*Xylol - wet or dry paint. Mineral spirits - wet paint. 1 Product Spray - Top Coats Spray - Satin Spray - Hammered Spray - Metallic Spray - Primer Size 12 oz. 12 oz. 12 oz. 11 oz. 12 oz. Resin Type Modified Alkyd Modified Alkyd Modified Alkyd Modified Alkyd Modified Alkyd Surface Type Wood, metal, plastic, masonry, vinyl, fiberglass, glass and wicker Wood, metal, plastic, masonry, vinyl, fiberglass, glass and wicker Wood, metal, plastic, masonry, vinyl, fiberglass, glass and wicker Wood, metal, plastic, masonry, vinyl, fiberglass, glass and wicker Wood, metal, plastic, masonry, vinyl, fiberglass, glass and wicker Surface Restrictions Not recommended for styrofoam, galvanized metal or surfaces that will exceed 200° F Not recommended for styrofoam, galvanized metal or surfaces that will exceed 200° F Not recommended for styrofoam, galvanized metal or surfaces that will exceed 200° F Not recommended for styrofoam, galvanized metal or surfaces that will exceed 200° F Not recommended for styrofoam, galvanized metal or surfaces that will exceed 200° F Indoor Yes Yes Yes Yes Yes Outdoor Yes Yes Yes Yes Yes Gloss Level Gloss/Flat Satin Gloss Gloss Flat Durability Superior Superior Superior Superior Superior Corrosion Resistance Superior Superior Superior Superior Superior Chemical Resistance Excellent Excellent Excellent Excellent Excellent Dries to Touch 30 min. 30 min. 30 min. 30 min. 30 min. Dries to Handle 1 hr. 1 hr. 1 hr. 1 hr. 1 hr. Recoat Window Within 1 hr. or after 24 hrs. Within 1 hr. or after 24 hrs. Within 1 hr. or after 24 hrs. Within 1 hr. or after 24 hrs. Within 1 hr. or after 24 hrs. Strengths Outstanding durability and weathering with excellent adhesion to multiple surfaces. Outstanding durability and weathering with excellent adhesion to multiple surfaces. Outstanding durability and weathering with excellent adhesion to multiple surfaces. Outstanding durability and weathering with excellent adhesion to multiple surfaces. Blocks stains and fills in irregularities. Outstanding durability and weathering with excellent adhesion to multiple surfaces. Top coat with any paint. Application Tips Shake can often during use. Hold can 8-12" from the surface and spray in a steady back-and-forth motion, slightly overlapping each stroke. Shake can often during use. Hold can 8-12" from the surface and spray in a steady back-and-forth motion, slightly overlapping each stroke. Shake can often during use. Hold can 8-12" from the surface and spray in a steady back-and-forth motion, slightly overlapping each stroke. Shake can often during use. Hold can 8-12" from the surface and spray in a steady back-and-forth motion, slightly overlapping each stroke. Shake can often during use. Hold can 8-12" from the surface and spray in a steady back-and-forth motion, slightly overlapping each stroke. Clean-up* Xylol or Mineral Spirits Xylol or Mineral Spirits Xylol or Mineral Spirits Xylol or Mineral Spirits Xylol or Mineral Spirits RUST-OLEUM ® UNIVERSAL RUST-OLEUM ® PRODUCT REFERENCE GUIDE 2009 Rust-Oleum ® Universal 1 Rust-Oleum ® Stops Rust ® 2 Rust-Oleum ® Professional 5 Rust-Oleum ® Painter’s Touch ® 7 Rust-Oleum ® Aqua ® 9 Rust-Oleum ® American Accents ® 9 Rust-Oleum ® Specialty 13 EPOXYShield ® 19 Rust-Oleum ® Branded 23 Rust-Oleum ® Automotive 28 Rust-Oleum ® Marine Coatings 34 Rust-Oleum ® Road Warrior ® 34 Surface Preparation 35 Coverage 35 Glossary 36
37
Embed
RUST-OLEUM PROdUcT REfERENcE GUIdE 2009 *Xylol - wet or dry paint. Mineral spirits - wet paint. Product Spray - Top Coats Brush - Top Coats Clear Bright Coat Spray - Satin Brush -
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
*Xylol - wet or dry paint. Mineral spirits - wet paint.1
Product
Spray - Top Coats
Spray - Satin
Spray - Hammered
Spray - Metallic
Spray - Primer
Size
12 oz.
12 oz.
12 oz.
11 oz.
12 oz.
Resin Type
Modified Alkyd
Modified Alkyd
Modified Alkyd
Modified Alkyd
Modified Alkyd
Surface Type
Wood, metal, plastic, masonry, vinyl, fiberglass, glass and wicker
Wood, metal, plastic, masonry, vinyl, fiberglass, glass and wicker
Wood, metal, plastic, masonry, vinyl, fiberglass, glass and wicker
Wood, metal, plastic, masonry, vinyl, fiberglass, glass and wicker
Wood, metal, plastic, masonry, vinyl, fiberglass, glass and wicker
SurfaceRestrictions
Not recommended for styrofoam,
galvanized metal or surfaces that will exceed 200° F
Not recommended for styrofoam,
galvanized metal or surfaces that will exceed 200° F
Not recommended for styrofoam,
galvanized metal or surfaces that will exceed 200° F
Not recommended for styrofoam,
galvanized metal or surfaces that will exceed 200° F
Not recommended for styrofoam,
galvanized metal or surfaces that will exceed 200° F
Indoor
Yes
Yes
Yes
Yes
Yes
Outdoor
Yes
Yes
Yes
Yes
Yes
GlossLevel
Gloss/Flat
Satin
Gloss
Gloss
Flat
Durability
Superior
Superior
Superior
Superior
Superior
CorrosionResistance
Superior
Superior
Superior
Superior
Superior
ChemicalResistance
Excellent
Excellent
Excellent
Excellent
Excellent
Dries toTouch
30 min.
30 min.
30 min.
30 min.
30 min.
Dries toHandle
1 hr.
1 hr.
1 hr.
1 hr.
1 hr.
Recoat Window
Within 1 hr. or after 24 hrs.
Within 1 hr. or after 24 hrs.
Within 1 hr. or after 24 hrs.
Within 1 hr. or after 24 hrs.
Within 1 hr. or after 24 hrs.
Strengths
Outstanding durability and weathering with excellent adhesion to
multiple surfaces.
Outstanding durability and weathering with excellent adhesion to
multiple surfaces.
Outstanding durability and weathering with excellent adhesion to
multiple surfaces.
Outstanding durability and weathering with excellent adhesion to
multiple surfaces.
Blocks stains and fills in irregularities. Outstanding durability and weathering with excellent adhesion to multiple surfaces. Top coat
with any paint.
Application Tips
Shake can often during use. Hold can 8-12" from the surface and spray in a
*Xylol - wet or dry paint. Mineral spirits - wet paint.2
Product
Spray - Top Coats
Brush - Top Coats
Clear
Bright Coat
Spray - Satin
Brush - Satin
Spray - Hammered
Brush - Hammered
Size
12 oz.
Half-pints& Quarts
12 oz.
11 oz.
12 oz.
Quarts
12 oz.
Quarts & Gallons
Resin Type
Standard Alkyd (Oil-Based)
Standard Alkyd (Oil-Based)
Acrylic Lacquer
Solvent Acrylic
Standard Alkyd (Oil-Based)
Standard Alkyd (Oil-Based)
Modified Alkyd (Oil-Based)
Modified Alkyd (Oil-Based)
Surface Type
Metal, wood, concrete and
masonry
Metal, wood, concrete and
masonry
Metal, wood, concrete and
masonry
Metal, wood, concrete and
masonry
Metal, wood, concrete and
masonry
Metal, wood, concrete and
masonry
Metal, wood, concrete and
masonry
Metal, wood, concrete and
masonry
SurfaceRestrictions
Galvanized metal, glass and some
plastics or surfaces that exceed 200° F
Galvanized metal, glass and some
plastics or surfaces that exceed 200° F
Styrofoam and some plastics or
surfaces that exceed 200° F
Styrofoam and some plastics or
surfaces that exceed 200° F
Galvanized metal, glass and some
plastics or surfaces that exceed 200° F
Galvanized metal, glass and some
plastics or surfaces that exceed 200° F
Galvanized metal, glass and some
plastics or surfaces that exceed 200° F
Galvanized metal, glass and some
plastics or surfaces that exceed 200° F
Indoor
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Outdoor
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Gloss Level
Gloss,Semi-Gloss, Brown, Flat in Black &
White
Gloss,Semi-Gloss, Flat in Black
& White
Gloss
Gloss
Satin
Satin
Gloss
Gloss
Durability
Excellent
Excellent
Excellent
Fair
Excellent
Excellent
Very good
Excellent
Corrosion Resistance
Excellent
Excellent
Good
Fair
Excellent
Excellent
Excellentw/ 2 coats
Excellentw/ 2 coats
ChemicalResistance
Very Good
Very Good
Dissolves in any strong
solvent
Dissolves in any strong
solvent
Very good
Very good
Very good
Very good
Dries toTouch
2 - 4 hrs.
2 - 4 hrs.
15 min.
1 hr.
2 - 4 hrs.
1 - 3 hrs
15 min.
30 min.
Dries to Handle
5 - 9 hrs.
4 - 7 hrs.
30 min.
1 hr.
5 - 9 hrs.
3 - 6 hrs.
90 min.
60 - 90 min.
RecoatWindow
Within 1 hr. or after 48 hrs.
After 24 hrs.
Anytime over itself or followrecoat timingof base coat.
Within 1 hr. or after 48 hrs.
Within 1 hr. or after 48 hrs.
After 24 hrs.
Within 2 hrs. or after48 hrs.
