Robotics Tool Training

Robotics Team1128

Tool Training

Power Tools

• Keep power tools in good condition with proper maintenance.

• Power tools should be examined for damage before you use them.

• Never alter or disable any guards or switches.

• Always use the correct P.P.E.

Power tool Danger

Electric Sander

• Always use safety glasses, gloves and a dust mask when using a sander.

• Only use a sander on flat surfaces.

Chop Saw and Grinders

• Always use a face shield and gloves and hearing protection.

• Warn other people in the area before you begin work.

• Always use safety glasses and gloves• Know what is behind the item you are drilling• Grasp the drill firmly by insulated surfaces.• Don’t force a drill. Forcing the drill can cause the

motor to overheat, damage the bit and reduce operator control.

Power Drills

Hand Tools for Cutting Metal

• Always use gloves and safety glasses.• Make sure your metal piece is stable and

secure. • If two people are needed to cut a piece of metal

the helper must also be wearing their PPE.

Chop Saw and Band Saw

• Always use a face shield, safety glasses, gloves and ear plugs.

• Secure your metal piece in a vice.• Warn other in the area that you are about to

begin cutting.

When to use a File

• Use a file after cutting metal.

• Sharp edges and metal slivers can cause major cuts.

• Always use gloves and safety glasses.

Hand Tools

Keep Hand tools organized

• Always use safety glasses and gloves.• Be aware of pinch points.• Use the proper cutter with its designated

material type.

Cutting Tools

Cripmers• Use crimpers for lugs.• Do not use pliers.

Screw Drivers

• Always use safety glasses.

• Never use a screwdriver for prying or as a chisel.

• Use the proper size screwdriver for the screw head.

• Do Not over tighten or you may strip out the screw head or screw.

Different Types of Screwdrivers

Wrenches

• Always use safety glasses and gloves.

• Use the right size wrench on the right size bolt. Improper sizing will result in a stripped bolt head.

• Don’t over tighten bolts.

Soldering

Solder Safety• Always use safety

glasses and gloves.

• Always place a hot soldering iron in its holder.

• Never solder near flammables.

• Report any burns immediately.

A Clean Shop is Safe

• Clean as you go.• Put tools away.• Help everyone clean up at the end of the day.

Wash your hands

• After your done working wash your hands.

• Always go home in as good or better condition than when you arrived.