Destination Development International, Inc. Florida Design Office 561.847.0868 todd.mayfi[email protected] www.dditeam.com City of Rock Springs Wayfinding Program DD1039 Wayfinding Plan October, 2009
Jan 27, 2015
Destination Development International, Inc.Florida Design Office
City of Rock Springs Wayfinding Program
DD1039
Wayfinding Plan
October, 2009
Contents
Section 1
Project Summary.................................................
Section 2
Devices...............................................................
Sign Type Key.....................................................
Fonts...................................................................
Logos...................................................................
Colors & Finishes................................................
Section 3
Drawings.............................................................
Section 4
Location Plans....................................................
Section 5
Message Schedule..............................................
1.1
2.1
2.2
2.3
2.4
2.6
3.1
4.1
5.1
Project SummarySection 1
Project:
Sheet Description:
Project Number: Page:
DD1039
Wayfinding ProgramBid Documents
Phase
City of Rock Springs
Prepared for:
Date:
October, 2009
© 2009 Destination Development International, Inc. (DDI)
All rights reserved. This material is the property of DDI.
The recipient acknowledges that this material is
proprietary and agrees not to use or disclose this
material, or to make copies, without the written consent
of DDI, as long as the material remains confidential
and property known only by DDI and authorized
recipients. These drawings are meant for Design
Intent only and are not for construction. All
dimensions and site conditions shall be verified by
the Sign Contractor. DDI shall be notified of any
and all discrepancies, variations or substitutions
from these documents. Shop drawings, specification
details and samples shall be submitted to DDI
for approval prior to proceeding with fabrication.
All copy shall be proofread by the client and
legal requirements checked by their legal counsel.
Destination Development International, Inc.Florida Design Office 561.847.0868www.destinationdevelopment.com
1.1
Section 1 Project Summary
Project Summary
This document includes drawings and specifications for the preparation of bids to fabricate and install
Phase 1 of a wayfinding system for the City of Rock Springs, Wyoming. This Bid Document represents
Destination Development’s Design Intent and shall not be used as shop drawings. It is a communication
device for prospective bidders to understand the form and function of elements that constitute exterior
sign elements. From this Bid Document, the prospective bidder shall formulate and submit their bid to
fabricate, deliver and install all items required to fulfill the contracted scope of work as described in an RFP
produced under separate cover by the City of Rock Springs.
The successful bidder will receive updated documents including revised location plans, an updated
message schedule, final quantities and approved versions of those signs with more than one option. These
revised documents will be known as the Contract Documents. After project award, the Sign Contractor will
submit a revised scope fee based on unit costs included in their winning bid.
Access to the project FTP will be given to the contracted sign vendor to download production art and
relative project files for use in fabrication.
Section 2 DevicesSign Type KeyFontsLogosColors & Finishes
Project:
Sheet Description:
Project Number: Page:
DD1039
Wayfinding ProgramBid Documents
Phase
City of Rock Springs
Prepared for:
Date:
October, 2009
© 2009 Destination Development International, Inc. (DDI)
All rights reserved. This material is the property of DDI.
The recipient acknowledges that this material is
proprietary and agrees not to use or disclose this
material, or to make copies, without the written consent
of DDI, as long as the material remains confidential
and property known only by DDI and authorized
recipients. These drawings are meant for Design
Intent only and are not for construction. All
dimensions and site conditions shall be verified by
the Sign Contractor. DDI shall be notified of any
and all discrepancies, variations or substitutions
from these documents. Shop drawings, specification
details and samples shall be submitted to DDI
for approval prior to proceeding with fabrication.
All copy shall be proofread by the client and
legal requirements checked by their legal counsel.
Destination Development International, Inc.Florida Design Office 561.847.0868www.destinationdevelopment.com
2.1
14.5
14.5
14.5
14.5
14.5
Section 2 Devices
Indicates an alternateelevation or detail.
Indicates an area that hasbeen blown up and detailed.
Indicates an alternatepoint of view.
Indicates section view.Top figure representsdrawing number and bottom figure represents page where drawing is located.
General Specification.
Specification call-out.
Sign location call-out.
Indicates drawing number, drawing title and scale.
Ø 9”
R=41/2
90º
1’-0”
EQ EQ
5
Indicates diameter
Indicates radius
Indicates angle
Indicates dimension
Indicates equal measurement.
Indicates center line.
Indicates revised portionof a drawing.
A4.5
Indicates match line.Matching edge (top letter).Page location (bottom number).
Hidden object line(.5 pt. thickness).
Visible object line(.5 pt. thickness).
Section or emphasis line(1 pt. thickness).
Grade or mounting surface line (2 pt. thickness).
Scale Figures.
Specificationmessage
Indicates drawing break
1 FRONT VIEWSCALE: 1”=1’-0”
14.5
Color/Finish call-out.P5
3
A1.2
Project:
Sheet Description:
Project Number: Page:
DD1039
Wayfinding ProgramBid Documents
Phase
City of Rock Springs
Prepared for:
Date:
October, 2009
© 2009 Destination Development International, Inc. (DDI)
All rights reserved. This material is the property of DDI.
The recipient acknowledges that this material is
proprietary and agrees not to use or disclose this
material, or to make copies, without the written consent
of DDI, as long as the material remains confidential
and property known only by DDI and authorized
recipients. These drawings are meant for Design
Intent only and are not for construction. All
dimensions and site conditions shall be verified by
the Sign Contractor. DDI shall be notified of any
and all discrepancies, variations or substitutions
from these documents. Shop drawings, specification
details and samples shall be submitted to DDI
for approval prior to proceeding with fabrication.
All copy shall be proofread by the client and
legal requirements checked by their legal counsel.
Destination Development International, Inc.Florida Design Office 561.847.0868www.destinationdevelopment.com
2.2
Section 2 Sign Type Key
Type Description
A1.0 Identification
B1.0 Banner
D1.0 Directory
E1.0 Exhibit, Interpretive
F1.0 Flag, Pennant
G1.0 Gateway
H1.0 Accessible
K1.0 Kiosk, Interactive
P1.0 Pedestrian Directional
R1.0 Regulatory
V1.0 Vehicular Directional
Z1.0 Garnish, Decorative
Identifies Graphic Variation
Indicates Form
Indicates Function
Sign Face (B)
A1.1
Sign Location Call-outFor use on location plans
Sign Face (A)
A
B
G
F
P
D
H
M
K
R
V
Z
Project:
Sheet Description:
Project Number: Page:
DD1039
Wayfinding ProgramBid Documents
Phase
City of Rock Springs
Prepared for:
Date:
October, 2009
© 2009 Destination Development International, Inc. (DDI)
All rights reserved. This material is the property of DDI.
The recipient acknowledges that this material is
proprietary and agrees not to use or disclose this
material, or to make copies, without the written consent
of DDI, as long as the material remains confidential
and property known only by DDI and authorized
recipients. These drawings are meant for Design
Intent only and are not for construction. All
dimensions and site conditions shall be verified by
the Sign Contractor. DDI shall be notified of any
and all discrepancies, variations or substitutions
from these documents. Shop drawings, specification
details and samples shall be submitted to DDI
for approval prior to proceeding with fabrication.
All copy shall be proofread by the client and
legal requirements checked by their legal counsel.
Destination Development International, Inc.Florida Design Office 561.847.0868www.destinationdevelopment.com
2.3
Section 2 Fonts
Formata Light
ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890
Formata Regular
ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890
Formata Medium
ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890
Used for credit information where a logo mark or sponsor graphic is not appropriate.
Used for directional and informational text.
Used to emphasize a regulatory message anddimensional letters on identity/gateway signage.
Project:
Sheet Description:
Project Number: Page:
DD1039
Wayfinding ProgramBid Documents
Phase
City of Rock Springs
Prepared for:
Date:
October, 2009
© 2009 Destination Development International, Inc. (DDI)
All rights reserved. This material is the property of DDI.
The recipient acknowledges that this material is
proprietary and agrees not to use or disclose this
material, or to make copies, without the written consent
of DDI, as long as the material remains confidential
and property known only by DDI and authorized
recipients. These drawings are meant for Design
Intent only and are not for construction. All
dimensions and site conditions shall be verified by
the Sign Contractor. DDI shall be notified of any
and all discrepancies, variations or substitutions
from these documents. Shop drawings, specification
details and samples shall be submitted to DDI
for approval prior to proceeding with fabrication.
All copy shall be proofread by the client and
legal requirements checked by their legal counsel.
Destination Development International, Inc.Florida Design Office 561.847.0868www.destinationdevelopment.com
2.4
Section 2 GraphicsCity Logo
Graphic files for sign production shown on this page will be available for download upon award of contract. Email [email protected] to request access information.
EggplantPMS 5135 C
100%
70%
40%
15%
Burnt OrangePMS 7413 C
100%
70%
40%
15%
TurquoisePMS 7473 C
100%
70%
40%
15%
GoldPMS 142 C
100%
70%
40%
15%
= Logo Clearspace No Graphic, image pattern or watermark shall invade the logo clearspace.
Colors The logo must be reproduced with 100% value of the 4 colors in the logo color palette. Screen percentages can be used as graphic compliments.
Project:
Sheet Description:
Project Number: Page:
DD1039
Wayfinding ProgramBid Documents
Phase
City of Rock Springs
Prepared for:
Date:
October, 2009
© 2009 Destination Development International, Inc. (DDI)
All rights reserved. This material is the property of DDI.
The recipient acknowledges that this material is
proprietary and agrees not to use or disclose this
material, or to make copies, without the written consent
of DDI, as long as the material remains confidential
and property known only by DDI and authorized
recipients. These drawings are meant for Design
Intent only and are not for construction. All
dimensions and site conditions shall be verified by
the Sign Contractor. DDI shall be notified of any
and all discrepancies, variations or substitutions
from these documents. Shop drawings, specification
details and samples shall be submitted to DDI
for approval prior to proceeding with fabrication.
All copy shall be proofread by the client and
legal requirements checked by their legal counsel.
Destination Development International, Inc.Florida Design Office 561.847.0868www.destinationdevelopment.com
2.5
Section 2 GraphicsChamber Logo
Graphic files for sign production shown on this page will be available for download upon award of contract. Email [email protected] to request access information.
EggplantPMS 5135 C
100%
70%
40%
15%
Burnt OrangePMS 7413 C
100%
70%
40%
15%
TurquoisePMS 7473 C
100%
70%
40%
15%
GoldPMS 142 C
100%
70%
40%
15%
= Logo Clearspace No Graphic, image pattern or watermark shall invade the logo clearspace
Colors The logo must be reproduced with 100% value of the 4 colors in the logo color palette. Screen percentages can be used as graphic compliments.
Project:
Sheet Description:
Project Number: Page:
DD1039
Wayfinding ProgramBid Documents
Phase
City of Rock Springs
Prepared for:
Date:
October, 2009
© 2009 Destination Development International, Inc. (DDI)
All rights reserved. This material is the property of DDI.
The recipient acknowledges that this material is
proprietary and agrees not to use or disclose this
material, or to make copies, without the written consent
of DDI, as long as the material remains confidential
and property known only by DDI and authorized
recipients. These drawings are meant for Design
Intent only and are not for construction. All
dimensions and site conditions shall be verified by
the Sign Contractor. DDI shall be notified of any
and all discrepancies, variations or substitutions
from these documents. Shop drawings, specification
details and samples shall be submitted to DDI
for approval prior to proceeding with fabrication.
All copy shall be proofread by the client and
legal requirements checked by their legal counsel.
Destination Development International, Inc.Florida Design Office 561.847.0868www.destinationdevelopment.com
2.6
Section 2 Colors & Finishes
Code
-
Description
-
Color / Finish / Specification
-
Manufacturer
-P1
P2
P3
P4
P5
P6
P7
P8
P9
P10
P11
P12
M1
D1
D2
D3
V1
V2
V3
Exterior Enamel
Exterior Enamel
Exterior Enamel
Exterior Enamel
Exterior Enamel
Exterior Enamel
Exterior Enamel
Exterior Enamel
Exterior Enamel
Exterior Enamel
Exterior Enamel
Exterior Enamel
Stainless Steel
Exterior Insulation and Finish Systems (EIFS)
Exterior Insulation and Finish Systems (EIFS)
Exterior Insulation and Finish Systems (EIFS)
Reflective Vinyl
Vinyl
Translucent Vinyl
Eggplant MP08822
Eggplant MP08822*
Turquoise MP14544
Turquoise MP14544*
Burnt Orange MP00855
Burnt Orange MP00855*
Gold MP07238
Gold MP07238*
Semi-gloss Black
Silver MP18071
Cream MP05575
Coffee MP03265
Polished
103 Natural White
115 Beach
389 Southern Tan
A7801-R White
A9001-O White
A6607-T Tidewater
Matthews Paint
Matthews Paint (custom)
Matthews Paint
Matthews Paint (custom)
Matthews Paint
Matthews Paint (custom)
Matthews Paint
Matthews Paint (custom)
Fabricator’s Source, Subject to Designer’s Approval
Matthews Paint
Matthews Paint
Matthews Paint
Industry Standard
Dryvit Systems
Dryvit Systems
Dryvit Systems
Avery
Avery
Avery
Section 3 Drawings
Project:
Sheet Description:
Project Number: Page:
DD1039
Wayfinding ProgramBid Documents
Phase
City of Rock Springs
Prepared for:
Date:
October, 2009
© 2009 Destination Development International, Inc. (DDI)
All rights reserved. This material is the property of DDI.
The recipient acknowledges that this material is
proprietary and agrees not to use or disclose this
material, or to make copies, without the written consent
of DDI, as long as the material remains confidential
and property known only by DDI and authorized
recipients. These drawings are meant for Design
Intent only and are not for construction. All
dimensions and site conditions shall be verified by
the Sign Contractor. DDI shall be notified of any
and all discrepancies, variations or substitutions
from these documents. Shop drawings, specification
details and samples shall be submitted to DDI
for approval prior to proceeding with fabrication.
All copy shall be proofread by the client and
legal requirements checked by their legal counsel.
Destination Development International, Inc.Florida Design Office 561.847.0868www.destinationdevelopment.com
3.1
3/8”=1’-0”1/4”=1’-0”3/16”=1’-0”1/8”=1’-0”
General Drawing Line - .5 pt.
Minor Detail Line - .25 pt.
Grade / Mounting Surface Line - 2 pt.
Ghost Line - .25 pt.
Perimeter / Section / Emphasis Line - 1 pt.WHITE MTN BLVD
MOUNTAIN RD
GATEWAY BLVD
Project: DD1039 Rock SpringsSign Type: A1-A2Description: Elevation Scale: 1/2”=1’-0”
14” Ornamental BaseHooks & Latticehttp://www.hooksandlattice.com/ornamental-cast-base.html
3'-6" 3'-6"
5'-5"
6"
6"
9'-0"
9'-6 1/2"
2"
1'-6"
Section 3Drawings A1 and A2Elevations and Sections
3 FRONT ELEVATION - A2SCALE: 1/2”=1’-0”
4 SIDE ELEVATIONSCALE: 1/2”=1’-0”
6 P9
2
43.1
1 FRONT ELEVATION - A1SCALE: 1/2”=1’-0”
2 SIDE ELEVATIONSCALE: 1/2”=1’-0”
2
2
3
4 P9
P3
Existing overhead signal light arm.
.125” thick aluminum sheet. Edges finished smooth.
Band strap and bracket assembly.
Round steel pole. (city to provide and install).
90º Sign-to-sign pole bracket (by city).
Round pole bracket (by city).
Finish with primer and Matthews enamel paint. See chart on page 2.6
NOTE: Sign Contractor shall fabricate and deliver all street identity signs to city. City shall provide and install poles and brackets.
1
2
3
P-
1
23.1
5P9
4
5
6
5
Project:
Sheet Description:
Project Number: Page:
DD1039
Wayfinding ProgramBid Documents
Phase
City of Rock Springs
Prepared for:
Date:
October, 2009
© 2009 Destination Development International, Inc. (DDI)
All rights reserved. This material is the property of DDI.
The recipient acknowledges that this material is
proprietary and agrees not to use or disclose this
material, or to make copies, without the written consent
of DDI, as long as the material remains confidential
and property known only by DDI and authorized
recipients. These drawings are meant for Design
Intent only and are not for construction. All
dimensions and site conditions shall be verified by
the Sign Contractor. DDI shall be notified of any
and all discrepancies, variations or substitutions
from these documents. Shop drawings, specification
details and samples shall be submitted to DDI
for approval prior to proceeding with fabrication.
All copy shall be proofread by the client and
legal requirements checked by their legal counsel.
Destination Development International, Inc.Florida Design Office 561.847.0868www.destinationdevelopment.com
3.2
3/8”=1’-0”1/4”=1’-0”3/16”=1’-0”1/8”=1’-0”
General Drawing Line - .5 pt.
Minor Detail Line - .25 pt.
Grade / Mounting Surface Line - 2 pt.
Ghost Line - .25 pt.
Perimeter / Section / Emphasis Line - 1 pt.
MOUNTAIN RD
GATEWAY BLVD
Project: DD1039 Rock SpringsSign Type: A1-A2Description: GraphicsScale: 1/2”=1’-0”
1 1/2"5 1/2"5"
1/2" 1"3 1/2"
Section 3Drawings A1 and A2Graphics
1 GRAPHIC DETAIL - A1SCALE: 1”=1’-0”
V1
P3
P4
2 GRAPHIC DETAIL - A2SCALE: 1”=1’-0”
V1
P3
P4
Finish with primer and Matthews enamel paint. See chart on page 2.6
Exterior grade vinyl. See chart on page 2.6
P-
V-
5
Project:
Sheet Description:
Project Number: Page:
DD1039
Wayfinding ProgramBid Documents
Phase
City of Rock Springs
Prepared for:
Date:
October, 2009
© 2009 Destination Development International, Inc. (DDI)
All rights reserved. This material is the property of DDI.
The recipient acknowledges that this material is
proprietary and agrees not to use or disclose this
material, or to make copies, without the written consent
of DDI, as long as the material remains confidential
and property known only by DDI and authorized
recipients. These drawings are meant for Design
Intent only and are not for construction. All
dimensions and site conditions shall be verified by
the Sign Contractor. DDI shall be notified of any
and all discrepancies, variations or substitutions
from these documents. Shop drawings, specification
details and samples shall be submitted to DDI
for approval prior to proceeding with fabrication.
All copy shall be proofread by the client and
legal requirements checked by their legal counsel.
Destination Development International, Inc.Florida Design Office 561.847.0868www.destinationdevelopment.com
3.3
3/8”=1’-0”1/4”=1’-0”3/16”=1’-0”1/8”=1’-0”
H I S TO R I C A L D I S T R I C T
H I S TO R I C A L D I S T R I C T
General Drawing Line - .5 pt.
Minor Detail Line - .25 pt.
Grade / Mounting Surface Line - 2 pt.
Ghost Line - .25 pt.
Perimeter / Section / Emphasis Line - 1 pt.
BROADWAY STRENNIE ST
D ST
Project: DD1039 Rock SpringsSign Type: A3-A4-A5Description: Elevation Scale: 1/2”=1’-0”
14” Ornamental BaseHooks & Latticehttp://www.hooksandlattice.com/ornamental-cast-base.html
6"
1 1/2"
2 1/2"
6"
3'-6"
2'-6" 3'-6"
2'-6"
3'-6"
6"
9'-6 1/2"
9'-0"
2"Section 3Drawings A3, A4 and A5Elevations
.125” thick aluminum sheet. Edges finished smooth.
Band strap and bracket assembly.
Metro Wing #800 Bracket Deluxewith strapping bands.
Existing street lamp.
Round steel pole.
90º Sign-to-sign pole bracket.
Round pole bracket
Finish with primer and Matthews enamel paint. See chart on page 2.6
NOTE: Sign Contractor shall fabricate and deliver all street identity signs to city. City shall provide and install poles and brackets.
