 .80
SPS221B-605 605 – – 25 25 – 81 .80
SPS221B-609 609 – – 25 25 – 105 .60
SPS221B-619 619 – – 25 25 – 105 .60
SPS221B-620 620 – – 25 25 – 105 .60
SPS221B-716 – – – 25 25 – 105 .60
222Flush Pull
Brass 222B3 605 1 .5 – 1 10 18 .60 –
222B4 606 1 .5 – 1 10 18 .60 –
222B5 609 1 .5 – 1 10 21 .30 –
222B10 612 1 .5 – 1 10 21 .30 –
222B10B 613 1 .5 – 1 10 21 .30 –
222B15 619 1 .5 – 1 10 20 .50 –
222B26 625 1 .5 – 1 10 21 .30 –
222B26D 626 1 .5 – 1 10 21 .30 –
223Flush Pull
Brass 223B3 605 0 .7 – 1 10 5 .70 –
223B4 606 0 .7 – 1 10 5 .70 –
223B10 612 0 .7 – 1 10 6 .40 –
223B10B 613 0 .7 – 1 10 6 .40 –
223B15 619 0 .7 – 1 10 6 .10 –
223B26 625 0 .7 – 1 10 6 .40 –
223B26D 626 0 .7 – 1 10 6 .40 –
227Flush Pull
Brass 227B3 605 1 .0 – 1 10 8 .50 –
227B4 606 1 .0 – 1 10 8 .50 –
227B5 609 1 .0 – 1 10 9 .40 –
227B10 612 1 .0 – 1 10 9 .90 –
227B10B 613 1 .0 – 1 10 9 .90 –
227B15 619 1 .0 – 1 10 9 .40 –
227B26 625 1 .0 – 1 10 9 .90 –
227B26D 626 1 .0 – 1 10 9 .90 –
230Door Edge Pull
Brass 230B3 605 1 .3 – 1 10 12 .00 –
230B4 606 1 .3 – 1 10 12 .00 –
230B5 609 1 .3 – 1 10 13 .20 –
230B10 612 1 .3 – 1 10 12 .00 –
230B10B 613 1 .3 – 1 10 13 .80 –
230B15 619 1 .3 – 1 10 13 .20 –
230B26 625 1 .3 – 1 10 13 .80 –
230B26D 626 1 .3 – 1 10 13 .80 –
Num
eric
al59
-437
* NOTE: 218 Finger Pull priced at 4 per bag. Qty of 10 = 40 pieces.
Num
erical820
0-9340
Num
erical1152-8190
Num
erical438-10
21N
umerical
1-059
PIVO
TSCO
NTIN
UO
US
HIN
GESH
INGES
39
Bold pricing indicates item is in stock and available for Fast Track
Ives Price Book 3 Effective October 5, 2015 • Rev. 1/16
MODEL SUBSTRATE MODEL NUMBERBHMA FINISH WEIGHT
MUST BE ORDERED IN
MULTIPLE QTYMULTIPLE
QTYPACKED PER BOX
LIST PRICE
EACH PACKAGE
253Deluxe Surface Bolt
Brass 253B3 8 IN US MS 605 – – 1 5 $ 59 .40 –253B10B 8 IN US MS 613 – – 1 5 68 .30 –253B26D 8 IN US MS 626 – – 1 5 68 .30 –253B3 12 IN US MS 605 – – 1 5 78 .10 –253B10B 12 IN US MS 613 – – 1 5 83 .50 –253B26D 12 IN US MS 626 – – 1 5 83 .50 –
Bold pricing indicates item is in stock and available for Fast Track
Ives Price Book 3 Effective October 5, 2015 • Rev. 1/16
Num
erical1152-8190
8100/8300/9100/9200 Series Pulls8169/8181/8281/8189/8312/8320/8371/8372/8373/8700/8800/8848/8975 - Decorative Series
Back to Back Pull Mounting
Type K MountType J or N Mount
(push) (pull)
Back to Back “Two-Anchor" Wood or Metal Door
Type Standard Mount
Standard Mounting
Type F Mount
Wood Doors Concealed Pull Mounting With Push Plate
Type G Mount
Concealed Pull Plate Mounting
Type L Mount
Reinforced Hollow Metal Door Concealed Pull Mounting
Mounting Methods
HIN
GES
CON
TIN
UO
US
HIN
GES
PIV
OTS
Num
eric
al1-
059
Num
eric
al59
-437
Num
eric
al43
8-10
21N
umer
ical
820
0-9
340
Bold pricing indicates item is in stock and available for Fast Track
60 Ives Price Book 3 Effective October 5, 2015 • Rev. 1/16
Num
eric
al11
52-8
