Royal Roll-Up Banner Stands Various Widths: 31.5”, 33.5”, 39.4”, 47.25” Height 85“ (visible 79”) (bottom 6” will be used for mounting to the hardware and will not be visible. Bleed graphic to bottom dimension but keep important info above the 79“ mark) Include fonts or convert them to outline. Use vector logos when possible. Image resolution required is 75PPI (pixels per inch) at full size. 31.5” 33.5” 39.4” 47.25” Height 85“ (visible 79”) This area will be used for mounting to the hardware and will not be visible.
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Royal Roll-Up Banner StandsVarious Widths:31.5”, 33.5”, 39.4”, 47.25”
Height 85“ (visible 79”)
(bottom 6” will be used for mounting to the hardware and will not be visible. Bleed graphic to bottom dimension but keep important info above the 79“ mark)
Include fonts or convert them to outline.Use vector logos when possible.
Image resolution required is 75PPI (pixels per inch) at full size.
31.5”
33.5”
39.4”
47.25”
Hei
ght 8
5“ (v
isib
le 7
9”)
This area will be used for mounting to the hardware and will not be visible.
Related Documents
