D T G RipPro Por t Configuratio n The Rip software uses two printer entities and the Epson driver to print y our jobs. The process is display ed in Figure 1 . In order for it to work properly, Windows must see the Epson printer and the Powerrip Output Queue on the same port. This document shows how to align por ts on Windows XP and Windows 7. Vista is the same as XP. Figure 1 Step 1: Open Printers and Faxes (XP), Printers (Vista), or Devices and Printers (7). If the link is not in the Start Menu, it will be located in Control Panel. See Figures 2A(XP), 2B(7). Figure 2A Figure 2B Step 2: Open the Rip Software. Click the Inputs button. See Figure 3. Locate your DTG printer in the Hot Folders sec tion. Y ou should only have your printer listed, and the name may be slightly different. In this case, the HM1 is listed as the KIOSK-MH. Then look at the Intended Output Section. Under Output Queue, take note of the number of the listed Powerrip Output Queue. In this case it is Powerrip Output Queue 1. Figure 3 Step 3: Locate the Epson driver in the Printers screen. Right-click it, and choose Properties (XP , Vista, Figure 4A), or Printer Properties (7, Figure 4B). NOTE: Window s 7 combines printers that are on the same port. I n Figure 4B, the Frontier Zx is another printer on the same port. Always look for the arrows that give you sub-menus, and make sure that you are selecting the correct pr inter. Figure 4A Figure 4B
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
DTG RipPro Port Conguration The Rip software uses two printer entities and the Epson driver to print your jobs. The process is displayed in Figure 1. In order for it to work
properly, Windows must see the Epson printer and the Powerrip Output Queue on the same port. This document shows how to align ports on
Windows XP and Windows 7. Vista is the same as XP.
Figure 1
Step 1: Open Printers and Faxes (XP), Printers (Vista), or Devices and
Printers (7). If the link is not in the Start Menu, it will be located in Control
Panel. See Figures 2A(XP), 2B(7).
Figure 2A
Figure 2B
Step 2: Open the Rip Software. Click the
Inputs button. See Figure 3. Locate your
DTG printer in the Hot Folders section. You
should only have your printer listed, and
the name may be slightly dierent. In this
case, the HM1 is listed as the KIOSK-MH.
Then look at the Intended Output Section.
Under Output Queue, take note of thenumber of the listed Powerrip Output
Queue. In this case it is Powerrip Output
Queue 1. Figure 3
Step 3: Locate the Epson driver in the
Printers screen. Right-click it, and choose
Properties (XP, Vista, Figure 4A), or Printer
Properties (7, Figure 4B).
NOTE: Windows 7 combines printers that
are on the same port. In Figure 4B, theFrontier Zx is another printer on the same