Page 1
1ARCON RING AND SPECIALTY CORPORATIONOver Thirty Years of Service ARCO
N
AR ON
ARCONN1300
14001308140814605560*15401500180051075304
T5304150113011401
N130214021440146514055590*5900*1305
ARCOND1300D1400D1500M1465
WALDESN5000
51005008510851605560*51445133510351075304
T53045131
N50015101
N500251025555511551055590*5900*5005
WALDESD1300D1400D1500M1465
I.R.R.300031004000410072005560*12001000200051075304
T5304100130013101
N500251027100511561005590*5900*5005
DIN472471
6799M1465
ROTOR CLIPHOSHHOISHISHRSHMREECLCPOPOLBE
BHOBSHVHOVSHSHFTXTY
not offerednot offered
TI
ROTOR CLIPDHODSHDEDTX
MILITARYSTANDARDMS16625**MS16624**MS16627**MS16626**MS 3217**
—MS 3215**MS16633**MS16632**MS90708**
——
MS16634**MS16629**MS16628**MS16631**MS16630**MS90707**
—————
SEEGERJA
RAZA
DIN METRIC RETAIN ING RINGS
RETAINING RING MANUFACTURERS CROSS REFERENCE BY SERIES
* Available on Special Order Only.
** Military Standard References have a four digit dash number.The first digit identifies the material and finish.The last three digits indicate the size of the ring.
eg:MS 16625 -1025=1300-25 CD (Carbon Steel, Cadmium Dichromate) (We no longer supply)2025=1300-25 ZD (Carbon Steel, Zinc Dichromate)3025=1300-25 PP (Carbon Steel, Standard Phosphate)4025=1300-25 AS (Stainless Steel, Passivate)5025=1300-25 C (Beryllium Copper)
Page 2
2 ARCO
N
AR ON ARCON RING AND SPECIALTY CORPORATIONOver Thirty Years of Service
CONTENTS - Stamped & Metric Rings
N1300pages 8 - 9
N1302page 10
1305page 11
1308page 11
1400pages 12 - 13
1405/1465page 14
1440/1460page 15
1500page 16
1540page 16
1800page 17
5304T5304page 18
D1500page 19
D1400pages 20 - 21
D1300pages 22 - 23
WA/AARpage 17
DIN6799 DIN471 DIN472
STANDARDINTERNAL
BEVELEDINTERNAL
PUSH-ONINTERNAL
BALANCED LUGINTERNAL
STANDARDEXTERNAL
PUSH-ON/HEAVYDUTY PUSH-ON
EXTERNAL
GRIP RING/ HEAVYDUTY GRIP RING
EXTERNAL
E-RING EXTERNAL
REINFORCEDE-RING EXTERNAL
C-RINGEXTERNAL
METRICEXTERNAL
METRICINTERNAL
CRIMP RING KLIPRING®EXTERNAL
METRIC “E”EXTERNAL
METRICCIRCLIPS
Page 3
3ARCO
N
AR ONARCON RING AND SPECIALTY CORPORATIONOver Thirty Years of Service
Wire / Specialty Rings - CONTENTS
ENpage 29
XANpages 30 - 31 pages 32 - 33
NANpages 34 - 35
INpages 36 - 37
pages 38 - 39 NDpage 40
TRCpage 28page 28
1200page 24
3200page 25
1000page 24
pages 6 - 7
PLIERSKITS
DISPENSERSAPPLICATORS
XRC-XROpage 26
XSC-XSOpage 27
pages 44 - 45
ROUNDSECTION
ROUND SECTIONEXTERNAL
INTERNALRETAINING
RINGS
PLAINWIRE RING
SQUARE SECTIONEXTERNAL
INTERNALNOTCHED
RINGS
BEARING SNAPRING
EXTERNALNOTCHED RINGS
INTERNALRETAINING RINGS
(METRIC)
SPIRALRINGS
EXTERNALRETAINING
RINGS
INTERNALRETAINING
RINGS
RECTANGULARSECTION
EXTERNAL
EXTERNALRETAINING
RINGS
SPRINGS/MISC
Page 4
MATERIALS AND FINISHES
Material Availability Interchangeability Code
Anderton Truarc IRR Rotor Clip
4 ARCO
N
AR ON ARCON RING AND SPECIALTY CORPORATIONOver Thirty Years of ServiceAR
CON
AR ON
Carbon Steel(SAE1060-1090)Austempered for maximumperformance. Maximum recommendedoperating temperatures for rings:480°F (300°F under severe stress).
Stainless Steel*PH 15-7 Mo (Armco)Precipitation hardened.Withstands all dilute non-acidicchemicals. The most effectivematerial for long term resistanceto industrial atmospheres.Maximum recommended operatingtemperatures for rings: 1000°F(850°F under severe stress).
Beryllium Copper*Alloy 25Precipitation hardened.Poor resistance to industrialatmospheres but widely used inmarine applications.Maximum recommended operatingtemperatures for rings: 660°F forlimited period of time.
S S ST ST
AS H SS2 SS2
BC C BC BC
All rings except1400 sizes 12 thru 231500 size 4Series 500 thru 1000(hard drawn carbon steel, workhardened and stress relieved)
N1300 sizes 25 thru 1501308 sizes 75 thru 1501400 sizes 25 thru 2001408 sizes 50 thru 2001440 all sizes1460 sizes 39 thru 661500 all sizes except 41501, 1540, 1800 all sizesOther series & sizes on application
N1300 sizes 25 thru 1501308 sizes 75 thru 1501400 sizes 12 thru 2001408 sizes 50 thru 2001440 all sizes1460 sizes 39 thru 661500, 1501, 1540, 1800 all sizesOther series & sizes on application
Phosphate
Bright Zinc*
Zinc Dichromate**
PP PP PA PA
ZP Z ZB ZF
ZD ZD ZD ZD
Zinc-based coating sealed with lanolin-based oil.Provides added shelf-life plus a measure of protection in corrosive environments. Used as thestandard finish for several PP series of rings.Coating weight in excess of 1000 mg/ft2.
Forms a barrier between the steel substrate andthe corrosive environment. It is preferentiallyattacked, forming sacrificial anodes in the circuitmade by its contact with the steel. Superior toCadmium in general industrial use and considerablyless expensive. Should not be used in conjunctionwith alkaline solutions, hot water or steam. Thoughnot as toxic as Cadmium, it is not recommended for usewhere prolonged contact with foodstuffs is involved.
Finish Suitability Interchangeability Code
Anderton Truarc IRR Rotor Clip
*Not all sizes in Stainless Steel and Beryllium Copper in stock — inquire for availability.
*Bright finish rings are clear passivated to improve resistance to finger stains and normal darkening during storage.**Dichromate is a post-plating process, improving corrosion resistance and restricting the formation of
“white rust” on Zinc plated surfaces under humid conditions. It has a yellowing effect on the finish.
Page 5
5ARCO
N
AR ONARCON RING AND SPECIALTY CORPORATIONOver Thirty Years of Service
THRUST LOAD CALCULATIONSSpecial MaterialsIf circlips or grooves are producedin materials other than thoseshown in the catalog, then thrustload figures must be adjustedaccordingly.
GrooveGroove materials may, in practice,vary considerably from ouraccepted norm of ‘MILD STEEL.’The adjacent table shows typicalfigures for other common materials.
Multiply the catalog figure byconversion factor to obtain themodified groove thrust capacity:Tg’=Tg × Cfg.
For intermediate materials,groove capacity may be obtainedby ratio method.i.e. Tc’=Tc × Y’ (Actual)
Y (Catalog)
CirclipConversion factors are listed in adjacenttable for special circlip materials.Multiply the catalog figure by conversionfactor to obtain modified thrust capacity:Tc’=Tc × Cfc.
Radiused, Chamfered AbutmentWhere possible, radiused or chamfered abutment should be avoided since theload bearing capacity will be significantly reduced.
If chamfered or radiused parts must be used, then the allowable thrust loadwill be reduced in proportion to the chamfer depth or radius.
The thrust load for a given corner break may be calculated as follows:
Tc=X.πE.t3In(1+2b—G )–––––––––––-
6.L2
Where:X=Acceptable component deflectionL=Ch+0.05mm OR 0.75R=0.05mmIn=Natural log.
Elastic Modulus:E=204100 N/mm2 for Carbon Spring Steel
Note that where there is a larger clearance between shaft/bore andretained part or a step in the shaft/bore, then these situations should betreated in the same way as the chamfered abutment.
Impact LoadingThe maximum acceptable impact load for a circlip assembly may be determined by the use of the following formula:
Circlip Groove Tc=Catalog thrust load circlip N (lb)Tci=Tc.t N.m.(ft.lb) Tgi=Tg.d N.m.(ft.lb) Tg=Catalog thrust load groove N (lb)
2 2 t=Circlip thickness converted to meters (feet)d=Groove depth converted to meters (feet)
Material Code ConversionFactor-Circlip
CfcStainless RS 0.95
AS 0.95SS 0.85
Beryllium Copper BC 0.6Phosphor Bronze PB 0.4
Ultimate Yield Strength Approx. ConversionGroove Tensile Hardness Factor-Material Strength BHN Groove
Kg/mm2 ib/in2 Kg/mm2 N/mm2 Cfg
Hardened Steel 125 145,000 100 980 360 3.25Mild Steel 47 45,000 31.5 300 125 1.0Cast Iron 32 32,000 22.5 220 85 0.73Brass (cold rolled) 47 60,000 43.0 420 125 1.4Brass (soft) 35 18,500 13.0 130 110 0.43Zinc Alloy 30 21,500 15.0 147 80 0.47Aluminum 20 18,000 12.7 125 65 0.42
Page 6
6 ARCO
N
AR ON ARCON RING AND SPECIALTY CORPORATIONOver Thirty Years of Service
KITS
DISPENSERS APPLICATORS
•Internal•External•E-Style•Metric
•Single Rod•Double Rod
•Straight Tip•45° Tip
CUSTOM PACKAGING,LABELING, & BARCODINGAVAILABLE UPON REQUEST
Page 7
7ARCO
N
AR ONARCON RING AND SPECIALTY CORPORATIONOver Thirty Years of Service
PLIERS
•Complete Line•Call for Info
FOR REMOVAL OF WIRE FORMED SNAP RINGS (EXTERNALLY APPLIED)
THESE PLIERS CONVERT FROM TO USE WITH THE PUSH OF TWO BUTTONS
Min. Gap Required.140" or 3.55 mm
Min. Gap Required.170" or 4.32 mm
ROUND,
SQUARE,
RECTANGULAR
MATERIAL
ROUND,
SQUARE,
RECTANGULAR
MATERIAL
WE STOCK:
• Fixed Tip Internal Pliers
• Fixed Tip External Pliers
• Fixed Tip Convertible Pliers
• E And C Ring Style Applicators
EXTERNALINTERNAL
1/8 " - 1"3mm - 25 mm
1/4 " - 2"10mm - 48 mm
1 1/2 " - 4"31mm - 100 mm
Ring Plier Set
ALL3 Sizes
withCaseandTips
6 optional tips(included)
5 optional tips(included)
5 optional tips(included)
Page 8
ARCO
N
AR ON ARCON RING AND SPECIALTY CORPORATIONOver Thirty Years of Service8
N1300
0.250” to 10.00”
Standard MaterialCarbon Spring Steel
Standard FinishPhosphate and oil
MS 16625
STANDARDINTERNAL
ARCO
N
AR ON
When Sprung into Bore When Sprung into Groove
BOREDIAMETER B
Frac. Dec. mminch inch
PARTNUMBER
RING THICKNESS FREE DIAMETER
t Tol. D Tol. C C1 L b hinches inches inches inches (max) ~ (min)
GROOVE DIAMETER WIDTH
G Tol. W Tol. ninches inches inches inches (min)
APPROX THRUST PLIER
WT. LB / LOAD NO.1000 (LBS)PCS.
N1300-25N1300-31N1300-37N1300-43N1300-45N1300-50N1300-51N1300-56N1300-62N1300-68N1300-75N1300-77N1300-81N1300-86N1300-87N1300-90N1300-93N1300-100N1300-102N1300-106N1300-112N1300-118N1300-118N1300-125N1300-125N1300-131N1300-137N1300-137N1300-143N1300-145N1300-150N1300-156N1300-156N1300-162N1300-165N1300-168N1300-175N1300-181N1300-185N1300-187N1300-193N1300-200N1300-206N1300-206N1300-212N1300-218N1300-218N1300-225N1300-231N1300-237N1300-244N1300-250N1300-250N1300-256N1300-262
1/45/163/87/1629/641/2
–9/165/8
11/163/4
–13/16
–7/8
–15/16
1
–11/16
11/8
–13/16
11/4
–15/16
13/8
–17/16
–11/2
19/16
–15/8
–111/16
13/4
113/16
–17/8
115/16
2–
21/16
21/8
–23/16
21/4
25/16
23/8
27/16
21/2
217/32
29/16
25/8
.250
.312
.375
.438
.453
.500
.512
.562
.625
.688
.750
.777
.812
.866
.875
.901
.9381.0001.0231.0621.1251.1811.1881.2501.2591.3121.3751.3781.4381.4561.5001.5621.5751.6251.6531.6881.7501.8121.8501.8751.9382.0002.0472.0622.1252.1652.1882.2502.3122.3752.4382.5002.5312.5622.625
––––––13–––19
19.7–22–
22.9––2627–30––32––35–37––40–42–––47–––52––55–––––––––
.015
.015
.025
.025
.025
.035
.035
.035
.035
.035
.035
.042
.042
.042
.042
.042
.042
.042
.042
.050
.050
.050
.050
.050
.050
.050
.050
.050
.050
.050
.050
.062
.062
.062
.062
.062
.062
.062
.062
.062
.062
.062
.078
.078
.078
.078
.078
.078
.078
.078
.078
.078
.078
.093
.093
±.002
±.003
.280
.346
.415
.482
.498
.548
.560
.620
.694
.763
.831
.859
.901
.961
.9711.0001.0411.1111.1361.1801.2491.3191.3191.3881.3881.4561.5261.5261.5961.6161.6601.7341.7341.8041.8351.8741.9422.0122.0542.0722.1412.2102.2802.2802.3502.4152.4152.4902.5602.6302.7022.7752.7752.8442.910
+.010-.005
+.015-.010
+.025-.020
+.035-.025
+.040-.030
.11
.17
.20
.23
.25
.26
.27
.28
.34
.40
.45
.48
.49
.54
.55
.57
.61
.67
.69
.69
.75
.79
.80
.87
.88
.93
.99
.991.061.081.121.141.151.151.171.231.261.321.341.371.441.501.521.541.581.611.641.691.751.811.861.911.941.952.02
.13
.19
.22
.25
.27
.29
.30
.32
.39
.45
.50
.52
.53
.59
.60
.63
.67
.74
.76
.75
.82
.86
.87
.96
.971.011.071.071.151.171.211.231.241.251.271.331.361.431.451.481.561.621.641.661.701.741.771.821.881.952.002.052.092.102.17
.068
.069
.085
.101
.101
.117
.119
.137
.137
.137
.147
.151
.160
.160
.160
.160
.160
.160
.160
.185
.185
.185
.185
.185
.185
.185
.185
.185
.185
.185
.185
.205
.205
.205
.205
.205
.205
.205
.205
.205
.205
.205
.225
.225
.236
.236
.236
.236
.236
.236
.236
.236
.236
.268
.268
.025
.033
.040
.049
.050
.053
.053
.053
.060
.063
.070
.074
.077
.081
.084
.087
.091
.104
.106
.110
.116
.120
.120
.124
.124
.130
.130
.130
.133
.133
.133
.157
.157
.160
.167
.170
.175
.170
.170
.170
.165
.170
.186
.186
.195
.199
.199
.203
.205
.207
.205
.210
.210
.222
.226
.029
.029
.039
.039
.045
.045
.045
.045
.060
.060
.060
.060
.060
.060
.060
.060
.060
.060
.060
.076
.076
.076
.076
.076
.076
.076
.076
.076
.076
.076
.076
.076
.076
.076
.076
.076
.076
.091
.091
.091
.091
.091
.091
.091
.091
.091
.091
.091
.091
.091
.108
.108
.108
.108
.108
.268
.330
.397
.461
.477
.530
.542
.596
.665
.732
.796
.825
.862
.920
.931
.9591.0001.0661.0911.1301.1971.2551.2621.3301.3391.3961.4611.4641.5281.5481.5941.6581.6711.7251.7551.7921.8581.9221.9621.9892.0562.1222.1712.1862.2512.2952.3182.3822.4502.5172.5842.6482.6812.7142.781
±.001
±.002
±.003
±.004
±.005
±.006
.018
.018
.029
.029
.029
.039
.039
.039
.039
.039
.039
.046
.046
.046
.046
.046
.046
.046
.046
.056
.056
.056
.056
.056
.056
.056
.056
.056
.056
.056
.056
.068
.068
.068
.068
.068
.068
.068
.068
.068
.068
.068
.086
.086
.086
.086
.086
.086
.086
.086
.086
.086
.086
.103
.103
+.002-.000
+.003-.000
+.004-.000
+.005-.000
.027
.027
.033
.036
.036
.045
.045
.051
.060
.066
.069
.072
.075
.081
.084
.087
.093
.099
.102
.102
.108
.111
.111
.120
.120
.126
.129
.129
.135
.138
.141
.144
.144
.150
.153
.156
.162
.165
.168
.171
.177
.183
.186
.186
.189
.195
.195
.198
.207
.213
.216
.222
.222
.228
.234
.08
.11
.25
.37
.43
.70
.77
.861.01.21.31.71.92.02.12.22.42.72.83.74.04.34.44.84.85.05.15.15.86.46.58.98.910.010.410.810.311.512.812.813.314.018.018.019.419.619.621.822.623.225.425.525.534.034.5
420520
10501220128019802030222024602690300045504800510051505350560060006050750079008400840088008800930097009700
102001030010550137001370014200145001480015300159001620016450170001750022700227502340024100242002485025400261502690027600276503370034500
Std.1
Std.3
Std.5
Page 9
9
N1300
0.250” to 10.00”
Standard MaterialCarbon Spring Steel
Standard FinishPhosphate and oil
MS 16625
STANDARDINTERNAL
ARCO
N
AR ONARCON RING AND SPECIALTY CORPORATIONOver Thirty Years of Service
N1300-268N1300-268N1300-275N1300-281N1300-281N1300-287N1300-300N1300-300N1300-306N1300-312N1300-315N1300-315N1300-325N1300-334N1300-347N1300-350N1300-354N1300-354N1300-362N1300-375N1300-375N1300-387N1300-393N1300-400N1300-412N1300-425N1300-433N1300-450N1300-462N1300-475N1300-475N1300-500N1300-525N1300-537N1300-550N1300-575N1300-600N1300-625N1300-650N1300-662N1300-675N1300-700N1300-725N1300-750N1300-775N1300-800N1300-825N1300-850N1300-875N1300-900N1300-925N1300-950N1300-975N1300-1000
–211/16
23/4
213/16
–27/8
–3
31/16
31/8
–35/32
31/4
311/32
315/32
31/2
–39/16
35/8
–33/4
37/8
315/16
441/8
41/4
–41/2
45/8
–43/4
551/4
53/8
51/2
53/4
661/4
61/2
65/8
63/4
771/4
71/2
73/4
881/4
81/2
83/4
991/4
91/2
93/4
10
2.6772.6882.7502.8122.8352.8752.9533.0003.0623.1253.1503.1563.2503.3463.4693.5003.5433.5623.6253.7403.7503.8753.9384.0004.1254.2504.3314.5004.6254.7244.7505.0005.2505.3755.5005.7506.0006.2506.5006.6256.7507.0007.2507.5007.7508.0008.2508.5008.7509.0009.2509.5009.750
10.000
68–––
72–
75–––
80–––––
90––
95––––––
110––
120–
127–––
146––
165–––––––––––
235–––
.093
.093
.093
.093
.093
.093
.093
.093
.109
.109
.109
.109
.109
.109
.109
.109
.109
.109
.109
.109
.109
.109
.109
.109
.109
.109
.109
.109
.109
.109
.109
.109
.125
.125
.125
.125
.125
.156
.156
.156
.156
.156
.187
.187
.187
.187
.187
.187
.187
.187
.187
.187
.187
.187
±.003
±.004
±.005
2.9802.9803.0503.1213.1213.1913.3253.3253.4183.4883.5233.5233.6233.7343.8573.8903.9363.9364.0244.1574.1574.2914.3584.4244.5584.6914.7564.9405.0765.2135.2135.4855.7705.9106.0666.3366.6206.8957.1707.3087.4457.7207.9958.2708.5458.8209.0959.2859.5589.830
10.10210.37510.64810.920
+.040-.030
±.055
±.065
±.080
±.090
2.052.062.122.182.212.222.302.352.412.472.492.502.542.632.762.792.832.852.913.023.033.113.173.233.363.483.503.663.793.883.904.084.314.414.534.785.035.245.495.605.655.886.086.336.586.757.007.137.387.637.887.988.238.48
2.212.222.282.342.382.392.482.532.592.662.682.692.732.832.963.003.043.063.123.243.253.343.403.473.603.723.743.904.034.124.144.344.584.684.805.055.305.525.785.905.956.196.406.676.937.117.377.517.778.038.308.418.678.93
.268
.268
.284
.284
.284
.284
.284
.284
.299
.299
.299
.299
.299
.323
.350
.350
.350
.350
.350
.350
.350
.350
.350
.378
.378
.378
.413
.413
.413
.413
.413
.445
.465
.465
.465
.465
.465
.454
.454
.454
.508
.540
.570
.570
.560
.600
.600
.632
.632
.632
.632
.632NoLug
.236
.236
.234
.230
.230
.240
.250
.250
.254
.260
.260
.260
.269
.276
.294
.294
.292
.292
.305
.309
.309
.312
.319
.330
.330
.335
.338
.351
.350
.358
.358
.385
.408
.408
.408
.408
.416
.441
.441
.441
.456
.474
.490
.507
.500
.530
.548
.573
.576
.592
.622
.622
.622
.622
.108
.108
.108
.108
.108
.108
.108
.108
.123
.123
.123
.123
.123
.123
.123
.123
.123
.123
.123
.123
.123
.123
.123
.123
.123
.123
.151
.151
.151
.151
.151
.151
.151
.151
.151
.151
.151
.182
.182
.182
.182
.182
.182
.182
.182
.182
.182
.182
.182
.182
.182
.182
.182
.182
2.8372.8482.9142.9803.0063.0513.1353.1823.2483.3153.3413.3483.4463.5463.6753.7103.7553.7763.8413.9643.9744.1074.1744.2404.3654.4904.5714.7404.8654.9694.9955.2605.5205.6505.7706.0206.2706.5306.7906.9257.0557.3157.5757.8408.1008.3608.6208.8809.1459.4059.6689.930
10.19010.450
±.006
±.007
±.008
.103
.103
.103
.103
.103
.103
.103
.103
.120
.120
.120
.120
.120
.120
.120
.120
.120
.120
.120
.120
.120
.120
.120
.120
.120
.120
.120
.120
.120
.120
.120
.120
.139
.139
.139
.139
.139
.174
.174
.174
.174
.174
.209
.209
.209
.209
.209
.209
.209
.209
.209
.209
.209
.209
+.005-.000
+.006-.000
+.008-.000
.240
.240
.246
.252
.252
.264
.273
.273
.279
.285
.288
.288
.294
.300
.309
.315
.321
.321
.324
.336
.336
.348
.354
.360
.360
.360
.360
.360
.360
.366
.366
.405
.405
.405
.405
.405
.405
.420
.435
.450
.456
.471
.486
.510
.525
.540
.555
.570
.591
.606
.627
.645
.660
.675
35.035.035.536.036.041.042.542.553.056.057.057.060.065.069.071.072.072.073.078.078.087.088.093.097.0
101.0105.0111.0117.0124.0124.0136.0174.0179.0183.0192.0201.0266.0281.0305.0325.0344.0428.0485.0520.0555.0603.0634.0653.0732.0767.0803.0833.0863.0
3540035400361003690036950378003950039500471004800048600486005000051600534005390054600546505590057700577005960060700617006360065500666006930071300732007320077000927009490097200
101600105900137700143300146000148800154000191500198200204800211400218000224600230400237800244000251000257600264200
Std. 5
Major77
BOREDIAMETER B
Frac. Dec. mminch inch
PARTNUMBER
RING THICKNESS FREE DIAMETER
t Tol. D Tol. C C1 L b hinches inches inches inches (max) ~ (min)
GROOVE DIAMETER WIDTH
G Tol. W Tol. ninches inches inches inches (min)
APPROX THRUST PLIER
WT. LB / LOAD NO.1000 (LBS)PCS.
