ELECTRONICS • 250mm ARF FPV Racer • White Gel Coat carbon fiber frame • Clear polycarbonate, nearly indestructible risers in place of traditional nylon or aluminum standoffs • Easy to replace carbon fiber arms • Extremely durable SMA connector for attaching antennas which lowers the chances of damaging the video transmitter and allows quick and easy installation and removal of the antenna • Durable nylon fiberglass blend 5 in. props • Max flight time: dependent upon props • Max speed: 75+ mph MECHANICAL • STMF4 Flight Controller running RaceFlight/Betaflight • Flight camera: CCD, Wide Dynamic Range • Integrated clean power regulation • Integrated power distribution • 52 bright, addressable RDB LEDs, diffused through polycarbonate risers • Removable flight controller/OSD • Recommended battery: 3S or 4S Lipo • Multishot enabled 20Amp XM20 Speed Controller • Thrust UAV tuned race motors SOFTWARE FEATURES • Modular Integrated Flight System with on-screen display (battery voltage, battery capacity, video frequency) • Control video channels, frequency and power output via radio transmitter using the on-screen display • Integrated flight system comes pre-configured (plug and play) • Compatible with PPM, SBUS, XBUS, Spectrum R/C systems • Fully configurable via OSD, no PC required • ESC beeps when inactive for 5 minutes and can be used in a lost model situation • Configuration app: Raceflight/Betaflight SPECIFICATIONS INTRODUCING THE ALL-NEW INTRODUCING THE ALL-NEW www.riotpro.eu For more information, visit: www.riotpro.eu