RF Switch IC Guide

RF Switch IC Guide

2013A Business Partner of Renesas Electronics Corporation.

fast and easy Making your Switch Selection

A World Leader in RF Switch ICs with Over 50 Years of Wireless Experience

About CELCalifornia Eastern Laboratories (CEL) is the exclusive sales and marketing partner in the Americas for products made by the Compound Semiconductor Devices Business Division (CSDBD) of Renesas Electronics Corporation, formerly NEC Electronics Corporation. These products include RF components, RF ICs, Optocouplers, Solid State Relays, Lasers and Detectors for Fiber Optics.

CEL serves designers, OEMs and contract manufacturers in the RF & Wireless, Mobilecomm, Multimedia, Broadband Communications, Industrial Control, and Automated Test Equipment (ATE) markets. With over 50 years experience in high frequency design, customer support and fulfillment, CEL is ideally positioned to provide its customers with solutions tailored to meet their specific needs.

CEL maintains extensive inventories and provides engineering and applications assistance at its technical centers in Santa Clara, CA. and Wauconda, IL. The company supports customers through sales offices, sales representatives and distributors in numerous locations.

CEL Headquarters

4590 Patrick Henry DriveSanta Clara, CA 95054Tel: (408) 919-2500Fax: (408) 988-0279

www.cel.com

Select your Switch Category by Selecting a

Color Tab.

Look at the Comparison Table and choose your Switch Based on Cost,

Performance and/or Size.

Not Sure? Find the Most Widely Used Switches for your Application.

1 2 3

RF Switch IC GuideMaking your Switch Selection fast and easy

Getting Started as Easy as 1-2-3

SWITCH CATEGORY

PAGE NO.

RF Switching Basics

SP3T and SP4T Switches

SPDT Switches with 0.1dB Compression Point < 2 Watts

DPDT Switches

SPDT Switches with 0.1dB Compression Point > 2 Watts

Special Funciton: Antenna Tuning, Transfer Jet™ and FeliCa™

SPDT Absorptive Switches

SPnT Antenna Switch Modules and ICs for Mobilecomm

Select Switch by Application

Package Styles and Dimensions

2-3

4-5

6

7

8

9

10

11

12

13

2

RF Switch IC Guide

An RF switch is a microwave device that routes high frequency signals through transmission paths. CEL Switches

are used for diverse applications such as WLAN, Mobile Communications, Wireless Security, Wireless Home

Automation, Digital TV and many other RF applications.

CEL offers a broad selection of RF Switches with many configurations, package styles and performance

attributes. With so many choices, it’s understandable that selecting the right switch can be confusing.

Our wireless experts make it easier to select the right RF Switch for your application.

The Basics

RF Switching Basics

ExternalDC Block

RF Common

Port

ControlVoltage

1

ControlVoltage

2

ExternalDC Block

ExternalDC Block

RF Port 1 RF Port 2Q3Q2

InternalDC Block

InternalDC Block

Inside RF Switch ICs: A Closer Look Popular Application Example

PA

LNA

TR Switch

Antenna

Typical SPDT with Series-Shunt Configuration. Some Switches have an internal decoder to reduce the number of control ports.

This popular application demonstrates a SPDT Switch being used to route a RF signal from either a Transmit path or a Receive path to the system antenna.

3

RF Switch IC Guide

2PIN

3PIN

5PIN

4PIN

6

Vcount2

RFC

Vcount1

GND

RF2

RF1

PIN

1PIN

Bidirectional Switch Operation

Power Considerations for your RF Switches

510 12 14 16 18 20

Input Power (dBm)

Output Power vs. Input Power

Out

put P

ower

(dBm

)

22 24 26 28 30

10

15

20

25

30

It is not recommended to operate a switch at its P1.0dB compression pointdue to the higher relative insertion lossassociated with this power level.

Better to operate below the min P (0.1) dB point to assure the switch will not contribute excessive loss.

Just starting to compress by 0.1dB.

1. What Switch Type do you need? (SPDT, SP3T, etc.)

2. What is the RF Frequency Range that you need?

3. How much Power Handling will you need?

4. What Insertion Loss do you need?

5. What Isolation do you need?

6. What Switching Speed are required?

7. What are the Number of Controls Lines available?

8. What Package Size is ideal?

9. What is the Lowest Cost Solution?

Top Questions to consider before Selecting an RF Switch

ASK

Lowest CostSolution

Power Handling

Switch Type

Isolation SwitchingSpeed

No. of Controls

PackageSize

FrequencyRange

InsertionLoss

Our switches are generally bidirectional,

meaning that the RF “Throw” ports may

be used as input or output ports. See

diagram on right.

