ROTARY DRILLING COMPANY DHR-200 (Depth Range 4000 m) Drawworks Mast Substructure Power Mud Pumps Rotary Table Hook/Block Swivel Blowout Equipment Mud Tanks Solids Control Drill pipe Drill Collars Cabins Other Equipment TF 25 (Romanian) - 1 1/4" drilling line - 6032 BAYLOL EDDY Current Brake KANIZSA-300 (DKG) - mast 42 m (137') max. hook load with 10 lines = 200 tons (440917 lb) Rig floor height from ground: 4,9 m (16') clear height: 3,6 m (11,8') casing load capacity: 300 tons (661375 lb) setback capacity: 240 tons (529100 lb) 2xCat 3512 and 1x12VFES 17/27 engines mechanical compound for distributio to mud pumps and drawworks 1x P-1300 triplex (Ganz) and 1x CA-700 (Ganz-Marep) pumps driven from compound MRS 27 1/2", driven by drawworks through catworks MC-200 (Romanian) 5 sheaves 200 tons (440917 lb) capacity CH-200 (Romanian) 200 tons (440917 lb) capacity 1x20 3/4"-3000 PSI Cameron "U" single ram 1x13 5/8"-5000 PSI Cameron "U" double ram 1x13 5/8"-5000 PSI Hydril "GK" annular 1x11" -5000 PSI Hydril "GK" annular, as required BOP control system: One complete set of Koomey hydraulic BOP accumulator and control unit 1x4 1/16" choke - 2 1/16" kill line manifold 5000 PSI with two adjustable manual choke with control. Drilling spools and adapters according to requirements 3 4 mud tanks: 120 m (756 bbls) complete with LP mixing system, mud agitators 3 2 water tanks: 86 m (542 bbls) 2x Linear Swaco shale shakers, 1x CT3-300 desander, 1x10x4" cones mud cleaner (SWACO), 1x SWACO degasser, centrifuges (SWACO) as required 5" OD 19,5 lbs/ft - grade E/G NC-50 3 1/2" OD 13,3 lbs/ft - grade E/G NC-38, as required 30x8" OD x 2 13/16" ID spiral 6 5/8" REG 30x6 1/2" OD x 2 13/16" ID spiral NC-50 30x4 3/4" OD 2 1/4" ID spiral NC-38 24x5" HWDP NC-50 24x3 1/2" HWDP NC-38, as required 1x driller office, 1x tool pusher office, 2x crew cabins 1x workshop, 1x material stock Instrumentation - Indication and registration of main drilling paramteres. Emergency generator, compressor station, diesel fuel tank, casing stabbing board, fork lift, gas flare, dog house, pipe rack, kelly spinner, power slip, ezy torque, spinning wrench, as required. DHR-200 (Depth Range 4000 m)
RIG_fleet
Oct 27, 2015
rig fleet information
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
ROTARY DRILLING COMPANY
DHR-200 (Depth Range 4000 m)
Drawworks
Mast
Substructure
Power
Mud Pumps
Rotary Table
Hook/Block
Swivel
Blowout Equipment
Mud Tanks
Solids Control
Drill pipe
Drill Collars
Cabins
Other Equipment
TF 25 (Romanian) - 1 1/4" drilling line - 6032 BAYLOL EDDY Current Brake
KANIZSA-300 (DKG) - mast 42 m (137') max. hook load with 10 lines = 200 tons(440917 lb)
Rig floor height from ground: 4,9 m (16') clear height: 3,6 m (11,8') casing loadcapacity: 300 tons (661375 lb) setback capacity: 240 tons (529100 lb)
2xCat 3512 and 1x12VFES 17/27 engines mechanical compound for distributio to mud pumps and drawworks
1x P-1300 triplex (Ganz) and 1x CA-700 (Ganz-Marep) pumps driven from compound
MRS 27 1/2", driven by drawworks through catworks
MC-200 (Romanian) 5 sheaves 200 tons (440917 lb) capacity
CH-200 (Romanian) 200 tons (440917 lb) capacity
1x20 3/4"-3000 PSI Cameron "U" single ram1x13 5/8"-5000 PSI Cameron "U" double ram1x13 5/8"-5000 PSI Hydril "GK" annular1x11" -5000 PSI Hydril "GK" annular, as requiredBOP control system: One complete set of Koomey hydraulic BOP accumulatorand control unit1x4 1/16" choke - 2 1/16" kill line manifold 5000 PSI with two adjustable manualchoke with control. Drilling spools and adapters according to requirements
34 mud tanks: 120 m (756 bbls) complete with LP mixing system, mud agitators32 water tanks: 86 m (542 bbls)
2x Linear Swaco shale shakers, 1x CT3-300 desander,1x10x4" cones mud cleaner (SWACO), 1x SWACO degasser, centrifuges(SWACO) as required
5" OD 19,5 lbs/ft - grade E/G NC-503 1/2" OD 13,3 lbs/ft - grade E/G NC-38, as required
30x8" OD x 2 13/16" ID spiral 6 5/8" REG30x6 1/2" OD x 2 13/16" ID spiral NC-5030x4 3/4" OD 2 1/4" ID spiral NC-3824x5" HWDP NC-5024x3 1/2" HWDP NC-38, as required
1x driller office, 1x tool pusher office, 2x crew cabins1x workshop, 1x material stock
Instrumentation - Indication and registration of main drilling paramteres.Emergency generator, compressor station, diesel fuel tank, casing stabbing board,fork lift, gas flare, dog house, pipe rack, kelly spinner, power slip, ezy torque,spinning wrench, as required.