Apply 2nd coat after
30 mins. to4 hrs. or
after 7 days.
Strengths
#1 rust preventive paint. Superior coverage, chip
resistance andcolor retention.
#1 rust preventive paint. Superior coverage, chip
resistance andcolor retention.
Crystal clear,non-yellowing formula.
Fast dry.
Bright, shiny finish.Fast dry.
Low-sheen, satin finish. Durable for outdoor
applications.Nature-inspired colors.
Low-sheen, satin finish. Durable for outdoor
applications.Nature-inspired colors.
Hides flaws andimperfections
in scratched, rusted and pitted metals.
Hides flaws and imperfections
in scratched, rusted and pitted metals.
Application Tips
Use 8781 Aluminum Primer on hard to coat surfaces and galvanized metal.
Use 8781 Aluminum Primer on hard to coat surfaces and galvanized metal.
If top coating overanother paint, follow
recoat instructions of the product you are top
coating. Test first in an inconspicuous area.
Metallic finish may rub off and tarnish.
Use 8781 Aluminum Primer on hard to coat surfaces and galvanized metal.
Use 8781 Aluminum Primer on hard to coat surfaces and galvanized metal.
Can be applied directly overrust -no priming needed. Two coats are necessary.
Can be applied directly over rust - no priming needed. Two coats are necessary.
Clean-up*
Xylol or Mineral Spirits
Xylol or Mineral Spirits
Xylol or Mineral Spirits
Xylol or Mineral Spirits
Xylol or Mineral Spirits
Xylol or Mineral Spirits
Xylol or Mineral Spirits
Xylol or Mineral Spirits
R U S T - O L E U M® S T O P S R U S T®
*Xylol - wet or dry paint. Mineral spirits - wet paint.3
Product
Spray - Textured
Spray - Multi- Color Textured
Spray - Metallics
Spray - Clean Metal Primer
Brush - Clean Metal Primer
Brush - FlatAluminum Primer
Spray - Rusty Metal Primer
Size
12 oz.
12 oz.
11 oz.
12 oz.
Half-pint& Quart
Quart
12 oz.
Resin Type
Chain-StoppedAlkyd
(Oil-Based)
Modified Alkyd
Acrylic Lacquers(Oil-Based)
Modified Alkyd (Oil-Based)
Modified Alkyd(Oil-Based)
Acrylic
Fish-Oil Modified Alkyd
Surface Type
Metal, wood, concrete and
masonry
Metal, wood,Masonry
Metal, wood, concrete and
masonry
Bare, painted or lightly rusted
metal
Bare, painted orlightly rusted
metal
Aluminum
Heavily rusted metal
SurfaceRestrictions
Galvanized metal, glass, ceramic and some plastics or
surfaces thatexceed 200° F
Galvanized metal, glass, ceramic and some plastics or
surfaces thatexceed 200° F
Galvanized metal, glass, ceramic and some plastics or
surfaces thatexceed 200° F
Galvanized metal, glass, ceramic and some plastics or
surfaces thatexceed 200° F
Galvanized metal,glass, ceramic and
some plastics or surfaces thatexceed 200° F
Plastics have not been tested. Follow proper preparation instructions listed
on the label orsurfaces that
exceed 200° F
Galvanized metal, glass, ceramic and some plastics or
surfaces thatexceed 200° F
Indoor
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Outdoor
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Gloss Level
Satin
Gloss
Gloss/Matte
Flat
Flat
Flat
Flat
Durability
Excellent
Excellent
Excellent
Excellent
Excellent
Good
Excellent
Corrosion Resistance
Excellent
Excellent
Excellent
Excellent
Excellent
Good
Excellent
ChemicalResistance
Very Good
Very Good
Very good
Very good when top coated
Very good when top coated
This is not usually tested
on primersfor consumer applications. The primeris usuallytopcoated.
Very good when top coated
Dries toTouch
15 min.
30 min.
10 min.
15 min.
2 - 4 hrs.
1-2 hrs. @ 70F/ 50%
RH
15 min.
Dries to Handle
1 - 2 hrs.
1 - 2 hrs.
30 min.
15 - 30 min.
4 - 7 hrs.
2-4 hrs. @ 70F / 50%
RH
15 - 30 min.
RecoatWindow
Within 1 hr. or after 48 hrs.
Within 1 hr. or after 48 hrs.
Anytime
Within 1 hr. or after 48 hrs.
After 24 hrs.
If finish coat is a brush-on latex enamel
allow to dry for at least 1-2 hours. If
finish coat is a brush-on oil based enamel allow to dry
for at least 24 hours. If finish coat is an aero-sol allow to dry for at least 16-24 hours.
Within 1 hr. or after 48 hrs.
Strengths
Excellent rustprotection.
Durable, fine textured finish. Fast dry.
Achieves amulti-color textured finish from one can.
Excellent rustprotection.
Brilliant metallicfinish. Outdoor
durability.
Provides superioradhesion. Top coat in
minutes. Fast dry.
Prevents chipping, cracking and peeling.
Provides superioradhesion.
Improves adhesionof topcoats toaluminum and
galvanized surfaces.
Apply directly over rust. Fast dry.
Provides superiorcorrosion resistance.
Application Tips
Use 8781 Aluminum Primer on hard to coat surfaces and galvanized metal.
Use a base coat ofa similar color toincrease hidingand coverage.
Use 8781 Aluminum Primer on hard to coat surfaces and galvanized metal.
Can be used as an intermediate coat over
Rusty Metal Primer.May be used on lightly
rusted metal.
Top coat when fullydry - usually 24 hrs.
Thin only withmineral spirits.
Avoid excessive brushing as this will reduce film
thickness and protection. Use light, even brush
strokes to ensure proper coverage and the smooth-est finish. If using a roller, cover approximately 1 sq.
yd. at a time.
Use only on rusted metal. Spray in a steady
back-and-forth motion, slightly overlapping each stroke. Apply two or more light coats a few minutes apart. Test topcoats in an inconspicuous area first.
Clean-up*
Xylol or Mineral Spirits
Xylol orMineral Spirits
Xylol or Mineral Spirits
Xylol or Mineral Spirits
Xylol or Mineral Spirits
Water
Xylol or Mineral Spirits
R U S T - O L E U M® S T O P S R U S T®
*Xylol - wet or dry paint. Mineral spirits - wet paint.4
Product
Brush - Rusty Metal Primer
Rusty Metal Primer Touch-up
GalvanizingCompound
Auto Primer
Chain Link Fence
Spray -Rust Reformer
Brush -Rust Reformer
Brush -Rust Stripper
Size
Half-pint & Quart
.45 oz.
16 oz.
12 oz.
Gallon
10.25 oz.
8 oz.
8 oz.
Resin Type
Fish-Oil Modified Alkyd
Fish-Oil Alkyd
Epoxy Ester& Zinc
Modified Alkyd(Oil-Based)
Hydrocarbon Modified Alkyd
Chain Stopped Alkyd
(Oil-Based)
Vinyl Copolymer
N/A
Surface Type
Heavily rusted metal
Rusted metal
Galvanized and sheet metal
Metal
Metal
Metal, wood, concrete and
masonry
Rusty metal
Rusty metal
SurfaceRestrictions
Galvanized metal, glass, ceramic and some plastics or
surfaces thatexceed 200° F
Galvanized metal orsurfaces that
exceed 200° F
Only for cleancorrosion-free metal
or surfaces thatexceed 200° F
Galvanized metal, glass and some
plastics orsurfaces that
exceed 200° F
Glass, someplastics andsurfaces that
exceed 200° F
Galvanized metal, glass, and some
plastics orsurfaces that
exceed 200° F
For use over rusty metal surfaces only
Aluminum, chrome or galvanized metal
Indoor
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Outdoor
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Gloss Level
Flat
Flat
Flat
Flat
Gloss
Flat
Satin
N/A
Durability
Excellent
Excellent
Excellent
Excellent
Excellent
Excellent
N/A
N/A
Corrosion Resistance
Excellent
Excellent
Excellent
Excellent
Excellent
Excellent
Excellent
N/A
ChemicalResistance
Very good when
top coated
Very good when top coated
Good ingeneral, poor
to acids
Very good when top coated
Very good
Very good
N/A
N/A
Dries toTouch
2 - 4 hrs.
1 - 2 hrs.
30 min.
15 min.
2 - 4 hrs.
15 min.
20 - 40 min.
N/A
Dries to Handle
5 - 9 hrs.
2 hrs
1 - 2 hrs.
15 - 30 min.
5 - 9 hrs.
2 hrs.
1 hr.
N/A
Application Tips
Top coat when fullydry - usually 24 hrs.
Thin only with mineral spirits. Use on rusted
metal only.
For deep scratchesor chips apply
several coats a fewminutes apart.
Do not prime first.Do not use over previously painted or rusted metal.Apply two or more light
coats a few minutes apart. Test topcoats in an
inconspicuous area first.
Test topcoats in an inconspicuous area first.
Use thick nap roller for chain link fences.
Apply several light coats a few minutes apart to prevent running
and sagging.
Allow surfaces to dry 4 hrs. for alkyd, 3 days for lacquer or aerosol. Do nottop coat with latex paints.
Prime or paint surfaceswithin 24 hrs. of use. If not
painting or priming, top with Rust Inhibitor. Must use
gloves and eye protection when applying this product.
Clean-up*
Xylol or Mineral Spirits
Mineral Spirits
Xylol or Mineral Spirits
Xylol or Mineral Spirits
Xylol or Mineral Spirits
Xylol or Mineral Spirits
Water
Soap & Water
R U S T - O L E U M® S T O P S R U S T®
Strengths
Prevents chipping, cracking and peeling.
Provides superioradhesion and
rust protection.