When Sprung into Bore When Sprung into Groove
Page 10
ARCON RING AND SPECIALTY CORPORATIONOver Thirty Years of Service10
N1302
1.00” to 10.00”
Standard MaterialCarbon Spring Steel
Standard FinishPhosphate and oil
MS 16631
BEVELEDINTERNAL
E = Maximum end play take up capability† Thrust load calculations see page 5
BOREDIAMETER B
Frac. Dec. inchinch
PARTNUMBER
RING THICKNESS FREE DIAMETER
t Tol. D Tol. C C1 L b Einches inches inches inches (max) ~
GROOVE DIAMETER WIDTH
G Tol. W Tol. dinches inches inches inches
Tc † Tg †(lb.f) (lb.f)
Sizes up to 10” available
When Sprung into Bore When Sprung into Groove
ARCO
N
AR ON
N1302-100N1302-102N1302-106N1302-112N1302-118N1302-118N1302-125N1302-125N1302-131N1302-137N1302-137N1302-143N1302-145N1302-150N1302-156N1302-156N1302-162N1302-165N1302-168N1302-175N1302-181N1302-185N1302-187N1302-193N1302-200N1302-206N1302-212N1302-218N1302-225N1302-231N1302-237N1302-244N1302-250N1302-256N1302-262N1302-268N1302-275N1302-281N1302-287N1302-300N1302-306N1302-312N1302-315N1302-325N1302-334N1302-347N1302-350N1302-354N1302-362N1302-375N1302-387N1302-393N1302-400
1–
11/16
11/8
–13/16
114
–1516
13/8
–17/16
–11/2
19/16
–158
–111/16
13/4
113/16
–17/8
115/16
221/16
21/8
23/16
21/4
25/16
23/8
27/16
21/2
29/16
25/8
211/16
23/4
213/16
27/8
331/16
31/8
35/32
31/4
311/32
315/32
31/2
39/16
35/8
33/4
37/8
315/16
4
1.0001.0231.0621.1251.1811.1881.2501.2591.3121.3751.3781.4381.4561.5001.5621.5751.6251.6531.6881.7501.8121.8501.8751.9382.0002.0622.1252.1882.2502.3122.3752.4402.5002.5622.6252.6882.7502.8122.8753.0003.0623.1253.1563.2503.3463.4693.5003.5433.6253.7503.8753.9384.000
.042
.042
.050
.050
.050
.050
.050
.050
.050
.050
.050
.050
.050
.050
.062
.062
.062
.062
.062
.062
.062
.062
.062
.062
.062
.078
.078
.078
.078
.078
.078
.078
.078
.093
.093
.093
.093
.093
.093
.093
.109
.109
.109
.109
.109
.109
.109
.109
.109
.109
.109
.109
.109
±.002
±.003
1.1111.1361.1801.2491.3191.3191.3881.3881.4561.5261.5261.5961.6161.6601.7341.7341.8041.8351.8741.9422.0122.0542.0722.1412.2102.2802.3502.4152.4902.5602.6302.7022.7752.8442.9102.9803.0503.1213.1913.3253.4183.4883.5233.6233.7343.8573.8903.9364.0244.1574.2914.3584.424
+.015-.010
+.025-.020
+.035-.025
+.040-.030
±.055
.665
.69
.685
.745
.79
.80
.875
.885
.93
.99
.991.061.081.121.101.111.161.171.231.261.321.351.371.441.501.541.581.641.691.751.811.861.911.952.022.062.122.182.222.352.412.472.502.542.632.762.792.852.913.033.113.173.23
.70
.725
.72
.78
.83
.835
.92
.93
.971.031.031.111.131.171.151.161.221.221.291.311.381.421.441.511.571.611.651.721.771.821.891.942.002.042.112.162.212.272.322.462.512.582.612.652.742.882.912.973.033.173.253.313.37
.155
.155
.180
.180
.180
.180
.180
.180
.180
.180
.180
.180
.180
.180
.220
.220
.220
.227
.220
.240
.240
.240
.240
.240
.240
.250
.260
.260
.270
.270
.270
.280
.280
.290
.290
.300
.300
.300
.310
.310
.310
.310
.310
.342
.342
.342
.342
.342
.342
.342
.370
.370
.370
.104
.106
.110
.116
.120
.120
.124
.124
.130
.130
.130
.133
.133
.133
.157
.157
.164
.167
.170
.171
.170
.170
.170
.170
.170
.186
.195
.199
.203
.209
.207
.209
.210
.210
.222
.226
.230
.234
.230
.250
.254
.259
.262
.269
.276
.286
.289
.292
.299
.309
.319
.324
.330
.005
.005
.005
.005
.005
.005
.006
.006
.006
.006
.006
.007
.007
.007
.007
.007
.008
.008
.008
.008
.009
.009
.009
.009
.009
.009
.010
.010
.010
.011
.011
.012
.012
.012
.013
.013
.014
.014
.014
.015
.015
.015
.015
.016
.016
.017
.017
.018
.018
.019
.020
.020
.020
1.0761.1011.1381.2051.2651.2721.3421.3511.4081.4751.4781.5421.5621.6041.6741.6871.7431.7731.8101.8781.9441.9842.0112.0822.1442.2102.2792.3502.4202.4842.5522.6182.6842.7502.8202.8872.9553.0203.0853.2253.2903.3553.3883.4893.5913.7263.7603.8063.9004.0404.1714.2364.302
+.003-.000
+.004-.000
+.005-.000
+.006-.000
.036
.036
.044
.043
.043
.043
.042
.042
.042
.041
.041
.040
.040
.040
.052
.052
.051
.051
.050
.050
.050
.050
.050
.049
.048
.065
.065
.064
.064
.063
.063
.062
.062
.078
.077
.077
.076
.076
.076
.074
.089
.089
.089
.089
.089
.089
.089
.089
.089
.089
.089
.089
.089
+.001-.000
+.0015-.000
+.002-.000
.038
.039
.038
.040
.042
.042
.046
.046
.048
.050
.050
.052
.053
.052
.056
.056
.059
.060
.061
.064
.066
.067
.068
.072
.072
.074
.077
.081
.085
.086
.089
.089
.092
.094
.097
.099
.102
.104
.105
.112
.114
.115
.116
.119
.122
.128
.130
.134
.137
.145
.148
.149
.151
60396141756280198526852689328932944098469846
103531045510708114001140011800120001230012700132001350013700141001460018900195002010020700212002180022400230002800028700294003010030800315003280039300401004050041700429004450044900457004650048100497005050051300
1600170017001900210021002400240026502900290031003250330025602560280029003010326034803610371040504180449048005200560058206110635067107020742077508160851087809750
10100104001060011200118001280013200138001430015700165001690017400
Page 11
ARCON RING AND SPECIALTY CORPORATIONOver Thirty Years of Service 11
1305
0.311” to 2.002”
Standard MaterialCarbon Spring Steel
Standard FinishPhosphate and oil
“PUSH-ON”INTERNAL
0.625” to 1.562”
Standard MaterialCarbon Spring Steel
Standard FinishPhosphate and oil
MS 16627
BALANCEDLUG
INTERNAL
N1308-62N1308-75N1308-81N1308-87N1308-93N1308-100N1308-106N1308-112N1308-118N1308-125N1308-131N1308-137N1308-143N1308-150N1308-156
5/83/4
13/167/8
15/16
111/16
11/8
13/16
11/4
15/16
13/8
17/16
11/2
1916
.625
.750
.812
.875
.9381.0001.0621.1251.1881.2501.3121.3751.4381.5001.562
.025
.035
.042
.042
.042
.042
.050
.050
.050
.050
.050
.050
.050
.050
.062
±.002
±.003
.675
.808
.877
.9441.0151.0811.1501.2171.2831.3511.4181.4861.5521.6221.688
+.010-.005
+.015-.010
+.020-.013
.54
.63
.69
.75
.81
.85
.91
.971.031.101.151.221.261.321.37
.47
.56
.61
.66
.70
.75
.80
.85
.91
.961.021.081.131.181.22
.51
.61
.66
.72
.77
.83
.87
.93
.991.061.121.171.241.281.32
.076.089.097.104.111.118.126.129.132.135.138.141.150.154.165
.072.085.092.099.106.113.120.123.126.129.132.135.144.148.158
.028
.040
.040
.040
.040
.040
.048
.048
.048
.048
.048
.048
.074
.074
.074
.665
.796
.862
.9311.0001.0661.1301.1971.2621.3301.3961.4611.5281.5941.658
±.002
±.003
±.004
.029
.039
.046
.046
.046
.046
.056
.056
.056
.056
.056
.056
.056
.056
.068
+.003-.000
+.004-.000
.060
.070
.075
.085
.095
.100
.100
.110
.110
.120
.125
.130
.135
.140
.145
.020
.023
.025
.028
.031
.033
.034
.036
.037
.040
.042
.043
.045
.047
.048
110018502410260027802970375039804200441046404860508053005700
353201574693820933
102011401240141015601670183019902120
1308
BOREDIAMETER B
min. max. fraction(inch) (inch) ~
PARTNUMBER
RINGINSIDE DIAMETER THICKNESS
D1 Tol. t Tol. n1inches inches inches inches (min)
APPROX TC+WT. LB / (lb.f)
1000PCS.
.311
.374
.437
.498
.560
.623
.748
.873
.936
.313
.376
.439
.502
.564
.627
.752
.877
.940
5/163/87/161/29/165/83/47/8
15/16
.136
.175
.237
.258
.312
.390
.500
.625
.687
±.005
±.010
.010
.010
.010
.010
.010
.010
.015
.015
.015
±.001
±.002
.040
.040
.040
.040
.040
.040
.060
.060
.060
0.110.150.200.240.290.310.620.750.86
807570605045757070
1305-311305-371305-431305-501305-561305-621305-751305-871305-93
When Sprung into Bore When Sprung into Groove
† Thrust load calculations see page 5
† Thrust load calculations see page 5
ARCO
N
AR ON
APPROX TC+WT. LB / (lb.f)
1000PCS.
RINGINSIDE DIAMETER THICKNESS
D1 Tol. t Tol. n1inches inches inches inches (min)
BOREDIAMETER B
min. max. fraction(inch) (inch) ~
PARTNUMBER
1305-1001305-1121305-1251305-1431305-1501305-1751305-200
.9981.1231.2481.4351.4981.7481.998
1.0021.1271.2521.4391.5021.7522.002
111/8
11/4
17/16
11/2
13/4
2
.750
.813
.9381.1251.1881.4381.600
±.010
.015
.015
.015
.015
.015
.015
.015
±.002
.060
.060
.060
.060
.060
.060
.060
0.901.301.501.691.802.092.99
75606060605555
BOREDIAMETER B
Frac. Dec.inch inch
PARTNUMBER
RING THICKNESS FREE DIAMETER
t Tol. D Tol. D1 C C1 L b hinches inches inches inches (max) ~ (min)
GROOVE DIAMETER WIDTH
G Tol. W Tol. n dinches inches inches inches (min) ~
Tc Tg(lb.f) (lb.f)
Page 12
12
1400
0.125” to 10.00”
Standard Material12 to 23 Beryllium Copper25 up Carbon Spring Steel
Standard Finish12 to 23 Self Finish25 up Phosphate
MS 16624
STANDARDEXTERNAL
ARCON RING AND SPECIALTY CORPORATIONOver Thirty Years of ServiceAR
CON
AR ON
1400-121400-151400-181400-191400-211400-231400-251400-271400-281400-311400-341400-351400-371400-391400-401400-431400-461400-501400-551400-561400-591400-621400-661400-661400-681400-751400-781400-811400-871400-931400-981400-1001400-1021400-1061400-1121400-1181400-1251400-1311400-1371400-1431400-1501400-1561400-1621400-1681400-1751400-1771400-1811400-1871400-196
1/85/323/16
–7/3215/641/4
–9/325/1611/32
–3/8
–13/327/1615/321/2
–9/16
19/325/8
–43/6411/163/4
25/3213/167/8
15/1663/64
1–
11/16
11/8
13/16
11/4
15/16
13/8
17/16
11/2
19/16
15/8
111/16
13/4
–113/16
17/8
–
.125
.156
.188
.197
.219
.236
.250
.276
.281
.312
.344
.354
.375
.394
.406
.438
.469
.500
.551
.562
.594
.625
.669
.672
.688
.750
.781
.812
.875
.938
.9841.0001.0231.0621.1251.1181.2501.3121.3751.4381.5001.5621.6251.6881.7501.7721.8121.8751.968
–––5–––7–––9–10––––14–––17–––––––25–26––––––––––––45––50
.010
.010
.015
.015
.015
.015
.025
.025
.025
.025
.025
.025
.025
.025
.025
.025
.025
.035
.035
.035
.035
.035
.035
.035
.042
.042
.042
.042
.042
.042
.042
.042
.042
.050
.050
.050
.050
.050
.050
.050
.050
.062
.062
.062
.062
.062
.062
.062
.062
±.001
±.002
±.003
.112
.142
.168
.179
.196
.215
.225
.250
.256
.281
.309
.320
.338
.354
.366
.395
.428
.461
.509
.521
.550
.579
.621
.621
.635
.693
.722
.751
.810
.867
.910
.925
.946
.9821.0411.0981.1561.2141.2721.3331.3871.4461.5031.5601.6181.6371.6751.7351.819
+.002-.004
+.002-.005
+.005-.010
+.010-.015
+.013-.020
.222
.270
.298
.319
.338
.355
.45
.48
.49
.54
.57
.59
.61
.62
.63
.66
.68
.77
.81
.82
.86
.90
.93
.931.011.091.121.151.211.341.391.411.431.501.551.611.691.751.801.871.992.102.172.242.312.332.382.442.54
.214
.260
.286
.307
.324
.341
.43
.46
.47
.52
.55
.57
.59
.60
.61
.64
.66
.74
.78
.79
.83
.87
.89
.89
.971.051.081.101.161.291.341.351.371.441.491.541.621.671.721.791.902.012.082.152.212.232.282.342.43
.048
.056
.052
.058
.058
.058
.083
.084
.083
.090
.090
.090
.091
.090
.090
.091
.091
.111
.111
.111
.112
.113
.113
.113
.140
.140
.140
.140
.141
.170
.171
.171
.172
.185
.186
.186
.187
.187
.188
.188
.210
.189
.239
.205
.205
.205
.205
.205
.205
.018
.026
.025
.026
.028
.030
.035
.035
.038
.040
.042
.046
.050
.052
.054
.055
.060
.065
.053
.072
.076
.080
.082
.082
.084
.092
.094
.096
.104
.110
.114
.116
.118
.122
.128
.132
.140
.146
.152
.160
.168
.180
.180
.197
.197
.197
.197
.197
.197
.024
.024
.023
.024
.024
.024
.039
.039
.039
.039
.039
.039
.039
.039
.039
.039
.039
.045
.045
.045
.045
.045
.045
.045
.050
.050
.050
.050
.050
.076
.076
.076
.076
.076
.076
.076
.076
.076
.076
.076
.118
.123
.123
.123
.123
.123
.123
.123
.123
.117
.146
.175
.185
.205
.222
.230
.255
.261
.290
.321
.330
.352
.369
.382
.412
.443
.468
.519
.530
.559
.588
.629
.631
.646
.704
.733
.762
.821
.882
.926
.940
.961
.9981.0591.1181.1761.2321.2911.3501.4061.4681.5291.5891.6501.6691.7081.7691.857
±.0015
±.002
±.003
±.004
±.005
±.006
.012
.012
.018
.018
.018
.018
.029
.029
.029
.029
.029
.029
.029
.029
.029
.029
.029
.039
.039
.039
.039
.039
.039
.039
.046
.046
.046
.046
.046
.046
.046
.046
.046
.056
.056
.056
.056
.056
.056
.056
.056
.068
.068
.068
.068
.068
.068
.068
.068
+.002-.000
+.003-.000
+.004-.000
.014
.017
.022
.020
.023
.023
.032
.035
.033
.036
.038
.038
.038
.041
.039
.042
.042
.051
.051
.051
.057
.060
.066
.066
.068
.074
.076
.080
.085
.088
.091
.094
.097
.102
.105
.111
.117
.126
.132
.138
.147
.148
.151
.156
.157
.162
.163
.166
.174
.018
.037
.059
.063
.074
.086
.21
.23
.24
.27
.31
.35
.39
.42
.43
.50
.54
.91
.901.11.21.31.41.41.82.12.22.52.83.13.53.63.94.85.15.65.96.87.28.19.0
12.413.214.815.315.416.217.318.0
110130240250280310700770785940960990
10501100118012201300198021802220235024602650265040504420460048005150560058006000605075007900840088009300970010200105501370014200148001530015500158501640016900
MiniA
MiniB
Std. 2
Std. 4
Std. 6
When Sprung onto Shaft When Sprung into Groove
SHAFTDIAMETER S
Frac. Dec. mminch inch
PARTNUMBER
RING THICKNESS FREE DIAMETER
t Tol. D Tol. C C1 L b hinches inches inches inches (max) ~ (min)
GROOVE DIAMETER WIDTH
G Tol. W Tol. ninches inches inches inches (min)
APPROX THRUST PLIER
WT. LB / LOAD NO.1000 (LBS)PCS.
