ROBUSTA PM HD Automatic horizontal sliding car door Designed for high traffic intallations DOC-FECMCBPRHC00EN ONGOING VERSION: 07-03-2014 Commercial Service lifts
ROBUSTA PM HDAutomatic horizontal sliding car doorDesigned for high traffic intallations
DOC-FECMCBPRHC00EN
ONGOING VERSION: 07-03-2014
Commercial Service lifts
www.fermator.com 2Robusta PM HD
Door configuration
STANDARDS
Opening EN 81-21Existing buildings
EN 81-41Impaired mobility
EN 81-71Vandal resistance lifts EN 81-72
Firefighters liftsCat. I Cat. IIC2 - C4 - C6T1 - T2 - T3
PROTECTION
Opening
IP21Protection against a solid
foreign body of 12.5 mm or more in diameter and protected against vertically falling drops
of water.
IPX3Protected against
sprays of water up to 60 degrees from the vertical.
IP54Protection against dust and protected against water
splashed from all directions.
IP65Sealed against dust and protected against jets of water from all directions.
EExExplosion proof, Group II (surface industries) and Category 2 (explosive
atmosphere between 10 and 1000 hrs/yr).
Magnetic contact Mechanical contactC2 - C4 - C6T1 - T2 - T3
SAFETY DEVICES
Opening Photocell Photoelectric barrier
Emergency power supply BatteryVVVF5 VVVF6 VVVF5 VVVF6
C2 - C4- C6T1 - T2 - T3
Available Not available Ask to commercial department
SILLSType of sill Reinforced aluminium sill
Profile detail
Availability Heated sill option
Dust holes Sill support
PANELS
Opening
Steel panels Glass panelsMetal sheet
Double skin Vision Wien type
visionBevel big
visionFlush big
vision Full glass Full glass hidden trims
Aluminium glass
WC2 - C4 - C6T1 - T2 - T3
APPLICATION RANGEOpening Clear opening - CO (mm) Clear height - CH (mm)
C2 800 - 1400
1800 - 4000C4 1200 - 3000C6 1800 - 4000
T1 - T2 800 - 1400T3 1000 - 2000
LIFT APPLICATION Door cycles per year: Higher than 2.500.000.Traffic peak of the door: Up to 360 cycles per hour.
Traffic lift speed: Higher than 4 m/s.Comfort level:
www.fermator.com3 Robusta PM HD
Door configuration
Available Not available Ask to commercial department
PANEL REGULATION SUPPORT AND PANEL GUIDE
Type of panel regulation support Direct fastening
Type of panel guide Plus
COMPATIBILITY
Case Robusta HD Landing doorCoupling Asymmetric skate
Unlocking zone +102 / -123All dimensions in mm.
Toe guardType Standard Big
H 270 750
Thickness 1 1,5Range All
All dimensions in mm.
www.fermator.com 4Robusta PM HD
T2 operator
DRIVEType Synchronous brushless permanent magnets motor.
Efficiency 80 %.Consumptions Standby 4W / Average per cycle 50 W.
ELECTRONIC MODULEType VVVF5 and VVVF6.
Adjustable parameters via PC / Console / Smartphone.Working signals available From 12 V to 240 V AC/DC or with BUS CAN.
Opening speed Up to 1 m/s (Regulable).Closing speed Up to 0,4 m/s. Auto-adjustable directly with the panel weight.
Re-opening Integrated with auto-adjustable cycles.
OTHER FEATURESNoise level < 51 dB.Total weight Reference: T2 CO 800 mm CH 2000 mm, with metal sheet panels - 113 kg.
Maximum moving mass 360 kg.Locking device Available car door lock type.
INSTALLATIONPre-adjusted and tested to simplify the installation.
Frontal concept, all parts within the sill projection, allows fixing directly to the front or by brackets.
Technical features
Transmission Geared.STD8 belt.
www.fermator.com5 Robusta PM HD
Technical drawing 2 panel centre parting door
75 mm sill
- All dimensions in mm.
Notes:
CARFLOOR
7575
9060CO120 120
30
CO/2= =CO/2150150
530
5
H
7075
530
Con
cent
ricØ
92
2CO + 100
CO= =
160
CO/2 + 20
2CO + 100
137,
520
0
Ecc
entri
cØ
26
75 20
CH
+ 4
20
CH
+ 2
20+4
0- 4
0
410,
5
200
CH
+ 1
0
CH
100
MECHANICALDETAILS
SILLDETAIL
thickness4
thickness3
www.fermator.com 6Robusta PM HD
CH
+ 1
075
7575
100
3060120 120CO
75 20
CH
+ 4
20C
H +
220
CH
+40
- 40
CARFLOOR
530
5
H
70
75
160
50
15
CO
410,
5
200
2CO + 100
CO36,5
Con
cent
ricØ
92
Ecc
entri
cØ
26
305
2CO + 202CO + 100
4 x 50
Technical drawing 1 panel side opening door
75 mm sill
- All dimensions in mm.
Notes:
MECHANICALDETAILS
SILLDETAIL
thickness4
thickness3
www.fermator.com7 Robusta PM HD
Technical drawing 2 panel side opening door
120 mm sill
120
120 30
9460120 120CO
15
530
CH
CH
+ 4
20
410
200
CH
+ 2
20
CH
+ 1
0
36
100 CAR
FLOOR
CO
1,5CO + 100
50
+40
-40
CO/2 + 20
1,5CO + 100
CO
120 20
160
Con
cent
ricØ
92
Ecc
entri
cØ
26
120
704055
H30
5
MECHANICALDETAILS
SILLDETAIL
thickness4
thickness3
- All dimensions in mm.
Notes:
Fermator reserves the right to make changes to the specification of the products within this catalogue without prior notice.
Spain: [email protected] • Italy: [email protected] • France: [email protected] • Brazil: [email protected]: [email protected] • India: [email protected] • Poland: [email protected]
Sales contacts