Directly prime specific areas that are rusted. Brush in cap makes it
quick and easy.
93% pure zinc in final film. No top coat needed. Fast dry.
Compatible with most automotive touch-up paints. Wet sandable.
Fast dry.
Outstanding chipresistance, color
retention and hiding.
Can be topcoated with virtually any paint.
Excellent adhesion to rusty metal. Chemically
converts rust to apaintable finish.
Creates a smooth paintable surface.
RecoatWindow
After 24 hrs.
24 hrs.
Within 1 hr., after 24 hrs.
Anytime once dry
After 24 hrs.
After 24 hrs.
4 hrs. for alkyd, 3 days for lacquer or
aerosol
N/A
*Xylol - wet or dry paint. Mineral spirits - wet paint.5
R U S T - O L E U M® S T O P S R U S T®
Product
Touch-Up
Spray Tips
Spray -Rust Inhibitor
Rust Releaser
Door Paint
Size
.45 oz.
4 spray tips
10.25 oz.
0.5 oz.
Quart
Resin Type
Modified Alkyd(Oil-Based)
N/A
Drying Oil
Oil
Alkyd
Surface Type
Metal, wood, concrete and
masonry.
N/A
Metal, wood, masonry
Rusty bolts
Metal,Fiberglass,
Wood
SurfaceRestrictions
Galvanized metal, some plastics
or surfaces thatexceed 200° F
N/A
Any non metal orsurfaces that
exceed 200° F
N/A
Polyethylene, Poly-propylene orsurfaces that
exceed 200° F
Indoor
Yes
N/A
Yes
Yes
Yes
Outdoor
Yes
N/A
Yes
Yes
Yes
Gloss Level
Gloss
N/A
N/A
N/A
Semi-Gloss
Durability
Excellent
N/A
Good
N/A
Good
Corrosion Resistance
Excellent
N/A
Very good
N/A
Good
ChemicalResistance
Very good
N/A
N/A
N/A
Good
Dries toTouch
1 - 2 hrs.
N/A
N/A
N/A
30 min.
Dries to Handle
2 - 3 hrs.
N/A
N/A
N/A
1 hour
RecoatWindow
1 - 2 hrs.
N/A
Every6 months
3 - 5 min.
Less than 1 hr. or
more than24 hrs.
Strengths
Great for repairing nicks and scratches
on metal. Brush in cap makes it quick
and easy.
Replaces standardclogged tips. For more
even application onlarger projects.
Prevents metal items from rusting without painting.
Directly prime specific areas that are rusted. Brush
in cap makesit quick and easy.
Adhesion to preprimed doors. Fast Dry Time.
Application Tips
Apply even strokes. For deep scratches, apply
multiple layers.
N/A
Hold can upright12"-16" from the
surface and apply a light, thin, even coat to cover
the surface.
For deep scratchesor chips applyseveral coats a
few minutes apart.
Use a high quality brush or roller. Recommend
painting the door off the frame and allowing it to dry
fully before re-hanging.
Clean-up*
Lacquer thinner or acetone
N/A
Mineral Spirits
Mineral Spirits
Xylene orMineral Spirits
Product
Spray - Top Coats
Spray - Primer
Size
15 oz.
15 oz.
Resin Type
Chain-stopped Alkyd
(Oil-Based)
Alkyd andModified Alkyd
Surface Type
Metal, wood, concrete and
masonry
Metal, wood, concrete and
masonry
SurfaceRestrictions
Galvanized metal, glass and
some plastics orsurfaces that
exceed 200° F
Galvanized metal, glass and
some plastics orsurfaces that
exceed 200° F
Indoor
Yes
Yes
Outdoor
Yes
Yes
Gloss Level
Gloss,Semi-Gloss in Black & White, Flat in Brown, Black & White
Flat
Durability
Excellent
Excellent
Corrosion Resistance
Excellent
Excellent
ChemicalResistance
Very good
Very good when top coated
Dries toTouch
15 min.
10 - 20 min.
Dries to Handle
1 - 2 hrs.
1 - 2 hrs.
RecoatWindow
Within 1 hr. or after 48 hrs.
Anytime
Strengths
Superior rustprevention. Resists
abrasion, chipping, fading and dulling. Larger size for big jobs. Fast dry.
Provides twice theprotection of enamels
alone. Fast dry.
Application Tips
Apply several light coats a few minutes
apart to prevent running and sagging.
Apply to clean or sound rusted metal. May recoat anytime.
Clean-up*
Xylol or Mineral Spirits
Xylol or Mineral Spirits
R U S T - O L E U M® P R O f E S S I O N A L
*Xylol - wet or dry paint. Mineral spirits - wet paint.6
Product
Brush -Top Coats & Primer
Spray - Galvanizing Compound
Marking
Striping
Traffic Marking
Spray - Metallics
Acrylic Latex Top Coat & Primer
Size
Gallon
20 oz.
15 oz.
18 oz.
Gallon
15 oz.
Gallon
Resin Type
Standard Alkyd (Oil-Based)
Epoxy Ester& zinc
Modified Alkyd
Modified Alkyd
Acrylic Latex
Chain-stopped Alkyd
(Oil-Based)
Acrylic Latex
SurfaceRestrictions
Galvanized metal, glass and
some plastics orsurfaces that
exceed 200° F
Do not apply tosurfaces which
will be exposed to temperaturesabove 200° F.
Clean corrosion-free
metal
Plastics
Plastics
Plastics
Galvanized metal, styrofoam, some
plastics and surfaces that when
heated exceed 200 F
Galvanized metal, glass and some
plastics
Indoor
Yes
Yes
Yes
Yes
No
Yes
Yes
Outdoor
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Gloss Level
Gloss,Semi-Gloss in Black & White, Flat in Black& White
Flat
Flat
Flat
Flat
Gloss
Gloss
Durability
Excellent
Excellent
Fair to Good
Excellent
Excellent
Excellent
Excellent
Corrosion Resistance
Excellent
Excellent
N/A
N/A
N/A
Excellent
Excellent
ChemicalResistance
Very good
Fair
Good
Good
Good
Very Good
Very Good
Dries toTouch
2 - 4 hrs.
20 min.
15 min.
15 min.
30 min.
15 min.
1-2 hrs.
Dries to Handle
5 - 9 hrs.
1-2 hrs.
8 hrs.
8 hrs.
N/A
1-2 hrs.
2-4 hrs.
RecoatWindow
After 24 hrs.
Within 1 hr., after 24 hrs.
N/A
N/A
After 4 hrs.
Within 1 hr. or after 48 hrs.
Within 1 hr. or after 3 hrs.
Strengths
High-performanceformula providesexcellent color
retention and hiding.
Outstanding corrosionprotection.
Spray-through capallows for easier and cleaner application.
Resists weatherand abrasion for durable, long-lasting performance.
Durable, resists weather and abrasion.
Can be driven on after 8 hrs.
Brilliant metallic finish. Superior rust prevention. Resist abrasion, chipping, fading, and dulling. Larger size for big jobs. Fast dry.
High performance formula delivers exceptional
durability and allows for direct-to-metal coating (no
primer needed) with minimal order.
Clean-up*
Xylol or Mineral Spirits
Xylol or Mineral Spirits
Naptha or Paint Thinner
Naptha or Paint Thinner
Soap & Water
Xylol or Mineral Spirits
Soap/Water
R U S T - O L E U M® P R O f E S S I O N A L
Application Tips
Gallon coverage is 400 sq. ft. @ 1 mil thick.
Not for surfaces over 200° F.
No water immersion.
Keep can moving during application, shake can frequently. If topcoat is
desired, use a latex paint. Do not prime first.
Marking paint cannotbe used in Striping
Machine, tips are not interchangeable.
Use Marking Wand. Not water soluble, but
will withstand short-termgeneral weathering.
One coat application. Use in Striping Machine.
Easy applicationwith a 4" roller.
Apply several light coats a few minutes apart to
prevent running and sagging.
Gallon coverage is 545 sq. ft. @ 1 mil thick.
Not for surfaces over 200° F.
No water immersion.
Surface Type
Metal
Galvanized metal, sheet metal
Gravel, soil, grass, concrete and blacktop
Gravel, soil, grass, concrete and blacktop
Concrete orasphalt
Metal, wood, concrete and
masonry
Metal, wood, concrete and
masonry
7
Resin Type
Acrylic Vinyl Toluene
Modified Alkyd (Oil-based)
Acrylic Vinyl Toluene
Modified Alkyd (Oil-based)
Acrylic Lacquer (Solvent-Based)
Acrylic Latex
Acrylic Vinyl Toluene Modified
(Oil-Based)
Surface Type
Wood, wicker, metal, plaster, masonry and
unglazed ceramic
Wood, wicker, metal, plaster, masonry and
unglazed ceramic
Wood, wicker, metal, plaster, masonry and
unglazed ceramic
Wood, metal, plaster, masonry,
and unglazed ceramic
Wood, wicker, metal, plaster, masonry and
unglazed ceramic
Indoor
Yes
Yes
Yes
Yes
Yes
Outdoor
Yes
Yes
Yes
Yes
Yes
Durability
Excellent
Excellent
Excellent
Excellent
Excellent
Corrosion Resistance
Good
Good, better with primer
Good
Fair, Good with Primer
Good, betterwith a primer
ChemicalResistance
Good
Good
Dissolves in any strong
solvent.
Very Good
Good
Dries toTouch
20 min.
20 min.
15 min.
30 min
20 min.
Dries to Handle
1 hr.
1 hr.
30 min
1 hr.
1 hr.
RecoatWindow
Within 1 hr. or after 24 hrs.
Within 1 hr. or after 24 hrs.
Anytime over itself or follow recoat timing of base coat.
After 30 mins.
Within 1 hr. or after 24 hrs.
