Resume of Mostafa(rev.9)

Page 1 of 12

Objective To build up dynamic career as a Mechatronics Engineer, utilizing my academic background aswell as experience to help my company and my country.

Key Qualification Total over 13 years of experience in different Engineering field and different countries. One &huff years in Qatar with international Engineering & Construction Company and 11 years inBangladesh.

I have completed, B.Sc. in Mechatronics Engineering

Experienced user of AutoCAD & 3ds MAX, also familiar with Lumion, Adobe Photoshop,CorelDraw, Corel video studio, Adobe Audition, LOGO soft Comfort, MS Word and MS Powerpoint.

Experienced in Mechanical & architected detailed drafting of 2D, 3D & Isometric design, usingby AutoCAD software.

Experienced in Presentation of Animation & Prospective Visualization (interior & Exterior),using by 3ds MAX

Experienced in PLC Programming for Automation System, using by LOGO soft Comfortsoftware.

Checking of all preliminary drawing Tender drawing and Construction Drawing.

AcademicDetails

2012B.Sc. in Mechatronics EngineeringCGPA - 3.22World University of Bangladesh (WUB)Govt. & University grand commotion (UGC) Approved, Dhaka, Bangladesh.

1998Diploma in Power Engineering (Automobile)First DivisionKushtia Polytechnic Institute, Kushtia.Bangladesh Technical Education Board (BTEB), Dhaka, Bangladesh.

1995Secondary School Certificate (Arts)First DivisionKasbiamajil A.H. High SchoolDhaka Education Board, Bangladesh

Mailing Address:Md. Golam MostafaMechanical EngineerDevelopment Design Consultant Ltd.47 Mohakhali C/A, Dhaka-1212, BangladeshMobile Bangladesh: 0088-01712220842,

E-mail: [email protected]

Résumé ofMUHAMMAD GOLAM MOSTAFA

Page 2 of 12

Work experience From April 2011 to Till DateDevelopment Design Consultant Ltd.47 Mohakhali C/A, Dhaka-1212, BangladeshJob status : Mechanical Engineer & Project CoordinatorCode No : 04-604

Description of Project :Name of assignment or project : Feasibility Study and Detail Engineering Design of

Ganges Barrage Study ProjectConsultant : Development Design Consultant Ltd.

In Association withBETS, BCL, ACE (BAN), DIVINE Associates, ACE(PAK), NASPAK, SMEC (AUS) & CWRC (CHINA)

Client : Bangladesh Water Development BoardLocation : Pangsha, Rajbari, Bangladesh

Main project features : Allied structures, embankments, hydraulic structures,barrage & allied structures, reservoir, guide bunds,RTWs, irrigation and drainage systems, hydraulicstructures, regulators, sluice gates, floodembankments, navigation lock, fish pass, hydropowerplant, gas transmission line etc.

Job Responsibility:As a Mechanical Engineer I use to design the various assignments assigned to DevelopmentDesign Consultant Ltd. I participated and participating are described below:

Mechanical Works:I have tasked the mechanical equipment ofganges Barrage Study Project including Radialgates, Slide fixed wheel gates, Stoplogs, hoistingsystem, gantry cranes, mobile crane and overheadbridge cranes ect.

Architectural design Works:I have done the Architectural design of gangesBarrage, barrage facilities area, tourism area,workshop Area ect. I have also completed theanimated visualization of ganges Barrage.

Coordinating Tasks: Support Project consultants with Project

Technical tasks. Co-ordinates team activities to ensure that projects meet goals of timing, quality. Performing general administrative duties for a

unit management team and broader team whenrequired.

Prepare technical project report. Monitoring and administration of time reports. Manage Team meeting ,workshop,

Teambuilding, internal conferences. Prepare presentations, briefing papers for

meetings.

Page 3 of 12

From January 2008 – April 2011Sanmar Properties Ltd.58, Agrabad C/A, Chittagong-4100, Bangladesh.Job status: CAD EngineerJob Location: Dhaka, Bangladesh

Job Responsibility:As a CAD Engineer I use to design the various assignments assigned toSanmar Properties Ltd. I participated and participating are described below:

Sanmar (Design and Development Deportment):Worked as CAD Technician various Architectural design in Draw 2D, 3D & 3D studio Max ofvarious national and private projects as follows:

Shovana:Worked as Exterior 3D of 15-storied ResidentialApartment Building at Nondankakon, Chittagong,Bangladesh.

