This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Fixture Type
Job Name
Running Magnet 2.0 RecessedHigh-tech LED lighting system for interior architecture
Description
Fun with magnets and light. Simultaneously graphic and subtle, the Running Magnet isflexible, precise, and as creative as you. It is track lighting redesigned and elegantly refined.Light elements snap in place and connect automatically though the magic of magnets.Extruded aluminum housings create a clean 1-3/8-inch slot and preconfigured cornerscomplete the system that can run up, around and across walls and ceilings. Finishes alignperfectly, always, because Running Magnet can be easily cut on site (except SuspensionUp&Down). Linear LED and accent fixtures, available in a variety of sizes, can be exchangedand repositioned quickly, without tools, with artistic results. The Running Magnet is perfectfor retail displays where frequent changes are typical and absolute performance is mandatory.
The extruded aluminum housing creates a clean 1-3/8” slot that can be run up, around and across walls and ceilings. Vertical and horizontal corners complete thesystem. The magnetic luminaries are simply installed by insertion. Linear tracks are available in two versions: power feed profiles for connecting to a driver, andintermediate profiles. End caps and connection cables are included with each power feed profile. Internal foam for opening support should not be removed untilafter installation.
Horizontal corners available for 90° turns in the same plane, inside corner to transition from wall to ceiling or from wall to wall and external corners to transition from wall to wall surfaces or around soffits. Corners are prepared to feed a structure in both directions without the need of a feed profile.
Length
FEED INTERMEDIATE (SEE TABLE)
Part Number FeedUnit Profile
06.1639.14.9059’’ (1.5m)
06.1640.14.9078.7 (2m)
06.1638.14.9039.4’’ (1m)
06.1644.14.90
06.1645.14.90
06.1643.14.90
Part NumberIntermediate Profile
Both profile types can be cut to different lengths in field.
Horizontal Corner
06.1648.14.90 06.1650.14.90 06.1651.14.90
Inside Corner Outside Corner
3.4
‘‘[8
6 m
m]
1.4‘‘[35.0 mm]
4.9‘‘[125 mm]
5.9‘‘
[150mm]
5.9‘‘
[150mm]
3.15‘‘
[80mm]
3.15‘‘[80mm]
5.9‘‘[150mm]
5.9‘‘[150mm]
Light Strip Module HE Find Me SuspensionSpot 120Spot Module Multi Spot Mini Glo-Ball
• Linear Hight Efficency LED can berapidly exchanged and repositionedwithout tools. Light elements are quickto position and connect automatically with magnets.• Built-in dimming switch dims fixturewith allen key from 20-100%, DALI and0-10V.• Clear end caps included for continuouslook when installing end-to-end.
• Accent LED Spot modules can berapidly exchanged and repositionedwithout tools.• Light elements are quick to positionand connect automatically with magnets• Built-in dimming knob dims fixturefrom 20-100%, DALI and 0-10V• Standard beam spread is 14°• Additional interchangeable lensesavailable in 27° and 36°, and 10° x 42°elliptical beam spread
• Decorative modules canbe rapidly exchanged andrepositioned withouttools. Light elements arequick to position andconnect with magnets• Built-in dimming knoballows fixture to dim from20-100%, DALI and 0-10V
• Accent lighting LED module tobe installed in The Running Magnet 2.0 System• Built-in DC/DC electronic voltage converter.• Built-in dimming knob dims fixture from 39-100%, DALI and 0-10V• Standard beam spread are 24º and 33º• Honeycomb and cross baffle included
goza goza goza
Fixture Type
Job Name
Running Magnet 2.0 RecessedHigh-tech LED lighting system for interior architecture
F L O S . U S A1 1O Yor k St reetBrook lyn , NY 1 120 1( 7 1 8 ) . 8 7 5 . 3 4 7 2
Linear High Efficency LED can be rapidly exchanged and repositioned without tools. Light elements are quick to position and connect automatically withmagnets. Built-in dimming knob dims fixture from 20-100%, DALI and 0-10V. Clear end caps included for continuous look when installing end-to-end.
Accent LED Spot modules can be rapidly exchanged and repositioned without tools. Light elements are quick to position and connect automatically with magnets.Built-in dimming knob dims fixture from 20-100%, DALI and 0-10V. Standard beam spread is 14°. Additional interchangeable lenses available in 27° and 36°, and10° x 42° elliptical beam spread.