R U S T - O L E U M® P A I N T E R ’ S T O U c H®
Application Tips
Keep the spray can moving across the surface
at all times. For the smoothest finish, spray on
2-3 light coats a few minutes apart.
Prime bare wood and metal. Keep the spray can moving across the surface
at all times. For the smoothest finish, spray on
2-3 light coats a few minutes apart.
Do not use over Fluorescents or Metallics- will dull the bright finish.
For best results, prime first with a white primer. Use a foam brush or a good quality synthetic
brush.
Prime bare wood and metal. Keep the spray can moving across the surface
at all times. For the smoothest finish, spray on
2-3 light coats a fewminutes apart.
*Xylol - wet or dry paint. Mineral spirits - wet paint.
SurfaceRestrictions
Galvanized metal, styrofoam, some
plastics and surfaces that when
heated exceed 200° F
Galvanized metal, styrofoam, some
plastics and surfaces that when
heated exceed 200° F
Galvanized metal, styrofoam, some
plastics and surfaces that when
heated exceed 200° F
Galvanized metal, styrofoam, some
plastics and surfaces that when
heated exceed 200° F
Galvanized metal, styrofoam, some
plastics and surfaces that when heated
exceed 200° F
Strengths
Double Cover Technology provides more solids and premium pigments which
delivers twice the coverage as other
competitive general purpose brands. Primer increases adhesion and
durability of the finish coat.
Double Cover Technology provides more solids and premium pigments which
delivers twice the coverage as other
competitive general purpose brands. Broad
palette of colors. Fast dry.
Double CoverTechnology provides
more solids andpremium pigments
which goes further andlasts longer than other
competitive generalpurpose spray paints.
Crystal Clear finish won't yellow. Provides extra protection for bare and
painted finishes. Fast Dry.
Elegant metallic finish that can also be used for
faux finishing. Easy clean-up and low odor.
Primer increases the adhesion and durability of the finish coat. High
solids formula covers faster, hides
better, goes further and lasts longer.
Clean-up*
Xylol or Mineral Spirits
Xylol or Mineral Spirits
Xylol or Mineral Spirits
Soap & Water
Xylol orMineral Spirits
Product
Spray- 2X Primer
Spray- 2X Top Coats
Spray- 2X Clear
Brush-Water Based Metallics
Spray - Primer
Size
12 oz.
12 oz.
12 oz.
30 oz
12 oz.
Gloss Level
Flat
Gloss, Semi-Gloss,
Satin,Flat
Gloss, Matte, Semi-Gloss and Satin
Satin
Flat
*Xylol - wet or dry paint. Mineral spirits - wet paint.8
Product
Spray - Top Coat
Spray - Clear
Spray - Satin
Brush - Top Coats& Primers
Brush - Satin
Size
12 oz.
11 oz.
12 oz.
Half-pints& Quarts
Quart
Resin Type
Acrylic Vinyl Toluene Modified
(Oil-Based)
Acrylic Lacquer(Solvent-Based)
Acrylic Vinyl Toluene
Modified Alkyd (Oil-based)
Acrylic Latex
Acrylic Latex
Surface Type
Wood, wicker, metal, plaster, masonry and
unglazed ceramic
Wood, wicker, metal plaster, masonry and
unglazed ceramic
Wood, wicker, metal, plaster, masonry and
unglazed ceramic
Wood, metal plaster, masonry
and unglazedceramic
Wood, metal, plaster, masonry
and unglazedceramic
SurfaceRestrictions
Galvanized metal, styrofoam, some
plastics and surfaces that when heated
exceed 200° F
Galvanized metal, styrofoam, some
plastics and surfaces that when heated
exceed 200° F
Galvanized metal, styrofoam, some
plastics and surfaces that when heated
exceed 200° F
Galvanized metal, styrofoam, some
plastics and surfaces that when heated
exceed 200° F
Galvanized metal, styrofoam, some
plastics and surfaces that when heated
exceed 200° F
Indoor
Yes
Yes
Yes
Yes
Yes
Outdoor
Yes
Yes
Yes
Yes
Yes
Durability
Excellent
Excellent
Excellent
Excellent
Excellent
CorrosionResistance
Good, betterwith a primer
Good
Good, better with primer
Fair, very good with
primer
Good
ChemicalResistance
Good
Dissolves in any strong
solvent
Good
Very Good
Very Good
Dries toTouch
20 min.
15 min.
20 min.
30-60 mins.
30 min.
Dries toHandle
1 hr.
30 min.
1 hr.
1-2 hrs.
1 hr.
Recoat Window
Within 1 hr. or after 24 hrs.
Anytime over itself or follow recoat timing of base coat.
Within 1 hr. or after 24 hrs.
When first coat is fully dry - usually
2-4 hrs.
Within2-4 hrs.
Strengths
High solids formula covers faster, hides
better, goes further and lasts longer than other general purpose spraypaints. Silky smooth
finish. Fast dry.Broad palette of popular
colors. Primersare sandable.
Crystal clear finish won't yellow. Provides extra protection for bare and
painted finishes. Fast dry.
High solids formulacovers faster, hides better, goes further and lasts lon-ger than other spray paints.
Silky smooth finish. Fast dry.
Easy clean-up, low odor latex. Self-leveling, goes on smoothly and easily. Fast
dry. Broad palette ofpopular colors.
Primers are sandable.
Easy clean-up, low odor latex.
Self-leveling, goes on smoothly and easily. Fast dry.
Clean-up*
Xylol orMineral Spirits
Xylol orMineral Spirits
Xylol orMineral Spirits
Soap & Water
Soap & Water
Application Tips
Prime bare wood and metal. Keep the spray can moving across the surface
at all times. For the smoothest finish, spray on
2-3 light coats a fewminutes apart.
Do not use overFluorescents or
Metallics - will dullthe bright finish.
Prime bare woodand metal. Keep the spray
can moving across thesurface at all times.
For the smoothest finish, spray on 2-3 light coats
a few minutes apart.
Prime bare woodand metal. Use a
high-quality synthetic brush-it holds more paint
and smoothesout brush marks.
Prime bare woodand metal. Use a
high-quality synthetic brush-it holds more paint
and smoothesout brush marks.
R U S T - O L E U M® P A I N T E R ’ S T O U c H®
GlossLevel
Gloss,Semi-Gloss,
Flat
Gloss/Matte
Satin
Gloss,Semi-Gloss,
Flat
Satin
*Xylol - wet or dry paint. Mineral spirits - wet paint.9
Product
Spray - Aqua
Size
12 oz.
Resin Type
Water Reducible Alkyd
Surface Type
Wood, metal, wicker, plaster,
masonry and un-glazed
ceramics
SurfaceRestrictions
Galvanized metal, some plastics
and surfaces that when heated
exceed 200° F
Indoor
Yes
Outdoor
Yes
Gloss Level
Gloss
Durability
Excellent
Corrosion Resistance
Good, better with primer
ChemicalResistance
Good
Dries toTouch
30 min.
Dries to Handle
2 hrs.
RecoatWindow
Within 1 hr. or after 24 hrs.
Strengths
Low odor, easy soap and water clean up. Weather
resistant, with long lasting indoor/
outdoor durability.
Application Tips
Prime bare wood and metal. Keep the spray can moving across the surface at all times. For
the smoothest finish, spray on
2 -3 light coats a few minutes apart.
Clean-up*
Water
R U S T - O L E U M® A Q U A®
Product
Spray - Primer
Spray - Top Coat
Spray - Clear
Brush - Top Coats & Primers
Size
12 oz.
12 oz.
11 oz.
Half-pints & Quarts
Resin Type
Acrylic Vinyl Toluene
Modified Alkyd (Oil-Based)
Acrylic Vinyl Toluene
Modified Alkyd (Oil-Based)
Acrylic Lacquer (Solvent-Based)
Acrylic Latex
Surface Type
Wood, wicker, metal, plaster,
masonry and un-glazed ceramic
Wood, wicker, metal, plaster,
masonry and un-glazed ceramic
Wood, wicker, metal, plaster,
masonry and un-glazed ceramic
Wood, metal, plaster, masonry
and unglazedceramic
SurfaceRestrictions
Galvanized metal, styrofoam, some
plastics and surfaces that when heated
exceed 200° F
Galvanized metal, styrofoam, some
plastics and surfaces that when heated
exceed 200° F
Galvanized metal, styrofoam, some
plastics and surfaces that when heated
exceed 200° F
Galvanized metal, styrofoam, some
plastics and surfaces that when heated
exceed 200° F
Indoor
Yes
Yes
Yes
Yes
Outdoor
Yes
Yes
Yes
Yes
Gloss Level
Satin
Satin
Matte
Satin
Durability
Excellent
Excellent
Excellent
Excellent
Corrosion Resistance
Good, better with primer
Good, better with primer
Good
Fair, very good with
primer
ChemicalResistance
Good
Good
Dissolves in any strong
solvent
Very Good
Dries to Touch
20 min.
20 min.
15 min.
30 - 60 mins.
Dries to Handle
1 hr.
1 hr.
30 min.
1 - 2 hrs.
RecoatWindow
Within 1 hr. or after 24 hrs.
Within 1 hr. or after 24 hrs.
Anytime over itself or follow recoat timing of base coat
When first coat is fully dry - usually
2 - 4 hrs.
Strengths
Primer increases the adhesion and durability of the finish coat. High solids
formula covers faster, hides better, goes further and
lasts longer.
High solids formula covers faster, hides better, goes further and lasts longer than other spray paints. Silky smooth finish. Fast dry. Home fashion colors
reflect popular decorating trends.
Crystal clear finishwon’t yellow. Provides extra
protection for paint and decorative finishes.
Fast dry.
