S Commands · • showinterfacebridge-domaindetail, page 522 • showipinterfacebridge-domain, page 523 Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 14 S Commands

S Commands

• sampling-rate, page 25

• schedule, page 26

• scheduler, page 27

• scheduling, page 28

• scope, page 29

• scvmm, page 31

• second-file, page 32

• security-domain, page 33

• security, page 34

• security allow-promiscuous, page 35

• security forged-transmits, page 36

• security mac-changes, page 37

• send-community, page 38

• server, page 39

• service-policy, page 42

• service, page 47

• session-record-flags, page 48

• set, page 49

• set burst, page 52

• set cir, page 53

• set community, page 54

• set conform-cos-transmit, page 61

• set conform-dscp-transmit, page 62

• set conform, page 63

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 1

• set dampening, page 64

• set dscp-code, page 69

• set dscp, page 70

• set exceed-cos-transmit, page 71

• set exceed-dscp-transmit, page 72

• set exceed, page 73

• set excessive-burst, page 74

• set local-preference, page 75

• set metric-type, page 79

• set metric, page 83

• set mode, page 87

• set next-hop, page 88

• set pir, page 92

• set qos-class, page 93

• set tag, page 95

• set target-dscp, page 99

• set type, page 100

• set violate-cos-transmit, page 101

• set violate-dscp-transmit, page 102

• set violate, page 103

• set weight, page 104

• shellinabox, page 108

• show aaa authentication, page 109

• show aaa groups, page 110

• show access-list, page 111

• show accounting log, page 112

• show acllog deny l2 flow, page 113

• show acllog deny l2 flow tenant vrf, page 114

• show acllog deny l2 flow tenant vrf detail, page 115

• show acllog deny l2 pkt, page 116

• show acllog deny l2 pkt tenant vrf, page 117

• show acllog deny l2 pkt tenant vrf detail, page 118

• show acllog deny l3 flow, page 119

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)2

S Commands

• show acllog deny l3 flow tenant vrf, page 120

• show acllog deny l3 flow tenant vrf detail, page 121

• show acllog deny l3 pkt, page 122

• show acllog deny l3 pkt tenant vrf, page 123

• show acllog deny l3 pkt tenant vrf detail, page 124

• show acllog permit l2 flow tenant vrf, page 126

• show acllog permit l2 flow tenant vrf detail, page 127

• show acllog permit l2 pkt tenant vrf, page 128

• show acllog permit l2 pkt tenant vrf detail, page 129

• show acllog permit l3 flow tenant vrf, page 130

• show acllog permit l3 flow tenant vrf detail, page 131

• show acllog permit l3 pkt tenant vrf, page 132

• show acllog permit l3 pkt tenant vrf detail, page 133

• show analytics, page 135

• show application, page 136

• show audits, page 137

• show audits tenant, page 138

• show audits tenant application, page 139

• show audits tenant application epg, page 140

• show audits tenant bridge-domain, page 141

• show audits tenant bridge-domain detail, page 142

• show audits tenant interface bridge-domain, page 143

• show audits tenant interface bridge-domain detail, page 144

• show audits tenant multicast-route-maps, page 145

• show audits tenant vrf, page 146

• show audits tenant vrf acllog l2, page 147

• show audits tenant vrf acllog l3, page 148

• show audits tenant vrf detail, page 150

• show audits tenant vrf external-l3 bgp, page 151

• show audits tenant vrf external-l3 bgp node, page 152

• show audits tenant vrf external-l3 eigrp, page 153

• show audits tenant vrf external-l3 eigrp detail, page 154

• show audits tenant vrf external-l3 epg, page 155


S Commands

• show audits tenant vrf external-l3 epg detail, page 156

• show audits tenant vrf external-l3 epg name, page 157

• show audits tenant vrf external-l3 epg name detail, page 158

• show audits tenant vrf external-l3 interfaces, page 159

• show audits tenant vrf external-l3 interfaces detail, page 160

• show audits tenant vrf external-l3 ospf, page 161

• show audits tenant vrf external-l3 ospf detail, page 162

• show audits tenant vrf external-l3 static-route, page 163

• show audits tenant vrf external-l3 static-route detail, page 164

• show audits tenant vrf external-l3 static-route node, page 165

• show audits tenant vrf external-l3 static-route node detail, page 166

• show audits tenant vrf multicast, page 167

• show bridge-domain, page 168

• show bridge-domain detail, page 169

• show callhome, page 170

• show callhome common destination-profile, page 171

• show callhome common query-profile, page 172

• show callhome common transport-email, page 173

• show catalog, page 174

• show cli command, page 175

• show cli internal audit, page 176

• show cli internal transaction, page 177

• show cli internal usage, page 178

• show cli list, page 179

• show cli manpage, page 180

• show cli path, page 181

• show clock, page 182

• show communication ciphers, page 183

• show communication controller, page 184

• show communication http, page 185

• show communication https, page 186

• show communication shellinabox, page 187

• show communication ssh-service, page 188


S Commands

• show communication telnet, page 189

• show communication web-requests, page 190

• show contract-type, page 191

• show contract, page 192

• show controller, page 193

• show controller detail, page 194

• show cores, page 195

• show cores status, page 196

• show debug counter, page 197

• show debug log, page 198

• show deployment endpoint node, page 199

• show dns-address, page 200

• show dns-domain, page 201

• show dot1q-tunnel, page 202

• show endpoints, page 203

• show endpoints leaf interface ethernet, page 204

• show endpoints leaf interface port-channel, page 205

• show endpoints vpc, page 206

• show epg, page 207

• show epg detail, page 208

• show events, page 209

• show events controller, page 210

• show events controller detail, page 211

• show events leaf, page 212

• show events leaf fex, page 213

• show events leaf fex module, page 214

• show events leaf interface ethernet, page 215

• show events leaf interface l3instance, page 216

• show events leaf interface mgmt, page 217

• show events leaf interface portchannel, page 218

• show events leaf interface tunnel, page 219

• show events leaf inventory chassis, page 220

• show events leaf inventory fans, page 221


S Commands

• show events leaf inventory module, page 222

• show events leaf inventory module fabricport, page 223

• show events leaf inventory module leafport, page 224

• show events leaf inventory powersupply, page 225

• show events leaf inventory supervisor, page 226

• show events leaf protocol, page 227

• show events leaf vpc, page 228

• show events leaf vrf, page 229

• show events spine, page 230

• show events spine interface ethernet, page 231

• show events spine interface l3instance, page 232

• show events spine interface mgmt, page 233

• show events spine interface tunnel, page 234

• show events spine inventory chassis, page 235

• show events spine inventory fabric, page 236

• show events spine inventory fans, page 237

• show events spine inventory module, page 238

• show events spine inventory module fabricport, page 239

• show events spine inventory powersupply, page 240

• show events spine inventory supervisor, page 241

• show events spine inventory system, page 242

• show events spine protocol, page 243

• show events spine vrf, page 244

• show events tenant, page 245

• show events tenant application, page 246

• show events tenant application epg, page 247

• show events tenant bridge-domain, page 248

• show events tenant bridge-domain detail, page 249

• show events tenant endpoints, page 250

• show events tenant endpoints leaf interface ethernet, page 251

• show events tenant endpoints leaf interface port-channel, page 252

• show events tenant endpoints vpc, page 253

• show events tenant interface bridge-domain, page 255


S Commands

• show events tenant interface bridge-domain detail, page 256

• show events tenant multicast-route-maps, page 257

• show events tenant vrf, page 258

• show events tenant vrf acllog l2, page 259

• show events tenant vrf acllog l3, page 260

• show events tenant vrf detail, page 262

• show events tenant vrf external-l3 bgp, page 263

• show events tenant vrf external-l3 bgp node, page 264

• show events tenant vrf external-l3 eigrp, page 265

• show events tenant vrf external-l3 eigrp detail, page 266

• show events tenant vrf external-l3 epg, page 267

• show events tenant vrf external-l3 epg detail, page 268

• show events tenant vrf external-l3 epg name, page 269

• show events tenant vrf external-l3 epg name detail, page 270

• show events tenant vrf external-l3 interfaces, page 271

• show events tenant vrf external-l3 interfaces detail, page 272

• show events tenant vrf external-l3 ospf, page 273

• show events tenant vrf external-l3 ospf detail, page 274

• show events tenant vrf external-l3 route-map, page 275

• show events tenant vrf external-l3 route-map detail, page 276

• show events tenant vrf external-l3 static-route, page 277

• show events tenant vrf external-l3 static-route detail, page 278

• show events tenant vrf external-l3 static-route node, page 279

• show events tenant vrf external-l3 static-route node detail, page 280

• show events tenant vrf multicast, page 281

• show external-l2 epg, page 282

• show external-l2 epg name, page 283

• show external-l2 epg tenant, page 284

• show external-l3 bgp, page 285

• show external-l3 bgp tenant, page 286

• show external-l3 bgp tenant vrf, page 287

• show external-l3 bgp tenant vrf node, page 288

• show external-l3 eigrp, page 289


S Commands

• show external-l3 eigrp detail, page 290

• show external-l3 eigrp node, page 291

• show external-l3 eigrp node detail, page 292

• show external-l3 eigrp tenant, page 293

• show external-l3 eigrp tenant detail, page 294

• show external-l3 eigrp tenant vrf, page 295

• show external-l3 eigrp tenant vrf detail, page 296

• show external-l3 eigrp tenant vrf node, page 297

• show external-l3 eigrp tenant vrf node detail, page 298

• show external-l3 epg, page 299

• show external-l3 epg detail, page 300

• show external-l3 epg name, page 301

• show external-l3 epg name detail, page 302

• show external-l3 epg tenant, page 303

• show external-l3 epg tenant detail, page 304

• show external-l3 epg tenant vrf, page 305

• show external-l3 epg tenant vrf detail, page 306

• show external-l3 interfaces, page 307

• show external-l3 interfaces detail, page 308

• show external-l3 interfaces node, page 309

• show external-l3 interfaces node detail, page 310

• show external-l3 interfaces tenant, page 311

• show external-l3 interfaces tenant detail, page 312

• show external-l3 interfaces tenant vrf, page 313

• show external-l3 interfaces tenant vrf detail, page 314

• show external-l3 interfaces tenant vrf node, page 315

• show external-l3 interfaces tenant vrf node detail, page 316

• show external-l3 ospf, page 317

• show external-l3 ospf detail, page 318

• show external-l3 ospf node, page 319

• show external-l3 ospf node detail, page 320

• show external-l3 ospf tenant, page 321

• show external-l3 ospf tenant detail, page 322


S Commands

• show external-l3 ospf tenant vrf, page 323

• show external-l3 ospf tenant vrf detail, page 324

• show external-l3 ospf tenant vrf node, page 325

• show external-l3 ospf tenant vrf node detail, page 326

• show external-l3 route-map, page 327

• show external-l3 route-map detail, page 328

• show external-l3 route-map name, page 329

• show external-l3 route-map name detail, page 330

• show external-l3 route-map tenant, page 331

• show external-l3 route-map tenant detail, page 332

• show external-l3 route-map tenant vrf, page 333

• show external-l3 route-map tenant vrf detail, page 334

• show external-l3 route-map tenant vrf node, page 335

• show external-l3 route-map tenant vrf node detail, page 336

• show external-l3 static-route, page 337

• show external-l3 static-route detail, page 338

• show external-l3 static-route node, page 339

• show external-l3 static-route node detail, page 340

• show external-l3 static-route tenant, page 341

• show external-l3 static-route tenant detail, page 342

• show external-l3 static-route tenant vrf, page 343

• show external-l3 static-route tenant vrf detail, page 344

• show external-l3 static-route tenant vrf node, page 345

• show external-l3 static-route tenant vrf node detail, page 346

• show fabric-recovery status, page 347

• show faults, page 348

• show faults controller, page 350

• show faults controller detail, page 351

• show faults l4l7-cluster, page 352

• show faults l4l7-graph, page 353

• show faults leaf, page 354

• show faults leaf fex, page 355

• show faults leaf fex module, page 356


S Commands

• show faults leaf interface ethernet, page 357

• show faults leaf interface l3instance, page 358

• show faults leaf interface mgmt, page 359

• show faults leaf interface portchannel, page 360

• show faults leaf interface tunnel, page 361

• show faults leaf inventory chassis, page 362

• show faults leaf inventory fans, page 363

• show faults leaf inventory module, page 364

• show faults leaf inventory module fabricport, page 365

• show faults leaf inventory module leafport, page 366

• show faults leaf inventory powersupply, page 367

• show faults leaf inventory supervisor, page 368

• show faults leaf protocol, page 369

• show faults leaf vpc, page 370

• show faults leaf vrf, page 371

• show faults microsoft domain, page 372

• show faults microsoft domain name, page 373

• show faults microsoft domain name hyperv, page 374

• show faults microsoft domain name port-group, page 375

• show faults microsoft domain name scvmm, page 376

• show faults microsoft domain name vm, page 377

• show faults microsoft domain name vm name, page 378

• show faults spine, page 379

• show faults spine interface ethernet, page 380

• show faults spine interface l3instance, page 381

• show faults spine interface mgmt, page 382

• show faults spine interface tunnel, page 383

• show faults spine inventory chassis, page 384

• show faults spine inventory fabric, page 385

• show faults spine inventory fans, page 386

• show faults spine inventory module, page 387

• show faults spine inventory module fabricport, page 388

• show faults spine inventory powersupply, page 389


S Commands

• show faults spine inventory supervisor, page 390

• show faults spine inventory system, page 391

• show faults spine protocol, page 392

• show faults spine vrf, page 393

• show faults tenant, page 394

• show faults tenant application, page 395

• show faults tenant application epg, page 396

• show faults tenant bridge-domain, page 397

• show faults tenant bridge-domain detail, page 398

• show faults tenant interface bridge-domain, page 399

• show faults tenant interface bridge-domain detail, page 400

• show faults tenant multicast-route-maps, page 401

• show faults tenant vrf, page 402

• show faults tenant vrf acllog l2, page 403

• show faults tenant vrf acllog l3, page 404

• show faults tenant vrf detail, page 406

• show faults tenant vrf external-l3 bgp, page 407

• show faults tenant vrf external-l3 bgp node, page 408

• show faults tenant vrf external-l3 eigrp, page 409

• show faults tenant vrf external-l3 eigrp detail, page 410

• show faults tenant vrf external-l3 epg, page 411

• show faults tenant vrf external-l3 epg detail, page 412

• show faults tenant vrf external-l3 epg name, page 413

• show faults tenant vrf external-l3 epg name detail, page 414

• show faults tenant vrf external-l3 interfaces, page 415

• show faults tenant vrf external-l3 interfaces detail, page 416

• show faults tenant vrf external-l3 ospf, page 417

• show faults tenant vrf external-l3 ospf detail, page 418

• show faults tenant vrf external-l3 static-route, page 419

• show faults tenant vrf external-l3 static-route detail, page 420

• show faults tenant vrf external-l3 static-route node, page 421

• show faults tenant vrf external-l3 static-route node detail, page 422

• show faults tenant vrf multicast, page 423


S Commands

• show faults vmware domain, page 424

• show faults vmware domain name, page 425

• show faults vmware domain name epg, page 426

• show faults vmware domain name esx, page 427

• show faults vmware domain name port-group, page 428

• show faults vmware domain name trunk-portgroup, page 429

• show faults vmware domain name vcenter, page 430

• show faults vmware domain name vm, page 431

• show faults vmware domain name vm name, page 432

• show fips, page 433

• show firmware repository, page 434

• show firmware repository detail, page 435

• show firmware upgrade status, page 436

• show firmware upgrade status controller-group, page 437

• show firmware upgrade status controller-group detail, page 438

• show firmware upgrade status detail, page 439

• show firmware upgrade status switch-group, page 440

• show firmware upgrade status switch-group detail, page 441

• show flow exporter, page 442

• show flow exporter infra, page 443

• show flow exporter tenant, page 444

• show flow monitor, page 445

• show flow monitor infra, page 446

• show flow monitor tenant, page 447

• show flow node-policy, page 448

• show flow node-policy detail, page 449

• show flow record, page 450

• show flow record infra, page 451

• show flow record tenant, page 452

• show flow vm-exporter, page 453

• show health, page 454

• show health leaf, page 455

• show health leaf fex, page 456


S Commands

• show health leaf fex module, page 457

• show health leaf interface ethernet, page 458

• show health leaf interface l3instance, page 459

• show health leaf interface mgmt, page 460

• show health leaf interface portchannel, page 461

• show health leaf interface tunnel, page 462

• show health leaf inventory chassis, page 463

• show health leaf inventory fans, page 464

• show health leaf inventory module, page 465

• show health leaf inventory module fabricport, page 466

• show health leaf inventory module leafport, page 467

• show health leaf inventory powersupply, page 468

• show health leaf inventory supervisor, page 469

• show health leaf protocol, page 470

• show health leaf vpc, page 471

• show health leaf vrf, page 472

• show health spine, page 473

• show health spine interface ethernet, page 474

• show health spine interface l3instance, page 475

• show health spine interface mgmt, page 476

• show health spine interface tunnel, page 477

• show health spine inventory chassis, page 478

• show health spine inventory fabric, page 479

• show health spine inventory fans, page 480

• show health spine inventory module, page 481

• show health spine inventory module fabricport, page 482

• show health spine inventory powersupply, page 483

• show health spine inventory supervisor, page 484

• show health spine inventory system, page 485

• show health spine protocol, page 486

• show health spine vrf, page 487

• show health tenant, page 488

• show health tenant application, page 489


S Commands

• show health tenant application epg, page 490

• show health tenant bridge-domain, page 491

• show health tenant bridge-domain detail, page 492

• show health tenant interface bridge-domain, page 493

• show health tenant interface bridge-domain detail, page 494

• show health tenant multicast-route-maps, page 495

• show health tenant vrf, page 496

• show health tenant vrf acllog l2, page 497

• show health tenant vrf acllog l3, page 498

• show health tenant vrf detail, page 500

• show health tenant vrf external-l3 bgp, page 501

• show health tenant vrf external-l3 bgp node, page 502

• show health tenant vrf external-l3 eigrp, page 503

• show health tenant vrf external-l3 eigrp detail, page 504

• show health tenant vrf external-l3 epg, page 505

• show health tenant vrf external-l3 epg detail, page 506

• show health tenant vrf external-l3 epg name, page 507

• show health tenant vrf external-l3 epg name detail, page 508

• show health tenant vrf external-l3 interfaces, page 509

• show health tenant vrf external-l3 interfaces detail, page 510

• show health tenant vrf external-l3 ospf, page 511

• show health tenant vrf external-l3 ospf detail, page 512

• show health tenant vrf external-l3 static-route, page 513

• show health tenant vrf external-l3 static-route detail, page 514

• show health tenant vrf external-l3 static-route node, page 515

• show health tenant vrf external-l3 static-route node detail, page 516

• show health tenant vrf multicast, page 517

• show inband-mgmt, page 518

• show inband-mgmt controller, page 519

• show inband-mgmt switch, page 520

• show interface bridge-domain, page 521

• show interface bridge-domain detail, page 522

• show ip interface bridge-domain, page 523


S Commands

• show ipv6 interface bridge-domain, page 524

• show l4l7-cluster, page 525

• show l4l7-graph, page 526

• show l4l7-package, page 527

• show ldap-server, page 528

• show locator-led, page 529

• show locator-led status leaf, page 530

• show microsoft domain, page 531

• show microsoft domain name, page 532

• show microsoft domain name hyperv, page 533

• show microsoft domain name port-group, page 534

• show microsoft domain name scvmm, page 535

• show microsoft domain name vm, page 536

• show microsoft domain name vm name, page 537

• show microsoft vm, page 538

• show monitor access, page 539

• show monitor fabric, page 540

• show monitor tenant, page 541

• show monitor virtual, page 542

• show name-alias tenant, page 543

• show name-alias tenant acl, page 544

• show name-alias tenant application, page 545

• show name-alias tenant application epg, page 546

• show name-alias tenant bridge-domain, page 547

• show name-alias tenant contract, page 548

• show name-alias tenant contract subject, page 549

• show name-alias tenant l3out, page 550

• show name-alias tenant vrf, page 551

• show ntpq, page 552

• show oob-mgmt, page 553

• show oob-mgmt controller, page 554

• show oob-mgmt switch, page 555

• show policy-map, page 556


S Commands

• show policy-map type data-plane, page 557

• show policy-map type qos, page 558

• show port-channel leaf, page 559

• show port-channel map, page 560

• show port-channel map leaf, page 561

• show radius-server, page 562

• show resource, page 563

• show resource conflict encap-vlan epg, page 564

• show resource conflict encap-vlan epg node, page 565

• show role, page 566

• show running-config, page 567

• show sessions, page 568

• show sessions controller, page 569

• show sessions controller detail, page 570

• show sessions leaf, page 571

• show sessions spine, page 572

• show snapshot active, page 573

• show snapshot files, page 574

• show snapshot jobs, page 575

• show snmp, page 576

• show snmp clientgroups, page 577

• show snmp community, page 578

• show snmp engineid, page 579

• show snmp hosts, page 580

• show snmp summary, page 581

• show snmp users, page 582

• show stats, page 583

• show stats granularity communication controller, page 584

• show stats granularity leaf, page 585

• show stats granularity leaf fex, page 586

• show stats granularity leaf fex module, page 587

• show stats granularity leaf interface ethernet, page 588

• show stats granularity leaf interface mgmt, page 589


S Commands

• show stats granularity leaf interface portchannel, page 590

• show stats granularity leaf inventory chassis, page 591

• show stats granularity leaf inventory fans, page 592

• show stats granularity leaf inventory powersupply, page 593

• show stats granularity leaf inventory supervisor, page 594

• show stats granularity spine, page 595

• show stats granularity spine interface ethernet, page 596

• show stats granularity spine interface mgmt, page 597

• show stats granularity spine inventory chassis, page 598

• show stats granularity spine inventory fabric, page 599

• show stats granularity spine inventory fans, page 600

• show stats granularity spine inventory module, page 601

• show stats granularity spine inventory powersupply, page 602

• show stats granularity spine inventory supervisor, page 603

• show stats granularity spine inventory system, page 604

• show stats granularity tenant, page 605

• show stats granularity tenant application, page 606

• show stats granularity tenant application epg, page 607

• show stats granularity tenant dot1q-tunnel, page 608

• show stats granularity tenant multicast-route-maps, page 609

• show stats granularity tenant vrf, page 610

• show stats granularity tenant vrf acllog l2, page 611

• show stats granularity tenant vrf acllog l3, page 612

• show stats granularity tenant vrf detail, page 613

• show stats granularity tenant vrf external-l3 bgp, page 614

• show stats granularity tenant vrf external-l3 bgp node, page 615

• show stats granularity tenant vrf external-l3 eigrp, page 616

• show stats granularity tenant vrf external-l3 eigrp detail, page 617

• show stats granularity tenant vrf external-l3 epg, page 618

• show stats granularity tenant vrf external-l3 epg detail, page 619

• show stats granularity tenant vrf external-l3 epg name, page 620

• show stats granularity tenant vrf external-l3 epg name detail, page 621

• show stats granularity tenant vrf external-l3 interfaces, page 622


S Commands

• show stats granularity tenant vrf external-l3 interfaces detail, page 623

• show stats granularity tenant vrf external-l3 ospf, page 624

• show stats granularity tenant vrf external-l3 ospf detail, page 625

• show stats granularity tenant vrf external-l3 static-route, page 626

• show stats granularity tenant vrf external-l3 static-route detail, page 627

• show stats granularity tenant vrf external-l3 static-route node, page 628

• show stats granularity tenant vrf external-l3 static-route node detail, page 629

• show stats granularity tenant vrf multicast, page 630

• show switch, page 631

• show switch detail, page 632

• show tacacs-server, page 633

• show techsupport all, page 634

• show techsupport controllers, page 635

• show techsupport host, page 636

• show techsupport switch, page 637

• show tenant, page 638

• show tenant access-list, page 639

• show tenant application, page 640

• show tenant application endpoints, page 641

• show tenant application endpoints leaf interface ethernet, page 642

• show tenant application endpoints leaf interface port-channel, page 643

• show tenant application endpoints vpc, page 644

• show tenant application epg, page 645

• show tenant application epg detail, page 646

• show tenant application epg endpoints, page 647

• show tenant application epg endpoints leaf interface ethernet, page 648

• show tenant application epg endpoints leaf interface port-channel, page 649

• show tenant application epg endpoints vpc, page 650

• show tenant bridge-domain, page 652

• show tenant bridge-domain detail, page 653

• show tenant contract-type, page 654

• show tenant contract, page 655

• show tenant detail, page 656


S Commands

• show tenant dot1q-tunnel, page 657

• show tenant endpoints, page 658

• show tenant endpoints leaf interface ethernet, page 659

• show tenant endpoints leaf interface port-channel, page 660

• show tenant endpoints vpc, page 661

• show tenant epg, page 662

• show tenant epg detail, page 663

• show tenant external-l2 epg, page 664

• show tenant interface bridge-domain, page 665

• show tenant interface bridge-domain detail, page 666

• show tenant ip interface bridge-domain, page 667

• show tenant ipv6 interface bridge-domain, page 668

• show tenant multicast-route-maps, page 669

• show tenant policy-map, page 670

• show tenant policy-map type data-plane, page 671

• show tenant policy-map type qos, page 672

• show tenant vrf, page 673

• show tenant vrf acllog l2, page 674

• show tenant vrf acllog l3, page 675

• show tenant vrf detail, page 676

• show tenant vrf external-l3 bgp, page 677

• show tenant vrf external-l3 bgp node, page 678

• show tenant vrf external-l3 eigrp, page 679

• show tenant vrf external-l3 eigrp detail, page 680

• show tenant vrf external-l3 epg, page 681

• show tenant vrf external-l3 epg detail, page 682

• show tenant vrf external-l3 epg name, page 683

• show tenant vrf external-l3 epg name detail, page 684

• show tenant vrf external-l3 interfaces, page 685

• show tenant vrf external-l3 interfaces detail, page 686

• show tenant vrf external-l3 ospf, page 687

• show tenant vrf external-l3 ospf detail, page 688

• show tenant vrf external-l3 route-map, page 689


S Commands

• show tenant vrf external-l3 route-map detail, page 690

• show tenant vrf external-l3 static-route, page 691

• show tenant vrf external-l3 static-route detail, page 692

• show tenant vrf external-l3 static-route node, page 693

• show tenant vrf external-l3 static-route node detail, page 694

• show tenant vrf multicast, page 695

• show troubleshoot epext session, page 696

• show troubleshoot epext session atomiccounter, page 697

• show troubleshoot epext session audit, page 698

• show troubleshoot epext session contracts, page 699

• show troubleshoot epext session deployments, page 700

• show troubleshoot epext session events, page 701

• show troubleshoot epext session faults, page 702

• show troubleshoot epext session monitor, page 703

• show troubleshoot epext session reports, page 704

• show troubleshoot epext session statistics, page 705

• show troubleshoot epext session topology, page 706

• show troubleshoot epext session traceroute, page 707

• show troubleshoot epext sessions, page 708

• show troubleshoot eptoep session, page 709

• show troubleshoot eptoep session atomiccounter, page 710

• show troubleshoot eptoep session audit, page 711

• show troubleshoot eptoep session contracts, page 712

• show troubleshoot eptoep session deployments, page 713

• show troubleshoot eptoep session events, page 714

• show troubleshoot eptoep session faults, page 715

• show troubleshoot eptoep session monitor, page 716

• show troubleshoot eptoep session reports, page 717

• show troubleshoot eptoep session statistics, page 718

• show troubleshoot eptoep session topology, page 719

• show troubleshoot eptoep session traceroute, page 720

• show troubleshoot eptoep sessions, page 721

• show username, page 722


S Commands

• show username detail, page 723

• show version, page 724

• show vlan-domain, page 725

• show vmm internal debug, page 726

• show vmm internal debug epg, page 727

• show vmm internal debug mac, page 728

• show vmware domain, page 729

• show vmware domain name, page 730

• show vmware domain name epg, page 731

• show vmware domain name esx, page 732

• show vmware domain name port-group, page 733

• show vmware domain name trunk-portgroup, page 734

• show vmware domain name vcenter, page 735

• show vmware domain name vm, page 736

• show vmware domain name vm name, page 737

• show vmware vm, page 738

• show vpc, page 739

• show vpc map leaf, page 740

• show vrf, page 741

• show vrf detail, page 742

• show vsan-domain, page 743

• shut, page 744

• shutdown, page 745

• site-id, page 749

• slow-drain congestion-timeout action, page 750

• slow-drain congestion-timeout count, page 753

• slow-drain pause, page 756

• slow-timer, page 759

• snapshot download, page 760

• snapshot export, page 761

• snapshot import, page 762

• snapshot rollback, page 763

• snapshot upload, page 764


S Commands

• snmp-server clientgroup, page 765

• snmp-server community, page 766

• snmp-server contact, page 767

• snmp-server host, page 768

• snmp-server location, page 769

• snmp-server protocol, page 770

• snmp-server user, page 771

• source, page 772

• source application, page 774

• source interface ethernet, page 775

• source interface port-channel, page 776

• source interface vpc, page 777

• spanning-tree, page 778

• spanning-tree bpdu-filter, page 782

• spanning-tree bpdu-guard, page 783

• speed, page 784

• spf-interval, page 787

• spine-group, page 788

• spine-interface-group, page 789

• spine-interface-policy-group, page 790

• spine-interface-profile, page 792

• spine-profile, page 793

• spine, page 794

• ssh-key, page 795

• ssh-service, page 796

• ssl-protocols, page 797

• ssl-validation-level, page 798

• state, page 799

• static-endpoint, page 800

• static-tep, page 804

• statistics, page 808

• storm-control level, page 809

• storm-control pps, page 812


S Commands

• street-address, page 815

• subject, page 816

• subnet, page 817

• summary-address, page 818

• svcredir-pol, page 819

• switch-group, page 820

• switch, page 821

• switching, page 822

• switchport, page 823

• switchport access vlan tenant application, page 825

• switchport access vlan tenant external-svi, page 829

• switchport mode, page 832

• switchport port-security maximum, page 836

• switchport port-security violation, page 839

• switchport tenant, page 842

• switchport trunk allowed vlan inband-mgmt, page 845

• switchport trunk allowed vlan tenant application, page 846

• switchport trunk allowed vlan tenant external-l2, page 850

• switchport trunk allowed vlan tenant external-svi, page 853

• switchport trunk allowed vlan tenant legacy-forwarding, page 856

• switchport trunk allowed vsan tenant application, page 859

• switchport trunk native vlan tenant application, page 862

• switchport trunk native vlan tenant external-svi, page 866

• switchport vlan, page 869

• switchport vsan, page 872

• switchport vsan tenant application, page 875

• syslog, page 876

• system cluster-size, page 877

• system controller-id, page 878

• system dynamic-load-balance, page 879

• system fabric-security-mode, page 880

• system jumbomtu, page 881

• system pod, page 882


S Commands

• system switch-id, page 883

• system use-infra-gipo, page 884


S Commands

sampling-ratesampling-rate <samplingRate>

Description: Configure Sampling Rate

Syntax:

Configure Sampling Rate. Number range from=0 to=1000samplingRate

Command Mode: flow exporter : Configure NetFlow Exporter Policy

Command Path:

# configure [['terminal', 't']](config)# vmware-domain <WORD> [delimiter <WORD>](config-vmware)# configure-dvs(config-vmware-dvs)# flow exporter <WORD>(config-vmware-dvs-flow-exporter)# sampling-rate <samplingRate>


S Commandssampling-rate

scheduleschedule <WORD>

Description: Assign a scheduler

Syntax:

scheduler name (Max Size 64)WORD

Command Mode: switch-group : Create switch firmware upgrade policy

Command Path:

# configure [['terminal', 't']](config)# firmware(config-firmware)# switch-group <WORD>(config-firmware-switch)# schedule <WORD>

schedule <WORD>

Description: Schedule snapshot export

Syntax:

Scheduler nameWORD

Command Mode: snapshot export : Configuration export setup mode

Command Path:

# configure [['terminal', 't']](config)# snapshot export <WORD>(config-export)# schedule <WORD>


S Commandsschedule

schedulerscheduler pause

Description: Pause maintenance policy scheduler

Syntax:

Pause maintenance policy schedulerpause


Command Path:

# configure [['terminal', 't']](config)# firmware(config-firmware)# switch-group <WORD>(config-firmware-switch)# scheduler pause

scheduler fabric|controller schedule <WORD>

Description: Scheduler configuration mode

Syntax:

Fabric schedulesfabric

Controller schedulescontroller

Configure a scheduleschedule

Schedule name (Max size 64)WORD

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']](config)# scheduler fabric|controller schedule <WORD>


S Commandsscheduler

schedulingscheduling <WORD>

Description: Set the scheduling algorithm

Syntax:

Algorithm to chooseWORD

Command Mode: qos parameters : Configure the global QOS policies

Command Path:

# configure [['terminal', 't']](config)# qos parameters level1|level2|level3(config-qos)# scheduling <WORD>


S Commandsscheduling

scopescope <WORD>

Description: Specify the scope for the contract

Syntax:

Contract ScopeWORD

Command Mode: contract : Configure binary contracts between Application EPGs

Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# contract <WORD> [type <type>](config-tenant-contract)# scope <WORD>

scope combinable

Description: Set route-profile scope

Syntax:

combinablecombinable

Command Mode: template route-profile : Configure route-profile template under VRF/L3Out forbridge-domain export

Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# template route-profile <WORD> <WORD> <NUMBER>(config-leaf-vrf-template-route-profile)# scope combinable

scope global

Description: Set scope

Syntax:

Route-map will be available for use on all nodes in this tenant and vrfglobal

Command Mode: route-map : Create route-map or enter route-map command mode

Command Path:

# configure [['terminal', 't']]


S Commandsscope

(config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# scope global

scope combinable

Description: Set route-profile scope

Syntax:

combinablecombinable


Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# template route-profile <WORD> <WORD> <NUMBER>(config-leaf-vrf-template-route-profile)# scope combinable

scope global

Description: Set scope

Syntax:

Route-map will be available for use on all nodes in this tenant and vrfglobal

Command Mode: route-map : Create route-map or enter route-map command mode

Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# scope global


S Commandsscope

scvmmscvmm <arg> cloud <WORD> [name <name>]

Description: Configure an SCVMM in the Microsoft domain

Syntax:

arg

Cloud namecloud

Cloud Name (Max Size 512)WORD

(Optional) SCVMM Controller Namename

Command Mode: microsoft-domain : Create a VMMMicrosoft Domain

Command Path:

# configure [['terminal', 't']](config)# microsoft-domain <WORD> [delimiter <WORD>](config-microsoft)# scvmm <> cloud <WORD> [name <name>]


S Commandsscvmm

second-filesecond-file <FILENAME>

Description: Second snapshot file name

Syntax:

Second snapshot file nameFILENAME

Command Mode: snapshot rollback : Configuration rollback setup mode

Command Path:

# configure [['terminal', 't']](config)# snapshot rollback <WORD>(config-rollback)# second-file <FILENAME>


S Commandssecond-file

security-domainsecurity-domain <WORD>

Description: Add security domain

Syntax:

Security-domain nameWORD

Command Mode: vlan-domain : Configure vlan domain

Command Path:

# configure [['terminal', 't']](config)# vlan-domain <name> [dynamic] [type <domain-type>](config-vlan)# security-domain <WORD>

security-domain <WORD>

Description: Add a security domain to this VMware domain

Syntax:

Security domain name (Max Size 64)WORD

Command Mode: vmware-domain : Create a VMM VMWare Domain

Command Path:

# configure [['terminal', 't']](config)# vmware-domain <WORD> [delimiter <WORD>](config-vmware)# security-domain <WORD>


S Commandssecurity-domain

securitysecurity domain <WORD>

Description: Add a security domain to the tenant

Syntax:

Domaindomain

Security domain name (Max Size None)WORD

Command Mode: tenant : Tenant configuration mode

Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# security domain <WORD>


S Commandssecurity

security allow-promiscuoussecurity allow-promiscuous <WORD>

Description: Enable/Disable promiscuous mode

Syntax:

Enable/Disable promiscuous modeWORD

Command Mode: vmware-domain : Associate EPG to a VMWare Domain

Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# application <WORD>(config-tenant-app)# epg <WORD> [type <WORD>](config-tenant-app-epg)# vmware-domain member <WORD> [encap <WORD>] [primary-encap <WORD>][allow-micro-segmentation] [deploy <WORD>] [push <WORD>] [delimiter <WORD>](config-tenant-app-epg-domain)# security allow-promiscuous <WORD>


S Commandssecurity allow-promiscuous

security forged-transmitssecurity forged-transmits <WORD>

Description: Accept/Reject Forced Transmits

Syntax:

Accept/Reject Forged TransmitsWORD


Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# application <WORD>(config-tenant-app)# epg <WORD> [type <WORD>](config-tenant-app-epg)# vmware-domain member <WORD> [encap <WORD>] [primary-encap <WORD>][allow-micro-segmentation] [deploy <WORD>] [push <WORD>] [delimiter <WORD>](config-tenant-app-epg-domain)# security forged-transmits <WORD>


S Commandssecurity forged-transmits

security mac-changessecurity mac-changes <WORD>

Description: Accept/Reject Mac Changes

Syntax:

Accept/Reject Mac ChangesWORD


Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# application <WORD>(config-tenant-app)# epg <WORD> [type <WORD>](config-tenant-app-epg)# vmware-domain member <WORD> [encap <WORD>] [primary-encap <WORD>][allow-micro-segmentation] [deploy <WORD>] [push <WORD>] [delimiter <WORD>](config-tenant-app-epg-domain)# security mac-changes <WORD>


S Commandssecurity mac-changes

send-communitysend-community [extended]

Description: Send Community attribute to this neighbor

Syntax:

(Optional) Send Extended Community attributeextended

Command Mode: neighbor : Configure a BGP neighbor

Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# router bgp <fabric-ASN>(config-leaf-bgp)# vrf member tenant <WORD> vrf <WORD>(config-leaf-bgp-vrf)# neighbor A.B.C.D|A.B.C.D/LEN|A:B::C:D|A:B::C:D/LEN [evpn] [l3out<WORD>](config-leaf-bgp-vrf-neighbor)# send-community [extended]

send-community [extended]

Description: Send Community attribute to this neighbor

Syntax:

(Optional) Send Extended Community attributeextended

Command Mode: neighbor : Configure a BGP neighbor

Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# router bgp <fabric-ASN>(config-leaf-bgp)# vrf member tenant <WORD> vrf <WORD>(config-leaf-bgp-vrf)# neighbor A.B.C.D|A.B.C.D/LEN|A:B::C:D|A:B::C:D/LEN [evpn] [l3out<WORD>](config-leaf-bgp-vrf-neighbor)# send-community [extended]


S Commandssend-community

serverserver <A.B.C.D|A:B::C:D|WORD> priority <NUMBER>

Description: Add LDAP server to LDAP group

Syntax:

LDAP server name or IP addressA.B.C.D|A:B::C:D|WORD

priority of server within grouppriority

Priority of server within group. Number range from=0 to=16<0-16>

Command Mode: aaa group server ldap : LDAP server group name.