4

Single Pole Double Throw (SPDT) Switches with 0.1 dB Compression Point < 2 Watts

RF Switch IC Guide

PARAMETERS UNITS UPG2179TB UPG2214TB UPG2406T6R UPG2406TK UPG2408TK UPG2214TK UPD5713TK UPG2159T6R

Frequency Range GHz 0.05 to 3.0 0.05 to 3.0 0.01 to 3.0 0.01 to 3.0 0.05 to 3.0 0.05 to 3.0 0.05 to 2.5 0.05 to 3.0

Vsupply V – – – – – – 1.8, 2.8, 3.6 –

Vcontrol V 2.5, 3.0, 5.3 1.8, 3.0, 5.3 1.8, 3.0, 3.3 1.8, 3.0, 5.3 2.5, 3.0, 5.3 1.8, 3.0, 5.3 1.8, 2.8, 3.6 1.8, 2.7, 3.3

Number of Controls – 2 2 2 2 2 2 1 2

Insertion Loss @2.5Gz dB 0.35 0.35 0.47 0.47 0.50 0.35 0.95 0.25

Insertion Loss @6GHz dB – – – – – – – –

Isolation @2.5GHz dB 24 26 17 17 18 26 22.5 27

Isolation @6GHz dB – – – – – – – –

Return Loss @ .5GHz dB 20 20 20 20 20 20 17 20

Return Loss @6.0GHz dB – – – – – – – –

P0.1 dB @2.5GHz dBm +29 +23 +29 +29 +29 +23 +17 @1GHz +22

P0.1 dB @2.5GHz @Vcont =1.8V dBm – +17 +22 +22 – +17 – +15.5

P0.1dB @6.0GHz dBm – – – – – – – –

P1dB @2.5 GHz dBm +32 +27 +30.5 +30.5 – +27 +21 @1GHz +25.5

P1dB @6.0GHz dBm – – – – – – – –

Input IP3 dBm +60 +58 +60 +60 +60 +58 – +49

Harmonics 2nd dBc – -55 @15dBm -75 @20dBm -75 @20dBm – -55 @15dBm – -77 @10dBm

Harmonics 3rd dBc – -55 @15dBm -75 @20dBm -75 @20dBm – -55 @15dBm – -80 @10dBm

Control Current uA 4 4 0.2 0.2 0.3 4 0.01 0.2

Supply Current uA – – – – – – 0.01 –

Switching Speed ns 50 20 50 50 50 20 30 20

Logic for “ON” HighLow Low Low High High Low Low – High

Package Size mm 2.0 x 2.1 x 0.9 2.0 x 2.1 x 0.9 1.0 x 1.0 x 0.37 1.5 x 1.3 x 0.55 1.5 x 1.3 x 0.55 1.5 x 1.3 x 0.55 1.5 x 1.3 x 0.55 1.0 x 1.0 x 0.37

Price Rank – Lowest Same as UPG2214TB Same as UPG2406TK Same as UPG2406TK Same as UPG2406TK Same as UPG2406TK

Applications – General Purpose including 2.4GHz WLAN General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose

Advantages –Lowest cost SPDT;

Highest shipment volume

Low cost general purpose SPDT;

Drop-in compatible with the UPG2179

Low cost general purpose

SPDT in smallest package

Low cost general purpose SPDT in

smaller package than the UPG2214TB or

UPG2179TB

Alternative to UPG2406TK with

opposite logic

Alternative to UPG2214TB in smaller package

Lowest cost single control SPDT

Lowest insertion loss SPDT; Good isolation

performance; smallest package

Bold = Focus Features

Continued on the Next Page.

Note: All values listed are typical performance.

5

Single Pole Double Throw (SPDT) Switches with 0.1 dB Compression Point < 2 Watts

RF Switch IC Guide

PARAMETERS UNITS UPG2012TK UPG2185T6R UPG2422TK UPG2163T5N UPG2411T6R UPG2411T7C UPG2415T6X UPG2415TK

Frequency Range GHz 0.5 to 2.5 2.0 to 6.0 0.05 to 6.0 0.5 to 8.0 1 .0 to 8.0 2.0 to 6.0 0.05 to 6.0 0.5 to 6.0