Page 13
13
1400
0.125” to 10.00”
Standard Material12 to 23 Beryllium Copper25 up Carbon Spring Steel
Standard Finish12 to 23 Self Finish
25 up Phosphate
MS 16624
STANDARDEXTERNAL
ARCON RING AND SPECIALTY CORPORATIONOver Thirty Years of Service
1400-2001400-2061400-2121400-2151400-2251400-2311400-2371400-2431400-2501400-2551400-2621400-2681400-2751400-2871400-2931400-3001400-3061400-3121400-3151400-3251400-3341400-3431400-3501400-3541400-3621400-3681400-3751400-3871400-3931400-4001400-4251400-4371400-4501400-4751400-5001400-5251400-5501400-5751400-6001400-6251400-6501400-6751400-7001400-7501400-8001400-8501400-9001400-9501400-1000
221/16
21/8
25/32
21/4
25/16
23/8
27/16
21/2
–25/8
211/16
23/4
27/8
215/16
331/16
31/8
35/32
31/4
311/32
37/16
31/2
–35/8
311/16
33/4
37/8
315/16
441/4
43/8
41/2
43/4
551/4
51/2
53/4
661/4
61/2
63/4
771/2
881/2
991/2
10
2.0002.0622.1252.1562.2502.3122.3752.4382.5002.5592.6252.6882.7502.8752.9383.0003.0623.1253.1563.2503.3463.4383.5003.5433.6253.6883.7503.8753.9384.0004.2504.3754.5004.7505.0005.2505.5005.7506.0006.2506.5006.7507.0007.5008.0008.5009.0009.500
10.000
–––––––––
65––––––––––
85––
90––––
100–––––
127–––––––––––––
254
.062
.078
.078
.078
.078
.078
.078
.078
.078
.078
.078
.078
.093
.093
.093
.093
.093
.093
.093
.093
.093
.093
.109
.109
.109
.109
.109
.109
.109
.109
.109
.109
.109
.109
.109
.125
.125
.125
.125
.156
.156
.156
.156
.187
.187
.187
.187
.187
.187
±.003
±.004
±.005
1.8501.9061.9641.9932.0812.1392.1972.2552.3132.3772.4282.4852.5432.6592.7172.7752.8322.8922.9203.0063.0923.1793.2373.2773.3523.4103.4683.5843.6423.7003.9894.1064.2234.4584.6924.9275.1625.3965.6315.8666.1006.3356.5707.0097.4787.9478.4158.8859.355
+.013-.020
+.015-.025
+.020-.030
+.020-.040
+.020-.030
+.020-.030
2.552.682.752.782.872.943.013.073.123.183.253.323.453.573.643.693.743.823.853.954.044.144.254.294.374.434.504.604.704.785.095.225.375.675.966.276.576.867.167.467.878.068.158.969.60
10.1010.6011.1011.60
2.442.572.632.662.742.812.882.942.983.043.113.183.313.423.493.533.583.663.683.783.873.964.074.114.184.244.314.404.504.584.915.045.185.475.756.056.346.626.917.207.607.788.078.649.269.74
10.2210.7011.20
.232
.225
.236
.225
.272
.272
.236
.236
.236
.258
.236
.273
.284
.268
.268
.268
.268
.305
.284
.284
.284
.284
.320
.320
.323
.335
.337
.335
.323
.352
.323
.323
.323
.352
.352
.457
.457
.457
.457
.508
.508
.508
.508
.632
.632
.632
.632
.632
.632
.224
.217
.228
.217
.220
.222
.228
.228
.228
.250
.228
.246
.275
.260
.260
.260
.260
.272
.276
.276
.276
.276
.285
.288
.315
.302
.310
.318
.318
.344
.318
.318
.285
.303
.344
.372
.390
.408
.381
.396
.438
.458
.460
.507
.540
.573
.609
.625
.625
.123
.123
.123
.123
.123
.123
.123
.123
.123
.123
.123
.123
.123
.123
.123
.123
.123
.123
.123
.123
.123
.123
.123
.123
.123
.123
.123
.123
.123
.123
.123
.123
.123
.123
.151
.151
.151
.151
.151
.151
.151
.182
.182
.182
.182
.182
.182
.182
.182
1.8861.9462.0032.0322.1202.1782.2392.2992.3602.4192.4812.5412.6022.7212.7792.8382.8982.9572.9863.0763.1663.2573.3163.3573.4353.4933.5523.6733.7343.7924.0654.1904.3104.5504.7905.0305.2655.5055.7455.9856.2256.4656.7057.1807.6608.1408.6209.1009.575
±.006
±.007
±.008
.068
.086
.086
.086
.086
.086
.086
.086
.086
.086
.086
.086
.103
.103
.103
.103
.103
.103
.103
.103
.103
.103
.120
.120
.120
.120
.120
.120
.120
.120
.120
.120
.120
.120
.120
.139
.139
.139
.139
.174
.174
.174
.174
.209
.209
.209
.209
.209
.209
+.004-.000
+.005-.000
+.006-.000
+.008-.000
.178
.183
.192
.195
.204
.210
.213
.217
.219
.219
.225
.230
.231
.240
.247
.252
.255
.261
.264
.270
.279
.280
.285
.288
.294
.301
.306
.312
.315
.321
.287
.287
.294
.309
.324
.339
.363
.378
.393
.409
.425
.440
.455
.492
.522
.562
.582
.612
.650
19.025.026.126.327.728.029.229.529.733.935.036.042.548.550.052.047.558.059.062.064.066.072.073.076.080.083.088.095.0
101.0112.0115.0121.0133.0149.0190.0202.0220.0240.0282.0330.0356.0388.0584.0640.0692.0737.0785.0910.0
17500227502340023800248002540026150269002760028200290002960036100378003870039500403004110041500428004400045300539005465055900568005770059600607006170065500674006930073200770009270097200
101600105900137700143300148800154000198200211400224600237800251000264200
Std. 6
Major
SHAFTDIAMETER S
Frac. Dec. mminch inch
PARTNUMBER
RING THICKNESS FREE DIAMETER
t Tol. D Tol. C C1 L b hinches inches inches inches (max) ~ (min)
GROOVE DIAMETER WIDTH
G Tol. W Tol. ninches inches inches inches (min)
APPROX THRUST PLIER
WT. LB / LOAD NO.1000 (LBS)PCS.
When Sprung onto Shaft When Sprung into Groove
ARCO
N
AR ON
Page 14
ARCON RING AND SPECIALTY CORPORATIONOver Thirty Years of Service14
1405
0.093” to 1.002”
Standard MaterialCarbon Spring Steel
Standard FinishPhosphate and oil
“PUSH-ON”EXTERNAL
1465
0.091” to 1.005”
Standard MaterialCarbon Spring Steel
Standard FinishPhosphate and oil
“PUSH-ON”EXTERNAL
HEAVY DUTY
† Thrust load calculations see page 5
† Thrust load calculations see page 5
ARCO
N
AR ON
PARTNUMBER
SHAFTDIAMETER S
min. max. fraction(inch) (inch) ~
RINGOUTSIDE DIAMETER THICKNESS
D1 Tol. t Tol. n1inches inches inches inches (min)
APPROX TC+WT. LB / (lb.f)
1000PCS.
.093
.124
.155
.187
.218
.239
.249
.311
0.0950.1260.1570.1890.2200.2410.2510.313
3/321/85/323/167/32
–1/4
5/16
0.2500.3250.3560.3870.4180.4600.4500.512
±.005
.010
.010
.010
.010
.010
.015
.010
.010
±.001
±.002
±.001
.040
.040
.040
.040
.040
.060
.040
.040
0.090.140.170.200.210.350.230.26
1320253535404045
1405-91405-121405-151405-181405-211405-241405-251405-31
APPROX TC+WT. LB / (lb.f)
1000PCS.
RINGOUTSIDE DIAMETER THICKNESS
D1 Tol. t Tol. n1inches inches inches inches (min)
SHAFTDIAMETER S
min. max. fraction(inch) (inch) ~
PARTNUMBER
1405-371405-431405-501405-561405-621405-751405-871405-100
.374
.437
.498
.560
.623
.748
.873
.998
0.3760.4390.5020.5640.6270.7520.8771.002
3/87/161/2
9/165/83/47/8
1
0.5750.6380.7500.8120.8751.0001.1251.250
±.005
±.010
.010
.015
.015
.015
.015
.015
.015
.015
±.001
±.002
.040
.060
.060
.060
.060
.060
.060
.060
0.270.470.720.750.820.971.101.20
4550505050556065
PARTNUMBER
SHAFTDIAMETER S
min. max. fraction(inch) (inch) ~
RINGOUTSIDE DIAMETER RING HEIGHT THICKNESS
D1 Tol. H Tol. t Tol. n1inches inches inches inches inches inches (min)
APPROX TC+WT. LB / (lb.f)
1000PCS.
.091
.121
.152
.184
.246
.308
.371
.432
.495
.557
.620
.745
.870
.995
.097
.129
.160
.192
.254
.316
.379
.442
.505
.567
.630
.755
.8801.005
3/321/85/323/161/45/163/87/161/29/165/83/47/8
1
.326
.366
.397
.444
.522
.584
.645
.737
.828
.889
.9511.0761.2031.327
±.005
±.010
.029
.029
.043
.031
.037
.037
.037
.045
.054
.054
.054
.054
.054
.054
±.005
±.009±.007
±.008
±.009
±.010
.010
.010
.010
.010
.010
.010
.010
.015
.015
.015
.015
.015
.015
.015
±.001
±.002
.058
.058
.058
.062
.074
.074
.074
.090
.108
.108
.108
.108
.108
.108
0.150.200.220.260.390.440.480.970.741.391.471.651.962.23
27384555586065
120120125135140140140
1465-91465-121465-151465-181465-251465-311465-371465-431465-501465-561465-621465-751465-871465-100
Page 15
ARCON RING AND SPECIALTY CORPORATIONOver Thirty Years of Service 15
1440
0.077” to .755”
Standard MaterialCarbon Spring Steel
Standard FinishPhosphate and oil
MS 90707
GRIP RINGEXTERNAL
May be used without grooves
1460
0.394” to 2.00”
Standard MaterialCarbon Spring Steel
Standard FinishPhosphate
and oil
MS 3217
HEAVY DUTYEXTERNAL
1460-391460-421460-471460-501460-591460-621460-661460-751460-751460-871460-981460-981460-1061460-1121460-1181460-1181460-1251460-1311460-1371460-1371460-1501460-1561460-1561460-1751460-1751460-1931460-1931460-200
–––
1/2
–5/8
–3/4
–7/8
63/64
111/16
11/8
–13/16
11/4
15/16
13/8
–11/2
19/16
–13/4
–115/16
131/32
2
.394
.428
.473
.500
.591
.625
.669
.750
.787
.875
.9841.0001.0621.1251.1811.1881.2501.3121.3751.3781.5001.5621.5751.7501.7721.9381.9692.000
10.010.912.012.715.015.917.019.020.022.225.025.427.028.630.030.231.733.334.935.038.139.740.044.445.049.250.050.8
.035
.035
.042
.050
.050
.050
.050
.078
.078
.078
.078
.078
.093
.093
.093
.093
.093
.093
.093
.093
.109
.109
.109
.109
.109
.125
.125
.125
±.002
±.003
±.004
.362
.394
.435
.460
.543
.575
.616
.689
.689
.804
.906
.906
.9781.0361.0871.0871.1501.2081.2681.2681.3801.4371.431.6081.6081.7821.7821.840
+.003-.008
+.005-.010
+.010-.015
+.013.020
.58
.62
.66
.72
.83
.86
.901.081.121.201.301.311.461.521.571.571.631.691.751.751.982.052.062.252.272.482.502.53
.368
.402
.444
.468
.555
.588
.629
.704
.740
.821
.925
.938
.9981.0591.1111.1111.1741.2341.2911.2911.4061.4681.4801.6501.6691.8261.8501.880
+.001-.002
+.001-.003
+.002-.004
+.003-.004
.039
.039
.046
.056
.056
.056
.056
.086
.086
.086
.086
.086
.103
.103
.103
.103
.103
.103
.103
.103
.120
.120
.120
.120
.120
.139
.139
.139
+.003-.000
+.004-.000
+.005-.000
+.006-.000
.70
.861.41.62.22.32.65.65.67.57.87.8
11.512.513.513.514.916.017.817.827.031.031.033.433.448.648.650.6
200023003000390045004800520090009000
10400115001150015000160001650016500175001800019500195002450026000260002900029000370003700038000
SHAFTDIAMETER S
Frac. Dec. mminch inch
PARTNO.
RING THICKNESS FREE DIAMETER
t Tol. D Tol. C1inches inches inches inches
GROOVE DIAMETER WIDTH
G Tol. W Tol.inches inches inches inches
APPROX THRUST
WT. LB / LOAD
1000 (LBS)PCS.
1440-311440-351440-371440-391440-431440-501440-551440-591440-621440-75
.310
.351
.372
.391
.434
.496
.550
.587
.620
.745
.317
.357
.379
.397
.440
.505
.556
.593
.631
.755
5/16
–3/8
–7/161/2
–19/32
5/83/4
8.09.09.5
10.011.012.714.015.016.019.0
.298
.341
.354
.380
.412
.470
.531
.571
.593
.706
+.003-.005
±.004+.003-.005
±.004+.003-.005
+.004-.006
.042
.047
.042
.047
.050
.050
.059
.059
.062
.062
±.003
±.004
.67
.74
.73
.76
.80
.90
.991.061.061.30
1.391.761.722.082.612.915.406.165.706.88
44506060616576818591
Lug design for sizes7-9-11-19-23-27
Beam configurationon some larger sizes
When Sprung into Groove
† Thrust load calculations see page 5
ARCO
N
AR ON
SHAFTDIAMETER S
min. max. fraction mm(inch) (inch) ~
RINGFREE DIAMETER THICKNESS
D Tol. t Tol. Cinches inches inches inches
APPROX TC+WT. LB / (lb.f)1000PCS.
PARTNO.
.077
.092
.116
.123
.134
.154
.185
.194
.234
.247
.274
.081
.096
.120
.127
.138
.158
.189
.200
.239
.253
.278
5/643/32
–1/8
–5/323/16
–15/641/4
–
2.02.43.03.23.54.04.85.06.06.37.0
.074
.089
.112
.120
.130
.150
.181
.187
.224
.238
.264
+.002-.003
+.002-.004
±.003+.002-.004
±.004
.024
.025
.024
.025
.025
.025
.035
.032
.039
.035
.039
±.002
±.003
.25
.26
.29
.33
.31
.36
.44
.44
.50
.50
.54
.08
.10
.14
.24
.27
.30
.55
.45
.85
.74
.93
1111162020232530353540
1440-71440-91440-111440-121440-131440-151440-181440-191440-231440-251440-27
APPROX TC+WT. LB / (lb.f)1000PCS.
RINGFREE DIAMETER THICKNESS
D Tol. t Tol. Cinches inches inches inches
SHAFTDIAMETER S
min. max. fraction mm(inch) (inch) ~
PARTNUM-BER
Page 16
ARCON RING AND SPECIALTY CORPORATIONOver Thirty Years of Service16
1500
.040” to 1.375”
Standard Material4 Beryllium CopperX6 up Carbon Spring SteelStandard Finish4 Self FinishX6 up Phosphate
MS 16633STANDARD E-RINGEXTERNAL
1500-41500-X61500-Y61500-61500-X91500-91500-X111500-121500-X141500-Y141500-141500-151500-X171500-X181500-181500-X211500-251500-X311500-371500-431500-X431500-501500-621500-X741500-751500-871500-X981500-X1181500-X137
–1/161/161/163/323/327/641/89/649/649/645/3211/643/163/167/321/45/163/87/167/161/25/83/43/47/8
113/16
13/8
.040
.062
.062
.062
.094
.094
.110
.125
.140
.140
.140
.156
.172
.188
.188
.219
.250
.312
.375
.438
.438
.500
.625
.744
.750
.875
.9841.1881.375
11.51.61.52.42.42.83.23.63.63.64.04.44.84.85.66.37.99.5
11.111.112.715.919.019.022.225.030.234.9
.010
.010
.020
.010
.015
.015
.015
.015
.015
.015
.025
.025
.025
.025
.025
.025
.025
.025
.035
.035
.035
.042
.042
.050
.050
.050
.050
.062
.062
±.001
±.002±.001
±.002
±.003
.025
.051
.051
.051
.069
.073
.076
.094
.100
.108
.102
.114
.125
.122
.145
.185
.207
.243
.300
.337
.375
.392
.480
.616
.574
.668
.8221.0661.213
+.001-.003
+.002-.003
+.001-.003
+.002-.004
+.003-.005
+.006-.010
.079
.140
.187
.156
.230
.187
.375
.230
.203
.250
.270
.282
.312
.375
.335
.437
.527
.500
.660
.687
.600
.800
.9401.0001.1201.3001.5001.6261.875
.090
.150
.200
.165
.245
.200
.390
.240
.215
.265
.285
.295
.325
.390
.350
.450
.540
.520
.680
.710
.620
.820
.9601.021.141.321.531.6701.920
.026
.052
.052
.052
.074
.074
.079
.095
.102
.110
.105
.116
.127
.125
.147
.188
.210
.250
.303
.343
.380
.396
.485
.625
.580
.675
.8351.0791.230
+.002-.000±.002
+.002-.000
+.003-.000
.012
.012
.023
.012
.020
.020
.020
.020
.020
.020
.029
.029
.029
.029
.029
.029
.029
.029
.039
.039
.039
.046
.046
.056
.056
.056
.056
.068
.068
+.002-.000
+.003-.000
+.004-.000
.009
.028
.094
.030
.100
.058
.310
.087
.060
.10
.21
.21
.24
.45
.29
.47
.76
.571.51.51.02.53.24.35.87.69.2
11.315.4
13204020454560657575
170175180200190225255325690830800
11101420195020002350265034504100
AM 1AM 2
–AM 3AM 4AM 5AM 6AM 7AM 8AM 9AM 10AM 11AM 12AM 13AM 14AM 15AM 16AM 17AM 18AM 19AM 20AM 21AM 22AM 23AM 24AM 25AM 26AM 28
–
–SF 2
–SF 3SF 4SF 5SF 6SF 7SF 8SF 9SF 10SF 11SF 12SF 13SF 14SF 15SF 16SF 17SF 18SF 19SF 20SF 21SF 22SF 23SF 24SF 25SF 26SF 28
–
1540
.094” to .562”
Standard MaterialCarbon Spring Steel
Standard FinishPhosphate and oil
MS 3215REINFORCED E-RINGEXTERNAL
1540-91540-121540-151540-181540-211540-251540-311540-371540-431540-501540-56
SHAFTDIAMETER S
Frac. Dec. mminch inch
PARTNUMBER
RING THICKNESS FREE DIAMETER
t Tol. D Tol. C C1inches inches inches inches
GROOVE DIAMETER WIDTH
G Tol. W Tol.inches inches inches inches
APPROX PERMISSIBLE ASSEMBLY TOOLSWT. LB / THRUST APPLICATOR DISPENSER
1000 LOAD NO. NO.PCS. (LBS)
When Sprung into Groove
When Sprung into Groove
ARCO
N
AR ON
3/321/85/323/167/321/45/163/87/161/29/16
.094
.125
.156
.188
.219
.250
.312
.375
.438
.500
.562
2.43.24.04.85.66.37.99.5
11.112.714.3
.015
.015
.025
.025
.025
.025
.025
.035
.035
.042
.042
±.002
.072
.093
.113
.143
.182
.204
.242
.292
.332
.385
.430
+.001-.003
+.002-.003
±.003
±.004
.206
.270
.335
.375
.446
.516
.588
.660
.746
.810
.870
.219
.283
.35
.39
.46
.53
.61
.68
.77
.83
.89
.074
.095
.116
.147
.188
.210
.250
.303
.343
.396
.437
+.002-.000
±.002
±.003
.018
.018
.029
.029
.029
.029
.039
.039
.039
.046
.046
+.002-.000
+.003-.000
.07
.13
.31
.39
.54
.711.21.51.93.23.5
5075
150180220250420520600820930
AM 30AM 31AM 32AM 33AM 34AM 35AM 36AM 37AM 38AM 39AM 40
SF 30SF 31SF 32SF 33SF 34SF 35SF 36SF 37SF 38SF 39SF 40
GROOVE DIAMETER WIDTH
G Tol. W Tol.inches inches inches inches
APPROX PERMISSIBLE ASSEMBLY TOOLSWT. LB / THRUST APPLICATOR DISPENSER
1000 LOAD NO. NO.PCS. (LBS)
RING THICKNESS FREE DIAMETER
t Tol. D Tol. C C1inches inches inches inches
SHAFTDIAMETER S
Frac. Dec. mminch inch
PARTNUMBER
Page 17
ARCON RING AND SPECIALTY CORPORATIONOver Thirty Years of Service 17
1800
.125” to 2.00”
Standard MaterialCarbon Spring Steel
Standard FinishPhosphate and oil
MS 16632STANDARD C-RING
EXTERNAL
1800-121800-151800-181800-211800-231800-251800-281800-311800-371800-401800-431800-501800-561800-621800-681800-751800-811800-871800-931800-1001800-1121800-1251800-1371800-1501800-1751800-200
1/85/323/167/3215/641/4
9/325/163/8
13/327/161/29/165/8
11/163/4
13/167/8
15/16
111/8
11/4
13/8
11/2
13/4
2
.125
.156
.188
.219
.236
.250
.281
.312
.375
.406
.438
.500
.562
.625
.688
.750
.812
.875
.9381.0001.1251.2501.3751.5001.7502.000
3.24.04.85.66.06.47.17.99.5
10.311.112.714.315.917.519.020.622.223.825.428.631.734.938.144.450.8
.015
.015
.015
.025
.025
.025
.025
.025
.025
.025
.025
.035
.035
.035
.042
.042
.042
.042
.042
.042
.050
.050
.050
.050
.062
.062
±.002
±.003
.102
.131
.161
.187
.203
.211
.242
.270
.328
.359
.386
.441
.497
.553
.612
.665
.721
.777
.830
.887
.9971.1101.2201.3311.5551.777
+.002-.004
+.003-.005
±.006
±.007
±.008
±.010
.165
.205
.244
.275
.295
.311
.346
.376
.448
.486
.517
.581
.653
.715
.784
.845
.915
.9911.0581.1301.2671.4151.5551.6911.9752.257
.18
.22
.25
.29
.31
.33
.36
.39
.47
.50
.53
.60
.67
.74
.80
.87
.915
.9911.0581.1301.2671.4151.5551.6911.9752.257
.106
.135
.165
.193
.208
.220
.247
.276
.335
.364
.393
.450
.507
.563
.619
.676
.732
.789
.843
.9001.0131.1261.2371.3501.5761.800
±.0015
±.002
±.003
±.004
±.005
.020
.020
.020
.029
.029
.029
.029
.029
.029
.029
.029
.039
.039
.039
.046
.046
.046
.046
.046
.046
.056
.056
.056
.056
.068
.068
+.002-.000
+.003-.000
+.004-.000
.030
.052
.062
.120
.150
.157
.190
.226
.300
.352
.359
.671
.710
.9371.31.51.72.02.32.74.05.16.17.6
12.916.2
85100130260280290330370440480520830930
1030170018502010217023202480332036804050442064307300
AM 50AM 8AM 10AM 53AM 54AM 12AM 56AM 13AM 58AM 59AM 16AM 61AM 18AM 63AM 64AM 65AM 66AM 67AM 68AM 69
––––––
SF 50SF 51SF 52SF 53SF 54SF 55SF 56SF 57SF 58SF 59SF 60SF 61SF 62SF 63SF 64SF 65SF 66SF 67SF 68SF 69
––––––
When Sprung into Groove
ARCO
N
AR ON
GROOVE DIAMETER WIDTH
G Tol. W Tol.inches inches inches inches
APPROX PERMISSIBLE ASSEMBLY TOOLSWT. LB / THRUST APPLICATOR DISPENSER
1000 LOAD NO. NO.PCS. (LBS)
RING THICKNESS FREE DIAMETER
t Tol. D Tol. C C1inches inches inches inches
SHAFTDIAMETER S
Frac. Dec. mminch inch
PARTNUMBER
Installed State
0.188” to 1.00”
C1008 - 1010
Obtainable inStainless Steel
WA/AARRINGS
"Crimp Ring"TOLERANCES:Tolerances on “C” dimensionsare minus as follows:
3/16” to 5/16” sizes 4%3/8” to 1” sizes 3%
Tolerances on “O” dimensionsare plus as follows:
3/16” to 5/16” sizes 4%3/8” to 1” sizes 4%
Tolerance on “t” (thickness)dimension are as follows:
.031 to .039 sizes ±.002
.047 to .125 sizes +.000and -.004
GAP: Gap furnished in open position and butted when closed into groove
Free State
RING THICKNESS WIDTH
t W C C1 Oinches inches
SHAFTDIAMETER S
Frac. Dec.inch inch
PART REFERENCE
NUMBER NUMBER
GROOVEDIMENSIONS
A BWidth Depth
APPROXWT. LB/
1000 PCS.3/167/321/45/163/87/161/29/165/8
11/163/4
13167/8
15/16
1
.188
.219
.250
.312
.375
.438
.500
.562
.625
.688
.750
.812
.875
.9381.000
.031
.031
.031
.039
.047
.055
.063
.070
.078
.086
.094
.102
.109
.117
.125
.062
.046
.062
.079
.094
.109
.125
.141
.156
.172
.188
.203
.219
.234
.250
.174
.230
.260
.328
.394
.459
.525
.591
.656
.722
.788
.853
.919
.9841.050
.125
.173
.187
.251
.313
.376
.438
.493
.547
.602
.656
.711
.765
.820
.874
.125
.143
.182
.191
.264
.203
.233
.241
.253
.278
.310
.331
.357
.387
.423
.034
.034
.034
.043
.052
.060
.069
.077
.086
.094
.103
.112
.120
.129
.138
.031
.023
.031
.031
.031
.031
.031
.035
.039
.043
.047
.051
.055
.059
.063
.32
.25
.42
.941.652.613.925.537.57
10.1313.2016.7420.8025.5331.10
WA-510WA-512WA-514WA-516WA-518WA-520WA-522WA-524WA-526WA-528WA-530WA-532WA-534WA-536WA-538
AAR-316AAR-732AAR-14AAR-516AAR-38AAR-716AAR-12AAR-916AAR-58AAR-1116AAR-34AAR-1316AAR-78AAR-1516AAR-1
Page 18
18
5304T-5304
0.156” to 2.00”
Standard MaterialCarbon Spring Steel
Standard FinishPhosphate
KLIPRING®EXTERNAL
ARCON RING AND SPECIALTY CORPORATIONOver Thirty Years of ServiceAR
CON
AR ON
EDGEDEPTH MARGIN
d Zref min
When Sprung into Groove
Fig. 15304-15 and
T5304-15 only
Sizes -18thru -50
Sizes -62thru -100
Sizes -125 thru -200(Series 5304 Only)
Detail of Groove
RING THICKNESS FREE DIAMETER
t Tol. D Tol. C C1 binches inches inches inches nom
GROOVE DIAMETER WIDTH
G Tol. W Tol.inches inches inches inches
SHAFTDIAMETER S
Frac. Dec. mminch inch
PARTNUMBER
APPROXWT. LB /
1000PCS.