Command Path:

# configure [['terminal', 't']](config)# aaa group server ldap <WORD>(config-ldap)# server <A.B.C.D|A:B::C:D|WORD> priority <NUMBER>

server <A.B.C.D|A:B::C:D|WORD> priority <NUMBER>

Description: Add RADIUS server to RADIUS group

Syntax:

RADIUS server name or IP addressA.B.C.D|A:B::C:D|WORD



Command Mode: aaa group server radius : RADIUS server group name.

Command Path:

# configure [['terminal', 't']](config)# aaa group server radius <WORD>(config-radius)# server <A.B.C.D|A:B::C:D|WORD> priority <NUMBER>

server <A.B.C.D|A:B::C:D|WORD> priority <NUMBER>

Description: Add TACACS PLUS server to TACACS PLUS group

Syntax:

TACACS PLUS server name or IP addressA.B.C.D|A:B::C:D|WORD


S Commandsserver



Command Mode: aaa group server tacacsplus : TACACS+ server group name.

Command Path:

# configure [['terminal', 't']](config)# aaa group server tacacsplus <WORD>(config-tacacsplus)# server <A.B.C.D|A:B::C:D|WORD> priority <NUMBER>

server <WORD> [prefer] [key <arg>] [use-vrf <arg>]

Description: Configure ntp servers for the active ntp policy

Syntax:

Server name/IP for the active ntp policy (Max Size 64)WORD

(Optional) Preferred server for the active ntp policyprefer

(Optional) Reference key id for authentication. Number range from=1to=65535

arg

(Optional) Configure management vrfarg

Command Mode: ntp : Configure the default ntp policy

Command Path:

# configure [['terminal', 't']](config)# pod <NUMBER>(config-pod)# ntp(config-ntp)# server <WORD> [prefer] [key <>] [use-vrf <>]

server <WORD> [prefer] [key <arg>] [use-vrf <arg>]

Description: Configure ntp servers for the active ntp policy

Syntax:

Server name/IP for the active ntp policy (Max Size 64)WORD

(Optional) Preferred server for the active ntp policyprefer

(Optional) Reference key id for authentication. Number range from=1to=65535

arg

(Optional) Configure management vrfarg


S Commandsserver

Command Mode: template ntp-fabric : Network Time Protocol (NTP)

Command Path:

# configure [['terminal', 't']](config)# template ntp-fabric <WORD>(config-template-ntp-fabric)# server <WORD> [prefer] [key <>] [use-vrf <>]

server <host/ipaddr> [facility <facility>] [severity <severity>] [mgmtepg <mgmtepg>] [port <port>]

Description: Add a destination server

Syntax:

The hostname or ipaddress<host/ipaddr>

(Optional) The forwarding facility level for logs generatedfacility

(Optional) The severity level for logs generatedseverity

(Optional) MgmtEndpointmgmtepg

(Optional) Service port of the remote destination. Number range from=1to=65535

port

Command Mode: logging : Logging server group configuration mode

Command Path:

# configure [['terminal', 't']](config)# logging server-group <WORD>(config-logging)# server <host/ipaddr> [facility <facility>] [severity <severity>] [mgmtepg<mgmtepg>] [port <port>]


S Commandsserver

service-policyservice-policy <WORD>

Description: Specify the QOS service policy

Syntax:

Qos Service Policy (Max Size 64)WORD

Command Mode: epg : AEPg configuration mode

Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# application <WORD>(config-tenant-app)# epg <WORD> [type <WORD>](config-tenant-app-epg)# service-policy <WORD>

service-policy <WORD>

Description: Specify the QOS service policy

Syntax:

Service policy to apply (Max Size 64)WORD

Command Mode: external-l2 : L2 external EPG creation/configuration

Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# external-l2 epg <WORD>(config-tenant-l2ext-epg)# service-policy <WORD>

service-policy type data-plane input|output <WORD>

Description: QOS service policy

Syntax:

Type of the Qos Policytype

QOS policy for Data Plane Policingdata-plane

Ingress Directioninput

Egress Directionoutput


S Commandsservice-policy

Qos Policy Name (Max Size 64)WORD

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface vlan <1-4094>(config-leaf-if)# service-policy type data-plane input|output <WORD>



Syntax:






Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface ethernet <ifRange>(config-leaf-if)# service-policy type data-plane input|output <WORD>



Syntax:








Command Mode: interface port-channel : Port Channel interface

Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# service-policy type data-plane input|output <WORD>



Syntax:






Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface vlan <1-4094>(config-leaf-if)# service-policy type data-plane input|output <WORD>



Syntax:









Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface ethernet <ifRange>(config-leaf-if)# service-policy type data-plane input|output <WORD>



Syntax:







Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# service-policy type data-plane input|output <WORD>



Syntax:






Command Mode: interface : Provide VPC Name



Command Path:

# configure [['terminal', 't']](config)# vpc context leaf <101-4000> <101-4000> [fex <fex>](config-vpc)# interface vpc <WORD> [fex <fex>](config-vpc-if)# service-policy type data-plane input|output <WORD>



serviceservice <WORD> [device-cluster-tenant <WORD>] [device-cluster <WORD>] [mode <Available Modes>][svcredir <Service Redirection>] [service-type <Service Type>]

Description: Configure L4-L7 Service

Syntax:

Service node name (Max Size 64)WORD

(Optional) Tenant name (Max Size 63)WORD

(Optional) Device cluster name (Max Size 64)WORD

(Optional) Configure service node modeAvailable Modes

(Optional) Configure service redirectionService Redirection

(Optional) Configure service node typeService Type

Command Mode: l4l7 graph : Configure L4-L7 Service Graph

Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# l4l7 graph <WORD> [contract <contract-option>](config-graph)# service <WORD> [device-cluster-tenant <WORD>] [device-cluster <WORD>] [mode<Available Modes>] [svcredir <Service Redirection>] [service-type <Service Type>]


S Commandsservice

session-record-flagssession-record-flags <sessionRecordFlags>

Description: Enable/Disable refresh in the session records, Comma separated values

Syntax:

Session record flags as comma separated values like val1,val2,..valN<sessionRecordFlags>

Command Mode: crypto webtoken : The cryptographic data used for generating and verifying web tokens.

Command Path:

# configure [['terminal', 't']](config)# crypto webtoken(config-webtoken)# session-record-flags <sessionRecordFlags>


S Commandssession-record-flags

setset qos-class <WORD>

Description: QOS level for the epg

Syntax:

QOS level for the epgqos-class

Qos LevelWORD

Command Mode: epg : AEPg configuration mode

Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# application <WORD>(config-tenant-app)# epg <WORD> [type <WORD>](config-tenant-app-epg)# set qos-class <WORD>

set qos-class <WORD>

Description: QOS level for the application

Syntax:

QOS level for the applicationqos-class

Qos LevelWORD

Command Mode: application : application configuration mode

Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# application <WORD>(config-tenant-app)# set qos-class <WORD>


Description: QOS level for the tunnel

Syntax:

QOS level for the tunnelqos-class

Qos LevelWORD


S Commandsset

Command Mode: dot1q-tunnel : Tunnel configuration mode

Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# dot1q-tunnel <WORD>(config-tenant-tunnel)#set qos-class <WORD>

set qos-class <contractQosLevel>

Description: Specify the QOS level for the epg

Syntax:

class of QOS to specifyqos-class

{unspecified|level1|level2|level3}<contractQosLevel>

Command Mode: inband-mgmt : Enter Inside In-band management mode to modify inband properties orcreate new inband

Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# inband-mgmt epg <WORD>(config-inb-epg)# set qos-class <contractQosLevel>



Syntax:

QOS level for the epgqos-class

Qos LevelWORD

Command Mode: external-l2 : L2 external EPG creation/configuration

Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# external-l2 epg <WORD>(config-tenant-l2ext-epg)# set qos-class <WORD>

set qos-class <contractQosLevel>


Syntax:


S Commandsset

class of QOS to specifyqos-class

{unspecified|level1|level2|level3}<contractQosLevel>

Command Mode: oob-mgmt : Creates/Modify the out of band mgmt under the tenant mgmt

Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# oob-mgmt epg <epgval>(config-oob-epg)# set qos-class <contractQosLevel>


S Commandsset

set burstset burst <0-549755813760> UNIT

Description: Burst Rate

Syntax:

Burst Rate<0-549755813760>

Burst Rate UnitUNIT

Command Mode: policy-map : Create a policymap of DataPlane type to police/reclassify the traffic

Command Path:

# configure [['terminal', 't']](config)# policy-map type data-plane <WORD>(config-pmap-dpp)# set burst <0-549755813760> UNIT

set burst <0-549755813760> UNIT

Description: Burst Rate

Syntax:

Burst Rate<0-549755813760>

Burst Rate UnitUNIT

Command Mode: policy-map type data-plane : data-plane policy type

Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# policy-map type data-plane <WORD>(config-tenant-pmap-dpp)# set burst <0-549755813760> UNIT


S Commandsset burst

set cirset cir <0-4398046510080> UNIT

Description: Committed Rate

Syntax:

Committed Rate<0-4398046510080>

Committed Rate UnitUNIT


Command Path:

# configure [['terminal', 't']](config)# policy-map type data-plane <WORD>(config-pmap-dpp)# set cir <0-4398046510080> UNIT

set cir <0-4398046510080> UNIT

Description: Committed Rate

Syntax:

Committed Rate<0-4398046510080>

Committed Rate UnitUNIT


Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# policy-map type data-plane <WORD>(config-tenant-pmap-dpp)# set cir <0-4398046510080> UNIT


S Commandsset cir

set communityset community regular|extended <value> additive|replace|none

Description: Set BGP community attribute

Syntax:

BGP regular communityregular

BGP extended communityextended

Community value in aa:nn formatvalue

Add to existing communityadditive

Replace existing communityreplace

Do not change communitynone

Command Mode: route-profile : Configure route-profile

Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# vrf context <WORD>(config-tenant-vrf)# route-profile <WORD>(config-tenant-vrf-route-profile)# set community regular|extended <value>additive|replace|none

set community regular|extended <value> additive|replace|none


Syntax:








S Commandsset community

CommandMode: template route-profile : Configure route-profile template under tenant for BGP dampeningand route redistribution

Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# template route-profile <WORD> tenant <WORD>(config-leaf-template-route-profile)# set community regular|extended <value>additive|replace|none



Syntax:








Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# template route-profile <WORD> <WORD> <NUMBER>(config-leaf-vrf-template-route-profile)# set community regular|extended <value>additive|replace|none



Syntax:









Command Mode: match bridge-domain : Match subnets of a bridge-domain

Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match bridge-domain <> [tenant <tenant>](config-leaf-vrf-route-map-match)# set community regular|extended <value>additive|replace|none



Syntax:







Command Mode: match prefix-list : Match entries of a prefix-list

Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match prefix-list <WORD>(config-leaf-vrf-route-map-match)# set community regular|extended <value>additive|replace|none



Syntax:









Command Mode: match route group : Route group

Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match route group <> [order <order>](config-leaf-vrf-route-map-match)# set community regular|extended <value>additive|replace|none



Syntax:








Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# template route-profile <WORD> tenant <WORD>(config-leaf-template-route-profile)# set community regular|extended <value>additive|replace|none





Syntax:








Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# template route-profile <WORD> <WORD> <NUMBER>(config-leaf-vrf-template-route-profile)# set community regular|extended <value>additive|replace|none



Syntax:








Command Path:




(config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match bridge-domain <> [tenant <tenant>](config-leaf-vrf-route-map-match)# set community regular|extended <value>additive|replace|none



Syntax:








Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match prefix-list <WORD>(config-leaf-vrf-route-map-match)# set community regular|extended <value>additive|replace|none



Syntax:










Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match route group <> [order <order>](config-leaf-vrf-route-map-match)# set community regular|extended <value>additive|replace|none



set conform-cos-transmitset conform-cos-transmit <0-6>

Description: Conform Policer Mark Cos

Syntax:

Conform Policer Mark Cos<0-6>


Command Path:

# configure [['terminal', 't']](config)# policy-map type data-plane <WORD>(config-pmap-dpp)# set conform-cos-transmit <0-6>

set conform-cos-transmit <0-6>

Description: Conform Policer Mark Cos

Syntax:

Conform Policer Mark Cos<0-6>


Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# policy-map type data-plane <WORD>(config-tenant-pmap-dpp)# set conform-cos-transmit <0-6>


S Commandsset conform-cos-transmit

set conform-dscp-transmitset conform-dscp-transmit <0-63>

Description: Conform Policer Mark DSCP

Syntax:

Conform Policer Mark DSCP<0-63>


Command Path:

# configure [['terminal', 't']](config)# policy-map type data-plane <WORD>(config-pmap-dpp)# set conform-dscp-transmit <0-63>

set conform-dscp-transmit <0-63>

Description: Conform Policer Mark DSCP

Syntax:

Conform Policer Mark DSCP<0-63>


Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# policy-map type data-plane <WORD>(config-tenant-pmap-dpp)# set conform-dscp-transmit <0-63>


S Commandsset conform-dscp-transmit

set conformset conform <WORD>

Description: Conform Policer Action

Syntax:

Conform Policer ActionWORD


Command Path:

# configure [['terminal', 't']](config)# policy-map type data-plane <WORD>(config-pmap-dpp)# set conform <WORD>

set conform <WORD>

Description: Conform Policer Action

Syntax:

Conform Policer ActionWORD


Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# policy-map type data-plane <WORD>(config-tenant-pmap-dpp)# set conform <WORD>


S Commandsset conform

set dampeningset dampening <NUMBER> <NUMBER> <NUMBER> <NUMBER>

Description: Route Flap dampening

Syntax:

Decay half life. Number range from=1 to=60<1-60>

Value to start reusing a route. Number range from=1 to=20000<1-20000>

Value to start suppressing a route. Number range from=1 to=20000<1-20000>

Maximum suppress time for stable route. Number range from=1 to=255<1-255>


Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# template route-profile <WORD> tenant <WORD>(config-leaf-template-route-profile)# set dampening <NUMBER> <NUMBER> <NUMBER> <NUMBER>

set dampening <NUMBER> <NUMBER> <NUMBER> <NUMBER>


Syntax:






Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# template route-profile <WORD> <WORD> <NUMBER>(config-leaf-vrf-template-route-profile)# set dampening <NUMBER> <NUMBER> <NUMBER> <NUMBER>


S Commandsset dampening



Syntax:






Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match bridge-domain <> [tenant <tenant>](config-leaf-vrf-route-map-match)# set dampening <NUMBER> <NUMBER> <NUMBER> <NUMBER>



Syntax:






Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match prefix-list <WORD>(config-leaf-vrf-route-map-match)# set dampening <NUMBER> <NUMBER> <NUMBER> <NUMBER>





Syntax:






Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match route group <> [order <order>](config-leaf-vrf-route-map-match)# set dampening <NUMBER> <NUMBER> <NUMBER> <NUMBER>



Syntax:






Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# template route-profile <WORD> tenant <WORD>(config-leaf-template-route-profile)# set dampening <NUMBER> <NUMBER> <NUMBER> <NUMBER>



Syntax:








Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# template route-profile <WORD> <WORD> <NUMBER>(config-leaf-vrf-template-route-profile)# set dampening <NUMBER> <NUMBER> <NUMBER> <NUMBER>



Syntax:






Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match bridge-domain <> [tenant <tenant>](config-leaf-vrf-route-map-match)# set dampening <NUMBER> <NUMBER> <NUMBER> <NUMBER>



Syntax:








Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match prefix-list <WORD>(config-leaf-vrf-route-map-match)# set dampening <NUMBER> <NUMBER> <NUMBER> <NUMBER>



Syntax:






Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match route group <> [order <order>](config-leaf-vrf-route-map-match)# set dampening <NUMBER> <NUMBER> <NUMBER> <NUMBER>



set dscp-codeset dscp-code <dscp-prop> <dscp-val>

Description: Set DSCP Class translation values

Syntax:

DSCP Class Namedscp-prop

Dscp valdscp-val

Command Mode: qos : Set DSCP Class translation values

Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# qos dscp-map <WORD>(config-qos-cmap)# set dscp-code <dscp-prop> <dscp-val>


S Commandsset dscp-code

set dscpset dscp <WORD>

Description: Specify the DSCP level for the EPG

Syntax:

DSCP valueWORD

Command Mode: external-l3 epg : External L3 EPG configuration mode

Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# external-l3 epg <WORD> [oob-mgmt] [l3out <l3out>](config-tenant-l3ext-epg)# set dscp <WORD>


S Commandsset dscp

set exceed-cos-transmitset exceed-cos-transmit <0-6>

Description: Exceed Policer Mark Cos

Syntax:

Exceed Policer Mark Cos<0-6>


Command Path:

# configure [['terminal', 't']](config)# policy-map type data-plane <WORD>(config-pmap-dpp)# set exceed-cos-transmit <0-6>

set exceed-cos-transmit <0-6>

Description: Exceed Policer Mark Cos

Syntax:

Exceed Policer Mark Cos<0-6>


Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# policy-map type data-plane <WORD>(config-tenant-pmap-dpp)# set exceed-cos-transmit <0-6>


S Commandsset exceed-cos-transmit

set exceed-dscp-transmitset exceed-dscp-transmit <0-63>

Description: Exceed Policer Mark DSCP

Syntax:

Exceed Policer Mark DSCP<0-63>


Command Path:

# configure [['terminal', 't']](config)# policy-map type data-plane <WORD>(config-pmap-dpp)# set exceed-dscp-transmit <0-63>

set exceed-dscp-transmit <0-63>

Description: Exceed Policer Mark DSCP

Syntax:

Exceed Policer Mark DSCP<0-63>


Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# policy-map type data-plane <WORD>(config-tenant-pmap-dpp)# set exceed-dscp-transmit <0-63>


S Commandsset exceed-dscp-transmit

set exceedset exceed <WORD>

Description: Exceed Policer Action

Syntax:

Exceed Policer ActionWORD


Command Path:

# configure [['terminal', 't']](config)# policy-map type data-plane <WORD>(config-pmap-dpp)# set exceed <WORD>

set exceed <WORD>

Description: Exceed Policer Action

Syntax:

Exceed Policer ActionWORD


Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# policy-map type data-plane <WORD>(config-tenant-pmap-dpp)# set exceed <WORD>


S Commandsset exceed

set excessive-burstset excessive-burst <0-549755813760> UNIT

Description: Excessive Burst Rate

Syntax:

Excessive Burst Rate<0-549755813760>

Excessive Burst Rate UnitUNIT


Command Path:

# configure [['terminal', 't']](config)# policy-map type data-plane <WORD>(config-pmap-dpp)# set excessive-burst <0-549755813760> UNIT

set excessive-burst <0-549755813760> UNIT

Description: Excessive Burst Rate

Syntax:

Excessive Burst Rate<0-549755813760>

Excessive Burst Rate UnitUNIT


Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# policy-map type data-plane <WORD>(config-tenant-pmap-dpp)# set excessive-burst <0-549755813760> UNIT


S Commandsset excessive-burst

set local-preferenceset local-preference <0-4294967295>

Description: BGP local preference path attribute

Syntax:

Preference value<0-4294967295>


Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# vrf context <WORD>(config-tenant-vrf)# route-profile <WORD>(config-tenant-vrf-route-profile)# set local-preference <0-4294967295>

set local-preference <0-4294967295>


Syntax:



Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# template route-profile <WORD> tenant <WORD>(config-leaf-template-route-profile)# set local-preference <0-4294967295>



Syntax:




S Commandsset local-preference

Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# template route-profile <WORD> <WORD> <NUMBER>(config-leaf-vrf-template-route-profile)# set local-preference <0-4294967295>



Syntax:



Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match bridge-domain <> [tenant <tenant>](config-leaf-vrf-route-map-match)# set local-preference <0-4294967295>



Syntax:



Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match prefix-list <WORD>(config-leaf-vrf-route-map-match)# set local-preference <0-4294967295>



Syntax:





Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match route group <> [order <order>](config-leaf-vrf-route-map-match)# set local-preference <0-4294967295>



Syntax:



Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# template route-profile <WORD> tenant <WORD>(config-leaf-template-route-profile)# set local-preference <0-4294967295>



Syntax:



Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# template route-profile <WORD> <WORD> <NUMBER>(config-leaf-vrf-template-route-profile)# set local-preference <0-4294967295>



Syntax:





Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match bridge-domain <> [tenant <tenant>](config-leaf-vrf-route-map-match)# set local-preference <0-4294967295>



Syntax:



Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match prefix-list <WORD>(config-leaf-vrf-route-map-match)# set local-preference <0-4294967295>



Syntax:



Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match route group <> [order <order>](config-leaf-vrf-route-map-match)# set local-preference <0-4294967295>



set metric-typeset metric-type <metric-type>

Description: Type of metric for destination routing protocol

Syntax:

<metric-type><metric-type>


Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# vrf context <WORD>(config-tenant-vrf)# route-profile <WORD>(config-tenant-vrf-route-profile)# set metric-type <metric-type>

set metric-type <metric-type>


Syntax:



Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# template route-profile <WORD> tenant <WORD>(config-leaf-template-route-profile)# set metric-type <metric-type>



Syntax:




S Commandsset metric-type

Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# template route-profile <WORD> <WORD> <NUMBER>(config-leaf-vrf-template-route-profile)# set metric-type <metric-type>



Syntax:



Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match bridge-domain <> [tenant <tenant>](config-leaf-vrf-route-map-match)# set metric-type <metric-type>



Syntax:



Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match prefix-list <WORD>(config-leaf-vrf-route-map-match)# set metric-type <metric-type>



Syntax:





Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match route group <> [order <order>](config-leaf-vrf-route-map-match)# set metric-type <metric-type>



Syntax:



Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# template route-profile <WORD> tenant <WORD>(config-leaf-template-route-profile)# set metric-type <metric-type>



Syntax:



Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# template route-profile <WORD> <WORD> <NUMBER>(config-leaf-vrf-template-route-profile)# set metric-type <metric-type>



Syntax:





Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match bridge-domain <> [tenant <tenant>](config-leaf-vrf-route-map-match)# set metric-type <metric-type>



Syntax:



Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match prefix-list <WORD>(config-leaf-vrf-route-map-match)# set metric-type <metric-type>



Syntax:



Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match route group <> [order <order>](config-leaf-vrf-route-map-match)# set metric-type <metric-type>



set metricset metric <NUMBER>

Description: Set metric for destination routing protocol

Syntax:

Metric value. Number range from=0 to=255<0-255>


Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# vrf context <WORD>(config-tenant-vrf)# route-profile <WORD>(config-tenant-vrf-route-profile)# set metric <NUMBER>

set metric <NUMBER>


Syntax:



Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# template route-profile <WORD> tenant <WORD>(config-leaf-template-route-profile)# set metric <NUMBER>

set metric <NUMBER>


Syntax:




S Commandsset metric

Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# template route-profile <WORD> <WORD> <NUMBER>(config-leaf-vrf-template-route-profile)# set metric <NUMBER>

set metric <NUMBER>


Syntax:



Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match bridge-domain <> [tenant <tenant>](config-leaf-vrf-route-map-match)# set metric <NUMBER>

set metric <NUMBER>


Syntax:



Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match prefix-list <WORD>(config-leaf-vrf-route-map-match)# set metric <NUMBER>

set metric <NUMBER>


Syntax:





Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match route group <> [order <order>](config-leaf-vrf-route-map-match)# set metric <NUMBER>

set metric <NUMBER>


Syntax:



Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# template route-profile <WORD> tenant <WORD>(config-leaf-template-route-profile)# set metric <NUMBER>

set metric <NUMBER>


Syntax:



Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# template route-profile <WORD> <WORD> <NUMBER>(config-leaf-vrf-template-route-profile)# set metric <NUMBER>

set metric <NUMBER>


Syntax:





Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match bridge-domain <> [tenant <tenant>](config-leaf-vrf-route-map-match)# set metric <NUMBER>

set metric <NUMBER>


Syntax:



Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match prefix-list <WORD>(config-leaf-vrf-route-map-match)# set metric <NUMBER>

set metric <NUMBER>


Syntax:



Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match route group <> [order <order>](config-leaf-vrf-route-map-match)# set metric <NUMBER>



set modeset mode <WORD>

Description: Policer Mode

Syntax:

Policer ModeWORD


Command Path:

# configure [['terminal', 't']](config)# policy-map type data-plane <WORD>(config-pmap-dpp)# set mode <WORD>

set mode <WORD>

Description: Policer Mode

Syntax:

Policer ModeWORD


Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# policy-map type data-plane <WORD>(config-tenant-pmap-dpp)# set mode <WORD>


S Commandsset mode

set next-hopset next-hop <IPv4 or IPv6 address>

Description: Set next hop for destination routing protocol

Syntax:

Next hop addressIPv4 or IPv6 address


Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# vrf context <WORD>(config-tenant-vrf)# route-profile <WORD>(config-tenant-vrf-route-profile)# set next-hop <IPv4 or IPv6 address>

set next-hop <IPv4 or IPv6 address>

Description: Set next hop address

Syntax:



Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# template route-profile <WORD> tenant <WORD>(config-leaf-template-route-profile)# set next-hop <IPv4 or IPv6 address>



Syntax:




S Commandsset next-hop

Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# template route-profile <WORD> <WORD> <NUMBER>(config-leaf-vrf-template-route-profile)# set next-hop <IPv4 or IPv6 address>



Syntax:



Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match bridge-domain <> [tenant <tenant>](config-leaf-vrf-route-map-match)# set next-hop <IPv4 or IPv6 address>



Syntax:



Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match prefix-list <WORD>(config-leaf-vrf-route-map-match)# set next-hop <IPv4 or IPv6 address>



Syntax:





Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match route group <> [order <order>](config-leaf-vrf-route-map-match)# set next-hop <IPv4 or IPv6 address>



Syntax:



Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# template route-profile <WORD> tenant <WORD>(config-leaf-template-route-profile)# set next-hop <IPv4 or IPv6 address>



Syntax:



Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# template route-profile <WORD> <WORD> <NUMBER>(config-leaf-vrf-template-route-profile)# set next-hop <IPv4 or IPv6 address>



Syntax:





Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match bridge-domain <> [tenant <tenant>](config-leaf-vrf-route-map-match)# set next-hop <IPv4 or IPv6 address>



Syntax:



Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match prefix-list <WORD>(config-leaf-vrf-route-map-match)# set next-hop <IPv4 or IPv6 address>



Syntax:



Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match route group <> [order <order>](config-leaf-vrf-route-map-match)# set next-hop <IPv4 or IPv6 address>



set pirset pir <0-4398046510080> UNIT

Description: Peak Rate

Syntax:

Peak Rate<0-4398046510080>

Pir UnitUNIT


Command Path:

# configure [['terminal', 't']](config)# policy-map type data-plane <WORD>(config-pmap-dpp)# set pir <0-4398046510080> UNIT

set pir <0-4398046510080> UNIT

Description: Peak Rate

Syntax:

Peak Rate<0-4398046510080>

Pir UnitUNIT


Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# policy-map type data-plane <WORD>(config-tenant-pmap-dpp)# set pir <0-4398046510080> UNIT


S Commandsset pir

set qos-classset qos-class <WORD>

Description: Class of QOS to specify

Syntax:

Qos LevelWORD


Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# contract <WORD> [type <type>](config-tenant-contract)# set qos-class <WORD>

set qos-class <WORD> WORD

Description: Class of QOS to specify

Syntax:

Qos LevelWORD

Target QOS DirectionWORD

Command Mode: subject : Configuration a subject on the contract

Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# contract <WORD> [type <type>](config-tenant-contract)# subject <WORD>(config-tenant-contract-subj)# set qos-class <WORD> WORD

set qos-class unspecified|level1|level2|level3

Description: Specify the QOS level for the EPG

Syntax:

Unspecified QoS levelunspecified

QoS level1level1

QoS level2level2


S Commandsset qos-class

QoS level3level3

Command Mode: external-l3 epg : External L3 EPG configuration mode

Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# external-l3 epg <WORD> [oob-mgmt] [l3out <l3out>](config-tenant-l3ext-epg)# set qos-class unspecified|level1|level2|level3


S Commandsset qos-class

set tagset tag <NUMBER>

Description: Tag value for destination routing protocol

Syntax:

Tag value. Number range from=0 to=4294967295<0-4294967295>


Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# vrf context <WORD>(config-tenant-vrf)# route-profile <WORD>(config-tenant-vrf-route-profile)# set tag <NUMBER>

set tag <NUMBER>


Syntax:



Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# template route-profile <WORD> tenant <WORD>(config-leaf-template-route-profile)# set tag <NUMBER>

set tag <NUMBER>


Syntax:




S Commandsset tag

Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# template route-profile <WORD> <WORD> <NUMBER>(config-leaf-vrf-template-route-profile)# set tag <NUMBER>

set tag <NUMBER>


Syntax:



Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match bridge-domain <> [tenant <tenant>](config-leaf-vrf-route-map-match)# set tag <NUMBER>

set tag <NUMBER>


Syntax:



Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match prefix-list <WORD>(config-leaf-vrf-route-map-match)# set tag <NUMBER>

set tag <NUMBER>


Syntax:



S Commandsset tag


Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match route group <> [order <order>](config-leaf-vrf-route-map-match)# set tag <NUMBER>

set tag <NUMBER>


Syntax:



Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# template route-profile <WORD> tenant <WORD>(config-leaf-template-route-profile)# set tag <NUMBER>

set tag <NUMBER>


Syntax:



Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# template route-profile <WORD> <WORD> <NUMBER>(config-leaf-vrf-template-route-profile)# set tag <NUMBER>

set tag <NUMBER>


Syntax:



S Commandsset tag


Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match bridge-domain <> [tenant <tenant>](config-leaf-vrf-route-map-match)# set tag <NUMBER>

set tag <NUMBER>


Syntax:



Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match prefix-list <WORD>(config-leaf-vrf-route-map-match)# set tag <NUMBER>

set tag <NUMBER>


Syntax:



Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match route group <> [order <order>](config-leaf-vrf-route-map-match)# set tag <NUMBER>


S Commandsset tag

set target-dscpset target-dscp <WORD>

Description: class of target dscp to specify

Syntax:

Target dscpWORD


Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# contract <WORD> [type <type>](config-tenant-contract)# set target-dscp <WORD>

set target-dscp <WORD> WORD

Description: class of target dscp to specify

Syntax:

Target dscpWORD

Target DSCP DirectionWORD

Command Mode: subject : Configuration a subject on the contract

Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# contract <WORD> [type <type>](config-tenant-contract)# subject <WORD>(config-tenant-contract-subj)# set target-dscp <WORD> WORD


S Commandsset target-dscp

set typeset type <WORD>

Description: Policer type

Syntax:

Policer TypeWORD


Command Path:

# configure [['terminal', 't']](config)# policy-map type data-plane <WORD>(config-pmap-dpp)# set type <WORD>

set type <WORD>

Description: Policer type

Syntax:

Policer TypeWORD


Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# policy-map type data-plane <WORD>(config-tenant-pmap-dpp)# set type <WORD>


S Commandsset type

set violate-cos-transmitset violate-cos-transmit <0-6>

Description: Violate Policer Mark Cos

Syntax:

Violate Policer Mark Cos<0-6>


Command Path:

# configure [['terminal', 't']](config)# policy-map type data-plane <WORD>(config-pmap-dpp)# set violate-cos-transmit <0-6>

set violate-cos-transmit <0-6>

Description: Violate Policer Mark Cos

Syntax:

Violate Policer Mark Cos<0-6>


Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# policy-map type data-plane <WORD>(config-tenant-pmap-dpp)# set violate-cos-transmit <0-6>


S Commandsset violate-cos-transmit

set violate-dscp-transmitset violate-dscp-transmit <0-63>

Description: Violate Policer Mark DSCP

Syntax:

Violate Policer Mark DSCP<0-63>


Command Path:

# configure [['terminal', 't']](config)# policy-map type data-plane <WORD>(config-pmap-dpp)# set violate-dscp-transmit <0-63>

set violate-dscp-transmit <0-63>

Description: Violate Policer Mark DSCP

Syntax:

Violate Policer Mark DSCP<0-63>


Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# policy-map type data-plane <WORD>(config-tenant-pmap-dpp)# set violate-dscp-transmit <0-63>


S Commandsset violate-dscp-transmit

set violateset violate <WORD>

Description: Violate Policer Action

Syntax:

Violate Policer ActionWORD


Command Path:

# configure [['terminal', 't']](config)# policy-map type data-plane <WORD>(config-pmap-dpp)# set violate <WORD>

set violate <WORD>

Description: Violate Policer Action

Syntax:

Violate Policer ActionWORD


Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# policy-map type data-plane <WORD>(config-tenant-pmap-dpp)# set violate <WORD>


S Commandsset violate

set weightset weight <NUMBER>

Description:Weight value for destination routing protocol

Syntax:

Weight value. Number range from=0 to=65535<0-65535>


Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# vrf context <WORD>(config-tenant-vrf)# route-profile <WORD>(config-tenant-vrf-route-profile)# set weight <NUMBER>

set weight <NUMBER>


Syntax:



Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# template route-profile <WORD> tenant <WORD>(config-leaf-template-route-profile)# set weight <NUMBER>

set weight <NUMBER>


Syntax:




S Commandsset weight

Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# template route-profile <WORD> <WORD> <NUMBER>(config-leaf-vrf-template-route-profile)# set weight <NUMBER>

set weight <NUMBER>


Syntax:



Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match bridge-domain <> [tenant <tenant>](config-leaf-vrf-route-map-match)# set weight <NUMBER>

set weight <NUMBER>


Syntax:



Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match prefix-list <WORD>(config-leaf-vrf-route-map-match)# set weight <NUMBER>

set weight <NUMBER>


Syntax:





Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match route group <> [order <order>](config-leaf-vrf-route-map-match)# set weight <NUMBER>

set weight <NUMBER>


Syntax:



Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# template route-profile <WORD> tenant <WORD>(config-leaf-template-route-profile)# set weight <NUMBER>

set weight <NUMBER>


Syntax:



Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# template route-profile <WORD> <WORD> <NUMBER>(config-leaf-vrf-template-route-profile)# set weight <NUMBER>

set weight <NUMBER>


Syntax:





Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match bridge-domain <> [tenant <tenant>](config-leaf-vrf-route-map-match)# set weight <NUMBER>

set weight <NUMBER>


Syntax:



Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match prefix-list <WORD>(config-leaf-vrf-route-map-match)# set weight <NUMBER>

set weight <NUMBER>


Syntax:



Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match route group <> [order <order>](config-leaf-vrf-route-map-match)# set weight <NUMBER>



shellinaboxshellinabox

Description: Configures the communication policy of the SHELLINABOX feature

Command Mode: comm-policy : Configure any communication policy, ssh/telnet/shellinabox/http/https

Usage:

In the APIC GUI, the SHELLINABOX feature allows you to open a pop-up SSH session to a fabric switchby right-clicking the icon of the switch. To enable or disable this feature, use the shellinabox command toenter the SHELLINABOX communication policy group, then use the [no] admin-state-enable command.

