Roll-off container covers are a lightweight, durable, affordable solution for covering the contents of roll-off containers. • Opens to 90 degrees for easy access to entire container • Locks to protect container from theft and unauthorized dumping ROLL-OFF CONTAINER COVERS FEATURES & BENEFITS • Built with UV-protected, impact-resistant high-density polyethylene (HDPE) • Standard design is permanently mounted and travels with the container at all times Meets EPA regulations for storm water exposure.
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Roll-off container covers are a lightweight, durable, affordable solution for covering the contents of roll-off containers.
• Opens to 90 degrees for easy access to entire container
• Locks to protect container from theft and unauthorized dumping
ROLL-OFF CONTAINER COVERS
FEATURES & BENEFITS• Built with UV-protected, impact-resistant
high-density polyethylene (HDPE)
• Standard design is permanently mounted and travels with the container at all times
Meets EPA regulations for
storm water exposure.
Available in 3 Custom Configurations:
StandardCover is permanently mounted and travels with the container.
1
2 RemovableCover can be easily transferred to other containers with a forklift.
3 Stand-aloneCover is mounted on a frame that’s attached to concrete slab or footing. This stand-alone configuration allows containers to be swapped out from underneath cover.
ROLL-OFF CONTAINER COVERS
(Optional 5’ guide rails with stops available)
Integrated forklift pockets molded into cover make transferring fast and easy.
Opens to 90 degrees for access to entire container.
ROLL-OFF CONTAINER COVERS
Ability to maintain total container functionality even when cover is securely fastened.
Locks to keep contents
safe and prevent unauthorized
dumping.
1
1
2
2
3
3
4
4
A A
B B
SHEET 1 OF 1
DRAWN
APPROVED
TJB 2/11/2015
DWG NO
CoverFrameAssly1
TITLE
COVER/FRAME ASSEMBLY
SIZE
B
SCALE
REV
A
TOLERANCES UNLESS SPECIFIED
UNITS = INCHES
X.X ` 0.1
X.XX ` 0.06
X.XXX ` 0.030
X.XXXX ` 0.0010
FRACTIONS ` 1/16
ANGLES ` 0.5°
THIS PRINT IS THE PROPERTY OF TB INDUSTRIES, INC. THIS DRAWING REPRESENTS
A PROPRIETARY ARTICLE(S) IN WHICH TB INDUSTRIES, INC. RETAINS ALL AND ANY
RIGHTS, PATENT(S) OR OTHERWISE, TO INCLUDE EXCLUSIVE RIGHTS TO USE,
MANUFACTURE, AND/OR SELL. POSESSION OF THIS PRINT DOES NOT CONVEY ANY
PERMISSION TO REPRODUCE PRINT OR MANUFACTURE THE ARTICLE(S) SHOWN
HERE-IN. SUCH PERMISSION MAY ONLY BE GRANTED BY SPECIFIC AUTHORIZATION
IN WRITING, SIGNED BY AN AUTHORIZED AGENT OF TB INDUSTRIES, INC.
SPECIFICATIONS MAY NOT BE ALTERED OR SUBSTITUED WITHOUT WRITTEN