Vsupply V 2.7, 2.8, 3.0 – – – – – – –

Vcontrol V 2.7, 2.8, 3.0 2.8, 3.0, 3.3 1.8, 3.0, 5.3 2.8, 3.0, 5.0 1.8, 3.0, 3.6 2.8, 3.0, 3.3 2.7, 3.0, 3.3 2.7, 3.0, 5.3

Number of Controls – 1 2 2 2 2 2 2 2

Insertion Loss @ 2.5Gz dB 0.30 0.40 0.35 0.40 0.50 0.50 0.45 0.45

Insertion Loss @6GHz dB – 0.50 0.55 0.50 0.60 0.70 0.55 0.65

Isolation @2.5GHz dB 30 26 28 38 25 25 28 28

Isolation @6GHz dB – 25 24 30 25 25 26 26

Return Loss @2.5GHz dB 20 20 20 20 25 17 20 20

Return Loss @6.0GHz dB – 20 15 15 22 17 15 15

P0.1 dB @2.5GHz dBm +20.5 @2GHz +29 +28 @3V +32 @5V – +28 – +31 +31 @3V

+35 @5V

P0.1 dB @2.5GHz @Vcont =1.8V dBm – – – – – – – –

P0.1dB @6.0GHz dBm – +29 +28 @3V +32 @5V – +28 – +31 +31 @3V

+35 @5V

P1dB @2.5GHz dBm +24 @2GHz +30.5 +31 +31 +28 +30.5 +35 +34

P1dB @6.0GHz dBm – +30.5 +31 +29 +30.5 +30.5 +35 +34

Input IP3 dBm – +50 +57 +55 +50 – +60 @20dBm +60 @20dBm

Harmonics 2nd dBc – – -80 @20dBm – – -80 @20dBm -80 @20dBm -80 @20dBm

Harmonics 3rd dBc – – -80 @20dBm – – -80 @20dBm -80 @20dBm -80 @20dBm

Control Current uA 4 0.1 0.1 0.1 0.1 0.1 0.1 0.1

Supply Current uA 50 – – – – – – –


Logic for “ON” HighLow – Low High Low High High High High

Package Size mm 1.5 x 1.3 x 0.55 1.0 x 1.0 x 0.37 1.5 x 1.3 x 0.55 1.5 x 1.5 x 0.37 1.0 x 1.0 x 0.37 1.2 x 2.0 x 0.37 1.5 x 1.5 x 0.37 1.5 x 1.3 x 0.55

Price Rank – Same as UPG2185T6R Same as UPG2411T6R Highest

Applications – General Purpose Dual Band WLAN Dual Band WLAN Dual Band WLAN Dual Band WLAN Dual Band WLAN Higher Power Dual Band WLAN

Higher Power Dual Band WLAN

Advantages –Low insertion loss, high isolation SPDT with single control

Low cost SPDT specified to 6GHz in

smallest package

Low cost SPDTspecified to 6GHz.

Alternative to UPG2185T6R

Low cost SPDT specified to 8GHz with high isolation and low

insertion loss

Alternative to UPG2185T6R with

specified control voltage at 1.8V and frequency

through 8GHz

Rectangular package option for

UPG2711T6R

Cost effective higher power switch for

WLAN Access Points

Alternative package option for

UPG2415T6X



6

Single Pole Double Throw (SPDT) Switches with 0.1 dB Compression Point > 2 Watts

RF Switch IC Guide

PARAMETERS UNITS UPG2155TB UPG2176T5N UPD5902T7K UPG2409T6X UPG2409TB UPG2009TB UPG2156TB

Frequency Range GHz 0.5 to 2.52.3 to 2.73.3 to 3.8

4.9 to 5.85 0.05 to 6.0 0.05 to 6.0 0.5 to 3.8 0.5 to 2.5 0.8 to 2.5

Vsupply V – – 2.3 to 3.3 – – – 2.4, 2.6, 5.0

Vcontrol V 2.4, 2.6, 5.0 2.5, 3.0, 5.0 1.3 to Vsupply 2.7, 3.0, 3.3 2.7, 3.0, 5.3 2.7, 2.8, 3.0 2.4, 2.6, 5.0

