RIGGING SERVICES AND PRICE LIST - Crowley's · Custom Rigging Crowley’s Rig Shop can produce load tested custom fibrous uni-directional rigging that is designed specifi-cally for

RIGGING SERVICES AND PRICE LIST

2

RIG 100 – FULL SERVICE

Build, clean and step rig. Static tune to approx. sailing tension. Rig boom and control lines, run halyards. Make electrical connec-tions at mast base.

(Inside Storage Customers) $16.00/boat ft. $20.00 materials (Outside Storage Customers and Non Storage Customers) $18.00/boat ft. $20.00 materials

RIG 103 – STEP AND TUNE ONLY Build, clean and step rig. Static tune to approx. sailing tension. Owner then would have to rig boom, control lines, and hook up electrics.


RIG 110 – STEP ONLY Owner builds mast. Mast stepped with pins only, NO tune, NO tape, NO electrical connections. Owner takes responsibility for all work outside stepping mast. If Crowley’s finds it necessary to do additional work in order to step the mast, the owner will be billed accordingly.


MIZZEN MAST

As above at half boat ft. + $20.00 materials

Mast Stepping

RIG 200 – FULL SERVICE

(Sails must be removed first, see below) Remove boom and control lines, secure halyards to mast, de-pin turnbuckles, disconnect electrics at mast base. Unstep mast, brief inspection of rig, remove spreaders and prepare mast for storage as necessary.


RIG 210 – OWNER PREPPED

Owner must follow Owner Prepped Checklist for unstepping. Crowley’s will unstep the mast, perform brief inspection of rig, remove spreaders and prepare mast for storage as necessary. If Crowley’s finds it necessary to do additional work to unstep the mast, the owner will be billed accordingly.


MIZZEN MAST

As above at half boat ft. + $20.00 materials

Mast Unstepping

3434 East 95th Street Chicago, Illinois 60617

Phone 773-221-9990 Fax 773-221-9991

www.crowleys.com

3

Mast Up Winterization Mast Up Winterization (Boats storing Mast-Up Only)

RIG 440 - Instrument Saver Remove Windex and wind instrument from masthead, place in cabin. In the spring, re-install the windex and instrument, lubricate masthead sheaves, re-tape spreader ends as necessary.

$165 + materials

RIG 441 - HALYARD SAVER Remove halyards from mast, replace with messenger lines. Place halyards in cabin. Re-install the halyards in the spring. Messenger lines left on boat for re-use next winter.

$220 + materials

RIG 442 - INSTRUMENT SAVER + HALYARD SAVER

$330 + materials


Phone 773-221-9990 Fax 773-221-9991

www.crowleys.com

4

Rig Sails and Canvas

RIG 400 - LOA up to 34ft

$140/sail

RIG 401 - LOA 35 to 40ft

$165/sail


$220/sail


$275/sail

RIG 404 - LOA 51ft and up

$330/sail

RIG 405 – Install Canvas

$55/item

RIG 425 - LOA up to 34ft

$140/sail


$165/sail


$220/sail


$275/sail

RIG 429 - LOA 51ft and

above

$330/sail

RIG 405 – Remove Canvas

$55/item

De-rig Sails and Canvas

RIG 430 — Sail Service

Remove sails from boat and place on

rack for sailmaker to pick up. When sails are returned, to sail rack

we take them back to the boat.

$110 + loft fees

(Does not include rigging/derigging

of sails)

Loft fees vary per sail for wash/inspection/repair.

Sail Repair and Cleaning Service


Phone 773-221-9990 Fax 773-221-9991

www.crowleys.com

5

We are factory-trained and authorized to repair and service Sailtec, Navtec, and Selden hydraulics. These hydraulic systems work at high pressures and a damaged or incorrectly installed seal can render the sys-tem useless. We have the specialist tools and information necessary to replace seals properly.