Easy clean-up, low odor latex. Self-leveling, goes on smoothly and easily. Fast dry. Home fashion colors reflect popular
decorating trends.
Application Tips
Prime bare woodand metal. Keep the spray
can moving across the surface at all times.
For the smoothest finish, spray on 2 -3 light coats
a few minutes apart.
Prime bare woodand metal. Keep the spray
can moving across the surface at all times.
For the smoothest finish, spray on 2 -3 light coats
a few minutes apart.
Do not use overFluorescents or
Metallics - will dullthe bright finish.
Prime bare woodand metal. Use a
high-quality synthetic brush - it holds more
paint and smoothesout brush marks.
Clean-up*
Xylol or Mineral Spirits
Xylol or Mineral Spirits
Xylol or Mineral Spirits
Soap & Water
R U S T - O L E U M® A M E R I c A N A c c E N T S®
*Xylol - wet or dry paint. Mineral spirits - wet paint.10
Product
DecorativePaint Pen
MetallicLeafing Pen
Spray - Craft& Hobby
Brush - Craft& Hobby
Stone
Terra Cotta
Size
1/3 fl. oz.
1/3 fl. oz.
3-oz.Spray
2-oz.Brush-on
12 oz.
12 oz.
Resin Type
Standard Alkyd (Oil-Based)
Standard Alkyd (Oil-Based)
Acrylic Vinyl Toluene
Modified Alkyd (oil-based)
Acrylic Latex
Hydrocarbon Acrylic Latex
Chain-stopped Alkyd
(Oil-Based)
Surface Type
tal, wood, glass and
ceramics
Metal, wood, glass andceramics
Wood, wicker, metal, plaster,
masonry and un-glazed
ceramic
Wood, metal, plaster, masonry
and unglazedceramic
Wood, metal, glass, plaster,
masonry and un-glazed ceramic
Wood, wicker, metal, plaster,
masonry and un-glazed ceramic
SurfaceRestrictions
Galvanized metal, styrofoam, some
plastics and surfaces that when heated
exceed 200° F
Galvanized metal, styrofoam, some
plastics and surfaces that when heated
exceed 200° F
Galvanized metal, styrofoam, some
plastics and surfaces that when heated
exceed 200° F
Galvanized metal, styrofoam, some
plastics and surfaces that when heated
exceed 200° F
Galvanized metal, styrofoam, some
plastics and surfaces that when heated
exceed 200° F
Galvanized metal, styrofoam, some
plastics and surfaces that when heated
exceed 200° F
Indoor
Yes
Yes
Yes
Yes
Yes
Yes
Outdoor
No
No
Yes
Yes
No
Yes
Gloss Level
Satin/Gloss Black
Gloss
Gloss,Semi-Gloss,
Satin
Gloss,Semi-Gloss,
Satin
Matte
Matte
Corrosion Resistance
Good
Good
Good, better with primer
Fair, very good with
primer
Fair
Excellent
ChemicalResistance
Very Good
Very Good
Good
Very Good
Fair, better with a clear
top coat
Very Good
Dries to Touch
15 - 30 min.
30 - 45 min.
20 min.
30-60 min.
3 - 4 hrs.
15 min.
Dries to Handle
1 hr.
1 - 2 hrs.
1 hr.
1-2 hrs.
5 - 6 hrs.
1 - 2 hrs.
RecoatWindow
2 - 4 hrs.
2 - 4 hrs.
Within 1 hr. or after 24 hrs.
When first coat is fully dry - usually
2-4 hrs.
5 - 6 hrs.
1 - 2 hrs.
Strengths
Easy to use, fast dry, works on wood, glass, metal, and
ceramics.
Easy to use, fast dry,works on wood, glass, metal, and ceramics.
High solids formula covers faster, hides better, and
lasts longer than other craft paints. Silky smooth finish.
Easy clean-up,low-odor latex.
Self-leveling, goes on smoothly and easily.
Fast dry.
Soap & Water
Xylol or Mineral Spirits
Application Tips
Shake for 30 sec. priorto use. Lightly depress
tip several times to start paint flow.
Shake for 30 sec. priorto use. Lightly depress
tip several times to start paint flow.
Prime bare wood and metal. For the smoothest finish, spray on 2-3 light
coats a few minutes apart. A clear top coat may be
applied over a color within 1 hr. or after 24 hrs.
Prime bare woodand metal. Use
high-quality synthetic brush - it holds morepaint and smoothes
out brush marks.
Spray multiple light coats, 15 minutes apart. Use a
base coat of a similar color to increase hiding and
coverage. Top coat with a clear coat (after 4 hours)
for extra protection.
Prime bare wood and metal. Keep the can moving
across the surface at all times. For smoothest
finish, spray on 2-3 light coats a few
minutes apart.
Clean-up*
Xylol or Mineral Spirits
Xylol or Mineral Spirits
Xylol orMineral Spirits
Soap & Water
After 15 min.
Within 1 hr. or after 48 hrs.
R U S T - O L E U M® A M E R I c A N A c c E N T S®
Durability
ExcellentVery Good
Very Good
Excellent
Excellent
Fair, better with a clear
top coat
Excellent
11
Size
12 oz.
11 oz.
12 oz.
12 oz.
11 oz.
Half-pint
11 oz.
Half-pint
Resin Type
Chain-stopped Alkyd
(Oil-Based)
Acrylic Lacquer (Oil-Based)
Acrylic Lacquer (Solvent-Based)
Vinyl TolueneAlkyd
(Oil-Based)
Acrylic Lacquer (Solvent-Based)
Acrylic Latex
Acrylic Lacquer (Solvent-Based)
Acrylic Latex
Surface Type
Wood, wicker, metal, plaster,
masonry and un-glazed ceramic
Wood, metal, plaster, masonry,
ceramics and wicker
Wood, metal, plaster, masonry
and unglazedceramic
Wood, metal, plaster, masonry
and unglazedceramic
Wood, metal, plaster, masonry
and unglazedceramic
SurfaceRestrictions
Galvanized metal, styrofoam, some
plastics and surfaces that when heated
exceed 200° F
Galvanized metal, styrofoam, some
plastics and surfaces that when heated
exceed 200° F
Galvanized metal, styrofoam, some
plastics and surfaces that when heated
exceed 200° F
Galvanized metal, styrofoam, some
plastics and surfaces that when heated
exceed 200° F
Galvanized metal, styrofoam, some
plastics and surfaces that when heated
exceed 200° F
Indoor
Yes
Yes
Yes
Yes
Yes
Yes
Outdoor
Yes
Yes
Yes**
Yes**
Yes
Yes
Gloss Level
Matte
Varies
Matte
Matte
Gloss
Matte
Gloss
Matte
Durability
Excellent
Excellent
Good
Fair, better with a clear
top coat
Excellent
Excellent
Excellent
Excellent
Corrosion Resistance
Excellent
Excellent
Fair
Fair
Excellent
Excellent
Excellent
Excellent
ChemicalResistance
Very Good
Very Good
Good
Fair, betterwith a clear
top coat
Very Good
Very Good
Very Good
Very Good
Dries toTouch
15 min.
10 min.
15 min.
15 min.
30 min.
20 min.
30 min.
20 min.
Dries to Handle
1 - 2 hrs.
30 min.
30 min.
30 min.
30 min.
1 - 2 hrs.
30 min.
1 - 2 hrs.
RecoatWindow
Within 1 hr. or after 48 hrs.
Anytime
Anytime
Do not recoat
Anytime
N/A
Anytime
N/A
Strengths
Quick, easy look of fine textured sandstone. Dura-
ble finish holdsup to the elements.
Unique palette of soft, nature-inspired colors.
Quick, rich look ofprecious metals.
Resists chipping, andpeeling. Fast drying.
Quick, easy look of antiqued
crackled paint.
Quick, easy look ofantiqued metal.
All tools included in kit. Fool-proof process. Rich, authentic-looking finish.
Durable finish holds up to the elements.
Quick, easy look ofantiqued metal. All tools
included in kit. Fool-proof process. Rich, authentic-looking finish. Durable
finish holds up to the elements.
Application Tips
Prime bare wood and metal. Keep the can moving
across the surface at all times. For smoothest finish, spray on 2-3 light coats a
few minutes apart.
Prime bare metal or wood first. Use 8781 Aluminum
primer on hard to coatsurfaces and galvanized
metal. Wait at least 4 hoursbefore applying Designer Metallics over the primer.
Prime bare wood, metal,masonry, plaster or
porous surfaces.Top coat with clear coat
for protection frommoisture, dirt
and wear.
Prime bare wood and metal. Dab or wipe off desired amount
of top coat immediately after applying. For a rich authentic
look, leave top coat in the crevices of the surface where real metal oxidizes or darkens
with age.
Prime bare wood and metal. Dab or wipe off desired
amount of top coat immediately after applying. For a rich authentic look,
leave top coat in the crevices of the surface where real metal oxidizes or darkens
with age.
Clean-up*
Xylol or Mineral Spirits
Xylol or Mineral Spirits
Xylol or Mineral Spirits
Xylol or Mineral Spirits
Soap & Water
Xylol or Mineral Spirits
Soap & Water
**If sealed with exterior clear coat.*Xylol - wet or dry paint. Mineral spirits - wet paint.
R U S T - O L E U M® A M E R I c A N A c c E N T S®
Product
Sandstone
Designer Metallic
Crackle Creations Kit
Patina Kit
Antique Gold Kit
12
Product
Antique Pewter Kit
AntiqueCopper Kit
Natural Rust Kit
Classic Leather Kit
Distressed Kits ✝
Size
11 oz.
Half-pint
11 oz.
Half-pint
12 oz.
Half-pint
12 oz.