1
2
3
4
5
3 FRONT ELEVATION - A5SCALE: 1/2”=1’-0”
5 P9
1
23.3
1 FRONT ELEVATION - A3SCALE: 1/2”=1’-0”
2 SIDE ELEVATION - A4SCALE: 1/2”=1’-0”
4
1
3 P91
P-
6
7
7 P9 7 P9
6 P9
5
Project:
Sheet Description:
Project Number: Page:
DD1039
Wayfinding ProgramBid Documents
Phase
City of Rock Springs
Prepared for:
Date:
October, 2009
© 2009 Destination Development International, Inc. (DDI)
All rights reserved. This material is the property of DDI.
The recipient acknowledges that this material is
proprietary and agrees not to use or disclose this
material, or to make copies, without the written consent
of DDI, as long as the material remains confidential
and property known only by DDI and authorized
recipients. These drawings are meant for Design
Intent only and are not for construction. All
dimensions and site conditions shall be verified by
the Sign Contractor. DDI shall be notified of any
and all discrepancies, variations or substitutions
from these documents. Shop drawings, specification
details and samples shall be submitted to DDI
for approval prior to proceeding with fabrication.
All copy shall be proofread by the client and
legal requirements checked by their legal counsel.
Destination Development International, Inc.Florida Design Office 561.847.0868www.destinationdevelopment.com
3.4
3/8”=1’-0”1/4”=1’-0”3/16”=1’-0”1/8”=1’-0”
General Drawing Line - .5 pt.
Minor Detail Line - .25 pt.
Grade / Mounting Surface Line - 2 pt.
Ghost Line - .25 pt.
Perimeter / Section / Emphasis Line - 1 pt.
H I S TO R I C A L D I S T R I C T
BROADWAY ST
H I S TO R I C A L D I S T R I C T
RENNIE ST
D ST
Project: DD1039 Rock SpringsSign Type: A3-A4-A5Description: GraphicsScale: 1/2”=1’-0”
14” Ornamental BaseHooks & Latticehttp://www.hooksandlattice.com/ornamental-cast-base.html
1 1/4"1/2" 1"
1 1/8"3 1/2"
1 1/4"1/2" 1"
1 1/8"3 1/2"
1/2" 1"3 1/2"
Section 3Drawings A3, A4 and A5Graphics
1 GRAPHIC DETAIL - A5SCALE: 1”=1’-0”
V1
P1
P9
2 GRAPHIC DETAIL - A3SCALE: 1”=1’-0”
V1
P1
V2
3 GRAPHIC DETAIL - A4SCALE: 1”=1’-0”
P9
V1
P1
V2P6
Finish with primer and Matthews enamel paint. See chart on page 2.6
Exterior grade vinyl. See chart on page 2.6
P-
V-
5
Project:
Sheet Description:
Project Number: Page:
DD1039
Wayfinding ProgramBid Documents
Phase
City of Rock Springs
Prepared for:
Date:
October, 2009
© 2009 Destination Development International, Inc. (DDI)
All rights reserved. This material is the property of DDI.
The recipient acknowledges that this material is
proprietary and agrees not to use or disclose this
material, or to make copies, without the written consent
of DDI, as long as the material remains confidential
and property known only by DDI and authorized
recipients. These drawings are meant for Design
Intent only and are not for construction. All
dimensions and site conditions shall be verified by
the Sign Contractor. DDI shall be notified of any
and all discrepancies, variations or substitutions
from these documents. Shop drawings, specification
details and samples shall be submitted to DDI
for approval prior to proceeding with fabrication.
All copy shall be proofread by the client and
legal requirements checked by their legal counsel.
Destination Development International, Inc.Florida Design Office 561.847.0868www.destinationdevelopment.com
3.5
3/8”=1’-0”1/4”=1’-0”3/16”=1’-0”1/8”=1’-0”
General Drawing Line - .5 pt.
Minor Detail Line - .25 pt.
Grade / Mounting Surface Line - 2 pt.
Ghost Line - .25 pt.
Perimeter / Section / Emphasis Line - 1 pt.
Project: DD1039 Rock SpringsSign Type: A5, A6 and A9Description: Elevation Scale: 1/2”=1’-0”
14” Ornamental BaseHooks & Latticehttp://www.hooksandlattice.com/ornamental-cast-base.html
7'-0"
7'-0"
1'-8"
2'-2"
2'-3" 1'-8"
2" 2"
9'-1"
8'-7"
2" 6'-0"
1'-0"
1'-9"
Section 3Drawings A6, A7 and A11Elevations
1 FRONT ELEV-A6SCALE: 1/2”=1’-0”
2 SIDE ELEVSCALE: 1/2”=1’-0”
2 P9
1
2 P9
1
3 FRONT ELEV-A7SCALE: 1/2”=1’-0”
4 SIDE ELEVSCALE: 1/2”=1’-0”
23.5
43.5
.125” thick aluminum sheet. Edges finished smooth.
Round steel pole.
Through-bolt welded to sign panel and fastened through round pole with tamper proof nut. Exposed nut and bolt painted to match pole color. Back of sign panels painted to match front background color.
Finish with primer and Matthews enamel paint. See chart on page 2.6
1
2
3
P-
3
3
2 P92 P9
2 P9
2 P91
3
63.5
5 FRONT ELEV-A11SCALE: 1/2”=1’-0”
6 SIDE ELEVSCALE: 1/2”=1’-0”
1 and 6
Project:
Sheet Description:
Project Number: Page:
DD1039
Wayfinding ProgramBid Documents
Phase
City of Rock Springs
Prepared for:
Date:
October, 2009
© 2009 Destination Development International, Inc. (DDI)
All rights reserved. This material is the property of DDI.
The recipient acknowledges that this material is
proprietary and agrees not to use or disclose this
material, or to make copies, without the written consent
of DDI, as long as the material remains confidential
and property known only by DDI and authorized
recipients. These drawings are meant for Design
Intent only and are not for construction. All
dimensions and site conditions shall be verified by
the Sign Contractor. DDI shall be notified of any
and all discrepancies, variations or substitutions
from these documents. Shop drawings, specification
details and samples shall be submitted to DDI
for approval prior to proceeding with fabrication.
All copy shall be proofread by the client and
legal requirements checked by their legal counsel.
Destination Development International, Inc.Florida Design Office 561.847.0868www.destinationdevelopment.com
3.63/8”=1’-0”1/4”=1’-0”3/16”=1’-0”1/8”=1’-0”
General Drawing Line - .5 pt.
Minor Detail Line - .25 pt.
Grade / Mounting Surface Line - 2 pt.
Ghost Line - .25 pt.
Perimeter / Section / Emphasis Line - 1 pt.
Project: DD1039 Rock SpringsSign Type: A5, A6 and A11Description: Graphic DetailsScale: 1”=1’-0”
6 3/4"11 1/2"
4"11 1/4"
33
Historic Tour
4 1/2"
1'-1 1/2"
2 1/4"2"
2 3/4"3 1/2"
6 1/4" 2"
Section 3Drawings A6, A7 and A11Graphics
1 GRAPHIC DETAIL - A6SCALE: 1”=1’-0”
P1
P7
P7
P3
P1
V2
P5
V1
P5
2 GRAPHIC DETAIL - A7SCALE: 1”=1’-0”
Entire image applied as a color digital vinyl with maximum UV tolorance and durability.
Finish with primer and Matthews enamel paint. See chart on page 2.6
Exterior grade vinyl. See chart on page 2.6
P-
V-
3 GRAPHIC DETAIL - A11SCALE: 1”=1’-0”
P3
P7
P7
V1
P1P9
1
1 and 6
Project:
Sheet Description:
Project Number: Page:
DD1039
Wayfinding ProgramBid Documents
Phase
City of Rock Springs
Prepared for:
Date:
October, 2009
© 2009 Destination Development International, Inc. (DDI)
All rights reserved. This material is the property of DDI.
The recipient acknowledges that this material is
proprietary and agrees not to use or disclose this
material, or to make copies, without the written consent
of DDI, as long as the material remains confidential
and property known only by DDI and authorized
recipients. These drawings are meant for Design
Intent only and are not for construction. All
dimensions and site conditions shall be verified by
the Sign Contractor. DDI shall be notified of any
and all discrepancies, variations or substitutions
from these documents. Shop drawings, specification
details and samples shall be submitted to DDI
for approval prior to proceeding with fabrication.
All copy shall be proofread by the client and
legal requirements checked by their legal counsel.
Destination Development International, Inc.Florida Design Office 561.847.0868www.destinationdevelopment.com
3.7
3/8”=1’-0”1/4”=1’-0”3/16”=1’-0”1/8”=1’-0”
4'-0"
General Drawing Line - .5 pt.
Minor Detail Line - .25 pt.
Grade / Mounting Surface Line - 2 pt.
Ghost Line - .25 pt.
Perimeter / Section / Emphasis Line - 1 pt.
8"
Project: DD1039 Rock SpringsSign Type: A7Description: Elevation and plan viewScale: 1/4”=1’-0”
9'-10"
14'-0"
39°
3'-0"
3'-0"
6'-0"
1" 2"
5"
30’-0"
2'-9"
1'-3"
Section 3Drawings A8 and F1 - Option 1Elevations
1 FRONT ELEVATIONSCALE: 1/2”=1’-0”
2 PLAN VIEWSCALE: 1/2”=1’-0”
2 D1
5
4
1
1 3
5 2 D1
7
23.9
23.7
4
6
Reverse channel logo made with .080” thick fabricated aluminum sheet. Edges finished smooth.
ALTERNATE: .25” thick aluminum plate, lasor-cut.
Sign wall. Stacked and filled concrete block, finished with Dryvit.
All-thread standoffs with PVC sleeve.Painted to match mounting surface.
LED solar powered flood light.
Deconstructed edge. Fill with concrete and cover with matching Dryvit.
Solar collectors.
White fiberglass flagpole.
Finish with EIFS. See chart on page 2.6
1
2
3
4
5
6
D-
7
2
Project:
Sheet Description:
Project Number: Page:
DD1039
Wayfinding ProgramBid Documents
Phase
City of Rock Springs
Prepared for:
Date:
October, 2009
© 2009 Destination Development International, Inc. (DDI)
All rights reserved. This material is the property of DDI.
The recipient acknowledges that this material is
proprietary and agrees not to use or disclose this
material, or to make copies, without the written consent
of DDI, as long as the material remains confidential
and property known only by DDI and authorized
recipients. These drawings are meant for Design
Intent only and are not for construction. All
dimensions and site conditions shall be verified by
the Sign Contractor. DDI shall be notified of any
and all discrepancies, variations or substitutions
from these documents. Shop drawings, specification
details and samples shall be submitted to DDI
for approval prior to proceeding with fabrication.
All copy shall be proofread by the client and
legal requirements checked by their legal counsel.
Destination Development International, Inc.Florida Design Office 561.847.0868www.destinationdevelopment.com
3.8
3/8”=1’-0”1/4”=1’-0”3/16”=1’-0”1/8”=1’-0”
4'-0"
General Drawing Line - .5 pt.
Minor Detail Line - .25 pt.
Grade / Mounting Surface Line - 2 pt.
Ghost Line - .25 pt.
Perimeter / Section / Emphasis Line - 1 pt.
8"
Project: DD1039 Rock SpringsSign Type: A7Description: Elevation and plan viewScale: 1/4”=1’-0”
9'-10"
14'-0"
39°
3'-0"
3'-0"
6'-0"
1"
5"
30’-0"
2'-9"
1'-3"
Section 3Drawings A8 and F1 - Option 2Elevations
1 FRONT ELEVATIONSCALE: 1/2”=1’-0”
2 PLAN VIEWSCALE: 1/2”=1’-0”
2 D1
5
4
1
1 3
5 2 D1
7
23.10
23.8
4
6
.25” thick aluminum plate. Edges finished smooth, pin-mounted 1” from wall.
ALTERNATE: .25” thick aluminum plate, lasor-cut.
Sign wall. Stacked and filled concrete block, finished with Dryvit.
All-thread standoffs with PVC sleeve.Painted to match mounting surface.
LED solar powered flood light.
Deconstructed edge. Fill with concrete and cover with matching Dryvit.
Solar collectors.
White fiberglass flagpole.
Finish with EIFS. See chart on page 2.6
1
2
3
4
5
6
D-
7
2
Project:
Sheet Description:
Project Number: Page:
DD1039
Wayfinding ProgramBid Documents
Phase
City of Rock Springs
Prepared for:
Date:
October, 2009
© 2009 Destination Development International, Inc. (DDI)
All rights reserved. This material is the property of DDI.
The recipient acknowledges that this material is
proprietary and agrees not to use or disclose this
material, or to make copies, without the written consent
of DDI, as long as the material remains confidential
and property known only by DDI and authorized
recipients. These drawings are meant for Design
Intent only and are not for construction. All
dimensions and site conditions shall be verified by
the Sign Contractor. DDI shall be notified of any
and all discrepancies, variations or substitutions
from these documents. Shop drawings, specification
details and samples shall be submitted to DDI
for approval prior to proceeding with fabrication.
All copy shall be proofread by the client and
legal requirements checked by their legal counsel.
Destination Development International, Inc.Florida Design Office 561.847.0868www.destinationdevelopment.com
3.9
Curved wall. Stacked and filled concrete block, finished with Dryvit.
Steel rebar.
LED solar powered flood light.
Concrete foundation.
Solar collectors.
Grade
All-thread standoffs with PVC sleeve.Painted to match mounting surface.
Reverse channel logo made with .080” thick aluminum sheet. Edges finished smooth.
White fiberglass flagpole.
Concrete foundation. To match flagpole manufacturer’s specs. Sign Fabricator shall include engineered details in their shop drawings.
3/8”=1’-0”1/4”=1’-0”3/16”=1’-0”1/8”=1’-0”
General Drawing Line - .5 pt.
Minor Detail Line - .25 pt.
Grade / Mounting Surface Line - 2 pt.
Ghost Line - .25 pt.
Perimeter / Section / Emphasis Line - 1 pt.
8”x8”X16” SINGLE BN CONCRETE BRICK
8"
4'-6"
8"1'-
2"
3'-0"6'-0"
Project: DD1039 Rock SpringsSign Type: A7Description: Wall sectionScale: 3/4”=1’-0”
2"1"
5"2'-
9"
Section 3DrawingsA8 and F1 - Option 1
Logo Detail
1 SECTION - F1SCALE: 3/4”=1’-0”
10
9
81
2
4
6
7
3
2 SECTION - A8SCALE: 3/4”=1’-0”
35
1
2
3
4
5
6
7
8
9
10
2
Project:
Sheet Description:
Project Number: Page:
DD1039
Wayfinding ProgramBid Documents
Phase
City of Rock Springs
Prepared for:
Date:
October, 2009
© 2009 Destination Development International, Inc. (DDI)
All rights reserved. This material is the property of DDI.
The recipient acknowledges that this material is
proprietary and agrees not to use or disclose this
material, or to make copies, without the written consent
of DDI, as long as the material remains confidential
and property known only by DDI and authorized
recipients. These drawings are meant for Design
Intent only and are not for construction. All
dimensions and site conditions shall be verified by
the Sign Contractor. DDI shall be notified of any
and all discrepancies, variations or substitutions
from these documents. Shop drawings, specification
details and samples shall be submitted to DDI
for approval prior to proceeding with fabrication.
All copy shall be proofread by the client and
legal requirements checked by their legal counsel.
Destination Development International, Inc.Florida Design Office 561.847.0868www.destinationdevelopment.com
3.10
Curved wall. Stacked and filled concrete block, finished with Dryvit.
Steel rebar.
LED solar powered flood light.
Concrete foundation.
Solar collectors.
Grade
All-thread standoffs with PVC sleeve.Painted to match mounting surface.
.25” thick aluminum plate. Edges finished smooth, pin-mounted 1” from wall.
White fiberglass flagpole.
Concrete foundation. To match flagpole manufacturer’s specs. Sign Fabricator shall include engineered details in their shop drawings.
3/8”=1’-0”1/4”=1’-0”3/16”=1’-0”1/8”=1’-0”
General Drawing Line - .5 pt.
Minor Detail Line - .25 pt.
Grade / Mounting Surface Line - 2 pt.
Ghost Line - .25 pt.
Perimeter / Section / Emphasis Line - 1 pt.
8”x8”X16” SINGLE BN CONCRETE BRICK
8"
4'-6"
8"1'-
2"
3'-0"6'-0"
Project: DD1039 Rock SpringsSign Type: A7Description: Wall sectionScale: 3/4”=1’-0”
1"
5"2'-
9"
Section 3DrawingsA8 and F1 - Option 2Logo Detail
1 SECTION - F1SCALE: 3/4”=1’-0”
10
9
81
2
4
6
7
3
2 SECTION - A8SCALE: 3/4”=1’-0”
35
1
2
3
4
5
6
7
8
9
10
2
Project:
Sheet Description:
Project Number: Page:
DD1039
Wayfinding ProgramBid Documents
Phase
City of Rock Springs
Prepared for:
Date:
October, 2009
© 2009 Destination Development International, Inc. (DDI)
All rights reserved. This material is the property of DDI.
The recipient acknowledges that this material is
proprietary and agrees not to use or disclose this
material, or to make copies, without the written consent
of DDI, as long as the material remains confidential
and property known only by DDI and authorized
recipients. These drawings are meant for Design
Intent only and are not for construction. All
dimensions and site conditions shall be verified by
the Sign Contractor. DDI shall be notified of any
and all discrepancies, variations or substitutions
from these documents. Shop drawings, specification
details and samples shall be submitted to DDI
for approval prior to proceeding with fabrication.
All copy shall be proofread by the client and
legal requirements checked by their legal counsel.
Destination Development International, Inc.Florida Design Office 561.847.0868www.destinationdevelopment.com
3.11
General Drawing Line - .5 pt.
Minor Detail Line - .25 pt.
Grade / Mounting Surface Line - 2 pt.
Ghost Line - .25 pt.
Perimeter / Section / Emphasis Line - 1 pt.
Project: DD1039 Rock SpringsSign Type: A7Description: Logo DetailScale: 3/4”=1’-0”
3/8”=1’-0”1/4”=1’-0”3/16”=1’-0”1/8”=1’-0”
1"
1"
2'-9"
2"
5"
1"
5"
Section 3DrawingsA8 - Options 1 & 2Logo Detail
1 GRAPHIC DETAIL SCALE: 3/4”=1’-0”
2 SECTION - Opt 1SCALE: 3/4”=1’-0”
3
2
1
1
Reverse channel logo made with .080” thick aluminum sheet. Edges finished smooth.
Stacked and filled concrete block, finished with Dryvit.
All-thread standoffs with PVC sleeve.Painted to match mounting surface.
.25” thick aluminum plate. Edges and exposed surfaces finished smooth and painted to match face, pin-mounted 1” from wall.
Finish with primer and Matthews enamel paint. See chart on page 2.6
1
2
3
P-
2-33.11
4
4
3
1 P74
1 P54
1 P34
1 P14
1 P34
3 SECTION - Opt 2SCALE: 3/4”=1’-0”
2
Project:
Sheet Description:
Project Number: Page:
DD1039
Wayfinding ProgramBid Documents
Phase
City of Rock Springs
Prepared for:
Date:
October, 2009
© 2009 Destination Development International, Inc. (DDI)
All rights reserved. This material is the property of DDI.
The recipient acknowledges that this material is
proprietary and agrees not to use or disclose this
material, or to make copies, without the written consent
of DDI, as long as the material remains confidential
and property known only by DDI and authorized
recipients. These drawings are meant for Design
Intent only and are not for construction. All
dimensions and site conditions shall be verified by
the Sign Contractor. DDI shall be notified of any
and all discrepancies, variations or substitutions
from these documents. Shop drawings, specification
details and samples shall be submitted to DDI
for approval prior to proceeding with fabrication.
All copy shall be proofread by the client and
legal requirements checked by their legal counsel.
Destination Development International, Inc.Florida Design Office 561.847.0868www.destinationdevelopment.com
3.12
3/8”=1’-0”1/4”=1’-0”3/16”=1’-0”1/8”=1’-0”
3'-6"
General Drawing Line - .5 pt.
Minor Detail Line - .25 pt.
Grade / Mounting Surface Line - 2 pt.
Ghost Line - .25 pt.