Command Path:

# configure [['terminal', 't']](config)# comm-policy <WORD>(config-comm-policy)# shellinabox


S Commandsshellinabox

show aaa authenticationshow aaa authentication

Description: Show AAA Authentication information

Command Mode: exec : Exec Mode

Command Path:

# show aaa authentication


S Commandsshow aaa authentication

show aaa groupsshow aaa groups

Description: Show AAA group information


Command Path:

# show aaa groups


S Commandsshow aaa groups

show access-listshow access-list WORD

Description: Show Access-list Information

Syntax:

Name of the Contract to filter on (Max Size 64)WORD


Command Path:

# show access-list WORD


S Commandsshow access-list

show accounting logshow accounting log

Description: CLI configuration command logs


Command Path:

# show accounting log

NOTE:

This command displays only those changes made using the command line interface (CLI). It does not displaychanges made using the GUI or the API. To view all changes made in the Management Information Tree, usethe show audit detail command.


S Commandsshow accounting log

show acllog deny l2 flowshow acllog deny l2 flow

Description: l3 flow information


Command Path:

# show acllog deny l2 flow


S Commandsshow acllog deny l2 flow

show acllog deny l2 flow tenant vrfshow acllog deny l2 flow tenant <WORD> vrf [vlan <NUMBER>] [srcIntf <srcintf>] <WORD>

Description: tenant vrf information

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

(Optional) Encapsulation Vlan. Number range from=1 to=4094<1-4094>

(Optional) source Interfacesrcintf

Name of the VRF to filter on (Max Size 64)WORD


Command Path:

# show acllog deny l2 flow tenant <WORD> vrf [vlan <NUMBER>] [srcIntf <srcintf>] <WORD>


S Commandsshow acllog deny l2 flow tenant vrf

show acllog deny l2 flow tenant vrf detailshow acllog deny l2 flow tenant <WORD> vrf [vlan <NUMBER>] [srcIntf <srcintf>] <WORD> detail [srcmac<E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [dstmac <E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >]

Description: detail information

Syntax:





(Optional) MAC address (Option 1) MAC address (Option 2) MACaddress (Option 3) MAC address (Option 4)

E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE




Command Path:

# show acllog deny l2 flow tenant <WORD> vrf [vlan <NUMBER>] [srcIntf <srcintf>] <WORD>detail [srcmac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [dstmac <E.E.EEE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >]


S Commandsshow acllog deny l2 flow tenant vrf detail

show acllog deny l2 pktshow acllog deny l2 pkt

Description: Pkt command


Command Path:

# show acllog deny l2 pkt


S Commandsshow acllog deny l2 pkt

show acllog deny l2 pkt tenant vrfshow acllog deny l2 pkt tenant <WORD> vrf <WORD> [start-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>][end-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>] [vlan <NUMBER>] [srcintf <srcintf>] [pktlen <NUMBER>]

Description: Vrf Name

Syntax:


Name of the vrf to filter on (Max Size 64)WORD

(Optional) Event activity in time intervaltime-stamp<YYYY-MM-DDTHR:MIN:SEC>



(Optional) Source Interfacesrcintf

(Optional) packet length. Number range from=1 to=65535<1-65535>


Command Path:

# show acllog deny l2 pkt tenant <WORD> vrf <WORD> [start-time time-stamp<YYYY-MM-DDTHR:MIN:SEC>] [end-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>] [vlan <NUMBER>][srcintf <srcintf>] [pktlen <NUMBER>]


S Commandsshow acllog deny l2 pkt tenant vrf

show acllog deny l2 pkt tenant vrf detailshow acllog deny l2 pkt tenant <WORD> vrf <WORD> [start-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>][end-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>] [vlan <NUMBER>] [srcintf <srcintf>] [pktlen <NUMBER>]detail [srcmac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [dstmac <E.E.EEE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >]

Description: Detail information

Syntax:






(Optional) Source Interfacesrcintf







Command Path:

# show acllog deny l2 pkt tenant <WORD> vrf <WORD> [start-time time-stamp<YYYY-MM-DDTHR:MIN:SEC>] [end-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>] [vlan <NUMBER>][srcintf <srcintf>] [pktlen <NUMBER>] detail [srcmac <E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [dstmac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE >]


S Commandsshow acllog deny l2 pkt tenant vrf detail

show acllog deny l3 flowshow acllog deny l3 flow

Description: l3 flow information


Command Path:

# show acllog deny l3 flow


S Commandsshow acllog deny l3 flow

show acllog deny l3 flow tenant vrfshow acllog deny l3 flow tenant <WORD> vrf [srcip <A.B.C.D or A:B::C:D>] [dstip <A.B.C.D or A:B::C:D>][protocol <Protocol>] [srcport <SrcPort>] [dstport <DstPort>] [srcintf <srcintf>] <WORD>


Syntax:


(Optional) IP address in format i.i.i.i or IPv6 address in formatxxxx:xxxx, xxxx::xx

A.B.C.D or A:B::C:D


A.B.C.D or A:B::C:D

(Optional) ProtocolProtocol

(Optional) source portSrcPort

(Optional) destination portDstPort

(Optional) source interfacesrcintf



Command Path:

# show acllog deny l3 flow tenant <WORD> vrf [srcip <A.B.C.D or A:B::C:D>] [dstip <A.B.C.Dor A:B::C:D>] [protocol <Protocol>] [srcport <SrcPort>] [dstport <DstPort>] [srcintf<srcintf>] <WORD>


S Commandsshow acllog deny l3 flow tenant vrf

show acllog deny l3 flow tenant vrf detailshow acllog deny l3 flow tenant <WORD> vrf [srcip <A.B.C.D or A:B::C:D>] [dstip <A.B.C.D or A:B::C:D>][protocol <Protocol>] [srcport <SrcPort>] [dstport <DstPort>] [srcintf <srcintf>] <WORD> detail [srcmac <E.E.EEE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [dstmac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE >]


Syntax:



A.B.C.D or A:B::C:D


A.B.C.D or A:B::C:D











Command Path:

# show acllog deny l3 flow tenant <WORD> vrf [srcip <A.B.C.D or A:B::C:D>] [dstip <A.B.C.Dor A:B::C:D>] [protocol <Protocol>] [srcport <SrcPort>] [dstport <DstPort>] [srcintf<srcintf>] <WORD> detail [srcmac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE>] [dstmac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >]


S Commandsshow acllog deny l3 flow tenant vrf detail

show acllog deny l3 pktshow acllog deny l3 pkt

Description: Pkt command


Command Path:

# show acllog deny l3 pkt


S Commandsshow acllog deny l3 pkt

show acllog deny l3 pkt tenant vrfshow acllog deny l3 pkt tenant <WORD> vrf <WORD> [start-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>][end-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>] [protocol <protocol>] [srcip <A.B.C.D or A:B::C:D>][dstip <A.B.C.D or A:B::C:D>] [srcport <NUMBER>] [dstport <NUMBER>] [srcintf <srcintf>] [pktlen <NUMBER>]


Syntax:





(Optional) protocolprotocol


A.B.C.D or A:B::C:D


A.B.C.D or A:B::C:D

(Optional) Source port. Number range from=0 to=65535<0-65535>

(Optional) Destination port. Number range from=0 to=65535<0-65535>




Command Path:

# show acllog deny l3 pkt tenant <WORD> vrf <WORD> [start-time time-stamp<YYYY-MM-DDTHR:MIN:SEC>] [end-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>] [protocol <protocol>][srcip <A.B.C.D or A:B::C:D>] [dstip <A.B.C.D or A:B::C:D>] [srcport <NUMBER>] [dstport<NUMBER>] [srcintf <srcintf>] [pktlen <NUMBER>]


S Commandsshow acllog deny l3 pkt tenant vrf

show acllog deny l3 pkt tenant vrf detailshow acllog deny l3 pkt tenant <WORD> vrf <WORD> [start-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>][end-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>] [protocol <protocol>] [srcip <A.B.C.D or A:B::C:D>][dstip <A.B.C.D or A:B::C:D>] [srcport <NUMBER>] [dstport <NUMBER>] [srcintf <srcintf>] [pktlen <NUMBER>]detail [srcmac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [dstmac <E.E.EEE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >]


Syntax:







A.B.C.D or A:B::C:D


A.B.C.D or A:B::C:D












Command Path:

# show acllog deny l3 pkt tenant <WORD> vrf <WORD> [start-time time-stamp<YYYY-MM-DDTHR:MIN:SEC>] [end-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>] [protocol <protocol>][srcip <A.B.C.D or A:B::C:D>] [dstip <A.B.C.D or A:B::C:D>] [srcport <NUMBER>] [dstport<NUMBER>] [srcintf <srcintf>] [pktlen <NUMBER>] detail [srcmac <E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [dstmac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE >]



show acllog permit l2 flow tenant vrfshow acllog permit l2 flow tenant <WORD> vrf [vlan <NUMBER>] [srcintf <srcintf>] <WORD>


Syntax:






Command Path:

# show acllog permit l2 flow tenant <WORD> vrf [vlan <NUMBER>] [srcintf <srcintf>] <WORD>


S Commandsshow acllog permit l2 flow tenant vrf

show acllog permit l2 flow tenant vrf detailshow acllog permit l2 flow tenant <WORD> vrf [vlan <NUMBER>] [srcintf <srcintf>] <WORD> detail [srcmac<E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [dstmac <E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >]


Syntax:










Command Path:

# show acllog permit l2 flow tenant <WORD> vrf [vlan <NUMBER>] [srcintf <srcintf>] <WORD>detail [srcmac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [dstmac <E.E.EEE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >]


S Commandsshow acllog permit l2 flow tenant vrf detail

show acllog permit l2 pkt tenant vrfshow acllog permit l2 pkt tenant <WORD> vrf <WORD> [start-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>][end-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>] [vlan <NUMBER>] [srcintf <srcintf>] [pktlen <NUMBER>]


Syntax:









Command Path:

# show acllog permit l2 pkt tenant <WORD> vrf <WORD> [start-time time-stamp<YYYY-MM-DDTHR:MIN:SEC>] [end-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>] [vlan <NUMBER>][srcintf <srcintf>] [pktlen <NUMBER>]


S Commandsshow acllog permit l2 pkt tenant vrf

show acllog permit l2 pkt tenant vrf detailshow acllog permit l2 pkt tenant <WORD> vrf <WORD> [start-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>][end-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>] [vlan <NUMBER>] [srcintf <srcintf>] [pktlen <NUMBER>]detail [srcmac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [dstmac <E.E.EEE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >]


Syntax:













Command Path:

# show acllog permit l2 pkt tenant <WORD> vrf <WORD> [start-time time-stamp<YYYY-MM-DDTHR:MIN:SEC>] [end-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>] [vlan <NUMBER>][srcintf <srcintf>] [pktlen <NUMBER>] detail [srcmac <E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [dstmac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE >]


S Commandsshow acllog permit l2 pkt tenant vrf detail

show acllog permit l3 flow tenant vrfshow acllog permit l3 flow tenant <WORD> vrf [srcip <A.B.C.D or A:B::C:D>] [dstip <A.B.C.D or A:B::C:D>][protocol <Protocol>] [srcport <SrcPort>] [dstport <DstPort>] [srcintf <srcintf>] <WORD>


Syntax:



A.B.C.D or A:B::C:D


A.B.C.D or A:B::C:D







Command Path:

# show acllog permit l3 flow tenant <WORD> vrf [srcip <A.B.C.D or A:B::C:D>] [dstip <A.B.C.Dor A:B::C:D>] [protocol <Protocol>] [srcport <SrcPort>] [dstport <DstPort>] [srcintf<srcintf>] <WORD>


S Commandsshow acllog permit l3 flow tenant vrf

show acllog permit l3 flow tenant vrf detailshow acllog permit l3 flow tenant <WORD> vrf [srcip <A.B.C.D or A:B::C:D>] [dstip <A.B.C.D or A:B::C:D>][protocol <Protocol>] [srcport <SrcPort>] [dstport <DstPort>] [srcintf <srcintf>] <WORD> detail [srcmac <E.E.EEE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [dstmac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE >]


Syntax:



A.B.C.D or A:B::C:D


A.B.C.D or A:B::C:D











Command Path:

# show acllog permit l3 flow tenant <WORD> vrf [srcip <A.B.C.D or A:B::C:D>] [dstip <A.B.C.Dor A:B::C:D>] [protocol <Protocol>] [srcport <SrcPort>] [dstport <DstPort>] [srcintf<srcintf>] <WORD> detail [srcmac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE>] [dstmac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >]


S Commandsshow acllog permit l3 flow tenant vrf detail

show acllog permit l3 pkt tenant vrfshow acllog permit l3 pkt tenant <WORD> vrf <WORD> [start-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>][end-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>] [protocol <protocol>] [srcip <A.B.C.D or A:B::C:D>][dstip <A.B.C.D or A:B::C:D>] [srcport <NUMBER>] [dstport <NUMBER>] [srcintf <srcintf>] [pktlen <NUMBER>]


Syntax:







A.B.C.D or A:B::C:D


A.B.C.D or A:B::C:D






Command Path:

# show acllog permit l3 pkt tenant <WORD> vrf <WORD> [start-time time-stamp<YYYY-MM-DDTHR:MIN:SEC>] [end-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>] [protocol <protocol>][srcip <A.B.C.D or A:B::C:D>] [dstip <A.B.C.D or A:B::C:D>] [srcport <NUMBER>] [dstport<NUMBER>] [srcintf <srcintf>] [pktlen <NUMBER>]


S Commandsshow acllog permit l3 pkt tenant vrf

show acllog permit l3 pkt tenant vrf detailshow acllog permit l3 pkt tenant <WORD> vrf <WORD> [start-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>][end-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>] [protocol <protocol>] [srcip <A.B.C.D or A:B::C:D>][dstip <A.B.C.D or A:B::C:D>] [srcport <NUMBER>] [dstport <NUMBER>] [srcintf <srcintf>] [pktlen <NUMBER>]detail [srcmac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [dstmac <E.E.EEE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >]


Syntax:







A.B.C.D or A:B::C:D


A.B.C.D or A:B::C:D












Command Path:

# show acllog permit l3 pkt tenant <WORD> vrf <WORD> [start-time time-stamp<YYYY-MM-DDTHR:MIN:SEC>] [end-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>] [protocol <protocol>][srcip <A.B.C.D or A:B::C:D>] [dstip <A.B.C.D or A:B::C:D>] [srcport <NUMBER>] [dstport<NUMBER>] [srcintf <srcintf>] [pktlen <NUMBER>] detail [srcmac <E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [dstmac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE >]



show analyticsshow analytics

Description: Show analytics cluster configuration


Command Path:

# show analytics


S Commandsshow analytics

show applicationshow application WORD

Description: Show Application Profiles Information

Syntax:

Name of the application we eventually want to filter on (Max Size 64)WORD


Command Path:

# show application WORD


S Commandsshow application

show auditsshow audits [id <log-id>] [action action<action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] <scope>

Description: Show audit-log information

Syntax:

(Optional) Log ID<log-id>

(Optional) Object action indicatoraction<action-type>

(Optional) Name of user<user-name>

(Optional) Logs created in time interval. Number range from=1 to=59<num-minutes>

(Optional) Logs created in time interval. Number range from=1 to=23<num-hours>

(Optional) Logs created in time interval. Number range from=1 to=999<num-days>

(Optional) Logs created in time interval<YYYY-MM-DDTHR:MIN:SEC>

(Optional) Logs created in time intervalend-time<YYYY-MM-DDTHR:MIN:SEC>

(Optional) Detailed audit-log information. Displays what was modifiedand displays the old and new settings.

detail

command scope<scope>


Command Path:

# show audits [id <log-id>] [action action<action-type>] [user <user-name>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] <scope>


S Commandsshow audits

show audits tenantshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD

Description: Show Tenants Information

Syntax:



Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD


S Commandsshow audits tenant

show audits tenant applicationshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD application WORD


Syntax:




Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD application WORD


S Commandsshow audits tenant application

show audits tenant application epgshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD application WORD epg WORD

Description: Show Application EPG Information

Syntax:



Name of the AEPG to filter on (Max Size 64)WORD


Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD application WORD epg WORD


S Commandsshow audits tenant application epg

show audits tenant bridge-domainshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD bridge-domain WORD

Description: Show Bridge-domain Information

Syntax:


Name of the bridge-domain (Max Size 64)WORD


Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD bridge-domain WORD


S Commandsshow audits tenant bridge-domain

show audits tenant bridge-domain detailshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD bridge-domain WORD detail

Description: Show Bridge-domain Detailed Information

Syntax:




Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD bridge-domain WORD detail


S Commandsshow audits tenant bridge-domain detail

show audits tenant interface bridge-domainshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD interface bridge-domain WORD


Syntax:




Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD interface bridge-domain WORD


S Commandsshow audits tenant interface bridge-domain

show audits tenant interface bridge-domain detailshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD interface bridge-domain WORD detail


Syntax:




Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD interface bridge-domain WORD detail


S Commandsshow audits tenant interface bridge-domain detail

show audits tenant multicast-route-mapsshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD multicast-route-maps

Description: Show multicast route-maps per Tenant

Syntax:



Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD multicast-route-maps


S Commandsshow audits tenant multicast-route-maps

show audits tenant vrfshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD

Description: Show VRF Information

Syntax:




Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD


S Commandsshow audits tenant vrf

show audits tenant vrf acllog l2show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD acllog <permitDrop> l2 flow vlan <NUMBER>srcintf <srcintf>

Description: L2 flow stats

Syntax:



permitDroppermitDrop

flowi statsflow

vlan infovlan

<vlan>. Number range from=0 to=9223372036854775807<vlan>

source interfacesrcintf

<srcintf><srcintf>


Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD acllog <permitDrop> l2 flow vlan<NUMBER> srcintf <srcintf>


S Commandsshow audits tenant vrf acllog l2

show audits tenant vrf acllog l3show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD acllog <permitDrop> l3 flow srcip <A.B.C.Dor A:B::C:D> dstip <A.B.C.D or A:B::C:D> proto <proto> srcport <srcport> dstport <dstport> srcintf <srcintf>


Syntax:




flow statsflow

source ipsrcip

IP address in format i.i.i.i or IPv6 address in format xxxx:xxxx, xxxx::xxA.B.C.D or A:B::C:D

destination ipdstip


protocolproto

<proto><proto>

source portsrcport

<srcport><srcport>

destination portdstport

<dstport><dstport>


<srcintf><srcintf>


Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD acllog <permitDrop> l3 flow srcip



<A.B.C.D or A:B::C:D> dstip <A.B.C.D or A:B::C:D> proto <proto> srcport <srcport> dstport<dstport> srcintf <srcintf>



show audits tenant vrf detailshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD detail

Description: Show detailed view of VRF

Syntax:




Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD detail


S Commandsshow audits tenant vrf detail

show audits tenant vrf external-l3 bgpshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 bgp

Description: Show command for BGP peers

Syntax:




Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 bgp


S Commandsshow audits tenant vrf external-l3 bgp

show audits tenant vrf external-l3 bgp nodeshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 bgp node <101-4000>

Description: node to filter on

Syntax:



Leaf Range or Leaf Name List<101-4000>


Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 bgp node <101-4000>


S Commandsshow audits tenant vrf external-l3 bgp node

show audits tenant vrf external-l3 eigrpshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 eigrp

Description: Show external l3 EIGRP

Syntax:




Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 eigrp


S Commandsshow audits tenant vrf external-l3 eigrp

show audits tenant vrf external-l3 eigrp detailshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 eigrp detail

Description: Show interanl details

Syntax:




Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 eigrp detail


S Commandsshow audits tenant vrf external-l3 eigrp detail

show audits tenant vrf external-l3 epgshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName>

Description: Show command for external-l3 epgs

Syntax:



Name of the EPG to filter on<epgName>


Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName>


S Commandsshow audits tenant vrf external-l3 epg

show audits tenant vrf external-l3 epg detailshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName> detail

Description: external-l3 epg in detail with operational status

Syntax:





Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName> detail


S Commandsshow audits tenant vrf external-l3 epg detail

show audits tenant vrf external-l3 epg nameshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName> name <epgName>

Description: EPG name to filter on

Syntax:






Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName> name<epgName>


S Commandsshow audits tenant vrf external-l3 epg name

show audits tenant vrf external-l3 epg name detailshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName> name <epgName>detail


Syntax:






Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName> name<epgName> detail


S Commandsshow audits tenant vrf external-l3 epg name detail

show audits tenant vrf external-l3 interfacesshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 interfaces

Description: Show tenant <tenant> vrf <vrf> external l3 interfaces

Syntax:




Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 interfaces


S Commandsshow audits tenant vrf external-l3 interfaces

show audits tenant vrf external-l3 interfaces detailshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 interfaces detail


Syntax:




Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 interfaces detail


S Commandsshow audits tenant vrf external-l3 interfaces detail

show audits tenant vrf external-l3 ospfshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 ospf

Description: Show command for IPv4 and IPv6 external l3 OSPF configuration

Syntax:




Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 ospf


S Commandsshow audits tenant vrf external-l3 ospf

show audits tenant vrf external-l3 ospf detailshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 ospf detail

Description: Show internal details

Syntax:




Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 ospf detail


S Commandsshow audits tenant vrf external-l3 ospf detail

show audits tenant vrf external-l3 static-routeshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route

Description: Show command for external-l3 static routes

Syntax:




Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route


S Commandsshow audits tenant vrf external-l3 static-route

show audits tenant vrf external-l3 static-route detailshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route detail

Description: static-route in detail with operational status

Syntax:




Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route detail


S Commandsshow audits tenant vrf external-l3 static-route detail

show audits tenant vrf external-l3 static-route nodeshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route node


Syntax:



Leaf Range or Leaf Name Listarg


Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route node


S Commandsshow audits tenant vrf external-l3 static-route node

show audits tenant vrf external-l3 static-route node detailshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route node detail


Syntax:





Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route node detail


S Commandsshow audits tenant vrf external-l3 static-route node detail

show audits tenant vrf multicastshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD multicast

Description: Show multicast configuration per VRF

Syntax:




Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD multicast


S Commandsshow audits tenant vrf multicast

show bridge-domainshow bridge-domain WORD


Syntax:



Command Path:

# show bridge-domain WORD


S Commandsshow bridge-domain

show bridge-domain detailshow bridge-domain WORD detail


Syntax:



Command Path:

# show bridge-domain WORD detail


S Commandsshow bridge-domain detail

show callhomeshow callhome common

Description: Show command for callhome

Syntax:

Commoncommon


Command Path:

# show callhome common


S Commandsshow callhome

show callhome common destination-profileshow callhome common destination-profile

Description: Show command for callhome destination-profile

Syntax:

Commoncommon


Command Path:

# show callhome common destination-profile


S Commandsshow callhome common destination-profile

show callhome common query-profileshow callhome common query-profile

Description: Show command for callhome destination-profile

Syntax:

Commoncommon


Command Path:

# show callhome common query-profile


S Commandsshow callhome common query-profile

show callhome common transport-emailshow callhome common transport-email

Description: Show command for callhome transport-email

Syntax:

Commoncommon


Command Path:

# show callhome common transport-email


S Commandsshow callhome common transport-email

show catalogshow catalog

Description: Show catalog information


Command Path:

# show catalog


S Commandsshow catalog

show cli commandshow cli command <WORD> [mode <mode-name>]

Description: Show Commands Syntax

Syntax:

Command Name pattern between single quotesWORD

(Optional) Mode name pattern between single quotes<mode-name>

(Optional) Show Command Detailsdetails


Command Path:

# show cli command <WORD> [mode <mode-name>]


S Commandsshow cli command

show cli internal auditshow cli internal audit

Description: Show Commands Audit


Command Path:

# show cli internal audit


S Commandsshow cli internal audit

show cli internal transactionshow cli internal transaction logs|xml <NUMBER>

Description: Show Transaction Details

Syntax:

Show Transaction Logslogs

Show Transaction XML Postxml

Transaction ID(TID) to grep log lines with similar TIDs. TID can beextracted from the 'show cli internal audit' command. Number rangefrom=0 to=9223372036854775807

<Transaction ID>


Command Path:

# show cli internal transaction logs|xml <NUMBER>


S Commandsshow cli internal transaction

show cli internal usageshow cli internal usage

Description: Show Commands with Usage Callback

Syntax:



Command Path:

# show cli internal usage


S Commandsshow cli internal usage

show cli listshow cli list [mode <mode-name>]

Description: Show all cli-related commands

Syntax:




Command Path:

# show cli list [mode <mode-name>]


S Commandsshow cli list

show cli manpageshow cli manpage <WORD> [mode <mode-name>]

Description: Show Commands ManPage

Syntax:





Command Path:

# show cli manpage <WORD> [mode <mode-name>]


S Commandsshow cli manpage

show cli pathshow cli path <WORD> [mode <mode-name>]

Description: Show Commands Path

Syntax:





Command Path:

# show cli path <WORD> [mode <mode-name>]


S Commandsshow cli path

show clockshow clock

Description: Show clock information


Command Path:

# show clock


S Commandsshow clock

show communication ciphersshow communication ciphers

Description: HTTPS service cipher suite listings


Command Path:

# show communication ciphers


S Commandsshow communication ciphers

show communication controllershow communication controller node-id

Description: Show command for nginx web-requests

Syntax:

node-idnode-id


Command Path:

# show communication controller node-id


S Commandsshow communication controller

show communication httpshow communication http

Description: HTTP service settings


Command Path:

# show communication http


S Commandsshow communication http

show communication httpsshow communication https

Description: HTTPS service settings


Command Path:

# show communication https


S Commandsshow communication https

show communication shellinaboxshow communication shellinabox

Description: Shellinabox service settings


Command Path:

# show communication shellinabox


S Commandsshow communication shellinabox

show communication ssh-serviceshow communication ssh-service

Description: SSH service settings


Command Path:

# show communication ssh-service


S Commandsshow communication ssh-service

show communication telnetshow communication telnet

Description: Telnet service settings


Command Path:

# show communication telnet


S Commandsshow communication telnet

show communication web-requestsshow communication web-requests

Description: Status of last web requests


Command Path:

# show communication web-requests


S Commandsshow communication web-requests

show contract-typeshow contract-type WORD

Description: Show Contracts Information Based on Type

Syntax:

whitelist (permit) or blacklist(deny) or oob-mgmt type of contractWORD


Command Path:

# show contract-type WORD


S Commandsshow contract-type

show contractshow contract WORD

Description: Show Contracts Information

Syntax:



Command Path:

# show contract WORD


S Commandsshow contract

show controllershow controller

Description: Show controller information


Command Path:

# show controller


S Commandsshow controller

show controller detailshow controller detail [id <node-id>]

Description: Detailed controller information

Syntax:

(Optional) Optional Serial numbernode-id


Command Path:

# show controller detail [id <node-id>]


S Commandsshow controller detail

show coresshow cores

Description: Show all core dumps


Command Path:

# show cores


S Commandsshow cores

show cores statusshow cores status

Description: Show exported core status


Command Path:

# show cores status


S Commandsshow cores status

show debug countershow debug <node-name> <process> counter <counterTopics>

Description: Show Counter information

Syntax:

Node name<node-name>

Process name<process>

Counter Topics<counterTopics>


Command Path:

# show debug <node-name> <process> counter <counterTopics>


S Commandsshow debug counter

show debug logshow debug <node-name> <process> log

Description: Show log level information

Syntax:

Node name<node-name>

Process name<process>


Command Path:

# show debug <node-name> <process> log


S Commandsshow debug log

show deployment endpoint nodeshow deployment endpoint node <node>

Description: Node id

Syntax:

<node><node>


Command Path:

# show deployment endpoint node <node>


S Commandsshow deployment endpoint node

show dns-addressshow dns-address

Description: Show dns address information


Command Path:

# show dns-address


S Commandsshow dns-address

show dns-domainshow dns-domain

Description: Show dns domain information


Command Path:

# show dns-domain


S Commandsshow dns-domain

show dot1q-tunnelshow dot1q-tunnel WORD

Description: Show Dot1q-tunnel Information

Syntax:



Command Path:

# show dot1q-tunnel WORD


S Commandsshow dot1q-tunnel

show endpointsshow endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan<NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>]

Description: Show IP endpoints

Syntax:

(Optional) Endpoint Typetype




(Optional) IP Unicast address in format i.i.i.iA.B.C.D

(Optional) IPv6 address in format xxxx:xxxx, xxxx::xxA:B::C:D


Command Path:

# show endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE>] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>]


S Commandsshow endpoints

show endpoints leaf interface ethernetshow endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan<NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] leaf <WORD> interface ethernet ethernet [<fex>/]<slot>/<port>

Description: Show IP endpoints on an interface ethernet

Syntax:







Leaf Number (Max Size 4000). Number range from=0to=9223372036854775807

WORD

Ethernet Rangeethernet [<fex>/]<slot>/<port>


Command Path:

# show endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE>] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] leaf <WORD> interface ethernet ethernet[<fex>/]<slot>/<port>


S Commandsshow endpoints leaf interface ethernet

show endpoints leaf interface port-channelshow endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan<NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] leaf <WORD> interface port-channel <WORD> [fex <NUMBER>]

Description: Show IP endpoints on an interface port-channel

Syntax:








WORD

Port Channel Name (Max Size 64)WORD

(Optional) Fex Id. Number range from=101 to=164<101-164>


Command Path:

# show endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE>] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] leaf <WORD> interface port-channel<WORD> [fex <NUMBER>]


S Commandsshow endpoints leaf interface port-channel

show endpoints vpcshow endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan<NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] vpc context <WORD> <WORD> interface vpc <WORD> [fex<fex>]

Description: Show IP endpoints on vpc

Syntax:







VPC Contextcontext

First VPC leaf (Max Size 4000). Number range from=0to=9223372036854775807

WORD

Second VPC leaf (Max Size 4000). Number range from=0to=9223372036854775807

WORD

VPC Interface nameinterface

VPC Interface namevpc

VPC Name (Max Size 64)WORD

(Optional) Fex Id. Number range from=101 to=164fex


Command Path:

# show endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE>] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] vpc context <WORD> <WORD> interfacevpc <WORD> [fex <fex>]


S Commandsshow endpoints vpc

show epgshow epg WORD


Syntax:



Command Path:

# show epg WORD


S Commandsshow epg

show epg detailshow epg WORD detail

Description: Show detailed view of Application EPg

Syntax:



Command Path:

# show epg WORD detail


S Commandsshow epg detail

show eventsshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] <scope>

Description: Show event information

Syntax:

(Optional) Event code<event-code>

(Optional) Event ID<event-ID>

(Optional) Cause<event-value>

(Optional) Event activity in time interval. Number range from=1 to=59last-minutes <num-minutes>

(Optional) Event activity in time interval. Number range from=1 to=23last-hours <num-hours>

(Optional) Event activity in time interval. Number range from=1 to=999last-days <num-days>

(Optional) Event activity in time intervalstart-time<YYYY-MM-DDTHR:MIN:SEC>

(Optional) Event activity in time intervalend-time<YYYY-MM-DDTHR:MIN:SEC>

(Optional) Detailed event informationdetail



Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] <scope>


S Commandsshow events

show events controllershow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] controller



Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] controller


S Commandsshow events controller

show events controller detailshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] controller detail [id <node-id>]


Syntax:



Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] controller detail [id <node-id>]


S Commandsshow events controller detail

show events leafshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId>

Description: Show command for leaf

Syntax:

Leaf id<leafId>


Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId>


S Commandsshow events leaf

show events leaf fexshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> fex <fexNum>

Description: Show extended chassis information

Syntax:

Leaf id<leafId>

pls enter fex number<fexNum>


Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> fex <fexNum>


S Commandsshow events leaf fex

show events leaf fex moduleshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> fex <fexNum> module <lcSlot>

Description: Show inventory module information

Syntax:

Leaf id<leafId>


please enter the module number<lcSlot>


Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> fex <fexNum> module <lcSlot>


S Commandsshow events leaf fex module

show events leaf interface ethernetshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface ethernet <phyInt>

Description: Ethernet IEEE 802.3z

Syntax:

Leaf id<leafId>

<slot or chassis-number/port or slot number><phyInt>


Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface ethernet <phyInt>


S Commandsshow events leaf interface ethernet

show events leaf interface l3instanceshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface l3instance <l3Inst>

Description: L3 instance

Syntax:

Leaf id<leafId>

<L3 instance number><l3Inst>


Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface l3instance <l3Inst>


S Commandsshow events leaf interface l3instance

show events leaf interface mgmtshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface mgmt <mgmtPort>

Description:Management interface

Syntax:

Leaf id<leafId>

<Management interface number><mgmtPort>


Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface mgmt <mgmtPort>


S Commandsshow events leaf interface mgmt

show events leaf interface portchannelshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface portchannel <portChan>

Description: Port channel interface

Syntax:

Leaf id<leafId>

<Port channel number><portChan>


Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface portchannel <portChan>


S Commandsshow events leaf interface portchannel

show events leaf interface tunnelshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface tunnel <tunnelPort>

Description: Tunnel Interface

Syntax:

Leaf id<leafId>

<Tunnel interface number><tunnelPort>


Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface tunnel <tunnelPort>


S Commandsshow events leaf interface tunnel

show events leaf inventory chassisshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory chassis

Description: Show inventory chassis information

Syntax:

Leaf id<leafId>


Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory chassis


S Commandsshow events leaf inventory chassis

show events leaf inventory fansshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory fans <ftSlot>

Description: Show inventory fan information

Syntax:

Leaf id<leafId>

pls enter fan tray number<ftSlot>


Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory fans <ftSlot>


S Commandsshow events leaf inventory fans

show events leaf inventory moduleshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory module <lcSlot>


Syntax:

Leaf id<leafId>



Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory module <lcSlot>


S Commandsshow events leaf inventory module

show events leaf inventory module fabricportshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory module <lcSlot> fabricport <fabPort>

Description: Show information for fabric port

Syntax:

Leaf id<leafId>


pls enter the fabric port number<fabPort>


Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory module <lcSlot> fabricport<fabPort>


S Commandsshow events leaf inventory module fabricport

show events leaf inventory module leafportshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory module <lcSlot> leafport <leafPort>

Description: Show information for leaf port

Syntax:

Leaf id<leafId>


pls enter the leaf port number<leafPort>


Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory module <lcSlot> leafport<leafPort>


S Commandsshow events leaf inventory module leafport

show events leaf inventory powersupplyshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory powersupply <psuSlot>

Description: Show inventory power supply information

Syntax:

Leaf id<leafId>

pls enter the powersupply number<psuSlot>


Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory powersupply <psuSlot>


S Commandsshow events leaf inventory powersupply

show events leaf inventory supervisorshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory supervisor <supMod>

Description: Show information for supervisor module

Syntax:

Leaf id<leafId>

pls enter the supervisor module number<supMod>


Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory supervisor <supMod>


S Commandsshow events leaf inventory supervisor

show events leaf protocolshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> protocol <protName>

Description: Show command for protocol

Syntax:

Leaf id<leafId>

Protocol name<protName>


Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> protocol <protName>


S Commandsshow events leaf protocol

show events leaf vpcshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> vpc <vpcPort>

Description: Virtual port channel information

Syntax:

Leaf id<leafId>

pls enter virtual port channel number<vpcPort>


Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> vpc <vpcPort>


S Commandsshow events leaf vpc

show events leaf vrfshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> vrf <vrfPort>

Description: Vrf information

Syntax:

Leaf id<leafId>

pls enter vrf name<vrfPort>


Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> vrf <vrfPort>


S Commandsshow events leaf vrf

show events spineshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId>

Description: Show command for spine

Syntax:

Leaf id<leafId>


Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId>


S Commandsshow events spine

show events spine interface ethernetshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> interface ethernet <phyInt>


Syntax:

Leaf id<leafId>



Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> interface ethernet <phyInt>


S Commandsshow events spine interface ethernet

show events spine interface l3instanceshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> interface l3instance <l3Inst>


Syntax:

Leaf id<leafId>



Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> interface l3instance <l3Inst>


S Commandsshow events spine interface l3instance

show events spine interface mgmtshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> interface mgmt <mgmtPort>


Syntax:

Leaf id<leafId>



Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> interface mgmt <mgmtPort>


S Commandsshow events spine interface mgmt

show events spine interface tunnelshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> interface tunnel <tunnelPort>


Syntax:

Leaf id<leafId>



Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> interface tunnel <tunnelPort>


S Commandsshow events spine interface tunnel

show events spine inventory chassisshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory chassis


Syntax:

Leaf id<leafId>


Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory chassis


S Commandsshow events spine inventory chassis

show events spine inventory fabricshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory fabric <fcMod>

Description: Show information for fabric module

Syntax:

Leaf id<leafId>

pls enter the fabric module number<fcMod>


Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory fabric <fcMod>


S Commandsshow events spine inventory fabric

show events spine inventory fansshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory fans <ftSlot>


Syntax:

Leaf id<leafId>



Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory fans <ftSlot>


S Commandsshow events spine inventory fans

show events spine inventory moduleshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory module <lcSlot>


Syntax:

Leaf id<leafId>



Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory module <lcSlot>


S Commandsshow events spine inventory module

show events spine inventory module fabricportshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory module <lcSlot> fabricport <fabPort>


Syntax:

Leaf id<leafId>




Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory module <lcSlot>fabricport <fabPort>


S Commandsshow events spine inventory module fabricport

show events spine inventory powersupplyshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory powersupply <psuSlot>


Syntax:

Leaf id<leafId>



Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory powersupply <psuSlot>


S Commandsshow events spine inventory powersupply

show events spine inventory supervisorshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory supervisor <supMod>


Syntax:

Leaf id<leafId>



Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory supervisor <supMod>


S Commandsshow events spine inventory supervisor

show events spine inventory systemshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory system <sysMod>

Description: Show information for system module

Syntax:

Leaf id<leafId>

pls enter the system module number<sysMod>


Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory system <sysMod>


S Commandsshow events spine inventory system

show events spine protocolshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> protocol <protName>


Syntax:

Leaf id<leafId>



Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> protocol <protName>


S Commandsshow events spine protocol

show events spine vrfshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> vrf <vrfPort>


Syntax:

Leaf id<leafId>



Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> vrf <vrfPort>


S Commandsshow events spine vrf

show events tenantshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD


Syntax:



Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD


S Commandsshow events tenant

show events tenant applicationshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD application WORD


Syntax:




Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD application WORD


S Commandsshow events tenant application

show events tenant application epgshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD application WORD epg WORD


Syntax:





Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD application WORD epg WORD


S Commandsshow events tenant application epg

show events tenant bridge-domainshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD bridge-domain WORD


Syntax:




Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD bridge-domain WORD


S Commandsshow events tenant bridge-domain

show events tenant bridge-domain detailshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD bridge-domain WORD detail


Syntax:




Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD bridge-domain WORD detail


S Commandsshow events tenant bridge-domain detail

show events tenant endpointsshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>]


Syntax:









Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD endpoints [type <type>] [mac <E.E.EEE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6<A:B::C:D>]


S Commandsshow events tenant endpoints

show events tenant endpoints leaf interface ethernetshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] leaf <WORD> interfaceethernet ethernet [<fex>/]<slot>/<port>


Syntax:









WORD



Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD endpoints [type <type>] [mac <E.E.EEE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6<A:B::C:D>] leaf <WORD> interface ethernet ethernet [<fex>/]<slot>/<port>


S Commandsshow events tenant endpoints leaf interface ethernet

show events tenant endpoints leaf interface port-channelshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] leaf <WORD> interfaceport-channel <WORD> [fex <NUMBER>]


Syntax:









WORD




Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD endpoints [type <type>] [mac <E.E.EEE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6<A:B::C:D>] leaf <WORD> interface port-channel <WORD> [fex <NUMBER>]


S Commandsshow events tenant endpoints leaf interface port-channel

show events tenant endpoints vpcshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] vpc context <WORD><WORD> interface vpc <WORD> [fex <fex>]


Syntax:








VPC Contextcontext


WORD


WORD






Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD endpoints [type <type>] [mac <E.E.EEE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6


S Commandsshow events tenant endpoints vpc

<A:B::C:D>] vpc context <WORD> <WORD> interface vpc <WORD> [fex <fex>]


S Commandsshow events tenant endpoints vpc

show events tenant interface bridge-domainshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD interface bridge-domain WORD


Syntax:




Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD interface bridge-domain WORD


S Commandsshow events tenant interface bridge-domain

show events tenant interface bridge-domain detailshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD interface bridge-domain WORD detail


Syntax:




Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD interface bridge-domain WORD detail


S Commandsshow events tenant interface bridge-domain detail

show events tenant multicast-route-mapsshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD multicast-route-maps


Syntax:



Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD multicast-route-maps


S Commandsshow events tenant multicast-route-maps

show events tenant vrfshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD


Syntax:




Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD


S Commandsshow events tenant vrf

show events tenant vrf acllog l2show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD acllog <permitDrop> l2 flow vlan <NUMBER>srcintf <srcintf>


Syntax:




flowi statsflow

vlan infovlan



<srcintf><srcintf>


Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD acllog <permitDrop> l2flow vlan <NUMBER> srcintf <srcintf>


S Commandsshow events tenant vrf acllog l2

show events tenant vrf acllog l3show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD acllog <permitDrop> l3 flow srcip <A.B.C.Dor A:B::C:D> dstip <A.B.C.D or A:B::C:D> proto <proto> srcport <srcport> dstport <dstport> srcintf <srcintf>


Syntax:




flow statsflow

source ipsrcip


destination ipdstip


protocolproto

<proto><proto>

source portsrcport

<srcport><srcport>


<dstport><dstport>


<srcintf><srcintf>


Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD acllog <permitDrop> l3



flow srcip <A.B.C.D or A:B::C:D> dstip <A.B.C.D or A:B::C:D> proto <proto> srcport <srcport>dstport <dstport> srcintf <srcintf>



show events tenant vrf detailshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD detail


Syntax:




Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD detail


S Commandsshow events tenant vrf detail

show events tenant vrf external-l3 bgpshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 bgp


Syntax:




Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 bgp


S Commandsshow events tenant vrf external-l3 bgp

show events tenant vrf external-l3 bgp nodeshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 bgp node <101-4000>


Syntax:





Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 bgp node<101-4000>


S Commandsshow events tenant vrf external-l3 bgp node

show events tenant vrf external-l3 eigrpshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 eigrp


Syntax:




Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 eigrp


S Commandsshow events tenant vrf external-l3 eigrp

show events tenant vrf external-l3 eigrp detailshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 eigrp detail


Syntax:




Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 eigrp detail


S Commandsshow events tenant vrf external-l3 eigrp detail

show events tenant vrf external-l3 epgshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName>


Syntax:





Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName>


S Commandsshow events tenant vrf external-l3 epg

show events tenant vrf external-l3 epg detailshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName> detail


Syntax:





Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName>detail


S Commandsshow events tenant vrf external-l3 epg detail

show events tenant vrf external-l3 epg nameshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName> name <epgName>


Syntax:






Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName>name <epgName>


S Commandsshow events tenant vrf external-l3 epg name

show events tenant vrf external-l3 epg name detailshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName> name <epgName>detail


Syntax:






Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName>name <epgName> detail


S Commandsshow events tenant vrf external-l3 epg name detail

show events tenant vrf external-l3 interfacesshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 interfaces


Syntax:




Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 interfaces


S Commandsshow events tenant vrf external-l3 interfaces

show events tenant vrf external-l3 interfaces detailshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 interfaces detail


Syntax:




Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 interfacesdetail


S Commandsshow events tenant vrf external-l3 interfaces detail

show events tenant vrf external-l3 ospfshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 ospf


Syntax:




Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 ospf


S Commandsshow events tenant vrf external-l3 ospf

show events tenant vrf external-l3 ospf detailshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 ospf detail


Syntax:




Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 ospf detail


S Commandsshow events tenant vrf external-l3 ospf detail

show events tenant vrf external-l3 route-mapshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 route-map [name <l3out name>]

Description: Show command for external-l3 route-map

Syntax:



(Optional) Name of the route-map to filter on<l3out name>


Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 route-map [name<l3out name>]


S Commandsshow events tenant vrf external-l3 route-map

show events tenant vrf external-l3 route-map detailshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 route-map [name <l3out name>]detail

Description: Show external-l3 route-map in detail with operational status

Syntax:





Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 route-map [name<l3out name>] detail


S Commandsshow events tenant vrf external-l3 route-map detail

show events tenant vrf external-l3 static-routeshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route


Syntax:




Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route


S Commandsshow events tenant vrf external-l3 static-route

show events tenant vrf external-l3 static-route detailshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route detail


Syntax:




Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-routedetail


S Commandsshow events tenant vrf external-l3 static-route detail

show events tenant vrf external-l3 static-route nodeshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route node


Syntax:





Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-routenode


S Commandsshow events tenant vrf external-l3 static-route node

show events tenant vrf external-l3 static-route node detailshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route node detail


Syntax:





Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-routenode detail


S Commandsshow events tenant vrf external-l3 static-route node detail

show events tenant vrf multicastshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD multicast


Syntax:




Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD multicast


S Commandsshow events tenant vrf multicast

show external-l2 epgshow external-l2 epg



Command Path:

# show external-l2 epg


S Commandsshow external-l2 epg

show external-l2 epg nameshow external-l2 epg name WORD


Syntax:

Name of the EPG to filter on (Max Size 64)WORD


Command Path:

# show external-l2 epg name WORD


S Commandsshow external-l2 epg name

show external-l2 epg tenantshow external-l2 epg tenant WORD

Description: tenant to filter on

Syntax:



Command Path:

# show external-l2 epg tenant WORD


S Commandsshow external-l2 epg tenant

show external-l3 bgpshow external-l3 bgp



Command Path:

# show external-l3 bgp


S Commandsshow external-l3 bgp

show external-l3 bgp tenantshow external-l3 bgp tenant <WORD>


Syntax:



Command Path:

# show external-l3 bgp tenant <WORD>


S Commandsshow external-l3 bgp tenant

show external-l3 bgp tenant vrfshow external-l3 bgp tenant <WORD> vrf WORD

Description: vrf to filter on

Syntax:




Command Path:

# show external-l3 bgp tenant <WORD> vrf WORD


S Commandsshow external-l3 bgp tenant vrf

show external-l3 bgp tenant vrf nodeshow external-l3 bgp tenant <WORD> vrf WORD node <101-4000>


Syntax:





Command Path:

# show external-l3 bgp tenant <WORD> vrf WORD node <101-4000>


S Commandsshow external-l3 bgp tenant vrf node

show external-l3 eigrpshow external-l3 eigrp

Description: Show command for external-l3 eigrp


Command Path:

# show external-l3 eigrp


S Commandsshow external-l3 eigrp

show external-l3 eigrp detailshow external-l3 eigrp detail



Command Path:

# show external-l3 eigrp detail


S Commandsshow external-l3 eigrp detail

show external-l3 eigrp nodeshow external-l3 eigrp node <101-4000>

Description: Node(s) to filter on

Syntax:

Node Range or Node Name List<101-4000>


Command Path:

# show external-l3 eigrp node <101-4000>


S Commandsshow external-l3 eigrp node

show external-l3 eigrp node detailshow external-l3 eigrp node <101-4000> detail


Syntax:



Command Path:

# show external-l3 eigrp node <101-4000> detail


S Commandsshow external-l3 eigrp node detail

show external-l3 eigrp tenantshow external-l3 eigrp tenant <WORD>

Description: Tenant(s) to filter on

Syntax:



Command Path:

# show external-l3 eigrp tenant <WORD>


S Commandsshow external-l3 eigrp tenant

show external-l3 eigrp tenant detailshow external-l3 eigrp tenant <WORD> detail


Syntax:



Command Path:

# show external-l3 eigrp tenant <WORD> detail


S Commandsshow external-l3 eigrp tenant detail

show external-l3 eigrp tenant vrfshow external-l3 eigrp tenant <WORD> vrf WORD

Description: Vrf(s) to filter on

Syntax:


Name of the VRF(s) to filter on (Max Size 64)WORD


Command Path:

# show external-l3 eigrp tenant <WORD> vrf WORD


S Commandsshow external-l3 eigrp tenant vrf

show external-l3 eigrp tenant vrf detailshow external-l3 eigrp tenant <WORD> vrf WORD detail


Syntax:




Command Path:

# show external-l3 eigrp tenant <WORD> vrf WORD detail


S Commandsshow external-l3 eigrp tenant vrf detail

show external-l3 eigrp tenant vrf nodeshow external-l3 eigrp tenant <WORD> vrf WORD node <101-4000>


Syntax:





Command Path:

# show external-l3 eigrp tenant <WORD> vrf WORD node <101-4000>


S Commandsshow external-l3 eigrp tenant vrf node

show external-l3 eigrp tenant vrf node detailshow external-l3 eigrp tenant <WORD> vrf WORD node <101-4000> detail


Syntax:





Command Path:

# show external-l3 eigrp tenant <WORD> vrf WORD node <101-4000> detail


S Commandsshow external-l3 eigrp tenant vrf node detail

show external-l3 epgshow external-l3 epg



Command Path:

# show external-l3 epg


S Commandsshow external-l3 epg

show external-l3 epg detailshow external-l3 epg detail



Command Path:

# show external-l3 epg detail


S Commandsshow external-l3 epg detail

show external-l3 epg nameshow external-l3 epg name <epgName>


Syntax:



Command Path:

# show external-l3 epg name <epgName>


S Commandsshow external-l3 epg name

show external-l3 epg name detailshow external-l3 epg name <epgName> detail


Syntax:



Command Path:

# show external-l3 epg name <epgName> detail


S Commandsshow external-l3 epg name detail

show external-l3 epg tenantshow external-l3 epg tenant <WORD>


Syntax:



Command Path:

# show external-l3 epg tenant <WORD>


S Commandsshow external-l3 epg tenant

show external-l3 epg tenant detailshow external-l3 epg tenant <WORD> detail


Syntax:



Command Path:

# show external-l3 epg tenant <WORD> detail


S Commandsshow external-l3 epg tenant detail

show external-l3 epg tenant vrfshow external-l3 epg tenant <WORD> vrf WORD


Syntax:




Command Path:

# show external-l3 epg tenant <WORD> vrf WORD


S Commandsshow external-l3 epg tenant vrf

show external-l3 epg tenant vrf detailshow external-l3 epg tenant <WORD> vrf WORD detail


Syntax:




Command Path:

# show external-l3 epg tenant <WORD> vrf WORD detail


S Commandsshow external-l3 epg tenant vrf detail

show external-l3 interfacesshow external-l3 interfaces

Description: Show command for external-l3 interfaces


Command Path:

# show external-l3 interfaces


S Commandsshow external-l3 interfaces

show external-l3 interfaces detailshow external-l3 interfaces detail



Command Path:

# show external-l3 interfaces detail


S Commandsshow external-l3 interfaces detail

show external-l3 interfaces nodeshow external-l3 interfaces node <101-4000>


Syntax:



Command Path:

# show external-l3 interfaces node <101-4000>


S Commandsshow external-l3 interfaces node

show external-l3 interfaces node detailshow external-l3 interfaces node <101-4000> detail


Syntax:



Command Path:

# show external-l3 interfaces node <101-4000> detail


S Commandsshow external-l3 interfaces node detail

show external-l3 interfaces tenantshow external-l3 interfaces tenant <WORD>


Syntax:



Command Path:

# show external-l3 interfaces tenant <WORD>


S Commandsshow external-l3 interfaces tenant

show external-l3 interfaces tenant detailshow external-l3 interfaces tenant <WORD> detail


Syntax:



Command Path:

# show external-l3 interfaces tenant <WORD> detail


S Commandsshow external-l3 interfaces tenant detail

show external-l3 interfaces tenant vrfshow external-l3 interfaces tenant <WORD> vrf WORD


Syntax:




Command Path:

# show external-l3 interfaces tenant <WORD> vrf WORD


S Commandsshow external-l3 interfaces tenant vrf

show external-l3 interfaces tenant vrf detailshow external-l3 interfaces tenant <WORD> vrf WORD detail


Syntax:




Command Path:

# show external-l3 interfaces tenant <WORD> vrf WORD detail


S Commandsshow external-l3 interfaces tenant vrf detail

show external-l3 interfaces tenant vrf nodeshow external-l3 interfaces tenant <WORD> vrf WORD node <101-4000>


Syntax:





Command Path:

# show external-l3 interfaces tenant <WORD> vrf WORD node <101-4000>


S Commandsshow external-l3 interfaces tenant vrf node

show external-l3 interfaces tenant vrf node detailshow external-l3 interfaces tenant <WORD> vrf WORD node <101-4000> detail


Syntax:





Command Path:

# show external-l3 interfaces tenant <WORD> vrf WORD node <101-4000> detail


S Commandsshow external-l3 interfaces tenant vrf node detail

show external-l3 ospfshow external-l3 ospf

Description: Show command for external-l3 ospf


Command Path:

# show external-l3 ospf


S Commandsshow external-l3 ospf

show external-l3 ospf detailshow external-l3 ospf detail



Command Path:

# show external-l3 ospf detail


S Commandsshow external-l3 ospf detail

show external-l3 ospf nodeshow external-l3 ospf node <101-4000>


Syntax:



Command Path:

# show external-l3 ospf node <101-4000>


S Commandsshow external-l3 ospf node

show external-l3 ospf node detailshow external-l3 ospf node <101-4000> detail


Syntax:



Command Path:

# show external-l3 ospf node <101-4000> detail


S Commandsshow external-l3 ospf node detail

show external-l3 ospf tenantshow external-l3 ospf tenant <WORD>


Syntax:



Command Path:

# show external-l3 ospf tenant <WORD>


S Commandsshow external-l3 ospf tenant

show external-l3 ospf tenant detailshow external-l3 ospf tenant <WORD> detail


Syntax:



Command Path:

# show external-l3 ospf tenant <WORD> detail


S Commandsshow external-l3 ospf tenant detail

show external-l3 ospf tenant vrfshow external-l3 ospf tenant <WORD> vrf WORD


Syntax:




Command Path:

# show external-l3 ospf tenant <WORD> vrf WORD


S Commandsshow external-l3 ospf tenant vrf

show external-l3 ospf tenant vrf detailshow external-l3 ospf tenant <WORD> vrf WORD detail


Syntax:




Command Path:

# show external-l3 ospf tenant <WORD> vrf WORD detail


S Commandsshow external-l3 ospf tenant vrf detail

show external-l3 ospf tenant vrf nodeshow external-l3 ospf tenant <WORD> vrf WORD node <101-4000>


Syntax:





Command Path:

# show external-l3 ospf tenant <WORD> vrf WORD node <101-4000>


S Commandsshow external-l3 ospf tenant vrf node

show external-l3 ospf tenant vrf node detailshow external-l3 ospf tenant <WORD> vrf WORD node <101-4000> detail


Syntax:





Command Path:

# show external-l3 ospf tenant <WORD> vrf WORD node <101-4000> detail


S Commandsshow external-l3 ospf tenant vrf node detail

show external-l3 route-mapshow external-l3 route-map



Command Path:

# show external-l3 route-map


S Commandsshow external-l3 route-map

show external-l3 route-map detailshow external-l3 route-map detail

Description: Route-map in detail with operational status


Command Path:

# show external-l3 route-map detail


S Commandsshow external-l3 route-map detail

show external-l3 route-map nameshow external-l3 route-map name <l3out name>

Description: Route-map name to filter on

Syntax:

Name of the route-map to filter on<l3out name>


Command Path:

# show external-l3 route-map name <l3out name>


S Commandsshow external-l3 route-map name

show external-l3 route-map name detailshow external-l3 route-map name <l3out name> detail


Syntax:

Name of the route-map to filter on<l3out name>


Command Path:

# show external-l3 route-map name <l3out name> detail


S Commandsshow external-l3 route-map name detail

show external-l3 route-map tenantshow external-l3 route-map tenant <WORD>


Syntax:



Command Path:

# show external-l3 route-map tenant <WORD>


S Commandsshow external-l3 route-map tenant

show external-l3 route-map tenant detailshow external-l3 route-map tenant <WORD> detail


Syntax:



Command Path:

# show external-l3 route-map tenant <WORD> detail


S Commandsshow external-l3 route-map tenant detail

show external-l3 route-map tenant vrfshow external-l3 route-map tenant <WORD> vrf WORD


Syntax:




Command Path:

# show external-l3 route-map tenant <WORD> vrf WORD


S Commandsshow external-l3 route-map tenant vrf

show external-l3 route-map tenant vrf detailshow external-l3 route-map tenant <WORD> vrf WORD detail


Syntax:




Command Path:

# show external-l3 route-map tenant <WORD> vrf WORD detail


S Commandsshow external-l3 route-map tenant vrf detail

show external-l3 route-map tenant vrf nodeshow external-l3 route-map tenant <WORD> vrf WORD node


Syntax:





Command Path:

# show external-l3 route-map tenant <WORD> vrf WORD node


S Commandsshow external-l3 route-map tenant vrf node

show external-l3 route-map tenant vrf node detailshow external-l3 route-map tenant <WORD> vrf WORD node detail


Syntax:





Command Path:

# show external-l3 route-map tenant <WORD> vrf WORD node detail


S Commandsshow external-l3 route-map tenant vrf node detail

show external-l3 static-routeshow external-l3 static-route



Command Path:

# show external-l3 static-route


S Commandsshow external-l3 static-route

show external-l3 static-route detailshow external-l3 static-route detail



Command Path:

# show external-l3 static-route detail


S Commandsshow external-l3 static-route detail

show external-l3 static-route nodeshow external-l3 static-route node


Syntax:



Command Path:

# show external-l3 static-route node


S Commandsshow external-l3 static-route node

show external-l3 static-route node detailshow external-l3 static-route node detail


Syntax:



Command Path:

# show external-l3 static-route node detail


S Commandsshow external-l3 static-route node detail

show external-l3 static-route tenantshow external-l3 static-route tenant <WORD>


Syntax:



Command Path:

# show external-l3 static-route tenant <WORD>


S Commandsshow external-l3 static-route tenant

show external-l3 static-route tenant detailshow external-l3 static-route tenant <WORD> detail


Syntax:



Command Path:

# show external-l3 static-route tenant <WORD> detail


S Commandsshow external-l3 static-route tenant detail

show external-l3 static-route tenant vrfshow external-l3 static-route tenant <WORD> vrf WORD


Syntax:




Command Path:

# show external-l3 static-route tenant <WORD> vrf WORD


S Commandsshow external-l3 static-route tenant vrf

show external-l3 static-route tenant vrf detailshow external-l3 static-route tenant <WORD> vrf WORD detail


Syntax:




Command Path:

# show external-l3 static-route tenant <WORD> vrf WORD detail


S Commandsshow external-l3 static-route tenant vrf detail

show external-l3 static-route tenant vrf nodeshow external-l3 static-route tenant <WORD> vrf WORD node


Syntax:





Command Path:

# show external-l3 static-route tenant <WORD> vrf WORD node


S Commandsshow external-l3 static-route tenant vrf node

show external-l3 static-route tenant vrf node detailshow external-l3 static-route tenant <WORD> vrf WORD node detail


Syntax:





Command Path:

# show external-l3 static-route tenant <WORD> vrf WORD node detail


S Commandsshow external-l3 static-route tenant vrf node detail

show fabric-recovery statusshow fabric-recovery status

Description: Show fabric recovery status


Command Path:

# show fabric-recovery status


S Commandsshow fabric-recovery status

show faultsshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes/no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] <scope>

Description: Show fault information

Syntax:

(Optional) Historical informationhistory

(Optional) Fault code<fault-code>

(Optional) Fault ID<fault-ID>

(Optional) Acknowledgment status<yes/no>

(Optional) Lifecycle state<lc-state>

(Optional) Severity<severity-value>

(Optional) Minimum severity<severity-value>

(Optional) Type<fault-type>

(Optional) Cause<fault-value>

(Optional) Fault activity in time interval. Number range from=1 to=59last-minutes <num-minutes>

(Optional) Fault activity in time interval. Number range from=1 to=23last-hours <num-hours>

(Optional) Fault activity in time interval. Number range from=1 to=999last-days <num-days>

(Optional) Fault activity in time intervalstart-time<YYYY-MM-DDTHR:MIN:SEC>

(Optional) Fault activity in time intervalend-time<YYYY-MM-DDTHR:MIN:SEC>

(Optional) Detailed faults informationdetail




S Commandsshow faults

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes/no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-timestart-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail]<scope>


S Commandsshow faults

show faults controllershow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] controller



Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] controller


S Commandsshow faults controller

show faults controller detailshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] controller detail [id <node-id>]


Syntax:



Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] controller detail [id<node-id>]


S Commandsshow faults controller detail

show faults l4l7-clustershow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] l4l7-cluster [tenant <Tenant Name>] [cluster <Device Cluster Name>]

Description: Show L4 L7 Device information

Syntax:

(Optional) Name of TenantTenant Name

(Optional) Name of DeviceDevice Cluster Name


Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] l4l7-cluster [tenant<Tenant Name>] [cluster <Device Cluster Name>]


S Commandsshow faults l4l7-cluster

show faults l4l7-graphshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] l4l7-graph [tenant <Tenant Name>] [graph <Graph Name>]

Description: Show L4 L7 Graph information

Syntax:

(Optional) Name of Tenant<Tenant Name>

(Optional) Name of Graph<Graph Name>


Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] l4l7-graph [tenant<Tenant Name>] [graph <Graph Name>]


S Commandsshow faults l4l7-graph

show faults leafshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId>


Syntax:

Leaf id<leafId>


Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId>


S Commandsshow faults leaf

show faults leaf fexshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> fex <fexNum>


Syntax:

Leaf id<leafId>



Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> fex<fexNum>


S Commandsshow faults leaf fex

show faults leaf fex moduleshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> fex <fexNum> module <lcSlot>


Syntax:

Leaf id<leafId>




Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> fex<fexNum> module <lcSlot>


S Commandsshow faults leaf fex module

show faults leaf interface ethernetshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface ethernet <phyInt>


Syntax:

Leaf id<leafId>



Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interfaceethernet <phyInt>


S Commandsshow faults leaf interface ethernet

show faults leaf interface l3instanceshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface l3instance <l3Inst>


Syntax:

Leaf id<leafId>



Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interfacel3instance <l3Inst>


S Commandsshow faults leaf interface l3instance

show faults leaf interface mgmtshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface mgmt <mgmtPort>


Syntax:

Leaf id<leafId>



Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interfacemgmt <mgmtPort>


S Commandsshow faults leaf interface mgmt

show faults leaf interface portchannelshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface portchannel <portChan>


Syntax:

Leaf id<leafId>



Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interfaceportchannel <portChan>


S Commandsshow faults leaf interface portchannel

show faults leaf interface tunnelshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface tunnel <tunnelPort>


Syntax:

Leaf id<leafId>



Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interfacetunnel <tunnelPort>


S Commandsshow faults leaf interface tunnel

show faults leaf inventory chassisshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory chassis


Syntax:

Leaf id<leafId>


Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventorychassis


S Commandsshow faults leaf inventory chassis

show faults leaf inventory fansshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory fans <ftSlot>


Syntax:

Leaf id<leafId>



Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventoryfans <ftSlot>


S Commandsshow faults leaf inventory fans

show faults leaf inventory moduleshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory module <lcSlot>


Syntax:

Leaf id<leafId>



Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventorymodule <lcSlot>


S Commandsshow faults leaf inventory module

show faults leaf inventory module fabricportshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory module <lcSlot> fabricport <fabPort>


Syntax:

Leaf id<leafId>




Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventorymodule <lcSlot> fabricport <fabPort>


S Commandsshow faults leaf inventory module fabricport

show faults leaf inventory module leafportshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory module <lcSlot> leafport <leafPort>


Syntax:

Leaf id<leafId>




Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventorymodule <lcSlot> leafport <leafPort>


S Commandsshow faults leaf inventory module leafport

show faults leaf inventory powersupplyshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory powersupply <psuSlot>


Syntax:

Leaf id<leafId>



Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventorypowersupply <psuSlot>


S Commandsshow faults leaf inventory powersupply

show faults leaf inventory supervisorshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory supervisor <supMod>


Syntax:

Leaf id<leafId>



Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventorysupervisor <supMod>


S Commandsshow faults leaf inventory supervisor

show faults leaf protocolshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> protocol <protName>


Syntax:

Leaf id<leafId>



Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> protocol<protName>


S Commandsshow faults leaf protocol

show faults leaf vpcshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> vpc <vpcPort>


Syntax:

Leaf id<leafId>



Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> vpc<vpcPort>


S Commandsshow faults leaf vpc

show faults leaf vrfshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> vrf <vrfPort>


Syntax:

Leaf id<leafId>



Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> vrf<vrfPort>


S Commandsshow faults leaf vrf

show faults microsoft domainshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] microsoft domain

Description: Show Microsoft domain information


Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] microsoft domain


S Commandsshow faults microsoft domain

show faults microsoft domain nameshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] microsoft domain name <WORD>

Description:Microsoft domain name

Syntax:

Microsoft domain nameWORD


Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] microsoft domain name<WORD>


S Commandsshow faults microsoft domain name

show faults microsoft domain name hypervshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] microsoft domain name <WORD> hyperv <WORD>

Description: Show Microsoft Hypervisor information

Syntax:


HyperV hostnameWORD


Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] microsoft domain name<WORD> hyperv <WORD>


S Commandsshow faults microsoft domain name hyperv

show faults microsoft domain name port-groupshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] microsoft domain name <WORD> port-group

Description: Show Microsoft port group information

Syntax:



Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] microsoft domain name<WORD> port-group


S Commandsshow faults microsoft domain name port-group

show faults microsoft domain name scvmmshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] microsoft domain name <WORD> scvmm <hostname|ip>

Description: Show Microsoft SCVMM information

Syntax:


SCVMM hostname or IP<hostname|ip>


Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] microsoft domain name<WORD> scvmm <hostname|ip>


S Commandsshow faults microsoft domain name scvmm

show faults microsoft domain name vmshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] microsoft domain name <WORD> vm

Description: Show Microsoft VM information

Syntax:



Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] microsoft domain name<WORD> vm


S Commandsshow faults microsoft domain name vm

show faults microsoft domain name vm nameshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] microsoft domain name <WORD> vm name <WORD>

Description: Show detailed Microsoft VM information

Syntax:


VM NameWORD


Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] microsoft domain name<WORD> vm name <WORD>


S Commandsshow faults microsoft domain name vm name

show faults spineshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId>


Syntax:

Leaf id<leafId>


Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId>


S Commandsshow faults spine

show faults spine interface ethernetshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> interface ethernet <phyInt>


Syntax:

Leaf id<leafId>



Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> interfaceethernet <phyInt>


S Commandsshow faults spine interface ethernet

show faults spine interface l3instanceshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> interface l3instance <l3Inst>


Syntax:

Leaf id<leafId>



Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> interfacel3instance <l3Inst>


S Commandsshow faults spine interface l3instance

show faults spine interface mgmtshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> interface mgmt <mgmtPort>


Syntax:

Leaf id<leafId>



Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> interfacemgmt <mgmtPort>


S Commandsshow faults spine interface mgmt

show faults spine interface tunnelshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> interface tunnel <tunnelPort>


Syntax:

Leaf id<leafId>



Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> interfacetunnel <tunnelPort>


S Commandsshow faults spine interface tunnel

show faults spine inventory chassisshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory chassis


Syntax:

Leaf id<leafId>


Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventorychassis


S Commandsshow faults spine inventory chassis

show faults spine inventory fabricshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory fabric <fcMod>


Syntax:

Leaf id<leafId>



Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventoryfabric <fcMod>


S Commandsshow faults spine inventory fabric

show faults spine inventory fansshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory fans <ftSlot>


Syntax:

Leaf id<leafId>



Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventoryfans <ftSlot>


S Commandsshow faults spine inventory fans

show faults spine inventory moduleshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory module <lcSlot>


Syntax:

Leaf id<leafId>



Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventorymodule <lcSlot>


S Commandsshow faults spine inventory module

show faults spine inventory module fabricportshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory module <lcSlot> fabricport <fabPort>


Syntax:

Leaf id<leafId>




Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventorymodule <lcSlot> fabricport <fabPort>


S Commandsshow faults spine inventory module fabricport

show faults spine inventory powersupplyshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory powersupply <psuSlot>


Syntax:

Leaf id<leafId>



Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventorypowersupply <psuSlot>


S Commandsshow faults spine inventory powersupply

show faults spine inventory supervisorshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory supervisor <supMod>


Syntax:

Leaf id<leafId>



Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventorysupervisor <supMod>


S Commandsshow faults spine inventory supervisor

show faults spine inventory systemshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory system <sysMod>


Syntax:

Leaf id<leafId>



Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventorysystem <sysMod>


S Commandsshow faults spine inventory system

show faults spine protocolshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> protocol <protName>


Syntax:

Leaf id<leafId>



Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> protocol<protName>


S Commandsshow faults spine protocol

show faults spine vrfshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> vrf <vrfPort>


Syntax:

Leaf id<leafId>



Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> vrf<vrfPort>


S Commandsshow faults spine vrf

show faults tenantshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD


Syntax:



Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD


S Commandsshow faults tenant

show faults tenant applicationshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD application WORD


Syntax:




Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD applicationWORD


S Commandsshow faults tenant application

show faults tenant application epgshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD application WORD epg WORD


Syntax:





Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD applicationWORD epg WORD


S Commandsshow faults tenant application epg

show faults tenant bridge-domainshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD bridge-domain WORD


Syntax:




Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORDbridge-domain WORD


S Commandsshow faults tenant bridge-domain

show faults tenant bridge-domain detailshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD bridge-domain WORD detail


Syntax:




Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORDbridge-domain WORD detail


S Commandsshow faults tenant bridge-domain detail

show faults tenant interface bridge-domainshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD interface bridge-domain WORD


Syntax:




Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD interfacebridge-domain WORD


S Commandsshow faults tenant interface bridge-domain

show faults tenant interface bridge-domain detailshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD interface bridge-domain WORD detail


Syntax:




Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD interfacebridge-domain WORD detail


S Commandsshow faults tenant interface bridge-domain detail

show faults tenant multicast-route-mapsshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD multicast-route-maps


Syntax:



Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORDmulticast-route-maps


S Commandsshow faults tenant multicast-route-maps

show faults tenant vrfshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD


Syntax:




Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD


S Commandsshow faults tenant vrf

show faults tenant vrf acllog l2show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD acllog <permitDrop> l2 flow vlan <NUMBER>srcintf <srcintf>


Syntax:




flowi statsflow

vlan infovlan



<srcintf><srcintf>


Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORDacllog <permitDrop> l2 flow vlan <NUMBER> srcintf <srcintf>


S Commandsshow faults tenant vrf acllog l2

show faults tenant vrf acllog l3show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD acllog <permitDrop> l3 flow srcip <A.B.C.Dor A:B::C:D> dstip <A.B.C.D or A:B::C:D> proto <proto> srcport <srcport> dstport <dstport> srcintf <srcintf>


Syntax:




flow statsflow

source ipsrcip


destination ipdstip


protocolproto

<proto><proto>

source portsrcport

<srcport><srcport>


<dstport><dstport>


<srcintf><srcintf>


Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>]



[severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORDacllog <permitDrop> l3 flow srcip <A.B.C.D or A:B::C:D> dstip <A.B.C.D or A:B::C:D> proto<proto> srcport <srcport> dstport <dstport> srcintf <srcintf>



show faults tenant vrf detailshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD detail


Syntax:




Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORDdetail


S Commandsshow faults tenant vrf detail

show faults tenant vrf external-l3 bgpshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 bgp


Syntax:




Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORDexternal-l3 bgp


S Commandsshow faults tenant vrf external-l3 bgp

show faults tenant vrf external-l3 bgp nodeshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 bgp node <101-4000>


Syntax:





Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORDexternal-l3 bgp node <101-4000>


S Commandsshow faults tenant vrf external-l3 bgp node

show faults tenant vrf external-l3 eigrpshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 eigrp


Syntax:




Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORDexternal-l3 eigrp


S Commandsshow faults tenant vrf external-l3 eigrp

show faults tenant vrf external-l3 eigrp detailshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 eigrp detail


Syntax:




Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORDexternal-l3 eigrp detail


S Commandsshow faults tenant vrf external-l3 eigrp detail

show faults tenant vrf external-l3 epgshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName>


Syntax:





Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORDexternal-l3 epg <epgName>


S Commandsshow faults tenant vrf external-l3 epg

show faults tenant vrf external-l3 epg detailshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName> detail


Syntax:





Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORDexternal-l3 epg <epgName> detail


S Commandsshow faults tenant vrf external-l3 epg detail

show faults tenant vrf external-l3 epg nameshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName> name <epgName>


Syntax:






Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORDexternal-l3 epg <epgName> name <epgName>


S Commandsshow faults tenant vrf external-l3 epg name

show faults tenant vrf external-l3 epg name detailshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName> name <epgName>detail


Syntax:






Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORDexternal-l3 epg <epgName> name <epgName> detail


S Commandsshow faults tenant vrf external-l3 epg name detail

show faults tenant vrf external-l3 interfacesshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 interfaces


Syntax:




Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORDexternal-l3 interfaces


S Commandsshow faults tenant vrf external-l3 interfaces

show faults tenant vrf external-l3 interfaces detailshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 interfaces detail