5/323/161/45/163/87/161/25/83/4
111/4
11/2
13/4
2
.156
.188
.250
.312
.375
.438
.500
.625
.7501.0001.2501.5001.7502.000
4.04.86.47.99.5
11.112.715.919.025.431.838.144.450.8
.035
.035
.035
.042
.042
.050
.050
.050
.062
.078
.093
.109
.125
.125
±.002
±.003
±.004
.110
.140
.188
.250
.312
.375
.406
.500
.594
.8121.0321.2501.4061.625
±.003
±.004
±.005
±.006
±.008±.010±.011
see fig.1.400.482.588.680.752.826.966
1.0951.4151.8002.0502.3002.650
.39
.42
.52
.63
.72
.79
.891.031.171.511.902.181.451.83
.042
.048
.056
.074
.081
.081
.097
.086
.095
.115
.180
.208
.235
.250
.120
.148
.210
.272
.331
.390
.440
.531
.632
.8601.0901.3171.4801.730
±.004±.005
±.006
±.008
±.010
±.015
.039
.039
.039
.046
.046
.056
.056
.056
.068
.086
.103
.120
.139
.139
+.006
+.008
+.010
.018
.020
.020
.020
.022
.024
.030
.047
.059
.070
.080
.091
.135
.135
.036
.040
.040
.040
.044
.048
.060
.094
.118
.140
.160
.182
.270
.270
.42
.63
.841.461.922.663.304.657.48
13.829.037.158.659.2
5304-155304-185304-255304-315304-375304-435304-505304-625304-755304-1005304-1255304-1505304-1755304-200
RING THICKNESS FREE DIAMETER
t Tol. D Tol. C C1 binches inches inches inches nom
GROOVE DIAMETER WIDTH
G Tol. W Tol.inches inches inches inches
EDGEDEPTH MARGIN
d Zref min
APPROXWT. LB /
1000PCS.
SHAFTDIAMETER S
Frac. Dec. mminch inch
PARTNUMBER
T5304-15T5304-18T5304-25T5304-31T5304-37T5304-43T5304-50T5304-62T5304-75T5304-100
5/323/161/45/163/87/161/25/83/4
1
.156
.188
.250
.312
.375
.438
.500
.625
.7501.000
4.04.86.47.99.5
11.112.715.919.025.4
.025
.025
.025
.025
.035
.035
.042
.042
.050
.050
±.002
.110
.140
.188
.250
.312
.375
.406
.500
.594
.812
±.003
±.004
±.005
±.006
see fig.1.400.482.588.680.752.826.966
1.0951.415
.39
.42
.52
.63
.72
.79
.891.031.171.51
.042
.048
.056
.074
.081
.081
.097
.086
.095
.115
.120
.148
.210
.272
.331
.390
.440
.531
.632
.860
±.004±.005
±.006
±.008
±.010
.029
.029
.029
.029
.039
.039
.046
.046
.056
.056
+.006
+.008
.018
.020
.020
.020
.022
.024
.030
.047
.059
.070
.036
.040
.040
.040
.044
.048
.060
.094
.118
.140
.30
.45
.60
.871.601.862.773.916.038.8
Page 19
ARCON RING AND SPECIALTY CORPORATIONOver Thirty Years of Service 19
D1500
1.2mm to 31.5mm
Standard MaterialCarbon Spring Steel
Standard FinishPhosphate and oil
DIN 6799
STANDARD METRIC “E”EXTERNAL
When Sprung into Groove
† Thrust load calculations see page 5
ARCO
N
AR ON
D1500-.8D1500-1.2D1500-1.5D1500-1.9D1500-2.3D1500-3.2D1500-4D1500-5D1500-6D1500-7D1500-8D1500-9D1500-10D1500-12D1500-15D1500-19D1500-24
1.201.702.252.753.504.506.007.008.009.50
10.5012.0013.0015.5020.0025.5031.50
±0.20±0.30±0.25
±0.50
±1.00
±1.50
±2.00
±2.50±4.00±5.50±6.50
0.200.300.400.500.600.600.700.700.700.901.001.101.201.301.501.752.00
±0.02
±0.03
1.952.903.854.405.906.808.80
10.7511.7513.8015.6018.2019.6522.6528.6036.7043.65
2.253.254.254.86.37.39.3
11.312.314.316.318.820.423.429.437.644.6
0.581.011.281.611.942.703.344.115.265.846.527.638.32
10.4512.6115.9221.88
±0.04
±0.048
±0.058
±0.07
±0.084
0.81.21.51.92.33.24.05.06.07.08.09.0
10.012.015.019.024.0
+0.00-0.04+0.00-0.06
+0.00-0.075
+0.00-0.09
+0.00-0.11+0.00-0.13
0.240.340.440.540.640.640.740.740.740.941.051.151.251.351.551.852.05
+0.04-0.00
+0.05-0.00
+0.08-0.00
0.40.60.81.01.01.01.21.21.21.51.82.02.02.53.03.54.0
1.200.250.380.430.600.651.001.001.001.251.251.501.501.752.503.253.75
63203358546835
107016701950222034004170525062008010
119001770025000
3053
105145260365745870995
148016302240243033706220
1030014700
–28
21 A223 C30
23 B7 B2415
16 C252627
20 B32 A
–
–DR 44DR 56DR 72DR 87DR 123DR 154DR 194DR 232FR 273FR 311FR 350FR 389FR 468FR 586FR 743
–
RINGTHICKNESS DIAMETER
t Tol. C C1 A Tol.mm mm mm mm
GROOVE DIAMETER WIDTH
G Tol. W Tol. n d mm mm mm mm (min) Nom
ASSEMBLY TOOLSTc† Tg† APPLICATOR DISPENSER
(N) (N) NO. NO.
PARTNUMBER
SHAFTDIAMETER
S Tol.mm mm
Metric Circlips
Page 20
ARCON RING AND SPECIALTY CORPORATIONOver Thirty Years of Service20
D1400
3 mm to 400 mm
Standard Material3 Beryllium Copper4 up Carbon Spring Steel
Standard Finish3 Self Finish and oil4 up Phosphate and oil
DIN 471
STANDARDMETRIC
EXTERNAL When Sprung onto Shaft When Sprung into Groove† Thrust load calculations see page 5
ARCO
N
AR ON
GROOVE DIAMETER WIDTH
G Tol. W Tol. n dmm mm mm mm (min) ~
APPROX Tc Tg PLIER
WT. KG / (N) (N) NO.1000PCS.
CIRCLIPTHICKNESS FREE DIAMETER
t Tol. D Tol. C C1 L b hmm mm mm mm (max) ~ (min)
PARTNUMBER
SHAFTS
mm
3456789
1011121314151617181920212223242526272829303233343536384042454647485052545556586062636567687072
0.400.400.600.700.800.801.001.001.001.001.001.001.001.001.001.201.201.201.201.201.201.201.201.201.201.501.501.501.501.501.501.501.751.751.751.751.751.751.751.752.002.002.002.002.002.002.002.002.002.502.502.502.502.50
+0.00-0.04
+0.00-0.06
2.73.74.75.66.57.48.49.3
10.211.011.912.913.814.715.716.517.518.519.520.521.522.223.224.224.925.926.927.929.630.531.532.233.235.236.538.541.542.543.544.545.847.849.850.851.853.855.857.858.860.862.563.565.567.5
+0.075-0.15
+0.09-0.18
+0.18-0.36
+0.21-0.42
+0.25-0.50
+0.39-0.90
+0.46-1.10
7.28.8
10.712.213.815.216.417.618.619.620.822.023.224.425.626.827.829.030.231.432.633.834.836.037.238.436.641.043.444.445.847.248.250.653.056.059.460.461.662.864.867.069.270.471.673.675.878.079.281.683.885.087.289.4
6.68.29.8
11.112.914.015.216.217.118.119.220.421.522.623.824.825.827.028.229.430.631.732.733.934.836.037.238.640.741.743.144.245.247.649.552.555.956.958.159.360.863.065.266.467.669.671.874.075.277.679.881.083.285.4
1.92.22.52.73.13.23.33.33.33.33.43.53.63.73.83.93.94.04.14.24.34.44.44.54.64.74.85.05.25.25.45.65.65.86.06.56.76.76.86.96.97.07.17.27.37.37.47.57.67.87.98.08.18.2
0.80.91.11.31.41.51.71.81.81.82.02.12.22.22.32.42.52.62.72.82.93.03.03.13.13.23.43.53.63.73.83.94.04.24.44.54.74.84.95.05.15.25.35.45.55.65.86.06.26.36.46.56.66.8
1.01.01.01.11.21.21.21.51.51.71.71.71.71.71.72.02.02.02.02.02.02.02.02.02.02.02.02.02.52.52.52.52.52.52.52.52.52.52.52.52.52.52.52.52.52.52.52.52.53.03.03.03.03.0
2.83.84.85.76.77.68.69.6
10.511.512.413.414.315.216.217.018.019.020.021.022.022.923.924.925.626.627.628.630.331.332.333.034.036.037.539.542.543.544.545.547.049.051.052.053.055.057.059.060.062.064.065.067.069.0
+0.00-0.075
+0.00-0.09
+0.00-0.11
+0.00-0.21
+0.00-0.25
+0.00-0.30
0.500.500.700.800.900.901.101.101.101.101.101.101.101.101.101.301.301.301.301.301.301.301.301.301.301.601.601.601.601.601.601.601.851.851.851.851.851.851.851.852.152.152.152.152.152.152.152.152.152.652.652.652.652.65
+0.14-0.00
0.30.30.30.50.50.60.60.60.80.80.90.91.11.21.21.51.51.51.51.51.51.71.71.72.12.12.12.12.62.62.63.03.03.03.83.83.83.83.83.84.54.54.54.54.54.54.54.54.54.54.54.54.54.5
0.100.100.100.150.150.200.200.200.250.250.300.300.350.400.400.500.500.500.500.500.500.550.550.550.700.700.700.700.850.850.851.001.001.001.251.251.251.251.251.251.501.501.501.501.501.501.501.501.501.501.501.501.501.50
0.020.030.080.130.180.200.320.400.410.450.520.560.620.690.770.991.101.181.261.391.541.521.701.751.892.472.752.933.023.303.723.784.555.085.545.996.757.247.307.519.889.5
10.3010.4110.5012.4713.6912.3613.1020.4420.4319.5522.1321.60
11001600200041005500620088009700
107001170012700136001460015600166002100022200234002450025700269002800029200304003160040900424004380046700482004970051100514005480056600595006370065100665006790080900841008740089000906009380097100100000102000131000135000138000142000146000
110150180330390590660740
101011101440155019302350250033003490368038604050424048605070528069407200747077309980
10300106001280013200140001830019200206002110021600220002740028600297003030030800320003310034200348003590037000376003870039900
Mini AMini B
Mini C
HA 1or
HB 1
HA 2or
HB 2
HA 3or
HB 3
D1400-3D1400-4D1400-5D1400-6D1400-7D1400-8D1400-9D1400-10D1400-11D1400-12D1400-13D1400-14D1400-15D1400-16D1400-17D1400-18D1400-19D1400-20D1400-21D1400-22D1400-23D1400-24D1400-25D1400-26D1400-27D1400-28D1400-29D1400-30D1400-32D1400-33D1400-34D1400-35D1400-36D1400-38D1400-40D1400-42D1400-45D1400-46D1400-47D1400-48D1400-50D1400-52D1400-54D1400-55D1400-56D1400-58D1400-60D1400-62D1400-63D1400-65D1400-67D1400-68D1400-70D1400-72
Page 21
ARCON RING AND SPECIALTY CORPORATIONOver Thirty Years of Service 21
D1400
3 mm to 400 mm
Standard Material3 Beryllium Copper
4 up Carbon Spring Steel
Standard Finish3 Self Finish and oil
4 up Phosphate and oil
DIN 471
STANDARDMETRIC
EXTERNALWhen Sprung onto Shaft When Sprung into Groove † Thrust load calculations see page 5
ARCO
N
AR ON
CIRCLIPTHICKNESS FREE DIAMETER
t Tol. D Tol. C C1 L b hmm mm mm mm (max) ~ (min)
GROOVE DIAMETER WIDTH
G Tol. W Tol. n dmm mm mm mm (min) ~
APPROX Tc Tg PLIER
WT. KG / (N) (N) NO.1000PCS.
SHAFTS
mm
PARTNUMBER
75777880828588909598
100102105108110115120125130135140145150155160165170175180185190195200205210220230240250260270280290300310320330340350360370380390400
2.502.502.502.502.503.003.003.003.003.003.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.005.005.005.005.005.005.005.005.005.005.005.006.006.006.006.006.006.006.006.006.006.00
+0.00-0.06
+0.00-0.075
+0.00-0.18
70.5–
73.574.576.579.582.584.589.592.594.595.098.0–
103.0108.0113.0118.0123.0128.0133.0138.0142.0146.0151.0155.5160.5165.5170.5175.5180.5185.5190.5193.0198.0208.0218.0228.0238.0245.0255.0265.0275.0285.0293.0303.0313.0323.0333.0343.0353.0363.0373.0383.0
+0.46-1.10
+0.54-1.30
+0.63-1.50
+0.72-1.70
+0.81-2.00
+1.00-2.20
92.895.096.298.2
101.0104.0107.0109.0115.0119.0121.0123.0126.0130.0132.0138.0143.0149.0155.0160.0165.0171.0177.0182.0188.0193.0197.0202.0208.0213.0219.0224.0229.0234.0239.0249.0259.0269.0279.0293.0303.0313.0323.0333.0349.0359.0369.0379.0389.0399.0409.0419.0429.0439.0
88.891.092.293.795.998.9
102.0104.0110.0113.0116.0117.0121.0124.0126.0132.0138.0144.0149.0155.0160.0165.0171.0176.0182.0187.0191.0196.0202.0207.0213.0218.0223.0227.0232.0242.0252.0262.0272.0284.0294.0304.0314.0324.0340.0350.0360.0370.0380.0390.0400.0410.0420.0430.0
8.48.58.68.68.78.78.88.89.49.59.69.79.9
10.010.110.611.011.411.611.812.012.213.013.013.313.513.513.514.214.214.214.214.214.214.214.214.214.214.216.216.216.216.216.220.220.220.220.220.220.220.220.220.220.2
7.07.27.37.47.67.88.08.28.69.09.09.29.39.59.69.8
10.210.410.711.011.211.511.812.012.212.512.912.913.513.514.014.014.014.014.014.014.014.014.016.016.016.016.016.020.020.020.020.020.020.020.020.020.020.0
3.03.03.03.03.03.53.53.53.53.53.53.53.53.53.53.53.54.04.04.04.04.04.04.04.04.04.04.04.04.04.04.04.04.04.04.04.04.04.05.05.05.05.05.06.06.06.06.06.06.06.06.06.06.0
72.074.075.076.578.581.584.586.591.594.596.598.0
101.0104.0106.0111.0116.0121.0126.0131.0136.0141.0145.0150.0155.0160.0165.0170.0175.0180.0185.0190.0195.0199.0204.0214.0224.0234.0244.0252.0262.0272.0282.0292.0300.0310.0320.0330.0340.0350.0360.0370.0380.0390.0
+0.00-0.30
+0.00-0.35
+0.00-0.54
+0.00-0.63
+0.00-0.72
+0.00-0.81
+0.00-0.89
2.652.652.652.652.653.153.153.153.153.153.154.154.154.154.154.154.154.154.154.154.154.154.154.154.154.154.154.154.154.154.154.154.155.155.155.155.155.155.155.155.155.155.155.156.206.206.206.206.206.206.206.206.206.20
+0.14-0.00
+0.18-0.00
+0.22-0.00
4.54.54.55.35.35.35.35.35.35.35.36.06.06.06.06.06.06.06.06.06.06.07.57.57.57.57.57.57.57.57.57.57.59.09.09.09.09.09.0
12.012.012.012.012.015.015.015.015.015.015.015.015.015.015.0
1.501.501.501.751.751.751.751.751.751.751.752.002.002.002.002.002.002.002.002.002.002.002.502.502.502.502.502.502.502.502.502.502.503.003.003.003.003.003.004.004.004.004.004.005.005.005.005.005.005.005.005.005.005.00
24.6524.2628.1026.6828.3535.4039.8538.8942.3954.0048.8668.7373.1683.4575.2478.6585.5899.6298.10
113.40119.18128.53132.80136.06137.50151.96169.00173.70188.00193.00203.00209.50214.00278.00285.00298.50312.00326.00340.00414.00430.50446.50463.00479.00710.50734.00757.00780.00805.00827.00850.00873.00896.00919.00
152000156000158000162000166000206000214000218000231000238000243000330000340000349000356000372000388000404000421000437000453000470000485000501000518000534000550000566000582000598000615000631000647000721000739000775000809000844000880000915000950000985000
102000010560001308920135100013930001436000147800015200001562000160400016460001689000
41600427004330051600530005490056900582006150063500648007540077700799008140085200890006280096500100000104000108000139000144000148000153000158000163000167000172000177000181000186000228000234000345000257000268000279000386000401000416200431200446300575000593800612600631500650300669000688000706900725700744600
HA 3or
HB 3
MAJOR88
MAJORX 88
D1400-75D1400-77D1400-78D1400-80D1400-82D1400-85D1400-88D1400-90D1400-95D1400-98D1400-100D1400-102D1400-105D1400-108D1400-110D1400-115D1400-120D1400-125D1400-130D1400-135D1400-140D1400-145D1400-150D1400-155D1400-160D1400-165D1400-170D1400-175D1400-180D1400-185D1400-190D1400-195D1400-200D1400-205D1400-210D1400-220D1400-230D1400-240D1400-250D1400-260D1400-270D1400-280D1400-290D1400-300D1400-310D1400-320D1400-330D1400-340D1400-350D1400-360D1400-370D1400-380D1400-390D1400-400
Page 22
ARCON RING AND SPECIALTY CORPORATIONOver Thirty Years of Service
D1300
8 mm to 400 mm
Standard MaterialCarbon Spring Steel
Standard FinishPhosphate and oil
DIN 472
STANDARDMETRIC
INTERNAL
22
When Sprung onto Shaft When Sprung into Groove† Thrust load calculations see page 5
ARCO
N
AR ON
PARTNUMBER
BOREB
mm
CIRCLIPTHICKNESS FREE DIAMETER
t Tol. D Tol. C C1 L b hmm mm mm mm (max) ~ (min)
GROOVE DIAMETER WIDTH
G Tol. W Tol. n dmm mm mm mm (min) ~
APPROX Tc Tg PLIER
WT. KG / (N) (N) NO.1000PCS.