Perimeter / Section / Emphasis Line - 1 pt.
Project: DD1039 Rock SpringsSign Type: A8Description: Elevation and plan viewScale: 1/4”=1’-0”
8"
52°
9'-3"
8"10"
EQ"EQ"
12'-0"
6"
1'-5 1/2" Section 3Drawings A9Elevations1 FRONT ELEVATION
SCALE: 1/2”=1’-0”
2 PLAN VIEWSCALE: 1/2”=1’-0”
2 D1
4
3
23.12
2 D1
13.13
4
1 P12
.24” thick aluminum cut-out letters and logo, pin-mounted to wall substrate.
Sign wall. Stacked and filled concrete block, finished with Dryvit.
Solar powered spot light.
Deconstructed edge. Fill with concrete and cover with matching Dryvit.
Finish with EIFS. See chart on page 2.6
Finish with primer and Matthews enamel paint. See chart on page 2.6
1
2
3
4
D-
P-
3
Project:
Sheet Description:
Project Number: Page:
DD1039
Wayfinding ProgramBid Documents
Phase
City of Rock Springs
Prepared for:
Date:
October, 2009
© 2009 Destination Development International, Inc. (DDI)
All rights reserved. This material is the property of DDI.
The recipient acknowledges that this material is
proprietary and agrees not to use or disclose this
material, or to make copies, without the written consent
of DDI, as long as the material remains confidential
and property known only by DDI and authorized
recipients. These drawings are meant for Design
Intent only and are not for construction. All
dimensions and site conditions shall be verified by
the Sign Contractor. DDI shall be notified of any
and all discrepancies, variations or substitutions
from these documents. Shop drawings, specification
details and samples shall be submitted to DDI
for approval prior to proceeding with fabrication.
All copy shall be proofread by the client and
legal requirements checked by their legal counsel.
Destination Development International, Inc.Florida Design Office 561.847.0868www.destinationdevelopment.com
3.13
3/8”=1’-0”1/4”=1’-0”3/16”=1’-0”1/8”=1’-0”
General Drawing Line - .5 pt.
Minor Detail Line - .25 pt.
Grade / Mounting Surface Line - 2 pt.
Ghost Line - .25 pt.
Perimeter / Section / Emphasis Line - 1 pt.
8”x8”X16” SINGLE BN CONCRETE BRICK
Project: DD1039 Rock SpringsSign Type: A8Description: Wall sectionScale: 3/4”=1’-0”
8"
3'-6"
8"1'-
2"
3'-0"
1/2"
Section 3DrawingsA9Wall Section
1 SECTIONSCALE: 3/4”=1’-0”
2
6
5
1
3
Sign wall. Stacked and filled concrete block, finished with Dryvit.
Steel rebar.
Solar powered spot light.
Concrete foundation. Sign Fabricator shall include engineered details in their shop drawings.
Grade
.24” thick aluminum cut-out letters and logo, pin-mounted to wall substrate.
1
2
3
4
5
6
4
3
Project:
Sheet Description:
Project Number: Page:
DD1039
Wayfinding ProgramBid Documents
Phase
City of Rock Springs
Prepared for:
Date:
October, 2009
© 2009 Destination Development International, Inc. (DDI)
All rights reserved. This material is the property of DDI.
The recipient acknowledges that this material is
proprietary and agrees not to use or disclose this
material, or to make copies, without the written consent
of DDI, as long as the material remains confidential
and property known only by DDI and authorized
recipients. These drawings are meant for Design
Intent only and are not for construction. All
dimensions and site conditions shall be verified by
the Sign Contractor. DDI shall be notified of any
and all discrepancies, variations or substitutions
from these documents. Shop drawings, specification
details and samples shall be submitted to DDI
for approval prior to proceeding with fabrication.
All copy shall be proofread by the client and
legal requirements checked by their legal counsel.
Destination Development International, Inc.Florida Design Office 561.847.0868www.destinationdevelopment.com
3.14
3/8”=1’-0”1/4”=1’-0”3/16”=1’-0”1/8”=1’-0”
General Drawing Line - .5 pt.
Minor Detail Line - .25 pt.
Grade / Mounting Surface Line - 2 pt.
Ghost Line - .25 pt.
Perimeter / Section / Emphasis Line - 1 pt.
PA R K I N G
Project: DD1039 Rock SpringsSign Type: A9Description: Elevations and SectionsScale: 1/2”=1’-0”
4'-9"
3'-6"
2'-8"8'-9" Vaies with clearance requirements
1'-6 1/2"
11"
4"6"
8"
2'-4"
2'-0"
4'-0"
2"
1'-9 1/2"
7 1/2"
4'-0"
Section 3Drawings A10 - Option 1Elevations and Sections
1 FRONT ELEVATIONSCALE: 1/2”=1’-0”
33.14
23.14
2 SIDE ELEVATIONSCALE: 1/2”=1’-0”
3 SECTIONSCALE: 1/2”=1’-0”
4 BRACKET DETAILSCALE: 1/2”=1’-0”
3
6
2 P9
5 P9
7
3 P92 P9
4 P6
1
4
3 P9
2 P9
.125” thick aluminum sheet. Edges finished smooth.
Rectangular aluminum tube welded to aluminum mounting plate. Receives electrical wiring from ballast.
.25 thick aluminum mounting plate.
.080 aluminum channel can with white acrylic face, decorated with translucent vinyl.
Lag bolt anchored into reinforced wall substrate.
White neon.
Ballast
Finish with primer and Matthews enamel paint. See chart on page 2.6
1
2
3
4
P-
5
6
7
P7
3
Project:
Sheet Description:
Project Number: Page:
DD1039
Wayfinding ProgramBid Documents
Phase
City of Rock Springs
Prepared for:
Date:
October, 2009
© 2009 Destination Development International, Inc. (DDI)
All rights reserved. This material is the property of DDI.
The recipient acknowledges that this material is
proprietary and agrees not to use or disclose this
material, or to make copies, without the written consent
of DDI, as long as the material remains confidential
and property known only by DDI and authorized
recipients. These drawings are meant for Design
Intent only and are not for construction. All
dimensions and site conditions shall be verified by
the Sign Contractor. DDI shall be notified of any
and all discrepancies, variations or substitutions
from these documents. Shop drawings, specification
details and samples shall be submitted to DDI
for approval prior to proceeding with fabrication.
All copy shall be proofread by the client and
legal requirements checked by their legal counsel.
Destination Development International, Inc.Florida Design Office 561.847.0868www.destinationdevelopment.com
3.15
3/8”=1’-0”1/4”=1’-0”3/16”=1’-0”1/8”=1’-0”
General Drawing Line - .5 pt.
Minor Detail Line - .25 pt.
Grade / Mounting Surface Line - 2 pt.
Ghost Line - .25 pt.
Perimeter / Section / Emphasis Line - 1 pt.
PA R K I N G
Project: DD1039 Rock SpringsSign Type: A9-AlternateDescription: Elevations and SectionsScale: 1/2”=1’-0”
4'-9"8'-9" Vaies with clearance requirements
4"
8"
8"
3'-6" 10"
4'-0"
4'-0"Section 3Drawings A10 - Option 2Elevations and Sections
1 FRONT ELEVATIONSCALE: 1/2”=1’-0”
23.15
2 SIDE ELEVATIONSCALE: 1/2”=1’-0”
1
3 P9
2 P9
4 P9
.25” thick aluminum plate. Edges finished smooth.
Rectangular aluminum tube welded to aluminum mounting plate.
.25 thick aluminum mounting plate.
Halogyn Lamp on 1/2ӯ aluminum tube.
Finish with primer and Matthews enamel paint. See chart on page 2.6
1
2
3
4
P-
2 P93
Project:
Sheet Description:
Project Number: Page:
DD1039
Wayfinding ProgramBid Documents
Phase
City of Rock Springs
Prepared for:
Date:
October, 2009
© 2009 Destination Development International, Inc. (DDI)
All rights reserved. This material is the property of DDI.
The recipient acknowledges that this material is
proprietary and agrees not to use or disclose this
material, or to make copies, without the written consent
of DDI, as long as the material remains confidential
and property known only by DDI and authorized
recipients. These drawings are meant for Design
Intent only and are not for construction. All
dimensions and site conditions shall be verified by
the Sign Contractor. DDI shall be notified of any
and all discrepancies, variations or substitutions
from these documents. Shop drawings, specification
details and samples shall be submitted to DDI
for approval prior to proceeding with fabrication.
All copy shall be proofread by the client and
legal requirements checked by their legal counsel.
Destination Development International, Inc.Florida Design Office 561.847.0868www.destinationdevelopment.com
3.16
3/8”=1’-0”1/4”=1’-0”3/16”=1’-0”1/8”=1’-0”
General Drawing Line - .5 pt.
Minor Detail Line - .25 pt.
Grade / Mounting Surface Line - 2 pt.
Ghost Line - .25 pt.
Perimeter / Section / Emphasis Line - 1 pt.
PA R K I N G
Project: DD1039 Rock SpringsSign Type: A4Description: GraphicsScale: 1”=1’-0”
2'-8"8"
4 1/2"3"
3 1/2"2"
Section 3Drawings A10 - Option 1 & 2Graphics
1 GRAPHIC DETAIL Opt 1SCALE: 1”=1’-0”
P5
P1
P7
P1
V3
P5
P1
V2
Finish with primer and Matthews enamel paint. See chart on page 2.6
Exterior grade vinyl. See chart on page 2.6
P-
V-
3/8”=1’-0”1/4”=1’-0”3/16”=1’-0”1/8”=1’-0”
General Drawing Line - .5 pt.
Minor Detail Line - .25 pt.
Grade / Mounting Surface Line - 2 pt.
Ghost Line - .25 pt.
Perimeter / Section / Emphasis Line - 1 pt.
PA R K I N G
Project: DD1039 Rock SpringsSign Type: A4Description: GraphicsScale: 1”=1’-0”
2'-8"8"
4 1/2"3"
3 1/2"2"
2 GRAPHIC DETAIL - Opt 2SCALE: 1”=1’-0”
P5
P1
P7
P3
P5
P1
V2
V2
3
Project:
Sheet Description:
Project Number: Page:
DD1039
Wayfinding ProgramBid Documents
Phase
City of Rock Springs
Prepared for:
Date:
October, 2009
© 2009 Destination Development International, Inc. (DDI)
All rights reserved. This material is the property of DDI.
The recipient acknowledges that this material is
proprietary and agrees not to use or disclose this
material, or to make copies, without the written consent
of DDI, as long as the material remains confidential
and property known only by DDI and authorized
recipients. These drawings are meant for Design
Intent only and are not for construction. All
dimensions and site conditions shall be verified by
the Sign Contractor. DDI shall be notified of any
and all discrepancies, variations or substitutions
from these documents. Shop drawings, specification
details and samples shall be submitted to DDI
for approval prior to proceeding with fabrication.
All copy shall be proofread by the client and
legal requirements checked by their legal counsel.
Destination Development International, Inc.Florida Design Office 561.847.0868www.destinationdevelopment.com
3.173/8”=1’-0”1/4”=1’-0”3/16”=1’-0”1/8”=1’-0”
General Drawing Line - .5 pt.
Minor Detail Line - .25 pt.
Grade / Mounting Surface Line - 2 pt.
Ghost Line - .25 pt.
Perimeter / Section / Emphasis Line - 1 pt.
Project: DD1039 Rock SpringsSign Type: B1Description: DetailScale: 1 1/2”=1’-0”
14” Ornamental BaseHooks & Latticehttp://www.hooksandlattice.com/ornamental-cast-base.html
1'-6"
4'-0"1'-0"
Section 3Drawings B1Detail
1 FRONT DETAILSCALE: 1 1/2”=1’-0”
3 P9
Pole pocket for 1” Ø pole.
Double stitch hem.
16 oz double-faced vinyl with opaque layer between vinyl faces.
Screen printed to match logo standard colors. See page 2.4
1
22
4
1
1
4
2
3
GraphicTBD
3
1
Project:
Sheet Description:
Project Number: Page:
DD1039
Wayfinding ProgramBid Documents
Phase
City of Rock Springs
Prepared for:
Date:
October, 2009
© 2009 Destination Development International, Inc. (DDI)
All rights reserved. This material is the property of DDI.
The recipient acknowledges that this material is
proprietary and agrees not to use or disclose this
material, or to make copies, without the written consent
of DDI, as long as the material remains confidential
and property known only by DDI and authorized
recipients. These drawings are meant for Design
Intent only and are not for construction. All
dimensions and site conditions shall be verified by
the Sign Contractor. DDI shall be notified of any
and all discrepancies, variations or substitutions
from these documents. Shop drawings, specification
details and samples shall be submitted to DDI
for approval prior to proceeding with fabrication.
All copy shall be proofread by the client and
legal requirements checked by their legal counsel.
Destination Development International, Inc.Florida Design Office 561.847.0868www.destinationdevelopment.com
3.18
3/8”=1’-0”1/4”=1’-0”3/16”=1’-0”1/8”=1’-0”
General Drawing Line - .5 pt.
Minor Detail Line - .25 pt.
Grade / Mounting Surface Line - 2 pt.
Ghost Line - .25 pt.
Perimeter / Section / Emphasis Line - 1 pt.
Project: DD1039 Rock SpringsSign Type: F2Description: Elevation Scale: 1”=1’-0”
14” Ornamental BaseHooks & Latticehttp://www.hooksandlattice.com/ornamental-cast-base.html
6'-0"4'-0"
9" 4'-6"
10 1/2"
Section 3Drawings F2Details
White nylon. Double stitch hem all 4 edges.
Screen printed or nylon applique to match logo standard colors. See page 2.4
1
2
1 FRONT DETAILSCALE: 1”=1’-0”
1
2
2
Project:
Sheet Description:
Project Number: Page:
DD1039
Wayfinding ProgramBid Documents
Phase
City of Rock Springs
Prepared for:
Date:
October, 2009
© 2009 Destination Development International, Inc. (DDI)
All rights reserved. This material is the property of DDI.
The recipient acknowledges that this material is
proprietary and agrees not to use or disclose this
material, or to make copies, without the written consent
of DDI, as long as the material remains confidential
and property known only by DDI and authorized
recipients. These drawings are meant for Design
Intent only and are not for construction. All
dimensions and site conditions shall be verified by
the Sign Contractor. DDI shall be notified of any
and all discrepancies, variations or substitutions
from these documents. Shop drawings, specification
details and samples shall be submitted to DDI
for approval prior to proceeding with fabrication.
All copy shall be proofread by the client and
legal requirements checked by their legal counsel.
Destination Development International, Inc.Florida Design Office 561.847.0868www.destinationdevelopment.com
3.19
Section 3DrawingsG1 - Option 1Elevation & Plan View
Reverse channel logo made with .080” thick aluminum sheet. Edges finished smooth.
Planter wall. Stacked and filled concrete block, finished with Dryvit.
Curved wall. Stacked and filled concrete block, finished with Dryvit.
All-thread standoffs with PVC sleeve.Painted to match mounting surface.
LED solar powered flood light.
Deconstructed edge. Fill with concrete and cover with Dryvit.
Solar powered spot light.
Solar collectors.
Finish with EIFS. See chart on page 2.6
1
2
3
4
5
6
3/8”=1’-0”1/4”=1’-0”3/16”=1’-0”1/8”=1’-0”
R 77'-0"R 79'-0"
R 80'-0"R 81'-0"
R 83'-0"
8"
8"6'-7" 2'-8"
2'-8"
6"
1'-1 1/2"
1'-1 1/2"
15'-0"19'-0"28'-0"
12'-0"10'-3"
36'-6"
11"
2'-1"
4'-0" 2'-6"2'-0"
21°21°
2"
2'-0"
General Drawing Line - .5 pt.
Minor Detail Line - .25 pt.
Grade / Mounting Surface Line - 2 pt.
Ghost Line - .25 pt.
Perimeter / Section / Emphasis Line - 1 pt.
Project: DD1039 Rock SpringsSign Type: G1Description: Elevation and plan viewScale: 1/4”=1’-0”
8"
1 FRONT ELEVATIONSCALE: 1/4”=1’-0”
2 PLAN VIEW SCALE: 1/4”=1’-0”
23.19
13.24
13.22
6
14
3
1
5
3 D2
D-
2 D13 D1
D3
2 D1
3 D1
3 D3
3 D2
7
8
7
8
1
Project:
Sheet Description:
Project Number: Page:
DD1039
Wayfinding ProgramBid Documents
Phase
City of Rock Springs
Prepared for:
Date:
October, 2009
© 2009 Destination Development International, Inc. (DDI)
All rights reserved. This material is the property of DDI.
The recipient acknowledges that this material is
proprietary and agrees not to use or disclose this
material, or to make copies, without the written consent
of DDI, as long as the material remains confidential
and property known only by DDI and authorized
recipients. These drawings are meant for Design
Intent only and are not for construction. All
dimensions and site conditions shall be verified by
the Sign Contractor. DDI shall be notified of any
and all discrepancies, variations or substitutions
from these documents. Shop drawings, specification
details and samples shall be submitted to DDI
for approval prior to proceeding with fabrication.
All copy shall be proofread by the client and
legal requirements checked by their legal counsel.
Destination Development International, Inc.Florida Design Office 561.847.0868www.destinationdevelopment.com
3.20
Section 3DrawingsG1 - Option 2Elevation & Plan View
3/8”=1’-0”1/4”=1’-0”3/16”=1’-0”1/8”=1’-0”
R 77'-0"R 79'-0"
R 80'-0"R 81'-0"
R 83'-0"
8"
8"6'-7" 2'-8"
2'-8"
6"
1'-1 1/2"
1'-1 1/2"
8'-0"11'-11"20'-7"
4'-11"3'-2"
29'-0"
11"
2'-1"
4'-0" 2'-6"2'-0"
21°21°
2"
1'-6"
General Drawing Line - .5 pt.
Minor Detail Line - .25 pt.
Grade / Mounting Surface Line - 2 pt.
Ghost Line - .25 pt.
Perimeter / Section / Emphasis Line - 1 pt.
Project: DD1039 Rock SpringsSign Type: G2Description: Elevation and plan viewScale: 1/4”=1’-0”
8"
1 FRONT ELEVATIONSCALE: 1/4”=1’-0”
2 PLAN VIEW SCALE: 1/4”=1’-0”
23.20
13.24
13.22
6
1
3
1
4
3 D22 D1
3 D1
2 D1
3 D1
3 D3
3 D2
3 D3
5
7
8
Reverse channel logo made with .080” thick aluminum sheet. Edges finished smooth.
Planter wall. Stacked and filled concrete block, finished with Dryvit.
Curved wall. Stacked and filled concrete block, finished with Dryvit.
All-thread standoffs with PVC sleeve.Painted to match mounting surface.
LED solar powered flood light.
Deconstructed edge. Fill with concrete and cover with Dryvit.
Solar powered spot light.
Solar collectors.
Finish with EIFS. See chart on page 2.6
1
2
3
4
5
6
D-
7
8
1
Project:
Sheet Description:
Project Number: Page:
DD1039
Wayfinding ProgramBid Documents
Phase
City of Rock Springs
Prepared for:
Date:
October, 2009
© 2009 Destination Development International, Inc. (DDI)
All rights reserved. This material is the property of DDI.
The recipient acknowledges that this material is
proprietary and agrees not to use or disclose this
material, or to make copies, without the written consent
of DDI, as long as the material remains confidential
and property known only by DDI and authorized
recipients. These drawings are meant for Design
Intent only and are not for construction. All
dimensions and site conditions shall be verified by
the Sign Contractor. DDI shall be notified of any
and all discrepancies, variations or substitutions
from these documents. Shop drawings, specification
details and samples shall be submitted to DDI
for approval prior to proceeding with fabrication.
All copy shall be proofread by the client and
legal requirements checked by their legal counsel.
Destination Development International, Inc.Florida Design Office 561.847.0868www.destinationdevelopment.com
3.21
Section 3DrawingsG1 - Option 3Elevation & Plan View
3/8”=1’-0”1/4”=1’-0”3/16”=1’-0”1/8”=1’-0”
8'-0"12'-0"20'-7"
5'-0"
1’-0"
4'-6" 3'-0"
21°
1'-6"
General Drawing Line - .5 pt.