Number of Controls – 2 2 1 2 2 2 1

Insertion Loss @2.5Gz dB 0.45 0.45 0.45 0.45 0.45 0.40 0.5

Insertion Loss @6GHz dB – 0.70 0.60 0.65 – – –

Isolation @2.5GHz dB 17 27 35 30 26 25 16

Isolation @6GHz dB – 21 23 27 – – –

Return Loss @2.5GHz dB 20 15 18 20 20 20 20

Return Loss @6.0GHz dB – 15 15 15 – – –

P0.1dB dBm +37.5 – +38 +34 +33.5 +34 +37

P0.1dB @Vcont = 1.8V dBm – – +38 – – – –

P1dB @2.5GHz dBm – +37 – +36 +35 @3V +37 @5V – –

Input IP3 dBm – – +70 +60 +60 – –

Harmonics 2nd dBc -70 @31.5dBm – -85 @33dBm -70 @30dBm -75 @26dBm -75 @30.5dBm -70 @33dBm

Harmonics 3rd dBc -75 @31.5dBm – -80 @33dBm -70 @30dBm -80 @26dBm -75 @30.5dBm -75 @33dBm

Current Control uA 0.5 16 1 max 0.1 0.1 1 5

Supply Current uA – – 130 – – – 40

Switching Speed ns 1000 100 2000 100 100 150 1000

Logic for “On” HighLow High High – High High High –

Package Size mm 2.0 x 2.1 x 0.9 1.5 x 1.5 x 0.37 2.0 x 2.0 x 0.6 1.5 x 1.5 x 0.37 2.0 x 2.1 x 0.9 2.0 x 2.1 x 0.9 2.0 x 2.1 x 0.9

Price Rank – Lowest Same as UPG2409T6X Highest

Applications –General Purpose

including Mobilecomm and AMI

General Purpose including Dual Band WLAN Access Points and WiMAX

General Purpose including Mobilecom

and AMI

Dual Band WLAN Access Points and WiMAX

General Purpose including 2.4GHz WLAN

Access Points and WiMAX

General Purpose High Power including AMI

General Purpose including Mobilecomm

Advantages – Lowest cost for a high power SPDT

High power absorptive SPDT

specified to 5.85GHz

High power, low insertion loss, wideband SOI SPDT with single control down

to 1.3V. No blocking capacitors required. High ESD immunity

Higher power SPDT with low insertion loss and wide frequency range

Higher power SPDT alternative to the UPG2179TB with

frequency specified to 3.8GHz

Lowest insertion loss SPDT for high power

applications

High power SPDT alternative to the UPG2155TB with

single control


Note: All values listed are typical performance, unless otherwise listed.

7

RF Switch IC Guide

Single Pole Double Throw (SPDT) Absorptive Switches


PARAMERTERS UNITS UPG2418TB UPG2418T6X UPG2176T5N

Frequency Range GHz 0.5 to 3.0 0.5 to 3.02.3 to 2.73.3 to 3.8

4.9 to 5.85

Vcontrol V 2.5, 3.0, 5.3 2.5, 3.0, 3.3 2.5, 3.0, 5.0

Insertion Loss @2.5Gz dB 0.45 0.45 0.45

Insertion Loss @3.8GHz dB – – 0.55

Insertion Loss @5.85GHz dB – – 0.70

Isolation @2.5GHz dB 21 21 27

Isolation @3.8GHz dB – – 24

Isolation @5.85GHz dB – – 21

Return Loss @2.5GHz dB 20 20 15

Return Loss @6.0GHz dB – – 15

P0.1dB @2.5GHz dBm +29 +29 –

P0.1dB @6.0GHz dBm – – –

P1dB @2.5GHz dBm +32 +32 +37

P1dB @6.0GHz dBm – – +37

Input IP3 dBm +60 +60 –

Harmonics 2nd dBc – -75@20dBm –

Harmonics 3rd dBc – -75@20dBm –

Control Current uA 0.3 0.3 16

Switching Speed ns 50 50 100

Logic for “On” HighLow High High High

Package Size mm 2.0 x 2.1 x 0.9 1.5 x 1.5 x 0.37 1.5 x 1.5 x 0.37

Price Rank – Lowest Same as UPG2418TB Highest

Applications – General Purpose General Purpose General Purpose including Dual Band WLAN Access Points and WiMAX

Advantages – Lowest cost Smaller size alternative to the UPG2418TB SPDT with high power, high isolation and frequency operation to 5.85GHz


8

Single Pole Three Throw (SP3T) and Single Pole Four Throw (SP4T) Switches

RF Switch IC Guide

PARAMETERS UNITS UPG2430T6Z UPG2150T5L UPG2405T6Q UPG2413T6Z UPG2413T6M UPG2404T6Q UPD5904T7K UPD5731T6M

Function – SP3T SP3T SP3T SP3T SP3T SP3T SP4T SP4T

Frequency Range GHz 0.5 to 6.0 0.5 to 2.5 0.5 to 2.5 0.5 to 3.0 0.5 to 3.0 0.5 to 2.0 0.05 to 6.0 0.01 to 2.0