Half-pint
Quart
Half-pint
Resin Type
Acrylic Lacquer (Solvent-Based)
Acrylic Latex
Acrylic Lacquer (Solvent-Based)
Acrylic Latex
Chain-stopped Alkyd
(Solvent-Based)
Acrylic Latex
Chain-stopped Alkyd
(Solvent-Based)
Acrylic Latex
Acrylic Latex
Acrylic Resin
Surface Type
Wood, metal, plaster, masonry
and unglazedceramic
Wood, metal, plaster, masonry
and unglazedceramic
Wood, metal, plaster, masonry
and unglazedceramic
Wood, metal, plaster, masonry
and unglazedceramic
Wood, metal, plaster, masonry
and unglazedceramic
SurfaceRestrictions
Galvanized metal, styrofoam, some
plastics andsurfaces that when heated
exceed 200° F
Galvanized metal, styrofoam, some
plastics andsurfaces that when heated
exceed 200° F
Galvanized metal, styrofoam, some
plastics andsurfaces that when heated
exceed 200° F
Galvanized metal, styrofoam, some
plastics and surfaces that when heated
exceed 200° F
Galvanized metal, styrofoam, some
plastics and surfaces that when heated
exceed 200° F
Indoor
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Outdoor
Yes
Yes
Yes
Yes
Yes
Yes
Yes**
Yes**
Gloss Level
Gloss
Matte
Gloss
Matte
Matte
Matte
Matte
Matte
Flat
Flat
Durability
Excellent
Excellent
Excellent
Excellent
Excellent
Excellent
Excellent
Excellent
Excellent
Excellent
Corrosion Resistance
Excellent
Excellent
Excellent
Excellent
Excellent
Excellent
Excellent
Excellent
N/A
N/A
ChemicalResistance
Very Good
Very Good
Very Good
Very Good
Very Good
Very Good
Very Good
Very Good
Good
Good
Dries toTouch
30 min.
20 min.
30 min.
20 min.
1 hr.
20 min.
1 hr.
20 min.
30 min.
15 min.
Dries to Handle
30 min.
1 - 2 hrs.
30 min.
1 - 2 hrs.
1 hr.
1 - 2 hrs.
1 hr.
1 - 2 hrs.
1 hr.
1 hr.
RecoatWindow
Anytime
N/A
Anytime
N/A
Within 1 hr.or after48 hrs.
N/A
Within 1 hr.or after48 hrs.
N/A
After 30 mins.
After 15 mins.
Strengths
Quick, easy look ofantiqued metal. All tools
included in kit. Fool-proof process. Rich, authentic-looking finish. Durable finish holds up
to the elements.
Quick, easy look of antiqued metal. All tools
included in kit.Fool-proof process. Rich, authentic-looking finish. Durable, finish holds up
to the elements.
Quick, easy look ofweathered metal. Alltools included in kit.Fool-proof process.
For maximum protection, top coat with Rust-Oleum® Stops Rust® Paint.
This product may not be compatible with all
surfaces and all conditions surrounding
application. Before applying to any
surface, always test product in a small,
inconspicuous area to ensure no damage
will result.
After applying stripper, use 2 mil to 4 mil
polyethylene film laid and secured over wet
stripper to retard evaporation and help
hold stripper on surface. Do not reuse
polyethylene film.
N/A
N/A
Clean-up
Xylol or Mineral Spirits
Water
Water
N/A
N/A
Approx. Sq. Ft.†
N/A
N/A
N/A
N/A
N/A
R U S T - O L E U M® B R A N d E d
†Approximate sq. ft. varies per color.
28
Product
Spray - General Purpose
Spray - General Purpose Crystal
Clear
Spray - Engine Enamel
Spray - Fabric & Vinyl
Spray - Paint for Plastic
Spray - Metallic
Size
12 oz.
11 oz.
12 oz.
11 oz.
12 oz.
11 oz.
Resin Type
Modified Alkyd
Acrylic
Modified Alkyd
Vinyl acrylic
Acrylic VinylTolueneModified
Alkyd, withproprietaryadhesion promotingpolymers
(oil-based)
Acrylic
Surface Type
Wood, wicker, metal, plastic,
masonry
Wood and metal
Automotive engines and automotive
surfaces which reach
intermittent temperatures up
to 500° F
Vinyl, simulated leather, some
fabrics
Automotive plastics,
polypropylene, polystyrene, resin, PVC,
fiberglass, vinyl plastics
Automotive plastics and
metal
SurfaceRestrictions
Galvanized metal and surfaces that
when heated exceed 200° F
Galvanized metal and surfaces that
when heated exceed 200° F
Surfaces that come in contact with
direct flames and surfaces that when
heated exceed 500° F
Surfaces that come in contact with
direct flames and surfaces that when
heated exceed 200° F
Styrofoam
Galvanized metal and surfaces that
when heated exceed 200° F
Indoor
Yes
Yes
Yes
Yes
Yes
Yes
Outdoor
Yes
Yes
Yes
Yes
Yes
No
Gloss Level
Gloss, Satin, Flat
Gloss Clear
Gloss, Semi-Gloss, Low Gloss
Gloss, Flat
Semi-Gloss
Semi-Gloss
Durability
Excellent
Excellent
Excellent
Good
Excellent
Fair
Corrosion Resistance
Good, better with a primer
Good
Good, better with a primer
N/A
N/A
Good, better with a primer
ChemicalResistance
Good
Fair
Good
Fair
Good
Fair
Dries toTouch
20 min.
20 min.
20 min.
10 min.
20-30 min.
10 min.
Dries to Handle
1 hr.
1 hr.
1 hr.
1 hr. Wait at least 6
hours before
sitting on or using a painted object.
1 hr.
30 min.
RecoatWindow
Within 1 hr. or after 24 hrs.
Recoat at any time.
Within 1 hr. or after 24 hrs.
Recoat at any time.
Within 1 hr. or after 48 hrs.
Recoat at any time.
Strengths
Smooth gloss finish with superior coverage and hiding that goes further
than other general purpose paints. Fast dry formula saves project
time.
Smooth, clear gloss finish with superior coverage that goes further than other
general purpose paints. Fast dry formula saves
project time.
Creates a smooth finish on automotive
components and resists intermittent heat up to
500° F.
Provides excellent adhesion and won't rub
off, crack or peel.
Renews and restores indoor and outdoor
plastic without the need for a primer.
Creates a shiny and distinctive finish.
Application Tips
Avoid spraying in very windy, dusty conditions.
Cover the surrounding area to protect from spray mist.
Apply over Rust-Oleum® General Purpose paints for
a clear gloss finish that seals and protects.
Apply over Rust-Oleum® Engine Primer for superior
adhesion and hiding on bare metal.
Use outdoors or in a well-ventilated area such
as an open garage.
Always first test paint in a hidden area before
beginning your project.
For best appearance, apply two light coats a few
minutes apart.
Clean-up*
Xylol or Mineral Spirits
Xylol or Mineral Spirits
Xylol or Mineral Spirits
Xylol or Mineral Spirits
Xylol or Mineral Spirits
Xylol or Mineral Spirits
R U S T - O L E U M® A U T O M O T I V E c O A T I N G S
*Xylol - wet or dry paint. Mineral spirits - wet paint.†Approximate sq. ft. varies per color.
29
Product
Spray - Textured Metallic
Spray - High Performance
Wheel
Spray - High Performance Wheel Clear
Spray - Rubberized
Undercoating
Spray - Professional Undercoating
Spray - Truck Bed Coating
Size
11 oz.
12 oz.
11 oz.
15 oz.
15 oz.
15 oz.
Resin Type
Chain-Stopped Alkyd
Acrylic
Acrylic
Asphaltic Hydrocarbon
Modified Alkyd
Chain-stopped Alkyd
Surface Type
Automotive properly prepared
plastics, bare metal, aluminum,
fiberglass, primed surfaces,
OEM painted surfaces
Plastic hubcaps, wheels made of
aluminum or steel
Plastic hubcaps, wheels made of
aluminum or steel
Underbodies and wheel wells of cars, trucks, trailers and recreational
vehicles
Bare and primed metals,
underbodies and wheel wells of cars, trucks, trailers and recreational
vehicles
Bare and primed metal truck beds, automotive metal
surfaces
SurfaceRestrictions
Surfaces that come in contact with
direct flames and surfaces that when
heated exceed 200° F
Galvanized metal and surfaces that
when heated exceed 200° F
Galvanized metal and surfaces that
when heated exceed 200° F
Items exposed to heat, such as
mufflers, catalytic converters, heat
shields etc.
Items exposed to heat; mufflers,
catalytic converters, heat shields etc.
Surfaces that come in contact with
direct flames and surfaces that when heated
exceed 200° F
Indoor
Yes
Yes
Yes
No
Yes
Yes
Outdoor
Yes
Yes
Yes
Yes
Yes
Yes
Gloss Level
Flat
Flat, Semi-Gloss
Gloss
Flat
Flat
Flat
Durability
Excellent
Good
Good
Good
Good
Good
Corrosion Resistance
Excellent
Good
Good
Good
Excellent
Excellent
ChemicalResistance
Very Good
Fair
Fair
Fair
Very Good
Very Good
Dries toTouch
20-30 min.
10 min.
20 min.
Air dry for a minimum of 1 hour
Air dry for a minimum of 1 hour
Air dry for a minimum of 1 hour.
Dries to Handle
1 hr.
30 min.
1 hr.
Air dry for a minimum of 1 hour.
Air dry for a minimum of 1 hour.
Allow 72 hours for a
full cure before placing items in the truck
bed.
RecoatWindow
Within 1 hour or after 48
hours.
Recoat at any time.
Recoat at any time.
Recoat at any time.
Within 1 hour or after 48
hours.
Within 1 hr. or after 24 hrs.
Strengths
Stops Rust® formula prevents rust and
corrosion.
