Runway DIY Portable peplum steps xs

click through for the steps to

DIY Portable Peplum

start by laying down your fabric -

.5 yards wide and a length that is

about your waist x2.

apply some fabric glue down

each of the short sides & fold

over to prevent fraying.

fold in half length-wise with the

wrong side of the fabric facing out.

glue along the inside of the

band along the dotted line.

once the glue is dry, flip

the band right-side-out.

slide the belt in flat along

the top of the band.

secure with a dab of glue

on the inside of the X.

fold fabric toward the

buckle to create pleats.

secure each pleat with glue on

the fabric and a stitch through

both sides right beneath the belt.

runwaydiy.com