Vsupply V – – – – – – 2.3 to 3.3 1.5 to 3.6

Vcontrol V 1.6, 3.0, 3.6 2.3, 2.85, 3.6 2.7, 2.8, 3.0 1.8, 3.0, 3.6 1.8, 3.0, 3.6 2.7, 2.8, 3.0 1.3 to Vsupply 1.5, 2.8, 3.6

Insertion Loss @2.5Gz dB 0.55 0.50 WLAN0.60 BT 0.60 0.50 0.50 0.55 @2GHz 0.55 1.4 @2GHz

Insertion Loss @6GHz dB 0.65 – – – – – 0.75 –

Isolation @2.5GHz dB 28 18 WLAN35 BT 20 18 18 21 @2GHz 25 26 @2GHz

Isolation @6GHz dB 25 – – – – – 20 –

Return Loss @2.5 GHz dB 23 20 20 20 20 20 @2GHz 25 12 @2GHz

Return Loss @6.0GHz dB 23 – – – – – 17 –

P0.1dB @2.5GHz dBm +28 – +31 +28 +28 +33 @1GHz +38 +17 @1GHz

P0.1dB @6.0GHz dBm +28 – – – – – – –

P1dB @2.5GHz dBm +31 +31 WLAN +25 BT –

+27 @2.3V+31 @3V

+33 @3.6V

+27 @2.3V+31 @3V

+33 @3.6V – – +20 @1GHz

P1dB @6.0GHz dBm +31 – – – – – – –

Input IP3 dBm +53 – – – – – – –

Harmonics 2nd dBm -75@22dBm – -75@23dBm -75@23dBm -75@23dBm -75@27dBm -85 @33dBm –

Harmonics 3rd dBm -75@22dBm – -75@23dBm -75@23dBm -75@23dBm -75@27dBm -80 @33dBm –

Supply Current uA – – – – – – 130 0.01

Control Current uA 0.1 0.05 0.2 0.1 0.1 1 1 max 0.01


Package Size uA 1.5 x 1.5 x 0.36 2.0 x 2.0 x 0.37 2.0 x 1.35 x 0.37 1.5 x 1.5 x 0.37 2.0 x 2.0 x 0.37 2.0 x 1.35 x 0.37 2.0 x 2.0 x 0.6 2.0 x 2.0 x 0.37

Control Pins 3 3 3 3 3 3 2 2

Price Rank – Lowest Same as UPG2405T6Q

Same as UPG2405T6Q Highest

Applications – Combo Bluetooth / Dual Band WLAN

Combo Bluetooth / WLAN General Purpose Combo Bluetooth /

WLANCombo Bluetooth/

WLAN General PurposeGeneral Purpose

High Power Switch including Mobilecomm

General Purpose

Advantages –

Lowest cost and most popular SP3T;

specified frequency range to 6GHz

SP3T w/high isolation of one throw that is

typically used to isolate the Blutooth signal from the

WLAN signal

Higher power SP3T than the

UPG2430T6Z

SP3T alternative to the UPG2430T6Z

SP3T with alternative

package to the UPG2413T6Z

Higher power SP3T alternative to the

UPG2405T6Q

High power SOI SP4T with high linearity, wide frequency range, and 2-control decoder down to

1.3V. High ESD immunity

Low power, low frequency SOI SP4T with Integral Driver


Note: All values listed are typical performance, unless otherwise listed.