Tasnim:Worked as Exterior 3D of 9-storied ResidentialApartment Building at Nizam road, Chittagong,Bangladesh.

Hatkhola Commercial:Worked as Exterior 3D of 15-storied Shopping cumResidential Apartment Complex Building at Dhaka,Bangladesh.

Ali General Hospital:Worked as Exterior 3D of 10-storied PrivetHospital at Dhaka, Bangladesh

Panchlaish:Worked as Exterior 3D of 10-storied ResidentialApartment Building at Chittagong, Bangladesh.

Page 4 of 12

Sanmar Tower-1:Worked as Exterior 3D of 18-storied Office Buildingof Sanmar Properties limited at Chittagong,Bangladesh.

Sanmar Sierra:Worked as Exterior 3D of 6-storied ResidentialApartment Building at Chittagong, Bangladesh.

RL Parkview:Worked as Exterior 3D of 13-storied ResidentialApartment Building at Chittagong, Bangladesh.

Mohanagar:Worked as Exterior 3D of Various storiedResidential & commercial Apartment BuildingComplex at Chittagong, Bangladesh.

Garden Grove:Worked as Exterior 3D of 9-storied ResidentialApartment Building at Nazam Road, Chittagong,Bangladesh.

Azam Elanza:Worked as Exterior 3D of 9-storied ResidentialApartment Building at Nasirabad, Chittagong,Bangladesh.

Golf Drive Renge:3D Animation of Golf Driver Range at Chittagong,Bangladesh.

Page 5 of 12

Probortok:Worked as Exterior 3D Presentation of 12-storiedcommercial come Residential Building at NasirabadChittagong, Bangladesh.

Sanmar Tower-2:Worked as Exterior 3D of 14-storied Office Buildingof Sanmar Properties limited at Gulshan-2, Dhaka,Bangladesh.

Grand Karim:Worked as Exterior 3D of 9-storied ResidentialBuilding at Khulshi, Chittagong, Bangladesh.

Santino:Worked as Exterior 3D of 6-storied ResidentialBuilding at 76, Devpahar, College Road,Chittagong, Bangladesh.

Amadora:Worked as Exterior 3D of 9-storied ResidentialBuilding at 56 KB Abdus Sattar Road, Rahmatgonj,Chittagong, Bangladesh.

Mandira:Worked as Exterior 3D and Working Drawing Detailof 6-storied Residential Building at 27, Schtist BabuLane, Patharghata, Chittagong, Bangladesh.

Ocean City:Worked as Exterior & interior 3D and Detail workingplan of Lift lobby, Office dining and toilet of SanmarProperties limited at Chittagong, Bangladesh.

Page 6 of 12

Monabi:Worked as interior 3D of Bed Room, Living Room,Kitchen, Toilet and Reception of apartment atKhulshi, Chittagong, Bangladesh.

Mayfair:Worked as interior 3D of Bed Room, Living Room,Kitchen, Toilet and Reception Building at Khulshi,Chittagong, Bangladesh.

Magnolia Reception:Worked as interior 3D of Reception of apartment atChittagong, Bangladesh.

Floriana Receiption:Worked as interior 3D of Reception of apartment atChittagong, Bangladesh.

Montoro Reception:Worked as interior 3D of Reception of apartment atChittagong, Bangladesh.

Park Velly Reception:Worked as interior 3D of Reception of apartment atChittagong, Bangladesh.

Silver Spring Reception:Worked as interior 3D of Reception of apartment atChittagong, Bangladesh.

Page 7 of 12

Casablanca Reception:Worked as interior 3D of Reception of apartment atChittagong, Bangladesh.

From September 2006 – November 2007IWI Limited. Ras Laffan, Qatar.

Job status: CAD & Piping Engineer

Description of Project :Employer : GS-DAEWOO Engineering & ConstructionContractor Job No. : EPSCC1/ EPSCC2Contractor Job No. : 7S19Project Name : Laffan Refinery ProjectOwner : Qatar PetroleumCompany : Qatar GasSite : Ras Laffan Industrial City, State of Qatar

The $800 mm project is a joint venture of QP(80%), Exxon Mobil (10%) and Total (10%). It hasplanned processing capacity of 146,000 barrels perday (bpd) of gas condensates. Laffan Refinery, is a100% export oriented project, will produce LPG,naphtha, heavy naphtha, kerosene and butaneusing North Field condensate.

