RGU Series 35 RGU Series 85°C at 2000 Hours Guaranteed SPECIFICATIONS DIMENSION MULTIPLIER FOR RIPPLE CURRENT Operating Temperature Range Capacitance Tolerance Leakage Current Dissipation Factor (at 20°C, 120Hz) Temperature Characteristics (Impedance Ratio at 120Hz) Load Life (+85°C ) Shelf Life (+85°C ) -40~+85°C ±20% (at 20°C, 120Hz) 2,000 Hours after an application of DC bias voltage the rated ripple current. The peak voltage shall not exceed rated DC voltage Dissipation Factor Leakage Current Capacitance Change 200% of the initial specified value or less The specified value or less Within ±20% of the initial value Time Z(-25°C)/Z(+20°C) Z(-40°C)/Z(+20°C) W.V I < 0.01 CV or 3 uA whichever is greater ( at 20°C, after 2 minutes) CV < 1000:0.01CV+40uA ( at 20°C, after 2 minutes) CV 1000:0.04CV+100uA ( at 20°C, after 2 minutes) I: Leakage Current (uA) C: Nominal Capacitance (uF) V: Rated Voltage (V) Rated Voltage(V) 6.3~100 160~450 500 hours. No Voltage Applied. After Test: U R to be applied for 30 minutes, 24 to 48 hours before measurement. Rated Voltage(V) 0.28 6.3 5 6.3 12 4 10 10 3 16 8 2 4 25 5 35 4 50 63 100 160 200 250 350 400 450 3 15 10 0.24 10 0.20 16 0.16 25 0.14 35 0.12 50 0.10 63 0.08 100 0.20 160 0.20 200 0.20 250 0.24 350 0.24 400 0.24 450 tanδ When nominal capacitance is over 1000uf, tan δ shall be added 0.02 to the listed value with every increase of 1000uF D F a 1.0 L < 16:1.5 L > 16:2.0 d 0.5, L = 20:0.6 0.6 0.8 5 2.0 6.3 2.5 8 10 13 16 18 3.5 5.0 7.5 Frequency Coefficient Freq (Hz) CV (uF.WV) 6.3~16 50,60 120 1K 100K 25~35 50~100 160~450 ---------- ≦1000 >1000 ≦1000 >1000 ---------- 0.8 0.8 0.8 0.8 0.8 0.8 1.1 1.5 1.2 1.6 1.2 1.3 1.2 1.7 1.3 1.8 1.3 1.5 1.2 1.7 1.3 1.8 1.3 1.6 1 1 1 1 1 1 Rated Voltage(V) 10K < L + a Max 100 100 F(M) F(M)
2
Embed
RGU Series - ost · RGU Series 35 RGU Series 85°C at 2000 Hours Guaranteed SPECIFICATIONS DIMENSION MULTIPLIER FOR RIPPLE CURRENT Operating Temperature Range Capacitance Toler ance
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
RGU Series
35
RGU Series85°C at 2000 Hours Guaranteed
SPECIFICATIONS
DIMENSION MULTIPLIER FOR RIPPLE CURRENT
Operating Temperature RangeCapacitance Tolerance
Leakage Current
Dissipation Factor(at 20°C, 120Hz)
Temperature Characteristics(Impedance Ratio at 120Hz)
Load Life (+85°C )
Shelf Life (+85°C )
-40~+85°C±20% (at 20°C, 120Hz)
2,000 Hours after an application of DC bias voltage the ratedripple current. The peak voltage shall not exceed rated DC voltage
Dissipation FactorLeakage Current
Capacitance Change200% of the initial specified value or less
The specified value or less
Within ±20% of the initial value
Time
Z(-25°C)/Z(+20°C)Z(-40°C)/Z(+20°C)
W.V
I<0.01 CV or 3 uA whichever is greater( at 20°C, after 2 minutes)
CV < 1000:0.01CV+40uA( at 20°C, after 2 minutes)CV 1000:0.04CV+100uA( at 20°C, after 2 minutes)
I: Leakage Current (uA) C: Nominal Capacitance (uF) V: Rated Voltage (V)
Rated Voltage(V) 6.3~100 160~450
500 hours. No Voltage Applied. After Test: UR to be applied for 30 minutes, 24 to 48 hours beforemeasurement.
Rated Voltage(V)0.286.3
56.3
12410
10316
82 4
25
5
35
4
50 63 100 160 200 250 350 400 450
3 15 10
0.2410
0.2016
0.1625
0.1435
0.1250
0.1063
0.08100
0.20160
0.20200
0.20250
0.24350
0.24400
0.24450
tanδWhen nominal capacitance is over 1000uf, tan δ shall be added 0.02 to the listed value with everyincrease of 1000uF