9

RF Switch IC Guide

Double Pole Double Throw (DPDT) Switches

PARAMETERS UNITS UPG2164T5N UPG2162T5N UPD5738T6N

Frequency Range GHz 2.4 to 2.54.9 to 6.0

2.4 to 2.54.9 to 6.0 0.01 to 2.5

Vcontrol V 2.8, 3.0, 5.0 2.8, 3.0, 5.0 1.5, 2.8, 3.6

Insertion Loss @2.5Gz dB 0.50 0.60 1.60

Insertion Loss @6GHz dB 0.70 0.85 –

Isolation @2.5GHz dB 25 35 15

Isolation @6GHz dBm 17 27 –

Return Loss @2.5GHz dBm 15 15 12

Return Loss @6.0GHz dB 15 15 –

P0.1dB @2.5GHz dBm – – 15

P0.1dB @6.0GHz dBm – – –

P1dB @2.5GHz dBm +31 +31 +20

P1dB @6.0GHz dBm +29 +29 –

Input IP3 dBm +50 +50 –

Control Current uA 0.1 0.1 0.01

Switching Speed ns 50 150 400

Package Size mm 1.5 x 1.5 x 0.37 1.5 x 1.5 x 0.37 1.5 x 1.5 x 0.37

Price Rank – Lowest Highest

Applications – Dual Band WLAN Dual Band WLAN General Purpose

Advantages – Lowest cost, low insertion Loss

High isolationalternative to UPG2164T5N

Good performance at low frequency



10

Special Function Switches for Antenna Tuning, TransferJet™ and FeliCa™

RF Switch IC Guide


PARAMETERS UNITS UPG2417T6M UPG2419T6R Switches for Antenna Tuning

Function GHz SPDT for TransferJet™ SP3T with selectable integrated capacitors for FeliCa™

Frequency Range GHz 2.4 to 6.0 13.56MHz

Vcontrol V 2.65, 3.0, 3.6 2.4, 2.85, 3.4

Insertion Loss @2.5Gz dB 0.45 (Ant to RX) @5.0GHz0.55 (Ant to TX) @5.0GHz 0.5 @13.56MHz

Isolation @2.5GHz dB 17 (Ant to RX) @5.0GHz26 (Ant to TX) @5.0GHz 50 @13.56MHz

Return Loss @2.5GHz dB 20 (Ant to RX) @5.0GHz20 (Ant to TX) @5.0GHz –

P0.1dB dBm +24 @5.0GHz +32 @13.56MHz

Control Current uA 0.1 2

Switching Speed ns 20 1000

Package Size mm 1.0 x 1.0 x 0.37 2.0 x 2.0 x 0.37

Applications – TransferJet™ FeliCa™/ NFC Mobilecomm smartphones and tablets

Advantages – Specialized low cost, small size switch with integral blocking capacitors for TransferJet™

Lowest cost specialized switch with selectable 1pF, 2pF, 4pF and 8pF series “tuning”capacitors

between RF In and RF Out for FeliCa™Improved performance for wideband antennas

New Digital Variable Capacitor (DVC) Switches

with up to 32 Capacitancestates are in development.

C1

C2

C3

C4

C5

FET1

FET2

RF+ RF-FET3

FET4

FET5

DecoderDC/DC Conv+Logic

GNDGND

GND

(TEST)

SCLK SDATA USID VIO VDD

11

Single Pole Multi Throw (SPnT) Antenna Switch Modules and ICs for Mobilecomm

RF Switch IC Guide

PARAMETERS UNITS UPG2332T7J UPG2333T7Q

Switch Description – SP10T GSM, UMTS/CDMA and LTE with integrated low pass filters for GSM Tx low and high bands

SP12T GSM, UMTS/CDMA and LTE with integrated low pass filters for GSM Tx low and high bands

Switch Type – SP10T with 6TRx/2Tx/2Rx SP12T with 7TRx/2Tx/3RxFrequency Range GHz 452MHz to 2690MHz 452MHz to 2690MHz

Current (Vdd=2.5V) uA 185 182Ins Loss @TxLB dB 1.33 1.20Ins Loss @TxHB dB 1.21 1.23

Ins Loss @TRxLB dB 0.47 0.55Ins Loss @TRxHB dB 0.84 0.79

Ins Loss @RxLB dB 0.65 0.80Ins Loss @RxHB dB 0.90 1.01Isolation @TxLB dB 33.1 44.1Isolation @TxHB dB 36.7 35.6

Isolation @TRx dB 22.4 23.5ATT @TxLB for

1648-1805MHz / 1805-1830MHz dB 34.7 32.2

ATT @TxLB for 2472-2745MHz dB 39.2 41.2ATT @TxHB for 3420-3820MHz dB 28.5 27.5ATT @TxHB for 5130-5730MHz dB 29.4 23.82nd Harmonic @TxLB @35dBm dBc -89.5 -89.83rd Harmonic @TxLB @35dBm dBc -93.6 -94.3

2nd Harmonic @TxHB @32dBm dBc -92.5 -95.33rd Harmonic @TxHB @32dBm dBc -92.5 -90.6

2nd Harmonic @Rx LB @26dBm dBc -87.5 -88.13rd Harmonic @Tx LB @26dBm dBc -105.0 -101.9

2nd Harmonic @TRx HB @26dBm dBc -88.0 -88.83rd Harmonic @Tx HB @26dBm dBc -107.0 -103.1

