Fuse protection RM CC Modular fuse holders for industrial class CC fuses Function RM CC are modular DIN rail mounted fuse holders for UL Class CC fuses. They are available with and without LED indication in 1, 2 and 3-pole versions. RM CC fuse holders are IP20 protected from touch by fingers and provide safe breaking and isolation of electrical circuits up to 600 V / 30 A. Advantages Improved safety • Omnipolar and simultaneous disconnection. • High dielectric strength. Protection IP2X. High breaking capacity Protection against overloads and short- circuits thanks to high breaking capacity fuses (200 kA rms). Specific format and accessories • Modular 45 mm cut-out design. • Padlocking accessory available. Label holder • RM CC are equipped with a label holder for an easy circuit identification. RM CC with LED 30 A RM CC 30 A > Distribution boards > Motor and Control circuits > Transformers protection > Measuring devices and multi- function meter protection The solution for > Improved safety > High breaking capacity > Specific format and accessories > Label holder Strong points > UL 4248-4 Compliance with standards rm-ul_001_b.eps rm-ul_002_b.eps new 328 General Catalogue 2017-2018
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Fuse
pro
tect
ion
RM CCModular fuse holdersfor industrial class CC fuses
Function
RM CC are modular DIN rail mounted fuse holders for UL Class CC fuses. They are available with and without LED indication in 1, 2 and 3-pole versions. RM CC fuse holders are IP20 protected from touch by fingers and provide safe breaking and isolation of electrical circuits up to 600 V / 30 A.
Advantages
Improved safety • Omnipolar and simultaneous disconnection. • High dielectric strength. Protection IP2X.
High breaking capacityProtection against overloads and short-circuits thanks to high breaking capacity fuses (200 kA rms).
Specific format and accessories • Modular 45 mm cut-out design. • Padlocking accessory available.
Label holder • RM CC are equipped with a label holder for an easy circuit identification.
RM CC with LED30 A
RM CC30 A
> Distribution boards > Motor and Control circuits > Transformers protection > Measuring devices and multi-function meter protection
The solution for
> Improved safety > High breaking capacity > Specific format and accessories
> Label holder
Strong points
RM CC
> UL 4248-4
Compliance with standards
rm-u
l_00
1_b.
eps
rm-u
l_00
2_b.
eps
new
RM CC Modular fuse holders
for industrial class CC fuses
Basic deviceFuse size
30 AClass CC
30 A with LEDClass CC
No. of polesTo be orderedin multiples of Reference
To be orderedin multiples of Reference
1 P 12 5705 0001 12 5705 00112 P 6 5705 0002 6 5705 00123 P 4 5705 0003 4 5705 0013
RM CC
References
Accessories*Key handle interlocking system
rm_0
58_a
_1
UsePadlocking of the handle (padlock not supplied).
Rating (A) Quantity (units) Reference
30 5 5701 9040
rm_0
30_a
_1_x
_cat
Rating (A) Quantity (units) Reference
30 12 5704 0003(1)
(1) One coupling to attach two RM/CC.Also sold in bags containing separate components (bags of 100 pieces) for assembling larger quantities. Please contact us.
Coupling system
CLIC !
Reinforced insulation kit
Rating (A) Reference
30 5701 9010(1)
(1) 1 reference = 1 set of 10 insulation kits
* Non UL.
acce
ss_3
61_a
328 General Catalogue 2017-2018
Fuse
pro
tect
ion
RM CCModular fuse holdersfor industrial class CC fuses
Function
RM CC are modular DIN rail mounted fuse holders for UL Class CC fuses. They are available with and without LED indication in 1, 2 and 3-pole versions. RM CC fuse holders are IP20 protected from touch by fingers and provide safe breaking and isolation of electrical circuits up to 600 V / 30 A.
Advantages
Improved safety • Omnipolar and simultaneous disconnection. • High dielectric strength. Protection IP2X.
High breaking capacityProtection against overloads and short-circuits thanks to high breaking capacity fuses (200 kA rms).
Specific format and accessories • Modular 45 mm cut-out design. • Padlocking accessory available.
Label holder • RM CC are equipped with a label holder for an easy circuit identification.
RM CC with LED30 A
RM CC30 A
> Distribution boards > Motor and Control circuits > Transformers protection > Measuring devices and multi-function meter protection
The solution for
> Improved safety > High breaking capacity > Specific format and accessories
> Label holder
Strong points
RM CC
> UL 4248-4
Compliance with standards
rm-u
l_00
1_b.
eps
rm-u
l_00
2_b.
eps
new
RM CC Modular fuse holders
for industrial class CC fuses
Basic deviceFuse size
30 AClass CC
30 A with LEDClass CC
No. of polesTo be orderedin multiples of Reference
To be orderedin multiples of Reference
1 P 12 5705 0001 12 5705 00112 P 6 5705 0002 6 5705 00123 P 4 5705 0003 4 5705 0013
RM CC
References
Accessories*Key handle interlocking system
rm_0
58_a
_1
UsePadlocking of the handle (padlock not supplied).