89
9.510111213141516171819202122232425262728293031323334353637384041424547485051525556575860626365676870727576
0.800.801.001.001.001.001.001.001.001.001.001.001.001.001.001.001.201.201.201.201.201.201.201.201.201.201.201.501.501.501.501.501.751.751.751.751.751.752.002.002.002.002.002.002.002.002.002.002.502.502.502.502.502.502.50
+0.00-0.06
8.79.8
10.310.811.813.014.115.116.217.318.319.520.521.522.523.524.625.926.927.929.130.131.132.133.434.435.536.537.838.839.840.843.544.545.548.550.551.554.255.256.259.260.262.262.264.266.267.269.272.072.274.576.579.580.7
+0.36-0.18
+0.42-0.21
+0.50-0.25
+0.90-0.39
+1.10-0.46
2.83.53.53.13.94.75.36.07.07.78.48.99.8
10.611.612.613.614.215.015.616.617.418.419.419.620.221.222.223.224.225.026.027.428.229.231.633.234.636.037.037.640.441.442.443.244.446.447.448.050.651.453.455.458.459.4
3.64.43.94.04.85.76.47.28.39.2
10.010.811.812.613.614.615.716.417.217.819.019.820.821.822.322.923.924.926.227.228.029.030.931.732.735.136.737.740.041.041.644.445.446.447.248.450.451.452.854.655.457.459.462.463.4
2.42.53.03.23.33.43.63.73.73.83.94.14.14.24.24.24.24.44.54.74.74.84.84.85.25.25.45.45.45.45.55.55.85.95.96.26.46.46.56.56.76.86.86.86.97.37.37.37.67.77.87.87.87.87.9
1.11.31.41.41.51.71.81.92.02.02.12.22.22.32.42.52.52.62.72.82.92.93.03.03.23.23.33.33.44.03.23.73.94.04.14.34.44.54.64.74.75.05.15.15.25.45.55.65.86.06.16.26.46.66.7
1.01.01.21.21.21.51.51.71.71.71.72.02.02.02.02.02.02.02.02.02.02.02.02.02.52.52.52.52.52.52.52.52.52.52.52.52.52.52.52.52.52.52.52.52.52.52.52.53.03.03.03.03.03.03.0
8.49.49.9
10.411.412.513.614.615.716.817.819.020.021.022.023.024.125.226.227.228.429.430.431.432.733.734.735.737.038.039.040.042.543.544.547.549.550.553.054.055.058.059.060.061.063.065.066.068.070.071.073.075.078.079.0
+0.09-0.00
+0.11-0.00
+0.21-0.00
+0.25-0.00
+0.30-0.00
0.900.901.101.101.101.101.101.101.101.101.101.101.101.101.101.101.301.301.301.301.301.301.301.301.301.301.301.601.601.601.601.601.851.851.851.851.851.852.152.152.152.152.152.152.152.152.152.152.652.652.652.652.652.652.65
+0.14-0.00
0.60.60.60.60.60.80.90.91.11.21.21.51.51.51.51.51.71.81.81.82.12.12.12.12.62.62.62.63.03.03.03.03.83.83.83.83.83.84.54.54.54.54.54.54.54.54.54.54.54.54.54.54.54.54.5
0.200.200.200.200.200.300.300.300.400.400.400.500.500.500.500.500.600.600.600.600.700.700.700.700.900.900.900.901.001.001.001.001.301.301.301.301.301.301.501.501.501.501.501.501.501.501.501.501.501.501.501.501.501.501.50
0.110.170.220.240.300.340.390.450.480.540.590.610.720.750.840.861.201.211.331.351.551.641.741.872.201.982.132.882.933.232.983.544.635.375.215.886.136.318.018.728.919.449.75
10.369.56
11.1511.5911.7816.8017.7117.7217.6519.7020.6222.68
6200700093009700
107001170012700136001460015600166001750018500195002040021400269002800029200304003160032700339003510036250374003860049700511005260054100555005660058100595006370066600680008090082500841008900090600922009390097100
100000102000131000136000138000142000146000152000154000
620690730770840
11501500162020302470262034903680386040504240488055605790602073107570784081009900
105001090011200136001400014300147001940019900204002180022700232002910029700303003200032500331003370034800359003680037600387003930040400416004330043800
HC 1or
HD 1
HC 2or
HD 2
HA 3or
HB 3
D1300-8D1300-9D1300-9.5D1300-10D1300-11D1300-12D1300-13D1300-14D1300-15D1300-16D1300-17D1300-18D1300-19D1300-20D1300-21D1300-22D1300-23D1300-24D1300-25D1300-26D1300-27D1300-28D1300-29D1300-30D1300-31D1300-32D1300-33D1300-34D1300-35D1300-36D1300-37D1300-38D1300-40D1300-41D1300-42D1300-45D1300-47D1300-48D1300-50D1300-51D1300-52D1300-55D1300-56D1300-57D1300-58D1300-60D1300-62D1300-63D1300-65D1300-67D1300-68D1300-70D1300-72D1300-75D1300-76
Page 23
ARCON RING AND SPECIALTY CORPORATIONOver Thirty Years of Service 23
D1300
8 mm to 400 mm
Standard MaterialCarbon Spring Steel
Standard FinishPhosphate and oil
DIN 472
STANDARDMETRIC
INTERNALWhen Sprung onto Shaft When Sprung into Groove † Thrust load calculations see page 5
ARCO
N
AR ON
PARTNUMBER
BOREB
mm
CIRCLIPTHICKNESS FREE DIAMETER
t Tol. D Tol. C C1 L b hmm mm mm mm (max) ~ (min)
GROOVE DIAMETER WIDTH
G Tol. W Tol. n dmm mm mm mm (min) ~
APPROX Tc Tg PLIER
WT. KG / (N) (N) NO.1000PCS.
788082858890929598
100102105108110112115120125127130135140145150155160165170175180185190195200210220230240250260270280290300310320330340350360370380390400
2.502.502.503.003.003.003.003.003.003.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.004.005.005.005.005.005.005.005.005.005.005.006.006.006.006.006.006.006.006.006.006.00
+0.00-0.06
+0.00-0.075
+0.00-0.18
82.585.587.590.593.595.597.5
100.5103.5105.5108.0112.0115.0117.0119.0122.0127.0132.0135.0137.0142.0147.0152.0158.0164.0169.0174.5179.5184.5189.5194.5199.5204.5209.5222.0232.0242.0252.0262.0275.0285.0295.0305.0315.0327.0337.0347.0357.0367.0377.0387.0397.0407.0417.0
+1.30-0.54
+1.50-0.63
+1.70-0.72
+2.00-0.81
+2.20-1.00
60.062.064.066.869.871.873.676.479.081.082.685.688.088.290.093.097.0
102.0104.0107.0112.0117.0122.0125.0130.0133.0138.0145.0149.0153.0157.0162.0167.0171.0181.0191.0201.0211.0221.0227.0237.0247.0257.0267.0271.0281.0291.0301.0311.0321.0331.0341.0351.0361.0
64.066.568.571.374.376.378.180.983.585.587.690.693.093.295.098.0
102.0107.0109.0112.0116.0121.0126.0131.0136.0139.0144.0150.0155.0158.0162.0167.0172.0177.0188.0198.0208.0218.0228.0236.0246.0256.0266.0276.0282.0292.0302.0312.0322.0332.0342.0352.0362.0372.0
8.58.58.58.68.68.68.78.89.09.09.29.29.5
10.410.510.511.011.011.011.011.211.211.412.012.013.013.013.513.514.214.214.314.214.314.214.214.214.214.216.216.216.216.216.220.220.220.220.220.220.220.220.220.220.2
6.87.07.07.27.47.67.88.18.38.48.58.78.99.09.19.39.7
10.010.110.210.510.710.911.211.411.611.812.212.713.213.713.813.814.014.014.014.014.014.016.016.016.016.016.020.020.020.020.020.020.020.020.020.020.0
3.03.03.03.53.53.53.53.53.53.53.53.53.53.53.53.53.54.04.04.04.04.04.04.04.04.04.04.04.04.04.04.04.04.04.04.04.04.04.05.05.05.05.05.06.06.06.06.06.06.06.06.06.06.0
81.083.585.588.591.593.595.598.5
101.5103.5106.0109.0112.0114.0116.0119.0124.0129.0131.0134.0139.0144.0149.0155.0160.0165.0170.0175.0180.0185.0190.0195.0200.0205.0216.0226.0236.0246.0256.0268.0278.0288.0298.0308.0320.0330.0340.0350.0360.0370.0380.0390.0400.0410.0
+0.35-0.00
+0.54-0.00
+0.63-0.00
+0.72-0.00
+0.81-0.00
+0.89-0.00
2.652.652.653.153.153.153.153.153.153.154.154.154.154.154.154.154.154.154.154.154.154.154.154.154.154.154.154.154.154.154.154.154.154.155.155.155.155.155.155.155.155.155.155.156.206.206.206.206.206.206.206.206.206.20
+0.14-0.00
+0.18-0.00
+0.22-0.00
4.55.35.35.35.35.35.35.35.35.36.06.06.06.06.06.06.06.06.06.06.06.06.07.57.57.57.57.57.57.57.57.57.57.59.09.09.09.09.0
12.012.012.012.012.015.015.015.015.015.015.015.015.015.015.0
1.501.801.801.801.801.801.801.801.801.802.002.002.002.002.002.002.002.002.002.002.002.002.002.502.502.502.502.502.502.502.502.502.502.503.003.003.003.003.004.004.004.004.004.005.005.005.005.005.005.005.005.005.005.00
22.4621.3822.2731.7832.9433.3535.7238.8842.1643.4155.2059.2062.6071.7570.6873.1680.4081.2080.8085.1394.7998.61
106.50106.80128.00130.50132.00149.50158.50168.00177.50184.00189.60196.00263.00276.00291.00304.00318.50385.00401.50417.50433.40446.00658.50682.00705.00729.00752.50769.00793.00817.00838.50862.50
158000162000166000206000214000218000223000231000238000243000330000340000350000356000362000372000388000405000411000421000437000453000496000485000502000518000534000550000566000583000599000615000631000647000739000774000809000845000880000915000950000985000102000010600001310000135000013900001440000148000015200001560000169000016460001689000
4500053900553005720059200605006190063800658006710078400807008300084500860008820092000958009730099500
103000107000111000144000148000153000158000163000167000172000177000181000186000191000241000252000264000275000286000398000413000428000443000458000594000613000632000650000669000688000707000726000745000764000
HC 3or
HD 3
HC 4or
HD 4
MAJOR77
MAJORX 77
D1300-78D1300-80D1300-82D1300-85D1300-88D1300-90D1300-92D1300-95D1300-98D1300-100D1300-102D1300-105D1300-108D1300-110D1300-112D1300-115D1300-120D1300-125D1300-127D1300-130D1300-135D1300-140D1300-145D1300-150D1300-155D1300-160D1300-165D1300-170D1300-175D1300-180D1300-185D1300-190D1300-195D1300-200D1300-210D1300-220D1300-230D1300-240D1300-250D1300-260D1300-270D1300-280D1300-290D1300-300D1300-310D1300-320D1300-330D1300-340D1300-350D1300-360D1300-370D1300-380D1300-390D1300-400
Page 24
** IItt iiss rreeccoommmmeennddeedd tthhaatt tthhee ttoolleerraannccee oonn GGrroooovvee DDiiaammeetteerr iiss rreessttrriicctteedd,, wwhheerree nneecceessssaarryy,,ttoo mmaaiinnttaaiinn tthhee mmiinniimmuumm ggrroooovvee ddeepptthh qquuootteedd wwhheenn uussiinngg sshhaaffttss ssmmaalllleerr tthhaann nnoommiinnaall..
RINGTHICKNESS
t Tol. C C1inches inches
PARTNUMBER
GROOVE DIAMETER WIDTH
G Tol. W Tol.inches inches inches inches
Tc † Tg † APPLI-(lb.f) (lb.f) CATOR
1/8
5/32
3/16
3/16
7/32
7/32
7/32
1/4
1/4
1/4
17/64
9/32
5/16
3/8
1/2
9/16
5/8
.125
.156
.188
.188
.219
.219
.219
.250
.250
.250
.266
.281
.313
.375
.500
.563
.625
+.005-.015
+.010-.015
-.015
.032dia
.032sq
.036dia
.032sq
.048sq
.048dia
.032sq
.040sq
.032sq
.032dia
.040sq
.048dia
.040sq
.040sq
.056sq
.064sq
.064sq
±.002
.31
.36
.45
.40
.51
.51
.48
.48
.48
.48
.54
.56
.57
.69
.871.031.12
.34
.39
.49
.44
.55
.55
.53
.54
.54
.54
.59
.61
.63
.74
.941.11.2
.075
.115
.130
.140
.150
.150
.170
.195
.200
.200
.210
.220
.255
.330
.435
.500
.560
+.005-.000
+.010-.005
+.015-.010
.036
.036
.040
.036
.052
.052
.036
.044
.036
.036
.044
.052
.044
.044
.060
.068
.068
+.003-.000
+.004-.000
338434603532962962600915723700978
120011601400268034803880
7063
13984
190190104150125125165203209153411383452
40414243444546474748495051515253A54A
SHAFTDIAMETER S
Frac. Dec. Tol.inches inches inches
1200-71200-111200-131200-141200-151200-15R1200-171200-191200-211200-21R1200-221200-231200-251200-341200-431200-521200-57
† Thrust load calculations see page 5
ARCO
N
AR ON ARCON RING AND SPECIALTY CORPORATIONOver Thirty Years of Service
24
1200
.125” to .625”
Standard MaterialCarbon Spring Steel
Standard FinishSelf Finish and oil
PLAINWIRE RING
When Sprung into Groove
1000
0.062” to 3.00”
Standard MaterialCarbon Spring Steel
Standard FinishPhosphate and oil
ROUNDSECTION
SHAFTDIAMETER S
Frac. Dec.inch inch
RING MATERIAL DIAM. MAX.FREE DIAM. MIN.RING CLEAR
t D Cinches inches inches
GROOVE DIAMETER WIDTH RADIUS
G Tol. W Tol. rinches inches inches inches inches
PARTNUMBER
1/161/123/321/101/85/323/167/321/49/325/1611/323/8
13/327/16
15/321/2
9/165/8
11/163/4
13/167/8
15/16
111/16
11/8
11/4
13/8
11/2
15/8
13/4
17/8
221/8
21/4
23/8
21/2
25/8
23/4
27/8
3
0.0620.0830.0940.1000.1250.1560.1870.2190.2500.2810.3120.3440.3750.4060.4380.4690.5000.5620.6250.6880.7500.8120.8750.9381.0001.0621.1251.2501.3751.5001.6251.7501.8752.0002.1252.2502.3752.5002.6252.7502.8753.000
0.00920.00920.01080.01080.01240.01240.01240.01480.02200.02200.02200.02200.03600.03600.03600.03600.04800.04800.04800.04800.06400.06400.06400.06400.06400.08000.08000.08000.08000.08000.08000.08000.10400.10400.10400.10400.10400.10400.12800.12800.12800.1280
0.0510.0720.0800.0870.1100.1380.1690.1980.2210.2510.2810.3120.3290.3590.3900.4200.4380.4980.5600.6210.6650.7260.7860.8480.9080.9531.0121.1351.2581.3801.5001.6211.7201.8401.9602.0822.2032.3242.4252.5432.6642.785
0.0900.1110.1250.1320.1510.1910.2220.2580.3040.3460.3670.4000.4570.4890.5200.5520.6060.6680.7310.7940.8880.9501.0131.0761.1381.2321.2951.4201.5451.6701.7951.9202.0932.2182.3432.4682.5932.7182.8913.0163.1413.266
0.0520.0730.0820.0890.1130.1430.1740.2040.2280.2590.2900.3220.3390.3700.4020.4330.4520.5140.5770.6400.6860.7480.8110.8740.9360.9821.0451.1701.2951.4201.5451.6701.7711.8962.0212.1462.2712.3962.4972.6222.7472.872
+.003-.000
+.004-.000
+.005-.000
+.007-.000
0.0100.0100.0110.0110.0130.0130.0130.0150.0230.0230.0230.0230.0380.0380.0380.0380.0500.0500.0500.0500.0670.0670.0670.0670.0670.0830.0830.0830.0830.0830.0830.0830.1090.1090.1090.1090.1090.1090.1330.1330.1330.133
+.003-.000
+.004-.000
+.005-.000
+.007-.000
0.00500.00500.00550.00550.00650.00650.00650.00750.01150.01150.01150.01150.01870.01870.01870.01870.02500.02500.02500.02500.03350.03350.03350.03350.03350.04150.04150.04150.04150.04150.04150.04150.05450.05450.05450.05450.05450.05450.06650.06650.06650.0665
1000-61000-81000-91000-101000-121000-151000-181000-211000-251000-281000-311000-341000-371000-401000-431000-461000-501000-561000-621000-681000-751000-811000-871000-931000-1001000-1061000-1121000-1251000-1371000-1501000-1621000-1751000-1871000-2001000-2121000-2251000-2371000-2501000-2621000-2751000-2871000-300
Page 25
ARCO
N
AR ONARCON RING AND SPECIALTY CORPORATIONOver Thirty Years of Service 25
3200
30mm to 240mm
Standard MaterialCarbon Spring Steel
Standard FinishPhosphate and oil
DIN 5417
WIRE EXTERNAL RINGSFOR BEARING RETENTION
When Sprung into Groove
† Thrust load calculations see page 5
ARCO
N
AR ON
BEARINGS
mm
PARTNUMBER
CIRCLIPTHICKNESS FREE DIAMETER
t Tol. D Tol. a Tol. C1 A rmm mm mm mm ~ (min)
GROOVE DIAMETER WIDTH
G Tol. W Tol.mm mm mm mm
BEARING NO.LIGHT MEDIUM HEAVYTc†
(N)
30323537404244475052555658626568727580859095
100110115120125130140145150160170180190200210215225230240
1.121.121.121.121.121.121.121.121.121.121.121.121.121.701.701.701.701.701.701.702.462.462.462.462.462.822.822.822.822.822.822.823.103.103.103.103.103.103.503.503.50
+0.00-0.10
27.429.432.434.037.338.940.943.746.748.851.752.454.458.261.263.467.470.475.480.485.490.495.2
105.2110.2113.6118.6123.6133.0138.0142.9152.9161.3171.2181.0191.0200.9205.9214.3219.2229.2
+0.40-0.00
+0.50-0.00
+0.80-0.00
+1.00-0.00
+1.60-0.00
+1.80-0.00
3.253.253.253.253.253.253.254.044.044.044.044.044.044.044.044.854.854.854.854.854.854.854.854.854.857.217.217.217.217.217.217.219.609.609.609.609.609.60
10.0010.0010.00
+0.00-0.15
34.736.739.741.344.646.348.352.755.757.960.761.763.767.770.774.678.681.686.691.696.5
101.6106.5116.6121.6129.7134.7139.7149.7154.7159.7169.7182.9192.9202.9212.9222.8227.8237.0242.0252.0
33333334444444455555555557777777
101010101010101010
0.40.40.40.40.40.40.40.40.40.40.40.40.40.60.60.60.60.60.60.60.70.70.70.70.70.70.70.70.70.70.70.70.70.70.70.71.21.21.21.21.2
28.1730.1533.1734.7738.1039.7541.7544.6047.6049.7352.6053.6055.6059.6162.6064.8268.8171.8376.8181.8186.7991.8296.80
106.81111.81115.21120.22125.22135.23140.23145.24155.22163.65173.66183.64193.65203.60208.60217.00222.00232.00
+0.00-0.25
+0.00-0.50
1.351.351.351.351.351.351.351.351.351.351.351.351.351.901.901.901.901.901.901.902.702.702.702.702.703.103.103.103.103.103.103.103.503.503.503.503.503.504.504.504.50
+0.30-0.00
+0.40-0.00
2300024500268002830030600321003370036000383004000042100429004440072000755007900083600871009300098700
151000160000168000150000193000231000241000250000270000279000289000308000360000381000402000424000445000455000538000550000574000
620062016202
–6203
––
6204–
6205–––
6206––
6207–
620862096210
–62116212
–6213621462156216
–621762186219622062216222
–6224
–6226
–
––
63006301
–6302
–6303
–6304
–––
6305––
6306–
6307–
6308–
63096310
–6311
–63126313
–631463156316631763186319
–63206321
–6322
–––––––––––––
6403––
6404–
6405–
6406–
64076408
–6409
–64106411
–64126413
–64146415641664517
–6418
––
3200-303200-323200-353200-373200-403200-423200-443200-473200-503200-523200-553200-563200-583200-623200-653200-683200-723200-753200-803200-853200-903200-953200-1003200-1103200-1153200-1203200-1253200-1303200-1403200-1453200-1503200-1603200-1703200-1803200-1903200-2003200-2103200-2153200-2253200-2303200-240
Page 26
ARCON RING AND SPECIALTY CORPORATIONOver Thirty Years of Service
26
0.125” to 3.00”
Standard MaterialCarbon Spring Steel
Obtainable inBronze, Beryllium Copper,
and Stainless Steel
ROUNDSECTION
EXTERNAL
XRC900
XRO800
TOLERANCES:Tolerances on “D” and “O”dimensions are minus as follows:
1/8” to 3/8” sizes 6%7/16” to 1” sizes 5%11/16” to 3” sizes 4%
of respective “D” dimension.