IMD2 @LB dBm -123 -128IMD3 @LB dBm -123 -117IMD2 @HB dBm -105 -106IMD3 @HB dBm -115 -116

Package Size mm 2.6 x 3.4 x 0.57 3.0 x 3.8 x 0.57

Application – Mobilecomm Antenna Switch Module with GSM/DCS Filters for GSM, UMTS/CDMA and LTE

Mobilecomm Antenna Switch Module with GSM/DCS Filters for GSM, UMTS/CDMA and LTE

Advantages – Drop-in to Competitor with improved linearity performance; No DC Blocking Capacitors required

Drop-in to Competitor with improved linearity performance; No DC Blocking Capacitors required

LPF

LPF

TRx1 TRx2 TRx3 TRx4 TRx5 TRx6 DCS/PCS-Tx GSM-Tx Rx1 Rx2

DC/DC Conv+Logic

LPF

TRx1 TRx2 TRx3 TRx4 TRx5 TRx6 TRx7 DCS/PCS-TxGSM-Tx Rx1 Rx2 Rx3

DC/DC Conv+Logic

LPF

Off-the-Shelf and Custom Solutions

Customize Your Antenna Switch?

Contact us about our custom SPnT Antenna Switch Module and IC Solutions (including Antenna Switch IC Die)


12

RF Switch IC Guide

Segment Switch Model Number Switch Type Page

General Low Band (2.4GHz) Only Wi-Fi

UPG2179TB SPDT 4

UPG2406T6R SPDT 4

UPG2406TK SPDT 4

Dual Band (2.4GHz + 5.8GHz) Wi-Fi

UPG2163T5N SPDT 5

UPG2422TK SPDT 5

UPG2185T6R SPDT 5

Dual Band Wi-Fi Access Points

UPG2415TK SPDT 5

UPG2415T6X SPDT 5

UPG2176T5N SPDT 6, 7

Combo Wi-Fi / Bluetooth UPG2430T6Z SP3T 8

Wi-Fi and Bluetooth Applications


High Power SPDTsUPD5902T7K SPDT 6

UPG2155TB SPDT 6

High Power SP4T UPD5904T7K SP4T 8

Antenna Switch ModulesUPG2332T7J SP10T 11

UPG2333T7Q SP12T 11

Mobilecom - GSM, CDMA, UMTS, LTE


General

UPG2179TB SPDT 4

UPG2155TB SPDT 6

UPD5902T7K SPDT 6

Advanced Metering Infrastructure (AMI) / Automatic Meter Reading (AMR)


General

UPG2179TB SPDT 4

UPG2406TK SPDT 4

UPG2406T6R SPDT 4

UPG2159T6R SPDT 4

UPG2155TB SPDT 6

UPD5902T7K SPDT 6

UPG2430T6Z SP3T 8

General Wireless


General

UPD5902T7K SPDT 6

UPG2405T6Q SP3T 8

UPG2404T6Q SP3T 8

Special Type for TransferjetTM UPG2419T6R SPDT 10

Special Type for FeliCaTM UPG2417T6M SP6T 10

Near Field Communication (NFC)

WLAN/ Wi-Fi

MobileComm

Bluetooth

General Purpose/Short Range Wireless

ZigBee/ 802.15.4AMR/AMI

What is your Application?