Syntax:




Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORDexternal-l3 interfaces detail


S Commandsshow faults tenant vrf external-l3 interfaces detail

show faults tenant vrf external-l3 ospfshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 ospf


Syntax:




Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORDexternal-l3 ospf


S Commandsshow faults tenant vrf external-l3 ospf

show faults tenant vrf external-l3 ospf detailshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 ospf detail


Syntax:




Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORDexternal-l3 ospf detail


S Commandsshow faults tenant vrf external-l3 ospf detail

show faults tenant vrf external-l3 static-routeshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route


Syntax:




Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORDexternal-l3 static-route


S Commandsshow faults tenant vrf external-l3 static-route

show faults tenant vrf external-l3 static-route detailshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route detail


Syntax:




Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORDexternal-l3 static-route detail


S Commandsshow faults tenant vrf external-l3 static-route detail

show faults tenant vrf external-l3 static-route nodeshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route node


Syntax:





Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORDexternal-l3 static-route node


S Commandsshow faults tenant vrf external-l3 static-route node

show faults tenant vrf external-l3 static-route node detailshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route node detail


Syntax:





Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORDexternal-l3 static-route node detail


S Commandsshow faults tenant vrf external-l3 static-route node detail

show faults tenant vrf multicastshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD multicast


Syntax:




Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORDmulticast


S Commandsshow faults tenant vrf multicast

show faults vmware domainshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] vmware domain

Description: Show VMware domain information


Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] vmware domain


S Commandsshow faults vmware domain

show faults vmware domain nameshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] vmware domain name <name>

Description: VMware domain name

Syntax:

VMware domain name<name>


Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] vmware domain name<name>


S Commandsshow faults vmware domain name

show faults vmware domain name epgshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] vmware domain name <name> epg

Description: Show VMware domain EPG details

Syntax:



Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] vmware domain name<name> epg


S Commandsshow faults vmware domain name epg

show faults vmware domain name esxshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] vmware domain name <name> esx <esx-ip>

Description: Show VMware ESX information

Syntax:


ESX IP<esx-ip>


Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] vmware domain name<name> esx <esx-ip>


S Commandsshow faults vmware domain name esx

show faults vmware domain name port-groupshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] vmware domain name <name> port-group

Description: Show VMware port group information

Syntax:



Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] vmware domain name<name> port-group


S Commandsshow faults vmware domain name port-group

show faults vmware domain name trunk-portgroupshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] vmware domain name <name> trunk-portgroup [name <name>]

Description: Show VMware domain trunk portgroup details

Syntax:


(Optional) trunk portgroup name<name>


Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] vmware domain name<name> trunk-portgroup [name <name>]


S Commandsshow faults vmware domain name trunk-portgroup

show faults vmware domain name vcentershow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] vmware domain name <name> vcenter <hostname|ip>

Description: VMware vCenter ip or hostname

Syntax:


vCenter hostname or IP<hostname|ip>


Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] vmware domain name<name> vcenter <hostname|ip>


S Commandsshow faults vmware domain name vcenter

show faults vmware domain name vmshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] vmware domain name <name> vm

Description: Show VMware VM information

Syntax:



Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] vmware domain name<name> vm


S Commandsshow faults vmware domain name vm

show faults vmware domain name vm nameshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] vmware domain name <name> vm name <vm-name>

Description: Show detailed VMware VM information

Syntax:


VM Name<vm-name>


Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] vmware domain name<name> vm name <vm-name>


S Commandsshow faults vmware domain name vm name

show fipsshow fips <status>

Description: Show FIPS information

Syntax:

Show FIPS informationstatus


Command Path:

# show fips <status>


S Commandsshow fips

show firmware repositoryshow firmware repository

Description: Show firmware images present in repository


Command Path:

# show firmware repository


S Commandsshow firmware repository

show firmware repository detailshow firmware repository detail

Description: Detailed repository information


Command Path:

# show firmware repository detail


S Commandsshow firmware repository detail

show firmware upgrade statusshow firmware upgrade status

Description: Upgrade status of all controllers and switches


Command Path:

# show firmware upgrade status


S Commandsshow firmware upgrade status

show firmware upgrade status controller-groupshow firmware upgrade status controller-group

Description: Controller-group upgrade status


Command Path:

# show firmware upgrade status controller-group


S Commandsshow firmware upgrade status controller-group

show firmware upgrade status controller-group detailshow firmware upgrade status controller-group detail

Description: Detailed upgrade status


Command Path:

# show firmware upgrade status controller-group detail


S Commandsshow firmware upgrade status controller-group detail

show firmware upgrade status detailshow firmware upgrade status detail

Description: Detailed upgrade status information


Command Path:

# show firmware upgrade status detail


S Commandsshow firmware upgrade status detail

show firmware upgrade status switch-groupshow firmware upgrade status switch-group <WORD>

Description: Switch-group upgrade status

Syntax:

switch-group name (Max Size 64)WORD


Command Path:

# show firmware upgrade status switch-group <WORD>


S Commandsshow firmware upgrade status switch-group

show firmware upgrade status switch-group detailshow firmware upgrade status switch-group <WORD> detail

Description: Detailed upgrade status

Syntax:



Command Path:

# show firmware upgrade status switch-group <WORD> detail


S Commandsshow firmware upgrade status switch-group detail

show flow exportershow flow exporter

Description: Show Netflow exporter information


Command Path:

# show flow exporter


S Commandsshow flow exporter

show flow exporter infrashow flow exporter infra WORD [detail]

Description: Show flow exporter infra information

Syntax:

Exporter NameWORD

(Optional) detaildetail


Command Path:

# show flow exporter infra WORD [detail]


S Commandsshow flow exporter infra

show flow exporter tenantshow flow exporter tenant <WORD> WORD [detail]

Description: Show flow exporter tenant information

Syntax:

Optional tenant nameWORD

Exporter NameWORD



Command Path:

# show flow exporter tenant <WORD> WORD [detail]


S Commandsshow flow exporter tenant

show flow monitorshow flow monitor

Description: Show Netflow Monitor Information


Command Path:

# show flow monitor


S Commandsshow flow monitor

show flow monitor infrashow flow monitor infra WORD [detail]

Description: Show Netflow Monitor Information for infra

Syntax:

Optional Monitor NameWORD



Command Path:

# show flow monitor infra WORD [detail]


S Commandsshow flow monitor infra

show flow monitor tenantshow flow monitor tenant <WORD> WORD [detail]

Description: Show Netflow Monitor Information for the specified tenant

Syntax:

Specify tenant nameWORD

Optional Monitor NameWORD



Command Path:

# show flow monitor tenant <WORD> WORD [detail]


S Commandsshow flow monitor tenant

show flow node-policyshow flow node-policy [name <WORD>]

Description: Show Netflow Node Policy Information

Syntax:

(Optional) Optional Node Policy NameWORD


Command Path:

# show flow node-policy [name <WORD>]


S Commandsshow flow node-policy

show flow node-policy detailshow flow node-policy [name <WORD>] detail

Description: Show Netflow Node Policy Detailed Information

Syntax:

(Optional) Optional Node Policy NameWORD


Command Path:

# show flow node-policy [name <WORD>] detail


S Commandsshow flow node-policy detail

show flow recordshow flow record

Description: Show Netflow record information


Command Path:

# show flow record


S Commandsshow flow record

show flow record infrashow flow record infra WORD [detail]

Description: Show flow record infra information

Syntax:

Record NameWORD



Command Path:

# show flow record infra WORD [detail]


S Commandsshow flow record infra

show flow record tenantshow flow record tenant [record-name <recordName>] <tenantName> WORD [detail]

Description: Show flow record tenant information

Syntax:

(Optional) Optional record namerecordName

Optional tenant nametenantName

Record NameWORD



Command Path:

# show flow record tenant [record-name <recordName>] <tenantName> WORD [detail]


S Commandsshow flow record tenant

show flow vm-exportershow flow vm-exporter WORD

Description: Show NetFlow Exporter information for VM Networking

Syntax:

NetFlow Exporter NameWORD


Command Path:

# show flow vm-exporter WORD


S Commandsshow flow vm-exporter

show healthshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time end-time <YYYY-MM-DDTHR:MIN:SEC>] <scope>

Description: Show health score information

Syntax:

(Optional) Historical informationhistory

(Optional) Minimum change in health score percentage. Number rangefrom=-100 to=9999

min-change <percentage change>

(Optional) Maximum health score. Number range from=0 to=100max-hs <maximum health-score>

(Optional) Health activity in time intervalstart-time<YYYY-MM-DDTHR:MIN:SEC>

(Optional) Health activity in time intervalend-time<YYYY-MM-DDTHR:MIN:SEC>



Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time end-time <YYYY-MM-DDTHR:MIN:SEC>] <scope>


S Commandsshow health

show health leafshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId>


Syntax:

Leaf id<leafId>


Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId>


S Commandsshow health leaf

show health leaf fexshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> fex <fexNum>


Syntax:

Leaf id<leafId>



Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> fex <fexNum>


S Commandsshow health leaf fex

show health leaf fex moduleshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> fex <fexNum> module <lcSlot>


Syntax:

Leaf id<leafId>




Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> fex <fexNum>module <lcSlot>


S Commandsshow health leaf fex module

show health leaf interface ethernetshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> interface ethernet <phyInt>


Syntax:

Leaf id<leafId>



Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> interface ethernet<phyInt>


S Commandsshow health leaf interface ethernet

show health leaf interface l3instanceshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> interface l3instance <l3Inst>


Syntax:

Leaf id<leafId>



Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> interface l3instance<l3Inst>


S Commandsshow health leaf interface l3instance

show health leaf interface mgmtshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> interface mgmt <mgmtPort>


Syntax:

Leaf id<leafId>



Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> interface mgmt<mgmtPort>


S Commandsshow health leaf interface mgmt

show health leaf interface portchannelshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> interface portchannel <portChan>


Syntax:

Leaf id<leafId>



Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> interfaceportchannel <portChan>


S Commandsshow health leaf interface portchannel

show health leaf interface tunnelshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> interface tunnel <tunnelPort>


Syntax:

Leaf id<leafId>



Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> interface tunnel<tunnelPort>


S Commandsshow health leaf interface tunnel

show health leaf inventory chassisshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> inventory chassis


Syntax:

Leaf id<leafId>


Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> inventory chassis


S Commandsshow health leaf inventory chassis

show health leaf inventory fansshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> inventory fans <ftSlot>


Syntax:

Leaf id<leafId>



Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> inventory fans<ftSlot>


S Commandsshow health leaf inventory fans

show health leaf inventory moduleshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> inventory module <lcSlot>


Syntax:

Leaf id<leafId>



Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> inventory module<lcSlot>


S Commandsshow health leaf inventory module

show health leaf inventory module fabricportshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> inventory module <lcSlot> fabricport <fabPort>


Syntax:

Leaf id<leafId>




Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> inventory module<lcSlot> fabricport <fabPort>


S Commandsshow health leaf inventory module fabricport

show health leaf inventory module leafportshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> inventory module <lcSlot> leafport <leafPort>


Syntax:

Leaf id<leafId>




Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> inventory module<lcSlot> leafport <leafPort>


S Commandsshow health leaf inventory module leafport

show health leaf inventory powersupplyshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> inventory powersupply <psuSlot>


Syntax:

Leaf id<leafId>



Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> inventorypowersupply <psuSlot>


S Commandsshow health leaf inventory powersupply

show health leaf inventory supervisorshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> inventory supervisor <supMod>


Syntax:

Leaf id<leafId>



Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> inventory supervisor<supMod>


S Commandsshow health leaf inventory supervisor

show health leaf protocolshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> protocol <protName>


Syntax:

Leaf id<leafId>



Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> protocol <protName>


S Commandsshow health leaf protocol

show health leaf vpcshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> vpc <vpcPort>


Syntax:

Leaf id<leafId>



Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> vpc <vpcPort>


S Commandsshow health leaf vpc

show health leaf vrfshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> vrf <vrfPort>


Syntax:

Leaf id<leafId>



Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> vrf <vrfPort>


S Commandsshow health leaf vrf

show health spineshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId>


Syntax:

Leaf id<leafId>


Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId>


S Commandsshow health spine

show health spine interface ethernetshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> interface ethernet <phyInt>


Syntax:

Leaf id<leafId>



Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> interface ethernet<phyInt>


S Commandsshow health spine interface ethernet

show health spine interface l3instanceshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> interface l3instance <l3Inst>


Syntax:

Leaf id<leafId>



Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> interfacel3instance <l3Inst>


S Commandsshow health spine interface l3instance

show health spine interface mgmtshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> interface mgmt <mgmtPort>


Syntax:

Leaf id<leafId>



Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> interface mgmt<mgmtPort>


S Commandsshow health spine interface mgmt

show health spine interface tunnelshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> interface tunnel <tunnelPort>


Syntax:

Leaf id<leafId>



Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> interface tunnel<tunnelPort>


S Commandsshow health spine interface tunnel

show health spine inventory chassisshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> inventory chassis


Syntax:

Leaf id<leafId>


Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> inventory chassis


S Commandsshow health spine inventory chassis

show health spine inventory fabricshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> inventory fabric <fcMod>


Syntax:

Leaf id<leafId>



Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> inventory fabric<fcMod>


S Commandsshow health spine inventory fabric

show health spine inventory fansshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> inventory fans <ftSlot>


Syntax:

Leaf id<leafId>



Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> inventory fans<ftSlot>


S Commandsshow health spine inventory fans

show health spine inventory moduleshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> inventory module <lcSlot>


Syntax:

Leaf id<leafId>



Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> inventory module<lcSlot>


S Commandsshow health spine inventory module

show health spine inventory module fabricportshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> inventory module <lcSlot> fabricport <fabPort>


Syntax:

Leaf id<leafId>




Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> inventory module<lcSlot> fabricport <fabPort>


S Commandsshow health spine inventory module fabricport

show health spine inventory powersupplyshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> inventory powersupply <psuSlot>


Syntax:

Leaf id<leafId>



Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> inventorypowersupply <psuSlot>


S Commandsshow health spine inventory powersupply

show health spine inventory supervisorshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> inventory supervisor <supMod>


Syntax:

Leaf id<leafId>



Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> inventorysupervisor <supMod>


S Commandsshow health spine inventory supervisor

show health spine inventory systemshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> inventory system <sysMod>


Syntax:

Leaf id<leafId>



Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> inventory system<sysMod>


S Commandsshow health spine inventory system

show health spine protocolshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> protocol <protName>


Syntax:

Leaf id<leafId>



Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> protocol <protName>


S Commandsshow health spine protocol

show health spine vrfshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> vrf <vrfPort>


Syntax:

Leaf id<leafId>



Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> vrf <vrfPort>


S Commandsshow health spine vrf

show health tenantshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD


Syntax:



Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD


S Commandsshow health tenant

show health tenant applicationshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD application WORD


Syntax:




Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD application WORD


S Commandsshow health tenant application

show health tenant application epgshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD application WORD epg WORD


Syntax:





Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD application WORDepg WORD


S Commandsshow health tenant application epg

show health tenant bridge-domainshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD bridge-domain WORD


Syntax:




Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD bridge-domain WORD


S Commandsshow health tenant bridge-domain

show health tenant bridge-domain detailshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD bridge-domain WORD detail


Syntax:




Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD bridge-domain WORDdetail


S Commandsshow health tenant bridge-domain detail

show health tenant interface bridge-domainshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD interface bridge-domain WORD


Syntax:




Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD interfacebridge-domain WORD


S Commandsshow health tenant interface bridge-domain

show health tenant interface bridge-domain detailshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD interface bridge-domain WORD detail


Syntax:




Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD interfacebridge-domain WORD detail


S Commandsshow health tenant interface bridge-domain detail

show health tenant multicast-route-mapsshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD multicast-route-maps


Syntax:



Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD multicast-route-maps


S Commandsshow health tenant multicast-route-maps

show health tenant vrfshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD


Syntax:




Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD


S Commandsshow health tenant vrf

show health tenant vrf acllog l2show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD acllog <permitDrop> l2 flow vlan <NUMBER>srcintf <srcintf>


Syntax:




flowi statsflow

vlan infovlan



<srcintf><srcintf>


Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD acllog<permitDrop> l2 flow vlan <NUMBER> srcintf <srcintf>


S Commandsshow health tenant vrf acllog l2

show health tenant vrf acllog l3show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD acllog <permitDrop> l3 flow srcip <A.B.C.Dor A:B::C:D> dstip <A.B.C.D or A:B::C:D> proto <proto> srcport <srcport> dstport <dstport> srcintf <srcintf>


Syntax:




flow statsflow

source ipsrcip


destination ipdstip


protocolproto

<proto><proto>

source portsrcport

<srcport><srcport>


<dstport><dstport>


<srcintf><srcintf>


Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD acllog<permitDrop> l3 flow srcip <A.B.C.D or A:B::C:D> dstip <A.B.C.D or A:B::C:D> proto <proto>



srcport <srcport> dstport <dstport> srcintf <srcintf>



show health tenant vrf detailshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD detail


Syntax:




Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD detail


S Commandsshow health tenant vrf detail

show health tenant vrf external-l3 bgpshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 bgp


Syntax:




Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3bgp


S Commandsshow health tenant vrf external-l3 bgp

show health tenant vrf external-l3 bgp nodeshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 bgp node <101-4000>


Syntax:





Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3bgp node <101-4000>


S Commandsshow health tenant vrf external-l3 bgp node

show health tenant vrf external-l3 eigrpshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 eigrp


Syntax:




Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3eigrp


S Commandsshow health tenant vrf external-l3 eigrp

show health tenant vrf external-l3 eigrp detailshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 eigrp detail


Syntax:




Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3eigrp detail


S Commandsshow health tenant vrf external-l3 eigrp detail

show health tenant vrf external-l3 epgshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 epg <epgName>


Syntax:





Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3epg <epgName>


S Commandsshow health tenant vrf external-l3 epg

show health tenant vrf external-l3 epg detailshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 epg <epgName> detail


Syntax:





Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3epg <epgName> detail


S Commandsshow health tenant vrf external-l3 epg detail

show health tenant vrf external-l3 epg nameshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 epg <epgName> name<epgName>


Syntax:






Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3epg <epgName> name <epgName>


S Commandsshow health tenant vrf external-l3 epg name

show health tenant vrf external-l3 epg name detailshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 epg <epgName> name<epgName> detail


Syntax:






Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3epg <epgName> name <epgName> detail


S Commandsshow health tenant vrf external-l3 epg name detail

show health tenant vrf external-l3 interfacesshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 interfaces


Syntax:




Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3interfaces


S Commandsshow health tenant vrf external-l3 interfaces

show health tenant vrf external-l3 interfaces detailshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 interfaces detail


Syntax:




Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3interfaces detail


S Commandsshow health tenant vrf external-l3 interfaces detail

show health tenant vrf external-l3 ospfshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 ospf


Syntax:




Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3ospf


S Commandsshow health tenant vrf external-l3 ospf

show health tenant vrf external-l3 ospf detailshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 ospf detail


Syntax:




Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3ospf detail


S Commandsshow health tenant vrf external-l3 ospf detail

show health tenant vrf external-l3 static-routeshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 static-route


Syntax:




Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3static-route


S Commandsshow health tenant vrf external-l3 static-route

show health tenant vrf external-l3 static-route detailshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 static-route detail


Syntax:




Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3static-route detail


S Commandsshow health tenant vrf external-l3 static-route detail

show health tenant vrf external-l3 static-route nodeshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 static-route node


Syntax:





Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3static-route node


S Commandsshow health tenant vrf external-l3 static-route node

show health tenant vrf external-l3 static-route node detailshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 static-route node detail


Syntax:





Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3static-route node detail


S Commandsshow health tenant vrf external-l3 static-route node detail

show health tenant vrf multicastshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD multicast


Syntax:




Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD multicast


S Commandsshow health tenant vrf multicast

show inband-mgmtshow inband-mgmt

Description: Show inband mgmt epgs on all the nodes


Command Path:

# show inband-mgmt


S Commandsshow inband-mgmt

show inband-mgmt controllershow inband-mgmt controller <controller-id> [epg <WORD>]

Description: show inband mgmt epgs on the controller

Syntax:

<controller-id>

(Optional) Epg Name of conusmer epgWORD


Command Path:

# show inband-mgmt controller <controller-id> [epg <WORD>]


S Commandsshow inband-mgmt controller

show inband-mgmt switchshow inband-mgmt switch <switch-id> [epg <WORD>]

Description: Show inband mgmt epgs on the node

Syntax:

<switch-id>

(Optional) Epg NameWORD


Command Path:

# show inband-mgmt switch <switch-id> [epg <WORD>]


S Commandsshow inband-mgmt switch

show interface bridge-domainshow interface bridge-domain WORD


Syntax:



Command Path:

# show interface bridge-domain WORD


S Commandsshow interface bridge-domain

show interface bridge-domain detailshow interface bridge-domain WORD detail


Syntax:



Command Path:

# show interface bridge-domain WORD detail


S Commandsshow interface bridge-domain detail

show ip interface bridge-domainshow ip interface bridge-domain WORD


Syntax:



Command Path:

# show ip interface bridge-domain WORD


S Commandsshow ip interface bridge-domain

show ipv6 interface bridge-domainshow ipv6 interface bridge-domain WORD


Syntax:



Command Path:

# show ipv6 interface bridge-domain WORD


S Commandsshow ipv6 interface bridge-domain

show l4l7-clustershow l4l7-cluster [tenant <Tenant Name>] [cluster <Device Cluster Name>]

Description: Show L4 L7 Device information

Syntax:

(Optional) Name of TenantTenant Name

(Optional) Name of DeviceDevice Cluster Name


Command Path:

# show l4l7-cluster [tenant <Tenant Name>] [cluster <Device Cluster Name>]


S Commandsshow l4l7-cluster

show l4l7-graphshow l4l7-graph [tenant <Tenant Name>] [graph <Graph Name>]

Description: Show L4 L7 Graph information

Syntax:

(Optional) Name of Tenant<Tenant Name>

(Optional) Name of Graph<Graph Name>


Command Path:

# show l4l7-graph [tenant <Tenant Name>] [graph <Graph Name>]


S Commandsshow l4l7-graph

show l4l7-packageshow l4l7-package

Description: Show L4-L7 package information


Command Path:

# show l4l7-package


S Commandsshow l4l7-package

show ldap-servershow ldap-server

Description: Show LDAP server information


Command Path:

# show ldap-server


S Commandsshow ldap-server

show locator-ledshow locator-led status

Description: Show command for locator-led

Syntax:

locator-led statusstatus


Command Path:

# show locator-led status


S Commandsshow locator-led

show locator-led status leafshow locator-led status leaf

Description: Leaf to filter on

Syntax:

locator-led statusstatus



Command Path:

# show locator-led status leaf


S Commandsshow locator-led status leaf

show microsoft domainshow microsoft domain

Description: Show Microsoft domain information


Command Path:

# show microsoft domain


S Commandsshow microsoft domain

show microsoft domain nameshow microsoft domain name <WORD>

Description:Microsoft domain name

Syntax:



Command Path:

# show microsoft domain name <WORD>


S Commandsshow microsoft domain name

show microsoft domain name hypervshow microsoft domain name <WORD> hyperv <WORD>

Description: Show Microsoft Hypervisor information

Syntax:


HyperV hostnameWORD


Command Path:

# show microsoft domain name <WORD> hyperv <WORD>


S Commandsshow microsoft domain name hyperv

show microsoft domain name port-groupshow microsoft domain name <WORD> port-group

Description: Show Microsoft port group information

Syntax:



Command Path:

# show microsoft domain name <WORD> port-group


S Commandsshow microsoft domain name port-group

show microsoft domain name scvmmshow microsoft domain name <WORD> scvmm <hostname|ip>

Description: Show Microsoft SCVMM information

Syntax:


SCVMM hostname or IP<hostname|ip>


Command Path:

# show microsoft domain name <WORD> scvmm <hostname|ip>


S Commandsshow microsoft domain name scvmm

show microsoft domain name vmshow microsoft domain name <WORD> vm


Syntax:



Command Path:

# show microsoft domain name <WORD> vm


S Commandsshow microsoft domain name vm

show microsoft domain name vm nameshow microsoft domain name <WORD> vm name <WORD>

Description: Show detailed Microsoft VM information

Syntax:


VM NameWORD


Command Path:

# show microsoft domain name <WORD> vm name <WORD>


S Commandsshow microsoft domain name vm name

show microsoft vmshow microsoft vm [name <WORD>] [ip <A.B.C.D>] [mac <AA:BB:CC:DD:EE:FF>]


Syntax:

(Optional) Specify a VM nameWORD

(Optional) Specify a VM IP addressA.B.C.D

(Optional) Specify a VM MAC addressAA:BB:CC:DD:EE:FF


Command Path:

# show microsoft vm [name <WORD>] [ip <A.B.C.D>] [mac <AA:BB:CC:DD:EE:FF>]


S Commandsshow microsoft vm

show monitor accessshow monitor access session session_name

Description: Show monitor session for access interfaces

Syntax:

sessionsession

session namesession_name


Command Path:

# show monitor access session session_name


S Commandsshow monitor access

show monitor fabricshow monitor fabric session session_name

Description: Show monitor session for fabric interfaces

Syntax:

sessionsession



Command Path:

# show monitor fabric session session_name


S Commandsshow monitor fabric

show monitor tenantshow monitor tenant <tenant_name> session session_name

Description: Show monitor session for tenant

Syntax:

tenanttenant_name

sessionsession



Command Path:

# show monitor tenant <tenant_name> session session_name


S Commandsshow monitor tenant

show monitor virtualshow monitor virtual session WORD

Description: Show monitor session for virtual switches

Syntax:

sessionsession

Session nameWORD


Command Path:

# show monitor virtual session WORD


S Commandsshow monitor virtual

show name-alias tenantshow name-alias tenant WORD

Description: Show corresponding tenants for Alias

Syntax:

Name of the tenant Alias to filter on (Max Size 63)WORD


Command Path:

# show name-alias tenant WORD


S Commandsshow name-alias tenant

show name-alias tenant aclshow name-alias tenant WORD acl WORD

Description: Show Acl Name for alias

Syntax:


Name of the Acl Alias to filter on (Max Size 64)WORD


Command Path:

# show name-alias tenant WORD acl WORD


S Commandsshow name-alias tenant acl

show name-alias tenant applicationshow name-alias tenant WORD application WORD

Description: Show Application Name for alias

Syntax:


Name of the application Alias to filter on (Max Size 64)WORD


Command Path:

# show name-alias tenant WORD application WORD


S Commandsshow name-alias tenant application

show name-alias tenant application epgshow name-alias tenant WORD application WORD epg WORD

Description: Show EndPoint Group Name for alias

Syntax:


Name of the application Alias to filter on (Max Size 64)WORD

Name of the epg Alias to filter on (Max Size 64)WORD


Command Path:

# show name-alias tenant WORD application WORD epg WORD


S Commandsshow name-alias tenant application epg

show name-alias tenant bridge-domainshow name-alias tenant WORD bridge-domain WORD

Description: Show Bridge-Domain Name for alias

Syntax:


Name of the bridge-domain Alias to filter on (Max Size 63)WORD


Command Path:

# show name-alias tenant WORD bridge-domain WORD


S Commandsshow name-alias tenant bridge-domain

show name-alias tenant contractshow name-alias tenant WORD contract WORD

Description: Show Contract Name for alias

Syntax:


Name of the contract Alias to filter on (Max Size 64)WORD


Command Path:

# show name-alias tenant WORD contract WORD


S Commandsshow name-alias tenant contract

show name-alias tenant contract subjectshow name-alias tenant WORD contract WORD subject WORD

Description: Show Subject Name for alias

Syntax:


Name of the contract Alias to filter on (Max Size 64)WORD

Name of the Subject Alias to filter on (Max Size 64)WORD


Command Path:

# show name-alias tenant WORD contract WORD subject WORD


S Commandsshow name-alias tenant contract subject

show name-alias tenant l3outshow name-alias tenant WORD l3out WORD

Description: Show L3out Name for alias

Syntax:


Name of the L3out Alias to filter on (Max Size 64)WORD


Command Path:

# show name-alias tenant WORD l3out WORD


S Commandsshow name-alias tenant l3out

show name-alias tenant vrfshow name-alias tenant WORD vrf WORD

Description: Show Vrf Name for alias

Syntax:


Name of the vrf Alias to filter on (Max Size 63)WORD


Command Path:

# show name-alias tenant WORD vrf WORD


S Commandsshow name-alias tenant vrf

show ntpqshow ntpq

Description: Show ntpq information


Command Path:

# show ntpq


S Commandsshow ntpq

show oob-mgmtshow oob-mgmt

Description: Show Out of band Information


Command Path:

# show oob-mgmt


S Commandsshow oob-mgmt

show oob-mgmt controllershow oob-mgmt controller <controller-id> [epg <WORD>]

Description: Show oob mgmt epgs on the controller, enter one

Syntax:

<controller-id>



Command Path:

# show oob-mgmt controller <controller-id> [epg <WORD>]


S Commandsshow oob-mgmt controller

show oob-mgmt switchshow oob-mgmt switch <switch-id> [epg <WORD>]

Description: Show oob mgmt epgs on the node, enter one

Syntax:

<switch-id>



Command Path:

# show oob-mgmt switch <switch-id> [epg <WORD>]


S Commandsshow oob-mgmt switch

show policy-mapshow policy-map

Description: Show policy maps


Command Path:

# show policy-map


S Commandsshow policy-map

show policy-map type data-planeshow policy-map type data-plane infra WORD

Description: Data-plane type policy-map(s)

Syntax:

Global data-plane policy-map(s)infra

data-plane type policy-map(s) (Max Size 64)WORD


Command Path:

# show policy-map type data-plane infra WORD


S Commandsshow policy-map type data-plane

show policy-map type qosshow policy-map type qos WORD

Description: QOS type policy-map(s)

Syntax:

QOS type policy-map(s) (Max Size 64)WORD


Command Path:

# show policy-map type qos WORD


S Commandsshow policy-map type qos

show port-channel leafshow port-channel leaf WORD <port-channel-list>

Description: Show leaf port-channel info

Syntax:

Leaf Range or Leaf Name ListWORD

port channel names<port-channel-list>


Command Path:

# show port-channel leaf WORD <port-channel-list>


S Commandsshow port-channel leaf

show port-channel mapshow port-channel map <port-channel-list>

Description: Show port-channel mapping

Syntax:



Command Path:

# show port-channel map <port-channel-list>


S Commandsshow port-channel map

show port-channel map leafshow port-channel map <port-channel-list> leaf WORD [fex <101-164>]

Description: Leaf

Syntax:



(Optional) Fex ID<101-164>


Command Path:

# show port-channel map <port-channel-list> leaf WORD [fex <101-164>]


S Commandsshow port-channel map leaf

show radius-servershow radius-server

Description: Show RADIUS server information


Command Path:

# show radius-server


S Commandsshow radius-server

show resourceshow resource conflict encap-vlan

Description: Show resource information

Syntax:

show resource conflicts in APICconflict

show resource conflicts of encap-vlan in APICencap-vlan


Command Path:

# show resource conflict encap-vlan


S Commandsshow resource

show resource conflict encap-vlan epgshow resource conflict encap-vlan epg <WORD>

Description: Epg Name

Syntax:



Epg NameWORD


Command Path:

# show resource conflict encap-vlan epg <WORD>


S Commandsshow resource conflict encap-vlan epg

show resource conflict encap-vlan epg nodeshow resource conflict encap-vlan epg <WORD> node <101-4000>

Description: Node ID

Syntax:



Epg NameWORD

Leaf ID<101-4000>


Command Path:

# show resource conflict encap-vlan epg <WORD> node <101-4000>


S Commandsshow resource conflict encap-vlan epg node

show roleshow role

Description: Show information about AAA Roles


Command Path:

# show role


S Commandsshow role

show running-configshow running-config [all] <scope>

Description: Show running configuration

Syntax:

(Optional) Show running-config with defaultsall



Command Path:

# show running-config [all] <scope>


S Commandsshow running-config

show sessionsshow sessions [id <log-id>] [action action<action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] <scope>

Description: Show session-log information

Syntax:

(Optional) Log ID<log-id>

(Optional) Object action indicatoraction<action-type>

(Optional) Name of user<user-name>

(Optional) Logs created in time interval. Number range from=1 to=59<num-minutes>

(Optional) Logs created in time interval. Number range from=1 to=23<num-hours>

(Optional) Logs created in time interval. Number range from=1 to=999<num-days>

(Optional) Logs created in time interval<YYYY-MM-DDTHR:MIN:SEC>

(Optional) Logs created in time intervalend-time<YYYY-MM-DDTHR:MIN:SEC>

(Optional) Detailed session-log information. Displays the action triggerthat shows why a login occurred.

detail



Command Path:

# show sessions [id <log-id>] [action action<action-type>] [user <user-name>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] <scope>


S Commandsshow sessions

show sessions controllershow sessions [id <log-id>] [action <action-type>] [user <user-name>] [last-hours <NUMBER>] [last-days<NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail]controller



Command Path:

# show sessions [id <log-id>] [action <action-type>] [user <user-name>] [last-hours <NUMBER>][last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>][detail] controller


S Commandsshow sessions controller

show sessions controller detailshow sessions [id <log-id>] [action <action-type>] [user <user-name>] [last-hours <NUMBER>] [last-days<NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail]controller detail [id <node-id>]


Syntax:



Command Path:

# show sessions [id <log-id>] [action <action-type>] [user <user-name>] [last-hours <NUMBER>][last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>][detail] controller detail [id <node-id>]


S Commandsshow sessions controller detail

show sessions leafshow sessions [id <log-id>] [action <action-type>] [user <user-name>] [last-hours <NUMBER>] [last-days<NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail]leaf <leafId>


Syntax:

Leaf id<leafId>


Command Path:

# show sessions [id <log-id>] [action <action-type>] [user <user-name>] [last-hours <NUMBER>][last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>][detail] leaf <leafId>


S Commandsshow sessions leaf

show sessions spineshow sessions [id <log-id>] [action <action-type>] [user <user-name>] [last-hours <NUMBER>] [last-days<NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail]spine <leafId>


Syntax:

Leaf id<leafId>


Command Path:

# show sessions [id <log-id>] [action <action-type>] [user <user-name>] [last-hours <NUMBER>][last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>][detail] spine <leafId>


S Commandsshow sessions spine

show snapshot activeshow snapshot active job

Description: Show command for active snapshot job

Syntax:

View active snapshot jobjob


Command Path:

# show snapshot active job


S Commandsshow snapshot active

show snapshot filesshow snapshot files

Description: Show command for snapshot files


Command Path:

# show snapshot files


S Commandsshow snapshot files

show snapshot jobsshow snapshot jobs

Description: Show command for snapshot jobs


Command Path:

# show snapshot jobs


S Commandsshow snapshot jobs

show snmpshow snmp [policy <policy>]

Description: Show snmp policy information

Syntax:

(Optional) SNMP policy namepolicy


Command Path:

# show snmp [policy <policy>]


S Commandsshow snmp

show snmp clientgroupsshow snmp [policy <policy>] clientgroups

Description: Show snmp client group policies

Syntax:



Command Path:

# show snmp [policy <policy>] clientgroups


S Commandsshow snmp clientgroups

show snmp communityshow snmp [policy <policy>] community

Description: Show snmp community information

Syntax:



Command Path:

# show snmp [policy <policy>] community


S Commandsshow snmp community

show snmp engineidshow snmp [policy <policy>] engineid

Description: Show snmp v3 engine-id

Syntax:



Command Path:

# show snmp [policy <policy>] engineid


S Commandsshow snmp engineid

show snmp hostsshow snmp [policy <policy>] hosts

Description: Show snmp trap hosts

Syntax:



Command Path:

# show snmp [policy <policy>] hosts


S Commandsshow snmp hosts

show snmp summaryshow snmp [policy <policy>] summary

Description: Show snmp summary

Syntax:



Command Path:

# show snmp [policy <policy>] summary


S Commandsshow snmp summary

show snmp usersshow snmp [policy <policy>] users

Description: Show snmp v3 users

Syntax:



Command Path:

# show snmp [policy <policy>] users


S Commandsshow snmp users

show statsshow stats granularity <granularity-value> [history] [cumulative] tenant|leaf|spine

Description: Show statistics

Syntax:

Choose granularity valuegranularity

<granularity-value><granularity-value>

(Optional) historical stats informationhistory

(Optional) cumulative stats informationcumulative

command scopetenant

command scopeleaf

command scopespine


Command Path:

# show stats granularity <granularity-value> [history] [cumulative] tenant|leaf|spine


S Commandsshow stats

show stats granularity communication controllershow stats granularity <granularity-value> [history] [cumulative] communication controller node-id

Description: Show command for nginx web-requests

Syntax:

node-idnode-id


Command Path:

# show stats granularity <granularity-value> [history] [cumulative] communication controllernode-id


S Commandsshow stats granularity communication controller

show stats granularity leafshow stats granularity <granularity-value> [history] [cumulative] leaf <leafId>


Syntax:

Leaf id<leafId>


Command Path:

# show stats granularity <granularity-value> [history] [cumulative] leaf <leafId>


S Commandsshow stats granularity leaf

show stats granularity leaf fexshow stats granularity <granularity-value> [history] [cumulative] leaf <leafId> fex <fexNum>


Syntax:

Leaf id<leafId>



Command Path:

# show stats granularity <granularity-value> [history] [cumulative] leaf <leafId> fex<fexNum>


S Commandsshow stats granularity leaf fex

show stats granularity leaf fex moduleshow stats granularity <granularity-value> [history] [cumulative] leaf <leafId> fex <fexNum> module <lcSlot>


Syntax:

Leaf id<leafId>




Command Path:

# show stats granularity <granularity-value> [history] [cumulative] leaf <leafId> fex<fexNum> module <lcSlot>


S Commandsshow stats granularity leaf fex module

show stats granularity leaf interface ethernetshow stats granularity <granularity-value> [history] [cumulative] leaf <leafId> interface ethernet <phyInt>


Syntax:

Leaf id<leafId>



Command Path:

# show stats granularity <granularity-value> [history] [cumulative] leaf <leafId> interfaceethernet <phyInt>


S Commandsshow stats granularity leaf interface ethernet

show stats granularity leaf interface mgmtshow stats granularity <granularity-value> [history] [cumulative] leaf <leafId> interface mgmt <mgmtPort>


Syntax:

Leaf id<leafId>



Command Path:

# show stats granularity <granularity-value> [history] [cumulative] leaf <leafId> interfacemgmt <mgmtPort>


S Commandsshow stats granularity leaf interface mgmt

show stats granularity leaf interface portchannelshow stats granularity <granularity-value> [history] [cumulative] leaf <leafId> interface portchannel <portChan>


Syntax:

Leaf id<leafId>



Command Path:

# show stats granularity <granularity-value> [history] [cumulative] leaf <leafId> interfaceportchannel <portChan>


S Commandsshow stats granularity leaf interface portchannel

show stats granularity leaf inventory chassisshow stats granularity <granularity-value> [history] [cumulative] leaf <leafId> inventory chassis


Syntax:

Leaf id<leafId>


Command Path:

# show stats granularity <granularity-value> [history] [cumulative] leaf <leafId> inventorychassis


S Commandsshow stats granularity leaf inventory chassis

show stats granularity leaf inventory fansshow stats granularity <granularity-value> [history] [cumulative] leaf <leafId> inventory fans <ftSlot>


Syntax:

Leaf id<leafId>



Command Path:

# show stats granularity <granularity-value> [history] [cumulative] leaf <leafId> inventoryfans <ftSlot>


S Commandsshow stats granularity leaf inventory fans

show stats granularity leaf inventory powersupplyshow stats granularity <granularity-value> [history] [cumulative] leaf <leafId> inventory powersupply <psuSlot>


Syntax:

Leaf id<leafId>



Command Path:

# show stats granularity <granularity-value> [history] [cumulative] leaf <leafId> inventorypowersupply <psuSlot>


S Commandsshow stats granularity leaf inventory powersupply

show stats granularity leaf inventory supervisorshow stats granularity <granularity-value> [history] [cumulative] leaf <leafId> inventory supervisor <supMod>


Syntax:

Leaf id<leafId>



Command Path:

# show stats granularity <granularity-value> [history] [cumulative] leaf <leafId> inventorysupervisor <supMod>


S Commandsshow stats granularity leaf inventory supervisor

show stats granularity spineshow stats granularity <granularity-value> [history] [cumulative] spine <leafId>


Syntax:

Leaf id<leafId>


Command Path:

# show stats granularity <granularity-value> [history] [cumulative] spine <leafId>


S Commandsshow stats granularity spine

show stats granularity spine interface ethernetshow stats granularity <granularity-value> [history] [cumulative] spine <leafId> interface ethernet <phyInt>


Syntax:

Leaf id<leafId>



Command Path:

# show stats granularity <granularity-value> [history] [cumulative] spine <leafId> interfaceethernet <phyInt>


S Commandsshow stats granularity spine interface ethernet

show stats granularity spine interface mgmtshow stats granularity <granularity-value> [history] [cumulative] spine <leafId> interface mgmt <mgmtPort>


Syntax:

Leaf id<leafId>



Command Path:

# show stats granularity <granularity-value> [history] [cumulative] spine <leafId> interfacemgmt <mgmtPort>


S Commandsshow stats granularity spine interface mgmt

show stats granularity spine inventory chassisshow stats granularity <granularity-value> [history] [cumulative] spine <leafId> inventory chassis


Syntax:

Leaf id<leafId>


Command Path:

# show stats granularity <granularity-value> [history] [cumulative] spine <leafId> inventorychassis


S Commandsshow stats granularity spine inventory chassis

show stats granularity spine inventory fabricshow stats granularity <granularity-value> [history] [cumulative] spine <leafId> inventory fabric <fcMod>


Syntax:

Leaf id<leafId>



Command Path:

# show stats granularity <granularity-value> [history] [cumulative] spine <leafId> inventoryfabric <fcMod>


S Commandsshow stats granularity spine inventory fabric

show stats granularity spine inventory fansshow stats granularity <granularity-value> [history] [cumulative] spine <leafId> inventory fans <ftSlot>


Syntax:

Leaf id<leafId>



Command Path:

# show stats granularity <granularity-value> [history] [cumulative] spine <leafId> inventoryfans <ftSlot>


S Commandsshow stats granularity spine inventory fans

show stats granularity spine inventory moduleshow stats granularity <granularity-value> [history] [cumulative] spine <leafId> inventory module <lcSlot>


Syntax:

Leaf id<leafId>



Command Path:

# show stats granularity <granularity-value> [history] [cumulative] spine <leafId> inventorymodule <lcSlot>


S Commandsshow stats granularity spine inventory module

show stats granularity spine inventory powersupplyshow stats granularity <granularity-value> [history] [cumulative] spine <leafId> inventory powersupply<psuSlot>


Syntax:

Leaf id<leafId>



Command Path:

# show stats granularity <granularity-value> [history] [cumulative] spine <leafId> inventorypowersupply <psuSlot>


S Commandsshow stats granularity spine inventory powersupply

show stats granularity spine inventory supervisorshow stats granularity <granularity-value> [history] [cumulative] spine <leafId> inventory supervisor <supMod>


Syntax:

Leaf id<leafId>



Command Path:

# show stats granularity <granularity-value> [history] [cumulative] spine <leafId> inventorysupervisor <supMod>


S Commandsshow stats granularity spine inventory supervisor

show stats granularity spine inventory systemshow stats granularity <granularity-value> [history] [cumulative] spine <leafId> inventory system <sysMod>


Syntax:

Leaf id<leafId>



Command Path:

# show stats granularity <granularity-value> [history] [cumulative] spine <leafId> inventorysystem <sysMod>


S Commandsshow stats granularity spine inventory system

show stats granularity tenantshow stats granularity <granularity-value> [history] [cumulative] tenant WORD


Syntax:



Command Path:

# show stats granularity <granularity-value> [history] [cumulative] tenant WORD


S Commandsshow stats granularity tenant

show stats granularity tenant applicationshow stats granularity <granularity-value> [history] [cumulative] tenant WORD application WORD


Syntax:




Command Path:

# show stats granularity <granularity-value> [history] [cumulative] tenant WORD applicationWORD


S Commandsshow stats granularity tenant application

show stats granularity tenant application epgshow stats granularity <granularity-value> [history] [cumulative] tenant WORD application WORD epg WORD


Syntax:





Command Path:

# show stats granularity <granularity-value> [history] [cumulative] tenant WORD applicationWORD epg WORD


S Commandsshow stats granularity tenant application epg

show stats granularity tenant dot1q-tunnelshow stats granularity <granularity-value> [history] [cumulative] tenant WORD dot1q-tunnel WORD


Syntax:


Name of the TnlEPG to filter on (Max Size 64)WORD


Command Path:

# show stats granularity <granularity-value> [history] [cumulative] tenant WORD dot1q-tunnelWORD


S Commandsshow stats granularity tenant dot1q-tunnel

show stats granularity tenant multicast-route-mapsshow stats granularity <granularity-value> [history] [cumulative] tenant WORD multicast-route-maps


Syntax:



Command Path:

# show stats granularity <granularity-value> [history] [cumulative] tenant WORDmulticast-route-maps


S Commandsshow stats granularity tenant multicast-route-maps

show stats granularity tenant vrfshow stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORD


Syntax:




Command Path:

# show stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORD


S Commandsshow stats granularity tenant vrf

show stats granularity tenant vrf acllog l2show stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORD acllog <permitDrop>l2 flow vlan <NUMBER> srcintf <srcintf>


Syntax:




flowi statsflow

vlan infovlan



<srcintf><srcintf>


Command Path:

# show stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORDacllog <permitDrop> l2 flow vlan <NUMBER> srcintf <srcintf>


S Commandsshow stats granularity tenant vrf acllog l2

show stats granularity tenant vrf acllog l3show stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORD acllog <permitDrop>l3 flow srcip <A.B.C.D or A:B::C:D> dstip <A.B.C.D or A:B::C:D> proto <proto> srcport <srcport> dstport <dstport>srcintf <srcintf>


Syntax:




flow statsflow

source ipsrcip


destination ipdstip


protocolproto

<proto><proto>

source portsrcport

<srcport><srcport>


<dstport><dstport>


<srcintf><srcintf>


Command Path:

# show stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORDacllog <permitDrop> l3 flow srcip <A.B.C.D or A:B::C:D> dstip <A.B.C.D or A:B::C:D> proto<proto> srcport <srcport> dstport <dstport> srcintf <srcintf>


S Commandsshow stats granularity tenant vrf acllog l3

show stats granularity tenant vrf detailshow stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORD detail


Syntax:




Command Path:

# show stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORDdetail


S Commandsshow stats granularity tenant vrf detail

show stats granularity tenant vrf external-l3 bgpshow stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORD external-l3 bgp


Syntax:




Command Path:

# show stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORDexternal-l3 bgp


S Commandsshow stats granularity tenant vrf external-l3 bgp

show stats granularity tenant vrf external-l3 bgp nodeshow stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORD external-l3 bgpnode <101-4000>


Syntax:





Command Path:

# show stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORDexternal-l3 bgp node <101-4000>


S Commandsshow stats granularity tenant vrf external-l3 bgp node

show stats granularity tenant vrf external-l3 eigrpshow stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORD external-l3 eigrp


Syntax:




Command Path:

# show stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORDexternal-l3 eigrp


S Commandsshow stats granularity tenant vrf external-l3 eigrp

show stats granularity tenant vrf external-l3 eigrp detailshow stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORD external-l3 eigrpdetail


Syntax:




Command Path:

# show stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORDexternal-l3 eigrp detail


S Commandsshow stats granularity tenant vrf external-l3 eigrp detail

show stats granularity tenant vrf external-l3 epgshow stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORD external-l3 epg<epgName>


Syntax:





Command Path:

# show stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORDexternal-l3 epg <epgName>


S Commandsshow stats granularity tenant vrf external-l3 epg

show stats granularity tenant vrf external-l3 epg detailshow stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORD external-l3 epg<epgName> detail


Syntax:





Command Path:

# show stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORDexternal-l3 epg <epgName> detail


S Commandsshow stats granularity tenant vrf external-l3 epg detail

show stats granularity tenant vrf external-l3 epg nameshow stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORD external-l3 epg<epgName> name <epgName>


Syntax:






Command Path:

# show stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORDexternal-l3 epg <epgName> name <epgName>


S Commandsshow stats granularity tenant vrf external-l3 epg name

show stats granularity tenant vrf external-l3 epg name detailshow stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORD external-l3 epg<epgName> name <epgName> detail


Syntax:






Command Path:

# show stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORDexternal-l3 epg <epgName> name <epgName> detail


S Commandsshow stats granularity tenant vrf external-l3 epg name detail

show stats granularity tenant vrf external-l3 interfacesshow stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORD external-l3 interfaces


Syntax:




Command Path:

# show stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORDexternal-l3 interfaces


S Commandsshow stats granularity tenant vrf external-l3 interfaces

show stats granularity tenant vrf external-l3 interfaces detailshow stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORD external-l3 interfacesdetail


Syntax:




Command Path:

# show stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORDexternal-l3 interfaces detail


S Commandsshow stats granularity tenant vrf external-l3 interfaces detail

show stats granularity tenant vrf external-l3 ospfshow stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORD external-l3 ospf


Syntax:




Command Path:

# show stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORDexternal-l3 ospf


S Commandsshow stats granularity tenant vrf external-l3 ospf

show stats granularity tenant vrf external-l3 ospf detailshow stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORD external-l3 ospfdetail


Syntax:




Command Path:

# show stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORDexternal-l3 ospf detail


S Commandsshow stats granularity tenant vrf external-l3 ospf detail

show stats granularity tenant vrf external-l3 static-routeshow stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORD external-l3static-route


Syntax:




Command Path:

# show stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORDexternal-l3 static-route


S Commandsshow stats granularity tenant vrf external-l3 static-route

show stats granularity tenant vrf external-l3 static-route detailshow stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORD external-l3static-route detail


Syntax:




Command Path:

# show stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORDexternal-l3 static-route detail


S Commandsshow stats granularity tenant vrf external-l3 static-route detail

show stats granularity tenant vrf external-l3 static-route nodeshow stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORD external-l3static-route node


Syntax:





Command Path:

# show stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORDexternal-l3 static-route node


S Commandsshow stats granularity tenant vrf external-l3 static-route node

show stats granularity tenant vrf external-l3 static-route nodedetail

show stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORD external-l3static-route node detail


Syntax:





Command Path:

# show stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORDexternal-l3 static-route node detail


S Commandsshow stats granularity tenant vrf external-l3 static-route node detail

show stats granularity tenant vrf multicastshow stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORD multicast


Syntax:




Command Path:

# show stats granularity <granularity-value> [history] [cumulative] tenant WORD vrf WORDmulticast


S Commandsshow stats granularity tenant vrf multicast

show switchshow switch

Description: Show switch information


Command Path:

# show switch


S Commandsshow switch

show switch detailshow switch detail [id <switch-id>]

Description: Show switch detailed information

Syntax:

(Optional) Optional switch id. Number range from=0to=9223372036854775807

switch-id


Command Path:

# show switch detail [id <switch-id>]


S Commandsshow switch detail

show tacacs-servershow tacacs-server

Description: Show tacacs server information


Command Path:

# show tacacs-server


S Commandsshow tacacs-server

show techsupport allshow techsupport all status

Description: Techsupport status for all

Syntax:

Statusstatus


Command Path:

# show techsupport all status


S Commandsshow techsupport all

show techsupport controllersshow techsupport controllers status

Description: Techsupport status for controllers

Syntax:

Statusstatus


Command Path:

# show techsupport controllers status


S Commandsshow techsupport controllers

show techsupport hostshow techsupport host <NUMBER> status

Description: Techsupport status for host

Syntax:

Specify the host Odev ID. Number range from=0to=9223372036854775807

<Odevid>

Statusstatus


Command Path:

# show techsupport host <NUMBER> status


S Commandsshow techsupport host

show techsupport switchshow techsupport switch switchId <switchId> status

Description: Techsupport status for switch

Syntax:

switch id 101-4000 or range(s): 101-103,104switchId <switchId>

Statusstatus


Command Path:

# show techsupport switch switchId <switchId> status


S Commandsshow techsupport switch

show tenantshow tenant WORD


Syntax:



Command Path:

# show tenant WORD


S Commandsshow tenant

show tenant access-listshow tenant WORD access-list WORD

Description: Show Access-list Information

Syntax:




Command Path:

# show tenant WORD access-list WORD


S Commandsshow tenant access-list

show tenant applicationshow tenant WORD application WORD


Syntax:




Command Path:

# show tenant WORD application WORD


S Commandsshow tenant application

show tenant application endpointsshow tenant WORD application WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>]


Syntax:










Command Path:

# show tenant WORD application WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>]


S Commandsshow tenant application endpoints

show tenant application endpoints leaf interface ethernetshow tenant WORD application WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] leaf <WORD> interfaceethernet ethernet [<fex>/]<slot>/<port>


Syntax:










WORD



Command Path:

# show tenant WORD application WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] leaf<WORD> interface ethernet ethernet [<fex>/]<slot>/<port>


S Commandsshow tenant application endpoints leaf interface ethernet

show tenant application endpoints leaf interface port-channelshow tenant WORD application WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] leaf <WORD> interfaceport-channel <WORD> [fex <NUMBER>]


Syntax:










WORD




Command Path:

# show tenant WORD application WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] leaf<WORD> interface port-channel <WORD> [fex <NUMBER>]


S Commandsshow tenant application endpoints leaf interface port-channel

show tenant application endpoints vpcshow tenant WORD application WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] vpc context <WORD><WORD> interface vpc <WORD> [fex <fex>]


Syntax:









VPC Contextcontext


WORD


WORD






Command Path:

# show tenant WORD application WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] vpccontext <WORD> <WORD> interface vpc <WORD> [fex <fex>]


S Commandsshow tenant application endpoints vpc

show tenant application epgshow tenant WORD application WORD epg WORD


Syntax:





Command Path:

# show tenant WORD application WORD epg WORD


S Commandsshow tenant application epg

show tenant application epg detailshow tenant WORD application WORD epg WORD detail


Syntax:





Command Path:

# show tenant WORD application WORD epg WORD detail


S Commandsshow tenant application epg detail

show tenant application epg endpointsshow tenant WORD application WORD epg WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>]


Syntax:











Command Path:

# show tenant WORD application WORD epg WORD endpoints [type <type>] [mac <E.E.EEE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6<A:B::C:D>]


S Commandsshow tenant application epg endpoints

show tenant application epg endpoints leaf interface ethernetshow tenant WORD application WORD epg WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] leaf <WORD> interfaceethernet ethernet [<fex>/]<slot>/<port>


Syntax:











WORD



Command Path:

# show tenant WORD application WORD epg WORD endpoints [type <type>] [mac <E.E.EEE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6<A:B::C:D>] leaf <WORD> interface ethernet ethernet [<fex>/]<slot>/<port>


S Commandsshow tenant application epg endpoints leaf interface ethernet

show tenant application epg endpoints leaf interfaceport-channel

show tenant WORD application WORD epg WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] leaf <WORD> interfaceport-channel <WORD> [fex <NUMBER>]


Syntax:











WORD




Command Path:

# show tenant WORD application WORD epg WORD endpoints [type <type>] [mac <E.E.EEE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6<A:B::C:D>] leaf <WORD> interface port-channel <WORD> [fex <NUMBER>]


S Commandsshow tenant application epg endpoints leaf interface port-channel

show tenant application epg endpoints vpcshow tenant WORD application WORD epg WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] vpc context <WORD><WORD> interface vpc <WORD> [fex <fex>]


Syntax:










VPC Contextcontext


WORD


WORD






Command Path:

# show tenant WORD application WORD epg WORD endpoints [type <type>] [mac <E.E.E


S Commandsshow tenant application epg endpoints vpc

EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6<A:B::C:D>] vpc context <WORD> <WORD> interface vpc <WORD> [fex <fex>]


S Commandsshow tenant application epg endpoints vpc

show tenant bridge-domainshow tenant WORD bridge-domain WORD


Syntax:




Command Path:

# show tenant WORD bridge-domain WORD


S Commandsshow tenant bridge-domain

show tenant bridge-domain detailshow tenant WORD bridge-domain WORD detail


Syntax:




Command Path:

# show tenant WORD bridge-domain WORD detail


S Commandsshow tenant bridge-domain detail

show tenant contract-typeshow tenant WORD contract-type WORD

Description: Show Contracts Information Based on Type

Syntax:


whitelist (permit) or blacklist(deny) or oob-mgmt type of contractWORD


Command Path:

# show tenant WORD contract-type WORD


S Commandsshow tenant contract-type

show tenant contractshow tenant WORD contract WORD

Description: Show Contracts Information

Syntax:




Command Path:

# show tenant WORD contract WORD


S Commandsshow tenant contract

show tenant detailshow tenant WORD detail

Description: Show detailed view of tenant

Syntax:



Command Path:

# show tenant WORD detail


S Commandsshow tenant detail

show tenant dot1q-tunnelshow tenant WORD dot1q-tunnel WORD


Syntax:


Name of the TnlEPG to filter on (Max Size 64)WORD


Command Path:

# show tenant WORD dot1q-tunnel WORD


S Commandsshow tenant dot1q-tunnel

show tenant endpointsshow tenant WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE>] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>]


Syntax:









Command Path:

# show tenant WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>]


S Commandsshow tenant endpoints

show tenant endpoints leaf interface ethernetshow tenant WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE>] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] leaf <WORD> interface ethernet ethernet[<fex>/]<slot>/<port>


Syntax:









WORD



Command Path:

# show tenant WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] leaf <WORD> interfaceethernet ethernet [<fex>/]<slot>/<port>


S Commandsshow tenant endpoints leaf interface ethernet

show tenant endpoints leaf interface port-channelshow tenant WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE>] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] leaf <WORD> interface port-channel <WORD> [fex<NUMBER>]


Syntax:









WORD




Command Path:

# show tenant WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] leaf <WORD> interfaceport-channel <WORD> [fex <NUMBER>]


S Commandsshow tenant endpoints leaf interface port-channel

show tenant endpoints vpcshow tenant WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE>] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] vpc context <WORD> <WORD> interface vpc <WORD>[fex <fex>]


Syntax:








VPC Contextcontext


WORD


WORD






Command Path:

# show tenant WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] vpc context <WORD><WORD> interface vpc <WORD> [fex <fex>]


S Commandsshow tenant endpoints vpc

show tenant epgshow tenant WORD epg WORD


Syntax:




Command Path:

# show tenant WORD epg WORD


S Commandsshow tenant epg

show tenant epg detailshow tenant WORD epg WORD detail


Syntax:




Command Path:

# show tenant WORD epg WORD detail


S Commandsshow tenant epg detail

show tenant external-l2 epgshow tenant WORD external-l2 epg WORD


Syntax:


Name of the EPG to filter on (Max Size 64)WORD


Command Path:

# show tenant WORD external-l2 epg WORD


S Commandsshow tenant external-l2 epg

show tenant interface bridge-domainshow tenant WORD interface bridge-domain WORD


Syntax:




Command Path:

# show tenant WORD interface bridge-domain WORD


S Commandsshow tenant interface bridge-domain

show tenant interface bridge-domain detailshow tenant WORD interface bridge-domain WORD detail


Syntax:




Command Path:

# show tenant WORD interface bridge-domain WORD detail


S Commandsshow tenant interface bridge-domain detail

show tenant ip interface bridge-domainshow tenant WORD ip interface bridge-domain WORD

Description: Show command for IP properties on interface BD

Syntax:




Command Path:

# show tenant WORD ip interface bridge-domain WORD


S Commandsshow tenant ip interface bridge-domain

show tenant ipv6 interface bridge-domainshow tenant WORD ipv6 interface bridge-domain WORD

Description: Show command for IP properties on interface BD

Syntax:




Command Path:

# show tenant WORD ipv6 interface bridge-domain WORD


S Commandsshow tenant ipv6 interface bridge-domain

show tenant multicast-route-mapsshow tenant WORD multicast-route-maps


Syntax:



Command Path:

# show tenant WORD multicast-route-maps


S Commandsshow tenant multicast-route-maps

show tenant policy-mapshow tenant WORD policy-map

Description: Show policy maps

Syntax:



Command Path:

# show tenant WORD policy-map


S Commandsshow tenant policy-map

show tenant policy-map type data-planeshow tenant WORD policy-map type data-plane WORD

Description: Data-plane type policy-map(s)

Syntax:


data-plane type policy-map(s) (Max Size 64)WORD


Command Path:

# show tenant WORD policy-map type data-plane WORD


S Commandsshow tenant policy-map type data-plane

show tenant policy-map type qosshow tenant WORD policy-map type qos WORD

Description: QOS type policy-map(s)

Syntax:


QOS type policy-map(s) (Max Size 64)WORD


Command Path:

# show tenant WORD policy-map type qos WORD


S Commandsshow tenant policy-map type qos

show tenant vrfshow tenant WORD vrf WORD


Syntax:




Command Path:

# show tenant WORD vrf WORD


S Commandsshow tenant vrf

show tenant vrf acllog l2show tenant WORD vrf WORD acllog <permitDrop> l2 flow vlan <NUMBER> srcintf <srcintf>


Syntax:




flowi statsflow

vlan infovlan



<srcintf><srcintf>


Command Path:

# show tenant WORD vrf WORD acllog <permitDrop> l2 flow vlan <NUMBER> srcintf <srcintf>


S Commandsshow tenant vrf acllog l2

show tenant vrf acllog l3show tenant WORD vrf WORD acllog <permitDrop> l3 flow srcip <A.B.C.D or A:B::C:D> dstip <A.B.C.D orA:B::C:D> proto <proto> srcport <srcport> dstport <dstport> srcintf <srcintf>


Syntax:




flow statsflow

source ipsrcip


destination ipdstip


protocolproto

<proto><proto>

source portsrcport

<srcport><srcport>


<dstport><dstport>


<srcintf><srcintf>


Command Path:

# show tenant WORD vrf WORD acllog <permitDrop> l3 flow srcip <A.B.C.D or A:B::C:D> dstip<A.B.C.D or A:B::C:D> proto <proto> srcport <srcport> dstport <dstport> srcintf <srcintf>


S Commandsshow tenant vrf acllog l3

show tenant vrf detailshow tenant WORD vrf WORD detail


Syntax:




Command Path:

# show tenant WORD vrf WORD detail


S Commandsshow tenant vrf detail

show tenant vrf external-l3 bgpshow tenant WORD vrf WORD external-l3 bgp


Syntax:




Command Path:

# show tenant WORD vrf WORD external-l3 bgp


S Commandsshow tenant vrf external-l3 bgp

show tenant vrf external-l3 bgp nodeshow tenant WORD vrf WORD external-l3 bgp node <101-4000>


Syntax:





Command Path:

# show tenant WORD vrf WORD external-l3 bgp node <101-4000>


S Commandsshow tenant vrf external-l3 bgp node

show tenant vrf external-l3 eigrpshow tenant WORD vrf WORD external-l3 eigrp


Syntax:




Command Path:

# show tenant WORD vrf WORD external-l3 eigrp


S Commandsshow tenant vrf external-l3 eigrp

show tenant vrf external-l3 eigrp detailshow tenant WORD vrf WORD external-l3 eigrp detail


Syntax:




Command Path:

# show tenant WORD vrf WORD external-l3 eigrp detail


S Commandsshow tenant vrf external-l3 eigrp detail

show tenant vrf external-l3 epgshow tenant WORD vrf WORD external-l3 epg <epgName>


Syntax:





Command Path:

# show tenant WORD vrf WORD external-l3 epg <epgName>


S Commandsshow tenant vrf external-l3 epg

show tenant vrf external-l3 epg detailshow tenant WORD vrf WORD external-l3 epg <epgName> detail


Syntax:





Command Path:

# show tenant WORD vrf WORD external-l3 epg <epgName> detail


S Commandsshow tenant vrf external-l3 epg detail

show tenant vrf external-l3 epg nameshow tenant WORD vrf WORD external-l3 epg <epgName> name <epgName>


Syntax:






Command Path:

# show tenant WORD vrf WORD external-l3 epg <epgName> name <epgName>


S Commandsshow tenant vrf external-l3 epg name

show tenant vrf external-l3 epg name detailshow tenant WORD vrf WORD external-l3 epg <epgName> name <epgName> detail


Syntax:






Command Path:

# show tenant WORD vrf WORD external-l3 epg <epgName> name <epgName> detail


S Commandsshow tenant vrf external-l3 epg name detail

show tenant vrf external-l3 interfacesshow tenant WORD vrf WORD external-l3 interfaces


Syntax:




Command Path:

# show tenant WORD vrf WORD external-l3 interfaces


S Commandsshow tenant vrf external-l3 interfaces

show tenant vrf external-l3 interfaces detailshow tenant WORD vrf WORD external-l3 interfaces detail


Syntax:




Command Path:

# show tenant WORD vrf WORD external-l3 interfaces detail


S Commandsshow tenant vrf external-l3 interfaces detail

show tenant vrf external-l3 ospfshow tenant WORD vrf WORD external-l3 ospf


Syntax:




Command Path:

# show tenant WORD vrf WORD external-l3 ospf


S Commandsshow tenant vrf external-l3 ospf

show tenant vrf external-l3 ospf detailshow tenant WORD vrf WORD external-l3 ospf detail


Syntax:




Command Path:

# show tenant WORD vrf WORD external-l3 ospf detail


S Commandsshow tenant vrf external-l3 ospf detail

show tenant vrf external-l3 route-mapshow tenant WORD vrf WORD external-l3 route-map [name <l3out name>]


Syntax:





Command Path:

# show tenant WORD vrf WORD external-l3 route-map [name <l3out name>]


S Commandsshow tenant vrf external-l3 route-map

show tenant vrf external-l3 route-map detailshow tenant WORD vrf WORD external-l3 route-map [name <l3out name>] detail

Description: Show external-l3 route-map in detail with operational status

Syntax:





Command Path:

# show tenant WORD vrf WORD external-l3 route-map [name <l3out name>] detail


S Commandsshow tenant vrf external-l3 route-map detail

show tenant vrf external-l3 static-routeshow tenant WORD vrf WORD external-l3 static-route


Syntax:




Command Path:

# show tenant WORD vrf WORD external-l3 static-route


S Commandsshow tenant vrf external-l3 static-route

show tenant vrf external-l3 static-route detailshow tenant WORD vrf WORD external-l3 static-route detail


Syntax:




Command Path:

# show tenant WORD vrf WORD external-l3 static-route detail


S Commandsshow tenant vrf external-l3 static-route detail

show tenant vrf external-l3 static-route nodeshow tenant WORD vrf WORD external-l3 static-route node


Syntax:





Command Path:

# show tenant WORD vrf WORD external-l3 static-route node


S Commandsshow tenant vrf external-l3 static-route node

show tenant vrf external-l3 static-route node detailshow tenant WORD vrf WORD external-l3 static-route node detail


Syntax:





Command Path:

# show tenant WORD vrf WORD external-l3 static-route node detail


S Commandsshow tenant vrf external-l3 static-route node detail

show tenant vrf multicastshow tenant WORD vrf WORD multicast


Syntax:




Command Path:

# show tenant WORD vrf WORD multicast


S Commandsshow tenant vrf multicast

show troubleshoot epext sessionshow troubleshoot epext session <session_name>

Description: Show session

Syntax:

Session namesession_name


Command Path:

# show troubleshoot epext session <session_name>


S Commandsshow troubleshoot epext session

show troubleshoot epext session atomiccountershow troubleshoot epext session <session_name> atomiccounter

Description: Show atomic counters

Syntax:



Command Path:

# show troubleshoot epext session <session_name> atomiccounter


S Commandsshow troubleshoot epext session atomiccounter

show troubleshoot epext session auditshow troubleshoot epext session <session_name> audit

Description: Show audit

Syntax:



Command Path:

# show troubleshoot epext session <session_name> audit


S Commandsshow troubleshoot epext session audit

show troubleshoot epext session contractsshow troubleshoot epext session <session_name> contracts

Description: Show contracts

Syntax:



Command Path:

# show troubleshoot epext session <session_name> contracts


S Commandsshow troubleshoot epext session contracts

show troubleshoot epext session deploymentsshow troubleshoot epext session <session_name> deployments

Description: Show deployment changes

Syntax:



Command Path:

# show troubleshoot epext session <session_name> deployments


S Commandsshow troubleshoot epext session deployments

show troubleshoot epext session eventsshow troubleshoot epext session <session_name> events

Description: Show events

Syntax:



Command Path:

# show troubleshoot epext session <session_name> events


S Commandsshow troubleshoot epext session events

show troubleshoot epext session faultsshow troubleshoot epext session <session_name> faults

Description: Show faults

Syntax:



Command Path:

# show troubleshoot epext session <session_name> faults


S Commandsshow troubleshoot epext session faults

show troubleshoot epext session monitorshow troubleshoot epext session <session_name> monitor

Description: Show monitor

Syntax:



Command Path:

# show troubleshoot epext session <session_name> monitor


S Commandsshow troubleshoot epext session monitor

show troubleshoot epext session reportsshow troubleshoot epext session <session_name> reports

Description: Show reports

Syntax:



Command Path:

# show troubleshoot epext session <session_name> reports


S Commandsshow troubleshoot epext session reports

show troubleshoot epext session statisticsshow troubleshoot epext session <session_name> statistics


Syntax:



Command Path:

# show troubleshoot epext session <session_name> statistics


S Commandsshow troubleshoot epext session statistics

show troubleshoot epext session topologyshow troubleshoot epext session <session_name> topology

Description: Show topology

Syntax:



Command Path:

# show troubleshoot epext session <session_name> topology


S Commandsshow troubleshoot epext session topology

show troubleshoot epext session tracerouteshow troubleshoot epext session <session_name> traceroute

Description: Show traceroute

Syntax:



Command Path:

# show troubleshoot epext session <session_name> traceroute


S Commandsshow troubleshoot epext session traceroute

show troubleshoot epext sessionsshow troubleshoot epext sessions

Description: Show sessions


Command Path:

# show troubleshoot epext sessions


S Commandsshow troubleshoot epext sessions

show troubleshoot eptoep sessionshow troubleshoot eptoep session <session_name>

Description: Show session

Syntax:



Command Path:

# show troubleshoot eptoep session <session_name>


S Commandsshow troubleshoot eptoep session

show troubleshoot eptoep session atomiccountershow troubleshoot eptoep session <session_name> atomiccounter

Description: Show atomic counters

Syntax:



Command Path:

# show troubleshoot eptoep session <session_name> atomiccounter


S Commandsshow troubleshoot eptoep session atomiccounter

show troubleshoot eptoep session auditshow troubleshoot eptoep session <session_name> audit

Description: Show audit

Syntax:



Command Path:

# show troubleshoot eptoep session <session_name> audit


S Commandsshow troubleshoot eptoep session audit

show troubleshoot eptoep session contractsshow troubleshoot eptoep session <session_name> contracts

Description: Show contracts

Syntax:



Command Path:

# show troubleshoot eptoep session <session_name> contracts


S Commandsshow troubleshoot eptoep session contracts

show troubleshoot eptoep session deploymentsshow troubleshoot eptoep session <session_name> deployments

Description: Show deployment changes

Syntax:



Command Path:

# show troubleshoot eptoep session <session_name> deployments


S Commandsshow troubleshoot eptoep session deployments

show troubleshoot eptoep session eventsshow troubleshoot eptoep session <session_name> events

Description: Show events

Syntax:



Command Path:

# show troubleshoot eptoep session <session_name> events


S Commandsshow troubleshoot eptoep session events

show troubleshoot eptoep session faultsshow troubleshoot eptoep session <session_name> faults

Description: Show faults

Syntax:



Command Path:

# show troubleshoot eptoep session <session_name> faults


S Commandsshow troubleshoot eptoep session faults

show troubleshoot eptoep session monitorshow troubleshoot eptoep session <session_name> monitor

Description: Show monitor

Syntax:



Command Path:

# show troubleshoot eptoep session <session_name> monitor


S Commandsshow troubleshoot eptoep session monitor

show troubleshoot eptoep session reportsshow troubleshoot eptoep session <session_name> reports

Description: Show reports

Syntax:



Command Path:

# show troubleshoot eptoep session <session_name> reports


S Commandsshow troubleshoot eptoep session reports

show troubleshoot eptoep session statisticsshow troubleshoot eptoep session <session_name> statistics


Syntax:



Command Path:

# show troubleshoot eptoep session <session_name> statistics


S Commandsshow troubleshoot eptoep session statistics

show troubleshoot eptoep session topologyshow troubleshoot eptoep session <session_name> topology

Description: Show topology

Syntax:



Command Path:

# show troubleshoot eptoep session <session_name> topology


S Commandsshow troubleshoot eptoep session topology

show troubleshoot eptoep session tracerouteshow troubleshoot eptoep session <session_name> traceroute

Description: Show traceroute

Syntax:



Command Path:

# show troubleshoot eptoep session <session_name> traceroute


S Commandsshow troubleshoot eptoep session traceroute

show troubleshoot eptoep sessionsshow troubleshoot eptoep sessions

Description: Show sessions


Command Path:

# show troubleshoot eptoep sessions


S Commandsshow troubleshoot eptoep sessions

show usernameshow username <WORD>

Description: Show user information

Syntax:

User nameWORD


Command Path:

# show username <WORD>


S Commandsshow username

show username detailshow username <WORD> detail

Description: Show user information

Syntax:

User nameWORD


Command Path:

# show username <WORD> detail


S Commandsshow username detail

show versionshow version

Description: Show version information


Command Path:

# show version


S Commandsshow version

show vlan-domainshow vlan-domain [name <arg>] [vlan] [leaf <arg>] [detail]

Description: Show command for vlan-domain

Syntax:

(Optional) Vlan-domain namearg

(Optional) VLAN ID 1-4094 or range(s): 1-5, 10 or 2-5,7-19<vlan-range>

(Optional) Leaf id. Number range from=101 to=4000arg

(Optional) vlan-domain in detail with concrete MOsdetail


Command Path:

# show vlan-domain [name <>] [vlan] [leaf <>] [detail]


S Commandsshow vlan-domain

show vmm internal debugshow vmm internal debug

Description: Show vmm debug information


Command Path:

# show vmm internal debug


S Commandsshow vmm internal debug

show vmm internal debug epgshow vmm internal debug epg tenant <tenantName> application <applicationName> epg <epgName>

Description: Show vmm EPg debug information

Syntax:

tenant-nametenant

tenant-name<tenantName>

application-nameapplication

application-name<applicationName>

epg-nameepg

epg-name<epgName>


Command Path:

# show vmm internal debug epg tenant <tenantName> application <applicationName> epg <epgName>


S Commandsshow vmm internal debug epg

show vmm internal debug macshow vmm internal debug mac <macAddress>

Description: Show vmm mac address debug information

Syntax:

mac-address<macAddress>


Command Path:

# show vmm internal debug mac <macAddress>


S Commandsshow vmm internal debug mac

show vmware domainshow vmware domain

Description: Show VMware domain information


Command Path:

# show vmware domain


S Commandsshow vmware domain

show vmware domain nameshow vmware domain name <name>

Description: VMware domain name

Syntax:



Command Path:

# show vmware domain name <name>


S Commandsshow vmware domain name

show vmware domain name epgshow vmware domain name <name> epg

Description: Show VMware domain EPG details

Syntax:



Command Path:

# show vmware domain name <name> epg


S Commandsshow vmware domain name epg

show vmware domain name esxshow vmware domain name <name> esx <esx-ip>

Description: Show VMware ESX information

Syntax:


ESX IP<esx-ip>


Command Path:

# show vmware domain name <name> esx <esx-ip>


S Commandsshow vmware domain name esx

show vmware domain name port-groupshow vmware domain name <name> port-group

Description: Show VMware port group information

Syntax:



Command Path:

# show vmware domain name <name> port-group


S Commandsshow vmware domain name port-group

show vmware domain name trunk-portgroupshow vmware domain name <name> trunk-portgroup [name <name>]

Description: Show VMware domain trunk portgroup details

Syntax:


(Optional) trunk portgroup name<name>


Command Path:

# show vmware domain name <name> trunk-portgroup [name <name>]


S Commandsshow vmware domain name trunk-portgroup

show vmware domain name vcentershow vmware domain name <name> vcenter <hostname|ip>

Description: VMware vCenter ip or hostname

Syntax:


vCenter hostname or IP<hostname|ip>


Command Path:

# show vmware domain name <name> vcenter <hostname|ip>


S Commandsshow vmware domain name vcenter

show vmware domain name vmshow vmware domain name <name> vm


Syntax:



Command Path:

# show vmware domain name <name> vm


S Commandsshow vmware domain name vm

show vmware domain name vm nameshow vmware domain name <name> vm name <vm-name>

Description: Show detailed VMware VM information

Syntax:


VM Name<vm-name>


Command Path:

# show vmware domain name <name> vm name <vm-name>


S Commandsshow vmware domain name vm name

show vmware vmshow vmware vm [name <WORD>] [ip <A.B.C.D>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE >]


Syntax:

(Optional) Specify a VM nameWORD

(Optional) IP address in format i.i.i.iA.B.C.D




Command Path:

# show vmware vm [name <WORD>] [ip <A.B.C.D>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE >]


S Commandsshow vmware vm

show vpcshow vpc map <vpc-list>

Description: Show vpc mapping

Syntax:

Map by namemap

vpc names<vpc-list>


Command Path:

# show vpc map <vpc-list>


S Commandsshow vpc

show vpc map leafshow vpc map <vpc-list> leaf WORD [fex <NUMBER>]

Description: Leaf

Syntax:

Map by namemap

vpc names<vpc-list>


(Optional) Fex ID. Number range from=101 to=164<101-164>


Command Path:

# show vpc map <vpc-list> leaf WORD [fex <NUMBER>]


S Commandsshow vpc map leaf

show vrfshow vrf WORD


Syntax:



Command Path:

# show vrf WORD


S Commandsshow vrf

show vrf detailshow vrf WORD detail


Syntax:



Command Path:

# show vrf WORD detail


S Commandsshow vrf detail

show vsan-domainshow vsan-domain [name <arg>] [detail]

Description: Show command for vsan-domain

Syntax:

(Optional) Vsan-domain namearg

(Optional) Vsan-domain detailed informationdetail


Command Path:

# show vsan-domain [name <>] [detail]


S Commandsshow vsan-domain

shutshut

Description: Disable BFD

Command Mode: template bfd : Configure BFD Interface Policy Templates

Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# template bfd <WORD> tenant <WORD>(config-template-bfd-pol)# shut

shut

Description: Disable BFD

Command Mode: template bfd : Configure BFD Interface Policy Templates

Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# template bfd <WORD> tenant <WORD>(config-template-bfd-pol)# shut

shut

Description: Disable monitor session

Command Mode: monitor virtual : Configure monitor session for virtual switches

Command Path:

# configure [['terminal', 't']](config)# monitor virtual session <WORD>(config-monitor-virtual)# shut


S Commandsshut

shutdownshutdown

Description: Administrative state of the Policer


Command Path:

# configure [['terminal', 't']](config)# policy-map type data-plane <WORD>(config-pmap-dpp)# shutdown

shutdown

Description: Disable the class of service specified

Command Mode: qos parameters : Configure the global QOS policies

Command Path:

# configure [['terminal', 't']](config)# qos parameters level1|level2|level3(config-qos)# shutdown

shutdown

Description: Administrative state of the Policer


Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# policy-map type data-plane <WORD>(config-tenant-pmap-dpp)# shutdown

shutdown

Description: dscp-map toggling

Command Mode: qos : Set DSCP Class translation values

Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# qos dscp-map <WORD>(config-qos-cmap)# shutdown

shutdown

Description: Disable Interface



S Commandsshutdown

Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface ethernet <ifRange>(config-leaf-if)# shutdown

shutdown

Description: Disable Port Channel


Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# shutdown

shutdown


Command Mode: interface vfc : Virtual Fiber Channel interface

Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface vfc <ifRange>(config-leaf-if)# shutdown

shutdown


Command Mode: interface vfc-po : VFC Port Channel interface

Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface vfc-po <WORD> [fex <fex>](config-leaf-if)# shutdown

shutdown



Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface ethernet <ifRange>(config-leaf-if)# shutdown


S Commandsshutdown

shutdown

Description: Disable Port Channel


Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# shutdown

shutdown



Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface vfc <ifRange>(config-leaf-if)# shutdown

shutdown



Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface vfc-po <WORD> [fex <fex>](config-leaf-if)# shutdown

shutdown

Description: Disable interface


Command Path:

# configure [['terminal', 't']](config)# vpc context leaf <101-4000> <101-4000> [fex <fex>](config-vpc)# interface vpc <WORD> [fex <fex>](config-vpc-if)# shutdown

shutdown


Command Mode: monitor access : Configue monitor session for access interfaces

Command Path:



S Commandsshutdown

(config)# monitor access session <session_name>(config-monitor-access)# shutdown

shutdown


Command Mode: monitor fabric : Configue monitor session for fabric interfaces

Command Path:

# configure [['terminal', 't']](config)# monitor fabric session <session_name>(config-monitor-fabric)# shutdown

shutdown


Command Mode: monitor tenant : Configue monitor session for tenant EPGs

Command Path:

# configure [['terminal', 't']](config)# monitor tenant <tenant_name> session <WORD>(config-monitor-tenant)# shutdown


S Commandsshutdown

site-idsite-id <WORD>

Description: ID of the network where the site is deployed

Syntax:

The site id (Max Size 512) surrounded by quotesWORD

Command Mode: destination-profile : Configure destination profile Parameters

Command Path:

# configure [['terminal', 't']](config)# callhome common(config-callhome)# destination-profile(config-callhome-destnprof)# site-id <WORD>


S Commandssite-id

slow-drain congestion-timeout actionslow-drain congestion-timeout action err-disable|log

Description: Configure congestion action

Syntax:

Error disableerr-disable

Sysloglog

Command Mode: template policy-group : Configure Policy Group Parameters

Command Path:

# configure [['terminal', 't']](config)# template policy-group <WORD>(config-pol-grp-if)# slow-drain congestion-timeout action err-disable|log

slow-drain congestion-timeout action err-disable|log


Syntax:


Sysloglog

Command Mode: template port-channel : Configure Port-Channel Parameters

Command Path:

# configure [['terminal', 't']](config)# template port-channel <WORD>(config-po-ch-if)# slow-drain congestion-timeout action err-disable|log



Syntax:


Sysloglog



S Commandsslow-drain congestion-timeout action

Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface ethernet <ifRange>(config-leaf-if)# slow-drain congestion-timeout action err-disable|log



Syntax:


Sysloglog


Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# slow-drain congestion-timeout action err-disable|log



Syntax:


Sysloglog


Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface ethernet <ifRange>(config-leaf-if)# slow-drain congestion-timeout action err-disable|log



Syntax:




Sysloglog


Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# slow-drain congestion-timeout action err-disable|log



Syntax:


Sysloglog


Command Path:

# configure [['terminal', 't']](config)# vpc context leaf <101-4000> <101-4000> [fex <fex>](config-vpc)# interface vpc <WORD> [fex <fex>](config-vpc-if)# slow-drain congestion-timeout action err-disable|log



slow-drain congestion-timeout countslow-drain congestion-timeout count <NUMBER>

Description: Configure number of pause frames per second

Syntax:

Configure number of pause frames per second. Number range from=1to=10000

<range>


Command Path:

# configure [['terminal', 't']](config)# template policy-group <WORD>(config-pol-grp-if)# slow-drain congestion-timeout count <NUMBER>

slow-drain congestion-timeout count <NUMBER>


Syntax:


<range>


Command Path:

# configure [['terminal', 't']](config)# template port-channel <WORD>(config-po-ch-if)# slow-drain congestion-timeout count <NUMBER>



Syntax:


<range>


Command Path:



S Commandsslow-drain congestion-timeout count

(config)# leaf <101-4000>(config-leaf)# interface ethernet <ifRange>(config-leaf-if)# slow-drain congestion-timeout count <NUMBER>



Syntax:


<range>


Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# slow-drain congestion-timeout count <NUMBER>



Syntax:


<range>


Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface ethernet <ifRange>(config-leaf-if)# slow-drain congestion-timeout count <NUMBER>



Syntax:


<range>




Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# slow-drain congestion-timeout count <NUMBER>



Syntax:


<range>


Command Path:

# configure [['terminal', 't']](config)# vpc context leaf <101-4000> <101-4000> [fex <fex>](config-vpc)# interface vpc <WORD> [fex <fex>](config-vpc-if)# slow-drain congestion-timeout count <NUMBER>



slow-drain pauseslow-drain pause timeout <NUMBER>

Description: Configure pause frame timeout

Syntax:

Configure pause frame timeouttimeout

Configure pause timeout in milliseconds. Number range from=100to=1000

<interval>


Command Path:

# configure [['terminal', 't']](config)# template policy-group <WORD>(config-pol-grp-if)# slow-drain pause timeout <NUMBER>

slow-drain pause timeout <NUMBER>


Syntax:



<interval>


Command Path:

# configure [['terminal', 't']](config)# template port-channel <WORD>(config-po-ch-if)# slow-drain pause timeout <NUMBER>



Syntax:



<interval>


S Commandsslow-drain pause


Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface ethernet <ifRange>(config-leaf-if)# slow-drain pause timeout <NUMBER>



Syntax:



<interval>


Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# slow-drain pause timeout <NUMBER>



Syntax:



<interval>


Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface ethernet <ifRange>(config-leaf-if)# slow-drain pause timeout <NUMBER>





Syntax:



<interval>


Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# slow-drain pause timeout <NUMBER>



Syntax:



<interval>


Command Path:

# configure [['terminal', 't']](config)# vpc context leaf <101-4000> <101-4000> [fex <fex>](config-vpc)# interface vpc <WORD> [fex <fex>](config-vpc-if)# slow-drain pause timeout <NUMBER>



slow-timerslow-timer <NUMBER>

Description: Configure BFD SLOW-TIMER value in milliseconds

Syntax:

BFD interval. Number range from=1000 to=30000<interval>

Command Mode: template bfd : BFD group of commands

Command Path:

# configure [['terminal', 't']](config)# template bfd ip|ipv6 <WORD>(config-bfd)# slow-timer <NUMBER>


S Commandsslow-timer

snapshot downloadsnapshot download <WORD>

Description: Configuration snapshot download setup mode

Syntax:

Snapshot downloader nameWORD


Command Path:

# configure [['terminal', 't']](config)# snapshot download <WORD>


S Commandssnapshot download

snapshot exportsnapshot export <WORD>

Description: Configuration export setup mode

Syntax:

Export configuration nameWORD


Command Path:

# configure [['terminal', 't']](config)# snapshot export <WORD>


S Commandssnapshot export

snapshot importsnapshot import <WORD>

Description: Configuration import setup mode

Syntax:

Import configuration nameWORD


Command Path:

# configure [['terminal', 't']](config)# snapshot import <WORD>


S Commandssnapshot import

snapshot rollbacksnapshot rollback <WORD>

Description: Configuration rollback setup mode

Syntax:

Rollback configuration nameWORD


Command Path:

# configure [['terminal', 't']](config)# snapshot rollback <WORD>


S Commandssnapshot rollback

snapshot uploadsnapshot upload <WORD>

Description: Configuration snapshot upload setup mode

Syntax:

Snapshot uploader nameWORD


Command Path:

# configure [['terminal', 't']](config)# snapshot upload <WORD>


S Commandssnapshot upload

snmp-server clientgroupsnmp-server clientgroup <group-name> [management-epg <mgmt-epg>] [client <ip-address/hostname>]

Description: Configure SNMP client-group

Syntax:

SNMP clientgroup<group-name>

(Optional) Management EPG (default: oob-default)<mgmt-epg>

(Optional) Ip-address/hostname of the snmp client<ip-address/hostname>

Command Mode: template snmp-fabric : Simple Network Management Protocol (SNMP)

Command Path:

# configure [['terminal', 't']](config)# template snmp-fabric <WORD>(config-template-snmp-fabric)# snmp-server clientgroup <group-name> [management-epg<mgmt-epg>] [client <ip-address/hostname>]


S Commandssnmp-server clientgroup

snmp-server communitysnmp-server community <community-name>

Description: Configure SNMP community

Syntax:

SNMP community<community-name>


Command Path:

# configure [['terminal', 't']](config)# template snmp-fabric <WORD>(config-template-snmp-fabric)# snmp-server community <community-name>


S Commandssnmp-server community

snmp-server contactsnmp-server contact <contact-name>

Description: Configure SNMP contact

Syntax:

SNMP contact name<contact-name>


Command Path:

# configure [['terminal', 't']](config)# template snmp-fabric <WORD>(config-template-snmp-fabric)# snmp-server contact <contact-name>


S Commandssnmp-server contact

snmp-server hostsnmp-server host <ip-address/hostname> traps-version 1|2c|3 <community> auth|none|priv [udp-port <port>][management-epg <mgmt-epg>]

Description: Configure SNMP trap host

Syntax:

Ip-address/hostname of the snmp trap destination<ip-address/hostname>

SNMP Version to use for trapstraps-version

Use SNMPv11

Use SNMPv22c

Use SNMPv33

SNMP community/security<community>

Use Authentication Onlyauth

Use No Authenticationnone

Use Authentication and Encryptionpriv

(Optional) UDP port for traps (default 162)<port>

(Optional) Management EPG (default: oob-default)<mgmt-epg>


Command Path:

# configure [['terminal', 't']](config)# template snmp-fabric <WORD>(config-template-snmp-fabric)# snmp-server host <ip-address/hostname> traps-version 1|2c|3<community> auth|none|priv [udp-port <port>] [management-epg <mgmt-epg>]


S Commandssnmp-server host

snmp-server locationsnmp-server location <location-name>

Description: Configure SNMP location

Syntax:

SNMP location<location-name>


Command Path:

# configure [['terminal', 't']](config)# template snmp-fabric <WORD>(config-template-snmp-fabric)# snmp-server location <location-name>


S Commandssnmp-server location

snmp-server protocolsnmp-server protocol enable

Description: Enable SNMP protocol

Syntax:

Enable SNMP protocolenable


Command Path:

# configure [['terminal', 't']](config)# template snmp-fabric <WORD>(config-template-snmp-fabric)# snmp-server protocol enable


S Commandssnmp-server protocol

snmp-server usersnmp-server user <user-name> auth sha|md5 priv aes|des|none

Description: Configure SNMP user

Syntax:

SNMP user<user-name>

Authentication Typeauth

Use HMAC SHA algorithm for authenticationsha

Use HMAC MD5 algorithm for authenticationmd5

Privacy Typepriv

Use 128-bit AES algorithm for privacyaes

Use 64-bit DES algorithm for privacydes

Do not use privacynone


Command Path:

# configure [['terminal', 't']](config)# template snmp-fabric <WORD>(config-template-snmp-fabric)# snmp-server user <user-name> auth sha|md5 priv aes|des|none


S Commandssnmp-server user

sourcesource address <A.B.C.D|A:B::C:D/LEN>

Description: Configure source

Syntax:

IP Addressaddress

Source of the exporter in format x.x.x.x|x::x/m. Recommended to containroom for at least 12 host bits

A.B.C.D|A:B::C:D/LEN

Command Mode: flow exporter : Configure Netflow Exporter

Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# flow exporter <WORD> destination address <A.B.C.D or A:B::C:D> transportudp <dstPort>(config-tn-flow-exporter)# source address <A.B.C.D|A:B::C:D/LEN>

source address <A.B.C.D|A:B::C:D/LEN>


Syntax:

IP Addressaddress



Command Mode: flow exporter : Configure Netflow Exporter

Command Path:

# configure [['terminal', 't']](config)# flow exporter <WORD> destination address <A.B.C.D or A:B::C:D> transport udp<dstPort>(config-flow-exporter)# source address <A.B.C.D|A:B::C:D/LEN>

source address <A.B.C.D|A:B::C:D/LEN>


Syntax:

IP Addressaddress


S Commandssource



Command Mode: flow vm-exporter : Configure NetFlow Exporter for VM Networking

Command Path:

# configure [['terminal', 't']](config)# flow vm-exporter <WORD> destination address <A.B.C.D or A:B::C:D> transport udp<dstPort>(config-flow-vm-exporter)# source address <A.B.C.D|A:B::C:D/LEN>

source tenant <WORD> application <WORD> epg <WORD> [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE >]

Description: Configure monitor virtual source

Syntax:

tenanttenant

tenant name (Max Size 63)WORD

applicationapplication

application name (Max Size 64)WORD

epgepg

epg name (Max Size 64)WORD



Command Mode: monitor virtual : Configure monitor session for virtual switches

Command Path:

# configure [['terminal', 't']](config)# monitor virtual session <WORD>(config-monitor-virtual)# source tenant <WORD> application <WORD> epg <WORD> [mac <E.E.EEE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >]


S Commandssource

source applicationsource application <application_name> epg <epg_name>

Description: Configure EPG as monitor source

Syntax:

application name (Max Size 64)application_name

epgepg

epg name (Max Size 64)epg_name

Command Mode: monitor tenant : Configue monitor session for tenant EPGs

Command Path:

# configure [['terminal', 't']](config)# monitor tenant <tenant_name> session <WORD>(config-monitor-tenant)# source application <application_name> epg <epg_name>


S Commandssource application

source interface ethernetsource interface ethernet <ethernet> leaf <leaf Id>

Description: Configure monitor for ethernet access interfaces

Syntax:

List of ethernet itfs<ethernet>

leafleaf

leaf Id<leaf Id>


Command Path:

# configure [['terminal', 't']](config)# monitor access session <session_name>(config-monitor-access)# source interface ethernet <ethernet> leaf <leaf Id>

source interface ethernet <ethernet> switch <switch Id>

Description: Configure monitor for ethernet fabric interfaces

Syntax:

ethernet interface range<ethernet>

switchswitch

switch Id<switch Id>

Command Mode: monitor fabric : Configue monitor session for fabric interfaces

Command Path:

# configure [['terminal', 't']](config)# monitor fabric session <session_name>(config-monitor-fabric)# source interface ethernet <ethernet> switch <switch Id>


S Commandssource interface ethernet

source interface port-channelsource interface port-channel <port-channel list> leaf <leaf Id> [fex <fex Id>]

Description: Configure monitor for port-channel interfaces

Syntax:

<port-channel list><port-channel list>

leafleaf

leaf Id<leaf Id>

(Optional) fex Id<fex Id>


Command Path:

# configure [['terminal', 't']](config)# monitor access session <session_name>(config-monitor-access)# source interface port-channel <port-channel list> leaf <leaf Id>[fex <fex Id>]


S Commandssource interface port-channel

source interface vpcsource interface vpc <vpc list> leaf <leaf Id1> <leaf Id2> [fex <fex Ids>]

Description: Configure monitor for VPC interfaces

Syntax:

<vpc list><vpc list>

leafleaf

leaf Id1<leaf Id1>

leaf Id2<leaf Id2>

(Optional) paired fex Ids<fex Ids>


Command Path:

# configure [['terminal', 't']](config)# monitor access session <session_name>(config-monitor-access)# source interface vpc <vpc list> leaf <leaf Id1> <leaf Id2> [fex<fex Ids>]


S Commandssource interface vpc

spanning-treespanning-tree mst configuration

Description: STP MST configuration mode

Syntax:

Multiple spanning treemst

Configure multiple spanning tree protocolconfiguration


Command Path:

# configure [['terminal', 't']](config)# spanning-tree mst configuration

spanning-tree

Description: Add spanning tree

Command Mode: template leaf-policy-group : Configure Leaf Policy Group

Command Path:

# configure [['terminal', 't']](config)# template leaf-policy-group <WORD>(config-leaf-policy-group)# spanning-tree

spanning-tree bpdu-filter|bpdu-guard <enable|disable>

Description: Enable or Disable BPDU filter/guard

Syntax:

Don't send or receive BPDUs on this interfacebpdu-filter

Don't accept BPDUs on this interfacebpdu-guard

enable/disable BPDU filter/guard<enable|disable>


Command Path:

# configure [['terminal', 't']](config)# template policy-group <WORD>(config-pol-grp-if)# spanning-tree bpdu-filter|bpdu-guard <enable|disable>


S Commandsspanning-tree


Description: Enable BPDU filter/guard

Syntax:





Command Path:

# configure [['terminal', 't']](config)# template port-channel <WORD>(config-po-ch-if)# spanning-tree bpdu-filter|bpdu-guard <enable|disable>


Description: Enable or disable BPDU filter/guard

Syntax:





Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface ethernet <ifRange>(config-leaf-if)# spanning-tree bpdu-filter|bpdu-guard <enable|disable>



Syntax:







Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# spanning-tree bpdu-filter|bpdu-guard <enable|disable>


Description: Enable or disable BPDU filter/guard

Syntax:





Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface ethernet <ifRange>(config-leaf-if)# spanning-tree bpdu-filter|bpdu-guard <enable|disable>



Syntax:





Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# spanning-tree bpdu-filter|bpdu-guard <enable|disable>




Description: Spanning Tree Subsystem

Syntax:





Command Path:

# configure [['terminal', 't']](config)# vpc context leaf <101-4000> <101-4000> [fex <fex>](config-vpc)# interface vpc <WORD> [fex <fex>](config-vpc-if)# spanning-tree bpdu-filter|bpdu-guard <enable|disable>



spanning-tree bpdu-filterspanning-tree bpdu-filter enable|disable|default

Description: Configure BPDU filter override on AVS uplink ports

Syntax:

Enable BPDU filterenable

Disable BPDU filterdisable

Remove BPDU filter/guard override policydefault

Command Mode: configure-avs : Configure a VMWare Domain as AVS (N1K) type

Command Path:

# configure [['terminal', 't']](config)# vmware-domain <WORD> [delimiter <WORD>](config-vmware)# configure-avs(config-vmware-avs)# spanning-tree bpdu-filter enable|disable|default


S Commandsspanning-tree bpdu-filter

spanning-tree bpdu-guardspanning-tree bpdu-guard enable|disable|default

Description: Configure BPDU guard override on AVS uplink ports

Syntax:

Enable BPDU guardenable

Disable BPDU guarddisable

Remove BPDU filter/guard override policydefault


Command Path:

# configure [['terminal', 't']](config)# vmware-domain <WORD> [delimiter <WORD>](config-vmware)# configure-avs(config-vmware-avs)# spanning-tree bpdu-guard enable|disable|default


S Commandsspanning-tree bpdu-guard

speedspeed <interfaceSpeed>

Description: Configure Interface Speed

Syntax:

Interface Speed Policy<interfaceSpeed>


Command Path:

# configure [['terminal', 't']](config)# template policy-group <WORD>(config-pol-grp-if)# speed <interfaceSpeed>

speed <portChannelSpeed>


Syntax:

Port-Channel Speed Policy<portChannelSpeed>


Command Path:

# configure [['terminal', 't']](config)# template port-channel <WORD>(config-po-ch-if)# speed <portChannelSpeed>

speed <interfaceSpeed>


Syntax:


Command Mode: template spine-interface-policy-group : Configure Policy Group Parameters

Command Path:

# configure [['terminal', 't']](config)# template spine-interface-policy-group <WORD>(config-spine-if-pol-grp)# speed <interfaceSpeed>


S Commandsspeed



Syntax:



Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface ethernet <ifRange>(config-leaf-if)# speed <interfaceSpeed>

speed <speed>


Syntax:

Speed Value<speed>


Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# speed <speed>



Syntax:



Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface ethernet <ifRange>(config-leaf-if)# speed <interfaceSpeed>


S Commandsspeed

speed <speed>


Syntax:

Speed Value<speed>


Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# speed <speed>

speed <speed>


Syntax:

Interface Speed Policy<speed>


Command Path:

# configure [['terminal', 't']](config)# vpc context leaf <101-4000> <101-4000> [fex <fex>](config-vpc)# interface vpc <WORD> [fex <fex>](config-vpc-if)# speed <speed>


S Commandsspeed

spf-intervalspf-interval level-1 <NUMBER> <50-120000> <50-120000>

Description: Set the ISIS SPF maximal wait interval

Syntax:

Level 1level-1

SPF maximum wait interval. Number range from=50 to=120000<50-120000>

Initial and secondary wait intervals (both values are required)<50-120000> <50-120000>

Command Mode: isis : Intermediate System to Intermediate System (IS-IS)

Command Path:

# configure [['terminal', 't']](config)# pod <NUMBER>(config-pod)# isis fabric(config-pod-isis)# spf-interval level-1 <NUMBER> <50-120000> <50-120000>

spf-interval level-1 <NUMBER> <50-120000> <50-120000>

Description: Set the ISIS SPF maximal wait interval

Syntax:

Level 1level-1

SPF maximum wait interval. Number range from=50 to=120000<50-120000>

Initial and secondary wait intervals (both values are required)<50-120000> <50-120000>

Command Mode: template isis-fabric : InterSystem-InterSystem Protocol (IS-IS)

Command Path:

# configure [['terminal', 't']](config)# template isis-fabric <WORD>(config-template-isis-fabric)# spf-interval level-1 <NUMBER> <50-120000> <50-120000>


S Commandsspf-interval

spine-groupspine-group <WORD>

Description: Configure Spine Group

Syntax:

Spine Group name (Max Size 64)WORD

Command Mode: spine-profile : Configure Spine Profile

Command Path:

# configure [['terminal', 't']](config)# spine-profile <WORD>(config-spine-profile)# spine-group <WORD>


S Commandsspine-group

spine-interface-groupspine-interface-group <WORD>

Description: Configure Spine Interface Group

Syntax:

Spine Interface Group name (Max Size 64)WORD

Command Mode: spine-interface-profile : Create Spine Interface Profile

Command Path:

# configure [['terminal', 't']](config)# spine-interface-profile <WORD>(config-spine-if-profile)# spine-interface-group <WORD>


S Commandsspine-interface-group

spine-interface-policy-groupspine-interface-policy-group <WORD>

Description: Associate an Interface Policy Group to this Interface Group

Syntax:

Spine Interface Policy Group Name (Max Size 64)WORD

Command Mode: spine-interface-group : Configure Spine Interface Group

Command Path:

# configure [['terminal', 't']](config)# spine-interface-profile <WORD>(config-spine-if-profile)# spine-interface-group <WORD>(config-spine-if-group)# spine-interface-policy-group <WORD>

spine-interface-policy-group <WORD> [force]

Description: Configure Spine Interface Policy Group

Syntax:


(Optional) Delete Per Port Configuration and applyspine-interface-policy-group config

force


Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface ethernet <ifRange>(config-leaf-if)# spine-interface-policy-group <WORD> [force]

spine-interface-policy-group <WORD> [force]

Description: Configure Spine Interface Policy Group

Syntax:


(Optional) Delete Per Port Configuration and applyspine-interface-policy-group config

force


S Commandsspine-interface-policy-group


Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface ethernet <ifRange>(config-leaf-if)# spine-interface-policy-group <WORD> [force]


S Commandsspine-interface-policy-group

spine-interface-profilespine-interface-profile <WORD>

Description: Attach Spine Interface Profile to the Spine Profile

Syntax:

Spine Interface Profile name (Max Size 64)WORD

Command Mode: spine-profile : Configure Spine Profile

Command Path:

# configure [['terminal', 't']](config)# spine-profile <WORD>(config-spine-profile)# spine-interface-profile <WORD>

spine-interface-profile <WORD>

Description: Create Spine Interface Profile

Syntax:

Spine Interface Profile name (Max Size 64)WORD


Command Path:

# configure [['terminal', 't']](config)# spine-interface-profile <WORD>


S Commandsspine-interface-profile

spine-profilespine-profile <WORD>

Description: Configure Spine Profile

Syntax:

Spine Profile name (Max Size 64)WORD


Command Path:

# configure [['terminal', 't']](config)# spine-profile <WORD>


S Commandsspine-profile

spinespine <101-4000>

Description: Provide a Range of Nodes

Syntax:

Spine Range or Spine Name List<101-4000>

Command Mode: spine-group : Configure Spine Group

Command Path:

# configure [['terminal', 't']](config)# spine-profile <WORD>(config-spine-profile)# spine-group <WORD>(config-spine-group)# spine <101-4000>

spine <101-4000>

Description: Configure Spine Node

Syntax:

Spine Range or Spine Name List<101-4000>


Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>


S Commandsspine

ssh-keyssh-key <WORD>

Description: Update ssh key for the user for ssh authentication

Syntax:

A name for SSH key (Max Size 64)WORD

Command Mode: username : Create a locally-authenticated user account

Command Path:

# configure [['terminal', 't']](config)# username <WORD>(config-username)# ssh-key <WORD>


S Commandsssh-key

ssh-servicessh-service

Description: SSH communication policy group

Command Mode: comm-policy : Configure any communication policy, ssh/telnet/shellinabox/http/https

Command Path:

# configure [['terminal', 't']](config)# comm-policy <WORD>(config-comm-policy)# ssh-service


S Commandsssh-service

ssl-protocolsssl-protocols <sslProtocols>

Description: Set the SSL protocol (comma separated values)

Syntax:

SSL Protocols as comma separated values like val1,val2,..valNsslProtocols

Command Mode: https : HTTPS communication policy group

Command Path:

# configure [['terminal', 't']](config)# comm-policy <WORD>(config-comm-policy)# https(config-https)# ssl-protocols <sslProtocols>


S Commandsssl-protocols

ssl-validation-levelssl-validation-level <ssl-validation-level>

Description: Set the LDAP Server SSL Certificate validation level

Syntax:

<ssl-validation-level><ssl-validation-level>

Command Mode: ldap-server host : LDAP server DNS name or IP address

Command Path:

# configure [['terminal', 't']](config)# ldap-server host <A.B.C.D|A:B::C:D|WORD>(config-host)# ssl-validation-level <ssl-validation-level>


S Commandsssl-validation-level

statestate <WORD>

Description: Set The state or province in which the organization is located.

