Resume of Dr. V Venkata Basava Rao 1. Name Vudata Venkata Basava Rao (Surname) (Middle Name) (First Name) 2. Do you belong to a reserved category: Other Backward Caste BC (B) Padmashali 3. Academic Record from Undergraduate Degree Degree Specialisation University/Institute Year of Completion Marks & Division Rank B.Tech Chemical Engineering Andhra University 1986 68%, First M.Tech Chemical Plant Design and Fabrication IIT-Kharagpur 1988 74.4%, First PhD Chemical Engineering IIT-Kharagpur 1991 4. Academic Experience (a) Teaching Experience Duration Organisation Area(s) May 1995 to August 1997 (2 years 3 months) JNTU College of Engineering, Ananthapur Chemical Engineering August 1997 to till date (19 years 8 months) University College of Technology, Osmania University, Hyderabad Chemical Engineering (b) Courses Taught Course Number & Title UG Level / PG Level Years of taught Whether course developed by you Mass Transfer Operations-I and II UG 15 Modifications made Chemical Engineering Thermodynamics-I and II UG 5 Modifications made Process Dynamics and Control UG 2 Process Equipment Design UG 2 Chemical Engineering Fluid Mechanics UG 2 Fluidization Engineering UG 2 Corrosion Engineering UG 2 Separation Processes PG 16 Modifications made Air and Water Pollution Engineering PG 4 Yes Attach p
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Resume of Dr. V Venkata Basava Rao
1. Name Vudata Venkata Basava Rao
(Surname) (Middle Name) (First Name)
2. Do you belong to a reserved category:
Other Backward Caste BC (B) Padmashali
3. Academic Record from Undergraduate Degree
Degree Specialisation University/Institute Year of
Completion
Marks &
Division
Rank
B.Tech Chemical Engineering Andhra University 1986 68%, First
M.Tech Chemical Plant Design and Fabrication
IIT-Kharagpur 1988 74.4%, First
PhD Chemical Engineering IIT-Kharagpur 1991
4. Academic Experience (a) Teaching Experience
Duration Organisation Area(s)
May 1995 to August 1997
(2 years 3 months)
JNTU College of Engineering,
Ananthapur
Chemical Engineering
August 1997 to till date
(19 years 8 months)
University College of
Technology, Osmania
University, Hyderabad
Chemical Engineering
(b) Courses Taught
Course Number & Title UG Level / PG
Level
Years of
taught
Whether course
developed by you
Mass Transfer Operations-I and II UG 15 Modifications made
Chemical Engineering
Thermodynamics-I and II
UG 5 Modifications made
Process Dynamics and Control UG 2
Process Equipment Design UG 2
Chemical Engineering Fluid
Mechanics
UG 2
Fluidization Engineering UG 2
Corrosion Engineering UG 2
Separation Processes PG 16 Modifications made
Air and Water Pollution
Engineering
PG 4 Yes
Attach
p
assport size
photo
Environmental Impact and
Assessment
PG 4 YES
Design of Experiments PG 2
5. Research Experience (a) Experience after PhD (Post-Doctoral)
Organisation Period from To Duration (years)
JNTU college of Engineering,
Anathapur
May 1995 August
1997
2 years and 3 months
University College of Technology,
Osmania University, Hyderabad
August
1997
Till Date 19 Years 8 Months
(b) Sponsored Research Projects
Year of
Funding
Sponsoring
Organisation
Title of Project Amount
of
Grant
Co-Investigators
(if any)
1996 AICTE Combustion studies of
Rice Husk in Circulating
Fluidized Bed
5 lakhs No
2006 AICTE Modelling and Evaluation
of Reaction Separations
7 Lakhs No
2012 DST-PURSE Experimental
investigations on
Fluidization behavior of
Nano Powders
8 Lakhs No
2015
TEQIP, CoE
Process Intensification in
Separation Operations:
Reactive Distillation and
Reactive Extraction
Rs. 12
Lakhs
No
(c) Student Research – Masters Degrees
S.N
o.
