NETWORKS www.shyamnetworks.com RM24/58 P2P and P2MP Radios Quick Start Guide For advanced settings and more detailed information, download the user manual from www.shyamnetworks.com. Package Contents RM24/58 1 Mast/Wall Mounting Kit 1 Outdoor Ethernet Cable (Optional) 1 External Antenna (Optional) 1 PoE Injector 1 Quick Start Guide 1 Shyam Transmission System Management Software CD 1
8
Embed
RM24/58 P2P and P2MP Radios - shyamnetworks.com fileRM24/58 P2P and P2MP Radios Quick Start Guide ... Point to Point Radio - TDMA (Outdoor) Link RM-1C-18M-19-24 2.4 GHz, 18 Mbps with
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
NETWORKS
www.shyamnetworks.com
RM24/58P2P and P2MP Radios
Quick Start Guide
For advanced settings and more detailed information, download the user
RM-1C-18M-19-24 2.4 GHz, 18 Mbps with integrated 19 dBi antenna
RM-1C-18M-E-24 2.4 GHz, 18 Mbps with external antenna
RM-1C-50M-19-24 2.4 GHz, 50 Mbps with integrated 19 dBi antenna
RM-1C-50M-E-24 2.4 GHz, 50 Mbps with external antenna
RM-1C-100M-19-24 2.4 GHz, 100 Mbps with integrated 19 dBi antenna
RM-1C-100M-E-24 2.4 GHz, 100 Mbps with external antenna
RM-1C-18M-23-58 5.8 GHz, 18 Mbps with integrated 23 dBi antenna
RM-1C-18M-E-58 5.8 GHz, 18 Mbps with external antenna
RM-1C-50M-23-58 5.8 GHz, 50 Mbps with integrated 23 dBi antenna
RM-1C-50M-E-58 5.8 GHz, 50 Mbps with external antenna
RM-1C-100M-23-58 5.8 GHz, 100 Mbps with integrated 23 dBi antenna
RM-1C-100M-E-58 5.8 GHz, 100 Mbps with external antenna
LAN Port
RM-1C-18M-19-24
Antenna Port
LAN Port
Power LED
RM-1C-18M-E-24
NETWORKS
3
RM24/58
INTERFACE DESCRIPTION
Antennas Integrated or external antenna depending on the model.
LAN Port One LAN port 10/100/1000 Base-T interface with auto-negotiation.
Interface Description
Caution and Warnings
• Internal settings, adjustment, maintenance, and repairs should be performed only by
a skilled technician who is aware of the hazards involved.
• Do not tightly secure RM24/58 to its mounting brackets until the alignment process
of the antenna is complete.
• Check that there are no direct obstructions or interferences in front of RM24/58
when installing it.
• Do not stand in front of a connected RM24/58 as it requires clear line-of-sight (LOS).
• Make sure that both master and slave RM24/58 are assigned different IP addresses
before they are installed.
MODEL DESCRIPTION
Point to Multi Point Base Station and Subscribers - TDMA (Outdoor)
RPMP-1C-18M-E-24 2.4 GHz, 18 Mbps
RPMP-1C-18M-E-58 5.8 GHz, 18 Mbps
RPMP-1C-50M-E-24 2.4 GHz, 50 Mbps
RPMP-1C-50M-E-58 5.8 GHz, 50 Mbps
RPMP-1C-100M-E-24 2.4 GHz, 100 Mbps
RPMP-1C-100M-E-58 5.8 GHz, 100 Mbps
NETWORKS
4
RM24/58
2. Installing RM24/58
Additional Hardware
• RJ-45 crimp tool (if pre-assembled cable is not used)• Grounding cable• 13 mm or ½½ socket spanner• Ethernet cable - outdoor class, CAT-5e, and 4 twisted pairs• Cable ties• Computer/laptop running Windows XP/Windows 7
Installation Sequence
Mount RM24/58
STEP 1 Assemble RM24/58 unit onto the mast.STEP 2 Connect the ground cable to the chassis point on RM24/58.STEP 3 Attach cable from RM24/58 to the RJ-45 connector.STEP 4 Secure the cables to the mast or brackets using UV-rated cable ties.STEP 5 Repeat the procedure to mount the other RM24/58 at the slave site.
Mount RM24/58
Ground RM24/58
Align Master and Slave RM24/58
Connect RM24/58 to PoE Injector
Supply Power to
PoE Injector
PoE Adapter4-Port Switch
Integrated Antenna
NETWORKS
5
RM24/58
Ground RM24/58STEP 1 Crimp the grounding lug at both the ends on the earthing cable.STEP 2 Connect and tighten one end of the earthing cable to RM24/58.STEP 3 Connect other end of the earthing cable to the earth pit on the ground.iNote: Ensure that ground earthing is separated from power earthing.
Connect RM24/58 to PoE InjectorSTEP 1 Route the cable from RM24/58 into the building where PoE injector is placed.STEP 2 Secure the cable along its path.STEP 3 Connect the cable from RM24/58 to the appropriate RJ-45 connector on the PoE injector.
Supply Power to PoE InjectorSTEP 1 Connect the PoE adapter to the main electrical supply and the power cord plugged into the socket of the adapter.STEP 2 Turn on the power supply. RM24/58 starts receiving power through the PoE adapter.
Align Master and Slave RM24/58STEP 1 Turn on the power supply of the PoE injector at both the sites.STEP 2 Align master RM24/58 in the direction of slave RM24/58.STEP 3 Turn slave RM24/58 towards master site, listening to the beep sequence until optimal alignment is achieved.iNote: Frequent beeps indicate better signal strength. Higher signal strength has lower pause time in between the beeps. Frequencyofbeepconfirmsthelinkquality.Thesignalstrengthimproveswith the increase in the beep frequency. After approximately 40 seconds, the slave RM24/58 beeper starts beeping which indicates a normal operation.
STEP 4 Tightly secure slave RM24/58 onto the mast/wall. STEP 5 Repeat the same procedure at the master site.
Congratulations! The installation of RM24/58 is complete.
Beeper Sequence = On = Off
Description
Indicates a good signal
Indicates a weak signal
No air link
NETWORKS
6
RM24/58
3. Configuring RM24/58
STEP 1 Install the Shyam Transmission System Management software on the system,
which on successful installation creates the Shyam Transmission System icon on
the desktop.
STEP 2 Connect the system to the LAN.
STEP 3 Double-click the Shyam Transmission System icon on the desktop or click
Start | Programs | Shyam Transmission System.
STEP 4 Enter username and password as admin.
STEP 5 Connect RM24/58 either by specifying the IP addresses or enabling the
auto-discovery option.
On successful connection, the Shyam Transmission System window appears.
Please refer to “RM-24/58 Installation and Configuration Guide” for more details.
NETWORKS
7
RM24/58
4. Quick Troubleshooting
PROBLEM PROBABLE REASON RESOLUTION
No beep sound. There is no signal. •Ensure that cable at RM24/58 is properly connected.
•Check the connectivity between the external antenna and RM24/58.
•Check master and slave RM24/58 alignment.
•After setting to factory defaults, check that both master and slave sites have same SSID and pass-phrase for the radio link to work.
Beep sound has long pauses in between.
The signal is weak. •Check master and slave RM24/58 alignment.
•Check that the alignment beeps give the best signal beeper sequence.
NETWORKS
8
RM24/58
109.00021.00
SN/QS/RM24,58/06/11/R2.1
Warranty
This warranty is valid upto 12 months from the date of purchase.
Any manufacturing defect will be repaired by the company free of charge within the period of