Systems | RKP‑ISC‑2220 Intelligent System Controller The RKP‑ISC‑2220 Intelligent System Controller with an integrated dual reader interface serves as the primary access control engine for ReadykeyPRO input/output interfaces. It supports connections to multiple combinations of ReadykeyPRO Input Control Modules, Output Control Modules, and Card Reader Interface Modules. The RKP‑ISC‑2220 provides power, performance, and flexibility for the most demanding applications. Note The RKP-ISC-2220 requires ReadykeyPRO 6.1.222 software or newer. System Overview The RKP‑ISC‑2220 Intelligent System Controller provides a single-board solution for interfacing one or two doors to a ReadykeyPRO system. In addition, other I/O and reader interface modules can be added on the RKP‑ISC‑2220’s downstream port to expand its capabilities. The RKP‑ISC‑2220 is scalable for any access control application, from the most basic to the most sophisticated. In the event of communication loss, the RKP‑ISC‑2220 allows nearly all local functionality to continue unimpaired until the server connection is restored. 1 2 4 3 5 6 7 1. ReadykeyPRO Security Server 2. Corporate Network (TCP/IP) 3. RKP‑ISC‑2220 Intelligent System Controller 4. RS‑485 Bus (multidrop) 5. RKP‑SRI Single Reader Interface Module 6. RKP‑INPUT‑16 Input Control Module 7. RKP‑OUTPUT‑16 Output Control Module RKP‑ISC‑2220 Intelligent System Controller ▶ On-board Ethernet 10/100Base-T port provides up to 8 times greater throughput than serial-to-Ethernet converters; DHCP and fixed IP addressing supported ▶ DNS device naming through DHCP extended commands ▶ 6 MB of available on-board, non-volatile flash memory ▶ Biometric template storage support for Schlage Recognition Systems, Bioscrypt, and Identix ▶ Up to 32,000 access level permissions ▶ 255 holidays with grouping; 255 time zones, each with 6 intervals ▶ Elevator control support for up to 128 floors ▶ Up to 9-digit user PIN codes ▶ 20 status LEDs ▶ Advanced Encryption Standard (AES) 128-bit algorithm for communications www.boschsecurity.com
4
Embed
RKP‑ISC‑2220 Intelligent System Controllerstna.resource.bosch.com/documents/Data_sheet_enUS_2677578891.pdf · RKP‑ISC‑2220 Intelligent System Controller | 3 Ordering Information
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Systems | RKP‑ISC‑2220 Intelligent System Controller
The RKP‑ISC‑2220 Intelligent System Controller with anintegrated dual reader interface serves as the primaryaccess control engine for ReadykeyPRO input/outputinterfaces. It supports connections to multiplecombinations of ReadykeyPRO Input Control Modules,Output Control Modules, and Card Reader InterfaceModules. The RKP‑ISC‑2220 provides power, performance,and flexibility for the most demanding applications.
Note The RKP-ISC-2220 requires ReadykeyPRO6.1.222 software or newer.
System Overview
The RKP‑ISC‑2220 Intelligent System Controller provides asingle-board solution for interfacing one or two doors to aReadykeyPRO system. In addition, other I/O and readerinterface modules can be added on the RKP‑ISC‑2220’sdownstream port to expand its capabilities. TheRKP‑ISC‑2220 is scalable for any access control application,from the most basic to the most sophisticated. In the eventof communication loss, the RKP‑ISC‑2220 allows nearly alllocal functionality to continue unimpaired until the serverconnection is restored.