Minor Detail Line - .25 pt.
Grade / Mounting Surface Line - 2 pt.
Ghost Line - .25 pt.
Perimeter / Section / Emphasis Line - 1 pt.
Project: DD1039 Rock SpringsSign Type: G2Description: Elevation and plan viewScale: 1/4”=1’-0”
8"
6"
1 FRONT ELEVATIONSCALE: 1/4”=1’-0”
2 PLAN VIEW SCALE: 1/4”=1’-0”
23.21
13.24
13.23
3
1
1
5
2 D32 D1
2 D1
2 D3
3
.25” thick aluminum plate. Edges finished smooth, pin-mounted 1” from wall.
Stacked and filled concrete block, finished with Dryvit.
Deconstructed edge. Fill with concrete and cover with Dryvit.
All-thread standoffs with PVC sleeve.Painted to match mounting surface.
LED solar powered flood light.
Solar collectors.
Finish with EIFS. See chart on page 2.6
1
2
3
4
5
6
D-
6
4
1
Project:
Sheet Description:
Project Number: Page:
DD1039
Wayfinding ProgramBid Documents
Phase
City of Rock Springs
Prepared for:
Date:
October, 2009
© 2009 Destination Development International, Inc. (DDI)
All rights reserved. This material is the property of DDI.
The recipient acknowledges that this material is
proprietary and agrees not to use or disclose this
material, or to make copies, without the written consent
of DDI, as long as the material remains confidential
and property known only by DDI and authorized
recipients. These drawings are meant for Design
Intent only and are not for construction. All
dimensions and site conditions shall be verified by
the Sign Contractor. DDI shall be notified of any
and all discrepancies, variations or substitutions
from these documents. Shop drawings, specification
details and samples shall be submitted to DDI
for approval prior to proceeding with fabrication.
All copy shall be proofread by the client and
legal requirements checked by their legal counsel.
Destination Development International, Inc.Florida Design Office 561.847.0868www.destinationdevelopment.com
3.22
3/8”=1’-0”1/4”=1’-0”3/16”=1’-0”1/8”=1’-0”
General Drawing Line - .5 pt.
Minor Detail Line - .25 pt.
Grade / Mounting Surface Line - 2 pt.
Ghost Line - .25 pt.
Perimeter / Section / Emphasis Line - 1 pt.
8”x8”X16” SINGLE BN CONCRETE BRICK
Project: DD1039 Rock SpringsSign Type: A1.1Description: Wall sectionScale: 3/4”=1’-0”
1'-4"
4'-0"
3'-4"
8"
5'-4"
8"
1'-1 1/2" 1'-1 1/2" 8"
6"
Section 3DrawingsG1 Options 1 & 2Wall Section
Curved wall. Stacked and filled concrete block, finished with Dryvit.
Steel rebar.
Solar powered spot light.
Concrete foundation. Sign Fabricator shall include engineered details in their shop drawings.
LED solar powered flood light.
Solar collectors.
Planter wall. Stacked and filled concrete block, finished with Dryvit.
Grade
1
2
3
4
5
6
1 SECTIONSCALE: 3/4”=1’-0”
7
2
3
1
7
4
8
56
8
1
Project:
Sheet Description:
Project Number: Page:
DD1039
Wayfinding ProgramBid Documents
Phase
City of Rock Springs
Prepared for:
Date:
October, 2009
© 2009 Destination Development International, Inc. (DDI)
All rights reserved. This material is the property of DDI.
The recipient acknowledges that this material is
proprietary and agrees not to use or disclose this
material, or to make copies, without the written consent
of DDI, as long as the material remains confidential
and property known only by DDI and authorized
recipients. These drawings are meant for Design
Intent only and are not for construction. All
dimensions and site conditions shall be verified by
the Sign Contractor. DDI shall be notified of any
and all discrepancies, variations or substitutions
from these documents. Shop drawings, specification
details and samples shall be submitted to DDI
for approval prior to proceeding with fabrication.
All copy shall be proofread by the client and
legal requirements checked by their legal counsel.
Destination Development International, Inc.Florida Design Office 561.847.0868www.destinationdevelopment.com
3.23
3/8”=1’-0”1/4”=1’-0”3/16”=1’-0”1/8”=1’-0”
General Drawing Line - .5 pt.
Minor Detail Line - .25 pt.
Grade / Mounting Surface Line - 2 pt.
Ghost Line - .25 pt.
Perimeter / Section / Emphasis Line - 1 pt.
8”x8”X16” SINGLE BN CONCRETE BRICK
Project: DD1039 Rock SpringsSign Type: G1-Alt 2Description: Wall sectionScale: 3/4”=1’-0”
3'-8"
8"
5'-4"
6"
4'-6"
8"
Section 3DrawingsG1 Option 3Wall Section
Stacked and filled concrete block, finished with Dryvit.
Steel rebar.
LED solar powered flood light.
Concrete foundation. Sign Fabricator shall include engineered details in their shop drawings.
Solar collectors.
Grade
1
2
3
4
5
6
1 SECTIONSCALE: 3/4”=1’-0”
2
1
4
35
6
11
Project:
Sheet Description:
Project Number: Page:
DD1039
Wayfinding ProgramBid Documents
Phase
City of Rock Springs
Prepared for:
Date:
October, 2009
© 2009 Destination Development International, Inc. (DDI)
All rights reserved. This material is the property of DDI.
The recipient acknowledges that this material is
proprietary and agrees not to use or disclose this
material, or to make copies, without the written consent
of DDI, as long as the material remains confidential
and property known only by DDI and authorized
recipients. These drawings are meant for Design
Intent only and are not for construction. All
dimensions and site conditions shall be verified by
the Sign Contractor. DDI shall be notified of any
and all discrepancies, variations or substitutions
from these documents. Shop drawings, specification
details and samples shall be submitted to DDI
for approval prior to proceeding with fabrication.
All copy shall be proofread by the client and
legal requirements checked by their legal counsel.
Destination Development International, Inc.Florida Design Office 561.847.0868www.destinationdevelopment.com
3.24
General Drawing Line - .5 pt.
Minor Detail Line - .25 pt.
Grade / Mounting Surface Line - 2 pt.
Ghost Line - .25 pt.
Perimeter / Section / Emphasis Line - 1 pt.
Project: DD1039 Rock SpringsSign Type: A1.1Description: Logo DetailScale: 3/4”=1’-0”
3/8”=1’-0”1/4”=1’-0”3/16”=1’-0”1/8”=1’-0”
1" (at minimum point)
1"
5'-0"
3"1"
Section 3DrawingsG1 Options 1 & 2Logo Detail
1 GRAPHIC DETAIL SCALE: 3/4”=1’-0”
Reverse channel logo made with .080” thick aluminum sheet. Edges finished smooth.
Back of exposed logo covered with .080 thick aluminum sheet.
Stacked and filled concrete block, finished with Dryvit.
All-thread standoffs with PVC sleeve.Painted to match mounting surface.
.25” thick aluminum plate. Edges and exposed surfaces finished smooth and painted to match face, pin-mounted 1” from wall.
Finish with primer and Matthews enamel paint. See chart on page 2.6
1
2
3
4
2 SECTION Opt 1SCALE: 3/4”=1’-0”
4
3
1
1
2P7
P-
2-33.19
3 SECTION-Opt 2SCALE: 3/4”=1’-0”
5
4
1 P75
1 P55
1 P35
1 P15
1 P35
5
5
1
Project:
Sheet Description:
Project Number: Page:
DD1039
Wayfinding ProgramBid Documents
Phase
City of Rock Springs
Prepared for:
Date:
October, 2009
© 2009 Destination Development International, Inc. (DDI)
All rights reserved. This material is the property of DDI.
The recipient acknowledges that this material is
proprietary and agrees not to use or disclose this
material, or to make copies, without the written consent
of DDI, as long as the material remains confidential
and property known only by DDI and authorized
recipients. These drawings are meant for Design
Intent only and are not for construction. All
dimensions and site conditions shall be verified by
the Sign Contractor. DDI shall be notified of any
and all discrepancies, variations or substitutions
from these documents. Shop drawings, specification
details and samples shall be submitted to DDI
for approval prior to proceeding with fabrication.
All copy shall be proofread by the client and
legal requirements checked by their legal counsel.
Destination Development International, Inc.Florida Design Office 561.847.0868www.destinationdevelopment.com
3.25
3/8”=1’-0”1/4”=1’-0”3/16”=1’-0”1/8”=1’-0”
General Drawing Line - .5 pt.
Minor Detail Line - .25 pt.
Grade / Mounting Surface Line - 2 pt.
Ghost Line - .25 pt.
Perimeter / Section / Emphasis Line - 1 pt.
3'-8"
Project: DD1039 Rock SpringsSign Type: V4Description: Elevation Scale: 1/2”=1’-0”
1"
4"
14” Ornamental BaseHooks & Latticehttp://www.hooksandlattice.com/ornamental-cast-base.html
3 1/2"4 1/2"
1'-2"
13'-10"
6'-6"7'-6"
Section 3Drawings G2Elevations
1 FRONT ELEVATIONSCALE: 1/2”=1’-0”
33.25
2 REAR ELEVATIONSCALE: 1/2”=1’-0”
3 SIDE ELEVATIONSCALE: 1/2”=1’-0”
1
2 P9
3P9
5 P9
1 P9
4
.125” thick aluminum sheet. Edges finished smooth.
Round steel pole.
Extruded aluminum mounting straps. Machine attached to poles. Threaded to receive screw.
Tamper proof bolt. Paint to match substrate.
14” Ornamental Basefrom Hooks & Latticehttp://www.hooksandlattice.com/ornamental-cast-base.html
Finish with primer and Matthews enamel paint. See chart on page 2.6
1
2
3
4
P-
5
2
Project:
Sheet Description:
Project Number: Page:
DD1039
Wayfinding ProgramBid Documents
Phase
City of Rock Springs
Prepared for:
Date:
October, 2009
© 2009 Destination Development International, Inc. (DDI)
All rights reserved. This material is the property of DDI.
The recipient acknowledges that this material is
proprietary and agrees not to use or disclose this
material, or to make copies, without the written consent
of DDI, as long as the material remains confidential
and property known only by DDI and authorized
recipients. These drawings are meant for Design
Intent only and are not for construction. All
dimensions and site conditions shall be verified by
the Sign Contractor. DDI shall be notified of any
and all discrepancies, variations or substitutions
from these documents. Shop drawings, specification
details and samples shall be submitted to DDI
for approval prior to proceeding with fabrication.
All copy shall be proofread by the client and
legal requirements checked by their legal counsel.
Destination Development International, Inc.Florida Design Office 561.847.0868www.destinationdevelopment.com
3.26
3/8”=1’-0”1/4”=1’-0”3/16”=1’-0”1/8”=1’-0”
General Drawing Line - .5 pt.
Minor Detail Line - .25 pt.
Grade / Mounting Surface Line - 2 pt.
Ghost Line - .25 pt.
Perimeter / Section / Emphasis Line - 1 pt.Museum
City Hall
Police
To
Historical District
Project: DD1039 Rock SpringsSign Type: V4Description: GraphicsScale: 1”=1’-0”
14” Ornamental BaseHooks & Latticehttp://www.hooksandlattice.com/ornamental-cast-base.html
1'-3"3"
8"
1'-2"
6 3/4"
2 1/2"7"
HistoricalDistrict
1'-9 1/2"3'-7"
8 3/4"1'-1 3/4"
1'-3 1/2"1'-9 3/4"
1’-0"
Section 3Drawings G2Graphics
Finish with primer and Matthews enamel paint. See chart on page 2.6
Exterior grade vinyl. See chart on page 2.6
1 GRAPHIC DETAILSCALE: 1”=1’-0”
P3
V1
P9
P4
P-
V-
P4
V1
P8
P6
P4
2
Project:
Sheet Description:
Project Number: Page:
DD1039
Wayfinding ProgramBid Documents
Phase
City of Rock Springs
Prepared for:
Date:
October, 2009
© 2009 Destination Development International, Inc. (DDI)
All rights reserved. This material is the property of DDI.
The recipient acknowledges that this material is
proprietary and agrees not to use or disclose this
material, or to make copies, without the written consent
of DDI, as long as the material remains confidential
and property known only by DDI and authorized
recipients. These drawings are meant for Design
Intent only and are not for construction. All
dimensions and site conditions shall be verified by
the Sign Contractor. DDI shall be notified of any
and all discrepancies, variations or substitutions
from these documents. Shop drawings, specification
details and samples shall be submitted to DDI
for approval prior to proceeding with fabrication.
All copy shall be proofread by the client and
legal requirements checked by their legal counsel.
Destination Development International, Inc.Florida Design Office 561.847.0868www.destinationdevelopment.com
3.273/8”=1’-0”1/4”=1’-0”3/16”=1’-0”1/8”=1’-0”
General Drawing Line - .5 pt.
Minor Detail Line - .25 pt.
Grade / Mounting Surface Line - 2 pt.
Ghost Line - .25 pt.
Perimeter / Section / Emphasis Line - 1 pt.
Project: DD1039 Rock SpringsSign Type: K1Description: ElevationsScale: 1/2”=1’-0”
8'-9"
4'-6"
4'-7"
2'-1 1/2"
10 1/2"
3'-5"5"
2"
10" 1 1/2"4"
4'-1"
2"
2'-5 1/2"
4'-9"
5'-0"
7'-5 1/2"
1'-5"
2'-9"
Section 3Drawings K1 - Option 1Elevations
2” x 3” rectangular aluminum tube.
2” x 2” and 1” x 1” square aluminum tube. Welded together for form 4-sided open column.
.080 thick aluminum sheet light cabinet containing fluorescent lamps. Digital color output onto 3M™ Scotchcal™ Translucent Graphic Film RG3630-20. Full size art provided by Designer.
Curved corrugated metal roof, Mechanically fastened to supports.
2” x 2” hip cap.
1/2” thick SignPly - Single-sided, painted aluminum over furniture grade exterior plywood core.
1/2” thick laser cut graphics (fabricator to recommend material to be approved by designer). Edges finished smooth and painted.
.25” thick aluminum mounting plate welded to open column structure.
1/2” quarter round moulding.
Aluminum sheet panned over ply substrate. Seams welded, finished smooth and painted top and sides. Ends rolled over to eliminate raw edges.
4” tongue and groove siding.
MDO plywood.
Pine stud.
Concrete base. Fabricator shall submit engineering drawings for approval. Fabricator is responsible for structural integrity.
Curved square aluminum tube.
Finish with primer and Matthews enamel paint. See chart on page 2.6
NOTE: Insulate all aluminum-to-steel contacts with rubber gasket or membrane to discourage electrolysis.
1
2
3
4
5
6
7
8
9
10
2 P10
23.27
1 FRONT ELEVATIONSCALE: 1/2”=1’-0”
2 SIDE ELEVATIONSCALE: 1/2”=1’-0”
13
10P11
23.29
P6 11
1 P10
9P6
14
7
12
15 P10
4 P3
5 P3
P6 6
7
7P11
8P6
13.29
P9 3
13.31
P-
11
12
13
14
15
4
Project:
Sheet Description:
Project Number: Page:
DD1039
Wayfinding ProgramBid Documents
Phase
City of Rock Springs
Prepared for:
Date:
October, 2009
© 2009 Destination Development International, Inc. (DDI)
All rights reserved. This material is the property of DDI.
The recipient acknowledges that this material is
proprietary and agrees not to use or disclose this
material, or to make copies, without the written consent
of DDI, as long as the material remains confidential
and property known only by DDI and authorized
recipients. These drawings are meant for Design
Intent only and are not for construction. All
dimensions and site conditions shall be verified by
the Sign Contractor. DDI shall be notified of any
and all discrepancies, variations or substitutions
from these documents. Shop drawings, specification
details and samples shall be submitted to DDI
for approval prior to proceeding with fabrication.
All copy shall be proofread by the client and
legal requirements checked by their legal counsel.
Destination Development International, Inc.Florida Design Office 561.847.0868www.destinationdevelopment.com
3.283/8”=1’-0”1/4”=1’-0”3/16”=1’-0”1/8”=1’-0”
General Drawing Line - .5 pt.
Minor Detail Line - .25 pt.
Grade / Mounting Surface Line - 2 pt.
Ghost Line - .25 pt.
Perimeter / Section / Emphasis Line - 1 pt.
Project: DD1039 Rock SpringsSign Type: K1Description: ElevationsScale: 1/2”=1’-0”
8'-9"
4'-6"
1'-5"
2'-9"
8'-2"
Section 3Drawings K1 - Option 2Elevations
2” x 3” rectangular aluminum tube.
4ӯ round steel pole.
.080 thick aluminum sheet cabinet containing non-illuminate digital color output onto 3M™ Scotchcal™ Translucent Graphic Film RG3630-20. Full size art provided by Designer.
Curved corrugated metal roof, Mechanically fastened to supports.
2” x 2” hip cap.
1/2” thick SignPly - Single-sided, painted aluminum over furniture grade exterior plywood core.
1/4” thick laser cut graphics (fabricator to recommend material to be approved by designer). Edges finished smooth and painted.
Stock lockable display case (TBD).
Concrete base. Fabricator shall submit engineering drawings for approval. Fabricator is responsible for structural integrity.
Grade
Curved square aluminum tube.
Finish with primer and Matthews enamel paint. See chart on page 2.6
NOTE: Insulate all aluminum-to-steel contacts with rubber gasket or membrane to discourage electrolysis.
1
2
3
4
5
6
7
8
9
10
2 P102
3.28
1 FRONT ELEVATIONSCALE: 1/2”=1’-0”
2 SIDE ELEVATIONSCALE: 1/2”=1’-0”
23.30
1 P10
9
10
11 P10
4 P3
5 P3
P6 7
8P9
13.30
P9 3
P-
11
12
13
14
15
6 P3
6 P3
13.32
4
Project:
Sheet Description:
Project Number: Page:
DD1039
Wayfinding ProgramBid Documents
Phase
City of Rock Springs
Prepared for:
Date:
October, 2009
© 2009 Destination Development International, Inc. (DDI)
All rights reserved. This material is the property of DDI.
The recipient acknowledges that this material is
proprietary and agrees not to use or disclose this
material, or to make copies, without the written consent
of DDI, as long as the material remains confidential
and property known only by DDI and authorized
recipients. These drawings are meant for Design
Intent only and are not for construction. All
dimensions and site conditions shall be verified by
the Sign Contractor. DDI shall be notified of any
and all discrepancies, variations or substitutions
from these documents. Shop drawings, specification
details and samples shall be submitted to DDI
for approval prior to proceeding with fabrication.
All copy shall be proofread by the client and
legal requirements checked by their legal counsel.
Destination Development International, Inc.Florida Design Office 561.847.0868www.destinationdevelopment.com
3.293/8”=1’-0”1/4”=1’-0”3/16”=1’-0”1/8”=1’-0”
General Drawing Line - .5 pt.
Minor Detail Line - .25 pt.
Grade / Mounting Surface Line - 2 pt.
Ghost Line - .25 pt.
Perimeter / Section / Emphasis Line - 1 pt.
Project: DD1039 Rock SpringsSign Type: K1Description: PlansScale: 1/2”=1’-0”
8'-9"
8'-9"
10"
4'-0"
2"
1"
2'-4"
Section 3Drawings K1 - Option 1Section and Plan
2” x 3” rectangular aluminum tube.
2” x 2” and 1” x 1” square aluminum tube. Welded together for form 4-sided open column.
.080 thick aluminum sheet light cabinet containing fluorescent lamps. Digital color output onto 3M™ Scotchcal™ Translucent Graphic Film RG3630-20. Full size art provided by Designer.
Corrugated metal roof, Mechanically fastened to supports.
2” x 2” hip cap.
1/2” thick SignPly - Single-sided, painted aluminum over furniture grade exterior plywood core.
Pine stud.
Stock lockable display case (TBD).