BACKSTAY ADJUSTERS

Backstay adjusters feature a built-in pump. If your hydraulic backstay

adjuster is not holding or reaching the desired pressure, or there is a pud-dle of oil on the deck underneath it, bring it to us for a complete rebuild with new seals. A repair kit may be necessary if the piston rod has been

scratched, or if the clevis jaw is seized to the top end of the rod.

CYLINDERS

Cylinders are operated with a remotely mounted pump and valve. If the cylinder is leaking oil or not holding pressure, new seals are required. A

repair kit is necessary if the piston rod has nicks and/or scratches that cannot be polished out. Cylinders are normally charged with air – do not

try to disassemble one yourself.

BOOM VANGS

Is your hydraulic boom vang failing to support the boom? The lower end of the vang is charged with Nitrogen gas and over time it can leak.

A new set of seals may also be needed. We are able to recharge hydrau-lic boom vangs as well as replace the seals.

(Warning: Vangs are charged with gas to high pressures. Please do not try to disassemble one yourself)

PUMPS & VALVES

Serviced and repaired. Hydraulic system flush service also available.

PRICES VARY DEPENDING ON SIZE AND TYPE. PLEASE CONTACT US FOR FURTHER INFORMATION.

Yacht Hydraulic Systems Service


Phone 773-221-9990 Fax 773-221-9991

www.crowleys.com

6

Wire Swaging

Wire swaging up to 1/2” diameter wire.

$35.00/swage

Rod Heading

Rod heading from – 4 to – 40 rod.

$60.00/cold head

Nicopress Swage

$15.00/swage

Traditional Rigging

(Liverpool Wire Splices in 7 x 7 and 7 x 19 Wire Rope)

Billed at hourly rate.

Standing Rigging and Lifelines

We stock yacht and architectural fittings from leading manufacturers and can provide

timely services. For more information see our section on standing rigging or contact us

for more details.


Phone 773-221-9990 Fax 773-221-9991

www.crowleys.com

7

RIG 420 — Winch Service

$65 per winch speed

(2 speed winch = $130)plus parts if needed.

Winch Service

RIG 410— Furling System Service (For both headsail furling and mainsail

furling systems.)

$110.00 an hour plus parts. Some circumstances may require going aloft

which will be charged at a higher rate.

Furling System Service


Phone 773-221-9990 Fax 773-221-9991

www.crowleys.com

8

Rigging Inspections and Consultations


Phone 773-221-9990 Fax 773-221-9991

www.crowleys.com

Rig 700 Level A

Visual Deck Inspection At Deck Level With Mast Up

General visual inspection of mast and rigging system.

Check all fittings & terminations at deck level, halyards, mast base, partners, halyard blocks, chainplates.

Check for cracks, corrosion, pitting, rust, broken strands, loose fasteners.

Brief report of findings and any work carried out.

$110 + parts for minor repairs

Rig 701 Level B

Visual Inspection Aloft With Mast Up

Level A Inspection plus:

Inspection of fittings & terminations, spreaders, sheaves, headstay, backstay, lights, furling systems, boom, vang, spinna-

ker pole/bowsprit, hydraulics, deck hardware.

Make any minor repairs as needed.

Report with findings and recommendations.


9

Rig 703 Level C + Rod Rigging

Level C Inspection plus:

Disassembly of all rod terminals, where possible

Cleaning and inspection of accessible rod heads with dye penetrate testing

Report with findings and recommendations for re-heading or replacing rods as appropriate


For boats under 45 feet

For boats over 45 ft. please contact us for pricing.


Phone 773-221-9990 Fax 773-221-9991

www.crowleys.com

Rig 702 Level C

Full Inspection With Mast Down

Complete disassembly of mast and rigging.

Visual inspection of rigging terminals for cracks, corrosion, broken strands, rust.

Full inspection of all fittings, sheaves, shrouds, halyards, running rigging, spreaders, furling systems, boom, vang, winches,

deck hardware, mast lights.

Make minor repairs as needed.

Report with findings and recommendations.