Job Responsibility:As a CAD Engineer, I used to design various assignments which are assigned by GS-DAEWOO Sub Contractor IWI, I participated and participating are described below:

IWI Qatar (Fabrication Shop):Working as CAD Engineer various piping & Work Shop design in Draw 2D, 3D, 3DstudioMax &Pas Program Operating in this Project as follows below:

2D, 3D & detailing design IWI fabrication SS workshop at Ras Laffan, Qatar.

3D of MANIFOLD SKETCH FOR HYDRO TEST(G-HTM-01)

Pas Program: I am Working as minted & inputted the Drawing control, Pipe joint, Pipe spool, spool materialetc, in the pas program.

Page 8 of 12

From September 1999 to September 2006Development Design Consultant Ltd. Dhaka, Bangladesh.

Job status: CAD Technician

Job Responsibility:As a CAD Technician I use to design the various assignments assigned to DDC. Someprojects I participated and participating are described belowDDC Centre (Architectural Section):Worked as CAD Technician various Architectural design in Draw 2D, 3D & 3DstudioMax ofvarious national and private projects as follows:

Redesign, 3D of 20-storied Health Bhaban underMinistry of Health, Family Planning and Welfare atMohakhali, Dhaka,

3D of 15-storied Building, Dhaka Stock Exchange,Bangladesh

3D Animation of Flyover and RAJDHANIUNNAYAN KARTRIPAKKHA (RAJUK) at KurilIntersection, Dhaka.

3D of 13-storied Corporate Office Building of Deltalife insurance company limited at Plot No. 37, RoadNo. 45, Gulshan North Commercial Area. Dhaka.

3D of 15-storied Bangladesh Cancer Hospital andWelfare Home at 52/C Darus Salam, Mirpur,Dhaka-1216. Under MINISTRY OF HALTCH.

Page 9 of 12

3D of 8-storied Bangladesh Bank TrainingAcademy Complex at Mirpur Dhaka ofBANGLADESH BANK.

3D of 8-storied Bangladesh Bank at Barisal ofBANGLADESH BANK.

3D of 20-storied Family Planning Services Bhabanat Kawran Bazar, Dhaka. Under MINISTRY OFHEALTH AND FAMILY WELFARE.

3D of 17-storied IEB Bhaban under Institute ofEngineers Bangladesh (IEB), Ramna, Dhaka.

3D of Three Railway station building (Srimangal,Bharmanbaria and Kulaura) under Government ofthe People’s republic of Bangladesh Ministry ofCommunication, Roads and Railway DivisionBANGLADESH RAILWAY Office of the E.N.C.Project. Chittagong.

3D Animation of 20-storied Health and PopulationBhaban under Ministry of Health, Family Planningand Welfare at Mohakhali, Dhaka,

Page 10 of 12

3D Animation of 10-storied Shopping cumResidential Apartment Complex for teachers ofDhaka University at campus premises.

3D Animation of Atrium space of 5-Star HotelSheraton, Dhaka, Bangladesh under the projectExpansion of Dhaka Sheraton Hotel.

Preparation of 2D & 3D Drawings for proposal of International Competition on DuxtonPlain Housing Project under Singapore National Housing Board.

Preparation of 2D Working Drawings for Mechanical, Fire Fighting and Air Conditioningsystems of 12-storied Office Building for Bangladesh Bank, Barisal.

Preparation of 2D Working Drawings for Mechanical, Fire Fighting and Air Conditioningsystems for proposed 12-Storied New Academic Building of Bangladesh University ofEngineering & Technology (BUET), Palashi, Dhaka.

S1-CMMU PACKAGE:Working as CAD Technician in the design of S1-CMMU PACKAGE: Baseline/ Repeat surveyof existing health & family welfare. Government of the People’s Republic of Bangladesh.

THREE BRIDGE PROJECT:

Working as CAD Technician in the design of three bridges project which include 1.63kmMukterpur bridge on Dhaka Munshiganj road, 423m length Third Buriganga bridge at Bashila,and 302m length Second Sitalakhya bridge at Demra.