Finish with primer and Matthews enamel paint. See chart on page 2.6
NOTE: Insulate all aluminum-to-steel contacts with rubber gasket or membrane to discourage electrolysis.
1
2
3
4
5
6
7
8
1 P10
1 SECTIONSCALE: 1/2”=1’-0”
2 PLAN VIEWSCALE: 1/2”=1’-0”
1P10
P9 6
4 P3
4P3
9
8
2P10
3
8
5P3
7
P-
4
Project:
Sheet Description:
Project Number: Page:
DD1039
Wayfinding ProgramBid Documents
Phase
City of Rock Springs
Prepared for:
Date:
October, 2009
© 2009 Destination Development International, Inc. (DDI)
All rights reserved. This material is the property of DDI.
The recipient acknowledges that this material is
proprietary and agrees not to use or disclose this
material, or to make copies, without the written consent
of DDI, as long as the material remains confidential
and property known only by DDI and authorized
recipients. These drawings are meant for Design
Intent only and are not for construction. All
dimensions and site conditions shall be verified by
the Sign Contractor. DDI shall be notified of any
and all discrepancies, variations or substitutions
from these documents. Shop drawings, specification
details and samples shall be submitted to DDI
for approval prior to proceeding with fabrication.
All copy shall be proofread by the client and
legal requirements checked by their legal counsel.
Destination Development International, Inc.Florida Design Office 561.847.0868www.destinationdevelopment.com
3.303/8”=1’-0”1/4”=1’-0”3/16”=1’-0”1/8”=1’-0”
General Drawing Line - .5 pt.
Minor Detail Line - .25 pt.
Grade / Mounting Surface Line - 2 pt.
Ghost Line - .25 pt.
Perimeter / Section / Emphasis Line - 1 pt.
4'-0"
2"
Project: DD1039 Rock SpringsSign Type: K1Description: PlansScale: 1/2”=1’-0”
8'-9"
8'-9"
1'-11" Section 3Drawings K1 - Option 2Section and Plan
2” x 3” rectangular aluminum tube.
4ӯ round steel pole.
.080 thick aluminum sheet cabinet containing non-illuminate digital color output onto 3M™ Scotchcal™ Translucent Graphic Film RG3630-20. Full size art provided by Designer.
Clear acrylic brochure holder.
Corrugated metal roof, Mechanically fastened to supports.
2” x 2” hip cap.
1/2” thick SignPly - Single-sided, painted aluminum over furniture grade exterior plywood core.
Stock lockable display case (TBD).
Aluminum C-channel holding SignPly panels.
Finish with primer and Matthews enamel paint. See chart on page 2.6
NOTE: Insulate all aluminum-to-steel contacts with rubber gasket or membrane to discourage electrolysis.
1
2
3
4
5
6
7
81 P10
1 SECTIONSCALE: 1/2”=1’-0”
2 PLAN VIEWSCALE: 1/2”=1’-0”
1P10
5 P3
5P3
8
82P10
6P3
P-9P9
7 P9
8 34
9
4
Project:
Sheet Description:
Project Number: Page:
DD1039
Wayfinding ProgramBid Documents
Phase
City of Rock Springs
Prepared for:
Date:
October, 2009
© 2009 Destination Development International, Inc. (DDI)
All rights reserved. This material is the property of DDI.
The recipient acknowledges that this material is
proprietary and agrees not to use or disclose this
material, or to make copies, without the written consent
of DDI, as long as the material remains confidential
and property known only by DDI and authorized
recipients. These drawings are meant for Design
Intent only and are not for construction. All
dimensions and site conditions shall be verified by
the Sign Contractor. DDI shall be notified of any
and all discrepancies, variations or substitutions
from these documents. Shop drawings, specification
details and samples shall be submitted to DDI
for approval prior to proceeding with fabrication.
All copy shall be proofread by the client and
legal requirements checked by their legal counsel.
Destination Development International, Inc.Florida Design Office 561.847.0868www.destinationdevelopment.com
3.31
3/8”=1’-0”1/4”=1’-0”3/16”=1’-0”1/8”=1’-0”
General Drawing Line - .5 pt.
Minor Detail Line - .25 pt.
Grade / Mounting Surface Line - 2 pt.
Ghost Line - .25 pt.
Perimeter / Section / Emphasis Line - 1 pt.
Project: DD1039 Rock SpringsSign Type: K1Description: PlansScale: 1/2”=1’-0”
3 1/2"
10"
9"
3"
4 1/4"
Section 3Drawings K1 - Option 1Details
Clear acrylic rack card holder assembly. Join together using a water thin acrylic glue.
Piano hinge.
Rack cards to be inserted by other.
Hinged clear acrylic lid.
See chart on page 2.6
1
2
3
4
1 FRONT DETAILSCALE: 1”=1’-0”
2 SIDE DETAILSCALE: 1”=1’-0”
23.31
3
1
4
2 M1
M-
4
Project:
Sheet Description:
Project Number: Page:
DD1039
Wayfinding ProgramBid Documents
Phase
City of Rock Springs
Prepared for:
Date:
October, 2009
© 2009 Destination Development International, Inc. (DDI)
All rights reserved. This material is the property of DDI.
The recipient acknowledges that this material is
proprietary and agrees not to use or disclose this
material, or to make copies, without the written consent
of DDI, as long as the material remains confidential
and property known only by DDI and authorized
recipients. These drawings are meant for Design
Intent only and are not for construction. All
dimensions and site conditions shall be verified by
the Sign Contractor. DDI shall be notified of any
and all discrepancies, variations or substitutions
from these documents. Shop drawings, specification
details and samples shall be submitted to DDI
for approval prior to proceeding with fabrication.
All copy shall be proofread by the client and
legal requirements checked by their legal counsel.
Destination Development International, Inc.Florida Design Office 561.847.0868www.destinationdevelopment.com
3.32
3/8”=1’-0”1/4”=1’-0”3/16”=1’-0”1/8”=1’-0”
General Drawing Line - .5 pt.
Minor Detail Line - .25 pt.
Grade / Mounting Surface Line - 2 pt.
Ghost Line - .25 pt.
Perimeter / Section / Emphasis Line - 1 pt.
www.rockspringswyoming.net800-46-DUNES (463-8637)
Project: DD1039 Rock SpringsSign Type: K1Description: PlansScale: 1 1/2”=1’-0”
3'-10"
1'-8"
9"
2"
2'-3"
10 3/
4" 1'-0"
2'-3"
Section 3Drawings K1 - Option 2Details
Clear acrylic rack card holder assembly. Join together using a water thin acrylic glue.
Piano hinge.
Rack cards to be inserted by other.
Hinged clear acrylic lid.
Clear acrylic with second surface graphic and white background.
Stainless steel pull.
See chart on page 2.6
NOTE: Brochure holder can contain 6 different magazine-size pamphlets, 20 different 4”x9” brochures and 6 different digest size brochures.
1
2
3
4
1 FRONT DETAILSCALE: 1 1/2”=1’-0”
2 SIDE DETAILSCALE: 1 1/2”=1’-0”
23.32
3
1
4
2 M1 M-
5
5
5
6
6
34
Project:
Sheet Description:
Project Number: Page:
DD1039
Wayfinding ProgramBid Documents
Phase
City of Rock Springs
Prepared for:
Date:
October, 2009
© 2009 Destination Development International, Inc. (DDI)
All rights reserved. This material is the property of DDI.
The recipient acknowledges that this material is
proprietary and agrees not to use or disclose this
material, or to make copies, without the written consent
of DDI, as long as the material remains confidential
and property known only by DDI and authorized
recipients. These drawings are meant for Design
Intent only and are not for construction. All
dimensions and site conditions shall be verified by
the Sign Contractor. DDI shall be notified of any
and all discrepancies, variations or substitutions
from these documents. Shop drawings, specification
details and samples shall be submitted to DDI
for approval prior to proceeding with fabrication.
All copy shall be proofread by the client and
legal requirements checked by their legal counsel.
Destination Development International, Inc.Florida Design Office 561.847.0868www.destinationdevelopment.com
3.33
3/8”=1’-0”1/4”=1’-0”3/16”=1’-0”1/8”=1’-0”
General Drawing Line - .5 pt.
Minor Detail Line - .25 pt.
Grade / Mounting Surface Line - 2 pt.
Ghost Line - .25 pt.
Perimeter / Section / Emphasis Line - 1 pt.
Project: DD1039 Rock SpringsSign Type: R1Description: Elevation Scale: 1/2”=1’-0”
14” Ornamental BaseHooks & Latticehttp://www.hooksandlattice.com/ornamental-cast-base.html
Cras dictum. Maecenas ut turpis. In vitae erat ac orci dignissim eleifend. Nunc
quis justo.
s tincidunt pharetra. Sed pulvinar, felis id consectetuer malesuada, enim nisl mattis elit, a
facilisis tortor nibh quis leo. Sed augue lacus, pretium vitae, molestie eget, rhoncus quis, elit.
Donec in augue. Fusce orci wisi, ornare id, mollis vel, lacinia vel, massa. Pellentesque
habitant morbi tristique senectus et netus et malesuada fames ac turpis egestas.
et, rhoncus quis, e
7'-0"
2'-5"
3'-6"
2"
10'-3"
Section 3Drawings R1Elevations
1 FRONT ELEVATIONSCALE: 1/2”=1’-0”
2 SIDE ELEVATIONSCALE: 1/2”=1’-0”
2 P9
1
23.33
.125” thick aluminum sheet. Edges finished smooth.
Round steel pole.
Through-bolt welded to sign panel and fastened through round pole with tamper proof nut. Exposed nut and bolt painted to match pole color. Back of sign panels painted to match front background color.
Finish with primer and Matthews enamel paint. See chart on page 2.6
1
2
3
P-
3
P1
6
Project:
Sheet Description:
Project Number: Page:
DD1039
Wayfinding ProgramBid Documents
Phase
City of Rock Springs
Prepared for:
Date:
October, 2009
© 2009 Destination Development International, Inc. (DDI)
All rights reserved. This material is the property of DDI.
The recipient acknowledges that this material is
proprietary and agrees not to use or disclose this
material, or to make copies, without the written consent
of DDI, as long as the material remains confidential
and property known only by DDI and authorized
recipients. These drawings are meant for Design
Intent only and are not for construction. All
dimensions and site conditions shall be verified by
the Sign Contractor. DDI shall be notified of any
and all discrepancies, variations or substitutions
from these documents. Shop drawings, specification
details and samples shall be submitted to DDI
for approval prior to proceeding with fabrication.
All copy shall be proofread by the client and
legal requirements checked by their legal counsel.
Destination Development International, Inc.Florida Design Office 561.847.0868www.destinationdevelopment.com
3.34
3/8”=1’-0”1/4”=1’-0”3/16”=1’-0”1/8”=1’-0”
General Drawing Line - .5 pt.
Minor Detail Line - .25 pt.
Grade / Mounting Surface Line - 2 pt.
Ghost Line - .25 pt.
Perimeter / Section / Emphasis Line - 1 pt.
Cras dictum. Maecenas ut turpis. In vitae erat ac orci dignissim eleifend. Nunc
quis justo.
Tincidunt pharetra. Sed pulvinar, felis id consectetuer malesuada, enim nisl mattis elit, a
facilisis tortor nibh quis leo. Sed augue lacus, pretium vitae, molestie eget, rhoncus quis, elit.
Donec in augue. Fusce orci wisi, ornare id, mollis vel, lacinia vel, massa. Pellentesque
habitant morbi tristique senectus et netus et malesuada fames ac turpis egestas.
Department of Parks & Recreation
Project: DD1039 Rock SpringsSign Type: R1Description: Graphic DetailsScale: 1 1/2”=1’-0”
4 1/2"3 3/4"
3 3/4" 1 1/4"1 3/4"
3 3/8"3/4"
1 1/8"3"
Section 3Drawings R1Graphics
1 GRAPHIC DETAILSCALE: 1 1/2”=1’-0”
P2
V2
V2
V2
P2
P1
P7
P5
P3
Finish with primer and Matthews enamel paint. See chart on page 2.6
Exterior grade vinyl, screen printed or frisketed. See chart for color on page 2.7
NOTE:Message for placement only. Final TBD.
P-
V2
6
Project:
Sheet Description:
Project Number: Page:
DD1039
Wayfinding ProgramBid Documents
Phase
City of Rock Springs
Prepared for:
Date:
October, 2009
© 2009 Destination Development International, Inc. (DDI)
All rights reserved. This material is the property of DDI.
The recipient acknowledges that this material is
proprietary and agrees not to use or disclose this
material, or to make copies, without the written consent
of DDI, as long as the material remains confidential
and property known only by DDI and authorized
recipients. These drawings are meant for Design
Intent only and are not for construction. All
dimensions and site conditions shall be verified by
the Sign Contractor. DDI shall be notified of any
and all discrepancies, variations or substitutions
from these documents. Shop drawings, specification
details and samples shall be submitted to DDI
for approval prior to proceeding with fabrication.
All copy shall be proofread by the client and
legal requirements checked by their legal counsel.
Destination Development International, Inc.Florida Design Office 561.847.0868www.destinationdevelopment.com
3.35
Section 3Drawings V1 - Option 1Elevations
.125” thick aluminum sheet. Edges finished smooth.
Round steel pole.
Seam at point where panel modules meet.
Extruded aluminum mounting straps. Machine attached to panel modules with no visible protrusion on panel face. Threaded to receive screw from behind support pole.
Tamper proof bolt.
Finish with primer and Matthews enamel paint. See chart on page 2.6
1
2
3
4
5
P-
3/8”=1’-0”1/4”=1’-0”3/16”=1’-0”1/8”=1’-0”
General Drawing Line - .5 pt.
Minor Detail Line - .25 pt.
Grade / Mounting Surface Line - 2 pt.
Ghost Line - .25 pt.
Perimeter / Section / Emphasis Line - 1 pt.
5'-0"
3 1/2"1'-6"
2"
1"
Crossroads Park
Family Rec Center
Trap Club
10"
1'-2"8'-11"
10'-6" * Will vary for specific clearance requirements
Project: DD1039 Rock SpringsSign Type: V2Description: Elevation and plan viewScale: 1/2”=1’-0”
6'-0"
5'-5"
4'-5"
1'-7 1/2"
4"
3'-0"
7"
1 FRONT ELEVATIONSCALE: 1/2”=1’-0”
33.35
2 REAR ELEVATIONSCALE: 1/2”=1’-0”
2 P9
4
4P1
3 SIDE ELEVATIONSCALE: 1/2”=1’-0”
3
1 P1
1P3
1
1
5
1
Project:
Sheet Description:
Project Number: Page:
DD1039
Wayfinding ProgramBid Documents
Phase
City of Rock Springs
Prepared for:
Date:
October, 2009
© 2009 Destination Development International, Inc. (DDI)
All rights reserved. This material is the property of DDI.
The recipient acknowledges that this material is
proprietary and agrees not to use or disclose this
material, or to make copies, without the written consent
of DDI, as long as the material remains confidential
and property known only by DDI and authorized
recipients. These drawings are meant for Design
Intent only and are not for construction. All
dimensions and site conditions shall be verified by
the Sign Contractor. DDI shall be notified of any
and all discrepancies, variations or substitutions
from these documents. Shop drawings, specification
details and samples shall be submitted to DDI
for approval prior to proceeding with fabrication.
All copy shall be proofread by the client and
legal requirements checked by their legal counsel.
Destination Development International, Inc.Florida Design Office 561.847.0868www.destinationdevelopment.com
3.36
Section 3Drawings V1 - Option 2Elevations
.125” thick aluminum sheet. Edges finished smooth.
Round steel pole.
Seam at point where panel modules meet.
Extruded aluminum mounting straps. Machine attached to panel modules with no visible protrusion on panel face. Threaded to receive screw from behind support pole.
Tamper proof bolt.
Finish with primer and Matthews enamel paint. See chart on page 2.6
1
2
3
4
5
P-
3/8”=1’-0”1/4”=1’-0”3/16”=1’-0”1/8”=1’-0”
General Drawing Line - .5 pt.
Minor Detail Line - .25 pt.
Grade / Mounting Surface Line - 2 pt.
Ghost Line - .25 pt.
Perimeter / Section / Emphasis Line - 1 pt.
5'-0"
3 1/2"
1’-4 1/2"
1'-2"8'-11"
10'-4" * Will vary for specific clearance requirements
Project: DD1039 Rock SpringsSign Type: V2Description: Elevation and plan viewScale: 1/2”=1’-0”
6'-0"
1'-7 1/2"
4"
3'-7"
7"
1'-4 1/2"
1 FRONT ELEVATIONSCALE: 1/2”=1’-0”
33.36
2 REAR ELEVATIONSCALE: 1/2”=1’-0”
2 P9
4
4P1
3 SIDE ELEVATIONSCALE: 1/2”=1’-0”
3
1 P1
1
5
1
Project:
Sheet Description:
Project Number: Page:
DD1039
Wayfinding ProgramBid Documents
Phase
City of Rock Springs
Prepared for:
Date:
October, 2009
© 2009 Destination Development International, Inc. (DDI)
All rights reserved. This material is the property of DDI.
The recipient acknowledges that this material is
proprietary and agrees not to use or disclose this
material, or to make copies, without the written consent
of DDI, as long as the material remains confidential
and property known only by DDI and authorized
recipients. These drawings are meant for Design
Intent only and are not for construction. All
dimensions and site conditions shall be verified by
the Sign Contractor. DDI shall be notified of any
and all discrepancies, variations or substitutions
from these documents. Shop drawings, specification
details and samples shall be submitted to DDI
for approval prior to proceeding with fabrication.
All copy shall be proofread by the client and
legal requirements checked by their legal counsel.
Destination Development International, Inc.Florida Design Office 561.847.0868www.destinationdevelopment.com
3.37
Section 3Drawings V2 - Option 1Elevations
.125” thick aluminum sheet. Edges finished smooth.
Round steel pole.
Seam at point where panel modules meet.
Extruded aluminum mounting straps. Machine attached to panel modules with no visible protrusion on panel face. Threaded to receive screw from behind support pole.
Tamper proof bolt.
Finish with primer and Matthews enamel paint. See chart on page 2.6
1
2
3
4
5
P-
1
3/8”=1’-0”1/4”=1’-0”3/16”=1’-0”1/8”=1’-0”
General Drawing Line - .5 pt.
Minor Detail Line - .25 pt.
Grade / Mounting Surface Line - 2 pt.
Ghost Line - .25 pt.
Perimeter / Section / Emphasis Line - 1 pt.
8'-11"
Project: DD1039 Rock SpringsSign Type: V1Description: Elevation and plan viewScale: 1/2”=1’-0”
Crossroads Park
Family Rec Center
Trap Club
Chamber/Visitor Info
Historic District
10"
10'-6" * Will vary for specific clearance requirements 1'-2"
6'-0"
6'-0"
5'-5" 1"5'-0"
3 1/2"1'-6"
2"
3'-0"
1'-7 1/2"1'-7 1/2"
4"
1 FRONT ELEVATIONSCALE: 1/2”=1’-0”
33.37
2 REAR ELEVATIONSCALE: 1/2”=1’-0”
2 P9
4
4P1
3 SIDE ELEVATIONSCALE: 1/2”=1’-0”
3
1 P1
1P3
1
1
5
Project:
Sheet Description:
Project Number: Page:
DD1039
Wayfinding ProgramBid Documents
Phase
City of Rock Springs
Prepared for:
Date:
October, 2009
© 2009 Destination Development International, Inc. (DDI)
All rights reserved. This material is the property of DDI.
The recipient acknowledges that this material is
proprietary and agrees not to use or disclose this
material, or to make copies, without the written consent
of DDI, as long as the material remains confidential
and property known only by DDI and authorized
recipients. These drawings are meant for Design
Intent only and are not for construction. All
dimensions and site conditions shall be verified by
the Sign Contractor. DDI shall be notified of any
and all discrepancies, variations or substitutions
from these documents. Shop drawings, specification
details and samples shall be submitted to DDI
for approval prior to proceeding with fabrication.
All copy shall be proofread by the client and
legal requirements checked by their legal counsel.