Most Widely Used Switch ICs by Application

13

Package Styles and Dimensions

RF Switch IC Guide

TB Package1.25 x 2.0 x 0.9Lead to Lead: 2.1 Lead to Lead: 1.3

T6Z Package1.5 x 1.5 x 0.37

T6Q Package1.35 x 2.0 x 0.37

T7C Package1.3 x 2.0 x 0.37

T7Q Package 3.0 x 3.8 x 0.57

T7J Package2.6 x 3.4 x 0.57

T5L, T6M Packages2.0 x 2.0 x 0.37

T6R Package1.0 x 1.0 x 0.37

T5N, T6N, T6X Packages1.5 x 1.5 x 0.37

TK Package1.1 x 1.5 x 0.55

2.0

0.37

1.3

2.0 2.0

0.37

1.5

0.37

1.5

1.5

0.37

1.5

1.01.0

0.37

2.0

0.37

1.35

1.11.3 1.5

0.55

2.0

0.9

1.252.1

3.0

0.57

3.82.6

0.57

3.4

T7K Package2.0 x 2.0 x 0.57

2.0 2.0

0.57

Top Bottom

Top Bottom

Top Bottom Top Bottom

Top Top

Top Bottom Top Bottom

Top Bottom

Top Bottom

Top Bottom

http://www.digikey.com?WT.z_cid=pdf_visitdigikey

U.S. SalesRepresentatives

CT / MA / ME / NH / RI / VTAnchor EngineeringTel: (508) 898-2724

WA / OR / ID / MT / WYDisman BaknerTel: (800) 347-3010

Southern CA - LA / OC / SDIn�nity SalesTel: (714) 669-8520

Upstate New YorkOntec SSITel: (585) 388-7870

North CarolinaRep OneTel: (919) 424-3814

South CarolinaRep OneTel: (704) 846-5744

GA / East TNRep OneTel: (770) 209-9242

AL / West TN / MSRep OneTel: (256) 539-7371

Southern FloridaRep OneTel: (561) 613-8342

Florida - OrlandoRep OneTel: (407) 952-9013

Florida - TampaRep OneTel: (813) 957-5293

IllinoisStan Clothier Co.Tel: (847) 781-4010

lowaStan Clothier Co.Tel: (319) 393-1576

KansasStan Clothier Co.Tel: (913) 894-1675

MN / ND / SDStan Clothier Co.Tel: (952) 944-3456

MissouriStan Clothier Co.Tel: (636) 916-3777

WisconsinStan Clothier Co.Tel: (608) 882-0686

Northern NJ / NYC / LIStrategic Sales Inc.Tel: (973) 808-5060

Southern NJ / East PA / DEStrategic Sales Inc.Tel: (856) 489-3883

MD / VA / WVStrategic Sales Inc.Tel: (410) 964-0097

Northern CA - Mountain ViewTAARCOMTel: (650) 960-1550

Colorado / UtahThorson Rocky MountainTel: (303) 773-6300

Indiana / KentuckyTMC Tel: (317) 844-8462

MichiganTMCTel: (248) 592-0814

Ohio / West PATMCTel: (513) 984-6720

TX / OK / AR / LATMITel: (972) 387-3601

Asia

IndiaInternational MarketingServicesTel: +(91) 80-2286-4005Fax: +(91) 80-2286-1979

SingaporeCEL Administrative O�ceTel: +(65) 6-560-3255

Eastern Canada

Ontario, Quebec, Maritime ProvincesAstec Components Ltd.Tel: (905) 607-1444

Western Canada

BC, Alberta, Saskatchewan, ManitobaDisman BaknerTel: (800) 347-3010

Mexico

Zapopan, JaliscoEverest Sales & SolutionsTel: +(52) 33-3123-0848

Naucalpan, EDO deMexicoEverest Sales & SolutionsTel: +(52) 55-5343-2064

Monterrey, Nuevo LeonEverest Sales & SolutionsTel: +52-1(811) 290-1290

Ciudad Juarez,ChihuahuaEverest Sales & SolutionsTel: +52-1(656) 199-7094

Tijuana, Baja CaliforniaEverest Sales & SolutionsTel: +52(664) 681-5509

South America

BrazilVLA SolutionsTel: +(55) 115-505-8011

Africa/Middle East

South AfricaRF DesignTel: 27 (0) 21-555-8400Fax: 27 (0) 21-555-8401

IsraelSemix Marketing & Engineering Ltd.Tel: +(972) 3-910-9910Fax: +(972) 3-903-2068

01.13/4M

CEL Regional Sales O�ces

CEL Headquarters

4590 Patrick Henry DriveSanta Clara, CA 95054Tel: (408) 919-2500Fax: (408) 988-0279

www.cel.com

CEL WestTel: (408) 919-2231Fax: (408) 538-9000

CEL SouthwestTel: (760) 217-5190Fax: (408) 538-9000

CEL CentralTel: (408) 919-2619Fax: (913) 273-0741

CEL SouthcentralTel: (408) 919-2619Fax: (913) 273-0741

CEL SoutheastTel: (408) 919-2618Fax: (410) 558-6765

CEL NortheastTel: (408) 919-2618Fax: (410) 558-6765

CEL InternationalTel: (408) 919-2615Fax: (908) 543-1013

CEL O�ce for Distribution PartnersTel: (408) 919-2500Fax: (408) 988-0279

Arrow Electronicsarrow.com

Avnet - Israelavnet-israel.com

Digi-Key Corporationdigikey.com

Future Electronicsfutureelectronics.com

Mouser Electronicsmouser.com

Nu Horizonsnuhorizons.com

© 2013 California Eastern Laboratories

Distributors

http://www.digikey.com?WT.z_cid=pdf_visitdigikey

RF Switch IC Guide

Documents