Name of Student Year Title of Thesis
1
2
3
4
5
6
7
8
9
10
11
12
13
14
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
Mrs.N. Annapurna Devi
Mr. Shankar Naik
Mr. P. Jawahar Lal
Mr. S. Ashok Vardhan
Mr.D. Krishna Sandilya
Ms. E. Santhosha
Mr. Ch. Balakrishna
Mr. Ch. Siva Kumar
Mr. G. Srinivasa Rao
Mr. K. Bharath
Mr. V. Lakshminarayana
Mr. Md. Rayeez Ahamed
Mr. R. Gangadhar
Mr. K.Mahesh
Ms. M. Suneetha
Ms. P. Suneetha
Mr. P. Rajesh
Ms. A. Sravanthi
Mr. A. Rakesh
Ms. Shalini
Ms. Sandeepa
Mr. Majid Farajpourlar
Mr. Upendra
Mr. Sai Charan
Mr. Yellamanda
Ms. Dharanija
Mr. K. Raju
Mr. Dhileep Kumar
Ms. Mounika
Mr. Nageswara Rao
Mr. Y. Srinivasa Rao
Mr. Raju B
Ms. Youga Sree
Ms. Vijaya Kumari M
Ms. Tejaswani
Ms. Karunya
Ms. Sailaja B
Mr. Anil Kumar
1998
1999
2000
2001
2002
2003
2004
2005
2005
2006
2006
2006
2007
2008
2008
2008
2009
2010
2010
2011
2011
2012
2013
2014
2014
2015
2015
2015
2015
2015
2016
2016
2016
2016
2017
2017
2017
2017
Modelling of Circulating Fluidized bed Riser
Some Hydrodynamic Studies in Liquid-Solid Circulating Fluidized
Bed
Hydrodynamic Prediction in Liquid Solid Circulating Fluidized Bed
Adsorption Studies on Colour Removal from Textiles
Dyeing Industrial Effluents by using Different Adsorbents
Studies on Flow Structure of Liquid Solid Circulating Fluidized Bed
Modelling of Near Wall Flow Structure in Circulating Fluidized Bed
Hydrodynamics of Liquid Solid Fluidization in Tapered Beds
Studies on Reactive Distillation of Lactic Acid
Liquid Mixing Studies in Liquid Solid Circulating Fluidized Bed
Column Exhaust Studies in Adsorption of Dye from Textile
Effluents onto Low Cost Adsorption
Modeling, Simulation and Optimization of Fixed Bed Reactor for
Selective Hydrogenation of Phenol
Studies on Batch Reactive Distillation of Aqueous Acetic Acid and
Methanol System
Studies on Loop Pressure Profile in Circulating Fluidized Bed Risers
Studies on Heavy Metals Adsorption from Industrial Waste Waters
using Low Cost Adsorbents
Adsorption studies in fixed bed for Removal of Dye from Effluents
Studies on Reactive Distillation of Lactic Acid
Adsorption studies in fixed bed for Removal of Heavy metals from
Effluents
Drying studies of Mustard Seeds in Fluidized bed Dryer
Adsorption studies in Tapered bed for Removal of Dyes from
Effluents
Reactive Extraction Studies
Studies on Fluidized Bed Drying of Sorghum grains
Studies on Nitrate Removal from Aqueous effluents
Studies on Inverse Fluidization
Adsorption Studies in Tapered Bed
Adsorption Studies using Bentonite
Studies on Biosorption Characteristics of Karanja Seeds
Studies on Reactive Distillation of Propionic Acid
Studies on Reactive Extraction of Carboxylic Acid
Combustion Studies of Karanja Biomass in Fluidized Beds
Fluidization Studies in Tappered Gas-Solid Fluidized Beds
Adsorption Studies in tapered fixed Beds
Studies in Rotating Fluidized Bed with Static Geometry
Studies on Membrane Separations for Treatment of Petroleum
effluents
Studies on Gasification of Solid waste from Municipal waste
Experimental Investigation on Reverse Osmosis technique to treat
waste water
Reactive Extraction of Propionic acid from waste water
Esterification of waste oil using TPP technique
Column Exhaust Studies in Tappered Beds for removal of colour
(d) Student Research – Doctoral Degrees
S.No
.
Name of
Student
Year of
Completio
n
Title of Thesis Co-Supervisors
(if any)
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11
Mr. Md.
Hafeezuddin
Mr. T.
Balanarasaiah
Mr. S. Ram
Mohan Rao
Mr. Sharat Babu
Mrs. Akila
Swatanthra
Mr. Amar Arab
Mr. Prathap
Kumar
Mr. N. Anil
Mr. T. Mohan
Rao
Mrs. Anitha S
Mrs. Sunitha P
2009
(Awarded)
2009
(Awarded)
2010
(Awarded)
2012
(Awarded)
2012
(Awarded)
2012
(Awarded)
2012
(Awarded)
2011
(Awarded)
2016 {to be
Awarded)
2016
(Submitted)
2017
(submitted)
Biomass gasification, Pyrolysis and Combustion
Studies in Fluidized Bed
Hydrodynamics and Modelling of Circulating
Fluidized Bed
Adsorption Studies in Treatment of Waste
Water with low cost adsorbents
Experimental Studies on Batch Reactive
Distillation of Lactic Acid using Butanol
Adsorption Studies on Removal of Heavy
Metals from Aqueous effluents using low cost
Adsorbents,
Removal of Nitrates from Ground Water using
Ion Exchange Resin
Reactive Extraction Studies
Studies on Artificial Nureal Networks based
Controls
Studies on Biosorption of Congo Red Dyes
using Various Adsorption
RTD Studies in LSCFB and Tappered
Fluidized Beds
Reactive extraction of Carbolic Acids from
aqueous solutions
Prof. Pramod
Kumar (JNTU)
No
No
Prof. T.
