59.5 112 45 20° 102 max. 30 50 G ½ 59.5 112 45 20° 102 max. 30 50 G ½ 59.5 112 45 20° 102 max. 30 50 G ½ TX 111 LRYA "ROYAL CROWN" Lavatory Faucet (Cold Only) "ROYAL CROWN" LAVATORY FAUCET ( COLD ONLY ) S06101N TX 111 LRYN "ROYAL CROWN" Lavatory Faucet (Cold Only) TX 111 LRYR "ROYAL CROWN" Lavatory Faucet (Cold Only) Packing 1. AERATOR 3. BOLT 2. CERAMIC HEAD WORK SPECIFICATIONS Always wipe chrome plated area with dry soft cloth, and sometimes wipe it with cloth soaked in mild soap. MAINTENANCE TROUBLESHOOTING ATTENTION CHECK POINT Flow rate unsatisfactory 1 Release PROBLEM SOLUTION INSTALLATION Water leaks around the handle Tighten 2 OPERATING CONDITIONS Water supply pressure : 0.05 ~ 0.75 MPa. 1. 2. Ensure that water supply is clean ( No Sand, Dirt, Etc.). Use of abbrasive cleaning material suck as; detergents containing hydrochloric acids, thinner, polishing powder, and nylon brush is not recommended Handle is Loose Tighten 3 Lock Nut Grip Washer Faucet Lavatory Hole Ø25 R4 TX111LRY 59.5 112 45 20° 102 max. 30 50 G ½ 59.5 112 45 20° 102 max. 30 50 G ½ 59.5 112 45 20° 102 max. 30 50 G ½ TX 111 LRYA "ROYAL CROWN" Lavatory Faucet (Cold Only) "ROYAL CROWN" LAVATORY FAUCET ( COLD ONLY ) S06101N TX 111 LRYN "ROYAL CROWN" Lavatory Faucet (Cold Only) TX 111 LRYR "ROYAL CROWN" Lavatory Faucet (Cold Only) Packing 1. AERATOR 3. BOLT 2. CERAMIC HEAD WORK SPECIFICATIONS Always wipe chrome plated area with dry soft cloth, and sometimes wipe it with cloth soaked in mild soap. MAINTENANCE TROUBLESHOOTING ATTENTION CHECK POINT Flow rate unsatisfactory 1 Release PROBLEM SOLUTION INSTALLATION Water leaks around the handle Tighten 2 OPERATING CONDITIONS Water supply pressure : 0.05 ~ 0.75 MPa. 1. 2. Ensure that water supply is clean ( No Sand, Dirt, Etc.). Use of abbrasive cleaning material suck as; detergents containing hydrochloric acids, thinner, polishing powder, and nylon brush is not recommended Handle is Loose Tighten 3 Lock Nut Grip Washer Faucet Lavatory Hole Ø25 R4 TX111LRY