Syntax:

state or province (Max Size 64)<WORD>

Command Mode: csr : A csr mode to create and hold an SSL certificate

Command Path:

# configure [['terminal', 't']](config)# crypto keyring <WORD>(config-keyring)# csr(config-csr)# state <WORD>

state <cipherState>

Description: Cipher state

Syntax:

Cipher state as comma separated values like val1,val2,..valNcipherState

Command Mode: ciphers : HTTPS cipher suite

Command Path:

# configure [['terminal', 't']](config)# comm-policy <WORD>(config-comm-policy)# https(config-https)# ciphers <WORD>(config-ciphers)# state <cipherState>


S Commandsstate

static-endpointstatic-endpoint mac E.E.E|EE-EE-EE-EE-EE-EE|EE:EE:EE:EE:EE:EE|EEEE.EEEE.EEEE vlan <NUMBER> [ip<A1.B1.C1.D1,...,An.Bn.Cn.Dn>] [ipv6 <A1:B1::C1:D1,..,An:Bn::Cn:Dn>]

Description: Configure Silent Host behind an EPG with a Static Path Attachment

Syntax:

MAC addressmac

MAC address (Option 1)E.E.E

MAC address (Option 2)EE-EE-EE-EE-EE-EE

MAC address (Option 3)EE:EE:EE:EE:EE:EE

MAC address (Option 4)EEEE.EEEE.EEEE

Encapsulation Vlanvlan

Encapsulation Vlan. Number range from=1 to=4094<1-4094>

(Optional) List of IP addresses in format i.i.i.iA1.B1.C1.D1,...,An.Bn.Cn.Dn

(Optional) List of IPv6 address in format xxxx:xxxx, xxxx::xxA1:B1::C1:D1,..,An:Bn::Cn:Dn


Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface ethernet <ifRange>(config-leaf-if)# static-endpoint mac E.E.E|EE-EE-EE-EE-EE-EE|EE:EE:EE:EE:EE:EE|EEEE.EEEE.EEEEvlan <NUMBER> [ip <A1.B1.C1.D1,...,An.Bn.Cn.Dn>] [ipv6 <A1:B1::C1:D1,..,An:Bn::Cn:Dn>]

static-endpoint mac E.E.E|EE-EE-EE-EE-EE-EE|EE:EE:EE:EE:EE:EE|EEEE.EEEE.EEEE vlan <NUMBER> [ip<A1.B1.C1.D1,...,An.Bn.Cn.Dn>] [ipv6 <A1:B1::C1:D1,..,An:Bn::Cn:Dn>]

Description: Configure silent Host behind an EPG with a Static Path Attachment

Syntax:

MAC addressmac





S Commandsstatic-endpoint







Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# static-endpoint mac E.E.E|EE-EE-EE-EE-EE-EE|EE:EE:EE:EE:EE:EE|EEEE.EEEE.EEEEvlan <NUMBER> [ip <A1.B1.C1.D1,...,An.Bn.Cn.Dn>] [ipv6 <A1:B1::C1:D1,..,An:Bn::Cn:Dn>]


Description: Configure Silent Host behind an EPG with a Static Path Attachment

Syntax:

MAC addressmac










Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>



(config-spine)# interface ethernet <ifRange>(config-leaf-if)# static-endpoint mac E.E.E|EE-EE-EE-EE-EE-EE|EE:EE:EE:EE:EE:EE|EEEE.EEEE.EEEEvlan <NUMBER> [ip <A1.B1.C1.D1,...,An.Bn.Cn.Dn>] [ipv6 <A1:B1::C1:D1,..,An:Bn::Cn:Dn>]


Description: Configure silent Host behind an EPG with a Static Path Attachment

Syntax:

MAC addressmac










Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# static-endpoint mac E.E.E|EE-EE-EE-EE-EE-EE|EE:EE:EE:EE:EE:EE|EEEE.EEEE.EEEEvlan <NUMBER> [ip <A1.B1.C1.D1,...,An.Bn.Cn.Dn>] [ipv6 <A1:B1::C1:D1,..,An:Bn::Cn:Dn>]


Description: Configure silent Host behind a EPG with a Static Path Attachment

Syntax:

MAC addressmac












Command Path:

# configure [['terminal', 't']](config)# vpc context leaf <101-4000> <101-4000> [fex <fex>](config-vpc)# interface vpc <WORD> [fex <fex>](config-vpc-if)# static-endpoint mac E.E.E|EE-EE-EE-EE-EE-EE|EE:EE:EE:EE:EE:EE|EEEE.EEEE.EEEEvlan <NUMBER> [ip <A1.B1.C1.D1,...,An.Bn.Cn.Dn>] [ipv6 <A1:B1::C1:D1,..,An:Bn::Cn:Dn>]



static-tepstatic-tep mac E.E.E|EE-EE-EE-EE-EE-EE|EE:EE:EE:EE:EE:EE|EEEE.EEEE.EEEE vlan <NUMBER> <A.B.C.D>

Description: Configure a static Tunnel Endpoint behind an EPG with a Static Path Attachment

Syntax:

MAC addressmac






VLAN range. Number range from=1 to=4094<1-4094>

IP address in format i.i.i.iA.B.C.D


Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface ethernet <ifRange>(config-leaf-if)# static-tep mac E.E.E|EE-EE-EE-EE-EE-EE|EE:EE:EE:EE:EE:EE|EEEE.EEEE.EEEEvlan <NUMBER> <A.B.C.D>

static-tep mac E.E.E|EE-EE-EE-EE-EE-EE|EE:EE:EE:EE:EE:EE|EEEE.EEEE.EEEE vlan <NUMBER> <A.B.C.D>


Syntax:

MAC addressmac







S Commandsstatic-tep




Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# static-tep mac E.E.E|EE-EE-EE-EE-EE-EE|EE:EE:EE:EE:EE:EE|EEEE.EEEE.EEEEvlan <NUMBER> <A.B.C.D>



Syntax:

MAC addressmac









Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface ethernet <ifRange>(config-leaf-if)# static-tep mac E.E.E|EE-EE-EE-EE-EE-EE|EE:EE:EE:EE:EE:EE|EEEE.EEEE.EEEEvlan <NUMBER> <A.B.C.D>



Syntax:



MAC addressmac









Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# static-tep mac E.E.E|EE-EE-EE-EE-EE-EE|EE:EE:EE:EE:EE:EE|EEEE.EEEE.EEEEvlan <NUMBER> <A.B.C.D>


Description: Configure a static Tunnel Endpoint behind a EPG with a Static Path Attachment

Syntax:

MAC addressmac











Command Path:

# configure [['terminal', 't']](config)# vpc context leaf <101-4000> <101-4000> [fex <fex>](config-vpc)# interface vpc <WORD> [fex <fex>](config-vpc-if)# static-tep mac E.E.E|EE-EE-EE-EE-EE-EE|EE:EE:EE:EE:EE:EE|EEEE.EEEE.EEEEvlan <NUMBER> <A.B.C.D>



statisticsstatistics enable

Description: Enable/disable stats collection on vCenter

Syntax:

enableenable

Command Mode: vcenter : Configure a vCenter in the VMware domain

Command Path:

# configure [['terminal', 't']](config)# vmware-domain <WORD> [delimiter <WORD>](config-vmware)# vcenter <> datacenter <WORD> [dvs-version <>](config-vmware-vc)# statistics enable


S Commandsstatistics

storm-control levelstorm-control level <0-100> [burst-rate <0-100>]

Description: Configure Storm Control Level (bandwidth percentage) on the Interface

Syntax:

Rate of Bandwidth in Percentage<0-100>

(Optional) Max Rate of Bandwidth in Percentage<0-100>


Command Path:

# configure [['terminal', 't']](config)# template policy-group <WORD>(config-pol-grp-if)# storm-control level <0-100> [burst-rate <0-100>]

storm-control level <0-100> [burst-rate <0-100>]


Syntax:




Command Path:

# configure [['terminal', 't']](config)# template port-channel <WORD>(config-po-ch-if)# storm-control level <0-100> [burst-rate <0-100>]



Syntax:





S Commandsstorm-control level

Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface ethernet <ifRange>(config-leaf-if)# storm-control level <0-100> [burst-rate <0-100>]



Syntax:




Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# storm-control level <0-100> [burst-rate <0-100>]



Syntax:




Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface ethernet <ifRange>(config-leaf-if)# storm-control level <0-100> [burst-rate <0-100>]



Syntax:






Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# storm-control level <0-100> [burst-rate <0-100>]



Syntax:




Command Path:

# configure [['terminal', 't']](config)# vpc context leaf <101-4000> <101-4000> [fex <fex>](config-vpc)# interface vpc <WORD> [fex <fex>](config-vpc-if)# storm-control level <0-100> [burst-rate <0-100>]



storm-control ppsstorm-control pps <arg> burst-rate <arg>

Description: Configure Storm Control in packet per second on the Interface

Syntax:

Burst Rate in packets per second. Number range from=0 to=4882812arg

Max Burst Rate in packets per secondburst-rate

Max Burst Rate in packets per second. Number range from=0to=4882812

arg


Command Path:

# configure [['terminal', 't']](config)# template policy-group <WORD>(config-pol-grp-if)# storm-control pps <> burst-rate <>

storm-control pps <arg> burst-rate <arg>


Syntax:




arg


Command Path:

# configure [['terminal', 't']](config)# template port-channel <WORD>(config-po-ch-if)# storm-control pps <> burst-rate <>



Syntax:


S Commandsstorm-control pps




arg


Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface ethernet <ifRange>(config-leaf-if)# storm-control pps <> burst-rate <>



Syntax:




arg


Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# storm-control pps <> burst-rate <>



Syntax:




arg




Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface ethernet <ifRange>(config-leaf-if)# storm-control pps <> burst-rate <>



Syntax:




arg


Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# storm-control pps <> burst-rate <>



Syntax:




arg


Command Path:

# configure [['terminal', 't']](config)# vpc context leaf <101-4000> <101-4000> [fex <fex>](config-vpc)# interface vpc <WORD> [fex <fex>](config-vpc-if)# storm-control pps <> burst-rate <>



street-addressstreet-address <WORD>

Description: Street address of the site

Syntax:

The street address (Max Size 255) surrounded by quotesWORD

Command Mode: destination-profile : Configure destination profile Parameters

Command Path:

# configure [['terminal', 't']](config)# callhome common(config-callhome)# destination-profile(config-callhome-destnprof)# street-address <WORD>


S Commandsstreet-address

subjectsubject <WORD>

Description: Set The fully qualified domain name or DN of the requesting device.

Syntax:

FQDN or DN of device (Max Size 64)<WORD>

Command Mode: csr : A csr mode to create and hold an SSL certificate

Command Path:

# configure [['terminal', 't']](config)# crypto keyring <WORD>(config-keyring)# csr(config-csr)# subject <WORD>

subject <WORD>

Description: Configuration a subject on the contract

Syntax:

Name of the contract subject (Max Size 64)WORD


Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# contract <WORD> [type <type>](config-tenant-contract)# subject <WORD>


S Commandssubject

subnetsubnet <WORD>

Description: Configure Private IP Subnet

Syntax:

WORDWORD

Command Mode: l4l7 resource-pool : Configure L4-L7 Service Resource Pool

Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# l4l7 resource-pool <WORD>(config-resource-pool)# subnet <WORD>


S Commandssubnet

summary-addresssummary-address <IP-PREFIX/LEN>

Description: Route summarization

Syntax:

Summarized ipIP-PREFIX/LEN

Command Mode: vrf : Associate Router OSPF Policy with Tenant/VRF

Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# router ospf default(config-leaf-ospf)# vrf member tenant <WORD> vrf <WORD>(config-leaf-ospf-vrf)# summary-address <IP-PREFIX/LEN>

summary-address <IP-PREFIX/LEN>

Description: Route summarization

Syntax:

Summarized ipIP-PREFIX/LEN

Command Mode: vrf : Associate Router OSPF Policy with Tenant/VRF

Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# router ospf default(config-leaf-ospf)# vrf member tenant <WORD> vrf <WORD>(config-leaf-ospf-vrf)# summary-address <IP-PREFIX/LEN>


S Commandssummary-address

svcredir-polsvcredir-pol tenant <tenant> name <WORD>

Description: Configure Service Redirection Policy for a L4-L7 Graph Connector.

Syntax:

Tenant in which the service redirection policy is availabletenant

Tenant in which the service redirection policy is available<tenant>

Service redirection policy namename

Service redirection policy name (Max Size 64)WORD

Command Mode: connector : Configure Connector for a Service Node

Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# l4l7 graph <WORD> [contract <contract-option>](config-graph)# service <WORD> [device-cluster-tenant <WORD>] [device-cluster <WORD>] [mode<Available Modes>] [svcredir <Service Redirection>] [service-type <Service Type>](config-service)# connector <WORD> [cluster-interface <WORD>](config-connector)# svcredir-pol tenant <tenant> name <WORD>

svcredir-pol <WORD>

Description: Configure L4L7 service redirection policy

Syntax:

service redirection policy name (Max Size 64)WORD

Command Mode: tenant : Tenant configuration mode

Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# svcredir-pol <WORD>


S Commandssvcredir-pol

switch-groupswitch-group <WORD>

Description: Create switch firmware upgrade policy

Syntax:


Command Mode: firmware : Firmware upgrade configuration Mode

Command Path:

# configure [['terminal', 't']](config)# firmware(config-firmware)# switch-group <WORD>


S Commandsswitch-group

switchswitch

Description: Add switches to switch group

Syntax:

arg


Command Path:

# configure [['terminal', 't']](config)# firmware(config-firmware)# switch-group <WORD>(config-firmware-switch)# switch

switch

Description: Configure Leaf Node

Syntax:

arg


Command Path:

# configure [['terminal', 't']](config)# switch

switch

Description: Add switches to zone

Syntax:

arg

Command Mode: zone : Create zone policy

Command Path:

# configure [['terminal', 't']](config)# zones(config-zones)# zone <WORD>(config-zone)# switch


S Commandsswitch

switchingswitching mode vlan|vxlan|vxlan-ns

Description: Configure switching mode.

Syntax:

switching Modemode

VLAN/SW Modevlan

VXLAN/SW Modevxlan

VXLAN/HWModevxlan-ns


Command Path:

# configure [['terminal', 't']](config)# vmware-domain <WORD> [delimiter <WORD>](config-vmware)# configure-avs(config-vmware-avs)# switching mode vlan|vxlan|vxlan-ns


S Commandsswitching

switchportswitchport

Description: Configure switchport parameters


Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface ethernet <ifRange>(config-leaf-if)# switchport

switchport



Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# switchport

switchport



Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface ethernet <ifRange>(config-leaf-if)# switchport

switchport



Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# switchport

switchport



S Commandsswitchport


Command Path:

# configure [['terminal', 't']](config)# vpc context leaf <101-4000> <101-4000> [fex <fex>](config-vpc)# interface vpc <WORD> [fex <fex>](config-vpc-if)# switchport


S Commandsswitchport

switchport access vlan tenant applicationswitchport access vlan <NUMBER> tenant <WORD> application <WORD> epg <WORD>

Description: Application Name

Syntax:



Tenant hosting the EPg (Max Size 63)WORD

Application Name (Max Size 64)WORD

EPg that uses the statically enabled Encapepg

EPg that uses the statically enabled Encap (Max Size 64)WORD


Command Path:

# configure [['terminal', 't']](config)# template policy-group <WORD>(config-pol-grp-if)# switchport access vlan <NUMBER> tenant <WORD> application <WORD> epg<WORD>

switchport access vlan <NUMBER> tenant <WORD> application <WORD> epg <WORD>


Syntax:









S Commandsswitchport access vlan tenant application

Command Path:

# configure [['terminal', 't']](config)# template port-channel <WORD>(config-po-ch-if)# switchport access vlan <NUMBER> tenant <WORD> application <WORD> epg<WORD>



Syntax:

Access Vlanvlan

Access Vlan. Number range from=1 to=4094<1-4094>

Tenant hosting the AEPgtenant

Tenant hosting the AEPg (Max Size 63)WORD





Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface ethernet <ifRange>(config-leaf-if)# switchport access vlan <NUMBER> tenant <WORD> application <WORD> epg<WORD>



Syntax:

Access Vlanvlan










Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# switchport access vlan <NUMBER> tenant <WORD> application <WORD> epg<WORD>



Syntax:

Access Vlanvlan








Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface ethernet <ifRange>(config-leaf-if)# switchport access vlan <NUMBER> tenant <WORD> application <WORD> epg<WORD>



Syntax:

Access Vlanvlan










Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# switchport access vlan <NUMBER> tenant <WORD> application <WORD> epg<WORD>



Syntax:

Access Vlanvlan








Command Path:

# configure [['terminal', 't']](config)# vpc context leaf <101-4000> <101-4000> [fex <fex>](config-vpc)# interface vpc <WORD> [fex <fex>](config-vpc-if)# switchport access vlan <NUMBER> tenant <WORD> application <WORD> epg <WORD>



switchport access vlan tenant external-sviswitchport access vlan <NUMBER> tenant <WORD> external-svi [l3out] WORD

Description: Associate SVI to the L2 Access Interface

Syntax:

Access Vlanvlan




(Optional) Specify one or more l3extOut to add SVI interfacel3out

l3extOut NameWORD


Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface ethernet <ifRange>(config-leaf-if)# switchport access vlan <NUMBER> tenant <WORD> external-svi [l3out] WORD

switchport access vlan <NUMBER> tenant <WORD> external-svi [l3out] WORD

Description: Associate SVI to Acess L2 Interface

Syntax:

Access Vlanvlan





l3extOut NameWORD



S Commandsswitchport access vlan tenant external-svi

Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# switchport access vlan <NUMBER> tenant <WORD> external-svi [l3out] WORD


Description: Associate SVI to the L2 Access Interface

Syntax:

Access Vlanvlan





l3extOut NameWORD


Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface ethernet <ifRange>(config-leaf-if)# switchport access vlan <NUMBER> tenant <WORD> external-svi [l3out] WORD



Syntax:

Access Vlanvlan





l3extOut NameWORD




Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# switchport access vlan <NUMBER> tenant <WORD> external-svi [l3out] WORD



Syntax:

Access Vlanvlan





l3extOut NameWORD


Command Path:

# configure [['terminal', 't']](config)# vpc context leaf <101-4000> <101-4000> [fex <fex>](config-vpc)# interface vpc <WORD> [fex <fex>](config-vpc-if)# switchport access vlan <NUMBER> tenant <WORD> external-svi [l3out] WORD



switchport modeswitchport mode <arg>

Description: Configure switchport mode for interface

Syntax:

arg


Command Path:

# configure [['terminal', 't']](config)# template policy-group <WORD>(config-pol-grp-if)# switchport mode <>

switchport mode <arg>

Description: Configure switchport mode for vfc interface

Syntax:

arg


Command Path:

# configure [['terminal', 't']](config)# template port-channel <WORD>(config-po-ch-if)# switchport mode <>

switchport mode dot1q-tunnel

Description: Tunnel Configuration

Syntax:

QinQ Tunnel Configurationdot1q-tunnel


Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface ethernet <ifRange>(config-leaf-if)# switchport mode dot1q-tunnel


S Commandsswitchport mode



Syntax:



Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# switchport mode dot1q-tunnel



Syntax:

arg


Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface vfc <ifRange>(config-leaf-if)# switchport mode <>



Syntax:

arg


Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface vfc-po <WORD> [fex <fex>](config-leaf-if)# switchport mode <>





Syntax:



Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface ethernet <ifRange>(config-leaf-if)# switchport mode dot1q-tunnel



Syntax:



Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# switchport mode dot1q-tunnel



Syntax:

arg


Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface vfc <ifRange>(config-leaf-if)# switchport mode <>





Syntax:

arg


Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface vfc-po <WORD> [fex <fex>](config-leaf-if)# switchport mode <>


Description: Configure switchport mode for interface

Syntax:

arg


Command Path:

# configure [['terminal', 't']](config)# vpc context leaf <101-4000> <101-4000> [fex <fex>](config-vpc)# interface vpc <WORD> [fex <fex>](config-vpc-if)# switchport mode <>



switchport port-security maximumswitchport port-security maximum <count>

Description:

Syntax:

. Number range from=0 to=12000count


Command Path:

# configure [['terminal', 't']](config)# template policy-group <WORD>(config-pol-grp-if)# switchport port-security maximum <count>

switchport port-security maximum <count>

Description:

Syntax:

. Number range from=0 to=12000count


Command Path:

# configure [['terminal', 't']](config)# template port-channel <WORD>(config-po-ch-if)# switchport port-security maximum <count>

switchport port-security maximum <arg>

Description: Port-security configuration

Syntax:

. Number range from=0 to=12000arg


Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface ethernet <ifRange>(config-leaf-if)# switchport port-security maximum <>


S Commandsswitchport port-security maximum



Syntax:



Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# switchport port-security maximum <>



Syntax:



Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface ethernet <ifRange>(config-leaf-if)# switchport port-security maximum <>



Syntax:



Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# switchport port-security maximum <>





Syntax:



Command Path:

# configure [['terminal', 't']](config)# vpc context leaf <101-4000> <101-4000> [fex <fex>](config-vpc)# interface vpc <WORD> [fex <fex>](config-vpc-if)# switchport port-security maximum <>



switchport port-security violationswitchport port-security violation protect

Description:

Syntax:

protect


Command Path:

# configure [['terminal', 't']](config)# template policy-group <WORD>(config-pol-grp-if)# switchport port-security violation protect

switchport port-security violation protect

Description:

Syntax:

protect


Command Path:

# configure [['terminal', 't']](config)# template port-channel <WORD>(config-po-ch-if)# switchport port-security violation protect



Syntax:

protect


Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface ethernet <ifRange>(config-leaf-if)# switchport port-security violation protect


S Commandsswitchport port-security violation



Syntax:

protect


Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# switchport port-security violation protect



Syntax:

protect


Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface ethernet <ifRange>(config-leaf-if)# switchport port-security violation protect



Syntax:

protect


Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# switchport port-security violation protect





Syntax:

protect


Command Path:

# configure [['terminal', 't']](config)# vpc context leaf <101-4000> <101-4000> [fex <fex>](config-vpc)# interface vpc <WORD> [fex <fex>](config-vpc-if)# switchport port-security violation protect



switchport tenantswitchport tenant <WORD> dot1q-tunnel <WORD>

Description: dot1q-tunnel Configuration

Syntax:


Add an dot1q-tunneldot1q-tunnel

Tunnel EPG name (Max Size 64)WORD


Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface ethernet <ifRange>(config-leaf-if)# switchport tenant <WORD> dot1q-tunnel <WORD>

switchport tenant <WORD> dot1q-tunnel <WORD>


Syntax:





Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# switchport tenant <WORD> dot1q-tunnel <WORD>



Syntax:



S Commandsswitchport tenant




Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface ethernet <ifRange>(config-leaf-if)# switchport tenant <WORD> dot1q-tunnel <WORD>



Syntax:





Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# switchport tenant <WORD> dot1q-tunnel <WORD>



Syntax:





Command Path:




(config)# vpc context leaf <101-4000> <101-4000> [fex <fex>](config-vpc)# interface vpc <WORD> [fex <fex>](config-vpc-if)# switchport tenant <WORD> dot1q-tunnel <WORD>



switchport trunk allowed vlan inband-mgmtswitchport trunk allowed vlan <NUMBER> inband-mgmt <A.B.C.D/LEN>

Description: Configure External L2 connectivity to inband Mnaagement

Syntax:



Gateway IP Address for External Connectivity format x.x.x.x/mA.B.C.D/LEN


Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface ethernet <ifRange>(config-leaf-if)# switchport trunk allowed vlan <NUMBER> inband-mgmt <A.B.C.D/LEN>

switchport trunk allowed vlan <NUMBER> inband-mgmt <A.B.C.D/LEN>

Description: Configure External L2 connectivity to inband Mnaagement

Syntax:



Gateway IP Address for External Connectivity format x.x.x.x/mA.B.C.D/LEN


Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface ethernet <ifRange>(config-leaf-if)# switchport trunk allowed vlan <NUMBER> inband-mgmt <A.B.C.D/LEN>


S Commandsswitchport trunk allowed vlan inband-mgmt

switchport trunk allowed vlan tenant applicationswitchport trunk allowed vlan <NUMBER> tenant <WORD> application <WORD> epg <WORD>


Syntax:








Command Path:

# configure [['terminal', 't']](config)# template policy-group <WORD>(config-pol-grp-if)# switchport trunk allowed vlan <NUMBER> tenant <WORD> application <WORD>epg <WORD>

switchport trunk allowed vlan <NUMBER> tenant <WORD> application <WORD> epg <WORD>


Syntax:









S Commandsswitchport trunk allowed vlan tenant application

Command Path:

# configure [['terminal', 't']](config)# template port-channel <WORD>(config-po-ch-if)# switchport trunk allowed vlan <NUMBER> tenant <WORD> application <WORD>epg <WORD>

switchport trunk allowed vlan <NUMBER> tenant <WORD> application <WORD> epg <WORD> [primary-vlanprimary-vlan <evlan>]

Description: Add an AEPg as static encap

Syntax:







(Optional) Vlan for egress traffic when EPG isolation is enforcedprimary-vlan <evlan>


Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface ethernet <ifRange>(config-leaf-if)# switchport trunk allowed vlan <NUMBER> tenant <WORD> application <WORD>epg <WORD> [primary-vlan primary-vlan <evlan>]



Syntax:



Tenant hosting the EPgtenant








Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# switchport trunk allowed vlan <NUMBER> tenant <WORD> application <WORD>epg <WORD>

switchport trunk allowed vlan <NUMBER> tenant <WORD> application <WORD> epg <WORD> [primary-vlanprimary-vlan <evlan>]


Syntax:







(Optional) Vlan for egress traffic when EPG isolation is enforcedprimary-vlan <evlan>


Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface ethernet <ifRange>(config-leaf-if)# switchport trunk allowed vlan <NUMBER> tenant <WORD> application <WORD>epg <WORD> [primary-vlan primary-vlan <evlan>]



Syntax:











Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# switchport trunk allowed vlan <NUMBER> tenant <WORD> application <WORD>epg <WORD>



Syntax:








Command Path:

# configure [['terminal', 't']](config)# vpc context leaf <101-4000> <101-4000> [fex <fex>](config-vpc)# interface vpc <WORD> [fex <fex>](config-vpc-if)# switchport trunk allowed vlan <NUMBER> tenant <WORD> application <WORD>epg <WORD>



switchport trunk allowed vlan tenant external-l2switchport trunk allowed vlan <NUMBER> tenant <WORD> external-l2 epg <WORD>

Description: Add a L2 external EPG on the interface

Syntax:




L2 external EPG nameepg

L2 external EPG name (Max Size 64)WORD


Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface ethernet <ifRange>(config-leaf-if)# switchport trunk allowed vlan <NUMBER> tenant <WORD> external-l2 epg<WORD>

switchport trunk allowed vlan <NUMBER> tenant <WORD> external-l2 epg <WORD>


Syntax:









S Commandsswitchport trunk allowed vlan tenant external-l2

Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# switchport trunk allowed vlan <NUMBER> tenant <WORD> external-l2 epg<WORD>



Syntax:







Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface ethernet <ifRange>(config-leaf-if)# switchport trunk allowed vlan <NUMBER> tenant <WORD> external-l2 epg<WORD>



Syntax:










Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# switchport trunk allowed vlan <NUMBER> tenant <WORD> external-l2 epg<WORD>



Syntax:







Command Path:

# configure [['terminal', 't']](config)# vpc context leaf <101-4000> <101-4000> [fex <fex>](config-vpc)# interface vpc <WORD> [fex <fex>](config-vpc-if)# switchport trunk allowed vlan <NUMBER> tenant <WORD> external-l2 epg <WORD>



switchport trunk allowed vlan tenant external-sviswitchport trunk allowed vlan <NUMBER> tenant <WORD> external-svi [l3out] WORD

Description: Associate SVI to the L2 Interface

Syntax:





l3extOut NameWORD


Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface ethernet <ifRange>(config-leaf-if)# switchport trunk allowed vlan <NUMBER> tenant <WORD> external-svi [l3out]WORD

switchport trunk allowed vlan <NUMBER> tenant <WORD> external-svi [l3out] WORD


Syntax:






l3extOut NameWORD



S Commandsswitchport trunk allowed vlan tenant external-svi

Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# switchport trunk allowed vlan <NUMBER> tenant <WORD> external-svi [l3out]WORD



Syntax:





l3extOut NameWORD


Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface ethernet <ifRange>(config-leaf-if)# switchport trunk allowed vlan <NUMBER> tenant <WORD> external-svi [l3out]WORD



Syntax:






l3extOut NameWORD




Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# switchport trunk allowed vlan <NUMBER> tenant <WORD> external-svi [l3out]WORD



Syntax:





l3extOut NameWORD


Command Path:

# configure [['terminal', 't']](config)# vpc context leaf <101-4000> <101-4000> [fex <fex>](config-vpc)# interface vpc <WORD> [fex <fex>](config-vpc-if)# switchport trunk allowed vlan <NUMBER> tenant <WORD> external-svi [l3out]WORD



switchport trunk allowed vlan tenant legacy-forwardingswitchport trunk allowed vlan <NUMBER> tenant <WORD> legacy-forwarding

Description: Add legacy forwarding on the vlan supplied

Syntax:





Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface ethernet <ifRange>(config-leaf-if)# switchport trunk allowed vlan <NUMBER> tenant <WORD> legacy-forwarding

switchport trunk allowed vlan <NUMBER> tenant <WORD> legacy-forwarding


Syntax:






Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# switchport trunk allowed vlan <NUMBER> tenant <WORD> legacy-forwarding



Syntax:


S Commandsswitchport trunk allowed vlan tenant legacy-forwarding





Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface ethernet <ifRange>(config-leaf-if)# switchport trunk allowed vlan <NUMBER> tenant <WORD> legacy-forwarding



Syntax:






Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# switchport trunk allowed vlan <NUMBER> tenant <WORD> legacy-forwarding



Syntax:







Command Path:

# configure [['terminal', 't']](config)# vpc context leaf <101-4000> <101-4000> [fex <fex>](config-vpc)# interface vpc <WORD> [fex <fex>](config-vpc-if)# switchport trunk allowed vlan <NUMBER> tenant <WORD> legacy-forwarding



switchport trunk allowed vsan tenant applicationswitchport trunk allowed vsan <vsan-id> tenant <WORD> application <WORD> epg <WORD>


Syntax:

Encapsulation vsanvsan

VSAN Id. Number range from=1 to=4093vsan-id






Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface vfc <ifRange>(config-leaf-if)# switchport trunk allowed vsan <vsan-id> tenant <WORD> application <WORD>epg <WORD>

switchport trunk allowed vsan <vsan-id> tenant <WORD> application <WORD> epg <WORD>


Syntax:









S Commandsswitchport trunk allowed vsan tenant application

Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface vfc-po <WORD> [fex <fex>](config-leaf-if)# switchport trunk allowed vsan <vsan-id> tenant <WORD> application <WORD>epg <WORD>



Syntax:








Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface vfc <ifRange>(config-leaf-if)# switchport trunk allowed vsan <vsan-id> tenant <WORD> application <WORD>epg <WORD>



Syntax:










Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface vfc-po <WORD> [fex <fex>](config-leaf-if)# switchport trunk allowed vsan <vsan-id> tenant <WORD> application <WORD>epg <WORD>



switchport trunk native vlan tenant applicationswitchport trunk native vlan <NUMBER> tenant <WORD> application <WORD> epg <WORD>


Syntax:








Command Path:

# configure [['terminal', 't']](config)# template policy-group <WORD>(config-pol-grp-if)# switchport trunk native vlan <NUMBER> tenant <WORD> application <WORD>epg <WORD>

switchport trunk native vlan <NUMBER> tenant <WORD> application <WORD> epg <WORD>


Syntax:









S Commandsswitchport trunk native vlan tenant application

Command Path:

# configure [['terminal', 't']](config)# template port-channel <WORD>(config-po-ch-if)# switchport trunk native vlan <NUMBER> tenant <WORD> application <WORD>epg <WORD>


Description: Application hosting the AEPg

Syntax:

Native Vlanvlan

Native Vlan. Number range from=1 to=4094<1-4094>







Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface ethernet <ifRange>(config-leaf-if)# switchport trunk native vlan <NUMBER> tenant <WORD> application <WORD>epg <WORD>



Syntax:

Native Vlanvlan










Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# switchport trunk native vlan <NUMBER> tenant <WORD> application <WORD>epg <WORD>



Syntax:

Native Vlanvlan








Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface ethernet <ifRange>(config-leaf-if)# switchport trunk native vlan <NUMBER> tenant <WORD> application <WORD>epg <WORD>



Syntax:

Native Vlanvlan










Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# switchport trunk native vlan <NUMBER> tenant <WORD> application <WORD>epg <WORD>



Syntax:

Native Vlanvlan








Command Path:

# configure [['terminal', 't']](config)# vpc context leaf <101-4000> <101-4000> [fex <fex>](config-vpc)# interface vpc <WORD> [fex <fex>](config-vpc-if)# switchport trunk native vlan <NUMBER> tenant <WORD> application <WORD> epg<WORD>



switchport trunk native vlan tenant external-sviswitchport trunk native vlan <NUMBER> tenant <WORD> external-svi [l3out] WORD

Description: Associate SVI to the L2 Trunk Interface

Syntax:

Native Vlanvlan





l3extOut NameWORD


Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface ethernet <ifRange>(config-leaf-if)# switchport trunk native vlan <NUMBER> tenant <WORD> external-svi [l3out]WORD

switchport trunk native vlan <NUMBER> tenant <WORD> external-svi [l3out] WORD

Description: Associate Native Vlan to the L2 Trunk Interface as external SVI

Syntax:

Native Vlanvlan





l3extOut NameWORD



S Commandsswitchport trunk native vlan tenant external-svi

Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# switchport trunk native vlan <NUMBER> tenant <WORD> external-svi [l3out]WORD


Description: Associate SVI to the L2 Trunk Interface

Syntax:

Native Vlanvlan





l3extOut NameWORD


Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface ethernet <ifRange>(config-leaf-if)# switchport trunk native vlan <NUMBER> tenant <WORD> external-svi [l3out]WORD


Description: Associate Native Vlan to the L2 Trunk Interface as external SVI

Syntax:

Native Vlanvlan





l3extOut NameWORD




Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# switchport trunk native vlan <NUMBER> tenant <WORD> external-svi [l3out]WORD


Description: Associate SVI to Trunk L2 Interface

Syntax:

Native Vlanvlan





l3extOut NameWORD


Command Path:

# configure [['terminal', 't']](config)# vpc context leaf <101-4000> <101-4000> [fex <fex>](config-vpc)# interface vpc <WORD> [fex <fex>](config-vpc-if)# switchport trunk native vlan <NUMBER> tenant <WORD> external-svi [l3out]WORD



switchport vlanswitchport vlan scope local

Description: Switchport vlan configuration

Syntax:

scope

Local Scopelocal


Command Path:

# configure [['terminal', 't']](config)# template policy-group <WORD>(config-pol-grp-if)# switchport vlan scope local

switchport vlan scope local

Description:

Syntax:

scope

Local Scopelocal


Command Path:

# configure [['terminal', 't']](config)# template port-channel <WORD>(config-po-ch-if)# switchport vlan scope local


Description: L2 configuration

Syntax:

scope

Local Scopelocal



S Commandsswitchport vlan

Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface ethernet <ifRange>(config-leaf-if)# switchport vlan scope local


Description:

Syntax:

scope

Local Scopelocal


Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# switchport vlan scope local


Description: L2 configuration

Syntax:

scope

Local Scopelocal


Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface ethernet <ifRange>(config-leaf-if)# switchport vlan scope local


Description:

Syntax:

scope



Local Scopelocal


Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# switchport vlan scope local


Description:

Syntax:

scope

Local Scopelocal


Command Path:

# configure [['terminal', 't']](config)# vpc context leaf <101-4000> <101-4000> [fex <fex>](config-vpc)# interface vpc <WORD> [fex <fex>](config-vpc-if)# switchport vlan scope local



switchport vsanswitchport vsan <vsan-id> tenant <WORD> application <WORD> epg <WORD>

Description: Encapsulation vsan

Syntax:


Tenant Nametenant


Application Nameapplication





Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface vfc <ifRange>(config-leaf-if)# switchport vsan <vsan-id> tenant <WORD> application <WORD> epg <WORD>

switchport vsan <vsan-id> tenant <WORD> application <WORD> epg <WORD>


Syntax:


Tenant Nametenant







S Commandsswitchport vsan


Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface vfc-po <WORD> [fex <fex>](config-leaf-if)# switchport vsan <vsan-id> tenant <WORD> application <WORD> epg <WORD>



Syntax:


Tenant Nametenant







Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface vfc <ifRange>(config-leaf-if)# switchport vsan <vsan-id> tenant <WORD> application <WORD> epg <WORD>



Syntax:


Tenant Nametenant









Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface vfc-po <WORD> [fex <fex>](config-leaf-if)# switchport vsan <vsan-id> tenant <WORD> application <WORD> epg <WORD>



switchport vsan tenant applicationswitchport vsan <NUMBER> tenant <WORD> application <WORD> epg <WORD>


Syntax:

Access Vsan. Number range from=1 to=4094<1-4094>







Command Path:

# configure [['terminal', 't']](config)# vpc context leaf <101-4000> <101-4000> [fex <fex>](config-vpc)# interface vpc <WORD> [fex <fex>](config-vpc-if)# switchport vsan <NUMBER> tenant <WORD> application <WORD> epg <WORD>


S Commandsswitchport vsan tenant application

syslogsyslog common

Description: Syslog common policy configuration mode

Syntax:

Syslog common policy configuration modecommon


Command Path:

# configure [['terminal', 't']](config)# syslog common


S Commandssyslog

system cluster-sizesystem cluster-size <NUMBER>

Description: Set APIC cluster size

Syntax:

size of the cluster to be set. Number range from=1 to=16<size>


Command Path:

# configure [['terminal', 't']](config)# system cluster-size <NUMBER>


S Commandssystem cluster-size

system controller-idsystem controller-id <serial-number> approve|reject

Description: Configure Controller Id for controllers in fabric

Syntax:

Controller serial numberserial-number

Approve controllerapprove

Reject controllerreject


Command Path:

# configure [['terminal', 't']](config)# system controller-id <serial-number> approve|reject


S Commandssystem controller-id

system dynamic-load-balancesystem dynamic-load-balance modelink-failure-resiliency|dynamic-aggressive|dynamic-conservative|packet-prioritization

Description: Configure dynamic load balancer

Syntax:

Dynamic load balancer modemode

Link failure resiliency modelink-failure-resiliency

Aggressive dynamic modedynamic-aggressive

Conservative dynamic modedynamic-conservative

Packet prioritization modepacket-prioritization


Command Path:

# configure [['terminal', 't']](config)# system dynamic-load-balance modelink-failure-resiliency|dynamic-aggressive|dynamic-conservative|packet-prioritization


S Commandssystem dynamic-load-balance

system fabric-security-modesystem fabric-security-mode <mode>

Description: Set strict/permissive mode for ACI Fabric Internode Authentication

Syntax:

Security mode as comma separated values like val1,val2,..valN<mode>


Command Path:

# configure [['terminal', 't']](config)# system fabric-security-mode <mode>


S Commandssystem fabric-security-mode

system jumbomtusystem jumbomtu <NUMBER>

Description:MTU size for Host Facing ports

Syntax:

Enter jumbomtu. Number range from=576 to=9000<576-9000>


Command Path:

# configure [['terminal', 't']](config)# system jumbomtu <NUMBER>


S Commandssystem jumbomtu

system podsystem pod <NUMBER> tep-pool <A.B.C.D/LEN>

Description: POD in the fabric

Syntax:

POD ID. Number range from=1 to=255<1-255>

Tunnel Endpoint IP Address Pooltep-pool

Unicast IP prefix and network mask length in format x.x.x.x/mA.B.C.D/LEN


Command Path:

# configure [['terminal', 't']](config)# system pod <NUMBER> tep-pool <A.B.C.D/LEN>


S Commandssystem pod

system switch-idsystem switch-id <serial-number> <node-Id> <WORD> [pod <arg>] [role <arg>]

Description: Configure Node Id for switches in fabric

Syntax:

Switch serial number<serial-number>

Switch ID. Number range from=101 to=4000node-Id

Switch nameWORD

(Optional) Pod Id of the the node. Default value is 1. Number rangefrom=1 to=9

arg

(Optional) Type of Node - leaf or spine. Default is unspecifiedarg


Command Path:

# configure [['terminal', 't']](config)# system switch-id <serial-number> <node-Id> <WORD> [pod <>] [role <>]


S Commandssystem switch-id

system use-infra-giposystem use-infra-gipo enable

Description:Multicast Group IP Policy Mode for Tunnel Outer Header

Syntax:

Multicast Group IP Policy Mode for Tunnel Outer Headerenable


Command Path:

# configure [['terminal', 't']](config)# system use-infra-gipo enable


S Commandssystem use-infra-gipo

S Commands · • showinterfacebridge-domaindetail, page 522 • showipinterfacebridge-domain, page 523 Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 14 S Commands

Documents