Long lasting formula enhances wheel's appearance and prevents rust.
Can be applied over Rust-Oleum® High
Performance Wheel to enhance wheel's gloss.
Paintable, rust-resistant formula protects from
corrosion and moisture.
Paintable, rust-resistant formula protects from
corrosion and moisture and deadens sound.
Provides a durable, abrasion resistant,
textured, non-skid finish and conforms to the exact shape of the
truck bed.
Application Tips
For plastic surfaces, thoroughly wipe down the surface with Rust-Oleum®
Paint Thinner for best adhesion.
For best results, remove hubcaps and wheels from
the vehicle before applying.
For best results, remove hubcaps and wheels from
the vehicle before applying.
Hold can 12-16" from surface and spray in a steady back and forth
motion, slightly overlapping each stroke. For best
results, apply two coats.
If valve clogs, twist and pull off spray tim and rinse it in a solvent such as Mineral
Spirits. Do not stick a pin or other objects in the stem.
Before application, remove all rust, oil and grease from the surface to be coated.
The surface must be clean and dry.
Clean-up*
Xylol or Mineral Spirits
Xylol or Mineral Spirits
Xylol or Mineral Spirits
Xylol or Mineral Spirits
Xylol or Mineral Spirits
Xylol or Mineral Spirits
R U S T - O L E U M® A U T O M O T I V E c O A T I N G S
*Xylol - wet or dry paint. Mineral spirits - wet paint.†Approximate sq. ft. varies per color.
30
Product
Brush - Truck Bed Coating
Kit - Truck Bed Coating Applicator
Spray - High Heat
Spray - Appliance Epoxy
Spray - BBQ & Stove
Spray - Camouflage
Size
Quart & Gallon
Kit - Roller frame, roller cover,
scuff pad, brush and roller pan
12 oz.
12 oz.
12 oz.
12 oz.
Resin Type
Acrylic
N/A
Silicone
Epoxy ester/alkyd
Silicone
Modified Alkyd
Surface Type
Bare and primed metal truck beds, automotive metal
surfaces
N/A
Automotive engines and automotive
surfaces which reach
intermittent temperatures up
to 2000° F
Interior metal surfaces,
exteriors of dishwashers, refrigerators,
laundry machines,
cabinets, tables
Metal and automotive
surfaces which reach
intermittent temperatures up
to 1200° F
Plastic and metal
SurfaceRestrictions
Surfaces that come in contact with
direct flames and surfaces that when
heated exceed 200° F
N/A
Surfaces that come in contact with
direct flames and surfaces that when
heated exceed 2000° F
Continuous water submersion and
surfaces that when heated exceed
200° F
Surfaces that come in direct contact
with flames or food, such as grill grates
Items that are submersed in water
for extended periods of time
Indoor
Yes
N/A
Yes
Yes
Yes
Yes
Outdoor
Yes
N/A
Yes
No
Yes
Yes
Gloss Level
Flat Black
N/A
Flat
Gloss
Flat
Ultra Flat
Durability
Good
N/A
Fair
Excellent
Excellent
Excellent
Corrosion Resistance
Good
N/A
Fair
Excellent
Excellent
Good, better with a primer
ChemicalResistance
Good
N/A
Good
Good
Good
Good
Dries toTouch
First coat dries to the
touch in 1-2 hrs.
N/A
30 min.
2-4 hrs.
30 min.
20 min.
Dries to Handle
Allow 24 hours for a
full cure before placing items in the truck
bed.
N/A
1-2 hr.
5-9 hrs.
1-2 hr.
1 hr.
RecoatWindow
After 2 hrs.
N/A
Anytime after 1 hr.
Within 1/2 hr. or after 1
week.
Within 1 hr. or after 48 hrs.
Within 1 hr. or after 24 hrs.
Strengths
Provides a durable, abrasion resistant,
textured, non-skid finish and conforms to the
exact shape of the truck bed.
Contains all tools needed for coating a
truck bed.
Renews and protects surfaces from rust
which reach temperatures up to
2000° F.
Dries to an ultra-hard, moisture resistant, washable enamel.
Corrosion resistant formula withstands temperatures up to
1200° F.
Non-reflective, ultra flat finish can be combined
with other colors to create different patterns for various backgrounds.
Application Tips
For best results, apply with Rust-Oleum® Truck Bed
Applicator Kit.
For best results, use kit to apply Rust-Oleum® Truck
Bed Coating.
Apply over Rust-Oleum® High Heat Primer for
superior adhesion and hiding on bare metal.
Priming the surface before application is not recommended.
After application, wait at least 1 hour before heating.
For a real life pattern, use leaves and twigs as
stencils. Apply a base coat of color. Lay the leaves and
twigs randomly over the object you are painting.
Spray over the items using three or more colors.
Clean-up*
Acetone
N/A
Xylol or Mineral Spirits
Xylol or Mineral Spirits
Xylol or Mineral Spirits
Xylol or Mineral Spirits
R U S T - O L E U M® A U T O M O T I V E c O A T I N G S
*Xylol - wet or dry paint. Mineral spirits - wet paint.†Approximate sq. ft. varies per color.
31
Product
Spray - Marking Paint
Spray - Farm Equipment
Size
11 oz.
12 oz.
Resin Type
Modified Alkyd
Alkyd
Surface Type
Gravel, grass, pavement, soil,
lumber
Metal and plastic
SurfaceRestrictions
Surfaces that come in contact with
direct flames and surfaces that when
heated exceed 2000° F
Galvanized metal and surfaces that
when heated exceed 200° F
Indoor
Yes
Yes
Outdoor
Yes
Yes
Gloss Level
Flat
Gloss
Durability
NA
Excellent
Corrosion Resistance
NA
Excellent
ChemicalResistance
NA
Good
Dries toTouch
15 min.
10 min.
Dries to Handle
8 hr.
1 hr. Wait at least 6
hours before
sitting on or using a painted object.
RecoatWindow
N/A
Within 1 hr. or after 24 hrs.
Strengths
Non-permanent formula marks the spot and withstands general
weathering.
Durable formula offers excellent chip
resistance, coverage and matches original
equipment colors.
Application Tips
Clean valve by spraying upright for 2-3 seconds
after each use.
Wait 6 hours before sitting in or using equipment that
has been painted.
Clean-up*
Xylol or Mineral Spirits
Xylol or Mineral Spirits
Auto Topcoat
Auto TruckBed Coating
Auto Professional Undercoating
12 oz.
15 oz.
15 oz.
Chain-Stopped Alkyd
(Oil-Based)
Alkyd(Oil-Based)
Alkyd(Oil-Based)
Metal, wood, concrete and
masonry
Metal(Bare or Primed)
Metal(Bare or Primed)
Glass and some plastics
Glass and some plastics
Glass and some plastics
Yes
Yes
Yes
Yes
Yes
Yes
Gloss, Semi-Gloss
& Flat
Flat
Flat
Excellent
Excellent
Excellent
Excellent
Excellent
Excellent
Very good
Very good
Very good
15 min.
1 hr.
1 hr.
1-2 hrs.
Allow72 hrs. for full cure before placing items in the truck
bed
1-2 hrs.
Within 2 hrs. or after 48 hrs.
Within 1 hr. or after24 hrs.
Within 1 hr. or after24 hrs.
Durable, long-lasting finish resists nicks and
scratches. UV and weather resistant for
superior color and gloss retention. Wide fan
spray tip makes it easy to achieve a smooth, professional finish.
Durable, abrasionresistant, textured,non-skid finish that
reduces road noise and contours to the exact
shape of the truck bed.
Provides corrosiveprotection from water,
salt and otherchemicals. Deadens
sound and provides a barrier from rust.
Spray in a steady back-and-forth motion,
slightly overlapping each stroke. Apply two or more light coats a few minutes apart. Apply multiple light
coats vs. applying one heavy coat.
Spray in a steadyback and forth motion,
slightly overlapping each stroke. For best results
apply two coats -allow product to dry
for 1-2 minutesbetween coats.
Use outdoors orin a well ventilated
area such as onopen garage.
Xylol or Mineral Spirits
Xylol or Mineral Spirits
Xylol or Mineral Spirits
*Xylol - wet or dry paint. Mineral spirits - wet paint.†Approximate sq. ft. varies per color.
R U S T - O L E U M® A U T O M O T I V E c O A T I N G S
32
Product
Spray - Filler Primer
Spray - Self Etching Primer
Spray - Sandable Primer
Spray - Primer Sealer
Spray - Rusty Metal Primer
Spray - Clean Metal Primer
Size
11 oz.
12 oz.
12 oz.
12 oz.
12 oz.
12 oz.
Resin Type
Alkyd
Alkyd
Alkyd
Alkyd
Alkyd
Alkyd
Surface Type
Wood, metal and fiberglass
Bare metal, aluminum and
fiberglass
Bare metal, aluminum and
fiberglass
Metal and fiberglass
Rusted metal
Clean, lightly rusted or previously
painted metal.
SurfaceRestrictions
Galvanized metal and surfaces that
when heated exceed 200° F
Surfaces that when heated exceed
200° F
Galvanized metal and surfaces that
when heated exceed 200° F
Galvanized metal and surfaces that
when heated exceed 200° F
Surfaces that when heated exceed
200° F
Galvanized metal and surfaces that
when heated exceed 200° F
Indoor
Yes
Yes
Yes
Yes
Yes
Yes
Outdoor
Yes
Yes
Yes
Yes
Yes
Yes
Gloss Level
Flat
Flat
Flat
Flat
Flat
Flat
Durability
Excellent
Excellent
Excellent
Excellent
Excellent
Excellent
Corrosion Resistance
Excellent
Excellent
Excellent
Excellent
Excellent
Excellent
ChemicalResistance
Good
Good
Good
Good
Good
Good
Dries toTouch
10 min.