Rating (A) Quantity (units) Reference
30 5 5701 9040
rm_0
30_a
_1_x
_cat
Rating (A) Quantity (units) Reference
30 12 5704 0003(1)
(1) One coupling to attach two RM/CC.Also sold in bags containing separate components (bags of 100 pieces) for assembling larger quantities. Please contact us.
Coupling system
CLIC !
Reinforced insulation kit
Rating (A) Reference
30 5701 9010(1)
(1) 1 reference = 1 set of 10 insulation kits
* Non UL.
acce
ss_3
61_a
329General Catalogue 2017-2018
RM CC Modular fuse holdersfor industrial class CC fuses
Rated operational current (A) 30 AFuse size class CCRated operating voltage (V) 600Dielectric strength (V) 2200LED working voltage(1) 120 … 600 VACRated power dissipation (W/P) 3Protection degree IP20
Class CC fuse protected short-circuit withstandProspective short-circuit current (kA rms.) 200
Design current derating coefficient for N poles side by sideN = 1 … 3 1N = 4 … 6 0.8N = 7 … 9 0.7N ≥ 10 0.6
ConnectionWire type (solid / stranded Cu) 60 / 75°C
1 wireMinimum Cu cable cross-section solid / stranded 0.75 mm2 / 18 AWGMaximum Cu cable cross-section solid / stranded 16 mm2 / 8 AWG
2 wiresMinimum Cu cable cross-section solid / stranded 0.75 mm² / 18 AWGMaximum Cu cable cross-section solid 10 mm² / 8 AWGMaximum Cu cable cross-section stranded 6 mm² / 10 AWG
Wire strip (mm / in) 10 / 0.39Maximum tightening torque 2.5 Nm / 22 lb.in
Fixing DIN rail 35 mm DIN 46277/1-3 (EN50022)
Mechanical characteristicsWeight of 1 P (kg / lb) 0.057 / 0.126Weight of 2 P (kg / lb) 0.114 / 0.251Weight of 3 P (kg / lb) 0.170 / 0.375
(1) For fuse holders with LED indicator.
CharacteristicsCharacteristics according to UL 4248-4
RM CC Modular fuse holders
for industrial class CC fuses
30 A
Dimensions (in / mm)
2.28581.5740
1.77 45
0.79 20
1.5740
0.246
2.9574.8
2.0552.5
1.3835
0.6917.5
3.07 78
rm_0
67_a
_1_u
s_ca
t
330 General Catalogue 2017-2018
RM CC Modular fuse holdersfor industrial class CC fuses
Rated operational current (A) 30 AFuse size class CCRated operating voltage (V) 600Dielectric strength (V) 2200LED working voltage(1) 120 … 600 VACRated power dissipation (W/P) 3Protection degree IP20
Class CC fuse protected short-circuit withstandProspective short-circuit current (kA rms.) 200
Design current derating coefficient for N poles side by sideN = 1 … 3 1N = 4 … 6 0.8N = 7 … 9 0.7N ≥ 10 0.6
ConnectionWire type (solid / stranded Cu) 60 / 75°C
1 wireMinimum Cu cable cross-section solid / stranded 0.75 mm2 / 18 AWGMaximum Cu cable cross-section solid / stranded 16 mm2 / 8 AWG
2 wiresMinimum Cu cable cross-section solid / stranded 0.75 mm² / 18 AWGMaximum Cu cable cross-section solid 10 mm² / 8 AWGMaximum Cu cable cross-section stranded 6 mm² / 10 AWG
Wire strip (mm / in) 10 / 0.39Maximum tightening torque 2.5 Nm / 22 lb.in
Fixing DIN rail 35 mm DIN 46277/1-3 (EN50022)
Mechanical characteristicsWeight of 1 P (kg / lb) 0.057 / 0.126Weight of 2 P (kg / lb) 0.114 / 0.251Weight of 3 P (kg / lb) 0.170 / 0.375
(1) For fuse holders with LED indicator.
CharacteristicsCharacteristics according to UL 4248-4
RM CC Modular fuse holders
for industrial class CC fuses
30 A
Dimensions (in / mm)
2.28581.5740
1.77 45
0.79 20
1.5740
0.246
2.9574.8
2.0552.5
1.3835
0.6917.5
3.07 78
rm_0
67_a
_1_u
s_ca
t
331General Catalogue 2017-2018
Related Documents
