Top Banner
BATCH MEMBERS N.AKILANDESWARI V.AKILANDESWARI A.EDWARD LIVINGSTON 011104050 02 011104050 03 011104050 16 UNDER THE GUIDELINES OF Mr. S. SURESH M.E., Visiting Faculty BHARATHIDASAN INSTITUTE OF TECHNOLOGY, ANNA UNIVERSITY, TIRUCHIRAPPALLI – 24. DEPARTMENT OF CIVIL ENGINEERING USTAINABILITY IN GEOPOLYME
16

Rvu_1

Nov 01, 2014

Download

Documents

anmansari

Civil Engineering Seminar Presentation
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1: Rvu_1

BATCH MEMBERS

N.AKILANDESWARIV.AKILANDESWARIA.EDWARD LIVINGSTON

01110405002 0111040500301110405016

UNDER THE GUIDELINES OF Mr. S. SURESH M.E.,Visiting Faculty

BHARATHIDASAN INSTITUTE OF TECHNOLOGY,

ANNA UNIVERSITY, TIRUCHIRAPPALLI – 24.DEPARTMENT OF CIVIL ENGINEERING

SUSTAINABILITY IN GEOPOLYMER

Page 2: Rvu_1

OBJECTIVEStudy & evaluation of chemical composition &

effects of NaOH & sodium silicate on fly ash.

Study of polymerization process in Fly ash, NaOH & sodium silicate of the composition that is geopolymer.

To increase the strength of Geopolymer concrete

To make sustainability

Page 3: Rvu_1

GENERAL OUTLINE OF THIS PROJECTIntroductionLiterature ReviewMethodology

Material CollectionMaterial TestingExperimental Work

Mix Design Casting of Concrete

Testing of ConcreteResultsScope of the FutureReferences

Page 4: Rvu_1

INTRODUCTIONGeopolymers are

cementitious materials that do not require the presence of OPC to harden or gain strength.

Geopolymers are formed by a 3D network of Si & Al mineral molecules linked through covalent bonds with oxygen molecules.

A positive ion must be provided to allow aluminum to become tetravalent.

Page 5: Rvu_1

INTRODUCTIONThe source of Si & Al for

geopolymers can be any mineral (e.g. metakaolin) or by-product (e.g. fly ash)

The positive ion is usually provided by a hydroxide solution of Na or K, etc.

Water glass provides the monomers from which the polymeric chains grow.

In most cases a slightly elevated temperature is required to kick start the geopolymerization reaction

Page 6: Rvu_1

How to make geopolymers?

Geopolymer can be used to replace Ordinary Portland Cement

Page 7: Rvu_1

SUSTAINABILITYActual production of Ordinary Portland

cement contributes 13.5 billion tons of CO2 per year. Approximately 5% of the total global emission of CO2 to the atmosphere.

Geopolymer made out of waste materials like fly ash, bottom ash and not only have a smaller footprint but help to reduce the footprint of other industries namely, coal-fired power plants.

Page 8: Rvu_1

Limited literatures on the rheological behaviour of slag based geopolymer mortar and fly ash based geopolymer paste are only available.

No information is available on the rheological behaviour of fly ash geopolymer concrete.

An attempt has made to study the rheological behaviour of fly ash based geopolymer concrete with a rate controlled concrete rheometer.

Rheological parameters in terms of yield stress and plastic viscosity can be estimated from the down curve of torque-speed plot (Rajan Bhattacharjee, et.al.,2010).

Literature Review

Page 9: Rvu_1

The strength of fly ash geopolymer concrete was improved to a certain extent by decreasing the water/solids ratio, the aggregate/solids ratio, and the alkaline to fly ash ratio. Aggregate grading showed a marginal influence in the strength development of fly ash geopolymer concrete. (Monita Olivia, et.al.,2011)

Literature Review

Page 10: Rvu_1

Fly ash-based geopolymer is better than normal concrete in many aspects such as compressive strength, exposure to aggressive environment, workability and exposure to high temperature.(Mohd Mustafa Al Bakri, et.al., 2010)

Literature Review

Page 11: Rvu_1

The mechanism of activation of a fly ash (no other solid material was used) with highly alkaline solutions is described.

The result showed that the geopolymer paste with NaOH concentration, compressive strength increase with molarities increases. (Prof.M.A.Bhosale, et.al., 2012)

Literature Review

Page 12: Rvu_1

MATERIALS COLLECTEDSodium hydroxide (98% purity in pure form) Sodium silicate solutions Coarse Aggregate

Page 13: Rvu_1

MATERIALS TO BE COLLECTEDFly ash Bottom ashEngineered Crushed Stone Sand

Page 14: Rvu_1

ANALYSIS AND TESTING

XRF AnalysisSieve AnalysisSlump TestCompression Test

Page 15: Rvu_1

REFERENCESRajan Bhattacharjee ,Rajan Bhattacharjee Aminul Islam Laskar. Review on

RHEOLOGICAL BEHAVIOR OF FLY ASH BASED GEOPOLYMER CONCRETE, 2010. National Institute of Technology, Silchar, India

Monita Olivia, Hamid R. Nikraz. Review on Strength and water penetrability of Fly ash Geopolymer concrete, 2011. Australia.

Mohd Mustafa Al Bakri, H. Mohammed, H. Kamarudin, I. Khairul Niza And Y. Zarina. 2010. Review On Fly Ash-Based Geopolymer Concrete Without Portland Cement.

Geopolymer Concrete by Using Fly Ash in Construction (By Prof.M.A.Bhosale, Prof.N.N.Shinde)

Page 16: Rvu_1