Innometriks www.innometriks.com Innovation Fusing smart card, PKI and digital signature technologies, this multi-modal device is engineered specifically for high security applications requiring multifactor authentication The Rhino fills critical compliance gaps that exist in cur- rent generation physical access control systems. Proven in Tough Environments Ruggedized to operate in both indoor and outdoor environments. Optional outdoor and extreme kits allow the unit to withstand harsh direct weather conditions and temperatures down to -20°F. Outdoor weatherproof capable • Aluminum housing is Vandal Proof • Incremental SP800-116 Deployment The Rhino facilitate PACS compliance for all three U.S. Gov- ernment Identity Programs and provide a path to full in- teroperability of credentials issued to all Federal Government employees and contractors at federally controlled facilities. Dynamic Authentication Modes Set authentication factors to match the threat. Elevate to a different security threat level and the reader changes to the corresponding authentication mode. All readers are OCSP compliant for certificate path validation Card Serial Number • Serial Number Signature • Card Authentication Challenge • PKI Authentication Challenge • Template Server Biometric Authentication • Match on Card Biometric Authentication • Rhino FIPS201 PIV, TWIC & CAC Authentication Technology
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Innometriks
w w w.innometr iks.com
Innovation
Fusing smart card, PKI and digital signature technologies, this multi-modal device is engineered specifically for high security applications requiring multifactor authentication The Rhino fills critical compliance gaps that exist in cur-rent generation physical access control systems.
Proven in Tough Environments
Ruggedized to operate in both indoor and outdoor environments. Optional outdoor and extreme kits allow the unit to withstand harsh direct weather conditions and temperatures down to -20°F.
Outdoor weatherproof capable•
Aluminum housing is Vandal Proof•
Incremental SP800-116 Deployment
The Rhino facilitate PACS compliance for all three U.S. Gov-ernment Identity Programs and provide a path to full in-teroperability of credentials issued to all Federal Government employees and contractors at federally controlled facilities.
Dynamic Authentication Modes
Set authentication factors to match the threat. Elevate to a different security threat level and the reader changes to the corresponding authentication mode. All readers are OCSP compliant for certificate path validation
Network-based services allows enter-prise-wide Cheetah implementations to be managed from a central location
Secure Browser Based Management•
Network based Firmware Upgrades•
Configuration File Cloning •
Remote License Management•
Leading Edge Sensor
Manufacturer Lumidigm
Technology Optical multi-spectral imaging
Image resolution 500 dpi
Image bit depth 8bit, 256 gray scale
Imaging area 17.4 x 13.9 mm (rectangular)
Temperature 0 to 60°C
Humidity 0–95% RH non-condensing
Rhino FIPS PIV, TWIC & CAC Authentication Technology
Multiple Communication Interfaces
Support of multiple communication protocol bridges the gap between dated physical access control system technology, and new IP based technology
Wiegand In Wiegand Out
Ethernet Relay NO/NC
RS485 TTL
Durable
Aluminum Housing
Optional Extreme Seal Kit
Optional Heater
MTBF 60,000 hours
No Maintenance
Operational Boundaries
Power 12VDC, 750mA
Temperature -29°C to 50°C
Humidity 0–95% RH non-condensing
Weatherproof Built to IP65 Standards
Total Solution
Innometriks credential validation, registration and au-thentication suite regenerates traditional physical access control systems to meet or exceed the credential authen-tication requirements set forth by the U.S. Government identity programs.