90º
360º
Optional Accessories
08.8760.00
08.8761.00
08.8759.00
08.8427.14
Flood Lens Accessory 23°
Wide Flood Lens Accessory 33°
Elliptical Lens Accessory
Extra long snoot for added shielding in aluminum with black finish (does not protude from channel when tucked up into housing)
Initial Lumen
CRI CCT DeliveredLumen
418
404
600903000
550902700
8
550
14º
14º
03.6302.14A90 03.6302.14ADD 03.6302.14A9V
03.6303.14A90 03.6303.14ADD 03.6303.14A9V
Watts BeamSpread
Part Number Dimmable on board
Part Number DALI-Dimming
Photometric
30°
60°
90°
30°
60°
90°
6199 Cd/Klm
E(lx/Klm)D (m)
h(m) 21°
1
2
3
4
5
6199
1550
689
387
248
0.37
0.74
1.11
1.48
1.85
2.8
‘‘1.
3‘‘
[72
mm
][3
4 m
m]SEE TABLE
5.16‘‘[129 mm]
Part Number 0-10V Dimming
Fixture Type
Job Name
Running Magnet 2.0 RecessedHigh-tech LED lighting system for interior architecture
F L O S . U S A1 1O Yor k St reetBrook lyn , NY 1 120 1( 7 1 8 ) . 8 7 5 . 3 4 7 2
Decorative modules can be rapidly exchanged and repositioned without tools. Light elements are quick to position and connect automatically through the magic ofmagnets. Built-in dimming knob allows fixture to dim from 20-100%.
CCT
CCT
CCT
CRI
CRI
CRI
80
80
90
90
3000
2700
3000
2700
3000
3000
880 880
440 271
600 365
560 344
800 800
400 259
7
3.5
8 14º
8 14º
03.6261.14B90
03.6260.14B90
03.6263.14B90
03.6262.14B90
03.6273.30C90
03.6273.14C90
03.6273.06C90
03.6272.30C90
03.6272.14C90
03.6272.06C90
03.6261.14.DD
03.6260.14.DD
03.6261.14.9V
03.6260.14.9V
03.6263.14.DD
03.6262.14.DD
03.6263.14.9V
03.6262.14.9V
03.6273.30CDD 03.6273.30C9V
03.6273.14CDD 03.6273.14C9V
03.6273.06CDD 03.6273.06C9V
03.6272.30CDD 03.6272.30C9V
03.6272.14CDD 03.6272.14C9V
03.6272.06CDD 03.6272.06C9V
Initial Lumen Initial Lumen
Initial Lumen
Initial Lumen
DeliveredLumen
DeliveredLumen
Watts
Watts
Watts
Beam Spread
Beam Spread
Finish
Part Number Built-in Dimming
Part NumberDimmable on board
Part NumberDimmable on board
Part Number DALI-Dimming Part Number 0-10V Dimming
Part NumberDALI-Dimming
Part NumberDALI-Dimming
Part Number 0-10V Dimming
Part Number 0-10V Dimming
2.8‘‘
28‘‘
2.8‘‘
3.3‘‘
118‘‘
118‘‘
3.6‘‘
8.7‘‘
ø 4.3‘‘
ø 4.3‘‘
ø 1.3‘‘
[72 mm
]
[72 mm
]
[72 mm
]
[85 m
m]
[300
0 m
m]
MA
X.
[300
0 m
m]
MA
X.
[92 mm
]
[220 m
m]
[110 mm]
[110 mm][33 mm]
5.11‘‘[130 mm]
Mini Glo - Ball S
Find Me Suspension
14 = Black
06 = Chrome
30 = White
14 = Black
06 = Chrome
30 = White
5.07‘‘[129 mm]
5.11‘‘[130 mm]
Fixture Type
Job Name
Running Magnet 2.0 RecessedHigh-tech LED lighting system for interior architecture
F L O S . U S A1 1O Yor k St reetBrook lyn , NY 1 120 1( 7 1 8 ) . 8 7 5 . 3 4 7 2
1. Horizontal - Connect sections on flat surfaces (90º corner)2. Inside - Transition from wall to ceiling (inside corner)3. External - Turn outside corners for walls and soffits (270° corner)
B. Fill lengths between corners with Linear Housings
3’ or 6’ sections can be specified as feed or intermediate profiles. Profile can be easily cut to site to exact length and joined together.
C. Drivers
Quantity of drivers determined by total wattage or light elementsin section (approximately one every 10 feet). Maximum driver distance is 15’. Locate drivers nearby. DALI dimming hardwires into profile, bypasses driver.
D. Select Spot heads
Linear strips are available in five nominal lengths: 1’, 2’, 3’, 4’ and 5’. Individual units can be adjusted from 20-100% with on board switch, DALI and 0-10V
Visit FLOS Worldwide YouTube channel for installation videos