Tolerance on “t” (thickness)dimensions are as follows:
.022 to .250 sizes ± .002
ARCO
N
AR ON
OPEN TYPE XROPART STANDARD GAP RING DIMENSIONS
NUMBER O D tdimension
APPROXWT. LB/
1000 PCS.
CLOSED TYPE XRCPART SHAFT DIAMETER RING DIMENSIONS GROOVE DIMENSIONS
NUMBER S S D t A B(frac) (dec) Width Depth
APPROXWT. LB/
1000 PCS.1/8
5/323/167/321/49/325/165/163/83/8
7/167/161/21/2
9/169/165/85/8
11/1611/163/43/4
13/1613/16
7/87/8
15/1615/16
11
11/16
11/16
11/8
11/8
13/16
13/16
11/4
11/4
15/16
15/16
13/8
13/8
17/16
17/16
11/2
11/2
15/8
15/8
13/4
13/4
22
21/4
21/4
21/2
21/2
33
.125
.156
.188
.219
.250
.281
.312
.312
.375
.375
.438
.438
.500
.500
.562
.562
.625
.625
.688
.688
.750
.750
.812
.812
.875
.875
.938
.9381.0001.0001.0631.0631.1251.1251.1881.1881.2501.2501.3121.3121.3751.3751.4381.4381.5001.5001.6251.6251.7501.7502.0002.0002.2502.2502.5002.5003.0003.000
.110
.140
.172
.202
.230
.260
.296
.288
.353
.345
.412
.402
.468
.458
.529
.518
.587
.575
.649
.637
.706
.690
.769
.753
.823
.804
.885
.867
.938
.9171.000.979
1.0511.0341.1141.0961.1641.1501.2261.2121.2811.2641.3441.3261.3981.3781.5221.5021.6261.6081.8551.8372.1032.0852.3322.3212.8272.816
.022
.022
.022
.022
.029
.029
.022
.035
.029
.043
.035
.051
.043
.059
.045
.062
.051
.071
.051
.071
.059
.085
.059
.085
.071
.100
.071
.100
.085
.118
.085
.118
.100
.130
.100
.130
.118
.140
.118
.140
.130
.156
.130
.156
.140
.172
.140
.172
.172
.203
.203
.232
.203
.232
.232
.250
.232
.250
.024
.024
.024
.024
.031
.031
.024
.037
.031
.045
.037
.053
.045
.061
.047
.064
.053
.073
.053
.073
.061
.087
.061
.087
.073
.102
.073
.102
.087
.120
.087
.120
.102
.132
.102
.132
.120
.142
.120
.142
.132
.158
.132
.158
.142
.174
.142
.174
.174
.205
.205
.234
.205
.234
.234
.252
.234
.252
.007
.007
.007
.007
.009
.009
.007
.011
.009
.013
.011
.016
.013
.018
.014
.019
.016
.022
.016
.022
.018
.026
.018
.026
.022
.031
.022
.031
.026
.037
.026
.037
.031
.040
.031
.040
.037
.044
.037
.044
.040
.049
.040
.049
.044
.054
.044
.054
.054
.063
.063
.072
.063
.072
.072
.078
.072
.078
.04
.05
.07
.09
.15
.17
.11
.27
.22
.50
.38
.82
.661.25
.811.551.152.261.272.481.853.892.004.213.136.283.356.725.26
10.016.86
10.618.00
13.678.44
14.4012.4017.5713.0018.4116.5624.0117.3125.0620.9531.8622.6334.4136.9651.8558.9377.3866.0386.6595.89
111.60114.40133.20
XRO 411XRO 412XRO 413XRO 414XRO 415XRO 4155XRO 416XRO 417XRO 418XRO 419XRO 420XRO 421XRO 422XRO 423XRO 424XRO 425XRO 426XRO 427XRO 428XRO 429XRO 430XRO 431XRO 432XRO 433XRO 434XRO 435XRO 436XRO 437XRO 438XRO 439XRO 440XRO 441XRO 442XRO 443XRO 444XRO 445XRO 446XRO 447XRO 448XRO 449XRO 450XRO 451XRO 452XRO 453XRO 454XRO 455XRO 456XRO 457XRO 458XRO 459XRO 460XRO 461XRO 462XRO 463XRO 464XRO 465XRO 466XRO 467
.097
.123
.152
.178
.203
.229
.261
.254
.322
.304
.363
.355
.412
.404
.467
.457
.518
.507
.572
.562
.623
.609
.678
.664
.726
.709
.780
.764
.827
.809
.882
.863
.927
.912
.983
.9671.0271.0141.0811.0691.1301.1151.1851.1701.2331.2151.3421.3251.4341.4181.6361.6201.8551.8392.0572.0472.4942.483
.110
.140
.172
.202
.230
.260
.296
.288
.353
.345
.412
.402
.468
.458
.529
.518
.587
.575
.649
.637
.706
.690
.769
.753
.823
.804
.885
.867
.938
.9171.000
.9791.0511.0341.1141.0961.1641.1501.2261.2121.2811.2641.3441.3261.3981.3781.5221.5021.6261.6081.8551.8372.1032.0852.3322.3212.8272.816
.022
.022
.022
.022
.029
.029
.022
.035
.029
.043
.035
.051
.043
.059
.045
.062
.051
.071
.051
.071
.059
.085
.059
.085
.071
.100
.071
.100
.085
.118
.085
.118
.100
.130
.100
.130
.118
.140
.118
.140
.130
.156
.130
.156
.140
.172
.140
.172
.172
.203
.203
.232
.203
.232
.232
.250
.232
.250
.03.04.05.06.10.12.07.18.14.33.26.53.44.82.53
1.02.75
1.48.83
1.681.212.551.312.762.054.122.204.313.456.574.506.965.258.975.549.457.77
11.538.53
12.0810.8715.7518.3616.4313.7520.9114.8522.5824.2534.0438.6750.7943.3456.8862.8973.2275.0987.32
XRC 311XRC 312XRC 313XRC 314XRC 315XRC 3155XRC 316XRC 317XRC 318XRC 319XRC 320XRC 321XRC 322XRC 323XRC 324XRC 325XRC 326XRC 327XRC 328XRC 329XRC 330XRC 331XRC 332XRC 333XRC 334XRC 335XRC 336XRC 337XRC 338XRC 339XRC 340XRC 341XRC 342XRC 343XRC 344XRC 345XRC 346XRC 347XRC 348XRC 349XRC 350XRC 351XRC 352XRC 353XRC 354XRC 355XRC 356XRC 357XRC 358XRC 359XRC 360XRC 361XRC 362XRC 363XRC 364XRC 365XRC 366XRC 367
Page 27
ARCON RING AND SPECIALTY CORPORATIONOver Thirty Years of Service
27
0.125” to 3.00”
Standard MaterialCarbon Spring Steel
Obtainable inBronze, Beryllium Copper,and Stainless Steel
XSC700
XSO600
SQUARESECTION
EXTERNAL
APPROXWT. LB/
1000 PCS.
TOLERANCES:Tolerances on “D” and “O”dimensions are minus as follows:
1/8” to 3/8” sizes 6%7/16” to 1” sizes 5%11/16” to 3” sizes 4%
of respective “D” dimension.
Tolerance on “t” (thickness)dimensions are as follows:
.020 to .025 sizes +.003-.002
.031 to .046 sizes +.005-.004
.055 to .312 sizes +.006-.004
ARCO
N
AR ON
CLOSED TYPE XSCPART SHAFT DIAMETER RING DIMENSIONS GROOVE DIMENSIONS
NUMBER S S D t A B(frac) (dec) Width Depth
APPROXWT. LB/
1000 PCS.
OPEN TYPE XSOPART STANDARD GAP RING DIMENSIONS
NUMBER O D tdimension
1/85/323/163/167/321/41/49/325/165/163/83/87/167/161/21/29/169/165/85/8
11/1611/163/43/4
13/1613/167/87/8
15/1615/16
11
11/16
11/16
11/8
11/8
13/16
13/16
11/4
11/4
15/16
15/16
13/8
13/8
17/16
17/16
11/2
11/2
15/8
15/8
13/4
13/4
22
21/4
21/4
21/2
21/2
33
.125
.156
.188
.188
.219
.250
.250
.281
.312
.312
.375
.375
.438
.438
.500
.500
.562
.562
.625
.625
.688
.688
.750
.750
.812
.812
.875
.875
.938
.9381.0001.0001.0631.0631.1251.1251.1881.1881.2501.2501.3121.3121.3751.3751.4381.4381.5001.5001.6251.6251.7501.7502.0002.0002.2502.2502.5002.5003.0003.000
.114
.145
.175
.173
.203
.236
.232
.261
.293
.289
.353
.347
.413
.405
.471
.463
.525
.521
.591
.579
.653
.641
.712
.697
.773
.759
.831
.813
.893
.875
.950
.9291.012.990
1.0681.0441.1301.1061.1841.1601.2461.2221.3041.2761.3641.3381.4241.3921.5471.5161.6571.6241.8871.8552.1342.1032.3502.3212.8452.816
.020
.020
.020
.025
.025
.025
.031
.031
.031
.039
.035
.046
.039
.055
.046
.062
.062
.071
.055
.078
.055
.078
.062
.093
.062
.093
.071
.109
.071
.109
.078
.125
.078
.125
.093
.140
.093
.140
.109
.156
.109
.156
.120
.172
.120
.172
.125
.187
.125
.187
.156
.218
.187
.250
.187
.250
.250
.312
.250
.312
.024
.024
.024
.029
.029
.030
.036
.036
.036
.045
.041
.052
.045
.062
.052
.069
.069
.078
.062
.085
.062
.085
.069
.100
.069
.100
.078
.117
.078
.117
.085
.133
.085
.133
.100
.148
.100
.148
.117
.164
.117
.164
.128
.180
.128
.180
.133
.195
.133
.195
.164
.227
.195
.260
.195
.260
.265
.327
.265
.327
.005
.005
.005
.006
.006
.006
.008
.008
.008
.010
.009
.012
.010
.014
.012
.016
.016
.018
.014
.020
.014
.020
.016
.023
.016
.023
.018
.027
.018
.027
.020
.031
.020
.031
.023
.035
.023
.035
.027
.039
.027
.039
.030
.043
.030
.043
.031
.047
.031
.047
.039
.055
.047
.063
.047
.063
.063
.078
.063
.078
.05
.06
.07
.11
.12
.14
.22
.24
.28
.44
.42
.74
.511.23
.971.792.002.641.733.541.893.872.636.042.846.524.029.694.30
10.345.53
14.555.87
15.418.88
20.539.36
21.6113.5928.3414.2829.6718.5637.8918.9039.5121.4048.8523.1252.6839.0477.4464.16
116.4071.81
130.10143.80227.60171.10270.30
XSO 211XSO 2125XSO 212XSO 213XSO 2135XSO 214XSO 215XSO 2155XSO 216XSO 217XSO 218XSO 219XSO 220XSO 221XSO 222XSO 223XSO 224XSO 225XSO 226XSO 227XSO 228XSO 229XSO 230XSO 231XSO 232XSO 233XSO 234XSO 235XSO 236XSO 237XSO 238XSO 239XSO 240XSO 241XSO 242XSO 243XSO 244XSO 245XSO 246XSO 247XSO 248XSO 249XSO 250XSO 251XSO 252XSO 253XSO 254XSO 255XSO 256XSO 257XSO 258XSO 259XSO 260XSO 261XSO 262XSO 263XSO 264XSO 265XSO 266XSO 267
.101
.128
.154
.153
.179
.208
.205
.230
.258
.255
.311
.305
.364
.357
.414
.408
.463
.460
.521
.511
.576
.565
.628
.615
.682
.669
.732
.717
.787
.771
.838
.819
.893
.873
.940
.921
.997
.9751.0441.0231.0991.0781.1501.1251.2031.1801.2561.2281.3641.3371.4611.4321.6641.6361.8821.8552.0732.0472.5102.483
.114
.145
.175
.173
.203
.236
.232
.261
.293
.289
.353
.347
.413
.405
.471
.463
.525
.521
.591
.579
.653
.641
.712
.697
.773
.759
.831
.813
.893
.875
.950
.9291.012
.9901.0681.0441.1301.1061.1841.1601.2461.2221.3041.2761.3641.3381.4241.3921.5471.5161.6571.6241.8871.8552.1342.1032.3502.3212.8452.816
.020
.020
.020
.025
.025
.025
.031
.031
.031
.039
.035
.046
.039
.055
.046
.062
.062
.071
.055
.078
.055
.078
.062
.093
.062
.093
.071
.109
.071
.109
.078
.125
.078
.125
.093
.140
.093
.140
.109
.156
.109
.156
.120
.172
.120
.172
.125
.187
.125
.187
.156
.218
.187
.250
.187
.250
.250
.312
.250
.312
.03
.04
.05
.07
.08
.09
.14
.16
.18
.29
.28
.49
.33
.81
.641.181.311.731.142.321.242.541.773.961.864.282.646.362.826.793.639.553.85
10.105.84
13.476.14
14.188.92
18.609.37
18.8112.1824.8712.4025.9314.0432.0515.1834.5225.6350.8342.1276.4147.1285.4094.31
149.40112.30177.40
XSC 111XSC 1125XSC 112XSC 113XSC 1135XSC 114XSC 115XSC 1155XSC 116XSC 117XSC 118XSC 119XSC 120XSC 121XSC 122XSC 123XSC 124XSC 125XSC 126XSC 127XSC 128XSC 129XSC 130XSC 131XSC 132XSC 133XSC 134XSC 135XSC 136XSC 137XSC 138XSC 139XSC 140XSC 141XSC 142XSC 143XSC 144XSC 145XSC 146XSC 147XSC 148XSC 149XSC 150XSC 151XSC 152XSC 153XSC 154XSC 155XSC 156XSC 157XSC 158XSC 159XSC 160XSC 161XSC 162XSC 163XSC 164XSC 165XSC 166XSC 167
Page 28
ARCON RING AND SPECIALTY CORPORATIONOver Thirty Years of Service
28
TRC
0.188” to 1.00”
Standard MaterialCarbon Spring Steel
Obtainable inBronze, Beryllium Copper,and Stainless Steel
RECTANGULARSECTION
EXTERNAL
SECTION:On request, listed sections may becoiled to meet any shaft or housingdiameter requirements. eg. (1” shaftdia.(s) X .045 x.025 section (w-t).4” limit on “O” diameterGAP:(Trc type) butted to approximately 1/2wire section dimension.TOLERANCES:Tolerances on “D” dimensions are minusas follows:
3/16” to 3/8”sizes 6%13/32” to 1” sizes 5%
Tolerances on “t” (thickness) dimensionare as follows:
.015 to .025 sizes ±5%
.035 to .042 sizes ±4%
ARCO
N
AR ON
PARTNUMBER
SHAFTDIAMETER S
Frac. Dec.inch inch
RING DIAMETER WIDTH THICKNESS
INSIDE Outside W tD O inches inches
GROOVEDIMENSIONS
A BWidth Depth
APPROXWT. LB/
1000 PCS.3/167/321/49/325/1611/323/8
13/327/16
15/321/2
9/1619/325/8
11/163/4
13/167/8
15/16
1
.188
.219
.250
.281
.312
.344
.375
.406
.438
.469
.500
.562
.594
.625
.688
.750
.812
.875
.9381.000
.176
.205
.230
.261
.290
.322
.351
.382
.412
.443
.474
.534
.565
.596
.656
.715
.776
.833
.896
.955
.226
.255
.300
.331
.370
.402
.431
.472
.502
.533
.570
.630
.685
.716
.776
.855
.916
.9731.0581.117
.025
.025
.035
.035
.040
.040
.040
.045
.045
.045
.048
.048
.060
.060
.060
.070
.070
.070
.081
.081
.015
.015
.025
.025
.025
.025
.025
.025
.025
.025
.035
.035
.035
.035
.042
.042
.042
.042
.042
.042
.017
.017
.028
.028
.028
.028
.028
.028
.028
.028
.039
.039
.039
.039
.046
.046
.046
.046
.046
.046
.007
.007
.010
.010
.011
.011
.012
.012
.013
.013
.013
.014
.0145
.0145
.016
.0175
.018
.021
.021
.0225
.07
.08
.20
.23
.29
.32
.35
.42
.45
.48
.78
.901.201.301.702.102.202.302.903.00
TRC 813TRC 814TRC 815TRC 816TRC 817TRC 818TRC 819TRC 820TRC 821TRC 822TRC 823TRC 824TRC 825TRC 826TRC 827TRC 828TRC 829TRC 830TRC 831TRC 832
Rectangle Wire"Constant Section Rings"
SPIRALRINGS
INTERNAL RINGS
EXTERNAL RINGS
0.500” to 16.00”
Standard MaterialCarbon Spring Steel
Obtainable in302,316 Stainless Steel
LIGHT DUTY SERIES MEDIUM DUTY SERIES MEDIUM HEAVY DUTY SERIES HEAVY DUTY SERIES
Page 29
SHAFTDIAMETER S
Frac. Dec. mm
RING FREE DIAMETER WIRE SECTION
D Tol. W Tinches inches ±.005 ±.002
GROOVE DIA. WIDTH NOM.C A DEPTH
B
NOTCH DEPTH WIDTH
ND NW+.000 Ref.-.030
+.005-.000
+.005-.000
+.005-.000
PARTNUMBER
GAP
G TOL.
