Use DHCP server FD1103M1-EI 3 MP Intelligent IP outdoor fixed dome camera with IR Quick Start Guide © Siqura B.V. 2017 Version 1.1 (160707-1.1) FD1103m1ei QSG (MW10) Point the lens Unpack Connect Use fixed IP address Insert Micro SD card / Reset Note: Subject to modification. Actual product and accessories may differ in appearance. *Reset button: Press and hold for 10 sec. when powering on or rebooting. Warning: Restores factory default settings, including IP address, user name and password! Note: Use Device Manager (see next) to discover the camera on the network. Note: For mounting instructions for pole mount or wall mount, see respective manuals. 1. Pan 2. Tilt 3. Rotate RJ-45, 802.3af PoE Use side conduit (optional) 1 2 3 Lock screw 12 Vdc / 24 Vac DHCP Network switch IP = 10.x.y.z IP = 10.x.y.z DHCP: IP = 10.x.y.z DHCP Network switch IP = 192.168.1.x IP = 192.168.1.x DHCP: 30 s 2 ~ 253 Reset button* Serial port (debugging only) Micro SD/SDHC/SDXC (up to 128 GB) Find additional manuals, the datasheet, the EU Declaration of Conformity and the latest firmware for this product at: http://www.tkhsecurity.com/support-files http://www.tkhsecurity.com http://www.tkhsecurity-usa.com