190
8100/8300/9100/9200 Series Pulls8169/8181/8281/8189/8312/8320/8371/8372/8373/8700/8800/8848/8975 - Decorative Series
Mounting Methods
Num
erical820
0-9340
Num
erical438-10
21N
umerical
59-437N
umerical
1-059
PIVO
TSCO
NTIN
UO
US
HIN
GESH
INGES
61
Bold pricing indicates item is in stock and available for Fast Track
Ives Price Book 3 Effective October 5, 2015 • Rev. 1/16
Num
erical1152-8190
8100/8200/8300/9100/9200 - Series8169/8181/8281/8189/8312/8320/8371/8372/8373/8700/8800/8848/8975 - Decorative Series
Special Pricing Information
• Through bolt fasteners are for standard 1-3/4" thick doors.• Specify door thickness if other than standard.• All screws are furnished standard as Phillips Head Drive.• For fasteners other than shown contact our Customer Service Department for availability.
Suffix List Add
Optional Mounting Types: No Suffix Req'd Standard (Provided with all single pulls unless other mount noted .)
X Security Thru Bolt with Std . Washer . 9264, 9266 41 .60 - 613/US10B 26 .00 all other Finishes
Prefix
* PR Order as pair with model numbers (e .g . - PR8103EZ) Double the list price for single unit and add mounting price from above .
SGL Single pull model machined for back to back application . Based on mounting
Model
Optional Custom Lengths:(available in 1" increments, fractional increments available as engineered specials)
9100HD, 9103EZHD, 9190HD For lengths <28" Same as 28" List Price
9100HD, 9103EZHD, 9190HD For lengths >28" and <33" Same as 33" List Price
9100HD, 9103EZHD, 9190HD For lengths >33" 6 .00/additional inch
Optional Finish AM Anti-microbial Coating - US26D or US32D finishes only 31 .20
Optional Cut-Outs: CFC Cut for cylinder on 8200/8300 Series Push or Pull Plates (1-1/4" diameter) 4 .60
CFT Cut for Thumbturn on 8200/8300 Series Push or Pull Plates (3-3/8" diameter) 5 .10
Plates ordered for cut-out for cylinder or thumbturn, cutout is positioned 2" from top and centered in the plate width, up to 4" wide plates . For plates over 4" in width, cut-out is locat-ed 2" from edge . Please specify Door Handing LH or RH when ordering plates wider than 4" .
Model Description List Add
Optional Plate: 8300 For plate pierced for Pull, order 8300 Series Specifiy Center to Center dimension (5-1/4", 6", 8", 10"), Finish, and Plate Size
(to 8200 list price) 2 .00
HIN
GES
CON
TIN
UO
US
HIN
GES
PIV
OTS
Num
eric
al1-
059
Num
eric
al59
-437
Num
eric
al43
8-10
21N
umer
ical
820
0-9
340
Bold pricing indicates item is in stock and available for Fast Track
62 Ives Price Book 3 Effective October 5, 2015 • Rev. 1/16
Num
eric
al11
52-8
190
MODEL PULL CTC SUBSTRATE MODEL NUMBERBHMA FINISH WEIGHT
MUST BE ORDERED IN
MULTIPLE QTYMULTIPLE
QTYPACKED PER BOX
LIST PRICE
EACH PACKAGE
8102HDStraight Door Pull
3/4" Round, 1-1/2" Clearance
Antimicrobial CoatingUS26D-AM or US32D-AM
available .
See page 61 for optional mounting types and
pricing .
6"
Brass 8102HD-6 US3 605 – – 1 – $ 43 .00 –
8102HD-6 US4 606 – – 1 – 43 .00 –
8102HD-6 US10 612 – – 1 – 48 .90 –
8102HD-6 US10B 613 – – 1 – 50 .70 –
8102HD-6 US15 619 – – 1 – 50 .70 –
8102HD-6 US26 625 – – 1 – 48 .30 –
8102HD-6 US26D 626 – – 1 – 43 .00 –
Aluminum 8102HD-6 US28 628 – – 1 – 17 .20 –
Stainless 8102HD-6 US32D 630 – – 1 – 27 .00 –
8"
Brass 8102HD-8 US3 605 – – 1 – 48 .30 –
8102HD-8 US4 606 – – 1 – 48 .30 –
8102HD-8 US10 612 – – 1 – 55 .40 –
8102HD-8 US10B 613 – – 1 – 57 .30 –
8102HD-8 US15 619 – – 1 – 57 .30 –
8102HD-8 US26 625 – – 1 – 53 .70 –
8102HD-8 US26D 626 – – 1 – 48 .30 –
Aluminum 8102HD-8 US28 628 – – 1 – 17 .80 –
Stainless 8102HD-8 US32D 630 – – 1 – 30 .60 –
10"
Brass 8102HD-0 US3 605 – – 1 – 56 .50 –
8102HD-0 US4 606 – – 1 – 56 .50 –
8102HD-0 US10 612 – – 1 – 65 .00 –
8102HD-0 US10B 613 – – 1 – 66 .80 –
8102HD-0 US15 619 – – 1 – 66 .80 –
8102HD-0 US26 625 – – 1 – 55 .10 –
8102HD-0 US26D 626 – – 1 – 55 .40 –
Aluminum 8102HD-0 US28 628 – – 1 – 19 .00 –
Stainless 8102HD-0 US32D 630 – – 1 – 35 .80 –
8103HDStraight Door Pull
1" Round, 1-1/2" Clearance
Antimicrobial CoatingUS26D-AM or US32D-AM
available .
See page 61 for optional mounting types and
pricing .
8"
Brass 8103HD-8 US3 605 – – 1 – 85 .80 –
8103HD-8 US4 606 – – 1 – 85 .80 –
8103HD-8 US10 612 – – 1 – 96 .60 –
8103HD-8 US10B 613 – – 1 – 100 .00 –
8103HD-8 US15 619 – – 1 – 100 .00 –
8103HD-8 US26 625 – – 1 – 91 .30 –
8103HD-8 US26D 626 – – 1 – 86 .10 –
Aluminum 8103HD-8 US28 628 – – 1 – 24 .80 –
Stainless 8103HD-8 US32 629 – – 1 – 61 .80 –
8103HD-8 US32D 630 – – 1 – 53 .10 –
10"
Brass 8103HD-0 US3 605 – – 1 – 94 .80 –
8103HD-0 US4 606 – – 1 – 94 .80 –
8103HD-0 US10 612 – – 1 – 109 .00 –
8103HD-0 US10B 613 – – 1 – 109 .00 –
8103HD-0 US15 619 – – 1 – 112 .70 –
8103HD-0 US26 625 – – 1 – 100 .00 –
8103HD-0 US26D 626 – – 1 – 94 .80 –
Aluminum 8103HD-0 US28 628 – – 1 – 26 .10 –
Stainless 8103HD-0 US32 629 – – 1 – 68 .50 –
8103HD-0 US32D 630 – – 1 – 59 .60 –Continued on next page.