±1/16"
SAFE
WORKING
THRUST
LOAD
ARCON RING AND SPECIALTY CORPORATIONOver Thirty Years of Service
EN
Applicable Shaft2.062" to 5.00"
Standard MaterialCarbon Spring Steel
EXTERNALNOTCHED
RINGS
ARCO
N
AR ON
SHAFTDIAMETER S
Frac. Dec. mminch inch
RING FREE DIAMETER WIRE SECTION
D Tol. W Tinches inches ±.005 ±.002
GROOVE DIA. WIDTH NOM.C A DEPTH
B
NOTCH DEPTH WIDTH
ND NW+.000 Ref.-.030
+.005-.000
+.005-.000
PARTNUMBER
SAFE
WORKING
THRUST
LOAD
21/16
21/8
25/32
21/4
25/16
23/8
27/16
21/2
–25/8
211/16
23/4
27/8
215/16
331/16
31/8
35/32
31/4
311/32
37/16
31/2
–35/8
311/16
33/4
37/8
315/16
441/4
43/8
41/2
43/4
5
2.0622.1252.1562.2502.3122.3752.4382.5002.5592.6252.6882.7502.8752.9383.0003.0623.1253.1563.2503.3463.4383.5003.5433.6253.6883.7503.8753.9384.0004.2504.3754.5004.7505.000
52.3753.9854.7657.1558.7360.3361.9363.5065.0066.6868.2869.8573.0374.6376.2077.7779.3880.1682.5585.0087.3388.9090.0092.0893.6895.2598.43
100.03101.60107.95111.13114.30120.65127.00
1.9261.9832.0122.1002.1582.2192.2792.3402.3992.4612.5212.5772.6962.7542.8132.8732.9322.9613.0513.1413.2323.2863.3273.4053.4633.5223.6433.7043.7624.0254.1504.2704.5104.750
+.000-.060
+.000-.080
+.000-.093
.187
.203
.218
.250
.281
.312
.078
.093
.109
1.9462.0032.0322.1202.1782.2392.2992.3602.4192.4812.5412.6022.7212.7792.8382.8982.9572.9863.0763.1663.2573.3163.3573.4353.4933.5523.6733.7343.7924.0654.1904.3104.5504.790
.086
.103
.120
.058
.061
.062
.065
.067
.068
.069
.070
.070
.072
.073
.074
.077
.079
.081
.082
.084
.085
.087
.090
.090
.092
.093
.095
.097
.099
.101
.102
.104
.092
.092
.095
.100
.105
.375
.500
.562
.625
.093
.100
.110
.125
.150
.180
.125
54005530568062006580687071307430759080208320865093309840
1031010530111701137012000128101310013640140001458014650158001660017040176401660017100182301916022280
+.005-.000
29
EN206EN212EN215EN225EN231EN237EN243EN250EN255EN262EN268EN275EN287EN293EN300EN306EN312EN315EN325EN334EN343EN350EN354EN362EN368EN375EN387EN393EN400EN425EN437EN450EN475EN500
Page 30
ARCON RING AND SPECIALTY CORPORATIONOver Thirty Years of Service
XAN
Applicable Shaft0.312" to 1.875"
Standard MaterialCarbon Spring Steel
EXTERNALRETAINING
RINGS
ARCO
N
AR ON
SHAFTDIAMETER S
Frac. Dec. mminch inch
RING FREE DIAMETER WIRE SECTION
D Tol. W Tinches inches ±.005 ±.002
.156 ±.005
PARTNUMBER
XAN31XAN34XAN35XAN37XAN39XAN40XAN43XAN46XAN50XAN55XAN56XAN59XAN62XAN66XAN68XAN75XAN78XAN81XAN87XAN93XAN98XAN100XAN102XAN106XAN112XAN118XAN125XAN131XAN137XAN143XAN150XAN156XAN162XAN168XAN175XAN177XAN181XAN187
5/1611/32
–3/8
–13/327/16
15/321/2
–9/16
19/325/8
–11/163/4
25/3213/16
7/815/1663/64
1–
11/16
11/8
13/16
11/4
15/16
13/8
17/16
11/2
19/16
15/8
111/16
13/4
–113/16
17/8
.312
.344
.354
.375
.393
.406
.438
.469
.500
.551
.562
.594
.625
.669
.688
.750
.781
.812
.875
.938
.9841.0001.0231.0621.1251.1881.2501.3121.3751.4381.5001.5621.6251.6871.7501.7711.8121.875
7.928.748.999.539.98
10.3111.1311.9112.7014.0014.2715.0915.8817.0017.4819.0519.8420.6222.2323.8325.0025.4025.9826.9728.5830.1831.7533.3234.9336.5338.1039.6741.2842.8544.4544.9846.0247.63
.281
.312
.320
.341
.359
.372
.402
.433
.464
.514
.524
.555
.586
.630
.644
.703
.733
.764
.820
.881
.925
.941
.9621.0001.0601.1211.1791.2321.2911.3511.4081.4671.5271.5811.6401.6571.6981.759
+.000-.015
+.000-.020
+.000-.025
+.000-.031
+.000-.046
.040±.003
.048±.003
.062±.003
.078±.003
.093±.003
.109±.003
.125±.005
.141±.005
.025
.035
.042
.050
.062
.290
.322
.330
.351
.369
.382
.412
.443
.474
.524
.534
.566
.597
.640
.656
.716
.745
.776
.835
.896
.940
.956
.9771.0161.0751.1361.1941.2501.3091.3701.4301.4901.5511.6111.6701.6871.7281.789
±.002
±.003
±.004
.028
.039
.046
.056
.068
.011
.012
.013
.014
.015
.016
.017
.018
.020
.021
.022
.023
.025
.026
.028
.031
.033
.034
.035
.036
.037
.038
.040
.042
.042
.043
.031
.062
.093
.156
.156
.156
.218
.250
.312
.375
180190210230260280300320460480490510520570700820950
101011001130117012001300160018801990209021002300246025003060319033703510355036403760
+.004-.000
+.004-.000
+.003-.000
+.003-.000
+.003-.000
RING
THRUST
CAPACITY
LBS.
FREE GAP
MIN. MAX.
GROOVE DIA. WIDTH NOM.
C Tol. A DEPTH
B
30
Page 31
ARCON RING AND SPECIALTY CORPORATIONOver Thirty Years of Service
XAN
Applicable Shaft1.969" to 10.00"
Standard MaterialCarbon Spring Steel
EXTERNALRETAINING
RINGS
ARCO
N
AR ON
SHAFTDIAMETER S
Frac. Dec. mminch inch
RING FREE DIAMETER WIRE SECTION
D Tol. W Tinches inches ±.005 ±.002
PARTNUMBER
131/32
221/16
21/8
25/32
21/4
25/16
23/8
27/16
21/2
–25/8
211/16
23/4
27/8
215/16
331/16
31/8
35/32
31/4
311/32
37/16
31/2
–35/8
311/16
33/4
37/8
315/16
441/4
43/8
41/2
43/4
551/4
51/2
53/4
–6
61/4
61/2
63/4
771/4
71/2
881/2
991/4
91/2
10
1.9692.0002.0622.1252.1562.2502.3122.3752.4372.5002.5592.6252.6872.7502.8752.9373.0003.0623.1253.1563.2503.3443.4373.5003.5433.6253.6873.7503.8753.9384.0004.2504.3754.5004.7505.0005.2505.5005.7505.9006.0006.2506.5006.7507.0007.2507.5008.0008.5009.0009.2509.500
10.000
48.9950.8052.3753.9854.7657.1558.7260.3361.9063.5065.0066.6868.2569.8573.0374.6076.2077.7779.3880.1682.5584.9487.3088.9090.0092.0893.6595.2598.43
100.02101.60107.95111.13114.30120.65127.00133.35139.70146.05149.86152.40158.75165.10171.45177.80184.15190.50203.20215.90228.60234.95241.30254.00
1.8491.8801.9361.9972.0262.1162.1742.2352.2952.3562.4132.4752.5352.5942.7132.7712.8302.8902.9512.9803.0703.1603.2513.3053.3463.4233.4823.5413.6573.7133.7714.0164.1414.2554.4954.7304.9705.2065.4465.6005.6875.9166.1516.3866.6216.8407.0907.5608.0508.5458.8009.0409.535
+.000.046
+.000-.062
+.000-.078
+.000-.093
+.000-.125
+.000-.125
+.000-.156
.156±.005
.187±.005
.218±.005
.250±.005
.281±.005
.312±.005
.375±.005
.437±.005
.500±.005
.062
.078
.093
.109
.125
.156
.187
1.8791.9101.9662.0272.0562.1462.2042.2652.3252.3862.4432.5052.5652.6242.7432.8012.8602.9202.9813.0103.1003.1903.2813.3403.3813.4583.5173.5763.6973.7583.8164.0664.1914.3104.5504.7905.0305.2665.5065.6565.7465.9866.2266.4666.7066.9307.1807.6608.1608.6608.9109.1609.660
±.006
±.008
.068
.086
.103
.120
.139
.174
.209
.045
.045
.048
.049
.050
.052
.054
.055
.056
.057
.058
.060
.061
.063
.066
.068
.070
.071
.072
.073
.075
.077
.078
.080
.081
.083
.085
.087
.089
.090
.092
.095
.100
.105
.110
.117
.122
.127
.132
.137
.142
.147
.160
.170
.156
.187
.250
.250
.250
.250
.250
.375
.437
.562
.656
.750
.750
.875
39404010535054705680579063006400650066006700680069008460884090309230942096309800
100001029010570119701212012300126001280013200134701365015000155001620016480171102059021790230102362524000303103376036840399204310044500455004670049900510005259055600
+.004-.000
+.005-.000
+.005-.000
+.005-.000
+.008-.000
+.008-.000
+.006-.000
RING
THRUST
CAPACITY
LBS.
FREE GAP
MIN. MAX.
GROOVE DIA. WIDTH NOM.
C Tol. A DEPTH
BXAN196XAN200XAN206XAN212XAN215XAN225XAN231XAN237XAN243XAN250XAN255XAN262XAN268XAN275XAN287XAN293XAN300XAN306XAN312XAN315XAN325XAN334XAN343XAN350XAN354XAN362XAN368XAN375XAN387XAN393XAN400XAN425XAN437XAN450XAN475XAN500XAN525XAN550XAN575 XAN590XAN600XAN625XAN650XAN675XAN700XAN725XAN750XAN800XAN850XAN900XAN925XAN950XAN1000
31
Page 32
ARCON RING AND SPECIALTY CORPORATIONOver Thirty Years of Service
Applicable Shaft0.4724" to 4.3307"
Standard MaterialCarbon Spring Steel
EXTERNALRETAINING
RINGS
ARCO
N
AR ON
PARTNUMBER
FREE GAP
MIN. MAX.
584594614639R698R740R823916R974R1065R1129R118512581308R13781407R1468R1517R1551R1572R2919R1625R
201202203204205206207208209210211212213214215216217218219220221222
301302303304305306307308309310311312313314315316317318319320321322
403404405406407408409410411412413414415416417418419420421422
.4724
.5906
.6693
.7874
.98431.18111.37801.57481.77171.96852.16542.36222.55912.75592.95283.14963.34653.54333.74023.93704.13394.3307
12.0015.0017.0020.0025.0030.0035.0040.0045.0050.0055.0060.0065.0070.0075.0080.0085.0090.0095.00
100.00105.00110.00
.421
.538
.616
.710
.9101.0931.2651.4521.6251.8201.9952.1872.3592.5562.7502.9463.1393.3083.5003.6973.8884.080
+.000-.025
+.000-.031
+.000-.046
+.000-.062
+.000-.078
+.000-.093
.062 ±.003
.078±.003
.093 ±.003
.109 ±.003
.125 ±.005
.156±.005
.188±.005
.218±.005
.250±.005
.312±.005
.042
.047
.062
.075
.093
.109
.125
.156
.436
.550
.629
.731
.9241.1111.2881.4651.6481.8442.0152.2122.3892.5862.7832.9793.1763.3433.5403.7373.9344.131
±.002
±.004
±.006
.046.053
.068
.085
.108
.120
.139
.174
.018
.020
.028
.030
.035
.045
.055
.062
.075
.085
.100
.062
.078
.156
.250
.250
.250
.312
.312
.187
.218
.312
.406
.468
.500
.625
.687+.008-.000
+.004-.000
+.004-.000
+.005-.000
+.000-.020
+.003-.000
+.004-.000
+.005-.000
+.006-.000
BASIC BEARING NUMBER
RING DIMENSIONS FREE DIAMETER WIDTH THICK
D Tol. W Tinches inches ±.005 ±.002
GROOVE DIA. WIDTH NOM.
C Tol. A DEPTH
B
S SHAFT DIA. ORBEARING BORE
Decimal Equiv.
32
Page 33
ARCON RING AND SPECIALTY CORPORATIONOver Thirty Years of Service
Applicable Shaft0.8661" to 9.4488"
Standard MaterialCarbon Spring Steel
EXTERNALRETAINING
RINGS
ARCO
N
AR ON
PARTNUMBER
1957743-4781-220462976-1939-295410391117-23918-11245-622611356-73919-11438-51490-51534-43920-11598-11642-331261675-416931706-31730-53921-11744-51764-11773-21787-11849-12165-23922-13923-13924-13925-13926-1
102103
104105
106107108
109110
111112113114115
116117118119120121122124
126128
1 30
1 32
37-38200201202
203
204205
206
207
208209210
211212
213214215216
217218219220221222
224
226
300301
302303304
305
306
307
308
309310
311
312313
314315316317318319
320321
322
403
404
405
406
407408
409
410411
412413
414415416417
418
223032353740424752556268727580859095
100110115120125130140145150160170180190200210215225230240
.86611.18111.25981.37801.45671.57481.65351.85042.04722.16542.44092.67722.83462.95283.14963.34653.54333.74023.93704.33074.52764.72444.92135.11815.51185.70875.90556.29926.69297.08667.48037.87408.26778.46468.85839.05519.4488
.7991.0941.1721.2911.3541.4851.5501.7411.9432.0562.3222.5272.6842.8032.9993.1963 3923.5903.7864.1804.3774.5064.7034.9005.2945.4915.6886.0816.4136.8077.2007.5947.9878.1848.5788.7759.168
+.000-.020
+.000-.030
+.000-.046
+.000-.062
+.000-.093
+.000-.125
+.000-.156
.094
.125
.156
.188
.281
.375
.042
.065
.095
.109
.120
.81251.1091.1871.3061.3691.5001.5651.7561.9582.0712.3472.5522.7092.8283.0243.2213.4173.6153.8114.2054.4024.5364.7334.9305.3245.5215.7186.1116.4436.8377.2307.6248.0188.2158.60838.80519.1988
1.0001.3591.4371.5471.6091.7501.8122.0622.2652.3752.6562.9223.0783.2033.4063.5943.7973.9844.1874.5784.7815.0945.2975.5005.8906.0786.2816.6727.1877.5947.9848.3758.7668.9699.3289.5629.953
1/8 max.
3/32
±1/32
1/8
±1/32
5/32
±3/64
3/16
±1/16
9/32
±1/16
3/8
±1/16
15/32
±3/32
.035
.050
.060
.075
.090
2.75.66.06.67.07.87.8
11.012.112.821.929.130.832.134.236.756.559.762.168.772.2
128.8136.0139.5150.4155.0160.9171.7267.4284.4300.1309.1319.0338.4349.0362.0375.4
+.000-.015
RING DIMENSIONS—FREEFREE I.D. WIDTH THICK
I.D. Tol. W T±.005 ±.002
GROOVE DIA.C
ASSEM-BLED O.D.
O
GAP
XX G
RADIUSMAX
R
WEIGHTPER
M
BEARING O.D.
(M.M.) InchesD D
BEARING NUMBER
Extra Light Med. HeavyLight
33
Page 34
ARCON RING AND SPECIALTY CORPORATIONOver Thirty Years of Service
NAN
Applicable Housing0.375" to 2.688"
Standard MaterialCarbon Spring Steel
INTERNALRETAINING
RINGS
ARCO
N
AR ON
RING FREE DIAMETER WIRE SECTION
D Tol. W Tinches inches ±.005 ±.002
PARTNUMBER
RING
THRUST
CAPACITY
LBS.NAN37NAN43NAN50NAN51NAN56NAN62NAN68NAN75NAN77NAN81NAN87NAN90NAN93NAN100NAN102NAN106NAN112NAN118NAN125NAN131NAN137NAN143NAN145NAN150NAN156NAN162NAN165NAN168NAN175NAN181NAN185NAN187NAN193NAN196NAN200NAN206NAN212NAN218NAN225NAN231NAN237NAN244NAN250NAN253NAN256NAN262NAN268
3/87/161/2
–9/165/8
11/163/4
–13/16
7/8
–15/16
1–
11/16
11/8
13/16
11/4
15/16
13/8
17/16
–11/2
19/16
15/8
–111/16
13/4
113/16
–17/8
115/16
131/32
221/16
21/8
23/16
21/4
25/16
23/8
–21/2
217/32
29/16
25/8
211/16
.375
.438
.500
.512
.562
.625
.688
.750
.777
.812
.875
.901
.9381.0001.0231.0621.1251.1881.2501.3121.3751.4381.4561.5001.5621.6251.6531.6881.7501.8121.8501.8751.9381.9682.0002.0622.1252.1882.2502.3122.3752.4402.5002.5312.5622.6252.688
9.5311.1212.7013.0014.2715.8817.4819.0519.7420.6222.2322.8823.8225.4025.9826.9728.5830.1731.7533.3234.9336.5236.0838.1039.6741.2841.9942.8744.4546.0247.0047.6349.2249.9950.8052.3753.9855.5557.1558.7260.3361.9863.5064.2865.0766.6768.27
.400
.467
.530
.542
.600
.670
.733
.799
.827
.867
.934
.9611.0031.0701.0941.1341.2021.2701.3371.4041.4721.5351.5571.6071.6681.7361.7651.8041.8701.9331.9752.0002.0682.0982.1312.1972.2602.3312.3932.4592.5232.5922.6532.6882.7262.7902.856
+.020-.000
+.025-.000
+.031-.000
+.046-.000
.035±.003
.040±.003
.048±.003
.062±.003
.078±.003
.093±.003
.109±.003
.125±.005
.141±.005
.156±.005
.171±.005
.187±.005
.025
.035
.042
.050
.062
.078
.093
.395
.462
.524
.536
.590
.657
.720
.786
.813
.852
.919
.945
.9861.0521.0751.1141.1811.2481.3141.3801.4471.5101.5321.5761.6421.7091.7371.7761.8421.9041.9461.9712.0382.0682.1002.1662.2292.2962.3582.4242.4872.5562.6162.6512.6862.7502.816
±.003
±.005
±.006
.028
.039
.046
.056
.068
.086
.103
.010
.012
.014
.016
.018
.020
.022
.024
.026
.028
.030
.032
.034
.036
.038
.040
.042
.044
.046
.048
.050
.052
.054
.056
.058
.060
.062
.125
.187
.281
.375
.437
.500
.562
.218
.344
.438
.562
.687
.750
.812
250300470480510620700750
102010901130126013601470150017801880199020902200230024602490256030603190324033703510364037103760387039354000438051405470563057905950627063506510840086508800
+.003-.000
+.003-.000
+.004-.000
+.005-.000
+.005-.000
+.003-.000
+.003-.000
HOUSINGDIAMETER S
Frac. Dec. mminch inch
FREE GAP
MIN. MAX.
GROOVE DIA. WIDTH NOM.
C Tol. A DEPTH
B
This style only on R-NAN 37 thru R-NAN 75
34
Page 35
ARCON RING AND SPECIALTY CORPORATIONOver Thirty Years of Service
NAN
Applicable Housing2.717" to 10.000"
Standard MaterialCarbon Spring Steel
INTERNALRETAINING
RINGS
ARCO
N
AR ON
HOUSINGDIAMETER S
Frac. Dec. mminch inch
RING FREE DIAMETER WIRE SECTION
D Tol. W Tinches inches ±.005 ±.002
PARTNUMBER
–23/4
213/16
–27/8
333/16
31/8
35/32
31/4
–315/32
31/2
–39/16
35/8
33/4
37/8
315/16
441/8
41/4
–47/16
41/2
45/8
43/4
551/4
53/8
51/2
53/4
661/4
61/2
65/8
63/4
771/4
71/2
881/4
81/2
83/4
9–
91/2
927/32
10
2.7172.7502.8132.8342.8753.0003.0623.1253.1563.2503.3463.4693.5003.5433.5623.6253.7503.8753.9384.0004.1254.2504.3304.4364.5004.6254.7505.0005.2505.3755.5005.7506.0006.2506.5006.6256.7507.0007.2507.5008.0008.2508.5008.7509.0009.0559.5009.840
10.000
68.8369.8571.4572.0073.0076.2077.7879.3880.1682.5585.0088.0088.9090.0090.4792.0895.2598.42
100.00101.60104.77107.95110.00112.69114.30117.48120.65127.00133.35136.53140.00146.05152.40158.75165.00168.27171.45177.80184.15190.50203.20209.55215.90222.25228.60230.00241.30250.00254.00
2.8822.9182.9853.0063.0563.1813.2473.3113.3423.4423.5393.6633.7003.7453.7663.8313.9624.0894.1564.2214.3554.4854.5654.6704.7444.8755.0115.2655.5305.6605.7966.0506.3096.5686.8326.9757.1007.3507.6307.8908.4008.6658.9159.2059.4559.5099.955
10.29510.455
+.062-.000
+.078-.000
+.093-.000
+.125-.000
+.156-.000
+.187-.000
.187
.218
.250
.281
.312
.343
.375
.437
.500
.093
.109
.125
.156
.187
2.8422.8782.9452.9663.0113.1363.2023.2653.2963.3943.4903.6133.6483.6913.7103.7733.9024.0274.0944.1564.2854.4104.4904.5964.6644.7954.9265.1805.4355.5655.6965.9506.2046.4586.7126.8456.9707.2207.5007.7508.2508.5408.7909.0809.3309.3849.830
10.17010.330
±.006
±.007
±.008
.103
.120
.139
.174
.209
.064
.066
.068
.070
.072
.074
.076
.078
.080
.082
.085
.088
.090
.092
.095
.098
.100
.102
.104
.106
.110
.125
.145
.165
.562
.625
.718
.875
1.000
1.125
1.375
1.625
1.750
.812
.875
1.062
1.312
1.500
1.812
2.250
2.500
2.625
887589509100925094009550
10470106901080011120114501187011970121201219012380126001282013230136901411014540149601517015390158301625017110205902111021790225702355029420306103140032640348503806039450419604332044710489004974050050525205378055400
+.006-.000
+.006-.000
+.006-.000
+.005-.000
+.005-.000
RING
THRUST
CAPACITY
LBS.
