▲ S1D DOOR LOCK Features DESCRIPTION OF LANDING DOOR LOCKING DEVICE The door locking device consists of two parts, the locking housing and the receiving contact. The locking takes place by a hole in the side of the landing door. The housing has a metal base an is covered with fibreglass reinforced plastic. The sides are fitted with orange clear covers so contacts can be inspected without removing any covers. Also is it possible to open the lock by means of a triangular key according annex B of the NEN-EN 81/12. The lock can be used for hinged landing doors. Test of ability to break circuit In accordance with 60947-5-1 a circuit was made with a resistor and choke in series. Circuit Test voltage 242 VAC Test current 2,75 A Cos 0,7=45º Resistor 4 Light bulbs 230 V 200 W Choke 200 mH(3 A) S1D STAHL DOOR LOCK FOR STAHL, SCHINDLER- PEIGNEN B60, SCHINDLER-PEIGNEN B70-B68 DOORS Ec type-Examination Certificate, test report belonging to EC type exam NL 03-400-1002-04101 / Liftinstituut and technical instruction put at the disposal of the buyer ● Compatible with all functions and dimensions of the old S1D door lock ● The screw spacing is exactly the old S1D door lock ● No work on frame or door leaf is required. Installation 1:1 ● door lock switch with two contacts possible ● actuation by screwed on roller lever ● connection cabel 1 meter