1
2
4
3
5 6 7
1. ReadykeyPRO Security Server2. Corporate Network (TCP/IP)3. RKP‑ISC‑2220 Intelligent System Controller4. RS‑485 Bus (multidrop)5. RKP‑SRI Single Reader Interface Module6. RKP‑INPUT‑16 Input Control Module7. RKP‑OUTPUT‑16 Output Control Module
RKP‑ISC‑2220 Intelligent SystemController
▶ On-board Ethernet 10/100Base-T port provides up to 8times greater throughput than serial-to-Ethernetconverters; DHCP and fixed IP addressing supported
▶ DNS device naming through DHCP extendedcommands
▶ 6 MB of available on-board, non-volatile flash memory
▶ Biometric template storage support for SchlageRecognition Systems, Bioscrypt, and Identix
▶ Up to 32,000 access level permissions
▶ 255 holidays with grouping; 255 time zones, each with6 intervals
▶ Elevator control support for up to 128 floors
▶ Up to 9-digit user PIN codes
▶ 20 status LEDs
▶ Advanced Encryption Standard (AES) 128-bit algorithmfor communications
www.boschsecurity.com
2 | RKP‑ISC‑2220 Intelligent System Controller
Functions
Integrated Dual Reader Interface• Supports Data1/Data0, Clock/Data, and Open
Supervised Device Protocol(OSDP) compatible RS‑485readers and keypads
• Four Form‑C relay outputs, 5 A at 30 VDC• Door contact supervision (open/closed) and Request-
to-Exit (REX) push-button monitor for each door• Eight Inputs individually programmable for normally
open/closed, supervised or unsupervised circuits.• Strike control and auxiliary output for each door• Bicolor reader status LED support plus beeper control,
or two-wire LED support
CommunicationsUtilizing its native Ethernet communications and anadvanced 32-bit processor, the RKP‑ISC‑2220 cancommunicate upstream to the host computer through itsEthernet port, or alternately at up to 115.2 Kbps usingRS‑232 communication directly or through an external dial-up modem. The RKP‑ISC‑2220 supports one downstreamRS‑485 two-wire port, which can be used to connect up to32 devices (maximum 64 doors).
Input/OutputTwo on-board reader ports support Data1/Data0, Clock/Data, Bioscrypt RS‑485 readers, and the bidirectionalRS‑485 OSDP communications. Each RKP‑ISC‑2220supports up to eight different card formats. TheRKP‑ISC‑2220 includes eight inputs that support normallyopen, normally closed, supervised, and unsupervisedcircuits. In addition, four output relays support fail-safe orfail-secure operation.
Certifications and Approvals
UL Standard UL294, Access Control Systems UnitsUL1076, Proprietary Alarm Units
Installation/Configuration Notes
Compatibility Information
Modules RKP-INPUT-16 Input Control ModuleRKP-OUTPUT-16 Output Control ModuleRKP-SRI Single Reader Interface ModuleRKP-DRI Dual Interface Module
Multiplexers RKP-MUX-8 Star Multiplexer
Technical Specifications
Board Design
Dimensions: 6 in. x 8 in. x 1 in.(15 cm x 20 cm x 2.5 cm)
Weight: 9 oz (0.26 kg)
Indicators: 20 status LEDs
RAM/Memory: 6 MB
Environmental Considerations
ROHS Compliant
Relative Humidity: 0% to 95%, non‑condensing
Temperature (Operating): +32°F to +158°F (0°C to +70°C)
Temperature (Storage): -67°F to +185°F (-55°C to +85°C)
Power Requirements
Backup Battery: 3 V Lithium, type BR2325, BR2330, orCR2330
Input (DC): 12 or 24 VDC ± 15%, 500 mA
Communications
Primary Port: 10/100Base‑T Ethernet
Upstream Port (alternate): RS‑232 9600 to 115.2 kbps async
Downstream Port: RS‑485 (two-wire) 9600 to 38.4 kbps async
Connections
Inputs: Twisted pair, 30 Ω maximum
Outputs: As required for load
Power: Twisted pair, 18 AWG (1.2 mm)
RS‑485: 24 AWG (0.6 mm) minimum twisted pair(s)with shield, 4000 ft (1219 m) maximum
RS‑232: 24 AWG (0.6 mm) minimum twisted pair(s)with shield, 25 ft (7.6 m) maximum
Alarm Inputs
Door Position, REX, and AUX: Eight, each programmable as normally openor normally closed, supervised or unsuper-vised circuits
Tamper and Power FailureMonitor:
One unsupervised, dedicated
Alarm Outputs
Relay Outputs: Four, Form C 5 A at 30 VDC relay outputs:two strike, 2 auxiliary
Capacity
Cardholders: Up to 250,000 (supports selective down-loads for larger cardholder databases)
Events: Up to 50,000
Readers: 64 readers (32 downstream devices)
RKP‑ISC‑2220 Intelligent System Controller | 3
Ordering Information
RKP‑ISC‑2220 Intelligent SystemControllerPrimary access control engine for Readykey-PRO input and output (I/O) interfaces.
RKP-ISC-2220
Accessories
RKP-336KMODEM External Modem(33.6K)Provides the data speed and transmission out-put required for the ReadykeyPRO Unlimitedsystem. 12 VDC powered 33.6K external mo-dem. Includes communications cable.
RKP-336KMODEM
www.boschsecurity.com
4 | RKP‑ISC‑2220 Intelligent System Controller
Americas:Bosch Security Systems, Inc.130 Perinton ParkwayFairport, New York, 14450, USAPhone: +1 800 289 0096Fax: +1 585 223 [email protected]