Destination Development International, Inc.Florida Design Office 561.847.0868www.destinationdevelopment.com
3.38
Section 3Drawings V2 - Option 2Elevations
.125” thick aluminum sheet. Edges finished smooth.
Round steel pole.
Seam at point where panel modules meet.
Extruded aluminum mounting straps. Machine attached to panel modules with no visible protrusion on panel face. Threaded to receive screw from behind support pole.
Tamper proof bolt.
Finish with primer and Matthews enamel paint. See chart on page 2.6
1
2
3
4
5
P-
3/8”=1’-0”1/4”=1’-0”3/16”=1’-0”1/8”=1’-0”
General Drawing Line - .5 pt.
Minor Detail Line - .25 pt.
Grade / Mounting Surface Line - 2 pt.
Ghost Line - .25 pt.
Perimeter / Section / Emphasis Line - 1 pt.
8'-11"
Project: DD1039 Rock SpringsSign Type: V1Description: Elevation and plan viewScale: 1/2”=1’-0”
1’-4 1/2"
10'-3" * Will vary for specific clearance requirements 1'-2"
6'-6"
6'-0"5'-0"
3 1/2"3'-7"
1'-7 1/2"1'-7 1/2"
4"
1 FRONT ELEVATIONSCALE: 1/2”=1’-0”
33.38
2 REAR ELEVATIONSCALE: 1/2”=1’-0”
2 P9
4
4P1
3 SIDE ELEVATIONSCALE: 1/2”=1’-0”
3
1 P1
1P3
1
5
1
Project:
Sheet Description:
Project Number: Page:
DD1039
Wayfinding ProgramBid Documents
Phase
City of Rock Springs
Prepared for:
Date:
October, 2009
© 2009 Destination Development International, Inc. (DDI)
All rights reserved. This material is the property of DDI.
The recipient acknowledges that this material is
proprietary and agrees not to use or disclose this
material, or to make copies, without the written consent
of DDI, as long as the material remains confidential
and property known only by DDI and authorized
recipients. These drawings are meant for Design
Intent only and are not for construction. All
dimensions and site conditions shall be verified by
the Sign Contractor. DDI shall be notified of any
and all discrepancies, variations or substitutions
from these documents. Shop drawings, specification
details and samples shall be submitted to DDI
for approval prior to proceeding with fabrication.
All copy shall be proofread by the client and
legal requirements checked by their legal counsel.
Destination Development International, Inc.Florida Design Office 561.847.0868www.destinationdevelopment.com
3.39
3/8”=1’-0”1/4”=1’-0”3/16”=1’-0”1/8”=1’-0”
General Drawing Line - .5 pt.
Minor Detail Line - .25 pt.
Grade / Mounting Surface Line - 2 pt.
Ghost Line - .25 pt.
Perimeter / Section / Emphasis Line - 1 pt.
Project: DD1039 Rock SpringsSign Type: V1 and V2Description: GraphicsScale: 1/2”=1’-0”
Crossroads Park
Family Rec Center
Trap Club
Chamber/Visitor Info
Historic District
4"9 3/4"
10"3 3/4"
1'-6"
1'-0"
1'-2 1/2"
5 3/4"
Crossroads Park
Family Rec Center
Trap Club
4"9 3/4"
10"3 3/4"
1'-6"
1'-0"
1'-2 1/2"
5 3/4"
Section 3DrawingsV1 and V2 - Option 1Graphics
1 GRAPHIC DETAIL - V1SCALE: 1/2”=1’-0”
Finish with primer and Matthews enamel paint. See chart on page 2.6
Exterior grade vinyl. See chart on page 2.6
2 GRAPHIC DETAIL - V2SCALE: 1/2”=1’-0”
V1
P1
V1
P3P7
P5
P5
P3
P7
P7
P-
V-
1
Project:
Sheet Description:
Project Number: Page:
DD1039
Wayfinding ProgramBid Documents
Phase
City of Rock Springs
Prepared for:
Date:
October, 2009
© 2009 Destination Development International, Inc. (DDI)
All rights reserved. This material is the property of DDI.
The recipient acknowledges that this material is
proprietary and agrees not to use or disclose this
material, or to make copies, without the written consent
of DDI, as long as the material remains confidential
and property known only by DDI and authorized
recipients. These drawings are meant for Design
Intent only and are not for construction. All
dimensions and site conditions shall be verified by
the Sign Contractor. DDI shall be notified of any
and all discrepancies, variations or substitutions
from these documents. Shop drawings, specification
details and samples shall be submitted to DDI
for approval prior to proceeding with fabrication.
All copy shall be proofread by the client and
legal requirements checked by their legal counsel.
Destination Development International, Inc.Florida Design Office 561.847.0868www.destinationdevelopment.com
3.40
3/8”=1’-0”1/4”=1’-0”3/16”=1’-0”1/8”=1’-0”
General Drawing Line - .5 pt.
Minor Detail Line - .25 pt.
Grade / Mounting Surface Line - 2 pt.
Ghost Line - .25 pt.
Perimeter / Section / Emphasis Line - 1 pt.
Project: DD1039 Rock SpringsSign Type: V1 and V2Description: GraphicsScale: 1/2”=1’-0”
3 3/4"
1'-6"
1'-0"
4"9 3/4"
3 3/4"
1'-6"
1'-0"
Crossroads Park
Family Rec Center
Trap Club
1'-2 1/2"
5 3/4"
1'-4"
4"9 3/4"
Crossroads Park
Family Rec Center
Trap Club
Chamber/Visitor Info
Historic District
1'-4"
1'-2 1/2"
5 3/4"
Section 3DrawingsV1 and V2 - Option 2Graphics
1 GRAPHIC DETAIL - V1SCALE: 1/2”=1’-0”
Finish with primer and Matthews enamel paint. See chart on page 2.6
Exterior grade vinyl. See chart on page 2.6
2 GRAPHIC DETAIL - V2SCALE: 1/2”=1’-0”
V1
P1
V1
P3
P5
P3
P7
P7
P-
V-
P5
1
Project:
Sheet Description:
Project Number: Page:
DD1039
Wayfinding ProgramBid Documents
Phase
City of Rock Springs
Prepared for:
Date:
October, 2009
© 2009 Destination Development International, Inc. (DDI)
All rights reserved. This material is the property of DDI.
The recipient acknowledges that this material is
proprietary and agrees not to use or disclose this
material, or to make copies, without the written consent
of DDI, as long as the material remains confidential
and property known only by DDI and authorized
recipients. These drawings are meant for Design
Intent only and are not for construction. All
dimensions and site conditions shall be verified by
the Sign Contractor. DDI shall be notified of any
and all discrepancies, variations or substitutions
from these documents. Shop drawings, specification
details and samples shall be submitted to DDI
for approval prior to proceeding with fabrication.
All copy shall be proofread by the client and
legal requirements checked by their legal counsel.
Destination Development International, Inc.Florida Design Office 561.847.0868www.destinationdevelopment.com
3.41
3/8”=1’-0”1/4”=1’-0”3/16”=1’-0”1/8”=1’-0”
General Drawing Line - .5 pt.
Minor Detail Line - .25 pt.
Grade / Mounting Surface Line - 2 pt.
Ghost Line - .25 pt.
Perimeter / Section / Emphasis Line - 1 pt.
Project: DD1039 Rock SpringsSign Type: V3Description: Elevation Scale: 1/2”=1’-0”
1"
14” Ornamental BaseHooks & Latticehttp://www.hooksandlattice.com/ornamental-cast-base.html
2'-9"
4'-0"
3 1/2"
9'-7"
10"
1'-2" 2 1/2"
6'-5"
Section 3Drawings V3Elevations
1 FRONT ELEVATIONSCALE: 1/2”=1’-0”
33.41
2 REAR ELEVATIONSCALE: 1/2”=1’-0”
3 P3
3 SIDE ELEVATIONSCALE: 1/2”=1’-0”
1
2 P9
1P3
.125” thick aluminum sheet. Edges finished smooth.
Round steel pole.
Extruded aluminum mounting straps. Machine attached to panel modules with no visible protrusion on panel face. Threaded to receive screw from behind support pole.
Tamper proof bolt.
Finish with primer and Matthews enamel paint. See chart on page 2.6
1
2
3
4
P-
41
Project:
Sheet Description:
Project Number: Page:
DD1039
Wayfinding ProgramBid Documents
Phase
City of Rock Springs
Prepared for:
Date:
October, 2009
© 2009 Destination Development International, Inc. (DDI)
All rights reserved. This material is the property of DDI.
The recipient acknowledges that this material is
proprietary and agrees not to use or disclose this
material, or to make copies, without the written consent
of DDI, as long as the material remains confidential
and property known only by DDI and authorized
recipients. These drawings are meant for Design
Intent only and are not for construction. All
dimensions and site conditions shall be verified by
the Sign Contractor. DDI shall be notified of any
and all discrepancies, variations or substitutions
from these documents. Shop drawings, specification
details and samples shall be submitted to DDI
for approval prior to proceeding with fabrication.
All copy shall be proofread by the client and
legal requirements checked by their legal counsel.
Destination Development International, Inc.Florida Design Office 561.847.0868www.destinationdevelopment.com
3.42
3/8”=1’-0”1/4”=1’-0”3/16”=1’-0”1/8”=1’-0”
General Drawing Line - .5 pt.
Minor Detail Line - .25 pt.
Grade / Mounting Surface Line - 2 pt.
Ghost Line - .25 pt.
Perimeter / Section / Emphasis Line - 1 pt.
Project: DD1039 Rock SpringsSign Type: V3Description: Graphic DetailScale: 1”=1’-0”
14” Ornamental BaseHooks & Latticehttp://www.hooksandlattice.com/ornamental-cast-base.html
430
To
9 1/2"3 1/4"
3"3"
1’-0”6"
Wild HorseCorrals
1’-2"3 1/4"
6"6"
6"
Section 3Drawings V3Graphics
Finish with primer and Matthews enamel paint. See chart on page 2.6
Exterior grade vinyl. See chart on page 2.6
1 GRAPHIC DETAILSCALE: 1”=1’-0”
P3
P5
V1
P7
V1
P1
P-
V-
2 GRAPHIC DETAILSCALE: 1”=1’-0”
1
Project:
Sheet Description:
Project Number: Page:
DD1039
Wayfinding ProgramBid Documents
Phase
City of Rock Springs
Prepared for:
Date:
October, 2009
© 2009 Destination Development International, Inc. (DDI)
All rights reserved. This material is the property of DDI.
The recipient acknowledges that this material is
proprietary and agrees not to use or disclose this
material, or to make copies, without the written consent
of DDI, as long as the material remains confidential
and property known only by DDI and authorized
recipients. These drawings are meant for Design
Intent only and are not for construction. All
dimensions and site conditions shall be verified by
the Sign Contractor. DDI shall be notified of any
and all discrepancies, variations or substitutions
from these documents. Shop drawings, specification
details and samples shall be submitted to DDI
for approval prior to proceeding with fabrication.
All copy shall be proofread by the client and
legal requirements checked by their legal counsel.
Destination Development International, Inc.Florida Design Office 561.847.0868www.destinationdevelopment.com
3.43
3/8”=1’-0”1/4”=1’-0”3/16”=1’-0”1/8”=1’-0”
General Drawing Line - .5 pt.
Minor Detail Line - .25 pt.
Grade / Mounting Surface Line - 2 pt.
Ghost Line - .25 pt.
Perimeter / Section / Emphasis Line - 1 pt.
Museum
City Hall
Police
To
Historical District
Project: DD1039 Rock SpringsSign Type: V4Description: Elevation Scale: 1/2”=1’-0”
1"
4"
14” Ornamental BaseHooks & Latticehttp://www.hooksandlattice.com/ornamental-cast-base.html
3'-8"
5'-4"
3 1/2"4 1/2"
1'-2"
7'-6"
12'-9"
Section 3Drawings V4Elevations
1 FRONT ELEVATIONSCALE: 1/2”=1’-0”
33.43
2 REAR ELEVATIONSCALE: 1/2”=1’-0”
3 SIDE ELEVATIONSCALE: 1/2”=1’-0”
1
2 P9
3P9
5 P9
1 P9
4
.125” thick aluminum sheet. Edges finished smooth.
Round steel pole.
Extruded aluminum mounting straps. Machine attached to poles. Threaded to receive screw.
Tamper proof bolt. Paint to match substrate.
14” Ornamental Basefrom Hooks & Latticehttp://www.hooksandlattice.com/ornamental-cast-base.html
Finish with primer and Matthews enamel paint. See chart on page 2.6
1
2
3
4
P-
5
1
Project:
Sheet Description:
Project Number: Page:
DD1039
Wayfinding ProgramBid Documents
Phase
City of Rock Springs
Prepared for:
Date:
October, 2009
© 2009 Destination Development International, Inc. (DDI)
All rights reserved. This material is the property of DDI.
The recipient acknowledges that this material is
proprietary and agrees not to use or disclose this
material, or to make copies, without the written consent
of DDI, as long as the material remains confidential
and property known only by DDI and authorized
recipients. These drawings are meant for Design
Intent only and are not for construction. All
dimensions and site conditions shall be verified by
the Sign Contractor. DDI shall be notified of any
and all discrepancies, variations or substitutions
from these documents. Shop drawings, specification
details and samples shall be submitted to DDI
for approval prior to proceeding with fabrication.
All copy shall be proofread by the client and
legal requirements checked by their legal counsel.
Destination Development International, Inc.Florida Design Office 561.847.0868www.destinationdevelopment.com
3.44
3/8”=1’-0”1/4”=1’-0”3/16”=1’-0”1/8”=1’-0”
General Drawing Line - .5 pt.
Minor Detail Line - .25 pt.
Grade / Mounting Surface Line - 2 pt.
Ghost Line - .25 pt.
Perimeter / Section / Emphasis Line - 1 pt.Museum
City Hall
Police
To
Historical District
Project: DD1039 Rock SpringsSign Type: V4Description: GraphicsScale: 1”=1’-0”
14” Ornamental BaseHooks & Latticehttp://www.hooksandlattice.com/ornamental-cast-base.html
1'-3"3"
8"
1'-2"
6 3/4"
2 1/2"7"
HistoricalDistrict
1'-9 1/2"3'-7"
8 3/4"1'-1 3/4"
1'-3 1/2"1'-9 3/4"
1’-0"
Section 3Drawings V4Graphics
Finish with primer and Matthews enamel paint. See chart on page 2.6
Exterior grade vinyl. See chart on page 2.6
1 GRAPHIC DETAILSCALE: 1”=1’-0”
P3
V1
V1
P9
P4
P4
P-
V-
1
Project:
Sheet Description:
Project Number: Page:
DD1039
Wayfinding ProgramBid Documents
Phase
City of Rock Springs
Prepared for:
Date:
October, 2009
© 2009 Destination Development International, Inc. (DDI)
All rights reserved. This material is the property of DDI.
The recipient acknowledges that this material is
proprietary and agrees not to use or disclose this
material, or to make copies, without the written consent
of DDI, as long as the material remains confidential
and property known only by DDI and authorized
recipients. These drawings are meant for Design
Intent only and are not for construction. All
dimensions and site conditions shall be verified by
the Sign Contractor. DDI shall be notified of any
and all discrepancies, variations or substitutions
from these documents. Shop drawings, specification
details and samples shall be submitted to DDI
for approval prior to proceeding with fabrication.
All copy shall be proofread by the client and
legal requirements checked by their legal counsel.
Destination Development International, Inc.Florida Design Office 561.847.0868www.destinationdevelopment.com
3.45
3/8”=1’-0”1/4”=1’-0”3/16”=1’-0”1/8”=1’-0”
Crossroads Park
Family Rec Center
Trap ClubGeneral Drawing Line - .5 pt.
Minor Detail Line - .25 pt.
Grade / Mounting Surface Line - 2 pt.
Ghost Line - .25 pt.
Perimeter / Section / Emphasis Line - 1 pt.
Crossroads Park
Family Rec Center
Trap Club
Chamber/Visitor Info
Historic District
2"2"
7'-0" Minimum
1'-8"
Project: DD1039 Rock SpringsSign Type: V5Description: Elevation and plan viewScale: 1/2”=1’-0”
2"2"
7'-0" Minimum
1'-8"
10" 10"
Section 3Drawings V6Elevations
.125” thick aluminum sheet. Edges finished smooth. Through-bolt welded to sign panel and fastened through round pole with tamper proof nut. Exposed nut and bolt painted to match pole color. Back of sign panels painted to match front background color.
Tamper proof bolt. Paint to match substrate.
Finish with primer and Matthews enamel paint. See chart on page 2.6
1
1 FRONT ELEVATIONSCALE: 1/2”=1’-0”
23.45
3 FRONT ELEVATIONSCALE: 1/2”=1’-0”
4 SIDE ELEVATIONSCALE: 1/2”=1’-0”
1
2 SIDE ELEVATIONSCALE: 1/2”=1’-0”
1
43.45
P3
P5
P-
2
2
3
Project:
Sheet Description:
Project Number: Page:
DD1039
Wayfinding ProgramBid Documents
Phase
City of Rock Springs
Prepared for:
Date:
October, 2009
© 2009 Destination Development International, Inc. (DDI)
All rights reserved. This material is the property of DDI.
The recipient acknowledges that this material is
proprietary and agrees not to use or disclose this
material, or to make copies, without the written consent
of DDI, as long as the material remains confidential
and property known only by DDI and authorized
recipients. These drawings are meant for Design
Intent only and are not for construction. All
dimensions and site conditions shall be verified by
the Sign Contractor. DDI shall be notified of any
and all discrepancies, variations or substitutions
from these documents. Shop drawings, specification
details and samples shall be submitted to DDI
for approval prior to proceeding with fabrication.
All copy shall be proofread by the client and
legal requirements checked by their legal counsel.
Destination Development International, Inc.Florida Design Office 561.847.0868www.destinationdevelopment.com
3.46
3/8”=1’-0”1/4”=1’-0”3/16”=1’-0”1/8”=1’-0”
General Drawing Line - .5 pt.
Minor Detail Line - .25 pt.
Grade / Mounting Surface Line - 2 pt.
Ghost Line - .25 pt.
Perimeter / Section / Emphasis Line - 1 pt.
Project: DD1039 Rock SpringsSign Type: V5Description: Graphic DetailsScale: 1/2”=1’-0”
5 3/4"
4"
3 1/4"
1'-2"
7"
Section 3Drawings V6Graphics
1 GRAPHIC DETAILSCALE: 1”=1’-0”
P5
V1
V1
P3
Finish with primer and Matthews enamel paint. See chart on page 2.6
Exterior grade vinyl. See chart on page 2.6
P-
V-
3
Project:
Sheet Description:
Project Number: Page:
DD1039
Wayfinding ProgramBid Documents
Phase
City of Rock Springs
Prepared for:
Date:
October, 2009
© 2009 Destination Development International, Inc. (DDI)
All rights reserved. This material is the property of DDI.
The recipient acknowledges that this material is
proprietary and agrees not to use or disclose this
material, or to make copies, without the written consent
of DDI, as long as the material remains confidential
and property known only by DDI and authorized
recipients. These drawings are meant for Design
Intent only and are not for construction. All
dimensions and site conditions shall be verified by
the Sign Contractor. DDI shall be notified of any
and all discrepancies, variations or substitutions
from these documents. Shop drawings, specification
details and samples shall be submitted to DDI
for approval prior to proceeding with fabrication.
All copy shall be proofread by the client and
legal requirements checked by their legal counsel.
Destination Development International, Inc.Florida Design Office 561.847.0868www.destinationdevelopment.com
3.47
3/8”=1’-0”1/4”=1’-0”3/16”=1’-0”1/8”=1’-0”
General Drawing Line - .5 pt.
Minor Detail Line - .25 pt.
Grade / Mounting Surface Line - 2 pt.
Ghost Line - .25 pt.
Perimeter / Section / Emphasis Line - 1 pt.