DHR-200
(Dep
th R
ange
400
0 m
)
ROTARY DRILLING COMPANY
Drawworks
Mast
Substructure
Power
Mud Pumps
Rotary Table
Hook/Block
Swivel
Blowout Equipment
Mud Tanks
Solids Control
Drill pipe
Drill Collars
Cabins
Other Equipment
H 37 ED IDECO 1" drilling line, hydromatic brake: Model: 122, Fawick AirflexClutch Catworks: Foster-Model 27 breakout and make - up cat heads
KM 103-212 GH Kwik-lift, hydraulically raised, telescoped mast: 31,5 m (103')max. hook load with 8 lines = 92,8 tons (204405 lb)
Rig floor height from ground 3,80 m (12,7') clear height: 3,20 m (11,8') casingload capacity: 92,8 tons (204405 lb)setback capacity: 95 tons (209435 lb)
1x Cat 3406 DITA 380 HP mechanical compound to drawworks
1xPZ-8 (Gardner Denver) triplex pump (stand by) Powered by D 398 CAT.
LR-175, 17 1/2" rotary table driven by drawworks
IDECO shorty UTB-110-3-24 4 sheaves, 110 tons (242504 lb) capacity
IDECO TL-120, 120 tons (264550 lb) capacity
1x11"-5000 PSI Cameron "U" double ram1x11"-5000 PSI Hydril "GK"annular1x7 1/16"-5000 PSI Cameron "U" double ramBOP control system: One complete set of Koomey hydraulic BOP accumulatorand control unitOne complete set of Cameron 4 1/16"x5000 PSI WP choke and kill manifold
33 mud tanks: 90 m (567 bbls) complete with LP mixing system, mud agitators32 water tanks: 86 m (542 bbls)
2x Ganz double deck as required
3 1/2" 13,3 lbs/ft grade F/G NC-382 7/8" 10,4 lbs/ft grade E/G NC-312 3/8" 6,65 lbs/ft grade E/G NC-26
24x4 3/4" OD x 2 1/4" ID NC-3824x3 1/2" OD x 1 1/2" ID NC-26
1x driller office, 1x tool pusher office, 1x crew cabin1x workshop, 1x material stock
Instrumentation-indication and registration of main workover parameters,compressor station, diesel fuel tank, gas flare, pipe racks, power slip, spinningwrench etc. Sandline dia: 5/8", drum capacity: 4,800 m (15749')
IDECO-SBS DIR 5506 mobile drilling and workover rig (Depth range 1800 m)
Rig self propelled mechanical-hydraulic, drive-in type, a modification of the original
IDECO DIR 5525 Rambler Rig.
Equipped with hydraulic telescopic 103 ft mast, double drum drawworks, transmission,
engine, and rotary drive unitized on a carrier.IDEC
O-SBS D
IR-5
506
A self propelled machanical-hydraulic, drive-in rambler rig, complete in all respect for
drilling operations, with drawworks, mast, rig engines and ritary drive unitized on a self
propelled, tyre mounted carrier.
