Robotics Team 1128 Safety Orientation
Robotics Team1128
Safety Orientation
What is our team safety philosophy?
• End your day in the same condition or better condition than you started.
• Know how to be safe through proper training.
• Keep your team mates safe.
• Fooling around, practical jokes, running, or pushing are all safety violations.
• Do not use any tool until you have been trained on the operation of the tool.
• Tools must be used for the purposes in which they are intended. Uses other than the intended purpose are a safety violation.
• A clean workspace is a safe workspace.• Be aware of your surroundings.• Take your time, rushed or impulsive work is
unsafe to you and others.
P.P.E.Personal Protective Equipment
And its proper use
What is P.P.E
• P = Personal • P = Protective• E = Equipment• Your PPE are the extra tools that are
required to ensure your safety. When using the tools you need to fabricate and operate your robot always wear the proper PPE.
Clothing• Protect your body – Don’t wear loose clothing
when operating power tools or when working around moving parts.
Shoes
• Protect your feet & toes - Wear closed toe shoes and socks.
• Working with tools and metal greater than 1 pound require that your feet are protected.
Gloves
• Protect your hands and fingers - Wear gloves.
Safety Glasses
• Protect your eyes – Wear safety glasses when working with any power tool, hand tools or soldering iron.
Face Shield• Protect your face – Wear a face shield
when operating a grinder or chop saw.
Hearing Protection
• Protect your hearing – Use ear plugs when working with a sander, grinder or noisy cutting equipment.
Dust Mask
• Protect your lungs - Always use a dust mask when sanding or using aerosols.
First Aid
• Know the location of a first aid kit and eye wash station or kit.
• Notify a teacher or adult mentor immediately in the event of an accident or injury no matter how minor.
• Plan your task before you get started.• Know the dangers and prepare for them.• Make sure everyone in your group is on
the same page.• Use the Pre-Task Plan
Pre-Task Plan• Who, where, when, how many• Are you ready to work yes or
no• Do you have the proper safety
equipment• Describe what you’re doing• Describe how you could get
hurt• What can you do to prevent an
injury• Everyone involved in the task
sign in if you join the group late review the plan and sign.
• Use the back of the PTP to record your successes or any notes about your robot.
Pre-Task PlanTeam Leader: Location of work:
Task to be accomplished:
Start Date/Time: Crew Size:
Consider the work being performed and check "Yes" or "No"Yes No Yes No
Has every one been trained how to use Have workshop drawings, asbuilts and/orassigned tools and equipment? instructions been reviewed? Is there adequate lighing and room to work Will you be using any chemicals?Are there other groups working close by? Will there be heavy lifting?Is there a potential fire hazard? Does everyone know the location of
Is adequate PPE available for everyone? the eye wash and first aid kit?
Check if any of the following apply (write additional information below if needed)
Describe activity in seqauence Identified Hazards Safety steps taken
Use back of form if you need more space
Crew Sign In:
Reviewed by: Date: