9 Special Price RM 1,199.00 Special Price RM 1,595.00 Special Price RM 154.00 Special Price RM 703.70 Special Price RM 1,540.00 Special Price RM 3,080.00 160AMP ARC WELDER WITH ACCESSORY KIT • Manufactured in Europe to exacting standards, this model meets all relevant CE standards. • Fitted with forced air cooling system this welder has increased duty cycle and performance. • Features a single, vented, wrap around shell fitted to a heavy-duty chassis. • Screw type, stepless welding control allows fine adjustment of current. • Fitted with carry handle with extension bar and set of wheels for added mobility. • Supplied with complete accessory kit including electrode holder, cables, earth clamp, chipping hammer/wire brush and welding mask. • Model No. 160XTC 200AMP ARC WELDER WITH ACCESSORY KIT • Manufactured in Europe, this model meets all relevant CE standards. • Fitted with forced air cooling system for increased duty cycle and performance. • Features a single, vented, wrap around shell fitted to a heavy-duty chassis. • Screw type, stepless welding control allows fine adjustment of current. • Fitted with carry handle with extension bar and set of wheels for added mobility. • Supplied with complete accessory kit including electrode holder, cables, earth clamp, chipping hammer/wire brush and welding mask. • Model No. 200XTC CLEARVISION ® SOLAR POWERED AUTOMATIC WELDING HELMET SHADE 9-13 • High quality variable shade 9-13 lens manufactured and tested to BSEN379. • Fully automatic, switches from light to dark on striking arc. • Fitted with solar power panel - no batteries required. • Features sensitivity switch and delay speed switch control for switching dark to light, preventing arc eye when welding at high power, whilst still providing fast switching for tack welding. • Deluxe contoured helmet design approved to BSEN175 gives full neck protection and protects lens from scratching when helmet is laid down. • Comfortable headband and non-slip quick-release ratchet mechanism. • Suitable for MIG, TIG and arc welding. • Model No. PWH599 8PC SOLDERING GUN/IRON KIT 230V • Comprehensive kit containing 100Watt soldering gun, 30Watt soldering iron, iron holder, excess solder extractor, scraper, spare tips, solder wire and universal workpiece clamps. • Fitted with BS approved plugs. • Model No. SD300K OXYACETYLENE GAS WELDING/CUTTING SET • Complete set of regulators and torches for oxyacetylene gas welding. • Single stage gas regulators with 2 gauges to show bottle pressure and working pressure. • 4.5mtr Twin gas hose set with check valves (to torch) and EN730-compliant pressure activated flash arrestors (to regulators). • Welding torch with 3 lightweight nozzles. • Cutting torch attachment with 3 ANMS cutting nozzles. • Spark lighter. • Supplied in carry-case. • Model No. SGA1 140AMP INVERTER 230V • Inverter power supply suitable for arc or TIG welding applications using scratch-start method. • Features Arc-Force circuitry making the unit suitable for welding a wide variety of rods. • Also includes thermal cut-out and mains voltage LEDs. • Fitted with Hot-Start system to counter electrode sticking during scratch starting. • Arc and TIG welding accessory kits not included. • Model No. MW140
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
9
SpecialPrice RM 1,199.00 Special
Price RM 1,595.00
SpecialPrice RM 154.00 Special
Price RM 703.70
SpecialPrice RM 1,540.00 Special
Price RM 3,080.00
160AMP ARC WELDER WITH ACCESSORY KIT• Manufactured in Europe to
exacting standards, this model
meets all relevant CE standards.
• Fitted with forced air cooling
system this welder has increased
duty cycle and performance.
• Features a single, vented, wrap
around shell fitted to a
heavy-duty chassis.
• Screw type, stepless welding
control allows fine
adjustment of current.
• Fitted with carry handle with
extension bar and set of
wheels for added mobility.
• Supplied with complete accessory
kit including electrode holder,
cables, earth clamp, chipping
hammer/wire brush and welding
mask.
• Model No.
160XTC
200AMP ARC WELDER WITH ACCESSORY KIT• Manufactured in Europe, this model
meets all relevant CE standards.
• Fitted with forced air cooling
system for increased duty
cycle and performance.
• Features a single, vented, wrap
around shell fitted to a
heavy-duty chassis.
• Screw type, stepless welding
control allows fine
adjustment of current.
• Fitted with carry handle with
extension bar and set of
wheels for added mobility.
• Supplied with complete accessory
kit including electrode holder,
cables, earth clamp, chipping
hammer/wire
brush and
welding
mask.
• Model No.
200XTC
CLEARVISION® SOLAR POWERED AUTOMATIC WELDING HELMET SHADE 9-13• High quality variable shade 9-13 lens
manufactured and tested to BSEN379.
• Fully automatic, switches from
light to dark on striking arc.
• Fitted with solar power
panel - no batteries required.
• Features sensitivity switch and delay
speed switch control for switching dark
to light, preventing arc eye when
welding at high power, whilst still
providing fast switching
for tack welding.
• Deluxe contoured helmet design
approved to BSEN175 gives full
neck protection and protects lens from
scratching when helmet is laid down.
• Comfortable headband and non-slip
quick-release ratchet mechanism.
• Suitable for MIG, TIG and arc welding.
• Model No. PWH599
8PC SOLDERING GUN/IRON KIT 230V
• Comprehensive kit containing
100Watt soldering gun,
30Watt soldering iron, iron holder,
excess solder extractor, scraper,
spare tips, solder wire and universal workpiece clamps.
• Fitted with BS approved plugs.
• Model No. SD300K
OXYACETYLENE GAS WELDING/CUTTING SET
• Complete set of regulators
and torches for
oxyacetylene gas welding.
• Single stage gas regulators
with 2 gauges to show bottle
pressure and working pressure.
• 4.5mtr Twin gas hose set with
check valves (to torch) and
EN730-compliant pressure
activated flash arrestors (to regulators).
• Welding torch with 3 lightweight nozzles.
• Cutting torch attachment with
3 ANMS cutting nozzles.
• Spark lighter.
• Supplied in carry-case.
• Model No. SGA1
140AMP INVERTER 230V
• Inverter power supply suitable for arc
or TIG welding applications using
scratch-start method.
• Features Arc-Force circuitry
making the unit suitable
for welding a wide
variety of rods.
• Also includes thermal
cut-out and mains
voltage LEDs.
• Fitted with Hot-Start
system to counter
electrode sticking
during scratch starting.
• Arc and TIG welding
accessory kits not
included.
• Model No. MW140
10
SpecialPrice RM 3,080.00
SpecialPrice RM 1,759.20
SpecialPrice RM 2,228.30
6 DRAWER TOPCHEST WITH BALL BEARING RUNNERS
• Heavy gauge steel with double wall
construction for extra strength and durability.
• Ball bearing drawer runners provide superior
performance and carry heavier loads.
• Each drawer fitted with catch to prevent unexpected opening,
when being transported around the workshop.
• Added security provided by side
mounted cylinder locks, supplied with two keys.
• Recessed handles permit units to be slotted
into work environments where space is tight.
• Rust and solvent resistant powder coat paint finish.
• Fitted with anti-shock protection on
all four corners to prevent accidental damage.
• Tough composite top.
• Overall Size (W x D x H): 690 x 465 x 535mm.
• Model No. AP2403
4 DRAWER ROLLCAB WITH BALL BEARING RUNNERS
• Heavy gauge steel with double wall construction for extra strength and durability
• Ball bearing drawer runners provide superior
performance and carry heavier loads.
• Each drawer fitted with catch to prevent unexpected opening
when being transported around the workshop.
• Added security provided by side mounted cylinder lock, supplied with two keys.
• Also features a lockable cupboard.
• Rubber grip side handles for comfort and ease when manoeuvring.
• Rust and solvent resistant powder coat paint finish.
• Fitted with anti-shock protection on all four corners to prevent accidental damage.
• Rollcabs feature two Ø125mm swivel castors with large
toe locks and two fixed wheels.
• Tough composite top for fitting and securing topchest
or can be used as a workstation.
• Unique design fitted with perforated side
panels for hanging tools and accessories.
• Model No. AP2405
4 DRAWER TOPCHEST WITH 142PCMODULAR TOOL KIT
• Topchest Model No.
AP2401
• Overall Dimensions
(W x D x H):
690 x 465 x 400mm
• 4 x Medium Drawers
Package Model No.
AP2401TTC08
11
SpecialPrice RM 12,800.00
SpecialPrice RM 2,345.60
SpecialPrice RM 3,166.50
14 DRAWER TOOLCHEST COMBINATION WITH 1231PC TOOL KIT
6 DRAWER ROLLCAB WITH BALLBEARING RUNNERS
• Heavy gauge steel with double wall construction for extra strength and durability
• Ball bearing drawer runners provide superior performance and carry heavier loads.
• Each drawer fitted with catch to prevent unexpected
opening when being transported around the workshop.
• Added security provided by side mounted cylinder lock, supplied with two keys.
• Rubber grip side handles for comfort and ease when manoeuvring.
• Rust and solvent resistant powder coat paint finish.
• Fitted with anti-shock protection on all four corners to prevent accidental damage.
• Rollcabs feature two Ø125mm swivel castors with large toe locks and two fixed wheels.
• Tough composite top for fitting and securing topchest or can be used as a workstation.
• Unique design fitted with perforated side panels for hanging tools and accessories.
• Overall Size (W x D x H): 766 x 465 x 958mm.
• Model No. AP2406
10 DRAWER ROLLCAB WITH BALL BEARING RUNNERS
• Heavy gauge steel with double wall construction for extra strength and durability
• Ball bearing drawer runners provide superior performance and carry heavier loads.
• Each drawer fitted with catch to prevent unexpected opening
when being transported around the workshop.
• Added security provided by side mounted cylinder lock, supplied with two keys.
• Rubber grip side handles for comfort and ease when manoeuvring.
• Rust and solvent resistant powder coat paint finish.
• Fitted with anti-shock protection on all four corners to prevent accidental damage.
• Rollcabs feature two Ø125mm swivel castors with large toe locks and two fixed wheels.
• Tough composite top for fitting and securing topchest or can be used as a workstation.
• Unique design fitted with perforated side panels for hanging tools and accessories.
• Overall Size (W x D x H): 766 x 465 x 958mm.
• Model No. AP2410
• Topchest Model No. AP2403
• Overall Dimensions
(W x D x H): 690 x 465 x 535mm
• 6 x Medium Drawers
• Rollcab Model No. AP2408
• Overall Dimensions
(W x D x H): 766 x 465 x 958mm
• 6 x Medium Drawers
• 2 x Large Drawers
• Package Model No. APTTC02
X2
Blank
Tray
12
SpecialPrice RM 197.00
SpecialPrice RM 182.80 Special
Price RM 177.70 SpecialPrice RM 430.00
SpecialPrice RM 533.70 Special
Price RM 1,980.00 SpecialPrice RM 44.00
SpecialPrice RM 152.50Special
Price RM 203.50SpecialPrice RM 165.00
WORKSHOP AIR FILTER/REGULATOR/LUBRICATOR
• Suitable for most workshop
air supply set-ups.
• Die-cast control
heads with clear
polycarbonate bowls.
• Regulator assembly
features locking control
knob for pre-setting air
pressure and large,
easy-to-read pressure gauge.
• Lubricator includes oil/air
mix control and sight glass.
• Model No. SA2001
PROFESSIONAL GOLD SERIES SUCTION FEED SPRAYGUN 1.8MM SET-UP• High quality, professional spray gun
ideal for automotive refinishing.
• Suitable for a wide
range of materials.
• Standard set-up 1.8mm.
• 1.5mm and 2.0mm
set-ups available.
• Supplied with cam
action suction pot.
• Nozzle and needle
in stainless
steel to allow use
with water based paints.
• Model No. S701
PROFESSIONAL GOLDSERIES GRAVITY FEEDSPRAY GUN 1.4MMSET-UP