Num
erical820
0-9340
Num
erical438-10
21N
umerical
59-437N
umerical
1-059
PIVO
TSCO
NTIN
UO
US
HIN
GESH
INGES
63
Bold pricing indicates item is in stock and available for Fast Track
Ives Price Book 3 Effective October 5, 2015 • Rev. 1/16
Num
erical1152-8190
MODEL PULL CTC SUBSTRATE MODEL NUMBERBHMA FINISH WEIGHT
B-CS Hand Bevel Four Edges (B4E) and Counter Sunk Holes Standard
B-NH No Mounting Holes - US32D, US32, US3, US4, US15,
US28, Clear, Black only
21 .00
B-NHA No Mounting Holes with Adhesive - US32D, US32, US3, US4, US15, US28,
Clear, Black only
*not available on UL listed kickplates
12" and under
over 12" up to 24"
21 .00
45 .00
TK-TX Includes Self Drilling Tek Screws and Torx Brand Security
Screws (package of 16 each)
10 .00
ERS Prepped for Extra Row of Screws (For extra mounting hole option, customer must specify
location and quantity of holes required)
Consult Factory
MODEL DESCRIPTION SIZE LIST ADD
8401 Gasket Tape Kit (sold separately) Fits 8" x 34" $18 .00 ea .
8402 UL Label Kickplate (not available on plastic
kickplates)
15 .00 ea .
Num
erical1152-8190
Num
erical438-10
21N
umerical
59-437N
umerical
1-059
PIVO
TSCO
NTIN
UO
US
HIN
GESH
INGES
Ives Price Book 3 Effective October 5, 2015 • Rev. 10/15
75
Bold pricing indicates item is in stock and available for Fast TrackContact Ives Customer Service for pricing on additional sizes and finishes
Num
erical820
0-9340
Residential Kickplates
Door Plate Hundred Square Inch Sizing Chart width
When pricing IVES Series 8400 Door Protection Plates to order, find the hundred square inch size on the chart above . If ordering in increments not shown on above matrix, use the next larger size, height or width . Example: 9 1/2" x 33 1/2" = 10 x 34 or 3 .40 sq . inches . For pricing, multiply square inch size by list price = 3 .40 sq . inches X US32D list $11 .70 = $39 .78
Custom Lengths. Must be ordered in 1" increments. List price for 1" increments between 36" and 72" use 72" list price. Greater than 72" use list price add per inch charge per finish.
Ives Price Book 3 Effective October 5, 2015 • Rev. 10/15
125
Contact Ives Customer Service for pricing on additional sizes and finishes
Parts
IVES ARCHITECTURAL HARDWARE - Parts Price List
Description Finish Part No.List Price
Each 9190 (1 3/4" Door) (Continued)NO Mount B10B 09-525-613 41 .10
NO Mount B26 09-525-625 41 .10
NO Mount B26D 09-525-626 41 .10
NO Mount S32 09-525-629 41 .10
NO Mount S32D 09-525-630 41 .10
NO Mount B15 09-525-619 41 .10
8100/8300/9100 (2" & 2 1/4" Door)Standard Mount 2" Door B3, B4 PULLPART .1001 4 .90
Standard Mount 2" Door B10 PULLPART .1002 4 .90
Standard Mount 2" Door B10B PULLPART .1003 4 .90
Standard Mount 2" Door B15, B26, B26D, PA28, S32, S32D PULLPART .1004 4 .90
F Mount 2" Door - PULLPART .1005 2 .70
F Mount 2 1/4" Door - PULLPART .1006 2 .70