IDECO-SBS DIR-806 mobile drilling and heavy workover rig
Drawworks
Mast
Substructure
Power
Mud Pumps
Rotary Table
Hook/Block
Swivel
Blowout Equipment
Mud Tanks
Solids Control
Drill pipe
Drill Collars
Cabins
Other Equipment
IDECO H-1000, 1 1/8" drilling line, auxiliary brake: Parmac 22 DPspinning cat head: Forster 27B
IDECO-SBS KM 112 358 AGH, telescoped - mast 34 m (112'). max hookload with 10 lines = 160 tons, (352733 lb) set back capacity: 95 tons (209435 lb)
Rig floor height from ground 3,80 m (12,7')clear height: 3,6 m (11') casing load capacity: 200 tons (440917 lb)setback capacity: 95 tons (209435 lb)
2x Cat 3406 B DITA 480 HP each mechanical compound to drawworks[compound: Allison converter CLBT 5861]
2x PZ-8 (Gardner Denver) triplex pumps (stand by), D-398 Powered
IDECO 205 20,5" rotary table driven by drawworks
IDECO shorty UTB-160-5-30/ 5 sheaves, 160 tons (352733 lb) capacity
IDECO TL-200 200 tons (440917 lb) capacity
1x13 5/8"-5000 PSI Cameron "U" double ram1x13 5/8"-5000 PSI Cameron "A" double ram1x11" -5000 PSI Cameron "U" double ram1x11" -5000 PSI Hydril "GK" annular1x7 1/16"-5000 PSI Cameron "U" double ramBOP control system: One complete set of Koomey hydraulic BOPaccumulator and control unit. One complete set of Cameron4 1/16"x5000 PSI WP choke and kill manifold
34 mud tanks: 120 m (75 bbls) complete with LP mixing system, mud agitators32 water tanks: 86 m (542 bbls)
1x Baroid double deck and 1x ultra Cagle shale shakers, 1x CT2-300 desander,1x10x4" cones mud cleaner (SWACO), 1x SWACO degasser, centrifuges(SWACO) as required
5" OD 19,5 lbs/ft grade E/G NC-503 1/2" OD 13,3 lbs/ft grade E/G NC-38,
30x8" OD x 2 13/16" ID spiral 6 5/8" REG30x6 1/2"x 2 13/16" ID spiral NC-5030x4 3/4" OD 2 1/4" ID spiral NC-3824x5" HWDP NC-50
1x driller office, 1x tool pusher office, 1x crew cabin1x workshop, 1x material stock
Instrumentation-indication and registration of main workover parameters,compressor station, diesel fuel tank, gas flare, pipe rack, power slip, spinning wrench,hydraulic cathead, sand line dia 5/8", drum capacity4800 m.
IDEC
O-SBS D
IR-8
06
IDECO-SBS DIR-379
A self propelled machanical-hydraulic, drive-in rambler rig, complete in all respect for
drilling operations, with drawworks, mast, rig propelled, tyre mounted carrier.
Drawworks
Mast
Substructure
Power
Mud Pumps
Rotary Table
Hook/Block
Swivel
Blowout Equipment
Mud Tanks
Solids Control
Drill pipe
Drill Collars
Cabins
Other Equipment
H 35 ED IDECO 1" drilling line, Brake: PARKERSBURG 15" B
KM 90-180 GHA hydraulically raised telescoped up mast: 27 m (88,5')
Rig floor height from ground: 3 m (10')Clear height: 2,5 m (8'), Casing load capacity: 130 tons (286596 lb) setback capacity: 95 tons (209435 lb)
1 DEUTZ F12L 714, 265 HP mechanical compound to drawworks.
PAH-275 (Gardner Denver) triplex pump (Stand by) Powered by CAT-3408
IDECO LR-175, 17 1/2" rotary table driven by drawworks.
IDECO UTB-100-3-24, 4 sheaves, 100 tons (220458 lb) capacity
IDECO TL 120, 120 tons (264550 lb) capacity
1x7 1/16"-5000 PSI Cameron "U" double ram1x7 1/16"-3000 PSI Hydril "GK" annular BOPBOP control system: One complete set of Koomey hydraulic BOP accumulator and control unitOne complete set of Cameron 4 1/16"x5000 PSI WP choke and kill manifold
33 active tanks: 90 m (567 bbls) complete with LP mixing system, mud agitators32 water tanks: 86 m (542 bbls)
2x Ganz double deck as required
2 7/8" 10,4 lbs/ft Grade E/G NC-312 3/8" 6,65 lbs/ft Grade E/G NC-26
24x4 3/4" OD x 2 1/4" ID NC-3824X3 1/2" OD x 1 1/2" ID NC-26
1x driller office, 1x tool pusher office, 1x crew cabin1x workshop, 1x material stock
Instrumentation - indication and registration of main drilling parametres, compressor station, diesel fuel tank, gas flare, pipe racks, power slips, spinningwrench, as required. Sandline dia: 5/8", capacity 3500 m (11483,5') serviceplatform: 650 mm (2') - 3000 mm (10')
ROTARY DRILLING COMPANY
IDEC
O-SBS D
IR-3
79
ROTARY DRILLING COMPANY
IDECO-SBS DIR-110
A self propelled machanical-hydraulic, drive-in rambler rig, complete in all respect for
drilling and workover operations, with drawworks, mast, rig engine and rotary drive unitized
on a self propelled, tyre mounted carrier.