PA R K I N G
1"
4"
3 1/2"
Project: DD1039 Rock SpringsSign Type: V6Description: ElevationsScale: 1/2”=1’-0”
1'-4"
7'-0"1'-9"
4'-9"
3'-6"
12'-9"
2'-7"
Section 3Drawings V6Elevations
1 FRONT ELEVATIONSCALE: 1/2”=1’-0”
33.47
2 REAR ELEVATIONSCALE: 1/2”=1’-0”
3 SIDE ELEVATIONSCALE: 1/2”=1’-0”
1
2 P9
1 P5
3 P1
1 P1
1
.125” thick aluminum sheet. Edges finished smooth.
Round steel pole.
Extruded aluminum mounting straps. Machine attached to poles. Threaded to receive screw.
Tamper proof bolt. Paint to match substrate.
Finish with primer and Matthews enamel paint. See chart on page 2.6
1
2
3
4
P-
4
3
Project:
Sheet Description:
Project Number: Page:
DD1039
Wayfinding ProgramBid Documents
Phase
City of Rock Springs
Prepared for:
Date:
October, 2009
© 2009 Destination Development International, Inc. (DDI)
All rights reserved. This material is the property of DDI.
The recipient acknowledges that this material is
proprietary and agrees not to use or disclose this
material, or to make copies, without the written consent
of DDI, as long as the material remains confidential
and property known only by DDI and authorized
recipients. These drawings are meant for Design
Intent only and are not for construction. All
dimensions and site conditions shall be verified by
the Sign Contractor. DDI shall be notified of any
and all discrepancies, variations or substitutions
from these documents. Shop drawings, specification
details and samples shall be submitted to DDI
for approval prior to proceeding with fabrication.
All copy shall be proofread by the client and
legal requirements checked by their legal counsel.
Destination Development International, Inc.Florida Design Office 561.847.0868www.destinationdevelopment.com
3.48
3/8”=1’-0”1/4”=1’-0”3/16”=1’-0”1/8”=1’-0”
General Drawing Line - .5 pt.
Minor Detail Line - .25 pt.
Grade / Mounting Surface Line - 2 pt.
Ghost Line - .25 pt.
Perimeter / Section / Emphasis Line - 1 pt.
PA R K I N G
Project: DD1039 Rock SpringsSign Type: V6Description: GraphicsScale: 1”=1’-0”
2'-8"8"
4 1/4"3"
3 1/2"2 1/8"
11"5 1/4"
Section 3Drawings V6Graphics
1 GRAPHIC DETAILSCALE: 1”=1’-0”
P5
P1
P7
V1
P3
P5
P1
V1
V1
P5
Finish with primer and Matthews enamel paint. See chart on page 2.6
Exterior grade vinyl. See chart on page 2.6
P-
V-
3
Section 4 Location Plans
Project:
Sheet Description:
Project Number: Page:
DD1039
Wayfinding ProgramBid Documents
City of Rock Springs
Prepared for:
Date:
September, 2009
Destination Development International, Inc.Florida Design Office 561.847.0868www.destinationdevelopment.com
4.1
Area Key:
Section 3DrawingsLocation PlansArea A
NOTE: Locations are approximate. Sign Contractor shall verify locations on site with City Representative prior to start of fabrication.
A B
C D
E F
K1.1
V1.43
V1.45
V1.50
V1.42
Project:
Sheet Description:
Project Number: Page:
DD1039
Wayfinding ProgramBid Documents
City of Rock Springs
Prepared for:
Date:
September, 2009
Destination Development International, Inc.Florida Design Office 561.847.0868www.destinationdevelopment.com
4.2
Area Key:
A B
C D
E F
Section 3DrawingsLocation PlansArea B
NOTE: Locations are approximate. Sign Contractor shall verify locations on site with City Representative prior to start of fabrication.
A9.3
V3.17
V2.35
V2.34
V1.33
V3.14
V3.15
V3.15
V1.31
A9.4
V3.18
V1.42
V3.21
Project:
Sheet Description:
Project Number: Page:
DD1039
Wayfinding ProgramBid Documents
City of Rock Springs
Prepared for:
Date:
September, 2009
Destination Development International, Inc.Florida Design Office 561.847.0868www.destinationdevelopment.com
4.3
Area Key:
A B
C D
E F
Section 3DrawingsLocation PlansArea C
NOTE: Locations are approximate. Sign Contractor shall verify locations on site with City Representative prior to start of fabrication.
V2.48V3.24
V2.40
V1.5K1.1V3.20
V2.41V3.25
V2.12
K1.1
V2.43
V1.8
Project:
Sheet Description:
Project Number: Page:
DD1039
Wayfinding ProgramBid Documents
City of Rock Springs
Prepared for:
Date:
September, 2009
Destination Development International, Inc.Florida Design Office 561.847.0868www.destinationdevelopment.com
4.4
Area Key:
Section 3DrawingsLocation PlansArea D
NOTE: Locations are approximate. Sign Contractor shall verify locations on site with City Representative prior to start of fabrication.
A B
C D
E FV2.14
K1.1
G1.1
A9.8
V2.44
V1.8 V2.13
V1.9
V3.9
V1.34
V3.8
V3.7
V3.11
A9.7
G1.1
G1.1
V2.25
V2.27
V1.16
V2.38
V3.4
V1.23
V2.31
V2.30
V3.3
V2.36
V2.32
V2.37
V1.39
V2.33
V1.30
V1.38
V3.10
V3.23
V3.22
A9.3
V3.15
V3.15 V3.18
V3.22
Project:
Sheet Description:
Project Number: Page:
DD1039
Wayfinding ProgramBid Documents
City of Rock Springs
Prepared for:
Date:
September, 2009
Destination Development International, Inc.Florida Design Office 561.847.0868www.destinationdevelopment.com
4.5
Area Key:
Section 3DrawingsLocation PlansArea E
NOTE: Locations are approximate. Sign Contractor shall verify locations on site with City Representative prior to start of fabrication.
A B
C D
E F
V1.35
V2.51
V2.46 V2.5
V2.53
V1.47
V1.48
V1.3
V1.51
V1.1
A9.5
V2.52
V1.7
V2.19
V3.19
G1.1
V2.45V2.8
V2.42
V2.9
V2.12
V2.10
K1.1
A3.1
V2.11
V1.11
V2.7
V2.6
K1.1
F1.1 F2.1
Project:
Sheet Description:
Project Number: Page:
DD1039
Wayfinding ProgramBid Documents
City of Rock Springs
Prepared for:
Date:
September, 2009
Destination Development International, Inc.Florida Design Office 561.847.0868www.destinationdevelopment.com
4.6
Area Key:
Section 4DrawingsLocation PlansArea E
NOTE: Locations are approximate. Sign Contractor shall verify locations on site with City Representative prior to start of fabrication.
A B
C D
E F
V4.4
G2.1
K1.1
K1.1
K1.1
V2.26
V1.15
V3.2
G2.1
G2.1
G2.1
G2.1
G2.1
V2.15
V3.1
V1.12
V2.16
V2.18
V1.29
V1.24
V1.28
V1.13
K1.1
G2.1
V2.23
V2.21
V2.29
V2.28
V2.24
V1.25
V1.20
V4.3
V2.22
A9.2
A9.1
A9.6
V2.17
V2.20
V1.26
V1.27
V1.10
V3.6V3.5
V4.2
V4.1
V2.47
V3.27V3.26
Message ScheduleSection 5
Project:
Sheet Description:
Project Number: Page:
DD1039
Wayfinding ProgramBid Documents
Phase
City of Rock Springs
Prepared for:
Date:
October, 2009
© 2009 Destination Development International, Inc. (DDI)
All rights reserved. This material is the property of DDI.
The recipient acknowledges that this material is
proprietary and agrees not to use or disclose this
material, or to make copies, without the written consent
of DDI, as long as the material remains confidential
and property known only by DDI and authorized
recipients. These drawings are meant for Design
Intent only and are not for construction. All
dimensions and site conditions shall be verified by
the Sign Contractor. DDI shall be notified of any
and all discrepancies, variations or substitutions
from these documents. Shop drawings, specification
details and samples shall be submitted to DDI
for approval prior to proceeding with fabrication.
All copy shall be proofread by the client and
legal requirements checked by their legal counsel.
Destination Development International, Inc.Florida Design Office 561.847.0868www.destinationdevelopment.com
4.8
Section 5 Message Schedule
Sign Type Face Message Comments Qty
A1.1 A (Street name) Street Identity (Traffic Signal Arm) Not currently placed on location plans. Sign Contractor shall fabricate but deliver signs and hardware to City to be installed by City personnel.
TBD
A2.1 A
B
(Street name)
(Street name)
Street Identity (City Wide)Not currently placed on location plans. Sign Contractor shall fabricate but deliver signs and hardware to City to be installed by City personnel.
TBD
A3.1 A
B
Historical District(Street name)
Historical District(Street name)
Hist Dist Street Identity (no signature, center mount)Not currently placed on location plans. Sign Contractor shall fabricate but deliver signs and hardware to City to be installed by City personnel.
TBD
A4.1 A
B
(Street name)
(Street name)
Hist Dist Street Identity (signature cap, center mount)Not currently placed on location plans. Sign Contractor shall fabricate but deliver signs and hardware to City to be installed by City personnel.
TBD
A5.1 A
B
Historical District(Street name)
Historical District(Street name)
Hist Dist Street Identity (signature cap, flag mount)Not currently placed on location plans. Sign Contractor shall fabricate but deliver signs and hardware to City to be installed by City personnel.
TBD
A6.1 A (City Logo) Brand Support TBD
A7.1 A (Bike Symbol) Bike Path Trail Marker TBD
A8.1 A (Chamber Logo) Freestanding monument to replace existing 1
A9.1 A Blairtown Park Ground monument or pole sign 1A9.2 A Bunning Park Ground monument or pole sign 1A9.3 A Century West Park Ground monument or pole sign 1A9.4 A Wild Horse Corrals Ground monument or pole sign 1A9.5 A Crossroads Park Ground monument or pole sign 1A9.6 A Palisades Park Ground monument or pole sign 1A9.7 A Veterans Park Ground monument or pole sign 1
A10.1 A
B
(Parking Symbol) Parking
(Parking Symbol) Parking
Parking Area Identity - Wall mounted TBD
A11.1 A (Historical Symbol) Historic Tour (locator number)
Walking Tour Trail Blaiser- Post and Panel TBD
Project:
Sheet Description:
Project Number: Page:
DD1039
Wayfinding ProgramBid Documents
Phase
City of Rock Springs
Prepared for:
Date:
October, 2009
© 2009 Destination Development International, Inc. (DDI)
All rights reserved. This material is the property of DDI.
The recipient acknowledges that this material is
proprietary and agrees not to use or disclose this
material, or to make copies, without the written consent
of DDI, as long as the material remains confidential
and property known only by DDI and authorized
recipients. These drawings are meant for Design
Intent only and are not for construction. All
dimensions and site conditions shall be verified by
the Sign Contractor. DDI shall be notified of any
and all discrepancies, variations or substitutions
from these documents. Shop drawings, specification
details and samples shall be submitted to DDI
for approval prior to proceeding with fabrication.
All copy shall be proofread by the client and
legal requirements checked by their legal counsel.
Destination Development International, Inc.Florida Design Office 561.847.0868www.destinationdevelopment.com
4.9
Section 5 Message Schedule
Sign Type Face Message Comments Qty
B1.1 A (Graphic TBD)(Rock Springs Logo)
Seasonal and event banners on poles and/or lamp posts. TBD
F1.1 Flag Pole 1
F2.1 (City Logo) Flag 1
G1.1 A (City Logo) Placed at primary city entrances 4
G2.1 A (Historic District Logo)Historical District(City Logo)
Placed at historic district entrances 7
K1.1 (Directory ID graphic)(Rock Springs Logo)(City street map with unique “You Are Here” icon)(Lockable display case)(Brochure holders)
Covered structure with solar panels to power lights 9
V1.1 A fg
Crossroads ParkTrap Club(City of Rock Springs Logo)
Medium vehicular signs. 2 to 3 line items. 1
V1.2 D E L E T E DV1.3 A k
kCrossroads ParkTrap Club(City of Rock Springs Logo)
Medium vehicular signs. 2 to 3 line items. 1
V1.4 D E L E T E DV1.5 A g
gTo (Interstate 80 Symbol)Historic District(City of Rock Springs Logo)
Medium vehicular signs. 2 to 3 line items. 1
V1.6 D E L E T E DV1.7 A h
gf
Chamber/Visitor InfoTo (Interstate 80 Symbol)Historic Union Square(City of Rock Springs Logo)
Medium vehicular signs. 2 to 3 line items. 1
V1.8 A fh
WWCC West EntranceHigh Desert Interp Center(City of Rock Springs Logo)
Medium vehicular signs. 2 to 3 line items. 1
V1.9 A hff
To (Interstate 80 Symbol)WWCC West EntranceHigh Desert Interp Center(City of Rock Springs Logo)
Medium vehicular signs. 2 to 3 line items. 1
V1.10 A gh
HospitalHistoric District(City of Rock Springs Logo)
Medium vehicular signs. 2 to 3 line items. 1
V1.11 A ggf
Chamber/Visitor InfoTo (Interstate 80 Symbol)Historic District(City of Rock Springs Logo)
Medium vehicular signs. 2 to 3 line items. 1
Project:
Sheet Description:
Project Number: Page:
DD1039
Wayfinding ProgramBid Documents
Phase
City of Rock Springs
Prepared for:
Date:
October, 2009
© 2009 Destination Development International, Inc. (DDI)
All rights reserved. This material is the property of DDI.
The recipient acknowledges that this material is
proprietary and agrees not to use or disclose this
material, or to make copies, without the written consent
of DDI, as long as the material remains confidential
and property known only by DDI and authorized
recipients. These drawings are meant for Design
Intent only and are not for construction. All
dimensions and site conditions shall be verified by
the Sign Contractor. DDI shall be notified of any
and all discrepancies, variations or substitutions
from these documents. Shop drawings, specification
details and samples shall be submitted to DDI
for approval prior to proceeding with fabrication.
All copy shall be proofread by the client and
legal requirements checked by their legal counsel.
Destination Development International, Inc.Florida Design Office 561.847.0868www.destinationdevelopment.com
4.10
Section 5 Message Schedule
Sign Type Face Message Comments QtyV1.12 A g
gh
Blairtown ParkDog ParkHistoric District(City of Rock Springs Logo)
Medium vehicular signs. 2 to 3 line items. 1
V1.13 A fg
To (Interstate 80 Symbol)Historic District(City of Rock Springs Logo)
Medium vehicular signs. 2 to 3 line items. 1
V1.15 A h hf
Veteran’s ParkTo (Interstate 80 Symbol)Hospital(City of Rock Springs Logo)
Medium vehicular signs. 2 to 3 line items. 1
V1.16 A gh
Veteran’s ParkTo (Interstate 80 Symbol)(City of Rock Springs Logo)
Medium vehicular signs. 2 to 3 line items. 1
V1.17 D E L E T E DV1.18 D E L E T E DV1.19 D E L E T E DV1.20 A h
hf
Bunning ParkTo (Interstate 80 Symbol)Hospital(City of Rock Springs Logo)
Medium vehicular signs. 2 to 3 line items. 1
V1.21 D E L E T E DV1.22 D E L E T E DV1.23 A g
fh
Civic CenterTo (Interstate 80 Symbol)To (HWY 430 Symbol)(City of Rock Springs Logo)
Medium vehicular signs. 2 to 3 line items. 1
V1.24 A fh
Palisades Park(Symbol) To Interstate 80(City of Rock Springs Logo)
Medium vehicular signs. 2 to 3 line items. 1
V1.25 A ffg
To (Interstate 80 Symbol)To (HWY 430 Symbol)Historic District (City of Rock Springs Logo)
Medium vehicular signs. 2 to 3 line items. 1
V1.26 A f Palisades Park(City of Rock Springs Logo)
Medium vehicular signs. 2 to 3 line items. 1
V1.27 A f South Side Belt Route(City of Rock Springs Logo)
Medium vehicular signs. 2 to 3 line items. 3
V1.28 A g Palisades Park(City of Rock Springs Logo)
Medium vehicular signs. 2 to 3 line items. 1
V1.29 A ghh
Palisades ParkBlairtown ParkHistoric District (City of Rock Springs Logo)
Medium vehicular signs. 2 to 3 line items. 1
V1.30 A gg f
Events ComplexGolf CourseHistoric District (City of Rock Springs Logo)
Medium vehicular signs. 2 to 3 line items. 1
V1.31 A h jj
Wild Horse CorralsEvents ComplexGolf Course(City of Rock Springs Logo)
Medium vehicular signs. 2 to 3 line items. 1
Project:
Sheet Description:
Project Number: Page:
DD1039
Wayfinding ProgramBid Documents
Phase
City of Rock Springs
Prepared for:
Date:
October, 2009
© 2009 Destination Development International, Inc. (DDI)
All rights reserved. This material is the property of DDI.
The recipient acknowledges that this material is
proprietary and agrees not to use or disclose this
material, or to make copies, without the written consent
of DDI, as long as the material remains confidential
and property known only by DDI and authorized
recipients. These drawings are meant for Design
Intent only and are not for construction. All
dimensions and site conditions shall be verified by
the Sign Contractor. DDI shall be notified of any
and all discrepancies, variations or substitutions
from these documents. Shop drawings, specification
details and samples shall be submitted to DDI
for approval prior to proceeding with fabrication.
All copy shall be proofread by the client and
legal requirements checked by their legal counsel.
Destination Development International, Inc.Florida Design Office 561.847.0868www.destinationdevelopment.com
4.11
Section 5 Message Schedule
Sign Type Face Message Comments QtyV1.32 D E L E T E DV1.33 A f
kk
Wild Horse Corrals To (Interstate 80 Symbol)Historic District(City of Rock Springs Logo)
Medium vehicular signs. 2 to 3 line items. 1
V1.34 A fg
Centennial ParkCity Maintenance(City of Rock Springs Logo)
Medium vehicular signs. 2 to 3 line items. 1
V1.35 A h f
LibraryCrossroads Park(City of Rock Springs Logo)
Medium vehicular signs. 2 to 3 line items. 1
V1.36 M O V E D T O V 2 . 53V1.37 M O V E D T O V 2 . 5 1V1.38 A f Century West Park
(City of Rock Springs Logo)Medium vehicular signs. 2 to 3 line items. 1
V1.39 A fhh
Century West ParkTo (Interstate 80 Symbol)Historic District(City of Rock Springs Logo)
Medium vehicular signs. 2 to 3 line items. 1
V1.40 M O V E D T O V 3 . 2 4V1.41 M O V E D T O V 3 . 2 5V1.42 A h
hEvents Complex Golf Course(City of Rock Springs Logo)
Medium vehicular signs. 2 to 3 line items. 1
V1.43 A gf
Golf CourseHistoric District(City of Rock Springs Logo)
Medium vehicular signs. 2 to 3 line items. 1
V1.44 A ff
Events Complex Historic District(City of Rock Springs Logo)
Medium vehicular signs. 2 to 3 line items. 1
V1.45 A gh
Events Complex Golf Course(City of Rock Springs Logo)
Medium vehicular signs. 2 to 3 line items. 1
V1.47 A fg
Family Rec CenterCrossroads Park(City of Rock Springs Logo)
Medium vehicular signs. 2 to 3 line items. 1
V1.48 A h fg
Family Rec CenterLibraryShopping(City of Rock Springs Logo)
Medium vehicular signs. 2 to 3 line items. 1
V1.49 M O V E D T O V 2 . 5 2V1.50 A g
gGolf CourseFishing Pond(City of Rock Springs Logo)
Medium vehicular signs. 2 to 3 line items. 1
V1.51 A jjj
LibraryFamily Rec CenterShopping(City of Rock Springs Logo)
Medium vehicular signs. 2 to 3 line items. 1
Project:
Sheet Description:
Project Number: Page:
DD1039
Wayfinding ProgramBid Documents
Phase
City of Rock Springs
Prepared for:
Date:
October, 2009
© 2009 Destination Development International, Inc. (DDI)
All rights reserved. This material is the property of DDI.