J / N Mount (combined pack) 2" - 2 1/4" Door - 09-294-603 10 .40
M Mount 2 1/4" Door S32D PULLPART .1007 40 .00
M Mount 2 1/4" Door B3 PULLPART .1008 40 .00
M Mount 2 1/4" Door B4 PULLPART .1009 40 .00
M Mount 2 1/4" Door B10 PULLPART .1010 40 .00
M Mount 2 1/4" Door B10B PULLPART .1011 40 .00
M Mount 2 1/4" Door B26 PULLPART .1012 40 .00
M Mount 2 1/4" Door S32 PULLPART .1013 40 .00
M Mount 2 1/4" Door B26d PULLPART .1014 40 .00
M Mount 2 1/4" Door B15 PULLPART .1015 40 .00
O Mount 2" Door S32D PULLPART .1016 33 .60
O Mount 2" Door B3 PULLPART .1017 33 .60
O Mount 2" Door B4 PULLPART .1018 33 .60
O Mount 2" Door B10 PULLPART .1019 33 .60
O Mount 2" Door B10B PULLPART .1020 33 .60
O Mount 2" Door B26 PULLPART .1021 33 .60
O Mount 2" Door S32 PULLPART .1022 33 .60
O Mount 2" Door B26D PULLPART .1023 33 .60
O Mount 2" Door B15 PULLPART .1024 33 .60
O Mount 2 1/4" Door S32D PULLPART .1025 33 .60
O Mount 2 1/4" Door B3 PULLPART .1026 33 .60
O Mount 2 1/4" Door B4 PULLPART .1027 33 .60
O Mount 2 1/4" Door B10 PULLPART .1028 33 .60
O Mount 2 1/4" Door B10B PULLPART .1029 33 .60
O Mount 2 1/4" Door B26 PULLPART .1030 33 .60
O Mount 2 1/4" Door S32 PULLPART .1031 33 .60
O Mount 2 1/4" Door B26D PULLPART .1032 33 .60
O Mount 2 1/4" Door B15 PULLPART .1033 33 .60
NS Mount 2" Door B3,B4 PULLPART .1034 23 .70
NS Mount 2" Door B15, B26, B26D, PA28, S32, S32D PULLPART .1035 23 .70
NS Mount 2" Door B10 PULLPART .1036 23 .70
NS Mount 2" Door B10B PULLPART .1037 23 .70
NS Mount 2" Door B3,B4 PULLPART .1038 23 .70
NS Mount 2" Door B15, B26, B26D, PA28, S32, S32D PULLPART .1039 23 .70
NS Mount 2" Door B10 PULLPART .1040 23 .70
NS Mount 2" Door B10B PULLPART .1041 23 .70
NO Mount 2" Door B3 PULLPART .1042 41 .10
NO Mount 2" Door B4 PULLPART .1043 41 .10
NO Mount 2" Door B10 PULLPART .1044 41 .10
NO Mount 2" Door B10B PULLPART .1045 41 .10
126
Contact Ives Customer Service for pricing on additional sizes and finishes
Part
s
IVES ARCHITECTURAL HARDWARE - Parts Price List
Ives Price Book 3 Effective October 5, 2015 • Rev . 10/15
Description Finish Part No.List Price
Each 8100/8300/9100 (2” & 2 1/4” Door) (Continued)NO Mount 2” Door B26 PULLPART .1046 41 .10
NO Mount 2” Door B26D PULLPART .1047 41 .10
NO Mount 2” Door S32 PULLPART .1048 41 .10
NO Mount 2” Door S32D PULLPART .1049 41 .10
NO Mount 2” Door B15 PULLPART .1050 41 .10
NO Mount 2 1/4” Door B3 PULLPART .1051 41 .10
NO Mount 2 1/4” Door B4 PULLPART .1052 41 .10
NO Mount 2 1/4” Door B10 PULLPART .1053 41 .10
NO Mount 2 1/4” Door B10B PULLPART .1054 41 .10
NO Mount 2 1/4” Door B26 PULLPART .1055 41 .10
NO Mount 2 1/4” Door B26D PULLPART .1056 41 .10
NO Mount 2 1/4” Door S32 PULLPART .1057 41 .10
NO Mount 2 1/4” Door S32D PULLPART .1058 41 .10
NO Mount 2 1/4” Door B15 PULLPART .1059 41 .10* Type M and O mounting packs are sold in multiples of 1.