$330 + parts for minor repairs (Does not include unstepping the mast)

Rigging Inspections and Consultations

10

PACK MAST FOR SHIPPING (RIG 000)

$110/hr. (Avg. 2 - 3 hrs.)

(Avg. 2 - 3 hrs.) Materials:

$50-$150/mast

Build lumber supports for mast on deck:

Price varies by boat and variety

Pack Mast For Shipping

PACK BOAT FOR SHIPPING (RIG 000)

$110/hr. (Approx. 4 – 8 hrs.)

Materials:

$50-$150/boat

Pack Boat For Shipping


Phone 773-221-9990 Fax 773-221-9991

www.crowleys.com

11

Cordage and Splicing Charges

Double Braid Eye Splice

Eye splice for “Low-tech” double-braid lines, ie. Sta-Set

$25.00/splice

Core Splice

Eye splice for “High-tech” double-braid lines, ie. Spectra/

Dyneema, Vectran, etc.

$25.00/splice

Cover Strip

Strip cover from the working end of High-tech lines to reduce

weight/friction.

$40.00/halyard

Single Braid Core Splice

Eye splice in uncovered single braid line

$20.00/splice

Core Insertion

Extra line added inside to increase line diameter

$30.00

Reeving Eye

Non load-bearing eye splice in tail of halyard

$6.00

Whipping

Whipping on rope tail to prevent fraying

$6.00

Three Strand Splice

$20.00/splice

Continuous Line Splice

For continuous line drive furlers.

$20.00/splice

Tail Splice

Soft Line to Wire Rope

$100.00/splice

We stock a full range of cordage for pleasure marine purposes.

Splicing charges do not cover the cost of rope or hardware.


Phone 773-221-9990 Fax 773-221-9991

www.crowleys.com

12

Custom Rigging Crowley’s Rig Shop can produce load tested custom fibrous uni-directional rigging that is designed specifi-

cally for the loads generated in various applications on your boat.

We can also provide you with traditional rigging, Liverpool wire splices, leather and decorative work.

All work charged at regular hourly rates. Discount given for larger projects.


Phone 773-221-9990 Fax 773-221-9991

www.crowleys.com

13

LENGTH

DISPLACEMENT

LINE SIZE

Up to 25’

Less than 5,000 lbs.

5/8”

26’ – 35’


3/4”

36’ – 41’


7/8”

42’ – 48’


1”

Mooring Bridles

Recommended Sizing

LINE SIZE

5/8”

3/4”

7/8”

1”

Base price with new hardware

$175

$210

$300

$325

Base price with existing hardware

$150

$175

$215

$250

Pricing

Sew on Leather Chafe Guards

$3.00 an inch/$90.00 for both lengths

BOA CG 1-BG $29.95 1” Blue Grey Leather (2) 15” Lengths

BOA CG 78-BG $29.95 7/8” Blue Grey Leather (2) 15” Lengths




Options

We can further customize your mooring bridle to fit your boat or to make less susceptible to

chafe. Please contact us with questions.


Phone 773-221-9990 Fax 773-221-9991

www.crowleys.com

14

Measuring for Your New Mooring Bridle

We can further customize your mooring bridle to fit

your boat or to make less susceptible to chafe.

Please contact us with questions.


Phone 773-221-9990 Fax 773-221-9991

www.crowleys.com

L1

Overall Length_____________

L2

Measure from the end to beginning of

chafe gear.______________________

L3

Eye or

Cleat Size________

L4

Chafe gear

length_________

15


Phone 773-221-9990 Fax 773-221-9991

www.crowleys.com

Deck Hardware Installation and Service

General Rigging Labor

Rig 000 —Rigging Labor

$110/hr.

Rig 300 – Man Aloft

$220/hr.

Rig 010 — Harbor Call

$130/hr. minimum

Rig 010 — Harbor Call Man Aloft

$260/hr. minimum

RIGGING SERVICES AND PRICE LIST - Crowley's · Custom Rigging Crowley’s Rig Shop can produce load tested custom fibrous uni-directional rigging that is designed specifi-cally for

Documents