Sankarshana
No
No
Dr.
Vishwanadham,
IICT
Dr. Ch
Venkateswarlu,
IICT
No
No
No
10. Consulting Experience Period Organisation Nature of Projects Co-Consultants
(if any)
1998-1999
2001-2005
2002-2005
2004-2005
2006-2007
APCOST,
Hyderabad
M/s. NTPC
Ramagundam
M/s. R.K. Carbons,
Hyderabad
M/S Winrock
International India,
Secunderabad-09
M/S Titan Energy
Systems Limited,
Secunderabad-15
Biomass Combustion in CFB
Boilers
Utilization of Flyash for
Adsorption of Heavy metals and
Dyes from effluents
Characterization of Activated
Carbon Adsorbent
Drying characteristics of Tomato,
curry leaves etc
Standardization of Process to
manufacture Vanadium (IV) &
Vanadium (III) Sulfate in 2M
Sulphuric Acid from Vanadium
Pentoxide
No
Mr. S. Ram Mohan Rao
Mr. S. Ram Mohan Rao
No
No
11. Industrial Experience Period Organisation Description of Work and Responsibilties
1991-1995 M/S. Bharat
Dynamics Limited,
(Ministry of
Defence), Bhanoor,
Medak, AP
Junior Manager,
Monitoring effluents treatment operations
of Electroplating plant and DM water
plant. Installation, Execution and
Supervision on electroplating operations
like Ag. Pd, Cu, Ni, Cr, Cd, Zn, Anodization
on Missile parts.
Over 20 operators were under
management. Major contribution is
establishment of Palladium, Chromium
and Hard Anodization Processes.
12. Administrative Experience Period Designation Nature of Responsibility
Dec’2016 to till
date
Head, Department of
Pharmacy
To look after the Academic programs of
Department of Pharmacy
Jan’2017 to till date Dean, Faculty of
Pharmacy
To plan the academic programs of
Faculty of Pharmacy
2015 to 2016 (1 Yr) Head, Department of
Technology
To look after the Academic programs of
Department of Technology
2013 to 2016 (3 Yrs) Dean, Faculty of
Technology
To plan the academic programs of
Faculty of Technology
2011 to 2013 (3 Yrs) Vice Principal, University
College of Technology, OU
To Look after the general administration
and assisting the Principal in general
administration
2010- 2015 (5 Yrs) Head, Department of
Chemical Engineering
To look after the academic activities of
UG and PG Courses of Chemical
Engineering
1999-2007
2010 to 2011 (9Yrs)
Director, Placement and
Training Cell
To look after placement and Industrial
Training Activities
2004-2005 (1 Yr) Officer Incharge of
Examinations
To look after conduct of UG and PG
examinations
1998-2003 (5 Yrs)
Officer, Incharge, Stores
and Purchase
To monitor the equipment purchasing
activities of the college
2004-2006 (2 Yrs) Chairman, Board of
Studies, (Global)
To revise the syllabus, and preparing the
Almanac of the programs in University
2010-2012 (2 Yrs) Chairman, Board of
Studies, (Autonomous)
To revise the syllabus, and preparing the
Almanac of the programs in College
2010 to till date Coordinator, TEQIP-II To look after TEQIP activities and
coordinating among the Nodal Officers
and SPFU
13. Present Position Designation Organisation Total Emoluments (Rs.)
Professor, Chemical
Engineering
University College of Technology,
Osmania University, Hyderabad-07
Rs. 1,81,715
14. Current Areas of Research Specialisation
Circulating Fluidized Bed Technology (both gas-solid and liquid-solid)
applications to environmental related problems,
Fluidization Behaviour of Nano-Powders in Tappered Columns
Process Intensification: Rotating Fluidized Bed with Static Geometry for Drying
Applications
Reactive Separation operations for Process Intensification, Divided Wall Column
distillation
Water and Wastewaters treatment by using various Adsorbents particularly Fly
ash 15. Publications (a) Papers in International Journals (those published by agencies outside India)
Published
1. “Distribution of Voidages in Circulating Fluidized Beds”, V. V. Basava Rao, R.K.Saha and