Pull HD Mounting Packages3/8HD Standard Mount B15,B26,26D PULLPART .1067 4 .90
3/8HD Standard Mount B3 PULLPART .1068 4 .90
3/8HD Standard Mount B10 PULLPART .1069 4 .90
3/8HD Standard Mount B10B PULLPART .1070 4 .90
5/16HD Standard Mount B15,B26,26D PULLPART .1063 4 .90
5/16HD Standard Mount B3 PULLPART .1064 4 .90
5/16HD Standard Mount B10 PULLPART .1065 4 .90
5/16HD Standard Mount B10B PULLPART .1066 4 .90
5/16HD Mount 2-2 .1/4” Door B15,B26,B26D PULLPART .1071 4 .90
5/16HD Mount 2-2 .1/4” Door B3 PULLPART .1072 4 .90
5/16HD Mount 2-2 .1/4” Door B10 PULLPART .1073 4 .90
5/16HD Mount 2-2 .1/4” Door B10B PULLPART .1074 4 .90
3/8HD Mount 2-2 .1/4” Door B15,B26,B26D PULLPART .1075 4 .90
3/8HD Mount 2-2 .1/4” Door B3,B4 PULLPART .1076 4 .90
3/8HD Mount 2-2 .1/4” Door B10 PULLPART .1077 4 .90
3/8HD Mount 2-2 .1/4” Door B10B PULLPART .1078 4 .90
5/16HD G Mount - PULLPART .1079 2 .70
3/8HD G Mount - PULLPART .1080 2 .70
3/8HD I Mount - PULLPART .1082 29 .50
5/16HD I Mount - PULLPART .1081 29 .50
3/8HD L Mount - PULLPART .1084 15 .00
5/16HD L Mount - PULLPART .1083 29 .50
5/16HD J Mount - PULLPART .1085 10 .40
5/16HD J Mount 2-2 .1/4” Door - PULLPART .1086 10 .40
3/8HD N Mount - PULLPART .1087 10 .40
3/8HD N Mount 2-2 .1/4” Door - PULLPART .1088 10 .40
3/8HD O Mount B3 PULLPART .1089 16 .40
3/8HD O Mount US4 PULLPART .1090 16 .40
3/8HD O Mount US10 PULLPART .1091 16 .40
3/8HD O Mount US10B PULLPART .1092 16 .40
3/8HD O Mount US15 PULLPART .1093 16 .40
3/8HD O Mount US26 PULLPART .1094 16 .40
3/8HD O Mount US26D PULLPART .1095 16 .40
3/8HD O Mount US32 PULLPART .1096 16 .40
3/8HD O Mount US32D PULLPART .1097 16 .40
3/8HD O Mount 2-2 .1/4” Door US3 PULLPART .1098 33 .70
Ives Price Book 3 Effective October 5, 2015 • Rev. 10/15
127
Contact Ives Customer Service for pricing on additional sizes and finishes
Parts
IVES ARCHITECTURAL HARDWARE - Parts Price List
Description Finish Part No.List Price
Each Pull Hd Mounting Packages (Continued)3/8HD O Mount 2-2 .1/4” Door US4 PULLPART .1099 33 .70
3/8HD O Mount 2-2 .1/4” Door US10 PULLPART .1100 33 .70
3/8HD O Mount 2-2 .1/4” Door US10B PULLPART .1101 33 .70
3/8HD O Mount 2-2 .1/4” Door US15 PULLPART .1102 33 .70
3/8HD O Mount 2-2 .1/4” Door US26 PULLPART .1103 33 .70
3/8HD O Mount 2-2 .1/4” Door US26D PULLPART .1104 33 .70
3/8HD O Mount 2-2 .1/4” Door US32 PULLPART .1105 33 .70
3/8HD O Mount 2-2 .1/4” Door US32D PULLPART .1106 33 .70
3/8HD NO Mount US3 PULLPART .1115 41 .10
3/8HD NO Mount US4 PULLPART .1116 41 .10
3/8HD NO Mount US10 PULLPART .1117 41 .10
3/8HD NO Mount US10B PULLPART .1118 41 .10
3/8HD NO Mount US15 PULLPART .1119 41 .10
3/8HD NO Mount US26 PULLPART .1120 41 .10
3/8HD NO Mount US26D PULLPART .1121 41 .10
3/8HD NO Mount US32 PULLPART .1122 41 .10
3/8HD NO Mount US32D PULLPART .1123 41 .10
3/8HD NO Mount 2-2 .1/4” Door US3 PULLPART .1124 41 .10
3/8HD NO Mount 2-2 .1/4” Door US4 PULLPART .1125 41 .10
3/8HD NO Mount 2-2 .1/4” Door US10 PULLPART .1126 41 .10
3/8HD NO Mount 2-2 .1/4” Door US10B PULLPART .1127 41 .10
3/8HD NO Mount 2-2 .1/4” Door US15 PULLPART .1128 41 .10
3/8HD NO Mount 2-2 .1/4” Door US26 PULLPART .1129 41 .10
3/8HD NO Mount 2-2 .1/4” Door US26D PULLPART .1130 41 .10
3/8HD NO Mount 2-2 .1/4” Door US32 PULLPART .1131 41 .10
3/8HD NO Mount 2-2 .1/4” Door US32D PULLPART .1132 41 .10
3/8HD NS Mount B15,B26,B26D PULLPART .1107 23 .70