Drawworks
Mast
Substructure
Power
Mud Pumps
Rotary Table
Hook/Block
Swivel
Blowout Equipment
Mud Tanks
Solids Control
Drill pipe
Drill Collars
Cabins
Other Equipment
IDECO-SBS Hydrair H35 CK drilling line 1" Brake Parkersburg 15"
IDECO-SBS KM 90 120 GH telescoped up. Height: 27,4 m (90')
Rig floor height from ground: 3 m (10')Clear height: 2,5 m (8'), Casing load capacity: 130 tons (286596 lb),setback capacity: 95 tons (209435 lb)
1x Cat. D-3306-B-DITA, 310 HP mechanical compound to drawworks Compound:Allison CLT-754 transmission
PAH-275 (Gardner-Denver) triplex pump (Stand by), Powered by CAT 3408
IDECO LR-175, 17 1/2" rotary table driven by drawworks
IDECO UTB-75-2-24, 2 sheaves, 75 tons (165344 lb) capacity
IDECO TL 120, 120 tons (264550 lb) capacity
1x7 1/16"-5000 PSI Cameron "U" double ram1x7 1/16"-3000 PSI Hydril "GK" annular BOPBOP control system: One complete set of Koomey hydraulic BOP accumulatorand control unitOne complete set of Cameron 4 1/16"x5000 PSI WP choke and kill manifold
3 33 active tanks: 3x32=96 m (605 bbls) 86 m (542 bbs) water tankcapacity
2x Ganz double deck as required
2 7/8" 10,4 lbs/ft Grade E/G NC-312 3/8" 6,65 lbs/ft Grade E/G NC-26
24x4 3/4" OD x 2 1/4" ID NC-3824X3 1/2" OD x 1 1/2" ID NC-26
1x driller office, 1x tool pusher office, 1x crew cabin1x workshop, 1x material stock
Instrumentation - indication and registration of main drilling paramteres, Compressor station, diesel fuel tank, gas flare, pipe rack, power slips, spinningwrench, as required. Sandline dia 5/8", capacity: 3500 m (11483,5') serviceplatform: 650 mm (2') - 3000 mm (10')
IDEC
O-SBS D
IR-1
10
ROTARY DRILLING COMPANY
IRI/IDECO ED 1200 - RIG 3
Drawworks MODEL: IRI/IDECO type ED-1200,two (2) DC motors type GE 752AR / 1000 HP each,Continuous Power: 1200 HP,Drum grooved for 1 1/4 “ drilling line,Electric Brake: Baylor Model 5032
Model: IRI/IDECO HMF 142-650,Height: 142’ (43.3 m), Base width: 21’ (6.4 m)Static hook load capacity with 10 lines: 650,000 lbs (295 T)
Substructure
Power
Mud Pumps
Rotary Table
Hook/Block
IRI/IDECO type swing-up,Substructure height: 30’ (9 m)Rotary table load capacity: 650,000 lbs (295 T)Set Back load capacity: 350,000 lbs (159 T)Total load capacity (set back + rotary) 1,000,000 lbs (454 T)
Four (4) Diesel Engines: Caterpillar 3512,Four (4) AC Generators: KATO 1200 KVA / 600 V / 50 HzSCR System: ROSS HILL Three (3) SCR
Two (2) IDECO T - 1300Each Pump Powered by: two (2) DC motors type GE 752AR / 1000 HP eachMaximum Working pressure: 5,000 PSI (350 at)
IRI/IDECO LR275 driven from drawworksOpening 27 1/2”, Load rating 1,400,000 lbs (517 T)
Travelling Block + Hook: IRI/IDECO type UTB-360-5-50Rated capacity: 790,000 lbs (360 T)Crown Block: IRI/IDECO Load Capacity: 820,000 lbs (372 T)
Mast
Swivel IRI/IDECO type TL-300,Load capacity: 600,000 lbs (275 T)Working pressure: 5,000 PSI (350 at)
Annular Preventer: Cameron type D 13 5/8”, 5,000 PSI (350 at)Ram Preventers:One (1) Single Ram 13 5/8” Cameron type U, 10,000 PSI (700 at)One (1) Double Ram 13 5/8” Cameron type U, 10,000 PSI (700 at)Choke manifold: Cameron 10,000 PSI (700 at)BOP Accumulator: Koomey type 80 model MQ 200-11 SB3
3Active Tanks: Three (3) total capacity: 1125 bbls. (180 m )3Reserve Tanks: One (1) total capacity: 375 bbls. (60 m )
3Trip Tank: One (1) total capacity: 40 bbls. (6.5 m )
Linear Motion Shale Shakers: Three (3) SWACO type ALSDesander: SWACO type 2-12Mud Cleaner: SWACOVacuum Degasser: SWACO
M/D TOTCO Instrumentation, Automatic Driller (Satelite), Set of Fishing Tools,Make Up Cathead (Foster 37-AH), Break Out Cathead (Foster 24-AH)
Blowout Equipment
Mud Tanks
Solids Control
Other Equipment
IRI/I
DECO E
D 120
0 - R
IG 3