Indoor Bike Owner’s Manual For safe use and product knowledge, please completely read this Product OWNERS MANUAL. S1/S2 Sport Series v. 1.2
Indoor Bike
Owner’s Manual
For safe use and product knowledge, please completely read this Product OWNERS MANUAL.
S1/S2 Sport Series
v. 1.2
ext. 4
S1/S2
Welcome to LifeSpan
3
1/
Web site: www.LifeSpanFitness.com
r
Welcome to Lifespan
Limited Home Use Warranty
Important Safety Precautions
S1 Contents
S1 Assembly Instructions
S1 Assembly Instructions Continued
S2 Contents
S2 Assembly Instructions
S2 Assembly Instructions Continued
S1/S2 Adjustments
S1 Exploded View
S2 Exploded View
Extended Warranty
Serial Number Information
3
5
6
7
8
9
10
11
12
13
14
15
16
19
20
Table of Contents
4
1/
S148” Max. Length47” Max. Height18” Wide
84 lbs.
31 lbs.
Seat HeightHandlebar HeightSeat Fore/Aft
Alloy with sealed bearings
PVC Dipped
Micro Adjustment knob with felt pad friction control
Standard Mount Seat
Water Bottle HolderFront Mounted Transport Wheels4 Adjustable Foot Pads for Leveling
300 lbs
S248” Max. Length45” Max. Height21.5” Wide
97 lbs.
40 lbs.
Seat HeightHandlebar HeightSeat Fore/Aft
Alloy with sealed bearings
PVC Dipped
Micro Adjustment knob with felt pad friction control
Standard Mount Two Tone Bike Seat
Water Bottle HolderFront Mounted Transport Wheels4 Adjustable Foot Pads for Leveling
300 lbs. Max. User Weight:
Specifications
6
The LifeSpan Sport S1/S2 Indoor Bike(s) come with the following limited warranty, which applies only to the use of the Indoor Bike in the home, for residential, non-commercial purposes:
Frame:Parts:Labor:Wear Items:
S15 years90 days90 days90 days
S25 years1 year1 year90 days (friction pad, seat and pedals)
Labor warranty does not cover replacement of customer assembled parts.
Limited Home Use Warranty
S1/S2
(see details above)
the registration is
bike
7
Important Safety Precautions1/
Keep children off your indoor bike at all times.
.
Plastic 2
#19
1
3
4
5
7
6
2
8
10
11
121314
1414
15
18
19
1918
9
#6
#21
#18 Screw x 4
#9
#8
#20#2 Seat Bracket
#10
#12#16
S1 Contents
16
1819
1819
1919
18
18
9
8
19
18 18
10 12
a) Remove plastic block attached to frame for protection during shipping.
b) Remove bolts (18) and washers (19) from the rear base.
c) Stand the main frame assembly upright with the rear base (9) positioned underneath the frame.
d) Insert two bolts (18) with washers (19) down through the holes in the frame and into the rear base.
e) Once both bolts are started, securely tighten rear base (9) to frame.
a) Remove plastic block attached to frame for protection during shipping. b) Remove bolts (18) and washers (19) from the front base.
c) Position the front base underneath the frame.
d) Insert the two bolts (18) with washers (19) down through the holes in the frame and into the front base (8).
d) Once both bolts are started, securely tighten the front base (8) to the frame.
12 10on the bolt of
the
1/
Tighten both pedals with the multifuntion wrench (20).
S1 Assembly Instructions
Frontof Bike
10
6
7
Turn knob clockwise to tighten
3
4
2 a) Loosen the knob (5) on the front of the frame and slide the seat bracket (2) into the frame. (follow the round adjustment knob instructions above)
b) Loosen the knob (4) on the botton of the seat bracket (2) and slide the seat post (3) into the seat bracket. (follow the round adjustment knob instructions above)
5
Insert handlebar post (6) into the frame, with holesfacing out toward knob. Adjust height and tighten knob (7).(follow round adjustment knob instructions above)
Round Adjustment Knob Instructions
S1 Assembly Instructions Contiuned
7
S2 Contents
15
15
1/
5555
5656
52
57 57
12
Place a washer (55) and cap nut (56) over each bolt and with the multifunction wrench secure the rear basein place.
Place a washer (55) and cap nut (56) over each bolt andwith the multifuntion wrench secure the front basein place.
Tighten both pedals with the multifuntion wrench.
Identify which pedal goes on the right side and which pedal goes on the left side by locating the “R” on the bolt of the right pedal (62R) and the “L” on the bolt of the left pedal (62L).
U
S2 Assembly Instructions
Frontof Bike
1/
Turn knob clockwise to tighten
Insert handlebar post (16) into the frame with holes facing out toward knob. Adjust height and tighten knob (15). (follow round adjustment knob instuctions above)
Round Adjustment Knob Instructions
63
a) Loosen the knob (15) on the botton of the seat bracket (17). (follow round adjustment knob instructions above)
b) Slide seat post (63) into the seat bracket (17) from the front of the bracket as illustrated. (follow round adjustment knob instructions above)
S2 Assembly Instructions Contiuned
13
S1/S2 Adjustments
Adjust the foot down until it touches the floor. Repeat if necessary until the bike is completely stable.
Where to Place your Indoor BikePlace
The straps should be tight enough to keep the ball of your foot on the pedals throughout the completepedal rotation. Before your workout, test each strap and adjust if required. To tighten the strap simplypull down on the loose end of the strap until the strap is properly tensioned. To loosen the strap, pressdown on the top of the clip and pull the strap up.
14
S1 Exploded View
15
0614
05
0301
021213
01
05
041406
09
0811
07
0710
15
09 0108
09
01
02
02
03 04
05070603
04
0607
05
0305
06
0403
01
02
0204
08
03
02
01
06
02
01
07
02
04
07
07
01
04
06
0304
05 12
13
01
15
02
04
01
0402
0506
0309
0708
02
0706
05
02
04
01
03
0506
07 11
14
1115 16 10
1312
16
14
1709
08
07
05 04 02
010306
1918
09
S2 Exploded View
16
3235
36
34
3335
36 3725
29
2803
30
3126
2724 23
50
49
47
62
4346
4842
3940
4144
3940 41
54
58
62
5852
54
57
54
58
53
54
59
6061
6031
595731
6361
6058
5655
14
64 65
15
15
56
55
15
19
17
18
6321
22
16
2013
05
03
07 0408
0102
08 0407
0305
06
06
101
112
38
09
5245
6968
70
1/
MADE IN TAIWAN
TREADMILL MODEL NUMBER - S1/S2
SERIAL NUMBER :