3/8HD NS Mount B3,B4 PULLPART .1108 23 .70
3/8HD NS Mount B10 PULLPART .1109 23 .70
3/8HD NS Mount B10B PULLPART .1110 23 .70
3/8HD NS Mount 2-2 .1/4” Door B15,B26,B26D PULLPART .1111 23 .70
3/8HD NS Mount 2-2 .1/4” Door B3,B4 PULLPART .1112 23 .70
3/8HD NS Mount 2-2 .1/4” Door B10 PULLPART .1113 23 .70
3/8HD NS Mount 2-2 .1/4” Door B10B PULLPART .1114 23 .70
Ives Price Book 3 Effective October 5, 2015 • Rev. 10/15
128
Contact Ives Customer Service for pricing on additional sizes and finishes
Part
s
WARRANTY
Ives (the “Company”) warrants only to Customer that the products will be free from defects in material and workmanship for a period of 12 months from the date of shipment of products. Continuous hinges carry a Lifetime Warranty with exception of electrified continuous hinged which carry a 12 month Warranty from time of shipment. The Customer shall be obligated to promptly report any failure to conform to this warranty in writing to the Company within the warranty period provided above. Company’s sole obligation under this warranty is limited to repairing or replacing, at its option, the defective products.
NO OTHER WARRANTIES, EXPRESS OR IMPLIED, ARE MADE WITH RESPECT TO THE PRODUCTS INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
The provisions of this limited warranty do not apply to products: (i) used for the purposes for which they are not designed or intended; (ii) which have been repaired or altered without Company’s prior written consent; (iii) which have been subjected to misuse, abuse, negligence, or accident; (iv) which have been improperly stored, installed, maintained, or operated; (v) which have been used in violation of written instructions provided by Company to Customer; (vi) which have been subjected to improper temperature, humidity, or oth-er environmental conditions; (vii) which have been affected by normal wear and tear; or (viii) which, based on Company’s examination, do not disclose to Company’s satisfaction nonconformance to the warranty.
The following costs and expenses are not covered by the provisions of this limited warranty: (i) labor costs for the removal and reinstallation of products; (ii) shipping and freight expenses required to return products to Company; (iii) normal maintenance; and (iv) economic losses. In addition, the provisions of this warranty are not applicable to anything other than defects in Company’s material (products only) or workmanship.
CONSUMER PRODUCTS. With respect to “consumer products” as defined under the Magnuson-Moss Warranty Act (“MMWA”), the following statements are made. (a) Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. IF ANY IMPLIED WARRANTY IS PROVIDED UNDER THE MMWA, IT IS LIMITED TO THE DURATION OF THE WARRANTY PROVIDED ABOVE. (b) Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. (c) This warranty gives you specific legal rights and you may also have other rights which vary from state to state.
Allegion (NYSE: ALLE) creates peace of mind by pioneering safety and security. As a $2 billion provider of security solutions for homes and businesses, Allegion employs more than 8,000 people and sells products in more than 120 countries across the world. Allegion comprises more than 25 global brands, including strategic brands CISA®, Interflex®, LCN®, Schlage® and Von Duprin®.