The recipient acknowledges that this material is
proprietary and agrees not to use or disclose this
material, or to make copies, without the written consent
of DDI, as long as the material remains confidential
and property known only by DDI and authorized
recipients. These drawings are meant for Design
Intent only and are not for construction. All
dimensions and site conditions shall be verified by
the Sign Contractor. DDI shall be notified of any
and all discrepancies, variations or substitutions
from these documents. Shop drawings, specification
details and samples shall be submitted to DDI
for approval prior to proceeding with fabrication.
All copy shall be proofread by the client and
legal requirements checked by their legal counsel.
Destination Development International, Inc.Florida Design Office 561.847.0868www.destinationdevelopment.com
4.12
Section 5 Message Schedule
Sign Type Face Message Comments QtyV2.1 A f
hgg
LibraryFamily Rec CenterTo (Interstate 80 Symbol)Historic District(City of Rock Springs Logo)
Large vehicular signs. 4 to 5 line items. 1
V2.4 A ffgg
Crossroads ParkTrap ClubLibraryFamily Rec Center(City of Rock Springs Logo)
Large vehicular signs. 4 to 5 line items. 1
V2.5 A g gg ff
LibraryFamily Rec CenterShoppingChamber/Visitor Info Historic District(City of Rock Springs Logo)
Large vehicular signs. 4 to 5 line items. 1
V2.6 A fffgg
Family Rec CenterTrap ClubShoppingChamber/Visitor Info Historic District(City of Rock Springs Logo)
Large vehicular signs. 4 to 5 line items. 1
V2.7 A gfffh
Chamber/Visitor InfoWWCCHigh Desert Interp Center Dinosaur ExhibitHistoric District(City of Rock Springs Logo)
Large vehicular signs. 4 to 5 line items. 1
V2.8 A ggggg
To (Interstate 80 Symbol)Historic DistrictWWCCHigh Desert Interp Center Dinosaur Exhibit(City of Rock Springs Logo)
Large vehicular signs. 4 to 5 line items. 1
V2.9 A g hhh
HospitalWWCCHigh Desert Interp Center Dinosaur Exhibit(City of Rock Springs Logo)
Large vehicular signs. 4 to 5 line items.
1
V2.10 A ffggg
Historic DistrictTo (Interstate 80 Symbol)WWCCHigh Desert Interp Center Dinosaur Exhibit(City of Rock Springs Logo)
Large vehicular signs. 4 to 5 line items. 1
V2.11 A fhhh
HospitalChamber/Visitor Info Historic DistrictTo (Interstate 80 Symbol)(City of Rock Springs Logo)
Large vehicular signs. 4 to 5 line items. 1
V2.12 A ghhh
High Desert Interp CenterWWCC West EntranceWWCC Main Entrance Dinosaur Exhibit(City of Rock Springs Logo)
Large vehicular signs. 4 to 5 line items. 1
Project:
Sheet Description:
Project Number: Page:
DD1039
Wayfinding ProgramBid Documents
Phase
City of Rock Springs
Prepared for:
Date:
October, 2009
© 2009 Destination Development International, Inc. (DDI)
All rights reserved. This material is the property of DDI.
The recipient acknowledges that this material is
proprietary and agrees not to use or disclose this
material, or to make copies, without the written consent
of DDI, as long as the material remains confidential
and property known only by DDI and authorized
recipients. These drawings are meant for Design
Intent only and are not for construction. All
dimensions and site conditions shall be verified by
the Sign Contractor. DDI shall be notified of any
and all discrepancies, variations or substitutions
from these documents. Shop drawings, specification
details and samples shall be submitted to DDI
for approval prior to proceeding with fabrication.
All copy shall be proofread by the client and
legal requirements checked by their legal counsel.
Destination Development International, Inc.Florida Design Office 561.847.0868www.destinationdevelopment.com
4.13
Section 5 Message Schedule
Sign Type Face Message Comments QtyV2.13 A f
gggg
To (Interstate 80 Symbol)WWCC Main Entrance Dinosaur ExhibitHospitalHistoric District(City of Rock Springs Logo)
Large vehicular signs. 4 to 5 line items. 1
V2.14 A gghhh
WWCC West EntranceHigh Desert Interp CenterWWCC Main EntranceDinosaur ExhibitHospital(City of Rock Springs Logo)
Large vehicular signs. 4 to 5 line items. 1
V2.15 A fffg
WWCCHigh Desert Interp Center Dinosaur ExhibitHistoric District(City of Rock Springs Logo)
Large vehicular signs. 4 to 5 line items. 1
V2.16 A fhhh
HospitalWWCCHigh Desert Interp Center Dinosaur Exhibit(City of Rock Springs Logo)
Large vehicular signs. 4 to 5 line items. 1
V2.17 A hhhff
HospitalChamber/Visitor InfoTo (Interstate 80 Symbol)Blairtown ParkDog Park(City of Rock Springs Logo)
Large vehicular signs. 4 to 5 line items. 1
V2.18 A gggh
WWCCHigh Desert Interp CenterDinosaur ExhibitTo (Interstate 80 Symbol)(City of Rock Springs Logo)
Large vehicular signs. 4 to 5 line items. 1
V2.19 A fgggg
Chamber/Visitor InfoHospitalWWCCHigh Desert Interp CenterDinosaur Exhibit(City of Rock Springs Logo)
Large vehicular signs. 4 to 5 line items. 1
V2.20 A ffffh
HospitalWWCCHigh Desert Interp CenterDinosaur ExhibitHistoric District(City of Rock Springs Logo)
Large vehicular signs. 4 to 5 line items. 1
V2.21 A gggff
Bunning ParkMuseumHistoric DistrictHospitalWWCC(City of Rock Springs Logo)
Large vehicular signs. 4 to 5 line items. 1
Project:
Sheet Description:
Project Number: Page:
DD1039
Wayfinding ProgramBid Documents
Phase
City of Rock Springs
Prepared for:
Date:
October, 2009
© 2009 Destination Development International, Inc. (DDI)
All rights reserved. This material is the property of DDI.
The recipient acknowledges that this material is
proprietary and agrees not to use or disclose this
material, or to make copies, without the written consent
of DDI, as long as the material remains confidential
and property known only by DDI and authorized
recipients. These drawings are meant for Design
Intent only and are not for construction. All
dimensions and site conditions shall be verified by
the Sign Contractor. DDI shall be notified of any
and all discrepancies, variations or substitutions
from these documents. Shop drawings, specification
details and samples shall be submitted to DDI
for approval prior to proceeding with fabrication.
All copy shall be proofread by the client and
legal requirements checked by their legal counsel.
Destination Development International, Inc.Florida Design Office 561.847.0868www.destinationdevelopment.com
4.14
Section 5 Message Schedule
Sign Type Face Message Comments QtyV2.22 A f
ggg
Bunning ParkHistoric DistrictMuseumCity Hall(City of Rock Springs Logo)
Large vehicular signs. 4 to 5 line items. 1
V2.23 A fffgg
Historic DistrictBunning ParkMuseumHospitalWWCC(City of Rock Springs Logo)
Large vehicular signs. 4 to 5 line items. 1
V2.24 A ggggf
Bunning ParkHistoric DistrictMuseumCity HallTo (Interstate 80 Symbol)(City of Rock Springs Logo)
Large vehicular signs. 4 to 5 line items. 1
V2.25 A fhhhh
Civic CenterBunning ParkHistoric DistrictMuseumCity Hall(City of Rock Springs Logo)
Large vehicular signs. 4 to 5 line items. 1
V2.26 A k hhhh
HospitalBunning ParkHistoric District MuseumCity Hall(City of Rock Springs Logo)
Large vehicular signs. 4 to 5 line items. 1
V2.27 A gffff
To (Interstate 80 Symbol)HospitalHistoric District MuseumCity Hall(City of Rock Springs Logo)
Large vehicular signs. 4 to 5 line items. 1
V2.28 A ghhh
HospitalHistoric DistrictMuseumCity Hall(City of Rock Springs Logo)
Large vehicular signs. 4 to 5 line items. 1
V2.29 A hhhhh
To (Interstate 80 Symbol)HospitalWWCCHigh Desert Interp CenterDinosaur Exhibit(City of Rock Springs Logo)
Large vehicular signs. 4 to 5 line items. 1
V2.30 A h gggf
Civic CenterHistoric District MuseumCity Hall(Symbol) To HWY 430(City of Rock Springs Logo)
Large vehicular signs. 4 to 5 line items. 1
Project:
Sheet Description:
Project Number: Page:
DD1039
Wayfinding ProgramBid Documents
Phase
City of Rock Springs
Prepared for:
Date:
October, 2009
© 2009 Destination Development International, Inc. (DDI)
All rights reserved. This material is the property of DDI.
The recipient acknowledges that this material is
proprietary and agrees not to use or disclose this
material, or to make copies, without the written consent
of DDI, as long as the material remains confidential
and property known only by DDI and authorized
recipients. These drawings are meant for Design
Intent only and are not for construction. All
dimensions and site conditions shall be verified by
the Sign Contractor. DDI shall be notified of any
and all discrepancies, variations or substitutions
from these documents. Shop drawings, specification
details and samples shall be submitted to DDI
for approval prior to proceeding with fabrication.
All copy shall be proofread by the client and
legal requirements checked by their legal counsel.
Destination Development International, Inc.Florida Design Office 561.847.0868www.destinationdevelopment.com
4.15
Section 5 Message Schedule
Sign Type Face Message Comments QtyV2.31 A f
ghhh
Civic CenterTo (Interstate 80 Symbol)Historic District MuseumCity Hall(City of Rock Springs Logo)
Large vehicular signs. 4 to 5 line items. 1
V2.32 A hhggg
High Desert Interp CenterDinosaur ExhibitEvents ComplexGolf CourseWild Horse Loop(City of Rock Springs Logo)
Large vehicular signs. 4 to 5 line items. 1
V2.33 A ghhh
Century West ParkWild Horse LoopSand DunesPetroglyphs(City of Rock Springs Logo)
Large vehicular signs. 4 to 5 line items. 1
V2.34 A gghh
Events ComplexGolf CourseTo (Interstate 80 Symbol)Historic District(City of Rock Springs Logo)
Large vehicular signs. 4 to 5 line items. 2
V2.35 A ffff
Events ComplexGolf CourseTo (Interstate 80 Symbol)Historic District(City of Rock Springs Logo)
Large vehicular signs. 4 to 5 line items. 1
V2.36 A fffff
Century West ParkWild Horse CorralsEvents Complex Golf CourseWild Horse Loop(City of Rock Springs Logo)
Large vehicular signs. 4 to 5 line items. 1
V2.37 A hhfff
Events Complex Golf CourseWWCCHigh Desert Interp CenterDinosaur Exhibit(City of Rock Springs Logo)
Large vehicular signs. 4 to 5 line items. 1
V2.38 A g gggg
High Desert Interp CenterEvents ComplexWild Horse LoopSand DunesPetroglyphs(City of Rock Springs Logo)
Large vehicular signs. 4 to 5 line items. 1
V2.39 A fffh
WWCCDinosaur ExhibitHigh Desert Interp CenterFamily Rec Center(City of Rock Springs Logo)
Large vehicular signs. 4 to 5 line items. 1
V2.40 A gggf
Wild Horse CorralsEvents Complex Golf CourseFamily Rec Center(City of Rock Springs Logo)
Large vehicular signs. 4 to 5 line items. 1
Project:
Sheet Description:
Project Number: Page:
DD1039
Wayfinding ProgramBid Documents
Phase
City of Rock Springs
Prepared for:
Date:
October, 2009
© 2009 Destination Development International, Inc. (DDI)
All rights reserved. This material is the property of DDI.
The recipient acknowledges that this material is
proprietary and agrees not to use or disclose this
material, or to make copies, without the written consent
of DDI, as long as the material remains confidential
and property known only by DDI and authorized
recipients. These drawings are meant for Design
Intent only and are not for construction. All
dimensions and site conditions shall be verified by
the Sign Contractor. DDI shall be notified of any
and all discrepancies, variations or substitutions
from these documents. Shop drawings, specification
details and samples shall be submitted to DDI
for approval prior to proceeding with fabrication.
All copy shall be proofread by the client and
legal requirements checked by their legal counsel.
Destination Development International, Inc.Florida Design Office 561.847.0868www.destinationdevelopment.com
4.16
Section 5 Message Schedule
Sign Type Face Message Comments QtyV2.41 A h
fff
Family Rec CenterLibraryCrossroads ParkTo (Interstate 80 Symbol)(City of Rock Springs Logo)
Large vehicular signs. 4 to 5 line items. 1
V2.42 A hhhh
High Desert Interp CenterWWCC West EntranceWWCC Main Entrance Dinosaur Exhibit(City of Rock Springs Logo)
Large vehicular signs. 4 to 5 line items. 1
V2.43 A gfff
Family Rec CenterWWCCDinosaur ExhibitHigh Desert Interp Center(City of Rock Springs Logo)
Large vehicular signs. 4 to 5 line items. 1
V2.44 A ffhh
WWCC Main Entrance Dinosaur ExhibitWWCC West EntranceHigh Desert Interp Center(City of Rock Springs Logo)
Large vehicular signs. 4 to 5 line items. 1
V2.45 A gfhhh
Historic DistrictTo (Interstate 80 Symbol)WWCCHigh Desert Interp Center Dinosaur Exhibit(City of Rock Springs Logo)
Large vehicular signs. 4 to 5 line items. 1
V2.46 A hhff
LibraryFamily Rec CenterCrossroads Park Trap Club(City of Rock Springs Logo)
Large vehicular signs. 4 to 5 line items. 1
V2.47 A gggg
WWCCHigh Desert Interp Center Dinosaur ExhibitTo (Interstate 80 Symbol)(City of Rock Springs Logo)
Large vehicular signs. 4 to 5 line items. 1
V2.48 A f ffh
WWCCHigh Desert Interp CenterDinosaur ExhibitFamily Rec Center(City of Rock Springs Logo)
Large vehicular signs. 4 to 5 line items. 1
V2.49 A hhjj
Wild Horse CorralsPetroglyphsEvents ComplexGolf Course(City of Rock Springs Logo)
Large vehicular signs. 4 to 5 line items. 1
V2.50 M O V E D T O V 1 . 5 1V2.51 A g
gff
LibraryFamily Rec CenterCrossroads ParkTrap Club(City of Rock Springs Logo)
Large vehicular signs. 4 to 5 line items. 1
Project:
Sheet Description:
Project Number: Page:
DD1039
Wayfinding ProgramBid Documents
Phase
City of Rock Springs
Prepared for:
Date:
October, 2009
© 2009 Destination Development International, Inc. (DDI)
All rights reserved. This material is the property of DDI.
The recipient acknowledges that this material is
proprietary and agrees not to use or disclose this
material, or to make copies, without the written consent
of DDI, as long as the material remains confidential
and property known only by DDI and authorized
recipients. These drawings are meant for Design
Intent only and are not for construction. All
dimensions and site conditions shall be verified by
the Sign Contractor. DDI shall be notified of any
and all discrepancies, variations or substitutions
from these documents. Shop drawings, specification
details and samples shall be submitted to DDI
for approval prior to proceeding with fabrication.
All copy shall be proofread by the client and
legal requirements checked by their legal counsel.
Destination Development International, Inc.Florida Design Office 561.847.0868www.destinationdevelopment.com
4.17
Section 5 Message Schedule
Sign Type Face Message Comments QtyV2.52 A g
ggg
LibraryFamily Rec CenterCrossroads ParkTrap Club(City of Rock Springs Logo)
Large vehicular signs. 4 to 5 line items. 1
V2.53 A hhff
LibraryCrossroads ParkShoppingTo (Interstate 80 Symbol)Historic District(City of Rock Springs Logo)
Large vehicular signs. 4 to 5 line items. 1
V3.1 A f Blairtown Park(City of Rock Springs Logo)
Single line item vehicular signs. 1
V3.2 A g Blairtown Park(City of Rock Springs Logo)
Single message directional on pole 1
V3.3 A g Veterans Park(City of Rock Springs Logo)
Single message directional on pole 1
V3.4 A f Veterans Park(City of Rock Springs Logo)
Single message directional on pole 1
V3.5 A f Bunning Park(City of Rock Springs Logo)
Single message directional on pole 1
V3.6 A g Bunning Park(City of Rock Springs Logo)
Single message directional on pole 1
V3.7 A g Centennial Park(City of Rock Springs Logo)
Single message directional on pole 1
V3.8 A f Centennial Park(City of Rock Springs Logo)
Single message directional on pole 1
V3.9 A g Centennial Park(City of Rock Springs Logo)
Single message directional on pole 1
V3.10 A f City Maintenance(City of Rock Springs Logo)
Single message directional on pole 1
V3.11 A h Centennial Park(City of Rock Springs Logo)
Single message directional on pole 1
V3.12 D E L E T E DV3.13 C H A N G E D T O V 1. 5 0V3.14 A h To (US 191 Symbol)
(City of Rock Springs Logo)Single message directional on pole 1
V3.15 A g Century West Park(City of Rock Springs Logo)
Single message directional on pole 2
V3.16 A h Wild Horse Corrals(City of Rock Springs Logo)
Single message directional on pole 1
V3.17 A g Wild Horse Corrals(City of Rock Springs Logo)
Single message directional on pole 1
V3.18 A f Historic District(City of Rock Springs Logo)
Single message directional on pole 1
V3.19 A f Chamber/Visitor Info(City of Rock Springs Logo)
Single message directional on pole 1
V3.20 A f Family Rec Center(City of Rock Springs Logo)
Single message directional on pole 1
Project:
Sheet Description:
Project Number: Page:
DD1039
Wayfinding ProgramBid Documents
Phase
City of Rock Springs
Prepared for:
Date:
October, 2009
© 2009 Destination Development International, Inc. (DDI)
All rights reserved. This material is the property of DDI.
The recipient acknowledges that this material is
proprietary and agrees not to use or disclose this
material, or to make copies, without the written consent
of DDI, as long as the material remains confidential
and property known only by DDI and authorized
recipients. These drawings are meant for Design
Intent only and are not for construction. All
dimensions and site conditions shall be verified by
the Sign Contractor. DDI shall be notified of any
and all discrepancies, variations or substitutions
from these documents. Shop drawings, specification
details and samples shall be submitted to DDI
for approval prior to proceeding with fabrication.
All copy shall be proofread by the client and
legal requirements checked by their legal counsel.
Destination Development International, Inc.Florida Design Office 561.847.0868www.destinationdevelopment.com
4.18
Section 5 Message Schedule
Sign Type Face Message Comments QtyV3.21 A h Wild Horse Corrals
(City of Rock Springs Logo)Single message directional on pole 1
V3.22 A g Civic Center(City of Rock Springs Logo)
Single message directional on pole 2
V3.23 A f Civic Center(City of Rock Springs Logo)
Single message directional on pole 1
V3.24 A f Family Rec Center(City of Rock Springs Logo)
Single message directional on pole 1
V3.25 A g Family Rec Center(City of Rock Springs Logo)
Single message directional on pole 1
V3.26 A g Dog Park(City of Rock Springs Logo)
Single message directional on pole 1
V3.27 A f Dog Park(City of Rock Springs Logo)
Single message directional on pole 1
V4.1 A ff
MuseumCity Hall
Historical District Signage 1
V4.2 A ggf
MuseumCity HallTo (Interstate 80 Symbol)
Historical District Signage 1
V4.3 A fg
MuseumTo (Interstate 80 Symbol)
Historical District Signage 1
V4.4 A h To (Interstate 80 Symbol) Historical District Signage 1
V5.1 A f (Parking Symbol)Parking
Post and Panel TBD
V5.2 A h (Parking Symbol)Parking
Post and Panel TBD
V5.3 A g (Parking Symbol)Parking
Post and Panel TBD
V6.1 A f (Parking Symbol) Panels mounted to V1 and V2 type signs TBDV6.2 A h (Parking Symbol) Panels mounted to V1 and V2 type signs TBDV6.3 A g (Parking Symbol) Panels mounted to V1 and V2 type signs TBD
Destination Development International, Inc.Florida Design Office
City of Rock Springs Wayfinding Program
DD1039
Wayfinding Plan
October, 2009