1 Prep Uncoated Wood or Concrete* Remove old or peeling coatings with a stain and fnish stripper Clean with wood cleaner such as No. 63 All-In-One Wood Cleaner Rinse and allow wood to dry completely prior to applying coating 2 3 RESURFACES PROPERLY PREPARED WEATHERED WOOD AND CONCRETE ® Smooth Finish Textured or Extra Textured Finish ALWAYS Prepare Surface Before Coating Apply ADVANCED DeckOver Coating* Prefll cracks Apply 1st coat at 75 sq. ft. per gallon Apply 2nd coat at 75 sq. ft. per gallon 4 5 6 * See product label for more details behr.com Have a coating or product question? Visit behr.com or call 1-800-854-0133 Ext. 2 (U.S.). ©2018 Behr Process Corporation • 1801 St. Andrew Place • Santa Ana, CA 92705 U.S.A. C-DECK-OVER Item No. 50003180 REV. 12/18 UxaICEHEy00223kzU Project Checklist 1/2" Nap Roller Cover (for Smooth & Textured DECKOVER) Painter’s Tape Roller Frame & Extension Pole Extra Textured Roller Cover (for Extra Textured fnish) Stir Stick & Paint Tray Protective Equipment (gloves, goggles, etc.) Plastic Watering Can Stiff Bristle Brush Drop Cloth Nylon/Polyester Brush Hose or Pressure Washer Wood or Concrete Cleaners Concrete Surfaces: Paint Stripper to Remove Failing Coating (if necessary) Wood Surfaces: Stripper such as BEHR PREMIUM® Wood Stain & Finish Stripper to Remove Failing Coating (if necessary) Cover Photo Deck (top left) - Dark Walnut PFC-25, Deck (bottom left) - Cape Cod Gray SC-365, Dancing (bottom right) - Redwood SC-330 ADHESION • CRACKING RESISTANCE NOW DECK OVER ADVANCED