Cemex Cement (BD) Limited:Worked as CAD Specialist in the Cement Factory project at Mahmudnagar, Narayanganj forCemex Cement (BD) Ltd. and responsible for the structural drawing of steel structures & trussfor conveyor belt, jetty, silo, production room, office building etc. using AutoCAD Software.

Bhairab Bridge Project:Worked as CAD Specialist in the design of Bhairab bridges project witch toll plaza building thatis, canopy, police station, control and maintenance building, substation, and control of Bhairabbridge. Responsible for the Structural and Architectural system drawing using AutoCADSoftware.

The City Bank Limited:Worked as CAD Specialist in the design of proposed 35-storied office building of The City BankLtd. at Dilkusha, Dhaka and responsible for the layout plans, structural and service drawingsusing AutoCAD Software.

Palli Karma Shahayak Foundation (PKSF):

Worked as CAD Specialist for Corporate Proposed 21 Storied Office Complex of Palli KarmaSahayak Foundation (PKSF) at Agargaon, Dhaka. And responsible for the Structural andMechanical system drawing using AutoCAD Software

Page 11 of 12

Bangladesh General Insurance Company (BGIC):Worked as CAD Specialist for Corporate Proposed 20 Storied commercial Building ofBangladesh General Insurance Company (BGIC) at Topkhana Road, Dhaka. And responsiblefor the structural drawing using AutoCAD Software.

Rupsha Bridge Project:

Worked as CAD Technician for Rupsa Bridge Construction Project Preparation of the detaildrawing of Main Bridge, Canal Bridge, Box Culvert and Roads using Auto CAD Software; AJoint venture between Leading Consultant DDC Ltd. (Bangladesh), PACIFIC CONSULTANTINTERNATIONAL (Japan) and CONSULTING ENGINEERS SERVICES (India).

Other Experiences CATSELComputer Aided Technical Service Ltd:Working as my personal office responsibilities of making Architect, engineering, GIS &Graphics. Presentation drawings using AutoCAD 2D, 3D, CorelDraw, Adobe Photoshop & 3DStudio Max from: June 2003 to till date.Some projects I participated and participating are described below.

Vestige Architects, Dhaka, Bangladesh:Working as part time Architect with responsibilities of making presentation drawings usingAutoCAD 2D, 3D, CorelDraw & 3D Studio Max from: October 2002 to March 2003.

Consulting Services Associates Limited, Dhaka, Bangladesh:Working as part time Architect with responsibilities of making presentation drawings usingAutoCAD 2D, 3D, CorelDraw & 3D Studio Max from: September 2001 to September 2002.

ACS. Computers, Dhaka, Bangladesh:Worked as part time teacher/instructor of AutoCAD 2D, 3D & 3D Studio Max to trainees ofGraduate and Diploma Engineers to from: February 2000 to July 2001.

Page 12 of 12

Training Attended Industrial Attachment:Successfully attended and completed industrial attachment at Kushtia Sugar Mill for twomonths.

Computer Skills Software and Packages:Experienced user of AutoCAD & 3ds MAX, also familiar with Lumion, Adobe Photoshop,CorelDraw, LOGO soft Comfort, MS Word and MS Power point. Trained from DEVELOPMENTDESIGN CONSULTANT LTD. in Bangladesh.

Languages Speak, Read and Write: Bengali & English.

Personal Details Father’s Name : Md. Golam NokiMother’s Name : Mrs. Ambia BegumDate of Birth : 30th December, 1979Nationality : Bangladeshi (by birth)Religion : Islam (Sunni)Sex : MaleMarital Status : Married

References 1. AKM NASIRUDDINDIRECTORDevelopment Design Consultants Limited.Tel : Off. 8815231

PABX 8822980, 9883374 Res. 9661689

Mobile : 018-240588Fax : 880-2-8810337E-mail : [email protected], [email protected]

2. Ishtiak Ahmed TtaslimPrincipal ArchitectDesign & Development DepartmentSanmar Properties Ltd.Tel : Off. 088-02-8836944, 088-02-9892120, EXT. 119Mobile : 088-01713376431E-mail : [email protected]

Declaration of Authenticity:I certify that all information stated in the curriculum vitae is true and complete to the best of my knowledge. If requiredand where applicable, this information can be supported by appropriate & authentic certificates/papers.

Muhammad Golam Mostafa