FREE GAP
MIN. MAX.
GROOVE DIA. WIDTH NOM.
C Tol. A DEPTH
B+.046-.000
35
NAN271NAN275NAN281NAN283NAN287NAN300NAN306NAN312NAN315NAN325NAN334NAN346NAN350NAN354NAN356NAN362NAN375NAN387NAN393NAN400NAN412NAN425NAN433NAN443NAN450NAN462NAN475NAN500NAN525NAN537NAN550NAN575NAN600NAN625NAN650NAN662NAN675NAN700NAN725NAN750NAN800NAN825NAN850NAN875NAN900NAN905NAN950NAN984NAN1000
Page 36
ARCON RING AND SPECIALTY CORPORATIONOver Thirty Years of Service
IN
Applicable Housing1.750" to 3.625"
Standard MaterialCarbon Spring Steel
INTERNALNOTCHED
RINGS
ARCO
N
AR ON
RING FREE DIAMETER WIRE SECTION
D Tol. W Tinches inches ±.005 ±.002
PARTNUMBER
GAP
G Min.
THRUST
LOAD
LBS.
IN175IN181IN185IN187IN193IN200IN206IN206IN212IN218IN218IN225IN231IN237IN244IN250IN253IN256IN262IN268IN268IN275IN281IN281IN287IN295IN300IN306IN312IN315IN315IN325IN334IN347IN350IN354IN354IN362
13/4
113/16
–17/8
115/16
223/64
21/16
21/8
–23/16
21/4
25/16
23/8
–21/2
217/32
29/16
25/8
–211/16
23/4
213/16
–27/8
–3
31/16
31/8
–35/32
31/4
311/32
315/32
31/2
–39/16
35/8
1.7501.8121.8501.8751.9382.0002.0472.0622.1252.1652.1882.2502.3122.3752.4402.5002.5312.5622.6252.6772.6882.7502.8122.8352.8752.9533.0003.0623.1253.1493.1563.2503.3463.4693.5003.5433.5623.625
44.4546.0247.0047.6349.2050.8052.0052.3753.9855.0055.5557.1558.7260.3361.9863.5064.2965.0766.6868.0068.2569.8571.4272.0073.0375.0076.2077.7779.3879.9880.1682.5584.9988.1188.9090.0090.4792.08
1.8781.9421.9822.0142.0812.1472.2012.2012.2712.3382.3382.4022.4702.5372.6042.6732.7062.7392.8062.8682.8682.9443.0253.0253.0863.1753.2223.2883.3533.3883.3883.4883.5903.7213.7603.8053.8053.895
+.070-.000
+.080-.000
+.100-.000
.156
.171
.188
.203
.218
.234
.062
.078
.093
.109
1.8581.9221.9621.9892.0562.1222.1712.1862.2512.2952.3182.3822.4502.5172.5842.6482.6812.7142.7812.8372.8482.9142.9803.0053.0513.1353.1823.2483.3153.3413.3483.4463.5463.6753.7103.7553.7763.841
±.005
±.006
.068
.086
.103
.120
.054
.055
.056
.057
.059
.061
.062
.063
.065
.066
.069
.071
.072
.074
.075
.076
.078
.080
.082
.084
.085
.088
.091
.091
.093
.095
.096
.098
.100
.103
.105
.106
.107
.108
.370
.400
.420
.450
.430
.470
.450
.470
.530
.560
.590
.660
.620
.650
.680
.710
.740
.810
.740
.078
.085
.093
.100
.109
.120
.093
.125
410042804380465050005350649064906810724072407560812085808940941096609910
1042010900109001147012200122001287013480138901449015110154201542016210170301819018700194001940019930
+.005-.000
+.005-.000
+.004-.000
+.005-.000
HOUSINGDIAMETER S
Frac. Dec. mminch inch
NOTCH DEPTH WIDTH
ND NW+.000 Ref.-.030
GROOVE DIA. WIDTH NOM.
C Tol. A DEPTH
B
36
Page 37
ARCON RING AND SPECIALTY CORPORATIONOver Thirty Years of Service
IN
Applicable Housing3.740" to 10.000"
Standard MaterialCarbon Spring Steel
INTERNALNOTCHED
RINGS
ARCO
N
AR ON
PARTNUMBER
GAP
G Min.
THRUST
LOAD
LBS.
IN375IN375IN387IN393IN400IN412IN425IN433IN450IN462IN475IN475IN500IN525IN537IN550IN575IN600IN625IN650IN662IN675IN700IN725IN750IN775IN800IN825IN850IN875IN900IN925IN950IN975IN1000
–33/4
37/8
315/16
441/8
41/4
–41/2
45/8
–43/4
551/4
53/8
51/2
53/4
661/4
61/2
65/8
63/4
771/4
71/2
73/4
881/4
81/2
83/4
991/4
91/2
93/4
10
3.7403.7503.8753.9384.0004.1254.2504.3314.5004.6254.7244.7505.0005.2505.3755.5005.7506.0006.2506.5006.6256.7507.0007.2507.5007.7508.0008.2508.5008.7509.0009.2509.5009.750
10.000
95.0095.2598.43
100.00101.60104.78107.95110.00114.30117.48120.00120.65127.00133.35136.53139.70146.05152.40158.75165.10168.28171.45177.80184.15190.50196.85203.20209.55215.90222.25228.60234.95241.30247.65254.00
4.0304.0304.1654.2344.3004.4304.5554.6414.8154.9405.0705.0705.3405.6005.7355.8606.1206.3806.6406.9057.0457.1807.4457.7057.9758.2408.5058.7709.0359.3059.5649.833
10.10010.36510.630
+.100-.000
+.120-.000
+.150-.000
+.180-.000
+.220-.000
.250
.281
.312
.343
.375
.437
.500
.109
.125
.156
.187
3.9643.9744.1074.1744.2404.3654.4904.5714.7404.8654.9694.9955.2605.5205.6505.7706.0206.2706.5306.7906.9257.0557.3157.5757.8408.1008.3608.6208.8809.1449.4049.6689.930
10.19010.450
±.006
±.007
±.008
.120
.139
.174
.209
.112
.116
.118
.120
.122
.130
.135
.140
.145
.150
.152
.157
.162
.170
.175
.180
.185
.190
.197
.202
.209
.215
.220
.225
.740
.780
.810
.840
.910
.930
1.000
1.0301.0901.1201.1301.140
1.1501.1601.2001.2301.2701.3201.3701.4001.5001.6201.750
.125
.140
.156
.171
.187
.218
.250
.125
.125
.125
.125
.125
.125
.125
.125
.156
.156
.156
.156
.156
.156
.156
.156
.156
.156
.156
.156
.156
.156
.156
.187
.187
.187
.187
.187
.187
.187
.187
.187
.187
.187
.187
2138021380228802365024430251902596026450274902825029000290003310036070369303779039500412204453047970505805222055930597006490068700729007760081800873009240098000
103900109000114600
+.008-.000
+.008-.000
+.005-.000
+.006-.000
HOUSINGDIAMETER S
Frac. Dec. mminch inch
NOTCH DEPTH WIDTH
ND NW+.000 Ref.-.030
GROOVE DIA. WIDTH NOM.
C Tol. A DEPTH
B
RING FREE DIAMETER WIRE SECTION
D Tol. W Tinches inches ±.005 ±.002
37
Page 38
ARCON RING AND SPECIALTY CORPORATIONOver Thirty Years of Service
Applicable Housing1.1811" to 3.5433"
Standard MaterialCarbon Spring Steel
INTERNALRETAINING
RINGS (METRIC)
ARCO
N
AR ON
PARTNUMBER
738-1721-1725-1R775744
2884-R837801793-R866846-1836-R913-1886887
1880-4932-1
3068-11026-1
992-1981-R
1080-21080-21069-R1208-11208-111981343-3133113361433-114101415-R1483-11469-21472-5R1526-115211504
200
201
202
203
204
205
206
207
208
209
210
300
301
302
303
304
305
306
307
308
403
404
405
406
1.18111.18111.18111.25981.25981.25981.37801.37801.37801.45671.45671.45671.57481.57481.57481.65351.65351.65351.85041.85041.85042.04722.04722.04722.44092.44092.44092.83462.83462.83463.14963.14963.14963.34653.34653.34653.54333.54333.5433
29.9329.9329.9331.9331.9331.9334.9234.9234.9236.9236.9236.9239.9139.9139.9141.9041.9041.9046.8946.8946.8951.8851.8851.8861.8661.8661.8671.8371.8371.8379.8279.8279.8284.8184.8184.8189.7989.7989.79
1.2651.2651.2711.3491.3431.3651.468
1.4861.546
1.5641.6871.703
1.7651.781
1.968
1.9762.171
2.1792.562
2.5932.9682.9843.0003.2813.2963.3123.4843.5003.5003.6873.7033.750
+.031-.000
+.046-.000
+.062-.000
+.093-.000
.100*
.125
.109*
.100*
.125
.109*
.100*
.125
.140
.100*
.125
.140
.125
.156
.156
.125
.156
.156
.125
.156
.172
.156
.156
.172
.156
.187
.156
.187
.156
.187
.218
.156
.187
.218
.156
.187
.250
.031
.042
.062
.031
.042
.062
.031
.042
.062
.031
.042
.062
.042
.062
.042
.062
.042
.062
.042
.062
.093
.062
.093
.062
.093
.062
.093
.125
1.2431.2531.2511.3211.3311.3291.4401.4501.4581.5181.5281.5361.6541.668
1.7331.747
1.9301.9441.9512.1372.1412.1482.5302.5442.5652.9342.959
3.2493.274
3.4463.4713.4713.6433.6683.713
±.005
±.006
.035
.046
.068
.035
.046
.068
.035
.046
.068
.035
.046
.068
.046
.068
.046
.062
.046
.068
.046
.068
.103
.068
.103
.068
.103
.068
.103
.139
.031
.036
.035
.031
.036
.035
.031
.036
.040
.031
.036
.040
.047
.040
.047
.040
.047
.050
.045
.047
.050
.045
.052
.062
.050
.062
.050
.062
.050
.062
.050
.062
.085
.375
.437
.562
.687
+.093-.000
+.093-.000
+.080-.000
+.093-.000
GAP
AT MIN.FreeO.D.
BASIC BEARING NO.
Lt. Med. Hvy.
HOUSINGDIAMETER S
Frac. mminch
GROOVE DIA. WIDTH NOM.
C Tol. A DEPTH
+.004/-.000 B
RING FREE DIAMETER WIRE SECTION
D Tol. W Tinches inches ±.003 ±.002
38
Page 39
ARCON RING AND SPECIALTY CORPORATIONOver Thirty Years of Service
Applicable Housing3.9370" to 7.8740"
Standard MaterialCarbon Spring Steel
INTERNALRETAINING
RINGS (METRIC)
ARCO
N
AR ON
PARTNUMBER
GAP
AT MIN.FreeO.D.
1581-51573-122301634-31626-31627-221041661210319241683-21678-11701-11699-22008172017193033-12790-1173920131759-11754-22117-22656-11767-225811956322245702331-13960-22246-22034-618012127-1
211
212
213
214
215
216
217
218
219
220
221
222
309
310
311
312
313
314
315
316
317
318
319
407
408
409
410
411
412
413
414
416
3.93703.93703.93704.33074.33074.33074.72444.72444.72444.92134.92134.92135.11815.11815.11815.51185.51185.51185.90555.90555.90556.29926.29926.29926.69296.69296.69297.08667.08667.08667.48037.48037.48037.87407.87407.8740
100.00100.00100.00110.00110.00110.00120.00120.00120.00125.00125.00125.00130.00130.00130.00140.00140.00140.00150.00150.00150.00160.00160.00160.00170.00170.00170.00180.00180.00180.00190.00190.00190.00200.00200.00200.00
4.0934.140
4.5004.531
4.9374.9534.9375.1255.1565.1515.3125.3435.3555.7035.750
6.0936.1256.1566.5006.5506.5506.9376.9826.9377.3437.3807.3807.7187.7817.7828.1258.187
+.093-.000
+.125-.000
+.187-.000
.187
.250
.250
.187
.250
.250
.281
.250
.281
.312
.250
.281
.312
.250
.281
.312
.250
.281
.312
.250
.281
.312
.375
.312
.375
.312
.375
.312
.375
.093
.125
.093
.125
.109
.125
.109
.156
.109
.156
.109
.156
.109
.156
.109
.156
.125
.156
.125
.187
.125
.187
.125
.187
4.0624.107
4.4554.500
4.8844.9124.8945.0815.1095.1215.2785.3065.3185.6715.6995.7116.0656.0936.1056.4596.4976.5006.8926.9426.8927.2867.3367.3367.6807.7307.7308.0748.125
±.006
±.007
±.008
.103
.139
.103
.139
.120
.139
.120
.174
.120
.174
.120
.174
.120
.174
.120
.174
.139
.174
.139
.209
.139
.209
.139
.209
.062
.085
.062
.085
.080
.094
.085
.080
.094
.100
.080
.094
.100
.080
.094
.100
.080
.094
.100
.080
.094
.100
.125
.100
.125
.100
.125
.100
.125
.687
.875
1.125+.187-.000
+.093-.000
+.125-.000
BASIC BEARING NO.
Lt. Med. Hvy.
HOUSINGDIAMETER S
Frac. mminch
GROOVE DIA. WIDTH NOM.
C Tol. A DEPTH
+.004/-.000 B
RING FREE DIAMETER WIRE SECTION
D Tol. W Tinches inches ±.005 ±.002
39
Page 40
GROOVE DIA. WIDTH NOM.
C Tol. A DEPTH
B
11/8
11/4
13/8
11/2
15/8
13/4
17/8
221/16
23/16
25/16
27/16
29/16
331/4
31/2
33/4
441/4
41/2
43/4
551/4
53/4
661/2
771/4
71/2
8
1.1251.2501.3751.5001.6251.7501.8752.0002.0622.1872.3122.4372.5623.0003.2503.5003.7504.0004.2504.5004.7505.0005.2505.7506.0006.5007.0007.2507.5008.000
28.5831.7534.9338.1041.2844.4547.6350.8052.3755.5558.7261.9065.0776.2082.5588.9095.25
101.60107.95114.30120.65127.00133.35146.05152.40165.10177.80184.15190.50203.20
1.1961.3301.4601.6001.7251.8551.9902.1152.1772.3022.4322.5572.6823.1543.4043.6543.9044.1554.4294.6794.9295.1845.4345.9346.2206.7307.2407.5007.7608.285
+.031-.000
+.062-.000
+.078-.000
+.093-.000
+.125-.000
+.187-.000
.093±.003
.125±.005
.156±.005
.187±.005
.218±.005
.250±.005
.042
.062
.078
.093
1.1811.3101.4351.5801.7051.8301.9652.0902.1522.2772.4022.5272.6523.1243.3743.6243.8744.1254.3944.6444.8945.1445.3945.8946.1606.6607.1607.4107.6608.160
±.005
±.006
±.007
±.008
.046
.068
.086
.103
.028
.030
.040
.045
.062
.072
.080
.375
.437
.562
.625
.875
1.000
.562
.750
.938
1.062
1.437
1.750
110013601600190019301960209022002340270029003000320062506500670061007000910094009200900088008950900075006200610060005700
ARCON RING AND SPECIALTY CORPORATIONOver Thirty Years of Service
ND
Applicable Housing1.125" to 8.000"
Standard MaterialCarbon Spring Steel
INTERNALRETAINING
RINGS
ARCO
N
AR ON40
PARTNUMBER
ND112ND125ND137ND150ND162NDI75ND187ND200ND206ND218ND231ND243ND256ND300ND325ND350ND375ND400ND425ND450ND475ND500ND525ND575ND600ND650ND700ND725ND750ND800
+.005-.000
+.005-.000
+.003-.000
+.004-.000
RING
THRUST
CAPACITY
LBS.
FREE GAP
MIN. MAX.
HOUSINGDIAMETER S
Frac. Dec. mminch inch
RING FREE DIAMETER WIRE SECTION
D Tol. W Tinches inches ±.005 ±.002
Page 41
WIRE RETAINING RING QUOTE FORMFill this space in with your part number and revision so we may reference it on your quotation.
What quantities would you like us to quote on?:
1. __________________ 2. __________________ 3. __________________ 4. __________________
Choose one of the following options:m Internal Ringm External Ring
Choose one of the following options:m Dimensions in free statem Dimensions in assembled state
Choose one of the following options:m Material is roundm Material is squarem Material is rectangular
1.) Material Size and Tolerance? ________________________________________
2.) Material m Carbon Spring Steelm Music Wirem Stainless Steel
m 302m 316m 17-7
m Brassm Copperm Berylium Copperm Other ________________________________________
ARCON RING AND SPECIALTY CORPORATIONOver Thirty Years of Service
123 EASY STREET • CAROL STREAM, IL 60188
PHONE: 630-682-5252 • FAX: 630-682-5259TOLL FREE: 800-498-1462
www.arconring.com • [email protected]
ARCO
N
AR ON
41
Page 42
Flatness Requirement? ______________________________________________________________
Rockwell? ____________________________________________________________________________
Finish Requirement? (i.e., passivate, oil, plating) _______________________________________
Stress Relieve? _______________________________________________________________________
Special Requirements? _______________________________________________________________
______________________________________________________________________________________
______________________________________________________________________________________
______________________________________________________________________________________
Please provide the following contact information:
Name ___________________________________________________________________
Title ___________________________________________________________________
o Distributor o Manufacturer
Organization ___________________________________________________________________
Street Address ___________________________________________________________________
Address (cont.) ___________________________________________________________________
City ___________________________________________________________________
State/Province ___________________________________________________________________
ZIP/Postal Code ___________________________________________________________________
Country ___________________________________________________________________
Work Phone ___________________________________________________________________
Fax ___________________________________________________________________
E-mail ___________________________________________________________________
42
Page 43
Outer Diameter (O.D.)?
Inner Diameter (I.D.)?
EXTERNAL GAPS INTERNAL GAPS
#4
#15
Clip
Open
#36
#1
#6
#8
#10
#35
Standard Gap
#11Internal/External
43
Page 44
44ARCON RING AND SPECIALTY CORPORATION
Over Thirty Years of ServiceARCO
N
AR ON
COMPRESSIONSPRINGS
Manufactured from round, square orrectangular material, ferrous or non-ferrous, furnished with ground orunground ends.(Wire size: Min. = 0.005"Max. = 0.207")
EXTENSIONSPRINGS
Types of ends include machine halfand full loops, full loops over centeror on the side, double twisted,crossover swivel, or extended loopsto specifications.(Wire size: Min. = 0.010"Max. = 0.207")
TORSIONSPRINGS
Unlimited end configurations areachievable with the use of mult i -directional forming slides.(Wire size: Min. = 0.008"Max. = 0.250")
DOUBLE TORSIONSPRINGS
Automatic coiling assures accuracyand cost savings. Straight torsionends or ends formed to your exactrequirements.(Wire size: Min. = 0.005"Max. = 0.207")
Page 45
45ARCON RING AND SPECIALTY CORPORATIONOver Thirty Years of Service
FOURSLIDE WIRE ANDSTRIP FORMING
Complete in-house tooling assures ontime delivery at highly competitivepricing. Fabrication from strip0.005" to 0.125" thick and from0.025" to 2.000" wide or wire up to0.187" in diameter.
WIRE FORMS
The thousands of wire forms madethrough the years provide a fund ofpractical shortcuts and improvisationswhich are frequently time and money-saving. Parts can be fabricated from0.008" through 0.250" diameterwire in any temper.
METAL STAMPINGS
Our wide array of specialized equipmentwith stamping pressures to 60 tonscan ef fectively handle al l yourrequirements. Blanking and forming,plus secondary operations on materialup to 5/32" thick.
R E TA I N I N G / S N A PRINGS
Retaining rings are precision engineeredcomponents which, applied on shaftsor in bores, provide a shoulder thataccurately posit ions, locates, orretains other parts on an assembly.Round, square or rectangular materials.Minimum inside diameters of 0.093"to outside diameters to 24.0".(Wire sizes: 0.008" to 0.250")
ARCO
N
AR ON