10 min.
10 min.
10 min.
15-30 min.
15-30 min.
RecoatWindow
Once dry
2 min.
Once dry
Once dry
Within 1 hr. or after 48 hrs.
Within 1 hr. or after 48 hrs.
Strengths
High-build formula fills in minor imperfections
in the surface.
Etches and primes in 1 easy step.
All purpose formula sands smooth for the
ultimate finish.
Bonds base coats and when applied over a primer, prevents top
coats from soaking into the primed surface for
an even finish.
Can be applied directly to rusted metal
surfaces.
Provides more than two times the rust
prevention of using lacquers and
enamels alone.
Application Tips
Allow 2-4 before dry sanding.
Apply a top-coat after allowing Self Etching Primer to dry for 30
minutes.
For best results, allow to dry 2-4 hours before
sanding.
Use outdoors or in a well-ventilated area such
as an open garage.
Apply multiple light coats instead of 1 heavy coat.
Hold can 10-16" from surface and spray in a steady back and forth
motion, slightly overlapping each stroke.
Clean-up*
Xylol or Mineral Spirits
Xylol or Mineral Spirits
Xylol or Mineral Spirits
Xylol or Mineral Spirits
Xylol or Mineral Spirits
Xylol or Mineral Spirits
R U S T - O L E U M® A U T O M O T I V E P R I M E R S
*Xylol - wet or dry paint. Mineral spirits - wet paint.†Approximate sq. ft. varies per color.
Dries to Handle
15-30 min.
15-30 min.
15-30 min.
15-30 min.
1-2 hr.
1-2 hr.
33
Product
Spray - Plastic Primer
Spray - Cold Galvanizing Compound
Spray - Engine Primer
Spray - High Heat Primer
Brush - Primer Surfacer
Auto Primer
Size
12 oz.
12 oz.
12 oz.
12 oz.
Gallon.
12 oz.
Resin Type
Oil-Based
Epoxy ester
Modified Alkyd
Silicone
Alkyd, withproprietaryadhesion promotingpolymers
Modified Alkyd (Oil-Based)
Surface Type
Plastic
Unpainted sheet metal,
spot-welded metal, galvanized
surfaces
Automotive engines and automotive
surfaces which reach
intermittent temperatures up
to 500° F
Automotive engines and automotive
surfaces which reach
intermittent temperatures up
to 2000° F
Metal, fiberglass
Metal
SurfaceRestrictions
Surfaces that when heated exceed
200° F
Surfaces that when heated exceed
200° F
Surfaces that come in contact with
direct flames and surfaces that when
heated exceed 500° F
Surfaces that come in contact with
direct flames and surfaces that when
heated exceed 2000° F
Surface must be sound and clean
Glass and some plastics
Indoor
Yes
Yes
Yes
Yes
Yes
Yes
Outdoor
Yes
Yes
Yes
Yes
Yes
Yes
Gloss Level
Flat
Flat
Flat
Flat
Flat
Flat
Durability
Good
Good
Good
Fair
Excellent
Excellent
Corrosion Resistance
N/A
Excellent
Good
Fair
Excellent
Excellent
ChemicalResistance
Good
Good
Good
Good
Good
Very good when top coated
Dries toTouch
20 min.
30 min.
20 min.
30 min.
30 min.
15 min.
Dries to Handle
1 hr.
1-2 hr.
1 hr.
1-2 hr.
1-2 hr.
15-30 min.
RecoatWindow
After 1 hr.
After 1 hr.
Within 1 hr. or after 24 hrs.
Anytime after 1 hr.
When dry to the touch
Anytime once dry
Strengths
Produces the ultimate bond for paint on plastic
surfaces.
Dried film contains 93% pure Zinc and requires
no top coat.
Creates a smooth finish on automotive
components and resists intermittent heat up to
500° F.
Renews and protects surfaces from rust
which reach temperatures up to
2000° F.
Improves adhesion color of the final topcoat.
Hides sanding scratches and quickly fills in uneven surfaces.
Superior adhesionto bare metal andpreviously painted
surfaces. Compatible with most automotive touch-up paints. Wet sandable. Fast dry.
Application Tips
Clean area to be primed with Mineral Spirits to
remove all oil, grease, wax and dirt. Dry thoroughly.
For maximum protection, top coat with Rust-Oleum®
Rust Preventative Auto Paint.
Top coat with Rust-Oleum® Engine Enamel for superior
protection and hiding on bare metal.
Top coat with Rust-Oleum® High Heat Paint for superior
protection and hiding on bare metal.
Must be combined with an equal 1:1 part of Rust-
Oleum Specialty Reducer before spray application.
Spray in a steadyback-and-forth motion,
slightly overlapping each stroke. Apply two or more light coats a few minutes apart. Apply multiple light
coats vs. applying one heavy coat. Test top coats in an inconspicuous area first.
Clean-up*
Xylol or Mineral Spirits
Xylol or Mineral Spirits
Xylol or Mineral Spirits
Xylol or Mineral Spirits
Rust-Oleum® Specialty Reducer
Xylol or Mineral Spirits
*Xylol - wet or dry paint. Mineral spirits - wet paint.†Approximate sq. ft. varies per color.
R U S T - O L E U M® A U T O M O T I V E P R I M E R S
34
Product
Topside Paint
Boat BottomAnti-Fouling Paint
Spar Varnish
Metal Primer
Wood & FiberglassPrimers
Anti-Slip Additive
Size
Quart
Quart
Quart
Quart
Quart
1/2 Pint
Resin Type
Modified Alkyd (Oil-Based)
Modified Epoxy
Urethane
Modified Alkyd (Oil-Based)
Modified Alkyd(Oil-Based)
N/A
Surface Type
Fiberglass, wood and metal surfaces above the waterline
Fiberglass, wood and steel
surfaces below the waterline
Exterior wood surfaces above the waterline
Bare, painted or lightly rusted
metal surfaces above the waterline
Wood and fiberglass
surfaces above the waterline
Wood, metal, fi-berglass and
concrete
SurfaceRestrictions
Galvanized metal, glass and some
plastics or surfaces that exceed 200° F
Galvanized metal and aluminum
Galvanized metal, glass, ceramic and some plastics. Not for use below the
waterline
Galvanized metal, glass, ceramic and some plastics. Not for use below the
waterline
Galvanized metal, glass, ceramic and some plastics. Not for use below the
waterline
None
Indoor
Yes
Yes
Yes
Yes
Yes
Yes
Outdoor
Yes
Yes
Yes
Yes
Yes
Yes
Gloss Level
Gloss and Semi-Gloss
Flat
Gloss
Flat
Flat
N/A
Durability
Excellent
Excellent
Excellent
Excellent
Excellent
Very Good
Corrosion Resistance
Excellent
Very good
Excellent
Excellent
Excellent
N/A
ChemicalResistance
Very good
Very good
Excellent
Very goodwhen
topcoated
Very goodwhen
topcoated
N/A
Dries toTouch
2-4 hrs.
N/A
6 hrs.
2-4 hrs.
1 hr.
N/A
Dries to Handle
4-7 hrs.
N/A
12 hrs.
4-6 hrs.
4 hrs.
N/A
RecoatWindow
After 24 hrs.
After 4 hrs.
10-16 hrs.
4-7 hrs.
After 4 hrs.
N/A
Strengths
Easy to apply.Superior coverage and color retention.
Prevents build-up ofbarnacles, algae and
other marine growth. Can be applied over most aged, hard antifouling coatings.
Provides maximum protection against sun, water, weather, sea spray and chemicals.
Twice as durable asconventional wood finishes. Expands and contracts with
changing weather conditions.
Superior adhesion prevents chipping, cracking and peeling. Eliminates the need for additional topcoats
and touch ups.
Dries quickly and is easy to sand.
Will not change the color, performance
or properties of the paint.
Application Tips
Apply one thin, even coat per day. Applying two or more coats in one day or applying excessively heavy films will lead to insufficient drying of the paint. Do not apply on humid days or when rain is threatening. Do not apply in the late afternoon
when the wet film may beadversely affected by dew.
Two coats should be applied for best
antifouling protection. Mix thoroughly before use. Do not use this product on aluminum
hulls and outdrives.
Do not apply over shellac, fresh lacquer,
fresh varnish or lacquer sanding sealers.
Allow to dry overnight before applying Topside
paint. Thin only with Mineral Spirits.
Mix thoroughlybefore use.
Add one container of Anti-Slip Additive per quart of Topside Paint. Stir additive thoroughly
into paint until an even consis-tency is achieved. Stir often during use to avoid settling.
Clean-up*
Xylol orMineral Spirits
Mineral Spirits
Paint Thinner or Mineral
Spirits
Xylol orMineralSpirits
Xylene
N/A
R U S T - O L E U M® M A R I N E c O A T I N G S
Product
Road Warrior Kit
Size
1 Gallon when mixed
Resin Type
2 Component Modified Epoxy
Surface Type
Metal andconcrete
SurfaceRestrictions
Galvanized metal, glass and some
plastics or surfaces that exceed 200° F
Indoor
Yes
Outdoor
Yes
Gloss Level
Satin
Durability
Excellent
Corrosion Resistance
Excellent
ChemicalResistance
Excellent
Dries toTouch
2-4 hrs.
Dries to Handle
24 hrs. (light duty use) -
7 days (heavy
duty use)
RecoatWindow
15 - 30 min.
Strengths
Can be applied over bare or painted surfaces.
Abrasion, chemical and impact resistant.
Application Tips
Use tools provided in kit.
Clean-up*
Xylol orMineral Spirits
R U S T - O L E U M® R O A d W A R R I O R®
*Xylol - wet or dry paint. Mineral spirits - wet paint.