Turbosocks Rigid Collar Install Last night, I finally got around to installing the rigid collar kit on my car. Went quite easily. Needed a breaker bar to get the bolts in the front loose though. Tools needed: • Jack stands • Jack • 19mm deep socket + socket wrench • breaker bar Most important item.. Tightening torque : Sub frame mounting bolt & nut 156.9 ~ 176.5N.m(16.0 ~ 18.0kgf.m, 115.7 ~ 130.2lb-ft) That is on all four points. Step one: Jack up the car in the front as high as you can, place jack stands. Step two: Use breaker bar and break loose the subframe nuts in the front. You will have to access them through the ~2" holes in the subframe. Remove the nuts and insert the collars marked 'F' and hand tighten the nuts. This image has been resized. Click this bar to view the full image. The original image is sized 1499x845.
5
Embed
Rigid Collar Install - Turbosocks Performanceturbosocks.com/assets/rigid_collars.pdfTurbosocks Rigid Collar Install Last night, I finally got around to installing the rigid collar
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Turbosocks Rigid Collar Install
Last night, I finally got around to installing the rigid collar kit on my car. Went quite
easily. Needed a breaker bar to get the bolts in the front loose though.